Transcript
8/11/2019 Mm Warehousemanagement Configuration
1/112
SAP MM/WMConfiguration Pack
Warehouse Management
Published by Team of SAPConsultants at SAPTOPJOBS
Visit us atwww.sap-topjobs.com
Copyright 2006-07@SAPTOPJOBS
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form, or by any means electronic ormechanical including photocopying, recording or any information storage and
retrieval system without permission in writing from SAPTOPJOBS
8/11/2019 Mm Warehousemanagement Configuration
2/112
INDEX
1. Define Warehouse Number ----------------------------------------------------------------- 3
2. Assign Warehouse Number to Plant/Storage Location ---------------------73. Define control parameter for warehouse---------------------------------------- 9
4. Define Number Ranges--------------------------------------------------------------- 145. Define Storage type-------------------------------------------------------------------- 206. Define Storage Sections-------------------------------------------------------------- 297. Define Picking Area-------------------------------------------------------------------- 32
8. Define Storage Bin Types----------------------------------------------------------- 359. Define Blocking Reason-------------------------------------------------------------- 3710. Define storage Bin Structure--------------------------------------------------- 3911. Activate Storage Type Search --------------------------------------------------- 4512. Activate storage section search------------------------------------------------ 5313. Activate Storage Bin Type Search --------------------------------------------- 5614. Put away and Picking Strategies---------------------------------------------- 59
15. Define Movement Types----------------------------------------------------------- 6816. Setup Automatic TO creation --------------------------------------------------- 74
17. Define Print Control ---------------------------------------------------------------- 8518. Activate Warehouse activity monitor objects------------------------------ 8919. Define Critical Parameters ------------------------------------------------------- 9120. Define Variant for program object overview ----------------------------- 9321. Define variants for selection programs -------------------------------------- 97
22. Define Posting Changes---------------------------------------------------------- 10423. Generate Interim Storage bins------------------------------------------------ 10724. Allow negative stocks in interim storage types -------------------------- 109
8/11/2019 Mm Warehousemanagement Configuration
3/112
1. Define Warehouse Number
BACKGROUND
This configuration setting enables us to define the Warehousenumber. Warehouse number uniquely identifies thewarehouse in the plant.
INSTRUCTIONS
Follow the Menu Path: IMG Enterprise Structure
Definition Logistics Execution Define, Copy, Delete,Check Warehouse number
1. Click
2. Double click
8/11/2019 Mm Warehousemanagement Configuration
4/112
3. Select the row
4. Click
5. Click
6. Click
7. double click
8/11/2019 Mm Warehousemanagement Configuration
5/112
8. Click
9. Enter from and To warehouse number as shown below.
10. Click
11. Click Yes
12. Message will appear after completion of copying
13. Click
14. Click
8/11/2019 Mm Warehousemanagement Configuration
6/112
Effect of this configuration
Warehouse number defined here is used throughout thewarehouse management module
8/11/2019 Mm Warehousemanagement Configuration
7/112
2. Assign Warehouse Number to Plant/StorageLocation
BACKGROUND
This configuration setting enables to assign the warehousenumber to Plant and storage location.
Each ware house has to be assigned to plant and storagelocation. More than one storage location can be assigned to a
warehouse number.
INSTRUCTIONS
Follow the Menu Path: IMG Enterprise Structure
Assignment Logistics Execution Assign Warehousenumber to Plant/Storage location
1. Click
1. Click
2. Maintain the entries as shown below
8/11/2019 Mm Warehousemanagement Configuration
8/112
3. Click
4. Click
5. Click
Effect of this configuration
Plant IND6 and storage location RM01 are assigned to thiswarehouse number.
8/11/2019 Mm Warehousemanagement Configuration
9/112
3. Define control parameter for warehouse
BACKGROUND
This configuration setting enables to define the controlparameter for warehouse number.
Control parameter governs
Default Unit Of Measure for Weight and Volume
Blocking of bin for simultaneous access Message control
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Master Data Define controlparameter for warehouse Number
1. Click
8/11/2019 Mm Warehousemanagement Configuration
10/112
2. Click at the bottom3. Enter warehouse number as IN6
4. click
5. Select the row by clicking grey box in the left
6. Click
7. Maintain the field as explained below
Field Name Field description and Value
Weight will be managed in this UOM
8/11/2019 Mm Warehousemanagement Configuration
11/112
maintained here in the warehouse.
Volume will be managed in this UOMmaintained here in the warehouse.
First alternate UOM to be used as a defaultin the warehouse. Following are the possible
entries.
Second alternate UOM to be used as adefault in the warehouse.
Tick in this check box indicates storage unitis active. Storage unit is the logical groupingof one or more material.
