Transcript
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
2 info@chrom4.com :: www.chrom4.com
IntroductionAt Chrom4 we are known for our world class products.
Our Sample Handling line is one of the most extensivelines available in the chromatography industry.
We have top notch quality suppliers for vials, caps and inserts as well asPorvairʼsandRitterʼsexcellentlines of 96-well plates and mats.
Our vials are produced under the most stringentconditions with highly sophisticated productiontechnology out of 1st hydrolytic class glass.Only Schott glass is used as raw material, which results in an outstanding product.
Quality control and inspection Opto-electronic (photocamera)devices on the glass machines measure within fractions of a second, whether the vial meets our specifications. A second photo camera inspection checks for cosmetic errors (cracks,chips)intheglass.
Length gauging equip-ment measures dimensional specifications inaddition to the camera inspection.
When a vial is not according to specification, it automatically goes to waste.The vials are packed in a cleanroom, therefore avoiding any chance of contamination.
A manual random inspection and a final inspection to ISO and other quality standards assure you of a great, problem free and reliable product.
We only supply caps from the main manufacturers, who supply 90% of the industry and we consider this the standard.
Our cap manufacturers also use photo camera inspection.
We carry a wide variety of caps enabling you to choose what is right for your applications.
We believe we supply the highest quality product available in our industry.
Constant improvement on existing products, such as quality, packaging, etc. are part of our policy to service you better.This will provide you high quality products with a price/performance ratio enabling better control of your consumables budget.We showcase a large number of new products to make your sample handling in the lab more efficient.
Our other sample handling products, such as inserts, high recovery vials, 96-well plates and mats havethe same stringent quality procedures duringmanufacturing.We are proud to serve you. If you would like to receive samples of our sample handling products, please contact us.
We have highlighted our most popular items for your convenience.
Septum Material Compatible with Resealability Max Temp
Rubber(Natural or Butyl)
ACN, acetone, DMF, alcohols, diethy-lamine, DMSO, phenols
Excellent <100°C
PTFE/Natural or Butyl Rubber
PTFE resistance until punctured, then septa or liner will have compatibility of rubber
Good <100°C
Silicone/Silicone Rubber
Alcohol, acetone, ether, DMF, DMSO Excellent <200°C
PTFE/Silicone, PTFE/Silicone/PTFE
PTFE resistance until punctured, then septa or liner will have compatibility of silicone
Average <200°C
VITONChlorinated solvents, benzene, toluene, alcohols, hexane, heptane
Good <260°C
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 3
Agilent™ Compatible
PART NO. (100pk) DESCRIPTIONSmall OpeningVT011-1232 2mL Clear Glass Vial -Large OpeningVT011L-1232 2mL Clear Glass Crimp Vial 5183-4491/5181-3375VT011LM-1232 2mL Clear Glass Crimp Vial w/marking spot 5183-4492/5182-0543VT11LM-1232A 2mL Amber Glass Crimp Vial w/marking spot 5181-3376/5183-4493
• Our glass products are borosilicate USP class 1• Strain point : 565°C• Please note that some manufacturers refer to
2mL vials as 1.5mL or 1.8mL
Our recommended vials, caps and inserts are specifically designed and made for Agilent™ compatible autosamplers.In general, Agilent™ autosamplers use a 9mm thread screw vial (sometimescalledROBOorDPvial).
These vials require a 9-425 screw cap, available in various colours for colour-coding of yoursamples(seepages5-6).For Biopharma applications, we recommend a PTFE/Silicone liner.Most of Agilent™ GC and some LC applications use 11mm crimp vials with an 11mm aluminum crimp cap available in 5 colours (see page4).Some chemists prefer a snap vial, which requires a 11mm snap cap. For snap vials and caps see page 7-8.For 8mm crimp vials and Headspace vials, please refer to page 9 and page 25 respectively.
Agilent™ Autosampler Products
Ordering Information - 2mL Crimp Vials, 12 x 32mm, 11mm Opening
Ordering Information - Inserts
Crimp Vials, Caps and Inserts
PART NO. (100pk) DESCRIPTIONI005BS-625 50µL Glass LV Insert with Bottom Spring* -I025BS-629 250µL Glass Conical Insert with Bottom Spring 5181-1270I025PBS-629 250µL Polypropylene Insert with Bottom Spring -I025-531 250µL Glass Flat Bottom Insert for 2mL small opening Crimp Vials -I025-630 350µL Glass Flat Bottom Insert for 2mL LO Crimp Vials 5181-3377I025GF-631 250µL Glass BM Hanging Conical Point Insert -I025CP-631 250µL Conical Point Glass Insert, 6 x 31mm for 2mL LO Crimp Vials 5183-2085
Small Opening Large Opening
VT011-1232
VT011L-1232
VT011LM-1232
VT011LM-1232A
I025PBS-629
I025BS-625
I025-630 I025-531 I025GF-631
I025CP-631
I025BS-629
*Please note that 50µL glass inserts actually hold a larger volume
See page 22 for our QC certified vials. The best verification in the industry.
Agilent™ Compatible Part
Agilent™ Compatible Part
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
4 info@chrom4.com :: www.chrom4.com
Agilent™ Compatible
Ordering Information - 11mm Aluminum Crimp Caps with Septa
Crimpers & Decappers see page 24
PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part
C142-11 11mm Silver Crimp Cap, PTFE/Butyl Rubber 5183-4498
C141-11B 11mm Blue Crimp Cap, PTFE/Synthetic 5181-1215C141-11G 11mm Green Crimp Cap, PTFE/Synthetic 5181-1216C141-11Go 11mm Gold Crimp Cap, PTFE/Synthetic -
C141-11R 11mm Red Crimp Cap, PTFE/Synthetic 5181-1217C150-11 11mm Silver Crimp Cap, PTFE/Silicone 5183-4500/5182-0552C160-11 11mm Silver Crimp Cap, PTFE/Silicone/PTFE 5183-4499/5181-1211C170-11 11mm Magnetic Crimp Cap, PTFE/Silicone -
C190-11 11mm Silver Crimp Cap, Red PTFE/White Silicone with Slit -
C141-11GOC190-11
C141-11G
C141-11B C142-11
C150-11 C170-11
C141-11R
C160-11
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 5
Agilent™ Compatible
Ordering Information - 2mL Screw Vials, 12 x 32mm, 9mm thread
Screw Vials, Caps and Inserts for Agilent™ robotic arm 1090, 1100, 1200
*Please note that 50µL glass inserts actually hold a larger volume
PART NO. (100pk) DESCRIPTIONVT009-1232 2mL Clear Glass Screw Vial 5182-0714/5183-2067
VT009M-1232 2mL Clear Glass Screw Vial with Marking Spot 5182-0715/5183-2068
VT009M-1232A 2mL Amber Glass Screw Vial with Marking Spot 5182-0716/5183-2069
VT009M-1232S 2mL Clear Glass Screw Vial with Marking Spot, Silanized 5183-2071
V0309P-1232V0159P-1232
300µL PP Short Thread Micro Vial, 12 x 32mm 2mL PP Short Thread Screw Vial with graduated volume, 12 x 32mm
-
-
PART NO. (100pk) DESCRIPTIONI005BS-625 50µL Glass LV Insert with Bottom Spring* -
I025BS-629 250µL Glass Conical Insert with Bottom Spring 5181-1270I025BS-629S 250µL Glass Conical Insert with Bottom Spring, Silanized 5181-8872I025PBS-629 250µL Polypropylene Insert with Bottom Spring -I025-630 350µL Glass Flat Bottom Insert 5181-3377I025GF-631 250µL Glass BM Hanging Conical Point Insert -I025CP-631 250µL Conical Point Glass Insert, 6 x 31mm for 2mL WM Crimp Vials 5183-2085
Ordering Information - Inserts
VT009-1232V0159P-1232
VT009M-1232
VT009M-1232A
I025CP-631I025PBS-629
I025BS-629
I025-630
Agilent™ Compatible Part
Agilent™ Compatible Part
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
6 info@chrom4.com :: www.chrom4.com
Agilent™ Compatible
Ordering Information - 9mm Screw Caps with Septa*
C39E-09B
C394E-09XG
C394E-09R
C395E-09XY
C395E-09R
C395E-09G
C395E-09B
C396-09SB
C397E-09B
Combi-Kits available. See pages 23.
*Slitted cap recommended for UHPLC
Ask us for our convenient & transparent Combi-Kit.
Combi-Kits consist of 100 vials and 100 matching caps.
PART NO. (100pk) DESCRIPTIONC394E-09B 9mm Ribbed Blue Screw Cap, FEP/ButylRubber 5182-0717C394E-09G 9mm Ribbed Green Screw Cap, FEP/ButylRubber 5182-0718C394E-09R 9mm Ribbed Red Screw Cap, FEP/ButylRubber 5182-0719
9mm Ribbed Blue Screw Cap, PTFE/Silicone
9mm Smooth Blue Screw Cap, PTFE/Silicone
5182-0720
5182-0720
C395E-09G
C395E-09SG
9mm Ribbed Green Screw Cap, Red PTFE/White Silicone
9mm Smooth Green Screw Cap, Red PTFE/White Silicone
5182-0721
5182-0721
C395E-09R 9mm Ribbed Red Screw Cap, Red PTFE/White Silicone 5182-0722C395E-09Y 9mm Ribbed Yellow Screw Cap, Red PTFE/White Silicone -C395EB-09SBL 9mm Ribbed Black Screw Cap, Blue PTFE/White Silicone -
C396-09SB 9mm Smooth Blue Screw Cap, PTFE/Silicone/PTFE 5182-0723C396-09SG 9mm Smooth Green Screw Cap, PTFE/Silicone/PTFE 5182-0724C396-09SR 9mm Smooth Red Screw Cap, PTFE/Silicone/PTFE 5182-0725C396-09SY 9mm Smooth Yellow Screw Cap, PTFE/Silicone/PTFE -C397E-09B 9mm Ribbed Blue Screw Cap, Red PTFE/White Silicone with Slit* 5183-2076C397E-09R 9mm Ribbed Red Screw Cap, Red PTFE/White Siliconee with Slit* 5183-2078C397E-09G 9mm Ribbed Green Screw Cap, Red PTFE/White Silicone with Slit* 5183-2077C397E-09Y 9mm Ribbed Yellow Screw Cap, Red PTFE/White Silicone with Slit* -
C397E-09SB 9mm Smooth Blue Screw Cap, Red PTFE/White Silicone with Slit* 5183-2076C397E-09SR 9mm Smooth Red Screw Cap, Red PTFE/White Silicone with Slit* 5183-2078
C395E-09B
C395E-09SB
Agilent™ Compatible Part
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 7
Agilent™ Compatible
Ordering Information - 2mL Snap Vials, 12 x 32mm, 11mm Opening
Snap Vials, Caps and Inserts
No matter what chromatography vial, cap or insert you are looking forChrom4 carries it!
* Please note that 50µL glass inserts actually hold a larger volume
PART NO. (100pk) DESCRIPTION2mL Clear Glass Snap Vial with Marking Spot 5182-2068/5182-0546
VT11SM-1232A 2mL Amber Glass Snap Vial with Marking Spot 5181-0545/5181-2069
V0111P-1232 100µL LVV Crimp/Snap Ring Vial, 11mm thread 9301-0977V0300P-1232 300µL Conical, Ultraclean Polypropylene, Snap/Crimp Top 5183-2087V0711P-1232 750µL Conical LVV Vial, Polypropylene, Snap/Crimp Top 5183-4731
PART NO. (100pk) DESCRIPTIONI005BS-625 50µL Glass LV Insert with Bottom Spring* -
I025BS-629 250µL Glass Conical Insert with Bottom Spring 5181-1270I025BS-629S 250µL Glass Conical Insert with Bottom Spring, Silanized 5181-8872I025PBS-629 250µL Polypropylene Insert with Bottom Spring -I025-630 350µL Glass Flat Bottom Insert 5181-3377I025GF-631 250µL Glass BM Hanging Conical Point Insert -
Ordering Information - Inserts
V0300P-1232
VT011SM-1232
VT11SM-1232A
I025PBS-629
I025BS-629
I025-630
VT011SM-1232
Agilent™ Compatible Part
Agilent™ Compatible Part
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
8 info@chrom4.com :: www.chrom4.com
Agilent™ Compatible
Ordering Information - 11mm Snap Caps with Septa
PART NO. (100pk) DESCRIPTION
C240-11 11mm Natural Snap Cap with PTFE/Butyl Rubber 5182-0550
11mm Blue Snap Cap with Red PTFE/White Silicone C250CS-11 11mm Natural Snap Cap with PTFE/Silicone C250PBS-11 11mm Blue Snap Cap with Clear PTFE/Blue Silicone -
C260S-11 11mm Blue Snap Cap with Red PTFE/White Silicone/Red PTFE
C270BS-11 11mm Blue Snap Cap with Red PTFE/White Silicone Slitted -C270CS-11 11mm Clear Snap Cap with Red PTFE/White Silicone Slitted -C270CBS-11 11mm Clear Snap Cap with Blue PTFE/White Silicone Slitted -C270CBS-11X 11mm Clear Snap Cap with Blue PTFE/White Silicone with Cross Slit -
C299-11 11mm Natural Snap Cap with 6mills Foil -
C240-11
C240-11BL C250-11
C250-BS11
C260-11
C250-BS11N/A
C270CS-11
N/A
N/A
Looking for headspace vials for your Agilent™ autosampler? See page 25 for headspace vials and caps.
C250BS-11
* Note: For analytes where PTFE interferes with the sample, such as PFOS, PFOA etc., used in combination with V0300P-1232
5182-05415182-3458
5182-0560
V06020-2338X
VX0020-2346X
VXX020-2375XP
CLS-0030
CLS-9508
CLS-9980
Agilent™ Compatible Part
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 9
Agilent™ Compatible
Ordering Information - MicrovialsMicrovials and Caps
PART NO. (100pk) DESCRIPTION
V0308-632 300µL Clear Round Bottom Glass Crimp Vial, 8mm -
V1111-1232 1.1mL Clear Tapered Bottom Glass Crimp Vial, 11mm -
V1108-1232 1.1mL Clear Tapered Bottom Glass Screw Vial, 8-425 -
V01511-1232 1.5mL Clear Glass Crimp V-Vial, 12 x 32mm, 11mm 5184-3551V01511-1232A 1.5mL Amber Glass Crimp V-Vial, 12 x 32mm, 11mm 5184-3555V01511S-1232 1.5mL Clear Glass Snap/Crimp V-Vial, 12 x 32mm, 11mm 5184-3552V01511S-1232A 1.5mL Amber Glass Snap/Crimp V-Vial, 12 x 32mm, 11mm 5184-3556V01508-1232 1.5mL Clear Glass Screw V-Vial, 12 x 32mm, 8mm -V01508-1232A 1.5mL Amber Glass Screw V-Vial, 12 x 32mm, 8mm -V01509-1232 1.5mL Clear Glass Screw V-Vial, 12 x 32mm, 9mm 5184-3550V01509-1232A 1.5mL Amber Glass Screw V-Vial, 12 x 32mm, 9mm 5184-3554VB311C-1232 2mL Clear Crimp Vial, Fused in 300µL insert 9301-1388V0708-840 700µL Clear Flat Bottom Crimp Vial, 8mm -V0708-840A 700µL Amber Tapered Bottom Crimp Vial, 8mm -
V01511-1232A
V01511S-1232
V01511S-1232A
V01509-1232A
For 9mm screw caps refer to page 6. For 11mm crimp caps refer to page 4.
Ordering Information - 8mm Crimp Caps with SeptaPART NO. (100pk) DESCRIPTION
C141-08 8mm Silver Crimp Cap, PTFE/ Natural Rubber -C150P-08EZ 8mm Silver Crimp Cap, Red PTFE/White Silicone -
C190P-08 8mm Silver Crimp Cap, Red PTFE/White Silicone with Slit -
V0308-632 V0708-840A
V1111-1232V1108-1232
VB311MC-1232
C141-08 C150P-08E2 C180-08
VB311M-1232
V01509-1232
V01511-1232
Agilent™ Compatible Part
Agilent™ Compatible Part
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
10 info@chrom4.com :: www.chrom4.com
Beckman/Hitachi
• Our glass products are borosilicate USP class 1• Strain point : 565° C• Please note that some manufacturers refer to
2mL vials as 1.5mL or 1.8mL
Our recommended vials, caps and inserts are specifically designed and made for Spark(Holland) autosamplers, which Beckman (as well as Bruker) is outfitted with.
Beckman autosamplers use a 8mm thread screw vial.These vials require a 8-425 screw cap, available in various colours for colour-coding of your samples. For Biopharma applications, we recommend a PTFE/Silicone liner. Most chemists prefer 10mm Bruker autosampler vials (see page 11). Wide mouth vials (VT010M-1232) and caps w/PTFE septa (C06050BC-10). Also available in a clamshell.
Ordering Information - 2mL Screw Vials, 12 x 32mm, 8mm Opening
Screw Vials, Caps and Inserts
Beckman Autosampler Products
PART NO. (100pk) DESCRIPTIONVT008M-1232 2mL Clear Glass Screw Vial with Marking SpotVT008M-1232A 2mL Amber Glass Screw Vial with Marking Spot
PART NO. (100pk) DESCRIPTIONI01-531 100µL Glass LV Insert, Conical Point, No SpringI01BS-530 100µL Glass LV Insert, Conical Precision Point, Plastic Bottom SpringI025-531 250µL Glass Flat Bottom Insert
Ordering Information - Inserts
VT008M-1232
VT008M-1232A
Ordering Information - 8mm Screw Caps with SeptaPART NO. (100pk) DESCRIPTIONCLS39939 8mm Open Hole Black PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08R 8mm Open Hole Red PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08Y 8mm Open Hole Yellow PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08W 8mm Open Hole White PP Screw Cap, 8-425 Red PTFE/Silicone
I01-531
I01BS-530
I025-531
C9SF-08Y
CLS39939
Compatible
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 11
TechComp (Formerly Bruker/Varian)
Ordering Information - 10mm Screw Caps w/Septa
Ordering Information - 2mL Screw Vials, 12 x 32mm, 10mm OpeningScrew Vials, Caps and Inserts
• Our glass products are borosilicate USP class 1 • Strain point : 535° C• Please note that some manufacturers refer to
2mL vials as 1.5mL or 1.8mL
Our recommended vials, caps and inserts are specifically designed and made for Marathon Spark(Holland) autosamplers, which TechComp LCʼs are outfitted with.TechComp autosamplers use a 8mm thread screw vial as well as the more convenient 10mm thread screw vials (sometimes called ABC or Wide Mouth vial).
Most chemists prefer 10mm wide mouth vials (VT010M-1232) and caps w/PTFE septa (C06050BC-10).Also available in a clamshell.For Biopharma applications, we recommend a PTFE/Silicone liner.
