Transcript
www.themegallery.com
WESTERN VISAYAS COLLEGE OF SCIENCE AND TECHNOLOGY COLLEGE OF ENGINEERING AND ARCHITECTURE
SHIP AND CREWSHIP AND CREW
MARITIME ENGLISH
MARINE ENGINEERING DEPARTMENT
www.themegallery.com
CONTENTS
General Information of Ships
Vessel Types and Parts
Movements of Ships & Degree of Freedom
Crew Rules and Routines
Engine Watchkeeping
www.themegallery.com
GENERAL INFORMATION OF SHIPSGENERAL INFORMATION OF SHIPS
www.themegallery.com
GENERAL INFORMATION OF SHIPS
DESCRIPTION OF SHIP AND PARTS
www.themegallery.com
GENERAL INFORMATION OF SHIPSShips or Vessel -–The name given to any craft which float and is able to navigate.
Stem - Refers to the curved plate which is the first part of the ship to cut through the water ahead of the shipStern or Poop Deck - The rear end of the ship and it’s designed so that the layers of the water surrounding the hull do not form eddies but act efficiently on the propeller and the rudder.Starboard Side –- The name given to the right-hand side of the ship.Port Side –- The name given to the left-hand of the ship.Keel - The Backbone and the lowest part of the ship. This runs from the stem to stern.Frames -– The steel ribs which run at he right angles (transversely) to the keel as far as the curve of the bilge of the hull and to which the plating on the both sides is connected.Hatches - are openings in the deck giving access to holds or space below.Anchor - is used to secure the ship in a stationary position to the sea bed.Bollards - are vertical posts used for securing hawser; mooring ropes etc. They can also be called “bitts”.Lifebuoy - is a specially designed float used for throwing overboard to keep a person afloat in the water until rescued.
www.themegallery.com
VESSEL TYPES AND PARTSVESSEL TYPES AND PARTS
www.themegallery.com
VESSEL TYPES AND PARTS
MERCHANT
SHIPS
MERCHANT
SHIPS
Bulk Carrier – is a merchant ship specially designed to transport unpacked bulk cargo, such as grains, coal, ore and cement in its cargo holds.
www.themegallery.com
VESSEL TYPES AND PARTS
MERCHANT
SHIPS
MERCHANT
SHIPS
Container Ship – carry their entire load in truck-size containers in a technique called containerization. They form a common means of commercial intermodal freight transport.
www.themegallery.com
VESSEL TYPES AND PARTS
MERCHANT
SHIPS
MERCHANT
SHIPS
Oil Tanker – also known as petroleum tankers are ships designed for the bulk transport of oil. There are two basic types of oil tanker: The crude tanker and the product tanker.
www.themegallery.com
VESSEL TYPES AND PARTS
MERCHANT
SHIPS
MERCHANT
SHIPS
Chemical Tanker – is a type of tanker designed to transport chemicals in bulk. Ocean-going chemical tankers generally range from 5,000 metric tons deadweight (DWT) to 40,000 DWT in size.
www.themegallery.com
VESSEL TYPES AND PARTS
MERCHANT
SHIP
MERCHANT
SHIP
Reefer Ship – refrigerated ships designed to carry frozen or chilled cargo such as fruits, dairy products, meat, fish and poultry
www.themegallery.com
VESSEL TYPES AND PARTS
MERCHANT
SHIPS
MERCHANT
SHIPS
RoRo Ships – stands for (Roll-on/Roll-off) designed to transport vehicles via a ramp situated either at the stern or at the side of the ship.
www.themegallery.com
VESSEL TYPES AND PARTS
MERCHANT
SHIPS
MERCHANT
SHIPS
Coaster (Coastal Trading Vessel) – are shallow-hulled ships used for trade between locations on the same island or continent.
www.themegallery.com
VESSEL TYPES AND PARTS
MERCHANT
SHIPS
MERCHANT
SHIPS
Heavy Lift Ship – are vessel designed to move loads that cannot be handled by normally equipped ships.
www.themegallery.com
VESSEL TYPES AND PARTS
MERCHANT
SHIPS
MERCHANT
SHIPS
General Cargo Ships – ship or vessel that carries cargo, goods, and materials from one port to another.
www.themegallery.com
VESSEL TYPES AND PARTS
PASSENGER
SHIPS
PASSENGER
SHIPS
Cruise – is a passenger ship used for pleasure voyages, where the voyages itself and the ship’s amenities are part of the experience.
www.themegallery.com
VESSEL TYPES AND PARTS
PASSENGER
SHIPS
PASSENGER
SHIPS
Ferry – is a form of transport, usually a boat or ship, but also other forms, carrying passenger and often their cars. Ferries are also used to transport freight and even railroad cars.
www.themegallery.com
VESSEL TYPES AND PARTS
PASSENGER
SHIPS
PASSENGER
SHIPS
Cruise Ferry – is a ship that combines the features of a cruise ship with Ro-Ro Pax ferry. Many passenger travel with the ships for the cruise experience, staying only few hours at the destination port or not leaving the ship at all while others use the ships as means of transportation.