Permission to multiple users to access thesame material and same bin at any giventime. Possible entries are
Control to handle Material shortage forquantities to pick during Transfer Ordergeneration by multiple users. Possible entries
are
8/11/2019 Mm Warehousemanagement Configuration
12/112
During stock placement, capacity check ofstorage bin carried out by the system. Thisfield indicates the message control in case ofcapacity shortage.Possible entries are
System message control for missing batchnumber during transfer requirementcreation. Possible entries are
Note: - Batches can be determined duringposting transaction also.
Message control to handle the missingparameters during TO.
8. Click
8/11/2019 Mm Warehousemanagement Configuration
13/112
Effect of this configuration
Warehouse number control parameters are picked up fromthe configuration done here.
8/11/2019 Mm Warehousemanagement Configuration
14/112
4. Define Number Ranges
BACKGROUND
This configuration setting enables to define the number range.
In WM number ranges are required for
Transfer Requirement
Transfer Order
Quant
Posting change Group
Storage Unit
Each number range is warehouse specific. Let us look at thenumber range for Transfer order for understanding.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Master Data Define NumberRanges
1. Click
8/11/2019 Mm Warehousemanagement Configuration
15/112
2. Click
3. Enter Warehouse number. E.g. IN6 in this case
8/11/2019 Mm Warehousemanagement Configuration
16/112
4. Click to change the interval
Note: - Number ranges can be copied by clicking in thisscreen.
Note: - New number ranges can be added by clicking
5. Click two times
8/11/2019 Mm Warehousemanagement Configuration
17/112
Now, let us look at how to assign the number ranges.
6. Click
8/11/2019 Mm Warehousemanagement Configuration
18/112
7. Click
8. Enter warehouse number
9. Click
10. Maintain the number range as shown below
8/11/2019 Mm Warehousemanagement Configuration
19/112
Note: - Number range 01 is assigned to each transactionprocess.
11. Click
12. Click
8/11/2019 Mm Warehousemanagement Configuration
20/112
5. Define Storage type
BACKGROUND
This configuration setting enables to define the Storage Type.
Storage type indicates the type of storage to be used within awarehouse. Storage type can be
Vertical storage
Rack storage
Open storage
Storage type does not have any address like storage location;inside the storage type inventory is placed in storage bin.
Note: - Storage type with number greater than 900 series areSAP standard used for communicating with Inventory
Management.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Master Data Define StorageTypes
1. Click
8/11/2019 Mm Warehousemanagement Configuration
21/112
2. Click
3. Enter warehouse number
4. Click
8/11/2019 Mm Warehousemanagement Configuration
22/112
Press to look at more in the next page
8/11/2019 Mm Warehousemanagement Configuration
23/112
5. By default values are copied --correct
6. Double click any required row. E.g. first row here in this
case.
8/11/2019 Mm Warehousemanagement Configuration
24/112
7. Maintain the field as explained below
Field Name Field description and value
Procedure to search the suitable bin
within the storage type automatically bythe system during placing the material.Possible entries are
8/11/2019 Mm Warehousemanagement Configuration
25/112
When placing the stock in this storagetype, Transfer Order must be confirmed.
Changeability of destination bin whileconfirming the transfer order. Possibleentries are
Several quants can be stored in a bin ofthis storage type.
Quants are the lowest units in thewarehouse. For each material, batch andbin quants exists. Possible entries are
This indicates the mixing of stock (batchand material combination) in a bin ofspecific storage type. Possible entries are
8/11/2019 Mm Warehousemanagement Configuration
26/112
This indicator allows the over deliveryquantity either to be retained at thereceiving storage area or to be returnedto the source storage area.
Indicates the capacity checking methodfor storage bin in this storage type.Possible entries are
Tick in this check box activates thecapacity check. In strategies B, I and F Ithas no effect, automatically capacitycheck is performed in those strategies.
Tick in this check box activates thestorage unit type requirement in thisstorage type. It is a kind of grouping ofsimilar storage equipments like palletand basket. If auto TO is required do nottick this check box.
If it is ticked, before creating the TO,storage unit details has to be maintainedin the TR to create TO.
Tick in this check box will include thestorage section for the stock placement.
Quants and storage bin can be blocked
8/11/2019 Mm Warehousemanagement Configuration
27/112
during stock placement. Possible entriesare
To activate user exit. To have own stockplacement strategy at storage type level.
Strategy to remove the stock from thestorage bin. Possible entries are
Tick in this check box requiresmandatory confirmation of transfer
orders during stock removal.Tick in this check box will allow thenegative stock in the storage type.
If this check box is ticked , in therespective storage type bin, entire stockmust be removed irrespective of therequired quantity.
If any excess stock is removed, it can beplaced back into the same storage bin.
If this check box is ticked, zero stockcheck is performed by the system. Onceit is performed, it will be used only for
stock placement.
If this check box is ticked, it will allow toround off the picking quantities duringtransfer order. Material master record
8/11/2019 Mm Warehousemanagement Configuration
28/112
must contain the rounding off value for astorage type. It is useful with strategy M.