TechComp Autosampler Products
* Please note that 50µL glass inserts actually hold a larger volume
PART NO. (100pk) DESCRIPTIONVT010M-1232 2mL Clear Big Mouth Glass Screw Vial with Marking SpotVT010M-1232A 2mL Amber Big Mouth Glass Screw Vial with Marking Spot
PART NO. (100pk) DESCRIPTION
C06050-10 10mm Black Open-Hole Screw Cap, Tan PTFE/Silicone 60mil
PART NO. (100pk) DESCRIPTIONI005BS-625 50µL Glass LV Insert with Bottom Spring*I025BS-629 250µL Glass Conical Insert with Bottom SpringI025-630 350µL Glass Flat Bottom InsertI025GF-631 250µL Glass BM Hanging Conical Point InsertI025PBS-629 250µL Polypropylene Insert with Bottom Spring
Ordering Information - Inserts
C06050-10S
C06050-10
For insert images refer to page 7
VT010M-1232
VT010M-1232A
Compatible
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
12 info@chrom4.com :: www.chrom4.com
TechComp (Formerly Bruker/Varian)
Ordering Information - 1.1mL Screw/Crimp Microvial and Cap
Ordering Information - 8mm Screw Caps w/Septa
Ordering Information - 2mL Screw Vials, 12 x 32mm, 8mm OpeningPART NO. (100pk) DESCRIPTIONVT008M-1232 2mL Clear Glass Screw Vial with Marking SpotVT008M-1232A 2mL Amber Glass Screw Vial with Marking Spot
PART NO. (100pk) DESCRIPTIONI01-531 100µL Glass LV Insert, Conical Point, No SpringI01BS-530 100µL Glass LV Insert, Conical Precision Point, Plastic Bottom SpringI025-531 250µL Glass Flat Bottom Insert
PART NO. (100pk) DESCRIPTION
V1108-1232 1.1mL Clear Tapered Bottom Glass Screw Vial, 8-425V1111-1232 1.1mL Clear Tapered Bottom Glass Crimp Vial, 11mm
Ordering Information - Inserts
For 11mm crimp caps refer to page 4
VT008-1232
VT008M-1232
VT008M-1232AI01-531
I01BS-530
I025-531
PART NO. (100pk) DESCRIPTIONCLS39939 8mm Open Hole Black PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08R 8mm Open Hole Red PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08Y 8mm Open Hole Yellow PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08W 8mm Open Hole White PP Screw Cap, 8-425 Red PTFE/Silicone
C9SF-08Y
CLS39939
Compatible
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 13
CTC/LEAP
• Wide opening enables easy filling with viscousmaterials
• Improved label with filling lines makes handlingeasier
• Convenience Packs available
CTC/LEAP Autosampler Products
Ordering Information - Clear Glass Inserts
PART NO. (100pk) DESCRIPTION
VT009-1232 2mL Clear Glass Screw VialVT009M-1232 2mL Clear Glass Screw Vial with Marking SpotVT009M-1232A 2mL Amber Glass Screw Vial with Marking SpotVT009M-1232S 2mL Clear Glass Screw Vial with Marking Spot, Silanized
PART NO. (100pk) DESCRIPTIONI025BS-629 250µL Glass Conical Insert with Bottom SpringI025-630 350µL Glass Flat Bottom InsertI025GF-631 250µL Glass BM Hanging Conical Point Insert
I025BS-629I025GF-631
I025-630
Screw Vials, Caps and InsertsOrdering Information - 2mL Short Thread Screw Vials, 12 x 32mm, 9mm Opening
VT009-1232VT009M-1232
VT009M-1232A
Compatible
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
14 info@chrom4.com :: www.chrom4.com
CTC/LEAP
C39E-09B
C394E-09XG
C394E-09R
C395E-09XY
C395E-09R
C395E-09G
C395E-09B
C396-09SB
C397E-09B
*Slitted cap recommended for UHPLC
Ordering Information - 9mm Screw Caps with Septa*PART NO. (100pk) DESCRIPTION Agilent™ HP Part
C394E-09B 9mm Ribbed Blue Screw Cap, FEP/ButylRubber 5182-0717C394E-09G 9mm Ribbed Green Screw Cap, FEP/ButylRubber 5182-0718C394E-09R 9mm Ribbed Red Screw Cap, FEP/ButylRubber 5182-0719
9mm Ribbed Blue Screw Cap, PTFE/Silicone
9mm Smooth Blue Screw Cap, PTFE/Silicone
5182-0720
5182-0720
C395E-09G
C395E-09SG
9mm Ribbed Green Screw Cap, Red PTFE/White Silicone
9mm Smooth Green Screw Cap, Red PTFE/White Silicone
5182-0721
5182-0721
C395E-09R 9mm Ribbed Red Screw Cap, Red PTFE/White Silicone 5182-0722C395E-09Y 9mm Ribbed Yellow Screw Cap, Red PTFE/White Silicone -C395EB-09SBL 9mm Ribbed Black Screw Cap, Blue PTFE/White Silicone -
C396-09SB 9mm Smooth Blue Screw Cap, PTFE/Silicone/PTFE 5182-0723C396-09SG 9mm Smooth Green Screw Cap, PTFE/Silicone/PTFE 5182-0724C396-09SR 9mm Smooth Red Screw Cap, PTFE/Silicone/PTFE 5182-0725C396-09SY 9mm Smooth Yellow Screw Cap, PTFE/Silicone/PTFE -C397E-09B 9mm Ribbed Blue Screw Cap, Red PTFE/White Silicone with Slit* 5183-2076C397E-09R 9mm Ribbed Red Screw Cap, Red PTFE/White Siliconee with Slit* 5183-2078C397E-09G 9mm Ribbed Green Screw Cap, Red PTFE/White Silicone with Slit* 5183-2077C397E-09Y 9mm Ribbed Yellow Screw Cap, Red PTFE/White Silicone with Slit* -
C397E-09SB 9mm Smooth Blue Screw Cap, Red PTFE/White Silicone with Slit* 5183-2076C397E-09SR 9mm Smooth Red Screw Cap, Red PTFE/White Silicone with Slit* 5183-2078
C395E-09B
C395E-09SB
Compatible
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 15
CTC/LEAP
CTC/LEAP Headspace VialsOrdering Information - Screw Headspace Vials & Caps
Ordering Information - Crimp Headspace & SPME Vials & Caps
PART NO. (100pk) DESCRIPTIONVX0018-2346CTC 10mL Clear Glass Screw Vial, 23 x 46mm, 18-425VXX018-2375CTC 20mL Clear Headspace Glass Screw Vial, 23 x 75mm, 18-425
Ordering Information - Pre-assembled 18mm Magnetic Screw CapPART NO. (100pk) DESCRIPTIONCHR-1309 18mm Magnetic Silver Screw Cap, Silicone Blue Transparent/PTFE WhiteCHR-1414 18mm Magnetic Silver Screw Cap, PTFE White/Silicone BlueCHR-1416 18mm Magnetic Silver Screw Cap, Butyl Red/PTFE Grey
PART NO. (100pk) DESCRIPTION
VX0020B-2346X 10mL Clear Headspace Glass Crimp Vial, 23 x 46mm, Rounded BottomVXX020B-2375X 20mL Clear Headspace Glass Crimp Vial, 23 x 75mm, Rounded BottomVXX020SPME-2375 20mL SPME Clear Headspace Glass Crimp Vial, 23 x 75mm, Rounded Bottom
Ordering Information - Pre-assembled 20mm Magnetic Crimp Cap
PART NO. (100pk) DESCRIPTIONCLS-1535B 20mm Blue BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1536G 20mm Green BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1536GO 20mm Gold BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1535R 20mm Red BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1536S 20mm Silver BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil
CLS-1535B CLS-1536GCLS-1536GO
CLS-1535R CLS-1536S
CLS-1309CLS-1414
CLS-1416
VX0018-2346S
VX0018A-2346S
VX0018-2375S
VX0020B-2346X
VXX020B-2375X
Compatible
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
16 info@chrom4.com :: www.chrom4.com
Perkin Elmer
2mL screw vials for Autosystem GC only. Some customers prefer a 9mm vial for this application.For 9mm vials see page 6.
• Our glass products are borosilicate USP class 1 • Strain point : 565°C• Please note that some manufacturers refer to
2mL vials as 1.5mL or 1.8mm
Our recommended vials, caps and inserts are specifically designed and made for Perkin Elmer autosamplers.Perkin Elmer autosamplers use a variety of screw and/or crimp vials.
In our list of vials below, we have tried to be as complete as possible, however if you have any questions please do not hesitate to call us.Perkin Elmer headspace autosamplers require a special rounded bottom/ beveled top vial. Please see page 26 for these vials and the corresponding caps.
Ordering Information - 2mL Screw Vials, 12 x 32mm, 8mm Opening
Screw Vials, Caps and Inserts
Perkin Elmer Autosampler Products
PART NO. (100pk) DESCRIPTION
VT008M-1232 2mL Clear Glass Screw Vial with Marking SpotVT008M-1232A 2mL Amber Glass Screw Vial with Marking Spot
PART NO. (100pk) DESCRIPTIONI01-531 100µL Glass LV Insert, Conical Point, No SpringI01BS-530 100µL Glass LV Insert, Conical Precision Point, Plastic Bottom SpringI025-531 250µL Glass Flat Bottom Insert
Ordering Information - Inserts
VT008-1232
VT008M-1232
VT008M-1232A
I01-531
I01BS-530
I025-531
C9SF-08Y
CLS39939
Ordering Information - 8mm Screw Caps with SeptaPART NO. (100pk) DESCRIPTIONCLS39939 8mm Open Hole Black PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08R 8mm Open Hole Red PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08Y 8mm Open Hole Yellow PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08W 8mm Open Hole White PP Screw Cap, 8-425 Red PTFE/Silicone
Compatible
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 17
Perkin Elmer
Ordering Information - 2mL Snap Vials, 12 x 32mm, 11mm Opening
Snap Vials, Caps and Inserts
* Please note that 50µL glass inserts actually hold a larger volume
PART NO. (100pk) DESCRIPTIONVT011SM-1232 2mL Clear Glass Snap Vial with Marking SpotVT11SM-1232A 2mL Amber Glass Snap Vial with Marking SpotV0111P-1232 100µL LVV Crimp/Snap Ring Vial, 11mm threadV0300P-1232 300µL Conical, Ultraclean Polypropylene, Snap/Crimp TopV0711P-1232 750µL Conical LVV Vial, Polypropylene, Snap/Crimp Top
PART NO. (100pk) DESCRIPTIONI005BS-625 50µL Glass LV Insert with Bottom Spring*I025BS-629 250µL Glass Conical Insert with Bottom SpringI025PBS-629 250µL Polypropylene Insert with Bottom SpringI025-630 350µL Glass Flat Bottom InsertI025GF-631 250µL Glass BM Hanging Conical Point Insert
Ordering Information - Inserts
V0300P-1232
VT011SM-1232
VT011SM-1232A
Snap vials & caps fit Autosystem GC, AI-1, Integral 4000, ISS-100 & ISS-200, LC 600(60), 420/b and4900.For the above mentionedautosamplers, you can use snap vials and caps or small opening 11mm crimp vials (see page 3).
Ordering Information - 8mm Crimp Vials
PART NO. (100pk) DESCRIPTIONV0308-632 300µL Clear Round Bottom Glass Crimp Vial, 8mmV0708-840 700µL Clear Flat Bottom Glass Crimp Vial, 8mmV0708M-840A 700µL Amber Tapered Bottom Glass Crimp Vial, 8mm with GraduationV0808-840 1.2mL Clear Glass Crimp Vial, 8mm
Crimp Vials, Caps
Ordering Information - 8mm Crimp CapsPART NO. (100pk) DESCRIPTIONC141-08 8mm Silver Crimp Cap, PTFE/ Natural RubberC150P-08EZ 8mm Silver Crimp Cap, PTFE/ Silicone
Perkin Elmer headspace vials on page 26
8mm flat bottom vials and caps fit AS-100, 100B, 300, 8300 and AI-1 autosamplers
V0308-632 V0608-840A
V0708-840A
V0808-830
C141-08 C150P-08 C180-08
For insert images refer to page 3. For snap caps refer to page 8.
Compatible
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
18 info@chrom4.com :: www.chrom4.com
Shimadzu
• Our glass products are borosilicate USP class 1 • Strain point : 565°C• Please note that some manufacturers refer to
2mL vials as 1.5mL or 1.8mL
Our recommended vials, caps and inserts are designed to fit Shimadzu autosamplers. Shimadzu autosamplers can take 2mL screw cap vials, 2mL crimp cap small opening vials or 4mL screw vials.Below you will find a guideline for the various types of autosamplers.
Shimadzu Autosampler Products
Shimadzu autosampler vials to fit : AOC-8B/9,SIL-6A, OC-14/1400, SIL-6B & SIL-9A
Ordering Information - 2mL Screw Vials, 12 x 32mm, 8mm Opening
4mL Screw Vials, 15 x 45mm, 13mm Opening and Pre-assembled Caps and SeptaShimadzu autosampler vials to fit :AOC-14/1400 & SIL-2AS
For corresponding inserts please see page 21, Waters 4mL vials
PART NO. (100pk) DESCRIPTIONVT008M-1232 2mL Clear Glass Screw Vial w/ Marking SpotVT008M-1232A 2mL Amber Glass Screw Vial w/ Marking Spot
<-
PART NO. (100pk) DESCRIPTIONVF013-1545 4mL Clear Screw Glass Vial, 13-425VF013A-1545 4mL Amber Screw Glass Vial, 13-425C06050-13 13mm Black Open-Hole Bonded Screw Cap, Red PTFE/Silicone 60mil
<-
VF013-1545
VF013A-1545
VF013MM-1545
VF013MA-1545C06050-13
C9SF-08Y
CLS39939
Ordering Information
Ordering Information - 8mm Screw Caps with SeptaPART NO. (100pk) DESCRIPTIONCLS39939 8mm Open Hole Black PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08R 8mm Open Hole Red PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08Y 8mm Open Hole Yellow PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08W 8mm Open Hole White PP Screw Cap, 8-425 Red PTFE/Silicone
Compatible
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 19
Shimadzu
Ordering Information - 2mL Crimp Vials, 12 x 32mm, 11mm Opening
PART NO. (100pk) DESCRIPTIONVT011-1232 2mL Clear Glass Crimp Vial
Shimadzu autosampler vials to fit: AOC-14/1400, SIL-6B & SIL-9A
VT011-1232 VT011A-1232
Ordering Information - 11mm Aluminum Crimp Caps with Septa
Crimpers & Decappers see page 24
PART NO. (100pk) DESCRIPTION Agilent™ HP Part
C142-11 11mm Silver Crimp Cap, PTFE/Butyl Rubber 5183-4498
C141-11B 11mm Blue Crimp Cap, PTFE/Synthetic 5181-1215C141-11G 11mm Green Crimp Cap, PTFE/Synthetic 5181-1216C141-11GO 11mm Gold Crimp Cap, PTFE/Synthetic -
C141-11R 11mm Red Crimp Cap, PTFE/Synthetic 5181-1217C150-11 11mm Silver Crimp Cap, PTFE/Silicone 5183-4500/5182-0552C160-11 11mm Silver Crimp Cap, PTFE/Silicone/PTFE 5183-4499/5181-1211C170-11 11mm Magnetic Crimp Cap, PTFE/Silicone -
C190-11 11mm Silver Crimp Cap, Red PTFE/White Silicone with Slit -
C141-11GOC190-11
C141-11G
C141-11B C142-11
C150-11 C170-11
C141-11R
C160-11
Compatible
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
20 info@chrom4.com :: www.chrom4.com
Waters
• Our glass products are borosilicate USP class 1 • Strain point : 535°C• 4mL (1 dram ) screw vial and 1mL shell vial for
respective 48 and 96 position carousel• Please note that some manufacturers refer to
2mL vials as 1.5mL or 1.8mL
The Waters Alliance 2690/95, 2790/95 and Acquity use a 2mL 9mm screw thread vial. Some chemists prefer a wide mouth (sometimes called ABC) vial.With a 9mm opening vial (VT009 Series) most chemists use the 9mm cap w/PTFE septa (C395-09B and C395S-09B). For Waters Acquity™ we recommend the slitted cap (C397-09B andC397S-09B).Also available in a clamshell.The Waters Wisp equipment uses a 4mL screw or 1mL shell vial.
Waters Autosampler Products
Ordering Information - 2mL Screw Vials, 12 x 32mm, 9mm Thread
Ordering Information - 9mm Screw Caps with Septa*
PART NO. (100pk) DESCRIPTION Waters PartVT009-1232 2mL Clear Glass Screw Vial -
-
VT009M-1232 2mL Clear Glass Screw Vial with Marking Spot 186000273VT009M-1232A 2mL Amber Glass Screw Vial with Marking Spot 186000848VT009M-1232S 2mL Clear Glass Screw Vial with Marking Spot, Silanzed WAT063300DV
PART NO. (100pk) DESCRIPTION Waters PartC394-09B 9mm Blue Screw Cap, PTFE/ButylRubber, Bonded -C394-09G 9mm Green Screw Cap, PTFE/ButylRubber, Bonded -C394-09R 9mm Red Screw Cap, PTFE/ButylRubber, Bonded -C394-09Y 9mm Yellow Screw Cap, PTFE/ButylRubber, Bonded -
C395S-09BC395-09B
9mm Blue Screw Cap, Beige PTFE/Silicone, Bonded9mm Blue Screw Cap, Beige PTFE/Silicone, Bonded
186000274186000274
C395S-09G 9mm Green Screw Cap, Beige PTFE/Silicone, Bonded 186002130C395S-09R 9mm Red Screw Cap, Beige PTFE/Silicone, Bonded -C395S-09Y 9mm Yellow Screw Cap, Beige PTFE/Silicone, Bonded -C396-09B 9mm Blue Screw Cap, PTFE/Silicone/PTFE, Bonded -C397-09B*** 9mm Blue Screw Cap, Red PTFE/Silicone with Slit Bonded* 186000305C397-09R*** 9mm Red Screw Cap, Red PTFE/Silicone with Slit Bonded* -C397S-09B*** 9mm Blue Screw Cap, Beige PTFE/Silicone with Slit Bonded* -C397S-09G*** 9mm Green Screw Cap, Beige PTFE/Silicone with Slit Bonded* -C397S-09R*** 9mm Red Screw Cap, Beige PTFE/Silicone with Slit Bonded*
*Slitted cap recommended for Waters UPLC™ and UHPLC
C394-09G C394-09R
C394-09BC395S-09G
C395S-09Y
C395S-09B
C396-09B
VT009-1232
VT009M-1232
VT009M-1232A
I025CP-631
I025PBS-629I025BS-629
I025-630
For ordering information see page 21
See page 22 for our QC certified vials.
V0159P-1232 2mL PP Short Thread Screw Vial with graduated volume, 12 x 32mm
V0159P-1232
Compatible
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 21
Waters
Ordering Information - 1mL Shell Vials, 8 x 40mm, with plug cap for Wisp
Waters Wisp 48 and 96 position
48-position tray*Also available as shell vial
Ordering Information - 4mL Screw Vials*, 15 x 45mm, 13mm Opening and Pre-assembled Caps and Septa
PART NO. (100pk) DESCRIPTION Waters Part
VF013-1545 4mL Clear Screw Glass Vial, 13-425 186000840VF013A-1545 4mL Amber Screw Glass Vial, 13-425 186001135C06050-13 13mm Black Open-Hole Bonded Screw Cap, Red PTFE/Silicone 60mil 186000841C360-13W 13mm White PP Closed Screw Cap, F217/PTFE -
PART NO. (100pk) DESCRIPTION Waters Part
I03-639 250µL Glass Mandrel Point Insert, Requires Metal Spring WAT072704I03-638X 250µL Glass Conical Insert, Requires Metal Spring WAT072708
PART NO. (100pk) DESCRIPTION Waters Part
V800-840C 1mL Clear Shell Vial & Plug QuickPack WAT025054CV800-840A 1mL Amber Shell Vial & Plug QuickPack WAT025053CV800-840S 1mL Amber Shell Vial & Plug QuickPack, Silanized -
PART NO. (100pk) DESCRIPTIONI01BS-530 100µL Glass LV Insert with Bottom SpringI01PBS-530 100µL PP LV Insert with Bottom SpringI025-629 250µL Mandrel Point Insert, Requires Metal SpringI025BS-629 250µL Glass Conical Insert with Bottom Spring
96-position tray
Ordering Information - Inserts
Inserts for 1mL Shell Vials
VE2078-1545
I03-639
I03-638X
C360-13W
For insert images refer to pages 7 and 20
For 4mL screw vial images, refer to page 18
PART NO. (100pk) DESCRIPTION Waters PartI005BS-625 50µL Glass LV Insert with Bottom Spring* -I025BS-629 250µL Glass Conical Insert with Bottom Spring WAT094170I025PBS-629 250µL Polypropylene Insert with Bottom Spring -I025-630 350µL Glass Flat Bottom Insert -I025GF-631 250µL Glass BM Hanging Conical Point Insert -I025CP-631 250µL Conical Point Glass Insert, 6 x 31mm for 2mL WM Crimp Vials -
Ordering Information - Inserts
* Please note that 50µL glass inserts actually hold a larger volume
Compatible
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
22 info@chrom4.com :: www.chrom4.com
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
LC Certified Combi-KitsDue to customer requests, Chrom4 is now providing QC Certified vial and cap Combi-Kits.
These certified Combi-Kits are identical to the Combi-Kits found on page 23 of the Sample Handling section of this cat-alogue, but will include certificiation documentation.
Every batch of LC certified Combi-Kits is tested on 16 critical parameters. The vial and cap combinations are checked for blanks and contamination by HPLC/UV and LC-MS testing.
Certified Combi-Kits include the batch-specific test results and the HPLC/LC-MS chromatograms.
The LC certified Combi-Kit components are shipped shrinkwrapped to ensure purity, transport and end user safety.