www.themegallery.com
VESSEL TYPES AND PARTS
PASSENGER
SHIPS
PASSENGER
SHIPS
Yachts – used by private individual or companies for leisure time; these yachts have a length of 10 to 20 metres
www.themegallery.com
VESSEL TYPES AND PARTS
SERVICE
SHIPS
SERVICE
SHIPS
Tugboat – is a boat used to maneuver, primarily by towing or pushing other vessel in harbours over the open sea or through rivers and canals. Tugboats are also used to tow barges, disabled ships, or other equipment like towboats.
www.themegallery.com
VESSEL TYPES AND PARTS
SERVICE
SHIPS
SERVICE
SHIPS
Supply ship – is a ship specially designed to supply naval warships like aircraftcarrier, and offshore oil platforms. These ships range from 65 to 350 feet in length and accomplish a variety of task.
www.themegallery.com
VESSEL TYPES AND PARTS
SERVICE
SHIPS
SERVICE
SHIPS
Cable Ship – is a deep-sea vessel designed and used to lay underwater cables for telecommunications, electricity, and such a large superstructure.
www.themegallery.com
VESSEL TYPES AND PARTS
SERVICE
SHIPS
SERVICE
SHIPS
Crane Vessel – is a ship that is specialized in lifting heavy loads and used for offshore construction.
www.themegallery.com
VESSEL TYPES AND PARTS
NAVAL
SHIPS
NAVAL
SHIPS
Air Craft Carrier – vessel suitable for aircraft and helicopters to land on and to take off. Aircraft Carrier has a propulsion of two nuclear reactors driven four turbines producing a 260,000 HP at speed of 30 knots and has a crew of 5, 680.
www.themegallery.com
VESSEL TYPES AND PARTS
NAVAL
SHIPS
NAVAL
SHIPS
Destroyer – is a smaller than a cruiser but is also fitted to operate independently. These are multi-functional warships designed to fight submarines and surface vessel and to escort convoys.
www.themegallery.com
VESSEL TYPES AND PARTS
NAVAL
SHIPS
NAVAL
SHIPS
Corvettes – have a displacement of 700 to 2000 tons and are well armed. They are best equipped to act in regional operations and are seldom used for long-range operations.
www.themegallery.com
VESSEL TYPES AND PARTS
NAVAL
SHIPS
NAVAL
SHIPS
Frigates – are very versatile warships. They are suitable for air defence, anti-submarine warfare and surface warfare. They have a wide array of sensors, communication devices and large numbers of sonar’s. There are several different weapons systems onboard which are controlled from the command room attack target fully automatically.
www.themegallery.com
VESSEL TYPES AND PARTS
NAVAL
SHIPS
NAVAL
SHIPS
Submarine – are very hard to detect and therefore very popular in the navies worldwide. These vessel are part of the strategic nuclear deterrence force of the superpowers. They can stay below the surface for moths if necessary.
www.themegallery.com
VESSEL TYPES AND PARTS
NAVAL
SHIPS
NAVAL
SHIPS
Cruisers – have a displacement of more than 10,000 tons and are sufficiently armed to operate on their own. Task are surveillance, blocking, protection of Convoys and supporting large fleets.
www.themegallery.com
MOVEMENTS OF SHIPSAND
DEGREE OF FREEDOM
MOVEMENTS OF SHIPSAND
DEGREE OF FREEDOM
www.themegallery.com
MOVEMENTS OF SHIPS AND DEGREE OF FREEDOM
www.themegallery.com
MOVEMENTS OF SHIPS AND DEGREE OF FREEDOM
Heave – Gently rising and falling in regular alterationPitch – Wobble up and down. To move in an alternate fore and aft motion (longitudinally). Effect of waves head on.Surge – A powerful rising and falling or Forward rushing movements, like that of the sea. Waves come from the stern.Sway – The act o swinging back and forthYaw – Turn around the vertical axis. Todeviate a straight course.Roll – Partial rotation of the body on either side,cause by motion of the wave’s broadside
www.themegallery.com
CREW RULES AND ROUTINESCREW RULES AND ROUTINES
www.themegallery.com
CREW RULES AND ROUTINES
ENGINE ROOM DEPARTMENT
Chief Engineer - is responsible for the efficient operation of ship's engines. Chief engineer prepares various reports, supervises any repair and approves theordering of spares and equipment.
Second Engineer - is responsible for the maintenance of the main engine, the safety and cleanliness of the engine-room, the ordering of stores and equipment through the chief engineer, the repair and maintenance of any mechanical equipment on deck. Third Engineer - is the watchkeeping engineer responsible for the condition and maintenance.
Fourth engineer - is responsible for the taking of bunker, the purification of the fuel and the maintenance of the purifier. He supplies the chief engineer with fuel consumption figures daily.
Engineering cadet - is also a student from a maritime school to become an engineer.
www.themegallery.com
CREW RULES AND ROUTINES
ENGINE ROOM DEPARTMENT
ENGINE CREW
Electrician - is responsible for the maintenance and repair of all electrical and electronic equipment.
Fitter - does some mechanical repairs and welding.
Oiler – an engine rating forming part of the engine watchkeeping. Assist the duty watchkeeping engineer in the safe operation of engine machineries.
Wiper - cleans machinery spaces.
www.themegallery.com
ENGINE WATCHKEEPINGENGINE WATCHKEEPING
www.themegallery.com
ENGINE WATCHKEEPING
www.themegallery.com
top related