Control on block during stock removal.Possible entries are
Click
Click
Effect of this configuration
While performing the stock placement and stock removal atthe appropriate storage type, system will perform according tothe configurations maintained here.
8/11/2019 Mm Warehousemanagement Configuration
29/112
6. Define Storage Sections
BACKGROUND
This configuration setting enables to define the storagesections.
Storage section is the logical or physical separation of area inthe ware house.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Master Data Define StorageSections
1. Click
8/11/2019 Mm Warehousemanagement Configuration
30/112
2. Click
3. Enter warehouse number. E.g. IN6
4. Click
8/11/2019 Mm Warehousemanagement Configuration
31/112
Click
Click
Effect of this configuration
Storage section will be sued during transaction as per theconfiguration settings done here.
8/11/2019 Mm Warehousemanagement Configuration
32/112
7. Define Picking Area
BACKGROUND
This configuration setting enables to define the pickingarea. Picking area is with in the storage type defines thegroup of bins.
When creating storage bins, picking area is assigned.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Master Data Define PickingAreas
1. Click
8/11/2019 Mm Warehousemanagement Configuration
33/112
2. Click
3. Enter warehouse number
4. Click enter
5. Select any new entries. E.g. first two rows
6. Click
7. Enter as shown below
8/11/2019 Mm Warehousemanagement Configuration
34/112
8. Click
9. Click
10. Click
Effect of this configuration
Picking area defined here will be used during thetransactions.
8/11/2019 Mm Warehousemanagement Configuration
35/112
8. Define Storage Bin Types
BACKGROUND
This configuration setting enables to define the storage bintypes. Example: Storage bins can be divided based on thesized.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Master Data Storage Bins Define Storage Bin Types
1. Click
2. Click to create new keys.
3. Maintain the fields as explained below
Field Name Field description and value
- Warehouse number Key identifying the warehousenumber. E.g. IN6
Storage bin type. E.g. LR
Description of the storage bin.E.g. Large Bin
4. Click
8/11/2019 Mm Warehousemanagement Configuration
36/112
5. Click
Effect of this configuration
Suitable storage bin is proposed by the system during stockplacement.
8/11/2019 Mm Warehousemanagement Configuration
37/112
9. Define Blocking Reason
BACKGROUND
This configuration setting enables to define the blockingreason.
Blocking can be used to block during stock placement andstock removal from
Storage type Storage bin
Quant
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Master Data Storage Bins
Define Blocking Reason
1. Click
2. Click to create new keys.
3. Maintain the fields as explained below
Field name Field description and value
Key identifying the warehousenumber. E.g. IN6
Key identifying the blockingreason. E.g. E to indicateexpired stock
Description of the blockingcode entered in the blocking
8/11/2019 Mm Warehousemanagement Configuration
38/112
reason column. E.g. Expiredstock.
4. Click
5. Click
Effect of this configuration
Blocking reason defined here will be used to block duringtransaction.
8/11/2019 Mm Warehousemanagement Configuration
39/112
10. Define storage Bin Structure
BACKGROUND
This configuration setting enables to define the storage binstructure.
Storage bin structure determines the kind of numbering ofbins.
Example: -
Bin numbering can be starting from A1
Bin numbering can be starting from A-1-001
Bin numbering can be starting from 1 or 001
It is possible to define the own structure for numbering thestorage bins. When creating the storage bins, numbering
adopted as per the structure defined here.
When creating storage bin it is important to mention storagetype to which the structure is to be created.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management
Master Data
Storage Bins
Define Storage Structure
1. Click
2. Click to create new keys.
8/11/2019 Mm Warehousemanagement Configuration
40/112
3. Maintain the fields as explained below
Field name Field description and value
Key identifying the warehousenumber. E.g. IN6
Key identifying the storagetype. E.g. 100 to createstructure for productionstorage.
Number to identify thesequence. E.g. 001
Indicates how the automaticnumbering of bin is to bedone. E.g. CCCNNNCCCCC to
create numbering like P001 toP999
Starting value of binnumbering. E.g. P-001. Enteras shown below
End value of bin numbering.E.g. P-999. Enter as shown
below.
Key identifying the storagesection under the storage type100. e.g. 001
Key identifying the pickingarea.
Key identifying the storage bintype.
Maximum weight a bin canaccommodate.
8/11/2019 Mm Warehousemanagement Configuration
41/112
4. Click
5. Through menu bar in the top follow the menu pathEnvironmentCreate Bins
Storage bin will look as below
8/11/2019 Mm Warehousemanagement Configuration
42/112
6. for our understanding , let us change the structure asshown below
8/11/2019 Mm Warehousemanagement Configuration
43/112
Enter C for Alphabet and other character in thenumbering
Maintain the structure same letter under the numericindicator if the increment is to consider all the digits and
maintain the increment.