Certified Combi-Kits are available in a 2mL Short Thread clear and amber vial with appropriate cap.
Other Chrom4 certified Combi-Kits are available on request.
Ordering Information - Combi-Kit - Not assembled (Cap in separate compartment)PART NO. (100pk) DESCRIPTION9mm 9-425 ThreadFor Agilent Auto SamplersVT009M/C395ESBCERT HPLC/LC-MS Certified 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone
VT009MA/C395ESBCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone
For Agilent Auto SamplersVT009M/C397ESBCERT HPLC/LC-MS Certified 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone w/ Slit*
VT009MA/C397ESBCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone with Slit*
For Waters Auto SamplersVT009M/C395BCERT HPLC/LC-MS Certified 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Bonded
VT009MA/C395BCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Bonded
For Waters Auto SamplersVT009M/C397BCERT HPLC/LC-MS Certified 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded w/Slit*
VT009MA/C397BCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded w/Slit*
Combi-Kits consist of 100 vials and 100 matching caps.
*Slitted cap recommended for Waters UPLC™ and UHPLC
LC Certified Combi-Kits - Test parametersCleanVial• Glass- Hydrolytic Class 1;51
expansion Borosilicate;meets all requirementsof Phrm. US, EU, JPN;class 10.000 cleanroom standard
• Height• Diameter• Bottom Thickness• Neck Length• Thread Profile• Annealing
CleanCap• Diameter• Height• Thread Integrity• Septa Bonding• Sealing/Resealing Test • Extractables
Chemical Test Non-volatile Residue• HPLC UV Test• LC-MS Test
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 23
Combi-Kits - Vial and Cap
Ordering Information - Vials and Caps - Not assembled (Cap in separate compartment)
PART NO. (100pk) DESCRIPTION9mm 9-425 ThreadFor Agilent Auto SamplersVT009/C395ESB 2mL Clear Screw Vial, Blue Cap, Red PTFE/White Silicone, Combi-KitVT009M/C395ESB 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Combi-KitVT009MA/C395ESB 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Combi-Kit
For Agilent Auto SamplersVT009/C397ESB 2mL Clear Screw Vial, Blue Cap, Red PTFE/White Silicone with Slit, Combi-KitVT009M/C397ESB 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone with Slit*, Combi-KitVT009MA/C397ESB 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone with Slit*, Combi-Kit
For Waters Auto SamplersVT009/C395B 2mL Clear Screw Vial, Blue Cap, Red PTFE/White Silicone, Bonded, Combi-KitVT009M/C395B 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Bonded, Combi-KitVT009MA/C395B 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Bonded, Combi-Kit
For Waters Auto SamplersVT009/C397B 2mL Clear Screw Vial, Blue Cap, Red PTFE/White Silicone, Bonded with Slit, Combi-KitVT009M/C397B 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded with Slit*, Combi-KitVT009MA/C397B 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded with Slit*, Combi-Kit
Ordering Information - Caps Pre-assembled on VialsPART NO. (100pk) DESCRIPTION853959B-1232 2mL Clear Vial with Marking Spot Assembled with 9mm Blue Cap Red PTFE/White Silicone853959BA-1232 2mL Amber Vial with Marking Spot Assembled with 9mm Blue Cap Red PTFE/White Silicone853979B-1232 2mL Clear Vial with Marking Spot Assembled with 9mm Blue Cap Red PTFE/White Silicone Slitted853979B-1232A 2mL Amber Vial with Marking Spot Assembled with 9mm Blue Cap Red PTFE/White Silicone Slitted
853979B-1232A 853959B-1232
*Slitted cap recommended for Waters UPLC™ and UHPLC
Combi-Kits consist of 100 vials and 100 matching caps.
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
24 info@chrom4.com :: www.chrom4.com
Crimpers/Decappers and Storage Vials
Manual Crimpers and Decappers
Ordering Information - Manual Crimpers and DecappersPART NO. DESCRIPTIONCR00-08 8mm Hand Operated CrimperCR00-11 11mm Hand Operated CrimperCR00-20 20mm Hand Operated CrimperCR10-08 8mm Hand Operated DecapperCR10-11 11mm Hand Operated DecapperCR10-20 20mm Hand Operated DecapperCR20-08 8mm Crimp Type DecapperCR20-11 11mm Crimp Type DecapperCR20-20 20mm Crimp Type Decapper
Storage Vials
Storage Caps
Ordering Information - Storage Vials Pack
• Storage vials are available in 1, 2, 3 and 4 dram (4mL, 7mL, 12mL and 15mL).• Amber also available
Ordering Information - Closed Caps with PTFE/F217 Septa. White Virgin Septa (0.015”) or Unlined Caps Available.
PART NO. (100pk) DESCRIPTION
VF013-1545 4mL Clear Screw Glass Vial, 15 x 45mm, 13-425 ThreadVF013A-1545 4mL Amber Screw Glass Vial, 15 x 45mm, 13-425 ThreadVF013MM-1545 4mL Clear Screw Glass Vial, w/ Marking Spot, 15 x 45mm, 13-425 ThreadVF013MA-1545 4mL Amber Screw Glass Vial, w/ Marking Spot, 15 x 45mm, 13-425 ThreadVS015-1760X 7mL Clear Screw Glass Vial, 17 x 60mm, 15-425 Thread
VX2015-1965X 10mL Clear Screw Glass Vial, 19 x 65mm, 15-425 ThreadV16018-2170X 15mL Clear Screw Glass Vial, 21 x 70mm, 18-425 Thread
C360-13W
VS015-1760X
PART NO. (100pk) DESCRIPTIONC360-13W 13mm White PP Closed Screw Cap, F217/PTFEC360-15W 15mm White PP Closed Screw Cap, F217/PTFEC360-18W 18mm White PP Closed Screw Cap, F217/PTFE
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 25
Headspace Vials
Headspace Vials• Our glass products are borosilicate type 1
glass• Strain point : 565°C• 6, 10 and 20mL headspace vials are available
with flat bottom or rounded bottom
To get reproducible results it is very important that the headspace vials and caps form a tight seal.In headspace analysis, the sample is sealed into the vial and heated until the concentration in the gas phase is in equilibrium with the concentration in the liquid phase. A sample from the headspace is then analyzed.Our headspace vials are according to manufacturersʼ guidelines.
Ordering Information - Headspace Vials & Caps (Agilent™, TechComp (Formerly Bruker/Varian), Tekmar Compatible)
PART NO. (100pk) DESCRIPTION Agilent™ Part
V06020-2338X 6mL Headspace Crimp Vial, 23 x 38m, 20mm 5182-0876VX0020-2346X 10mL Headspace Crimp Vial, 23 x 46mm, 20mm 5182-0838VXX020-2375X 20mL Headspace Crimp Vial, 23 x 75mm, 20mm 5182-0837Pre-assembled 20mm Headspace Cap and SeptaCHR-0030 20mm Aluminum Crimp Cap with Pharmafix Septa 5183-4479CHR-0031 20mm Aluminum Pressure Release Crimp Cap with Pharmafix Septa 5183-4480CLS-9508 20mm Aluminum Crimp Cap with Transparent Blue Septa -CLS-9980 20mm Safety Seal Crimp Cap, 3mm Tan Teflon/White Silicone Septa 5183-4478CLS-9981 20mm Silver Crimp Cap, 3mm Tan Teflon/White Slicone Septa 5183-4477
Ordering Information Screw Headspace Vials & Caps CTC/Leap Technologies
PART NO. (100pk) DESCRIPTIONVX0018-2346CTC 10mL Clear Headspace Glass Screw Vial, 23 x 46mm, 18-425VXX018-2375CTC 20mL Clear Headspace Glass Screw Vial, 23 x 75mm, 18-425Pre-assembled 18mm Magnetic Headspace Screw Cap and SeptaCHR-1309 18mm Silver Screw cap, Silicone Blue Transparent/PTFE WhiteCHR-1414 18mm Silver Screw cap, PTFE White/Silicone BlueCHR-1416 18mm Silver Screw cap, Butyl Red/PTFE Grey
V06020-2338X
VX0020-2346X
VXX020-2375XP
CLS-0030
CLS-9508
CLS-9980
VX0018-2346S
VXX018-2375S
For crimpers and
decappers see page 24
*For Tekmar (7000HT) and TechComp (formerly Bruker/Varian)
CLS-1309CLS-1414
CLS-1416
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
26 info@chrom4.com :: www.chrom4.com
Headspace Vials
Ordering Information - Crimp Headspace Vials & Caps Perkin Elmer
PART NO. (100pk) DESCRIPTION
VX0020PE-2346 10mL Headspace Crimp Vial, 23 x 46mm, 20mmVXX020PE-2375 20mL Headspace Crimp Vial, 23 x 75mm, 20mm
Pre-assembled 20mm Headspace Cap and SeptaCHR-0031 20mm Aluminum Pressure Release Crimp Cap with Pharmafix SeptaCLS-9980 20mm Aluminum Pressure Release Crimp Cap, 3mm Tan Teflon/White Sil. SeptaCLS-9981 20mm Silver Crimp Cap, 3mm Tan Teflon/White Slicone Septa
PART NO. (100pk) DESCRIPTIONVX0020B-2346X 10mL Clear Headspace Glass Crimp Vial, Rounded Bottom, 23 x 46mmVXX020B-2375X 20mL Clear Headspace Crimp Vial, Round Bottom, 23 x 75mm, 20mm
Pre-assembled 20mm Magnetic Headspace Crimp Cap and SeptaCLS-1535B 20mm Blue BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1536G 20mm Green BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1536GO 20mm Gold BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1535R 20mm Red BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1536S 20mm Silver BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil
Ordering Information - Crimp Headspace Vials & Caps CTC/Leap Technologies
VXX020PE-2375
VX0020B-2346X
VXX020B-2375X
CLS-1535B CLS-1536GCLS-1536GO
CLS-1535R CLS-1536S
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 27
High Recovery Vials
The High Recovery Vial has a precision formed limited volume insert style conical well, with less than 2µL dead volume in the center of a solid glass bottom. This allows an autosampler to recover virtually the total sample and eliminates the need for limited volume inserts, supports and springs.
•Precision Limited volume injections with less than 2µL dead volume
•Large opening Eliminates bent needle problem associated with limited volume inserts
•Vortexing Ideal for vortexing limited volume samples•Volume 2mL and 4mL available•Concentrate samples in the same vial that you will use
in the autosampler
•Solid glass base offers better heat sink for concentrating samples
•Screw top, crimp top and snap cap vials available •Deactivated version available. Ideal for working with
protein, DNA and RNA
High Recovery Vial
Ordering Information - InSert Vial Glass wide mouth 12 x 32mm,with fused-in 300µL capacity insert
High Recovery Vials
PART NO. (100pk) DESCRIPTIONCHR05100CR 2mL High Recovery Crimp Top VialCHR05100SN 2mL High Recovery Snap Top VialCHR05100SC 2mL High Recovery Wide Mouth Screw Top Vial
Ordering Information - High Recovery Vial 12 x 32mm, wide mouth, 2mL
PART NO. (100pk) DESCRIPTIONVB311C-1232 2mL Clear Crimp Vial, Fused in 300µL insert, Fused BottomVB311-1232 2mL Clear Crimp/Snap Ring Vial, Fused in 300µL insert, Fused BottomVB309-1232 2mL Clear Wide Mouth Screw Vial, Fused in 300µL insert, Fused BottomVG311C-1232 2mL Clear Crimp Vial, Fused in 300µL insert, Fused Top, for GC applicationsVG311-1232 2mL Clear Crimp/Snap Ring Vial, Fused in 300µL insert, Fused Top, for GC applicationsVG309-1232 2mL Clear Wide Mouth Screw Vial, Fused in 300µL insert, Fused Top, for GC applications
For caps see page 4, 6 and 8.CHR05100CR
CHR05100SN
CHR05100SC
NEW
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
28 info@chrom4.com :: www.chrom4.com
Microplates - Cap Mats
PART NO. DESCRIPTION QUANTITYPV-219004 EVA Sealing Mat to fit 96-square Well Plates 50PV-219019 EVA Sealing Mat to fit 96-square Well Plates, sterile 50PV-219036 EVA Sealing Mat for 96-round Well Plates 50PV-219038 EVA Sealing Mat for 96-round Well Plates, black 50PV-219042 EVA Sealing Mat for 96-round Well Plates, sterile 50
96-Well Assay Conical Bottom Plate
PART NO. DESCRIPTION QUANTITYIS07-9605 96 Well Cap Mat, Round, 100% Silicone, PTFE Coating eachIS07-9611 96 Well Cap Mat, Square, 100% Silicone, PTFE Coating eachIS07-9612 96 Well Cap Mat, Square, 100% Silicone, PTFE Coating with Slit eachIS07-9614 96 Well Cap Mat, Round, 100% Silicone, PTFE Coating with Slit eachIS07-9616 96 Well Cap Mat, Square, Wider plug, 100% Silicone, PTFE Coating eachIS07-9620 96 Well Clear, Ultra Thin Round Well, Soft Silicone, PTFE Coating with Slit each
96-Well Cap Mats
96-Well EVA Sealing Mats
IS07-9605 IS07-9611 IS07-9614 IS07-9616
IS07-9614
Ordering Information
Ordering Information
Ordering Information
96-Well 2mL Filter PlateOrdering Information
PART NO. DESCRIPTION QTY Agilent™ HP Part
FV-9356045 96 Well Assay Conical Bottom Plate 420 ul 50 5042-1385
Direct replacement for Agilent® 96 Well Plate, 0.5mL
PART NO. DESCRIPTION QTY
FV-931919 96 Well 2mL Filter Plate 25 M Long drip 25
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 29
96-Well Storage and Collection Plates
96-Well, Deep, Square (47mm height)
• Made from virgin polypropylene• Tested for low extractables• Tight specification levels• V bottom to allow total liquid removal, partial collection and to aid re-suspension• No inner edges to allow better collection of magnetic beads• Manufactured under DNase/ RNase free environment• Working volumes of 350µL, 1mL and 2mL• Raised well rims to improve heat sealing• Conical base which aids sample concentration, reconstitution and centrifugation• Sterile and non-sterile versions available
The family of 96 square well plates was designed so that it would make the interchange of plates simpler in automated systems. All three plates have the same geometry and the only variable is the well depth.
96-Well, Shallow, Round(14.7mm height)
• Manufactured in polypropylene• Alphanumeric grid reference• High rigidity allows for centrifugation• Round and V-bottom allow greater liquid removal and particulate collection• Raised rims improve sealing and stop cross contamination
Porvair Sciences offers three plates with well capacities of 350µL, 300µL and 240µL. They have flat, round or V bottoms and can be used for compound storage, screening and cultur-ing.
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
30 info@chrom4.com :: www.chrom4.com
96-Well Storage and Collection Plates
96-Well, Deep, Round(42mm height)
• Manufactured from pre-tested polypropylene for low extractables • Alphanumeric grid-referencing• DNase/ RNase free• Packed in sealed sleeves of 5 plates• Rimmed version to stop cross contamination and enable a better seal• Non rimmed version to allow insertion of vials, or where the seal is not crucial• Cylindrical well with round bottom for optimal mixing and recovery• Very easy to use with automated sample handling systems• Can be stored at -80ºC
The plates are manufactured in polypropylene to minimize extractables. Working volume is 1mL per well and total volume is 1.1mL. Coloured plates aid identification when retrieving from storage. Black plates are suitable for storing light sensitive compounds.
Ordering Information - 96-Well Plates
PART NO. DESCRIPTION QTY96-Well, Deep, SquarePV-219006 96 Deep Well, 350µL, PP, Square 50PV-219025 96 Deep Well, 350µL, Sterile PP, Square 50PV-219008-50 96 Deep Well, 1mL, PP, Square 50PV-219026 96 Deep Well, 1mL, Sterile PP, Square 50PV-219009-50 96 Deep Well, 2mL, PP, Square 50PV-219027 96 Deep Well, 2mL, Sterile PP, Square 5096-Well, Shallow RoundPV-208003 96 Shallow Well, 350µL, PP, Flat Bottom, Rimless 100PV-209003 96 Shallow Well, 300µL, PP, Round Bottom, Raised Rim 100PV-210003 96 Shallow Well, 150µL, PP, V Bottom, Raised Rim 10096-Well, Deep RoundPV-219002 96 Deep Well, 1mL, PP, Round Bottom, Raised Rim, Natural 50PV-219012 96 Deep Well, 1mL, Sterile PP, Round Bottom, Raised Rim, Natural 50PV-219037 96 Deep Well, 1mL, PP, Round Bottom, Rimless, Natural 50PV-219432 96 Deep Well, 1mL, PP, Round Bottom, Raised Rim, Blue 50PV-219422 96 Deep Well, 1mL, PP, Round Bottom, Raised Rim, Red 50PV-219412 96 Deep Well, 1mL, PP, Round Bottom, Raised Rim, Black 50
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com 31
Riplate® 1mL• In polypropylene or polystyrene, Riplate® 1mL can
be used for high-throughput screening, combinatori-al chemistry, storage and preparation of essays etc.
• Riplate® 1mL is suitable for extreme temperature conditions like freezing or defrosting in the micro-wave.
• U-shaped well bottom reduces the death-volume.• Due to the high chemical resistance riplate® 1ml
is ideal for sensitive diagnostic applications. Riplate® 1mL is also in bioclean® (sterile) available.
Riplate® 1mL Plus• Raised wells reduce the risk of crosscontamination
and increase the security of hot sealing or sealing with adhesive foils. An improved footprint according to the SBS-standard and eight ventilation holes make Riplate® 1mL Plus the ideal format for use in a thermo-cycler or for defrosting of samples in a hot-water bath.
• Very high chemical resistance for chem cal agents and aggressive solutions
• High rigidity during centrifugation• New developed conical well permit a good bioturbation• Small rims around the wells avoid cross contamination
Riplate® 1mL is a registered trademark of Ritter, which has received a high confidence level by our customers, as Riplate® 1mL is the ideally compatible plate for many applica-tions, as well in its chemical or physical characteristics.
Riplate® 1mL-96-well-systems are in accordance with the SBS standard*and are suitable for all automation systems with the corresponding closing/sealing mechanism and for all 8- and 12-canal-pipettes. The classic formats Riplate® 1mL PP and PS are completed by the new format Riplate® 1mL Plus.
Riplate® 1mL medio are suited for screening, mixing and centrifugation of samples, as well as for the storage and preparation of substances. Through the compact construction Riplate® medio are stackable and through the low height you need approx. 50% storage capacity.*Society for Biomolecular Screening
Microplates
96-Well, Round, Low Profile • Allows stacking in higher densities • Minimizes space needed for compound
storage• Pure virgin polypropylene• Matching snug-fitting cap mat
A new introduction to the Porvair range is a low profile 1.1mL 96-well round plate with a height of just 27mm. This allows more plates to be stored or stacked in a
given space. The plates are made with extractable-free polypropylene for excellent results.
A specific anti-evaporation cap mat is also available for this plate manufac-tured from thermoplastic elastomer.
