Transcript
A subsidiary company of
WE BUILD TRUST
WORKSHOPDIVISION
WORKSHOPDIVISION
WORKSHOPDIVISION
ABOUT US Mohammed. N. Al - Baddah & Partner General Trading & Contracting Co. W.L.L. is a Kuwaiti contracting company, specialized in Oil, Gas & Petro-Chemical sectors of Kuwait. MBTC is established in 1993 with capital of KD 1,000,000, as a subsidiary company of NBTC.
It carries certifications of ISO 9001-2008, ‘U’ & ‘PP’ stamps of The American Society of Mechanical Engineers (ASME), and ‘R’ & ‘NB’ stamps of The National Board of Boiler & Pressure Vessel Inspectors.
MBTC is a Grade -2 Contractor with The Central Tenders Committee of Kuwait and certified & approved by the Public Sector, Oil, Gas & Petro-Chemical companies, such as Kuwait Oil Company, Kuwait National Petroleum Company, Petro-Chemical Industries Company, Equate, Joint Operations, Saudi Arabian Chevron Inc. and Ministry of Electricity & Water and other Public Sector undertakings.
The activities of MBTC includes, among other things, a well established Engineering Workshop for Fabrication, Erection, Precision Machining, Electrical Motor Winding and Overhauling, Grit Blasting, Hot Dip Galvanizing and Painting with facilities at Shuaiba Industrial Area, Mina Abdullah and Ahmadi Industrial Area.
1
QUALITY & SAFETY
2
CORE ACTIVITY FABRICATIONPressure Vessel (‘R’, ‘U’, Stamps)Pressure Piping (‘PP’ Stamp)Structural (Fabrication & Site Erection)Tank (Construction, Repair & Maintenance)Pipe Spools, Hoppers, Silos
PRECISION MACHININGTurning, Boring, DrillingMilling, Broaching, SawingShaping, Planing, ReamingTapping , Tool & Dye Making
ELECTRICAL WINDINGRewinding & Overhauling ofA/c – D/c MotorsRig’s Elmago Break Unit, GeneratorTransformers & Compressors
SURFACE PREPARATIONHot Dip GalvanizingBlasting (Sand/ Grit/ Garnet)Painting
3
FABRICATION FACILITIESWORKSHOP 1 - SHUAIBA INDUSTRIAL AREAEstablished in a 10,000 sq.mt roofed area for Light, Medium and Heavy Fabrication and supported with fully fledged machine shop along with a Grit Blasting & Painting Facilities.
WORKSHOP 2 - MINA-ABDULLAHEstablished in an area of 18,000 sq.mt with 10,000 sq.mt roofed area for Medium and Heavy Fabrication and supported with a blasting booth and covered painting booth.
WORKSHOP 3 - AHMADI INDUSTRIAL AREAOne of the earliest established shop spread over 2500 sq.mt area. It accommodate a well equipped Machine Shop and Fabrication Shop for Light & Medium works. It also houses the Electrical Winding Shop which is specialized on rewinding and overhauling of motors, transformers, generators, compressors etc.
GALVANIZING PLANTFloor Space 2000 m2
Bath Capacity 1) 1.2 x 1.5 x 12.5 m 2) 1.2 x 1.5 x 6.5 mProcess Hot Dip GalvanizingCapacity 1100 tons/month
GRIT BLASTING PLANTFloor Space 2500 m2
Production Capacity 200 m2/hr.Blasting Chamber 1 x 2.5 m
EOT CRANES (16T, 10T, 8T, 5T) • Milling Machines • Plaining Machines Horizontal/Vertical Boring Machine • Radial Drilling Machines • Automatic SAW Welding Machine • Column & Boom Auto SAW Welding Machine Angle Crop Punch • Power Press (upto 100 ton) • Cutting MachinePlate Rolling Machine (upto 75 mm) • Pipe/Beam Profile Bending (upto 12”)
THE WORKSHOP IS EQUIPPED WITH
4
PRESSURE VESSELS
5
TANKS
6
STRUCTURALS
7
STRUCTURALS
8
PIPING
9
PIPING
10
STACKS
11
DUCTS
12
HOPPERS & SILOS
13
PRECISION MACHINING
14
PRECISION MACHINING
15
BLASTING & PAINTING
16
GALVANIZING
17
ELECTRICAL WINDING
18
SUPPPORT SERVICES
19
NBTC KuwaitP.O.Box 9088 Ahmadi - 61001
NBTC Saudi ArabiaP.O.Box 6866 Dammam - 31452
NBTC Abu DhabiP.O.Box 35731 Abu Dhabi
MBTC KuwaitP.O.Box 9088 Ahmadi - 61001
Tel: (965) 23260666 Ext: 405 I Fax: (965) 23260550E-mail: workshop@nbtcgroup.com I admin@nbtcgroup.com
www.nbtcgroup.com
top related