If the increment is for each digit wise, maintain thedifferent letters in the structure and maintain theincrement for each digit.
7. Repeat the step 5 Environment Create bins
8. Click to create bins online
8/11/2019 Mm Warehousemanagement Configuration
44/112
9. Click
10. Message will appear at thebottom
11. Click
12. Click
Effect of this configuration
Warehouse bin number will be created as per theconfiguration setting performed here.
8/11/2019 Mm Warehousemanagement Configuration
45/112
11. Activate Storage Type Search
BACKGROUND
This configuration setting enables to activate storage typesearch. It is essential to indicate the storage type duringstock placement and picking.
When creating the warehouse by copying, entire defaultrequired values are copied from the source warehousesetting. Let us discuss the setting for IN6 warehouse.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Strategies Activate Storage typesearch
1. Click
8/11/2019 Mm Warehousemanagement Configuration
46/112
2. Click inRow to define the storage type indicator.
3. Click
4. Enter warehouse number. E.g. IN6
5. Click
8/11/2019 Mm Warehousemanagement Configuration
47/112
6. Click (It is already defined)
7. Click
8. Click to create new keys.( only if required, bydefault when copying the warehouse, all entries will getcopied)
9. Maintain the fields as explained below
Field Name Field description and value
- Warehouse number Key identifying the warehousenumber. E.g. IN6
Key identifying the operationwhether Pick or put away.Possible entries are
- Storage type Key identifying the storagetype. It indicates the priorityfor storage type one by one.
- Stock category Key identifying the priority forstock type during picking and
8/11/2019 Mm Warehousemanagement Configuration
48/112
storing. Possible entries are
- Special stock indicator Key indicating the specialstock. Like project stock.Possible entries are
- Storage class Key identifying the storageclass. Mainly to indicate thehazardous material stockplacement and picking.
- Water pollution Key classifies hazardousmaterial with their ability topollute water. Possible entriesare
- Reference to movementtype
Reference key to trigger thesearch during put away andpicking. Through this key,different strategy for differentmovement type can beadopted.
- Storage location reference Key identifying the storagelocation reference.
- priority Enter the storage type as perthe priority.
8/11/2019 Mm Warehousemanagement Configuration
49/112
Let us maintain one more entry as shown.
10. Click
11. Click
12. Click
13. Click in row
8/11/2019 Mm Warehousemanagement Configuration
50/112
14. Maintain the reference key for movement type totrigger the search during those movements.
Note: - Reference to movement type. This will influence the
storage type search.
Note: - Maintain the entry to all other movement type aswell.
15. Click
16. Click
17. Click
18. Click
8/11/2019 Mm Warehousemanagement Configuration
51/112
19. Maintain the entries as explained below
Field Name Field description and value
- Warehouse number Key identifying the warehousenumber. E.g. IN6
- Sequence number Reference number to be usedfor searching. E.g.1 for firstsearch method with outreference to any and 2 for
second search method withreference to movement type
- consideration ofstorage type indicator.
Tick in this check boxindicates that the searchshould be based on the
storage type indicator.
1 2 3 4 5 6
1- search based on stockcategory2 search based on specialindicator3 Search based on storageclass4 Search based on pollutionclass
5 Search based on referenceto movement type6 Search based on Storagelocation reference
20. Click
21. Click
8/11/2019 Mm Warehousemanagement Configuration
52/112
Effect of this configuration
Storage type search will be performed as per the setting here.
8/11/2019 Mm Warehousemanagement Configuration
53/112
12. Activate storage section search
BACKGROUND
This configuration setting enables to activate storagesection search. It is essential to indicate the storage sectionduring stock placement and picking.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution Warehouse Management Strategies Activate StorageSection search
1. Click
2. Click
8/11/2019 Mm Warehousemanagement Configuration
54/112
3. Click
4. Click
5. Click
6. Click
7. Maintain the fields as explained below
Field Name Field description and value- Warehouse number Key identifying the warehouse
number. E.g. IN6
- Storage type Key identifying the storagetype. E.g. 001 to indicate highstorage
- Storage sectionindicator.
Key identifying the storagesection indicator. E.g. ACL
- Storage class Key identifying the storage
class. Leave it blank - water pollution
classification
Key identifying the waterpollution classification. Leaveit blank
Priority list. Enter the storagesection as per the priority.E.g. 001 storage section
8/11/2019 Mm Warehousemanagement Configuration
55/112
8. Click
9. Click
10. Click
11. Enter Section check column value as X. Otherpossible entries are
12. Click
13. Click
8/11/2019 Mm Warehousemanagement Configuration
56/112
13. Activate Storage Bin Type Search
BACKGROUND
This configuration setting enables to Activate Storage bin typesearch.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Strategies Activate Storage Bintype search
1. Click
8/11/2019 Mm Warehousemanagement Configuration
57/112
2. Click in the definitions area
Note: - If required maintain the storage bin types. In thisexample, it is already maintained.