Riplate® - Deep Well Plate
Ordering Information
PART NO. DESCRIPTION QTY96-Well, Round, Low ProfilePV-219250 96 Well, Low Profile, 1.1mL per well, 27mm high Storage Plate 50PV-219251 Thermoplastic Elastomer Cap Mat to fit PV-219250 100Riplate® Deep Well PlateRP96WUB-1ML 1mL PP Round Well Plate, Round Bottom 20RP96RWUB-1ML 1mL PP Round Raised Well Plate, Round Bottom 20RP96WUB-2ML 2mL PP Round Well Plate, Round Bottom 20
See page 28 for cap mats
Riplate® Deep Well Plate Now also available in 2mL round
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
32 info@chrom4.com :: www.chrom4.com
Vial Selection Criteria
VT011L-1232 VT011LM-1232 VT11LM-1232A V1111-1232 CHR05100CR VT011-1232 VB311MC-1232
VT008-1232
VT008A-1232
VT008M-1232 VT008M-1232A V1108-1232 VT010-1232 VT010M-1232 VT010M-1232A
Crimp Neck 11mm
Snap Ring 11mm
Short Thread 9mm
Screw Neck 8mm, small opening Screw Neck 10mm, wide opening
smallopening
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
VT009-1232 VT009M-1232 VT009M-1232A VB309M-1232VB309M-1232A
VT309M-1232 V0309P-1232 CHR05100SC
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
VT011S-1232 VT011SM-1232 VT11SM-1232A VT311P-1232
V0300P-1232 VB311M-1232
VT311MC-1232
mm6.11 x 23
mm6.11
x 23
mm6.11
x 23
mm6.11 x 23
mm6.11 x 23
mm6.11 x 23
V0159P-1232
NEW for Ion
Chromatography
*
*
** Please inquire
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 33
Vial Selection Criteria
V0308-632 V0606-632 V0808-830 V0808-840 V0808A-840 V0708-840 V0708-840 V0708-840A V0608-840A
I025BS-629
Micro-Inserts for wide opening Micro-Inserts for small opening
Screw Neck 13mm
Crimp Neck 8mm
mm6 x 13
mm6 x 13
mm7.5 x 92
mm5 x 13
mm5 x 13
mm4 x 5.72
mm6 x 13
mm5.5 x 5.13
mm5.5 x 5.13
mm2.8 x 03
mm2.8 x 04
mm2.8 x 04
mm7 x 04
mm7 x 04
mm7 x 04
mm7.41 x 54
mm7.41 x 54
mm6 x 04
mm7 x 03
mm5 x 13
V800-840Q V800-840AQ
Waters Shell Vials, 1ml (Insert)
mm2.8 x 04
mm2.8 x 04
I025-630 I025-530
VF013-1545 VF013-1545A
VX0020B-2346XVX0020BA-2346X
VX0020-2346X VXX020-2375X VXX020B-2375XVXX020BA-2375X
VXX020SPME-2375 VX0020BS-2346X VXX020BS-2375X
Headspace 20mm Crimp
mm5.22 x 64
mm5.22 x 64
mm5.22 x 5.57
mm5.22 x 5.57
mm5.22 x 5.57
V0808A-830
mm2.8 x 03
mm5 x 92
mm5 x 43
I025CP-631 I025TP-631 I01-531 I025-629 I015TP-428
mm6 x 54.34
I025BS-529
CHR0146 I045-4306 CHR0651
I025GF-631
mm6 x 13
mm32 x 5.5746
x 2
2.5m
m
CHR0865 CHR0866 CHR0357 CHR0669 CHR0269 CHR0279 CHR0968CHR0129 CHR1240
C
V0708-740 V0708-740A
info@chrom4.com :: www.chrom4.com34
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats
Vial Selection Criteria
Mentioned trademarks are registered trademarks of their respective owners. No license or immunity under any patent is granted or implied by our sale of any material. CHROM4 is not affiliated with any of the companies listed below, or their products. Products listed under the companies below are compatible with their instrumentation. Agilent™, Beckman, Bruker, CTC/Leap, Perkin Elmer, Shimadzu, Waters
Sample Preparation
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 35
Sample Preparation
FiltrationFilter Membrane Compatibility Chart
Filter Membrane Chemical Compatibility Chart
Chemical
noly
N
EF
TP
FD
VP
esol
ulleC
detarene
geR
AcidsAcetic, 25% L C C CAcetic, Glacial L C C CFormic, 25% N C C CHydrochloric, 25% L C C CHydrochloric, Concentrated N N C CSulfuric, 25% N C C CSulfuric, Concentrated N C L LNitric, 25% N C L CNitric, Concentrated N C L NPhosphoric, 25% N C C CTrichloroacetic, 10% L C C C
BasesAmmonium Hydroxide, 25% C C L —Sodium Hydroxide, 3 Normal C C C —
AlcoholsAmyl Alcohol C C C CBenzyl Alcohol C C C CButyl Alcohol C C C CEthanol, 70% C C C CEthanol, 98% C C C CEthylene Glycol C C C CGlycerine (Glycerol) C C C CIsopropanol C C C CMethanol, 98% C C C Cn-Propanol C C C CPropylene Glycol C C C C
HydrocarbonsBenzene C C C CHexane, Xylene C C C CKerosene, Gasoline C C C CTetralin, Decalin C C C —Toluene C C C C
Halogenated HydrocarbonsCarbon Tetrachloride C C C CChlorobenzene (Mono) C C C CChloroform L C C CFreon C C C CMethylene Chloride L C C CTrichloroethane C C C CTrichloroethylene C C C C
Filter Membrane Chemical Compatibility Chart
Chemical
noly
N
EF
TP
FD
VP
esol
ulleC
detarene
geR
KetonesAcetone C C N CCyclohexanone C C N CIsopropylacetone C C N —Methyl Ethyl Ketone C C L CMethyl Isobutyl Ketone (MIBK) C C N C
Esters2-Ethoxyethyl Acetate L L L CAmyl Acetate C C C CBenzyl Benzoate C C — CButyl Acetate C C C CEthyl Acetate C C C CIsopropyl Myristate C C — CMethyl Acetate L C L CPropyl Acetate L N C CPropylene Glycol Acetate L C — CMethyl Cellosolve Acetate C C C CTricresyl Phosphate — C — C
Oxides — EthersAcetonitrile (Methyl Cyanide) C C C CAniline L C C CDiethyl Acetamide C C C CDimethyl Formamide C C N LDimethyl Sulfoxide (DMSO) L C C LDioxane C C L LEthyl Ether C C C CIsopropyl Ether C C N —Pyridine C C L C
Solvents with NitrogenTetrahydrofuran C C L LTriethanolamine C C C C
MiscellaneousFormaldehyde Solution, 30% C C C LHydrogen Peroxide, 30% N C C CPhenol, Aqueous, 10% N C L CSilicone Oil and Mineral Oil C C C C
LEGEND - C=Compatible, L=Limited Compatibility, N=Not Compatible, =No Data Available, PTFE=Teflon®, PVDF=Polyvinyledene Difloride
Sample Preparation
info@chrom4.com :: www.chrom4.com 37
Syringe and Membrane Filters
InnoSep™CHROM4 Offers Affordable, Quality Syringe Filters
Housing Polypropylene housings are highly solvent resistant and exhibit low extractables. They are ideal for filtering samples or solvents used in chromatography.
Size4mm syringe filters are useful for filtration up to 1mL of low particulate level chromatography of biological samples.17mm syringe filters have a filtration area of 1.3cm2 and a hold-up volume of less than 30uL with an air purge.Ideal for samples up to 12mL.30mm syringe filters have a filtration area of 4.9cm2 and offer the fastest sample filtration.
MembraneThe cellulose acetate and polysulfone membranes are all low protein binding, which makes them well suited for filtration of biological samples.PTFE membrane in a PP housing can be used to filter sol-vents and strong acids.Although PTFE is inherently hydrophobic, it can be made hydrophilic by pre-wetting the membrane with methanol and then rinsing with water.Nylon or polypropylene are ideal for filtration of chromatogra-phy samples.Polypropylene membranes exhibit near zero extractables, arevery resistant to solvents and most chemicals and would be the first choice for filtration of chromatography samples.
Next to our excellent InnoSep™ line, we also carry a complete transfer membrane line.
See page 35 for Filter Membrane Compatibility Chart
Material Description Features Application Pore SizeCA Internally supported
cellulose acetate• Lowest binding material available• Highest throughput• Strength and dimension stability• Uniform pore structure• Hydrophilic
• Tissue culture media sterilization• Protein & enzyme filtration sterilization• Biological fluid filtration, sterilization• Tissue culture media sterilization
0.22 - 5.0
Glass Fiber Glass fiber prefilters • Biologically inert• Available with or without acrylic binders• High dirt-holding capacity
• Gravimetric analysis• Prefilter to extend final filter life• Clarification of particulate laden solutions
0.5, 0.7, 1.0
NC Unsupported nitrocellulose mixed cellulose esters
• Consistent flow rates• High throughputs• Uniform pore structure• Hydrophilic
• Aqueous filtration• Microbiological analysis• Sterility testing• Gravimetric analysis with ashing technique• Particulate analysis
0.1 - 8.0
Nylon Internally supported nylon • Naturally hydrophilic• Wide chemical compatibility range• Extremely low extractables• Strength and dimensional stability
• Sterilization, clarification of aqueous and organic solvent solutions• LC sample preparation
0.1 - 20.0
PP Polypropylene • Chemically and biologically inert• Wide chemical compatibility range• Extremely low extractables
• Sterilization, clarification of organic solvent solutions• LC sample preparation
0.1, 0.22, 0.45
PES Polyethersulfone • Low protein binding• Low extractables• Autoclavable• Wide chemical compatibility range• Strength and dimensional stability
• Tissue culture media sterilization• Protein and enzyme filtration, sterilization• Biological fluid filtration, sterilization • Ion chromatography
0.22 - 5.0
PVDF Polyvinylidene difluoride • Hydrophobic• Chemically inert towards many solvents, similar stability to PTFE
• Filtration of polar and non-polar solutions 0.2 - 0.45
PTFE Polytetrafluoroethylene(Teflon laminated onto a polypropylenesupport)
• Naturally hydrophilic• Compatible with strong acids and aggressive solvents• Improved durability and handling
• Filtration of strong acids and aggressive solvents• Venting applications
0.22, 0.45, 1.0
Sample Preparation
38 info@chrom4.com :: www.chrom4.com
Chrom4 Syringe Filters are available in a select number of filter media, diameters and pore sizes.Please contact us for ordering information on items not shown.
Membrane Materials: Cellulose Acetate, Nylon, PES, PTFE, PVDFMembrane Diameter: 25 mmEffective Filtration Area: 4.6 cm²Housing Diameter: 33 mmHousing Materials: PolypropyleneInlet / Outlet: FLL / MLL-MLSHoldup Volume: <100 microliterSample Volume: <120 mLMaximum Operating Temperature: PP - 90°C/194°FMaximum Operating Pressure: 80 psiSterile: NoAnti-burst ring: No
InnoSep™ SF25 N
SF6054-06N SF6058-06N
SF5510-06N SF5509-06N SF5508-06N
SF6055-06N SF6057-06N
SF5511-06N
Part Number Qty Description
SF5511-06N 100 25 mm PVDF 0.45 µm
SF5510-06N 100 25 mm PVDF 0.2 µm
SF6058-06N 100 25 mm PTFE 0.45 µm
SF6057-06N 100 25 mm PTFE 0.2 µm
SF6054-06N 100 25 mm Nylon 0.45 µm
SF6055-06N 100 25 mm Nylon 0.2 µm
SF5509-06N 100 25 mm PES 0.45 µm
SF5508-06N 100 25 mm PES 0.2 µm
SF5003-06N 100 25 mm CA 0.2 µm
SF5112-06N 100 25 mm CA 0.45µm
Sample Preparation
info@chrom4.com :: www.chrom4.com 39
Chrom4 Syringe Filters are available in a select number of filter media, diameters and pore sizes.Please contact us for ordering information on items not shown.
InnoSep™ SF13Membrane Materials: Nylon, PTFE, PVDFMembrane Diameter: 13 mmEffective Filtration Area: 0.65 cm²Housing Diameter: 13 mmHousing Materials: PolypropyleneInlet / Outlet: FLL-MLSSample Volume: < 10 mLMaximum Operating Pressure: 85 psiSterile: NoAnti-burst ring: Yes
Part Number Qty Description
CNY6502 100 13mm Nylon 0.2 µm
CNY6503 100 13mm Nylon 0.45 µm
CPT6500 100 13mm PTFE 0.2 µm
CPT6505 100 13mm PTFE 0.45 µm
CPV6501 100 13mm PVDF 0.2 µm
CPV6504 100 13mm PVDF 0.45 µm
CNY6502 CPT6500 CPV6501 CPV6504CNY6503 CPT6505
Sample Preparation
40 info@chrom4.com :: www.chrom4.com
Nylon• Naturally hydrophilic• Wide chemical compatibility range, organic solvent resistance (except acidsandbases)• Internally supported• Strength and dimensional stability• High binding capacity, high dirt loading capacity• Available in gridded and 1+ PK for testing
Polytetrafluoroethylene (PTFE)• Naturally hydrophilic• Compatible with strong acids and aggressive solvents• Improved durability and handling
Polyvinylidene Difluoride (PVDF)• Hydrophobic• Suitable for filtration of polar and non-polar solutions• Chemically inert towards many solvents, similar stability to PTFE
Membrane Filters
Chrom4 Membrane Filters
Pre Cut Size (mm) 25 47 90
Qty Per package 100 100 25
Nylon 0.2µm SFNY202500 SFNY204700 SFNY2090250.45µm SFNY502500 SFNY504700 SFNY509025
PTFE0.2µm SFPT202500 SFPT204700 SFPT2090250.45µm SFPT502500 SFPT504700 SFPT509025
PVDF0.2µm SFPV202500 SFPV204700 SFPV2090250.45µm SFPV502500 SFPV504700 SFPV509025
Ordering Information
Sample Preparation
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 41
Separa Syringeless Filter VialsSave time with your sample prep process with SEPARA® filters and vials disposable device. Easy to press, fast and simple to use.
Available with 5 different membranes, 0.45 µm & 0.22 µm:
Ordering Information:
Features & BenefitsRapid single step sample preparationReduce sample loss. Ready to go for HPLC or UHPLC auto-samplerCompatible with most standard auto-samplers The pre-slit cap ensures easy and clean transfer of sample.
SpecificationsDimensions: 12mm I.D x 33mm heightMaterial: Polypropylene vial, Cap Septa, PTFE/siliconeFill line volume: 0.48mLFiltering capacity: 0.45mLDead volume: 30uL The force needed to compress the unit is estimated at8psi(0.6bar)Maximumoperatingtemperature:120°F(50°C)
PTFE RC PES PVDF NY
• Filtration of strong acids and aggressive solutions
• Drug Metabolite Studies (Protein PPT)
• Clarification of aqueous and organic solvent solutions• HPLC sample preparation
• Chromatography
• Filtration of Aqueous and Organic Solutions
• Analytical Sample Prep, uHPLC
• Chromatography• Clarification
• Protein Chemistry
• Biological Studies• ICP Sample Preparation
• Dissolution Testing
• Biological Studies• Clarification Studies
(wine industry)• Dissolution Testing
• Clarification of aqueous and organic solvent
solutions• HPLC sample preparation
• Chromatography
Item No. Description Membrane Pore Size (µm) UOM
FVNY020 Filter Vials, Snap Caps, Light Blue, pre-slit PTFE/Silicone Septa Nylon (NY) Hydrophilic 0.2 \100
FVNY045 Filter Vials, Snap Caps, Dark Blue, pre-slit PTFE/Silicone Septa Nylon (NY) Hydrophilic 0.45 \100
FVPES020 Filter Vials, Snap Caps, Light Green, pre-slit PTFE/Silicone Septa Polyethersulfone (PES) Hydrophilic 0.2 \100
FVPES045 Filter Vials, Snap Caps, Dark Green, pre-slit PTFE/Silicone Septa Polyethersulfone (PES) Hydrophilic 0.45 \100
FVPVDF020 Filter Vials, Snap Caps, Yellow, pre-slit PTFE/Silicone Septa Polyvinylidene Difluoride (PVDF) Hydrophilic 0.2 \100
FVPVDF045 Filter Vials, Snap Caps, Orange, pre-slit PTFE/Silicone Septa Polyvinylidene Difluoride (PVDF) Hydrophilic 0.45 \100
FVPTFE020 Filter Vials, Snap Caps, Pink, pre-slit PTFE/Silicone Septa Polytetrafluoroethylene (PTFE) Hydrophobic 0.2 \100
FVPTFE045 Filter Vials, Snap Caps, Red, pre-slit PTFE/Silicone Septa Polytetrafluoroethylene (PTFE) Hydrophobic 0.45 \100
FVRC020 Filter Vials, Snap Caps, Gray, pre-slit PTFE/Silicone Septa Regenerated Cellulose (RC) Hydrophilic 0.2 \100
FVRC045 Filter Vials, Snap Caps, Black, pre-slit PTFE/Silicone Septa Regenerated Cellulose (RC) Hydrophilic 0.45 \100
Sample Preparation
42 info@chrom4.com :: www.chrom4.com
Advantages of Polymeric Solid Phase Extraction
IRIS™ Polymeric SPE SorbentsIRIS™ sorbents are available in six different phase chemistries offering maximum
flexibility for method development.
IRIS PLUS 100% Divinylbenzene RP phase
Pore size: 80 ÅSurface area: ~700 m2/g
IRIS WCX Organic acid on DVB phase
Pore size: 80 ÅIon-Exchange capacity: ~1 meq/g
pKa ~5
IRIS NPolyamide phase - HLB* type sorbent
Pore size: 80 ÅSurface area: ~500 m2/g
IRIS WAXSecondary amine on DVB phase
Pore size: 80 ÅIon-Exchange capacity: ~1 meq/g
pKa ~7
IRIS MAXQuaternary amine phase
on DVB phasePore size: 80 Å
Ion-Exchange capacity: ~0.1 meg/gpKa >18
IRIS MCX Sulfonated hydrophilic
on DVB phasePore size: 80 Å
Ion-Exchange capacity: ~1 meq/gpKa <1
• Available in 25-35 µm
• Available in various cartridge sizes
and 96-well plate formats
* Localized hydrophilic/lipophilic base
1. Excellent recovery - highly retentive nature of polymeric phases2. High surface area that results in higher analyte capacity compared to silica based SPE3. Reduced resin volumes for improved detection limits and reduced drying time4. Inert to a wide array of solvents and pH ranges5. Absence of leachables6. Absence of residual silanol groups7. Resistant to dewetting
Low pKa Phase
High pKa Phase
Sample Preparation
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 43
IRIS™ Polymeric SPE SorbentsSorbent Analyte Properties Matrix/Sample Retention Elution
MIXED-MODE CATION-EXCHANGE
IRIS MCX IRIS WCX
Charged/Ionized compounds
• Cation-exchange
(basic) analytes
• Non-polar to moderately
polar hydrophobic
• Neutral
Aqueous – diluted
with buffer
Example:
Biological fluids
with buffer
Higher % of aqueous
solvent (water)
Lower % of organic solvent
Lower ionic strength
pH < pKa of analyte
pH > pKa of sorbent
Lower % of aqueous
solvent (water)
Higher % of organic solvent
Higher ionic strength
pH > pKa of analyte
pH < pKa of sorbent
MIXED-MODE ANION-EXCHANGE
IRIS MAXIRIS WAX
Charged/Ionized compounds
• Anion-exchange
(acidic) analytes
• Non-polar to moderately
polar hydrophobic
• Neutral
Aqueous – diluted
with buffer
Example:
Biological fluids
with buffer
Higher % of aqueous
solvent (water)
Lower % of organic solvent
Lower ionic strength
pH > pKa of analyte
pH < pKa of sorbent
Lower % of aqueous
solvent (water)
Higher % of organic solvent
Higher ionic strength
pH < pKa of analyte
pH > pKa of sorbent
REVERSED-PHASE
IRIS PLUS IRIS N
• Non-polar to moderately
polar hydrophobic
• Neutral
Example:
Pharmaceuticals,
pesticides, herbicides,
Alkaloids
Aqueous – diluted with buffer
Example:
Biological fluids, water
Higher % of aqueous
solvent (water)
Lower % of organic solvent
pH adjusted buffer to place
analyte in neutral form
(if applicable)
Lower % of aqueous
solvent (water)
Higher % of organic solvent
pH adjusted buffer to place
analyte in charged form
(if applicable)
NORMAL-PHASE
IRIS N
• Moderate to highly polar
• Neutral
Example:
Pesticides
Non-polar to moderately
polar organic
Example:
Biological fluids, oil, fats
Higher % of organic solvent
Lower % of aqueous solvent
(water)
pH adjusted buffer to place
analyte in neutral form
(if applicable)
Lower % of organic solvent
Higher % of water
pH adjusted buffer to place
analyte in neutral form
(if applicable)
IRIS™ General Method Guidelines
This table provides general method guidelines. Each IRIS polymeric SPE box contains detailed instructions for each specific phase.
Sample Preparation
44 info@chrom4.com :: www.chrom4.com
IRIS MCXpage #50
NOAnalyte Properties
NO
YES
YES
STRONG
IRIS WCXpage #52
IRIS PLUSpage #46
IRIS Npage #48
IRIS WAXpage #56
IRIS MAXpage #54
Strong Base?
Retention of
Neutrals?
Strong Acid?
*Acid, Neutral,
or *Base?
* If analytes contain both acids and bases, select the dominant interaction.
IRIS™ Sorbent Selection Guidelines
IRIS Sorbent Mass
Minimum Recommended Elution Volume
Typical Elution Volume
500 mg 5 mL 10 mL to 25 mL
200 mg 2 mL 3 mL to 10 mL
60 mg 600 µL 1.2 mL to 3 mL
30 mg 300 µL 0.6 mL to 2 mL
10 mg 100 µL 0.3 mL to 1 mL
* Elution volumes depend on the chemical nature of the analyte, its relative concentration in the matrix, the chemistry of the solution solvent and the sorbent bed mass. Please be advised that the tables above provide general guidelines. Please contact our technical support team for specific method development support or guidelines for specific applications.
Sample Type and Sorbent Mass Guidelines
Industry Typical ExampleTypical SampleVolume
Recommended Sorbent
MassRecommended
Reservoir
Environmental Drinking water,
Surface water,
Waste water, Soil
0.1 L to 1 L 200 mg 6 mL
Food & Agriculture Food homogenate
from Fish, Fruit, Meat,
Poultry, Wheat
1 mL to 3 mL 60 mg 3 mL
Clinical & Bioanalysis Blood, Plasma, Urinediluted
0.4 mL to 3 mL 30 mg 1 mL
BALANCED
Sample Preparation
info@chrom4.com :: www.chrom4.com 45
IRIS SPE Sample Extraction Products
• InnoSep Vacuum manifolds for SPE sample preparation, filtration,
and elution are available in 12, 16, and 24 port configurations.
• These manifolds permit consistent extraction and filtration
results. Multiple sample processing with these manifolds
simplifies procedures and saves time. The manifolds consist of a
clear glass chamber and lid to which a vacuum is applied to draw
a sample through an SPE column, cartridge, or disk.
• Adjustable racks placed in the glass vacuum chamber will
accommodate
a variety of sample collection vessels, including test tubes,
autosampler vials, volumetric flasks, and Erlenmeyer flasks.
Eluents are deposited directly into the collection vessel of choice
via polypropylene, optional stainless steel, or Teflon needles.
• Virgin polypropylene solid phase extraction cartridges with frits
• Available in format ranging from 1 mL to 6 mL
• High throughput SBS format plates compatible with
most automated systems
• Available with 10 mg, 30 mg and 60 mg bed mass
• Design for online solid phase extraction using a switching valve
• Wide choice of column configuration
• Online guard columns are available in 10x2.1 mm & 10x4.6 mm packed
with 5 µm of any of the six phase chemistries
(please inquire)
online columns & guard cartridges
innosep vacuum manifolds
cartridges (syringe barrel & frits)
96-well plates (deep well plate format)
Sample Preparation
46 info@chrom4.com :: www.chrom4.com
The IRIS PLUS is a 100% DVB phase. This unique polymer phase is our most retentive reversed-phase sorbent.
It is a great replacement for your current C18 or PS-DVB SPE sorbents.
• 100% Divinylbenzene (DVB) phase
• Pore Size: 80 Å
• Surface area: ~700 m2/g
• Available in 25-35 µm particle size
• Available in various cartridge sizes and 96-well plate formats
PLUS
iris plus
Part No. Description Particle Size Qty (Box)
IR34460 IRIS PLUS 10mg/1mL 25-35µm 100
IR34461 IRIS PLUS 30mg/1mL 25-35µm 100
IR34462 IRIS PLUS 30mg/3mL 25-35µm 100
IR34446 IRIS PLUS 60mg/3mL 25-35µm 100
IR34264 IRIS PLUS 100mg/3mL 25-35µm 100
IR34445 IRIS PLUS 200mg/6mL 25-35µm 30
IR34266 IRIS PLUS 500mg/6mL 25-35µm 30
IRIS PLUS SPE Cartridges
Part No. Description Particle Size Qty (Box)
IR96341 IRIS PLUS 96-well 10mg/1mL 25-35µm 1
IR96343 IRIS PLUS 96-well 30mg/1mL 25-35µm 1
IR96345 IRIS PLUS 96-well 60mg/1mL 25-35µm 1
IR96347 IRIS PLUS 96-well 30mg/2mL 25-35µm 1
IR96348 IRIS PLUS 96-well 60mg/2mL 25-35µm 1
IRIS PLUS SPE 96-well Plates
Sample Preparation
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 47
Polycyclic aromatic hydrocarbons - PAH
Features & Benefits
IRIS PLUS APPLICATION
• Higher Recoveries – due to the highly retentive nature of the DVB packing material
• Lower Background Signals – proprietary cleaning process for ultrapure resins decreasing background signals
• Durability – stability at pH extremes of 0-14
• Improved Detection Limits and Reduced Drying Time – using reduced resin volumes
• Eliminate Matrix Effects – cleaner sample extracts reduce or eliminate matrix ion suppression
• IRIS PLUS – most hydrophobic reversed-phase available
• Excellent for environmental samples
iris plus
Sorbent: IRIS PLUS - 200 mg/6mLPart Number: IR34445Solution Conc: 10 µg/mL in H2O
Recovery Rates:
ChryseneBenzo(a) Anthracene
104.8%
Benzo(b)FluorantheneBenzo(j)FluorantheneBenzo(k)Fluoranthene
106.5%
Benzo(a)pyreneBenzo(e)pyrene
106.5%
Indeno(1,2,3-cd)pyreneBenzo(g,h,i)peryleneDibenz(a,h)anthracene
98.7%
Figure 1: GCMS Chromatogram
Group 1
Group 2
Group 3
Group 4
Sample Preparation
48 info@chrom4.com :: www.chrom4.com
This novel polyamide polymer phase provides a highly hydrophilic/lipophilic balance making it the SPE material
with the widest applicability. The outstanding reversed-phase characteristics of this material are only one part of this
material’s success. This phase chemistry offers multiple interaction mechanisms and can be used for both reversed-
phase and normal-phase applications.
• Polyamide phase - HLB type sorbent
• Pore size: 80 Å
• Surface area: ~500 m2/g
• Available in 25-35 µm particle size
• Available in various cartridge sizes and 96-well plate formats
Niris n
Part No. Description Particle Size Qty (Box)
IR44460 IRIS N 10mg/1mL 25-35µm 100
IR44461 IRIS N 30mg/1mL 25-35µm 100
IR44462 IRIS N 30mg/3mL 25-35µm 100
IR44446 IRIS N 60mg/3mL 25-35µm 100
IR44264 IRIS N 100mg/3mL 25-35µm 100
IR44445 IRIS N 200mg/6mL 25-35µm 30
IR44266 IRIS N 500mg/6mL 25-35µm 30
IRIS N SPE Cartridges
Part No. Description Particle Size Qty (Box)
IR96441 IRIS N 96-well 10mg/1mL 25-35µm 1
IR96443 IRIS N 96-well 30mg/1mL 25-35µm 1
IR96445 IRIS N 96-well 60mg/1mL 25-35µm 1
IR96447 IRIS N 96-well 30mg/2mL 25-35µm 1
IR96448 IRIS N 96-well 60mg/2mL 25-35µm 1
IRIS N SPE 96-well Plates
R1
R2
R3N
O
Sample Preparation
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 49
IRIS N APPLICATION
Features & Benefits
• Localized Hydrophilic/Lipophilic Base (HLB type sorbent) – using a combination of polar and non-polar interactions to provide optimal analyte/resin contact
• Polyamide Stationary Phase – excellent water wettability using reversed-phase mode up to 100% aqueous solvent or normal-phase mode using up to 100% organic solvents
iris n
Estriol, Hydrocortisone, Betamethasone
Sorbent: IRIS N - 30mg/1mLPart Number: IR44461 Solution Conc: 6 µg/mL in H2O
Recovery Rates: Estriol Hydrocortisone Betamethasone Run 1 109.5% Run 1 104.4% Run 1 100.3% Run 2 104.1% Run 2 102.6% Run 2 100.8% Run 3 109.3% Run 3 103.8% Run 3 100.0%
Hydrocortisone
Estriol
Betamethasone
1917151375
Time (min)
mA
U
0
2
4
10
8
6
12
3 9 11
Estriol Hydrocortisone
14
Beamethasone
H
HHO
FO
OH
OHO
Sample Preparation
50 info@chrom4.com :: www.chrom4.com
IRIS MCX is a water-wettable sulfonated divinylbenzene mixed-mode phase for both cation-exchange and
reversed-phase applications. IRIS MCX allows for easy method development, through its dual retention qualities,
for a wide range of basic and neutral compounds. IRIS MCX shows excellent retention for essentially all of the
common basic drugs of abuse and similar amine containing compounds. The phase is stable over the complete
pH range (0-14) and can be used with nearly any solvent, allowing the use of a wide range of solvents.
• Sulfonated DVB phase
• Pore size: 80 Å
• Ion-Exchange capacity: ~1 meq/g
• pKa <1
• Available in 25-35 µm particle size
• Available in various cartridge sizes and 96-well plate formats
iris mcxMCX
Part No. Description Particle Size Qty (Box)
IR54460 IRIS MCX 10mg/1mL 25-35µm 100
IR54461 IRIS MCX 30mg/1mL 25-35µm 100
IR54462 IRIS MCX 30mg/3mL 25-35µm 100
IR54446 IRIS MCX 60mg/3mL 25-35µm 100
IR54264 IRIS MCX, 100mg/3mL 25-35µm 100
IR54445 IRIS MCX 200mg/6mL 25-35µm 30
IR54266 IRIS MCX 500mg/6mL 25-35µm 30
IRIS MCX SPE Cartridges
Part No. Description Particle Size Qty (Box)
IR96541 IRIS MCX 96-well 10mg/1mL 25-35µm 1
IR96543 IRIS MCX 96-well 30mg/1mL 25-35µm 1
IR96545 IRIS MCX 96-well 60mg/1mL 25-35µm 1
IR96547 IRIS MCX 96-well 30mg/2mL 25-35µm 1
IR96548 IRIS MCX 96-well 60mg/2mL 25-35µm 1
IRIS MCX SPE 96-well Plates
Sample Preparation
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 51
IRIS MCX APPLICATION
Features & Benefits
• Sulfonated DVB Phase – allows for cation-exchange and reversed-phase separations• 100% DVB – no swelling, increased retention, excellent flow properties and pH stability• Excellent Wettability – even after drying, due to hydrophilic/hydrophobic balance
iris mcx
Norephedrine & Ephedrine HydrochlorideSorbent: IRIS MCX - 30 mg/1mL
Part Number: IR54461Solution Conc: 50 µg/mL in H2O 0.1% Formic Acid Recovery Rates: Norephedrine Ephedrine Hydrochloride Hydrochloride Run 1 94.2% Run 1 94.7% Run 2 91.8% Run 2 92.7% Run 3 93.4% Run 3 96.4%
Note 1: After wash step cartridge was dried for 1 minute using vac. The collected elute solution was placed in a 2 ml volumetric and brought to the mark with H2O (0.1% formic acid).
Time (min)
mA
U
-2
3
18
4 6 10
Norephedrine Hydrochloride
Ephedrine Hydrochloride
Ephedrine Hydrochloride
23
13
8
8 12 14
Norephedrine Hydrochloride
Sample Preparation
52 info@chrom4.com :: www.chrom4.com
IRIS WCX is a weak cation-exchange divinylbenzene polymer phase. IRIS WCX eliminates the guesswork
commonly found in lengthy method development associated with strong bases such as quaternary amines.
This phase utilizes the chemical functionality of a carboxylic acid. When the phase is negatively charged, it
retains strong bases such as quaternary amines and releases them when neutral. IRIS WCX has repeatedly
proven consistency and reliability, reducing the need for time consuming and costly retesting.
• Organic acid on DVB phase
• Pore size: 80 Å
• Ion-Exchange capacity: ~1 meq/g
• pKa ~5
• Available in 25-35 µm particle size
• Available in various cartridge sizes and 96-well plate formats
WCX
iris wcx
Part No. Description Particle Size Qty (Box)
IR84012 IRIS WCX 10mg/1mL 25-35µm 100
IR84013 IRIS WCX 30mg/1mL 25-35µm 100
IR84023 IRIS WCX 30mg/3mL 25-35µm 100
IR84016 IRIS WCX 60mg/3mL 25-35µm 100
IR84019 IRIS WCX 200mg/6mL 25-35µm 30
IR84020 IRIS WCX 500mg/6mL 25-35µm 30
IR84021 IRIS WCX 1gram/6mL 25-35µm 10
IRIS WCX SPE Cartridges
Part No. Description Particle Size Qty (Box)
IR97008 IRIS WCX 96-well 10mg/1mL 25-35µm 1
IR97010 IRIS WCX 96-well 30mg/1mL 25-35µm 1
IR97012 IRIS WCX 96-well 60mg/1mL 25-35µm 1
IR97014 IRIS WCX 96-well 30mg/2mL 25-35µm 1
IR97015 IRIS WCX 96-well 60mg/2mL 25-35µm 1
IRIS WCX SPE 96-well Plates
Sample Preparation
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 53
IRIS WCX APPLICATION
Features & Benefits
• Organic Acid Phase – allows for tunable selectivity for strong bases• 100% DVB – no swelling, increased retention, excellent flow properties and pH stability• Retain and Release – easy separation of strong bases• Uniquely Selective – fast and efficient sample preparation and purification for strong bases
iris wcx
SulfonamidesSorbent: IRIS WCX - 30 mg/1mLPart Number: IR84013Solution Conc: 5 µg/mL in H2O
Recovery Rates: Sulfadiazine Sulfathiazole Sulfamerazine Sulfamethazine Run 1 98.8% Run 1 95.0% Run 1 99.9% Run 1 99.5% Run 2 102.2% Run 2 98.1% Run 2 100.5% Run 2 99.4% Run 3 98.2% Run 3 93.8% Run 3 95.6% Run 3 96.5%
151375
Time (min)
mA
U
2
4
10
8
6
12
3 9 11
Sulfadiazine
Sulfathiazole
Sulfamerazine
Sulfamethazine
Sulfadiazine
Sulfathiazole
Sulfamerazine
Sulfamethazine
0
16
14
18
20
H2N
O
OS
HN N
N
Sample Preparation
54 info@chrom4.com :: www.chrom4.com
iris max MAX
• Quaternary amine on DVB phase
• Pore size: 80 Å
• Ion-Exchange capacity: ~0.1 meq/g
• pKa >18
• Available in 25-35 µm particle size
• Available in various cartridge sizes and 96-well plate formats
IRIS MAX is a water-wettable quaternary amine divinylbenzene polymer phase designed for both anion-exchange
and reversed-phase extraction. As a result of its bifunctionality, IRIS MAX produces outstanding retention for charged
and neutral compounds. It is excellent for compounds containing an organic acid or similar ionizable functional
groups. The phase is stable over the complete pH range (0-14) and can be used with nearly any solvent permitting
the use of a wide range of solvents.
Part No. Description Particle Size Qty (Box)
IR64460 IRIS MAX 10mg/1mL 25-35µm 100
IR64461 IRIS MAX 30mg/1mL 25-35µm 100
IR64462 IRIS MAX 30mg/3mL 25-35µm 100
IR64446 IRIS MAX 60mg/3mL 25-35µm 100
IR64264 IRIS MAX, 100mg/3mL 25-35µm 100
IR64445 IRIS MAX 200mg/6mL 25-35µm 30
IR64266 IRIS MAX 500mg/6mL 25-35µm 30
IRIS MAX SPE Cartridges
Part No. Description Particle Size Qty (Box)
IR96641 IRIS MAX 96-well 10mg/1mL 25-35µm 1
IR96643 IRIS MAX 96-well 30mg/1mL 25-35µm 1
IR96645 IRIS MAX 96-well 60mg/1mL 25-35µm 1
IR96647 IRIS MAX 96-well 30mg/2mL 25-35µm 1
IR96648 IRIS MAX 96-well 60mg/2mL 25-35µm 1
IRIS MAX SPE 96-well Plates
Sample Preparation
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 55
IRIS MAX APPLICATION
Features & Benefits
• Quaternary Amine Phase – allows for anion-exchange and reversed-phase separations• 100% DVB – no swelling, increased retention, excellent flow properties and pH stability• Excellent Wettability – even after drying, due to hydrophilic/hydrophobic balance
iris max
DL-TyrosineSorbent: IRIS MAX - 30 mg/1mL Part Number: IR64461 Solution Conc: 40 µg/mL in H 2 O
Recovery Rates: Run 1 92.9%
Run 2 90.8% Run 3 93.1%
DL-Tyrosine
6 842
Time (min)
mA
U
0
0 10 12 14
2
6
8
4
10
12
NH2O
O
OH
Sample Preparation
56 info@chrom4.com :: www.chrom4.com
IRIS WAX is a mixed-mode weak anion-exchange divinylbenzene polymer phase, designed to retain and release
strong acids such as sulfates. Depending on the requirements of the application, this phase can be used in the
neutral or positively charged state. IRIS WAX displays both anion-exchange and reversed-phase behavior, which
promotes excellent retention over a wide range of hydrophilicity for both acidic, when phase is positively charged,
and neutral compounds.
• Secondary amine on DVB phase
• Pore size: 80 Å
• Ion-Exchange capacity: ~1 meq/g
• pKa ~7
• Available in 25-35 µm particle size
• Available in various cartridge sizes and 96-well plate formats
WAX
iris wax
Part No. Description Particle Size Qty (Box)
IR86011 IRIS WAX 10mg/1mL 25-35µm 100
IR86012 IRIS WAX 30mg/1mL 25-35µm 100
IR97516 IRIS WAX 30mg/3mL 25-35µm 100
IR86015 IRIS WAX 60mg/3mL 25-35µm 100
IR86018 IRIS WAX 200mg/6mL 25-35µm 30
IR86019 IRIS WAX 500mg/6mL 25-35µm 30
IRIS WAX SPE Cartridges
Part No. Description Particle Size Qty (Box)
IR97508 IRIS WAX 96-well 10mg/1mL 25-35µm 1
IR97510 IRIS WAX 96-well 30mg/1mL 25-35µm 1
IR97512 IRIS WAX 96-well 60mg/1mL 25-35µm 1
IR97514 IRIS WAX 96-well 30mg/2mL 25-35µm 1
IR97515 IRIS WAX 96-well 60mg/2mL 25-35µm 1
IRIS WAX SPE 96-well Plates
Sample Preparation
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 57
IRIS WAX APPLICATION
Features & Benefits
• Secondary Amine Phase – allows for tunable selectivity for strong acids • 100% DVB – no swelling, increased retention, excellent flow properties and pH stability• Excellent Retention – bifunctional with reversed-phase and anion-exchange behavior• Uniquely Selective – fast and efficient sample preparation and purification for strong acids
iris wax
Nitro-L-Tyrosine, Iodo-L-Tyrosine, N-Acetyl-L-TyrosineSorbent: IRIS WAX - 30 mg/1mL
Part Number: IR86012Solution Conc: 10 µg/mL in H2O
Recovery Rates: Nitro-L-Tryosine Iodo-L-Tyrosine N-Acetyl-L-Tyrosine Run 1 96.7% Run 1 94.8% Run 1 99.1% Run 2 98.0% Run 2 98.8% Run 2 102.6% Run 3 98.2% Run 3 95.0% Run 3 103.6%
20155
Time (min)
mA
U
10
Nitro-L-Tyrosine
Iodo-L-Tyrosine
N-Acetyl-L-Tyrosine
Nitro-L-Tyrosine Iodo-L-Tyrosine
N-Acetyl-L-Tyrosine4
-1
9
19
14
24
25 30
HNHO
O
O
OH
NH2HO
O2NO
OH
HO
IO
OHNH2H
Sample Preparation
58 info@chrom4.com :: www.chrom4.com
Applications - EnvironmentalPolycyclic aromatic hydrocarbons - PAH
Sorbent: IRIS PLUS - 200 mg/6mLPart Number: IR34445Solution Conc: 10 µg/mL in H2O
Recovery Rates:
Sorbent: IRIS N - 30 mg/1mLPart Number: IR44461Solution Conc: 1, 1, 5, 10 µg/mL in H2O
Recovery Rates: Carbaryl Atrazine Methiocarb Alachlor Run 1 102.0% Run 1 98.0% Run 1 101.4% Run 1 98.0% Run 2 100.1% Run 2 101.1% Run 2 101.0% Run 2 101.1% Run 3 99.9% Run 3 102.2% Run 3 99.6% Run 3 102.2%
ChryseneBenzo(a) Anthracene
104.8%
Benzo(b)FluorantheneBenzo(j)FluorantheneBenzo(k)Fluoranthene
106.5%
Benzo(a)pyreneBenzo(e)pyrene
106.5%
Indeno(1,2,3-cd)pyreneBenzo(g,h,i)peryleneDibenz(a,h)anthracene
98.7%
Figure 1: GCMS Chromatogram
Group 1
Group 2
Group 3
Group 4
Figure 1: GCMS Chromatogram
Carbaryl, Atrazine, Methiocarb, Alachlor
Carbaryl
Atrazine
Methiocarb
Alachlor
8585
UA
m
-1
4
9
29
39
4 9 11
Carbaryl
Atrazine
Methiocarb
Alachlor
3 6 10 12
14
19
24
34NHO
O
CI CH2 CH3N
N
N
H CH CH3
CH3
N
N
H
CI CH3
CH3H3C
O
ON
HN O
O OS
Sample Preparation
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 59
Applications - EnvironmentalSorbent: IRIS WCX - 30 mg/1mLPart Number: IR84013Solution Conc: 10 µg/mL in H2O
Recovery Rates: Run 1 92.4% Run 2 92.7% Run 3 85.8%
Note: The peak area values for Diquat were found to change over time. There was a relatively quick change to lower area values that then
somewhat leveled off. The area values used for quantitation were for injections of the standards and the SPE solutions in this semi-stable time
frame. This observed change in peak area over time is consistent with references that state the need to deactivate glassware prior to Diquat
solution contact. In this analysis the SPE Diquat solution comes in contact with three different glass vessels. Diquat is not retained by the
chromatographic column, eluting in the void volume. However, the strong absorbance at 310nm allows for quantitation without interference.