3. Click
4. Click
5. Entries are already maintained when copying the
warehouse. Change the entries if reqired to suit the bintype. E.g. Bin type LR added as 3rd priority in IN6storage unit IP.
8/11/2019 Mm Warehousemanagement Configuration
58/112
6. Click
7. Click
Effect of this configuration
Bin search strategy will be performed as per theconfiguration done here.
8/11/2019 Mm Warehousemanagement Configuration
59/112
14. Put away and Picking Strategies
BACKGROUND
Put away and picking strategies are used to determine binsduring stock placement and stock removal.
These strategies are defined for each storage type. StandardSAP defined each storage type for each of the strategies. Inother words, according to your required strategy, one canpickup the storage type.
It is possible to define your own storage type and the strategyassociated with it.
We have discussed this strategies with the storage typecreation. We shall look at the screen shot of each strategies.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Strategies Putaway Strategies Define Strategy for fixed bins
1. Click
8/11/2019 Mm Warehousemanagement Configuration
60/112
Double click on the desired row to look at the details.
8/11/2019 Mm Warehousemanagement Configuration
61/112
Strategy for Fixed bins
8/11/2019 Mm Warehousemanagement Configuration
62/112
Define Strategy for Open storage
8/11/2019 Mm Warehousemanagement Configuration
63/112
For Block storage
8/11/2019 Mm Warehousemanagement Configuration
64/112
Lets look at the few screen shots of picking strategies.
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Strategies Picking Strategies
Define FIFO Strategy
Note: - Please refer the detailed explanation given in thestorage type are. Here the screen shots are shown for yourreference only.
1. Click
8/11/2019 Mm Warehousemanagement Configuration
65/112
Double click on the desired row to edit or display
8/11/2019 Mm Warehousemanagement Configuration
66/112
8/11/2019 Mm Warehousemanagement Configuration
67/112
Strategy for Expiration date
1. Click
2. Click in row
3. Tick the check box in column
Note: - Tick in this check box activates the Shelf LifeExpiration Date check in this warehouse. Expiration datemust be entered during stock placement.
If it is not required, do not tick the check box.
4. Click
5. Click
Effect of this configuration
Strategy for each storage type will be determined as perthe configuration done here.
8/11/2019 Mm Warehousemanagement Configuration
68/112
15. Define Movement Types
BACKGROUND
This configuration setting enables to define movement types.When copying the warehouse entire movement type settingsare copied.
Movement type contains control on
Interim storage area Storage bin where items are to be placed Type of transaction Transfer order creation Automatic TO creation Printing controls TO Confirmation
Let us discuss the standard SAP movement type setting forwarehouse IN6.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Activities Transfers DefineMovement types
1. Click
8/11/2019 Mm Warehousemanagement Configuration
69/112
2. Click
3. Enter warehouse number IN6
4. Click
8/11/2019 Mm Warehousemanagement Configuration
70/112
5. Double click row with movement type 101
8/11/2019 Mm Warehousemanagement Configuration
71/112
Field Name Field description and value
Key identifying the warehousenumber. E.g. IN6
Key identifying the movementtype. E.g. 101
Source storage type fromwhere the stock is to be
moved. E.g. 902 to indicate tobe moved from interim storagetype for GR area externalreceipts
Destination storage type towhich the stock is to beplaced. E.g. 001 to indicate
8/11/2019 Mm Warehousemanagement Configuration
72/112
high storage rack in thiswarehouse.
Storage type to keep the leftover quantity. E.g. 001
Storage bin reference for each
storage type. If storage bin ismaintained, this will be usedas a fixed bin.
Indicates the type of transfer.E.g. E to indicate stockplacement.
Requirement type indicatesthe type of transaction. E.g. Bindicates purchase order.
Tick in this check box will notallow the creation of manualTransfer Order. (TO)
Tick in this check box willallow manual creation ofTransfer Requirement.
Tick in this check box will setthe GR number and date inthe quant automatically.
In the TO system will notpropose any bin using anystrategy, user can manuallyenter the bin.
System checks for any pre-allocation of the incomingmaterial stock. If so , issuesmessage.
Tick in this check box willallow for complete quantremoval (stock removal).
Screen control for TO creation.It is possible to split thequantity during stockplacement, during stockremoval or both together.
8/11/2019 Mm Warehousemanagement Configuration
73/112
Possible entries are
Screen control for TOconfirmation. Leave it as it is.
Printing code for printing ofTO.
Automatic TO creation inbackground processing. Weshall discuss thisconfiguration below.
Confirmation of TO can be
done immediately as soon asit is created
This will propose the TOconfirmation as soon as it iscreated.
Tick in this check boxindicates that no transfer isrequired for a posting change.
6. Click
7. Click
Effect of this configuration
When performing the transaction, TR and TO will be create asper the configuration done here.
8/11/2019 Mm Warehousemanagement Configuration
74/112
16. Setup Automatic TO creation
BACKGROUND
This configuration setting enables to define automatic transferorder creation.
For every warehouse management movements TO is essential.Transfer Order can be created manually or automatically.Transfer Order indicates what is to be placed and where is itbe placed.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Activities Transfers Setupautom. TO creation for TRs/posting change notices
1. Click
8/11/2019 Mm Warehousemanagement Configuration
75/112
2. Click
3. Click
4. Maintain the fields as explained below
Field name Field description and value
- Warehouse number Key identifying the warehousenumber. E.g. IN6
- mail contact person insequence.
Sequence number to mentionmore contact persons. E.g. 1
Tick in this check boxindicates the document userhas to be sent a mail in caseof error in creating TO.
To mention any other personas a recipient in addition tothe document user.
If this check box is ticked,
message will be sent as anexpress message.
8/11/2019 Mm Warehousemanagement Configuration
76/112
5. Click
6. Click two times
7. Click
8. Click
9. Maintain the fields as explained below
Field Name Field description and value
warehouse number Key identifying the warehousenumber. E.g. IN6
Control field to trigger the TOautomatically either to TR orfor posting changes. E.g. 1
always to trigger TO for TRand posting changes.
Tick this check box toexecute TO creation forvariant 1 maintained the field
column.
Indicate who should be
8/11/2019 Mm Warehousemanagement Configuration
77/112
contacted incase of error whilecreating TO. E.g. 1 to indicatethe document user.
Description to this entry. E.g.Auto TO
10. Click
11. Click two times
12. Click
8/11/2019 Mm Warehousemanagement Configuration
78/112
Note: - the above is same as we discussed in movementtype control. Double click on the desired row and maintainthe settings as we discussed earlier.
Click , create program variant before we go to activate.
Type /nSE38 in the command box
Type program name as RLAUTA10
8/11/2019 Mm Warehousemanagement Configuration
79/112
Click
Enter variant name. E.g. IN6
8/11/2019 Mm Warehousemanagement Configuration
80/112
Click
Enter warehouse number IN6
Maintain the entries as shown below
Click
8/11/2019 Mm Warehousemanagement Configuration
81/112
Maintain the entries as shown below
Click
Message appear at the bottom
Click till the main screen is reached.
Now let us go back to activate the background job.
13. Click
8/11/2019 Mm Warehousemanagement Configuration
82/112
14. Enter job name. E.g. IND6 TO
15. Enter job class. E.g. C - Low priority
16. Click
17. click
18. enter the details as shown below
8/11/2019 Mm Warehousemanagement Configuration
83/112
19. Click
20. Click
21. Click
22. Click at the bottom
23. Click at the bottom
24. Click
25. Enter the value as per the requirement. E.g. 30minutes to run every 30 minutes.
26. Click
8/11/2019 Mm Warehousemanagement Configuration
84/112
27. Click
28. Click
29. Click
30. Click the tab screen
31. Enter the stat date and time from when this is to bescheduled.
32. Click
33. Click
34. Click
35. Click
8/11/2019 Mm Warehousemanagement Configuration
85/112
17. Define Print Control
BACKGROUND
This configuration setting enables to define print control.
Print control defines
Documents to be printed for each movement types
Form and layout to be used for printout
Printer to be used
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Activities Define Print Control
1. Click
8/11/2019 Mm Warehousemanagement Configuration
86/112
2. Click in printer area
3. maintain the fields as explained below
8/11/2019 Mm Warehousemanagement Configuration
87/112
Field Name Field description and value
- Warehouse number Key identifying the warehousenumber. E.g. IN6
- source storage type Key identifying the storagetype. *** to indicate all storage
type or enter the specificstorage type.
- Destination storagetype
Enter the destination storagetype.
Tick in this check box will notprint the TO.
Mention the printer name.
Form to be used to print TO.
Key identifying the spool
parameter. Spool parametercontrols number of copies,print immediately etc.
Spool parameter screen shot for your reference. SAPstandard setting is sufficient.
4. Click
5. Click
6. Printer can be assigned to specific to picking area andstorage type also.
7. Click the appropriate tab screen toassign the printer.
8/11/2019 Mm Warehousemanagement Configuration
88/112
8. Click in the print report row.
9. Default print report to print TO is assigned. If requiredassign your own report.
10. Click
11. Click
Effect of this configuration
Printing of transfer order will be executed as per theconfiguration done here.
8/11/2019 Mm Warehousemanagement Configuration
89/112
18. Activate Warehouse activity monitor objects
BACKGROUND
This configuration setting enables to define the warehousemonitoring object.
It is primarily to monitor the open items and uncompletedprocess in the warehouse.