Diquat Dibromide
2,3 Dihydroxynaphthalene
Diquat Dibromide
6
Time (min)
UA
m
20
30
45
40
0
35
25
10
0
5
15
50
Sorbent: IRIS MCX - 30 mg/1mLPart Number: IR54461Solution Conc: 10 µg/mL in H2O
Recovery Rates: Run 1 109.5%
Run 2 103.0% Run 3 101.6%
2,3 Dihydroxynaphthalene
12119764
Time (min)
mA
U
105 8
0
40
100
80
120
3
3 41 2 5
N+
N+
Br
Br
OH
OH
Sample Preparation
60 info@chrom4.com :: www.chrom4.com
Applications - Food & AgricultureSorbent: IRIS MCX - 200 mg/6mLPart Number: IR54445 Solution Conc: 1 mg/mL in H2O
Recovery Rates: Melamine
97%
Melamine
Thiamphenicol, Florfenicol, Chloramphenicol
Melamine
Internal Standard
Sorbent: IRIS N - 30 mg/1mLPart Number: IR44461Solution Conc: 5 µg/mL in H2O
Recovery Rates: Thiamphenicol Florfenicol Chloramphenicol Run 1 98.4% Run 1 99.1% Run 1 99.3% Run 2 99.7% Run 2 101.1% Run 2 100.3% Run 3 99.2% Run 3 100.4% Run 3 99.8%
Note 1: Elution from the IRIS N SPE cartridge was performed with 70% CH3CN. While 100% CH3CN appeared to fully elute the compounds, the chromatographic peak shape was significantly better
when the SPE elution solvent was less than 100% CH3CN. 70% was used because it was already prepared, lower CH3CN may lead to more improvement in chromatographic peak shape.
Florfenicol
Thiamphenicol
Chloramphenicol
1275
Time (min)
mA
U
5
10
25
30
9 11
Thiamphenicol
Florfenicol
35
Chloramphenicol
15
20
0
4 6 8 103
OH OH
C
CO
HNNO
O
OH CI
CIOO
OS HO
HN
Sample Preparation
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 61
Applications - Food & AgricultureCarbendazim, ThiabendazoleSorbent: IRIS MCX - 30 mg/1mL
Part Number: IR54461Solution Conc: 5 µg/mL in H2O
Recovery Rates: Carbendazim Thiabendazole Run 1 101.7% Run 1 99.1% Run 2 102.0% Run 2 100.1% Run 3 100.2% Run 3 98.0%
Thiabendazole
Carbendazim
Time (min)
mA
U
-1
4
19
4 6
Carbendazim
Thiabendazole
14
9
8 10 1220
29
24
34
SulfonamidesSorbent: IRIS WCX - 30 mg/1mLPart Number: IR84013Solution Conc: 5 µg/mL in H2O
Recovery Rates: Sulfadiazine Sulfathiazole Sulfamerazine Sulfamethazine Run 1 98.8% Run 1 95.0% Run 1 99.9% Run 1 99.5% Run 2 102.2% Run 2 98.1% Run 2 100.5% Run 2 99.4% Run 3 98.2% Run 3 93.8% Run 3 95.6% Run 3 96.5%
151375
Time (min)
mA
U
2
4
10
8
6
12
3 9 11
Sulfadiazine
Sulfathiazole
Sulfamerazine
Sulfamethazine
Sulfadiazine
Sulfathiazole
Sulfamerazine
Sulfamethazine
0
16
14
18
20
H2N
N
N
HNO
OS
Sample Preparation
62 info@chrom4.com :: www.chrom4.com
Applications - Clinical & Bioanalysis
OH3CO
N
O
Hydrocodone
O
CH3
O
H
HO
H
N
Methylmorphine (Codeine)
O
HO
HO
H
N
Morphine
O
O
HO
H
N
Dihydrocodeine
OHOO CH3
O
H
N
6-acetylmorphine
O
HO
O
OH
N
Oxymorphone
Hydrocodone ISTD
Morphine ISTD
Oxymorphone Morphine
Dihydrocodeine
Hydrocodone
Oxycodone
Hydromorphone
6-acetylmophine
Codeine
Sorbent: IRIS MCX 200 mg/6mLPart Number: IR54445Solution Conc: 5 µg/mL in H2O
Recovery Rates: Hydrocodone 95% Dihydrocodeine 91% Methylmorphine (Codeine) 94% Oxycodone 104% Hydromorphone 93% Morphine 87% Oxymorphone 94%
Opiates
Antipsychotic DrugsSorbent: IRIS N - 30 mg/1mLPart Number: IR44461Solution Conc: 25 µg/mL in H2O
Recovery Rates: Risperidone 100% Quitiapine Fumerate 103% Domperidone 103%
Risperidone
Quetiapine Fumarate Domperidone
Sample Preparation
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 63
Applications - Clinical & BioanalysisPrednisone, Methylprednisolone,
Dexamethasone
Warfarin, Carbamazapine, Diphenhydramine
1917151375
Time (min)
UA
m
0
2
4
10
8
6
12
3 9 11
Prednisone
Methylprednisolone
14
Dexamethasone
Methylprednisolone
Prednisone
Dexamethasone
Sorbent: IRIS N - 30 mg/1mLPart Number: IR44461Solution Conc: 6 µg/mL in H2O
Recovery Rates: Prednisone Methylprednisolone Dexamethasone Run 1 100.7% Run 1 97.7% Run 1 100.0%
Run 2 99.5% Run 2 98.3% Run 2 98.0%Run 3 99.8% Run 3 99.9% Run 3 99.3%
Sorbent: IRIS N - 30 mg/1mLPart Number: IR44461Solution Conc: Warfarin (2 µg/mL), Carbamazapine (1 µg/mL), Diphenhydramine (5 µg/mL) in H2O
Recovery Rates: Warfarin Carbamazapine Diphenhydramine Run 1 93.8% Run 1 97.5% Run 1 100.4% Run 2 95.8% Run 2 98.0% Run 2 104.1% Run 3 94.2% Run 3 99.2% Run 3 106.1%
Warfarin
75
Time (min)
UA
m
10
30
4
Warfarin
Carbamazapine
100
Diphenhydramine
20
0
3 6 8
40
50
60
70
80
90
2
Note: Elution of the hormones from the IRIS N SPE cartridge was performed with 60% CH3CN. It was found that lower recoveries were obtained when using 100% CH3CN.
Diphenhydramine
ON
CH3
CH3
Carbamazapine
N
O NH2
O
O
OHO
O
O
OHHO
HOH
H
H
H
F
H3C
H3CCH3
OHHO
H
HH
O
CH3
CH3
CH3
CH20H
CO
HO OH
HH
H
O
O
O
O
LC Columns
64 info@chrom4.com :: www.chrom4.com
PARTISPHERE® CARTRIDGE SYSTEM
• Void-sealing cartridge system• Convenient and easy to use• Hand tightened fittings
PartiSphere® silica is manufactured by Hichrom Ltd. The material is only readily available in the PartiSphere cartridge system.
PartiSphere Phases Functional Group Particle
shapeParticle Size
(µm)Pore Size
(Å)Surface Area
(m2/g)Carbon Load
(%)
C8 Octyl Spherical 5 120 160 6C18 Octadecyl Spherical 5 120 160 11SAX Quaternary Ammonium Spherical 5 120 160 -SCX Benezenesulphonic Acid Spherical 5 120 160 -
Further PartiSphere® materials are available.
Void-sealing cartridge systemThe system is characterized by a void-sealing mechanism. If a void eventually occurs at the top of the column bed, a simple tightening of the locking head will move the cone-sealing cylinder and frit downwards until it creates the zero-void configuration of the original cartridge. Large knurled end fittings allow ready hand-tightening of the system.
PartiSphere guard cartridge systemAdditional installation of the guard cartridge holder (WH4631-0003)allowsuseofguardcartridges(Figure1).
Figure 1. PartiSphere cartridge system
End fittings (WH4631-0001)
Guard cartridge holder (WH4631-0003)
PartiSphere Phase Catalogue No.
125 x 4.6mm replacement cartridge (1/pk)C8 WH4621-0503C18 WH4621-0502SAX WH4621-0505SCX WH4621-0507250 x 4.6mm replacement cartridge (1/pk)C18 WH4621-1502SAX WH4621-1505SCX WH4621-1507AccessoriesSpare end fitting WH4631-1001
PartiSphere Phase Catalogue No.
Replacement guard cartridges (5/pk)Reversed-phase WH4641-0002Anion exchange WH4641-0005Cation exchange WH4641-0007Accessories for guard cartridgesGuard Cartridge Holder (1/pk) WH4631-1003
Ordering Information - Cartridges
Analytical cartridges Guard cartridges
LC Columns
info@chrom4.com :: www.chrom4.com 65
PARTISIL® ISO 9001:2000ISO 14001:2004
• Irregular porous silica• 5 and 10µm particle sizes• Hichrom high efficiency
Partisil®, manufactured by Hichrom Ltd., was one of the first commercially available irregular silicas. A large surface area gives it a high loading capacity.
Partisil® ion-exchange materials are still widely used today.
Partisil® Phases Functional Group Endcapped Particle Size
(µm)Pore Size
(Å)Surface Area
(m2/g)Carbon Load
(%)
Silica Octyl - 5,10 85 350 -C8 Octadecyl Yes 5,10 85 350 9ODS Octadecyl No 10 85 350 5ODS2 Octadecyl Yes 10 85 350 15ODS3 Octadecyl Yes 5,10 85 350 10.5PAC Amino-cyano Np 5,10 85 350 16SAX Tetramethyl Ammonium No 10 85 350 10SCX Sulphonic Acid No 10 85 350 10
1 Use with free-standing holder HI-161 and column coupler HI-081.2 Starter kits also available.
Please contact us for ordering information on column dimensions not listed
Partisil® Phase 5µm
Column Dimensions (mm) Guard Cartridges1
(For 3.2mm-4.0mm i.d. columns)50 x 3.2 150 x 3.2 250 x 3.2 50 x 4.6 150 x 4.6 250 x 4.6
Silica P5-50AS P5-150AS P5-250AS P5-50A P5-150A P5-250A P5-10C5C8 P5C8-50AS P5C8-150AS P5C8-250AS P5C8-50A P5C8-150A P5C8-250A P5C8-10C5ODS P5ODS3-50AS P5ODS3-150AS P5ODS3-250AS P5ODS3-50A P5ODS3-150A P5ODS3-250A P5ODS3-10C5PAC P5PAC-50AS P5PAC-150AS P5PAC-250AS P5PAC-50A P5PAC-150A P5PAC-250A P5PAC-10C5
Partisil® Phase 10µm
Column Dimensions (mm) Guard Cartridges1
(For3.2mm-4.0mmi.d.columns)250 x 4.6Silica P10-250A P10-10C5C8 P10C8-250A P10C8-10C5ODS P10ODS-250A P10ODS-10C5ODS2 P10ODS2-250A P10ODS2-10C5ODS3 P10ODS3-250A P10ODS3-10C5PAC P10PAC-250A P10PAC-10C5SAX P10SAX-250A P10SAX-10C5SCX P10SCX-250A P10SCX-10C5
Ordering Information - Partisil® ColumnsMicrobore (1.0mm - 2.1mm ID) and analytical (4.0mm ID) columnsPlease contact us for further details of 1.0mm, 2.1mm and 4.0mm ID Partisil columns as well as Partisil original part numbers.
Medium bore (3.2mm ID) and analytical (4.6mm ID) columns
LC Columns
66 info@chrom4.com :: www.chrom4.com
ULTRASPHERE® (Hichrom)(Formerly Beckman) • Spherical porous silica• 3 and 5µm particle sizes• Specific ion-pair reversed-phase column• Widely referenced silica
Ultrasphere®, by Hichrom, is a classical silica which boasts a high performance reputation. In addition to the base silica, four phases (5μmparticlesize)areavailable instandardcolumns-UltrasphereC8,C18,cyanoandIP(ion-pair).
UltrasphereC8andC18arealsoavailableas3μmparticlesizesilicas packed into the XL High Speed Cartridge Columns.
Ultrasphere Phases Endcapped Particle Size
(µm)Pore Size
(Å)
Silica - 5 80C8 Yes 3,5 80ODS Yes 3,5 80CN No 5 80IP (C18) Yes 5 80
Ordering Information
1 Use analytical cartridge and guard cartridge in XL holder assembly US237060. Contains 3µm particle size silica.2 Contains 5µm particle size silica.
Ultrasphere Phases
XL Cartridge ColumnDimensions1 (mm)
Column Dimensions2 (mm)
Analytical Guard (2pk) Analytical Guard70 x 4.6 5 x 4.6 150 x 4.6 250 x 4.6 250 x 2.0 45 x 4.6
Silica - - US235342 US235341 US237392 US244011C8 US237501 US237521 US235333 US235332 US237396 US243532ODS US237500 US237520 US235330 US235329 US244434 US243533CN - - US244070 US244071 US237394 US244072C18 Ion-Pair (IP) - - US235334 US235335 - US243534
Batch to batch reproducibilityThe reproducibility of batches of Ultrasphere ODS is shown in Figure 1. Resultant columns have minimal selectivity differences (<5%).
Ultrasphere-XL high speed cartridge columnIn this cartridge design, the guard cartridge is directly abutted to the analytical cartridge. This integral design was one of the first of its type to minimize dead volume between the two cartridges.
Figure 1. Carbon load (%) for batches of Ultrasphere ODS
ISO 9001:2000ISO 14001:2004
LC Columns
info@chrom4.com :: www.chrom4.com 67
1)Octadecylmonolayerphasebondedtosphericalsilica particles with pore size of 100Å, a surface area of 450m2/g and a pore volume of 1.1 ml/g.2)Impurities: Al < 1ppm, Fe < 1ppm, Ti < 1ppm, Zr < 1ppm3)Doubleboundendcapping.4)pHstabilityfrom1.5to10,becauseof the unique stable endcapping.5)Excellentpeaksymmetryeven with strong bases
ReproSil®- Pur Basic & ReproSil® Gold (Maisch)
• Porous spherical silica• Specifically designed for pharmaceutical and biotechnical separations• Fully validated columns• Ideal for LC-MS • Excellent reproducibility
ReproSil Phases
Particle Size (µm)
Pore Size (Å)
Surface Area (m2/g)
Carbon Load (%) Endcapping
Reprosil-Pur Basic C18 1.8, 2, 3, 5, 10 100 450 17 BidentateReprosil-Pur Basic C18-HD 3, 5, 10 100 450 25 BidentateReprosil-Pur Basic C8 3, 5, 10 100 450 15 BidentateReprosil-Pur Basic C8-2 3, 5, 10 100 450 12 Bidentate
Reprosil Gold C18 3, 5, 10 120 320 20 BidentateReprosil Gold 200 C18 5, 10 200 180 14 BidentateReprosil Gold 300 C18 5, 10 300 120 8 Bidentate
Reprosil Gold C8 3, 5, 10 120 320 12 BidentateReprosil Gold 200 C8 5, 10 200 180 8 BidentateReprosil Gold 300 C8 5, 10 300 120 5 Bidentate
Reprosil Gold C4 3, 5, 10 120 320 8 BidentateReprosil Gold 200 C4 5, 10 200 180 5 BidentateReprosil Gold 300 C4 5, 10 300 120 3 Bidentate
Features of Reprosil®-Pur and Reprosil® Gold - the high purity phases (99.999%)
Comparison - C18 Phases
Reprosil®-Pur Basic-C18
High Speed HPLC- Reprosil® Gold
Please contact us for ordering information
LC Accessories
68 info@chrom4.com :: www.chrom4.com
Ordering Information - Pump Replacement Parts
REPLACEMENT PARTS - AGILENT™ Compatible 1200/1100/1050
For replacement Electron Multipliers, please visit chrom4.com
Check cleanliness of flow cell every 6 months
Ordering Information - Lamps
D2 Lamp comparison test data
Instrument: Agilent MWD G1365DD2 lamp: Agilent Chrom4 CL4-AgDADLLSelf test mode: Single
Test items RequirementAgilent Chrom4
Data measured Result Data measured Result
Min. intensity (190nm - 220nm) > 2000 cts 9062 cts passed 10944 cts passed
Min. intensity (221nm - 350nm) > 5000 cts 16416 cts passed 18960 cts passed
Min. intensity (351nm - 500nm) > 2000 cts 10508 cts passed 11426 cts passed
Min. intensity (501nm - 950nm) > 4000 cts 10035 cts passed 9709 cts passed
Max. intensity (190nm - 350nm) < 450000 cts 50824 cts passed 65979 cts passed
Max. intensity (700nm - 950nm) < 300000 cts 40411 cts passed 39539 cts passed
Max. intensity (D2 alpha line) < 1200000 cts 98459 cts passed 107132 cts passed
Wavelength at 486.0nm 485.5 ~486.5 nm 485.94 nm passed 485.76 nm passed
Wavelength at 656.1nm 655.6 ~656.6 nm 656.07 nm passed 655.94 nm passed
Holmium test -1 ~ 1 nm 0.30 nm passed 0.40 nm passed
Spectral flatness < 0.002 AU 0.0000 AU passed 0.0000AU passed
ASTM noise (20 min. at 254nm) ≤ 0.02 mAU 0.0124 mAU passed 0.0115 mAU passed
Pump Replacement Parts
Replacement Part Number
OEM Part
Typical Maintenance Schedule
PTFE Frits for model 1200/1100/1050 5/pack CHR07-000-5 01018-22707 Change every 6 monthsPiston Seal, UHMW-PE for model 1200/1100/1050 - pk 10 CHR01-000-10 0905-1420 Change every 6 monthsPiston Seal, UHMW-PE for model 1200/1100/1050 - each CHR01-000 0905-1420 Change every 6 monthsPiston Seal, Black PTFE for model 1200/1100/1050 - pk 10 CHR01-200-10 5063-6589 Change every 6 monthsPiston Seal, Black PTFE for model 1200/1100/1050 - each CHR01-200 5063-6589 Change every 6 monthsUHMW PE Plunger Wash Seal for models 1200/1100/1050 CHR01-002-10 n/a Change every 6 monthsBlack PTFE Based Plunger Wash Seal for models 1200/1100 CHR01-202-10 n/a Change every 6 monthsReplacement Piston for model 1200/1100/1050 CHR02-000 5063-6586 Change every 6 monthsOutlet Check Valve Assembly for model (Quaternary&Isocratic)1200/1100/1050
AS-250-1417 G1311-60012 Change every 6 months
Oulet Check Valve cartridge only for model 1200/1100/1050 AS-250-1397 n/a Change every 6 monthsOutlet Check Valve Assembly (Binary Pump)for1200/1100/1050(400bar)
AS-250-1496 G1312-60012 Change every 6 months
Sieves, Outlet Valve 10/pk for model 1200/1100 CHR07-001-10 5063-6505 Change every 6 monthsActive Inlet Cartridge(400bar)formodel1200/1100/1050 AS-250-2300 5062-8562 Change every 6 months
Deuterium Lamps
Replacement Part Number
OEM Part
Typical Maintenance Schedule
VWD UV Lamp / 2000hr, Agilent models 1200, 1100, G1314 CL4-1314 G1314-60100 Change every 2000 hrs or 6 months, whatever comes firstDiode Array Lamp / 2000hr, Agilent 1200, 1100, G1315A, G1365A CL4-AgDADLL 5182-1530
LC Accessories
info@chrom4.com :: www.chrom4.com 69info@chrom4.com :: www.chrom4.com
REPLACEMENT PARTS - SHIMADZU
For replacement Electron Multipliers, please visit chrom4.com
Ordering Information - Pump Replacement Parts
D2 Lamp comparison test data
Instrument: Shimadzu LC SPD-10AvpD2 lamp: Shimadzu 228-34016-02 Chrom4 CL4-SPD10-20
Test items RequirementShimadzu Chrom4
Data measured (Ref.)