Please note that only the inventory management movement
triggers the movement in the warehouse. Each IM movementwill create a TO. Each TO has to be confirmed.
In the above process it is possible to have unprocessed wmdocuments. This configuration will help to get a report of thosunprocessed items.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Planning and monitoring
Warehouse Activity Monitor Activate Warehouse activitymonitor objects
1. Click
2. Click
3. Maintain the fields as explained below
Field name Field description
- Monitoring object Select the monitoring objectfrom the possible entreis
8/11/2019 Mm Warehousemanagement Configuration
90/112
E.g. 01
- Warehouse number Enter the warehouse number.E.g. IN6
Enter display variant. E.g. 1
4. Click
Note: - Maintain the other monitor object entries asexplained above
5. Click
6. Click
Effect of this configuration
Monitoring object defined here will be used to generatereport. To schedule a periodic job to monitor the object,
this configuration setting is essential.
8/11/2019 Mm Warehousemanagement Configuration
91/112
19. Define Critical Parameters
BACKGROUND
This configuration setting enables to define the criticalparameters for monitoring object.
This configuration setting defines the period after which thereport is to be generated for the monitoring object.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Planning and monitoring
Warehouse Activity Monitor Define Critical Parameters
1. Click
2. Double click on to define critical
parameter to this.
3. Select any similar row to copy
4. Click
5. maintain entries as explained below
Field name Field description and value
- warehouse number Key identifying the warehousenumber. E.g.IN6
- movement type Enter the movement type. E.g.101
- Source storage type Enter the source storage type.E.g. 902
- Destination storage type Enter the destination storage
8/11/2019 Mm Warehousemanagement Configuration
92/112
type. E.g. 001 to indicate highrack storage
Enter the critical duration.E.g. 6
Enter the time unit of the
critical duration. E.g. Day.
6. Click
7. Click
8. Click
Maintain the critical parameter similarly as explainedabove for other monitoring objects.
Effect of this configuration
Reports will be generated based on these criticalparameters.
8/11/2019 Mm Warehousemanagement Configuration
93/112
20. Define Variant for program object overview
BACKGROUND
This configuration setting enables to define the variants forprogram object overview.
Above configuration setting we have defined the warehousemanagement monitoring objects and we have defined the
critical parameters to those monitoring objects.
To schedule a job in background and generate report, it isrequired to define to which selection parameter the report is tobe generated. Here it is defined through the selection variantfor all monitoring objects.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Planning and monitoring
Warehouse Activity Monitor Report Variants DefineVariant for program object overview
1. Click
8/11/2019 Mm Warehousemanagement Configuration
94/112
2. Enter IN6 as variant name
3. Click
4. Maintain the entries as shown below
8/11/2019 Mm Warehousemanagement Configuration
95/112
5. Click
6. Enter description to this layout
7. Click
8. Click
8/11/2019 Mm Warehousemanagement Configuration
96/112
Effect of this configuration
Reports will be generated based on these selection variant.
8/11/2019 Mm Warehousemanagement Configuration
97/112
21. Define variants for selection programs
BACKGROUND
This configuration setting enables to define the variants forprogram object overview.
Above configuration setting we have defined the warehousemanagement monitoring objects and we have defined thecritical parameters to those monitoring objects.
To schedule a job in background and generate report, it isrequired to define to which selection parameter the report is tobe generated. Here it is defined through the selection variantfor all monitoring objects.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Planning and monitoring Warehouse Activity Monitor Report Variants DefineVariant for selection programs
1. Click
8/11/2019 Mm Warehousemanagement Configuration
98/112
Note: - For each monitoring object, there is a reportprogram. Selection parameter can be defined for each.
To create a variant double click on the desire row andcreate variant as explained in the previous heading.
We have
Defined the warehouse monitoring objects Defined the parameter for each monitoring object
Defined the selection parameter for each monitoringobject to generate reports
Now it is possible to run the report periodically throughthe background job processing using the below setting.
Define jobs for selecting critical objects
We have discussed this in the previous topics hence it isnot repeated here.
8/11/2019 Mm Warehousemanagement Configuration
99/112
22. Define Movement Types
BACKGROUND
This configuration setting enables to define the movementtypes to relate the movement between IM and WM.
Warehouse specific TO create controls are defined in thissettings.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Interfaces Inventory
Management Define Movement types
1. Click
2. Double click
8/11/2019 Mm Warehousemanagement Configuration
100/112
Note: -Using the reference movement type, you can group togetherInventory Management movement types that result in the
same movement in the WM system.
Note: - Inventory Management movement types that do notinitiate any activity in the Warehouse Management Systemhave the reference movement type 999. Leave this setting as itis.