Result Data measured (Ref.)
Result
Intensity at 220.0nm > 800 cts 1459 cts passed 1628 cts passed
1 h. drift ave. (1 h at 250.0nm) < 3 x 10-4 Au/HR 1.1 x 10-4 Au passed 1.1 x 10-4 Au passed
10 min. noise ave. (10 min. at 250.0nm) < 1 x 10-5 Au 0.57 x 10-5 Au passed 0.57 x 10-5 Au passed
Ordering Information - Lamps
Deuterium Lamps
Replacement Part Number
OEM Part
Typical Maintenance Schedule
Deuterium Lamp, SPD-10, SPD-10AS, SPD-10AV, SPD-10Avp, SPD-20
CL4-SPD10-20 228-34016-02 Change every 2000 hrs or 6 months, whatever comes first
Deuterium Lamp, SPD-20A LS-00136PL 228-34016-00
Pump Replacement Parts
Replacement Part Number
OEM Part Qty
Piston Seal-UHMW-PE for models LC-600, LC-9A, LC-10AD, LC-10ADVP, LC 2010, LC-20AB, LC-20AD
CHR01-060 228-35146-00 each
Piston Seal-UHMW-PE for models LC-600, LC-9A, LC-10AD, LC-10ADVP, LC 2010, LC-20AB, LC-20AD
CHR01-060-10 228-35146-00 \10
Piston Seal-Teflon for models LC-600, LC-9A, LC-10AD, LC-10ADVP, LC-2010, LC-20AB, LC-20AD
CHR01-260 228-35146-00 each
Piston Seal-Teflon for models LC-600, LC-9A, LC-10AD, LC-10ADVP, LC-2010, LC-20AB, LC-20AD
CHR01-260-10 228-35146-00 \10
Piston for models LC-600, LC-9A, LC-10AD, LC-20AB CHR02-060 228-18523-91 eachPiston for models LC-10ADVP, LC-20AD CHR02-061 228-35601-91 eachInlet Check valve assembly for models LC-600, LC-9A, LC-10AD, LC-20AB AS-250-1480 228-18522-91 eachInlet Cartridge for models LC-600, LC-9A, LC-10AD, LC-20AB AS-250-1460 n/a eachOutlet Check Valve assembly for models LC-600, LC-9A, LC-10AD, LC-20AB AS-250-1485 228-18522-92 eachOutlet Cartridge for models LC-600, LC-9A, LC-10AD, LC-20AB AS-250-1465 n/a eachInlet Cartridge assembly for models LC-10ADVP, LC-20AD AS-250-1481 228-390939-92/228-45704-91 eachInlet Cartridge for models LC-10ADVP, LC-20AD AS-250-1461 n/a eachOutlet Cartridge assembly for models LC-10ADVP, LC-20AD AS-250-1486 228-34976-91/228-45705-91 eachOutlet Cartridge for models LC-10ADVP. LC-20AD AS-250-1466 n/a each
LC Accessories
70 info@chrom4.com :: www.chrom4.com
REPLACEMENT PARTS - WATERS
Ordering Information - PM Kits
D2 Lamp comparison test data
Instrument: Waters LC 996D2 lamp: Waters WAT052586 Chrom4 CL4-996-2996
Test itemsWaters Chrom4
Data measured Result Data measured Result
Intensity at 230nm 43900 cts passed 52500 cts passed
Intensity at 240nm 42800 cts passed 47700 cts passed
Intensity at 250nm 35000 cts passed 37800 cts passed
Intensity at 260nm 26200 cts passed 29000 cts passed
Intensity at 270nm 21100 cts passed 22800 cts passed
Intensity at 280nm 18300 cts passed 19400 cts passed
Intensity at 290nm 18100 cts passed 19500 cts passed
Intensity at 254.0nm 34978 cts passed 35023 cts passed
10 min. drift ave. (10 min. at 254.0nm) 0.152 mAU passed 0.163 mAU passed
10 min. noise ave. (10 min. at 254.0nm) 0.0334 mAU passed 0.0326 mAU passed
Replacement parts also available for Dionex, Hitachi, Gilson/Rainin, SSI and VarianPlease contact us for part number and ordering information.
PM Kits
Replacement Part Number
OEM Part Qty
Pump PM Starter Kit for model 600, includes 2 Piston Seals, 2 Inlet CV, 2 Oulet CV, 2 Pistons, 4 SST Solvent Filters
AS-270-0755 WAT052675 each
Pump PM Kit Alliance 2690/95, includes: 2 Piston Seals, 4 Pump Head Face Seals, 2 Inlet/Oulet Cartridges, 2 Pistons, 4SST Solvent Filters
AS-270-0944 WAT270944 each
Ordering Information - Lamps
Deuterium Lamps
Replacement Part Number
OEM Part
Typical Maintenance Schedule
Deuterium Lamp, Model 996, 2996 CL4-996-2996 WAT052586 Change every 2000 hrs or 6 months, whatever comes firstDeuterium Lamp, Model 2487, 2488 CL4-2487-2488 WAS081142
LC Accessories
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 71
REPLACEMENT PARTS - WATERS
Ordering Information - Pump Replacement Parts
Pump Replacement Parts
Replacement Part Number
OEM Part Qty
Inlet Check Valve Assembly for models M45, 45G, 510, 515, 590, 1515, 1525(Analytical), 6000, 6000A, LCM1
AS-250-1120 WAT033679/ 700000253 each
Outlet Check Valve Assembly w/Adapter Seal for models M45, 45G, 510, 515, 590, 1515, 1525 (Analytical), 6000, 6000A, LCM1
AS-250-1125 WAT025216/ 700000253 each
Adapter Seal fo Outlet CV for models M45, 45G, 510, 515, 590, 1515, 1525 (Analytical), 6000, 6000A, LCM1
AS-250-1135-5 n/a \5
Inlet Check Valve Assembly for models M501, 600, 600E, 610 AS-250-1020 WAT033679/ 700000253 eachOutlet Check Valve Assembly for models M501, 600, 600E, 610 AS-250-1127 WAT025216/ 700000253 eachAdaptor Seal for Outlet CV models M501, 600, 600E, 610 AS-250-1137-5 n/a \5Inlet/Outlet Check PEEK cartridges for models 2690/95, 2790/95/96,Direct replacement
AS-250-1070 WAT270941 each
Piston Seal - UHMW-PE for models M45, 45G, 501, 510, 515, 590, 600, 600E, 610, 1515, 1525 (analytical), 6000, 6000A, LCM1
CHR01-090 WAT022934/ WAT022946 each
Piston Seals - UHMW-PE for models M45, 45G, 501, 510, 515, 590, 600, 600E, 610, 1515, 1525 (analytical), 6000, 6000A, LCM1
CHR01-090-10 WAT022934/ WAT022946 \10
Piston Seal - Teflon for models M45, 45G, 501, 510, 515, 590, 600, 600E, 610, 1515, 1525 (analytical), 6000, 6000A, LCM1
CHR01-290 WAT026613 each
Piston Seal - Teflon for models M45, 45G, 501, 510, 515, 590, 600, 600E, 610, 1515, 1525 (analytical), 6000, 6000A, LCM1
CHR01-290-10 WAT026613 \10
Piston Seal - UHME-PE for models Alliance 2690/95, 2790/95/96 AS-200-0210 WAT270938 eachPiston Seals - UHME-PE for models Alliance 2690/95, 2790/95/96 AS-200-0215 WAT270938 \10Seal Wash Piston Seal - UHMW-PE for models Alliance 2690/95, 2790/95/96 AS-200-0220 WAT271018 eachSeal Wash Piston Seals - UHMW-PE for models Alliance 2690/95, 2790/95/96 AS-200-0225 WAT271018 \10Seal Wash Face Seal - UHMW-PE for models Alliance 2690/95, 2790/95/96 AS-200-0230 WAT271017 eachWash Tube Seal- UHMW-PE for models Alliance 2690/95, 2790/95/96 AS-200-0240 WAT270940 eachPump Head Face Seal-UHMW-PE for models Alliance 2690/95, 2790/95/96 AS-200-0250 WAT270939 eachHead Plunger Seal for models Acquity, nanoAcquity CHR01-091 700002599 \2Wash Seal for models Acquity, nanoAcquity CHR01-092 700002598 \2SS Solvent Filter for models Acquity, nanoAcquity CHR07-023 700003616 \7Piston with Sapphire Rod for models M45, 45G, 501 CHR02-091 WAT026524 eachPiston with Sapphire Rod for models M510, 515, 590, 600, 610, 1515, 1525 (analytical),6000, 6000A, LCM1
CHR02-092 WAT025656 each
Piston with Sapphire Rod for models Alliance 2690/95, 2790/95/96 CHR02-093 WAT270959 eachPrimary Check Valve Assembly, Acquity UPLC AS-250-1497 WAT700002596 eachAcquity Intelligent Valve Assembly AS-250-1498 WAT700003563 eachCheck Valve Double Ball & Seat, Acquity UPLC AS-250-1499 WAT700005164 each
LC Accessories
72 info@chrom4.com :: www.chrom4.com
Pumps
ASI HPLC Pumps
• Self-priming pump head requires no manual priming
• Patented “Floating Pump Seal” design forextended seal wear
• Available with micro, analytical, semi-prep andprep pump heads
• UHPLC versions for pressures up to 15,000 psi
• Programmable solvent compressibility compensation
• Easy maintenance and service for all wetted parts
• Integral prime/purge assembly for quicksolvent change
The ASI HPLC pump is designed with the chromatographer in mind. It can be used as a reliable low cost isocratic pump or integrated into a gradient HPLC System. In either case, the pump incorporates several key features which make it truly one of a kind in the world of HPLC Pumps.
Isocratic Model 501
The Model 501 is a high performance, compact solvent delivery module that has been designed to compete with the most expensive pump systems on the market in reliability and performance without the high cost. A dual piston design with solvent compressibility feedback assures virtually pulse-free and accurate solvent delivery. The Model 501 has all of the features of the Model 500, but without gradient programming capability. It may be used as an economical stand alone pump for isocratic operation, or in conjunction with a Model 500 for gradient opera tion.
Model 500
The Model 500 has been designed to convert the Model 501from an isocratic pump to a gradient HPLC system. Full operation and gradient control programming is achieved through the keypad on the front panel of the Model 500. The Model 500 includes a high pressure integral static mixer, connecting tubing, and all the accessories necessary to quickly convert the Model 501 to gradient operation.
Model 500G
The Model 500G is a complete high pressure gradient HPLC system. The system includes one Model 501, one Model 500, and all necessary electrical and plumbing connections.
Pump Head Flow Rate Range Pressure Rating
Micro Head 0.5 µL/min. to 4 mL/min 6,000 PSI MaxAnalytical Head 1.0 µL/min. to 10 mL/min 6,000 PSI MaxSemi-Prep Head 0.050 mL/min. to 20 mL/min 2,500 PSI MaxPrep Head 0.100 mL/min. to 80 mL/min 1,000 PSI Max
Isocratic Model 501 Gradient System 500G
HPLC PumpsPart No. Description
AS-501-0002* Model 501, Micro Head, StandardAS-501-0002HP* Model 501, Micro Head, High PressureAS-501-0000* Model 501, Analytical Head, StandardAS-501-0020* Model 501, Semi Prep Head, StandardAS-501-0040* Model 501, Prep Head, StandardAS-500G-0000* Gradient System, Analytical HeadAS-500G-0002* Gradient System, Micro HeadAS-500G-0002HP* Gradient System, Micro Head, High PressureAS-500G-0020* Gradient System, Semi-Prep HeadAS-500G-0040* Gradient System, Prep Head
* Please specify your local required line voltage for the above items
Replacement Pump Head AssembliesPart No. Description
AS-A500-1000 Spring Housing w/ Micro 2mL Pump Head Assembly
AS-A500-1001 Spring Housing w/ Analytical 10mL Pump Head Assembly
AS-A500-1002 Spring Housing w/ Semi-Prep 20mL Pump Head Assembly
AS-A500-1003
Replacement Check Valves
Spring Housing w/ Prep 80mL Pump Head Assembly
Part No. DescriptionAS-A500-1133 2mL Pump Head Inlet/Outlet Check Valve Cartridge
AS-A500-1050 10mL Pump Head Inlet/Outlet Check Valve Cartridge,20mL and 80mL Pump Head Outlet Check Valve Cartridge
AS-A500-1060 20mL and 80mL Pump Head Inlet Check Valve Cartridge
Replacement Piston SealsPart No. Description
AS-A500-1009-U-2 2mL Pump Head Piston Seal Assembly, UHMW /2pkAS-A500-1009-U-10 2mL Pump Head Piston Seal Assembly, UHMW /10pkAS-A500-1006-T-2 10mL Pump Head Piston Seal Assembly, Teflon /2pkAS-A500-1006-T-10 10mL Pump Head Piston Seal Assembly, Teflon /10pkAS-A500-1006-U-2 10mL Pump Head Piston Seal Assembly, UHMW /2pkAS-A500-1006-U-10 10mL Pump Head Piston Seal Assembly, UHMW /10pkAS-A500-1026-U-2 20mL Pump Head Piston Seal Assembly, UHMW /2pkAS-A500-1026-U-10 20mL Pump Head Piston Seal Assembly, UHMW /10pk
Replacement PistonPart No. Description
AS-A500-1117 2mL Pump Head Piston Assembly, CeramicAS-A500-1116 10mL Pump Head Piston Assembly, SapphireAS-A500-1024 20mL Pump Head Piston Assembly, SapphireAS-A500-1044 80mL Pump Head Piston Assembly, Ceramic
LC Accessories
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 73
Precolumn, Inline Filters and Guard Columns
• Economical protection against micro-particles• Extends LC/UHPLC column lifetime
• Negligible effect on column performance• Universal fit
Part No. Description Qty.
AS-850-1010 UHPLC UltraShield PreColumn Filter, 0.5 micron x 0.62” dia. SST Frit eachAS-850-1020-062 Direct Connect Column Filter, 0.5 micron x 0.62” dia. SST Frit eachAS-850-1025-062 In-Line Column Filter, 0.5 micron x 0.62” dia. SST Frit eachAS-850-1025 In-Line Column Filter, 0.5 micron x 0.125” dia. SST Frit eachAS-850-1025-188 In-Line Column Filter, 0.5 micron x 0.188” dia. SST Frit eachAS-850-1050T ColumnShieldPreColumnFilter(PEEK),0.5 micron x 0.62” dia. Titanium Frit each
Ordering Information
AS-850-1020-062
AS-850-1020-01 Replacement Filter
AS-850-1025
UltraShield Precolumn Filter
• UltraShield direct connect precolumn filters were engineered specifically for use in fast, high efficiency separations
Direct Connect Precolumn Filter • UltraShield direct connect precolumn filters were engineered specifically for use in high throughput and routine LC separations.
PrimeLine In-Line Filter • PrimeLine in-line filters were engineered and designed to be used anywhere within an LC system where additional filtration is required.requiring high mobile phase velocities and ultra high pressure.
ColumnShield Precolumn Filter • ColumnSaver direct connect precolumn filters were engineered to minimize dead volume specifically for use in fast, high efficiency separations requiring high mobile phase velocities.
AS-850-1010AS-850-1050T
Precolumn and Inline Filters
• Extends column lifetime by removing contaminants and particulates• Leak free connection to most manufacturers UHPLC/HPLC columns, 2.1mm - 4.6mm ID• Pressure rated to 20,000psi (1,378bar)
• Re-usable holder• Cartridges packed with
media for maximum column protection• Simple, quick and easy removal and replacement
of disposable cartridge
Part No. Description Qty.
AS-850-1390-3HH Guard Column Housing, 5mm long eachAS-850-1392-04 Guard Column Cartridge, 2mm x 5mm long, packed /5
Quick&Easy Guard Column Housing and Cartridge
Ordering Information
info@chrom4.com :: www.chrom4.com
LC Accessories
74 info@chrom4.com :: www.chrom4.com
Flow Splitters and Mixers
HyperShear™ LC and UHPLC Mixers
Biocompatible PEEK also available (Low flow,analyticalflow&highflowonly).
Complete assemblies available. Please enquire.
Comparison data available HyperShear™ Static Mixers vs Agilent 1100 packed bed static mixer and Shimadzu LC-10ADvp. Please contact us.
Part No. Description
Adjustable Flow Splitters
AS-600-PO10-04 Adjustable Flow Splitter, Analytical Range, 0.25mL/min. to 5mL/min. Input Flow, Default Calibration Flow = 1.0mL/min., Split Ratio=5:1 to 100:1
AS-600-PO10-06 Adjustable Flow Splitter, Analytical Range, 0.25mL/min. to 5mL/min. Input Flow, Default Calibration Flow = 1.0mL/min., Split Ratio=1:1 to 20:110:1
Fixed Flow Splitters
AS-620-PO10-09 Fixed Flow Splitter, Analytical Range, 0.1mL/min. to 5mL/min. Input Flow, Default Calibration Flow = 1.0mL/min., Split Ratio=20:1
AS-620-PO10-10 Fixed Flow Splitter, Analytical Range, 0.1mL/min. to 5mL/min. Input Flow, Default Calibration Flow = 1.0mL/min., Split Ratio=10:1
AS-620-PO10-11 Fixed Flow Splitter, Analytical Range, 0.1mL/min. to 5mL/min. Input Flow, Default Calibration Flow = 1.0mL/min., Split Ratio=5:1
AS-620-PO10-12 Fixed Flow Splitter, Analytical Range, 0.1mL/min. to 5mL/min. Input Flow, Default Calibration Flow = 1.0mL/min., Split Ratio=3:1
AS-620-PO10-13 Fixed Flow Splitter, Analytical Range, 0.1mL/min. to 5mL/min. Input Flow, Default Calibration Flow = 1.0mL/min., Split Ratio=1:1
AS-620-PO10-CS Fixed Flow Splitter, Analytical Range, 0.1mL/min. to 5mL/min. Input Flow, Default Calibration Flow = 1.0mL/min., Split Ratio=Custom
Adjustable Flow Splitter
Binary Fixed and Multiport Flow Splitters* Does not come with mounting bracket - AS-620-1000
Fixed/adjustable, semi-prep/prep, multiport, post- and pre-column flow splitters available.
Replacement resistor sets also available. Please contact us.
Ordering Information - Flow Splitters
Ordering Information
Part No. Description
Micro Mixer Assemblies (0.5 μL - 25 μL) , Maximum Pressure 6,000PSIAS-402-0010 BinaryTeeMixerAssemblySS10μLAS-402-0025 BinaryTeeMixerAssemblySS25μLLow Flow Mixer Assemblies (50 μL - 250 μL)AS-411-0050 In-LineMixerAssemblySS50μLAS-411-0150 In-LineMixerAssemblySS150μLAS-411-0250 In-LineMixerAssemblySS250μLAS-412-0050 BinaryTeeMixerAssemblySS50μLAS-412-0150 BinaryTeeMixerAssemblySS150μLAS-412-0250 BinaryTeeMixerAssemblySS250μL
Analytical Mixer Assemblies (350 μL and 500 μL)AS-421-0350 In-LineMixerAssemblySS350μlAS-421-0500 In-LineMixerAssemblySS500μLAS-422-0350 BinaryTeeMixerAssemblySS350μLAS-422-0500 BinaryTeeMixerAssemblySS500μL
Dissolution Essentials
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 75info@chrom4.com :: www.chrom4.com
Quartz Spectrophotometer Cells
Ordering Information - Quartz Cells and Reference StandardsFor Agilent, Buck Scientific, Hitachi, Jasco, Shimadzu, Thermo Scientific and PerkinElmer
Quartz CellsTraceableCalibratedCertified reference material
What is calibration?Calibration is the process of establishing how the response ofa measuring device varies with respect to the instrument para-meter being measured. The usual way to perform calibrationis to measure the parameter (e.g. using a reference material)and monitor the instrument response
Why is calibration important?Place any equipment in the environment of choice, and imme-diately the chosen environment will begin to act on that equip-ment causing change and ultimately degradation in perfor-mance. This so called drift causes your results to becomeunreliable and no longer “fit for their intended purpose”. Whiledrift cannot be eliminated it can be detected and containedthrough the process of calibration. In the pharmaceuticalindustry, a system where drift has occurred to an unaccept-able level is deemed to be “out of control”.