8/11/2019 Mm Warehousemanagement Configuration
101/112
3. Click
4. Double click
5. Select the rows with *** to copy into IN6 warehouse
6. Click
7. Change the warehouse name to IN6
8. Maintain the fields as explained below
Field Name Field description and value
- warehousenumber
Warehouse Number. E.g. IN6
Reference movement type. Using thereference movement type, you cangroup together Inventory Management
8/11/2019 Mm Warehousemanagement Configuration
102/112
movement types that result in the samemovement in the WM system.Note: - Inventory Managementmovement types that do not initiate anyactivity in the Warehouse Management
System have the reference movementtype 999.
- Special stockindicator
Key identifying the special indicator.Leave it as it is
- movementindicator
Key identifying the movement indicator.Leave it as it is.
- Special stockindicator
Key identifying the special stockindicator. Leave it as it is.
- Special
movement indicator
Key identifying the special movement
indicator. This is used to group thematerial for similar movement typesbehaviour.
-Storage locationreference
Storage location reference used forsearching. Leave it as it is.
- movement typefor warehousemanagement
Key identifying the warehousemanagement movement.Note: - The movement type influencesthe creation of the transfer order in
manyways (for example, printing, definingthe interim storage area confirmation,and so on).
- TR createtransferrequirements
Key identifying the creation of transferrequirement.Possible entries are
- Creation ofposting changenotices
Tick in this check box will createposting change notices. Note: - whenyou create TR, leave this blank. Youcan tick this if you do not create TR.
- IN->WM Key to trigger TO creation in WM.
8/11/2019 Mm Warehousemanagement Configuration
103/112
initiate immediateTO creation
Possible entries are
- mail control Contact person incase of error duringTO creation. Enter as per your mailconfiguration.
- Goods receiptdate
GR date determination. Used for FIFOmaterials. Possible entries are
- Additionaldialog box
Used to have additional dialog boxduring posting. Used in Palletization.Possible entries are
Below screen shows the setting for 311 movement
8/11/2019 Mm Warehousemanagement Configuration
104/112
Below screen shows the setting for 309
Below screen shows the setting for 201
9. Maintain the entries as explained above to all themovement types in warehouse IN6.
10. Click
23. Define Posting Changes
BACKGROUND
8/11/2019 Mm Warehousemanagement Configuration
105/112
This configuration setting enables to define the postingchanges for quants.
Posting changes that can be performed in a warehouse is
defined here. Example moving stock form Quality tounrestricted or vice versa. Moving stock from unrestricted toblocked or vice versa.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Interfaces Inventory
Management Define Posting Changes
1. Click
2. Click
3. Maintain the entries as explained below
Field Name Field description and value
- warehouse number Key identifying the warehousenumber. E.g. IN6
- movement type Enter the movement type. E.g.321 to indicate stock transferfrom QI to UR stock
- movement type Enter the inventorymanagement movement type.E.g. 321
- Stock category Enter the source stock
category. E.g. Q to indicateQuality stock
Enter destination stockcategory.
Enter the mail control. E.g.1to send mail to the documentcreator.
8/11/2019 Mm Warehousemanagement Configuration
106/112
4. Click
5. Click
Effect of this configuration
This configuration setting enables to perform the postingchange in the warehouse.
8/11/2019 Mm Warehousemanagement Configuration
107/112
24. Generate Interim Storage bins
BACKGROUND
This configuration setting enables to define and generate theinterim storage bins for a given warehouse.
Interim storage bins are mandatory to keep the stock in theintermediate area when triggered by an IM movement.
When receiving a material from vendor, first it will be posted to
an interim area of GR receipt area. While posting to this area,system requires bin number.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution
Warehouse Management Interfaces Inventory
Management Generate Interim Storage bins
1. Click
2. Enter warehouse number. E.g. IN6
3. Click
8/11/2019 Mm Warehousemanagement Configuration
108/112
4. Click
5. Message will appear at the bottom
Effect of this configuration
While placing the materials in interim storage type, binnumber as per this configuration will be used.
8/11/2019 Mm Warehousemanagement Configuration
109/112
25. Allow negative stocks in interim storage types
BACKGROUND
This configuration setting enables to control negative stockcreation in the storage type and the warehouse related systemmessages.
INSTRUCTIONS
Follow the Menu Path: IMG Logistics Execution Warehouse Management Interfaces Inventory
Management Activate negative stock in interim storagetypes
1. Click
2. Double click
8/11/2019 Mm Warehousemanagement Configuration
110/112
3. Set the message category for Available stock shortfallmessage text as per the business requirement
Possible entries are
4. Click
5. Click
6. Double click
8/11/2019 Mm Warehousemanagement Configuration
111/112
7. Tick the check box in the column to allow
the negative stock
8. Click
9. Click
Effect of this configuration
Negative will be allowed at the storage type level as per theconfiguration setting performed here.
To learn about more of our best-selling SAP packs visit us atwww.sap-topjobs.com
8/11/2019 Mm Warehousemanagement Configuration
112/112
top related