By inference, this same environment will also act on yourCertified Reference Materials, depending on how they arestored, etc. These materials must be checked/re-certified toensure that the values on which you are depending have notalso significantly changed.
Reference materials, Spectrophotometer FluorimeterColorimeter and flow cells soon available from Chrom4!
Chrom4 Quartz Cuvettes (cells) and Glass Cells
Chrom4 manufacturing, has many years experiencein the production of accessories for UV-Vis-NIR spectroscopyto meet all standard procedures found in analytical,clinical and research laboratories, especially QA environments.
A wide range of cells specifically designed for spectrophotometers are available from path lengths
of 1mm through to 100mm.
There are three basic designs of aperture. Path lengths below1mm are measured interferometrically. The rectangular cellsare serial numbered and fully traceable.
Part No. (each) DescriptionRectangular CellsC4QC-1 1 mm UV Quartz Cell
C4QC-2 2 mm UV Quartz Cell
C4QC-5 5 mm UV Quartz Cell
C4QC-10 10 mm UV Quartz Cell
C4QC-20 20 mm UV Quartz Cell
C4QC-40 40 mm UV Quartz Cell
C4QC-50 50 mm UV Quartz Cell
C4QC-100 100 mm UV Quartz Cell
Dissolution Essentials
76 info@chrom4.com :: www.chrom4.com
Introduction to Dissolution
Dissolution Essentials -Chrom4: The Dissolution Essential SpecialistsCHROM4 fulfills the various needs of the dissolution industry by carrying a full line of consumables and accessories for various brands and models of dissolution testing machines.
CHROM4 produces the highest quality products to the entire pharmaceutical industry. All of their products are both USP and machine manufacturer compliant.
The product line consists of items specifically designed to fit the many different brands of dissolution testing equipment. Dissolution Essentials manufactures products dedicated to specific instruments, such as Distek, Sotax, VanKel and Hanson.
In this section, we have included the most common dissolution accessories.
For more product information, please browse our website and discover why CHROM4 is the superior alternative for dissolution essentials.
What can you expect from us?
• Baskets• Basket Shafts • Cannula Filters • Capsule Sinkers • Disintegration Testing • Dissolution Media• Dissolution Vessels
• Intrinsic Dissolution • Paddles • Sampling Cannula • Spin Shaft Accessories• • Tubing• USP Apparatus 3• USP Apparatus 5 & USP Apparatus 6
For more information, please contact us!www.CHROM4.com
AswellasCaleva,CaliperLifeSciences(Zymark),Electrolab, Erweka, Logan, Pharmatest and Toyama
CHROM4 is not affiliated with any of the companies listed above, or their products. Products listed under the companies above are compatible with their instrumentation.
Dissolution Essentials
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 77
Vessels and CoversVesselsSome suppliers offer “one size” generic vessels for all dissolu-tion baths, however, replacing a vessel with one not specifical-ly designed for the instrument could impair vessel centering. Also, larger or smaller vessel inside diameters can change hydrodynamics. Both variables could impact dissolution rates.
CHROM4dissolutionvesselscomplywithUSP(711)andwiththe associated original equipment manufacturers dimensional specifications. This is extremely important because the ves-sels associated with various dissolution baths are not dimen-sionally the same.
High Precision Vesselvessels provide ultimate dimensional accuracy• Sphericity less then .10mm • Spherical radius 50.03+/- 0.08mm• Cylindricity less then 0.17mm
High Precision vessels offer ultimate control of dissolution variables and assist with dissolution instrument calibration to ASTM E 2503-07 requirements.
Key Features:• Fits directly into the dissolution bath• Does not require Centering Ring • Comes standard with individual certificates• Inside bottom extremely close to true hemisphere - Sphericity• Extremely low tolerance of radius of inside bottom • Inside cylindrical body extremely close to true circle - Circularity• Agreement of both centers of cylindrical body and bottom - Concentricity• Inside cylindrical body extrmely close to true cylinder - Cylindricity• Vessel center nearly perfect vertical and guaranteed by the concentricity • Extremely low tolerance of inside diameters of cylindrical body• Extremely low vessel-to-vessel variation in configuration• ASTM, USP, BP, EP, JP and associated pharmacopeia compliant
Bath Manufacturer Model No. Description OEM Part No. (each)Hanson SR8+ Multi-Dose Centering Ring 69606 C4-HAVAR69606Distek 2100 A, B & C Plastic Centering Ring 3350-0096 C4-DKPCR
Ordering Information - High Precision Vessel
Ordering Information - Vessel Adaptor Ring
C4-DKC900PSC4-A900ASTM
Ordering Information - Dissolution Vessels and Covers
Part No. (each) Description OEMDistek
C4-DKC900PS Serialized 1000mL Premier Glass Vessel (no centering ring for use in waterlessbathdissolutionsystems) -
C4-DKC900S 1000mL Clear Glass Vessel, No Ring, Serialized 3010-0069C4-DKA900S 1000mL Amber Glass Vessel, No Ring, Serialized -C4-DKA900CRS 1000mL Amber Glass Vessel, Centered, Serialized 3010-0023C4-DKC900CRS 1000mL Clear Glass Vessel, Centered, Serialized 3010-0093C4-DKPCR Plastic Centering Ring for Distek Vessels 3350-0096C4-DKCHC Clear Hinged Cover 3250-0089 Agilent (formerly VanKel/Varian) compatibleC4-VKC900S 1000mL Clear Glass Vessel, Serialized 12-5000C4-VKA900S 1000mL Amber Glass Vessel, Serialized 12-5010C4-VKC900CRS 1000mL Clear Glass Vessel, Centered, Serialized 12-5035C4-VKA900CRS 1000mL Amber Glass Vessel, Centered, Serialized 12-5020C4-VKCCS Clear Cover w/Paddle Slot 12-6300C4-VKACS Amber Cover w/Paddle Slot 12-6320HansonC4-HAC900S 1000mL Clear Glass Vessel, Serialized 72-600-510C4-HAA900S 1000mL Amber Glass Vessel, Serialized 72-600-556SotaxC4-SXC900S 1000mL Clear Glass Vessel, Serialized 2503C4-SXA900S 1000mL Amber Glass Vessel, Serialized 2503-2
C4-C900ASTM
Part No. (each) DescriptionC4-C900ASTM ASTM High Precision VesselC4-A900ASTM ASTM Amber High Precision Vessel
C4-DKPCR
Other vessel sizes available. Wesupplydissolutionvessels&coversforotherdissolutiontesting(Caleva,Erweka,PharmatestandZymark).Pleaseenquire.
NEW Toyama VesselsNow Available
Dissolution Essentials
78 info@chrom4.com :: www.chrom4.com
Baskets, Shafts and Paddles
Baskets, Shafts and PaddlesCHROM4 offers both clip-on style and O-ring style baskets & basket shafts for most dissolution baths. Both meet the asso-ciated original equipment manufacturers dimensional specifi-cations. Both clip style and O-ring style baskets comply with USP (711) specifications. All CHROM4 baskets aremade from electropolished, sintered 316 stainless steel. The sintering process essentially creates a welded joint at each overlapping wire junction. Sintered baskets are stronger and last longer. They retain original dimensions and geometry and resist wobble. Clip-on style shafts utilize a proprietary, spring tempered clip, which retains the original gripping tension far longer than conventional shafts.
CHROM4 offers electropolished 316 stainless steel paddles.
Clip style and O-ring style shafts & paddles are precisely manufactured to limit rotational wobble to levels far below USP(711)specifications.
C4-DKBSK040
Ordering Information - Baskets, Shafts and Paddles
Other basket and basket shaft sizes and styles available. Paddles are also available in different sizes and PTFE coated or molded PTFE.Please enquire.
Part No. (each) Description OEMDistekC4-DKBSK040 40MeshBasket(USPStandardSizeMesh) 2821-0072C4-DKBSK040ES 40MeshBasket(USPStandardSizeMesh),EvolutionSeries 2800-0032C4-DKBSPOS 16.5” Basket Shaft, 316 SS, O-Ring/Push On Style 2821-0074C4-DKBSSCS 16.5” Basket Shaft, 316 SS, Spring Clip Style -C4-DKDS 16.5” Detachable Shaft, 316 SS 2800-0165C4-DKBAES Basket Adapter for Evolution Series Only 3200-0038C4-DKBCES Basket Clip for Evolution Series Only 3100-0017C4-DKPDE 16.5” Paddle, 316 SS, Electropolished 2800-0010 Agilent (formerly VanKel/Varian) CompatibleC4-VKBSK040 40MeshBasket(USPStandardSizeMesh) 12-2100C4-VKBSKPL040 40MeshPrecisionLengthBasket(USPStandardSizeMesh) -C4-VKBSSCSV 14.5” Basket Shaft, 316 SS, Spring Clip Style for V-Series 12-2073C4-VKBSSCS 15” Basket Shaft, 316 SS, Spring Clip Style 12-2070C4-VKBSCPOS 15” Conical Basket Shaft, 316 SS, O-Ring/Push On Style 12-2050C4-VKPDEV 14.5” Paddle, 316 SS, Electropolished for V-Series 12-1035C4-VKPDSE 15” Paddle, 316 SS, Electropolished 12-1030HansonC4-HABSK040 40MeshBasket(USPStandardSizeMesh) 65-220-000C4-HABSSCS 16” Basket Shaft, 316 SS, Spring Clip Style 65-237-000C4-HAPDE 16” Paddle, 316 SS, Electropolished 65-700-036Sotax C4-SXBSK010 10MeshBasket(USPStandardSizeMesh) -C4-SXBSK020 20MeshBasket(USPStandardSizeMesh) 9353C4-SXBSK040 40MeshBasket(USPStandardSizeMesh) 2830C4-SXBSKSUP Suppository Basket, Plastic -
Dissolution Basket Storage Prolong the life of baskets and save money
To ensure they meet USP requirements, it is essential that for all tests, baskets are not bent or deformed. The chanc-es of accidentally damaging baskets can be significantly reduced with the use of a good quality basket holder, such as C4-SDBH-12.
Key Benefits:• Compatible with all popular basket types (Caleva,Distek,Erweka,Hanson,Pharmatest,Sotax,VanKel,Zymark)• O-rings ensure baskets are held firmly to the holder• Stores up to 12 baskets• Fully stackable, letting you transport many baskets at a time• Low cost, it pays for itself by preventing damage to just one basket!
Part No. (ea) DescriptionC4-SDBH-12 Stackable Dissolution Basket Holder
Ordering Information
NEW Sotax Basket Shafts
and paddlesNow Available
C4-SXBSKSH
Dissolution Essentials
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 79
Sampling Cannula and Cannula Filters
C4-HACAN
Distek Filter DiscDistek Cannula Filter
Part No. (each) Description OEMDistekC4-DKSSP900 900mL Standard Sampling Probe 2910-0900C4-DKSSP900-SH 900mL Standard Sampling Probe, Solid Housing 2910-0906C4-DKFD010 10MicronFilterDisks,(JAR/1000) 5720-0203C4-DKFIL010 10MicronPorousFilters,1/16”,(JAR/1000) 5720-0275C4-DKFD045 45MicronFilterDisks,(JAR/1000) 5720-0275C4-DKFIL045 45MicronPorousFilters,1/16”,(JAR/1000) 5720-0020-1000C4-DKFIL070 70MicronPorousFilters,1/16”,(JAR/1000) 5720-0503 Agilent (formerly VanKel/Varian) CompatibleC4-VKCAN 4.75’’(900mL)Bent316SSCannulaw/SSluerlock 12-3200C4-VKCANAS 4.5”(900mL)Auto-SamplingCannula 17-3300C4-VKFIL010 10MicronPorousFilters,(JAR/1000) 17-4000C4-VKFIL045 45MicronPorousFilters,(JAR/1000) -C4-VKFIL070 70MicronPorousFilters,(JAR/1000) 17-4020C4-VKFT010 10MicronFilterTips,(JAR/1000) 17-4120C4-VKFT045 45MicronFilterTips,(JAR/1000) 17-4140HansonC4-HACANPT 4.75”(900mL)Bent316SSCannulaw/SSpermtip -C4-HACAN 4.75”(900mL)Bent316SS1/8”ODCannulaw/SSluerlock 95-590-002C4-HACANPEEK 4.75”(900mL)BentPEEK1/8”ODCannulaw/PEEKluerlock 95-590-005C4-HAFIL010 10MicronPorousFilters,(JAR/1000) 27-101-091C4-HAFIL010-16 10MicronPorousFilters,1/16”,(JAR/1000) 27-101-093C4-HAFIL045 45MicronPorousFilters,(JAR/1000) -C4-HAFIL045-16 45MicronPorousFilters,1/16”,(JAR/1000) -C4-HAFIL070 70MicronPorousFilters,(JAR/1000) 27-101-092C4-HAFIL070-16 70MicronPorousFilters,1/16”,(JAR/1000) 27-101-094SotaxC4-SXCANLA 13”(900mL)Bent316SSCannulaw/lueradapterC4-SXCANSTS 13”(900mL)316SS1/8”ODCannulaw/stopperandsleeveC4-SXFIL010 10MicronPorousFilters,(JAR/1000) -C4-SXFIL035 35MicronPorousFilters,(JAR/1000) -C4-SXFIL070 70MicronPorousFilters,(JAR/1000) -
Ordering Information -Sampling Cannula and Cannula Filters
Part No. (each) Description SUN-SRi EquivalentC4-PL010 10MicronPorousFilters,(JAR/1000) 400105C4-PL035 35MicronPorousFilters,(JAR/1000) 400102C4-PL070 70MicronPorousFilters,(JAR/1000) 400107
Cannula stoppers and other sampling cannula and cannula filters also available. Please enquire.
Sampling Cannula and Cannula FiltersCHROM4 offers traditional manual and automated sam-pling cannula for most dissolution baths. In addition to “traditional” cannula, CHROM4 offers an extensive selec-tion of “innovative”, DE designed cannula. These cannula include PEEK cannula, improved filter housing cannula and a low cost cannula which offers significant cost savings without sacrificing quality.
Probe tip filters for most sampling methods are available in numerousmicronratings(from1umto70um)andtheyareavailable in packs of 1000 or 100. These filters are made from inert, high-density polyethylene. All CHROM4 filters have been specifically formulated to provide the specified micron ratings. All formulations have been verified by porisometer testing.
Ordering Information - ChromFlo
Dissolution Essentials
80 info@chrom4.com :: www.chrom4.com
Sinkers, Basket Shafts and Vessel Stands
Universal Vessel Stands For the safe transportation and storage of vessels
Due to their shape, dissolution vessels are difficult to hold securely. This can often result in scratched, chipped or even smashed vessels.The steel/acrylic stands are available in 6 or 8 vessel capacities and can hold vessels from any dissolution bath manufacturer.They can also be stacked together to save bench space and enable you to transport many vessels at a time.
Tubing
Basket Shaft/Paddle Holders Ideal for both basket shaft and paddle storage
Key Benefits:• Prevents shafts/paddles from becoming bent or scratched• Allows quick and easy transport of many shafts/paddles • Handy end plate to stop shafts/paddles sliding out when carrying• Holds all lengths and types of basket shafts and paddles• Non-corrosive, quality plastic construction • Space-saving, attractive design • Available in both 12 and 16 shaft capacities
Part No. DescriptionC4-PDLHLD-12 12 Piece Dissolution Paddle Holder
Ordering Information
Part No. (each) DescriptionC4-UVS-6 Vessel Stand, 6 PositionC4-UVS-8 Vessel Stand, 8 Position
Ordering Information
Part No. (ea) Description OEMDE
C4-PSTFEPFEP PTFE Tubing for HP 1/32” (0.8mm)IDx1/16”(1.6mm)OD,500’(152m)Roll
-
C4-PSTTYG TygonTubing,1/16”(1.6mm) x 1/8”(3.2mm)(15m) -
Distek
C4-DKPPTSA-6 Peristaltic Pump Tubing, Santoprene(Setof6) 5640-0337
C4-DKTAAT-123 Collar Tygon Auto Analyser Tubing,0.08”(2.06mm)ID(Setof12)
5041-2166
VanKel (Agilent/formerly Varian)
C4-VKPSTSA-8Peristaltic Pump Tubing, Silicone, CodedPurple&White(Setof8)
17-6010
C4-VKPSTTYColour Coded Sample PTFE Tubing, 0.42” (10.67mm)IDx0.066”(1.68mm)OD,8Lengthsof50’(15m)
17-6035
Sinkers CHROM4 offers the most extensive selection of tablet and capsule sinkers available from a single source. Their family of sinkers includes most configurations currently in use worldwide, including helical style, basket style, three-prong style and others.
Part No. (each) Description OEM Agilent (formerly VanKel/Varian) CompatibleC4-VKPCS 3 Prong Capsule Sinker, Plastic 12-3050C4-VKBSK-JP Japanese Pharmacopeia Basket Sinker 12-3070SotaxC4-SXSSCS-4 4 Spring Style Capsule Sinker, 316 SS 8280C4-SXSSCS-5 5 Spring Style Capsule Sinker, 316 SS 7346C4-SXSSCS-6 6 Spring Style Capsule Sinker, 316 SS 8283C4-SXSSCS-7 7 Spring Style Capsule Sinker, 316 SS 6881C4-SXSSCS-10 10 Spring Style Capsule Sinker, 316 SS 7349C4-SXORS O-Ring Sinker, 316 SS 8399
Ordering Information - Sinkers
C4-VKPCS
C4-VKBSK-JP
GC Columns
info@chrom4.com :: www.chrom4.com 81info@chrom4.com :: www.chrom4.com
* Maximum film thickness depends also on the stationary phase type.
AVAILABLE IN ANY PHASE YOU REQUIRE
Common Phases Polarity Quick View
non polar polar
CH-1
CH-1MS
CH-1HT
CH-5
CH-5MS
CH-5DF CH-17
CH-1701
CH-20
CH-225CH-35
CH-35MS
CH-624
CH-BAC2
CH-BIOHT
CH-FFAP
CH-PAH
CH-PONA
CH-STAR-WAX
CH-88
CH-BAC1
GC Columns Dimensions Available
FASTI.D. 0.10mm 0.15mm 0.18mm
Length from 2 to 15m from 2.5 to 30m from 5 to 60m
Film Thickness* from 0.05 to 1.00µm from 0.05 to 1.40µm from 0.05 to 1.50µm
CONVENTIONALI.D. 0.25mm 0.32mm
Length from 5 to 100m from 5 to 100m
Film Thickness* from 0.05 to 3.00µm from 0.05 to 5.00µm
WIDE BOREI.D. 0.45mm 0.53mm
Length from 10 to 75m from 10 to 75m
Film Thickness* up to 5.00µm up to 5.00µm
Chiral columns available in various phases. Please visit www.chrom4.com for information or contact your local distributor.
GC Columns
82 info@chrom4.com :: www.chrom4.com
(mm) (m) (µm) Part No. Restek J&W No. iso/prog. (°C)
0.2515 0.10 CH1HT-152510 - 122-1111 -60to380
30 0.10 CH1HT-02510 - 122-1131 -60to380
0.3215 0.10 CH1HT-153210 - 123-1111 -60to380
30 0.10 CH1HT-303210 - 123-1131 -60to380
(mm) (m) (µm) Part No. Restek J&W No. iso/prog. (°C)
0.53
102.65 CH1-1053265 - 125-10HB -60to260 / 300
5.00 CH1-1053500 - 125-10H5 -60to280 / 300
15
0.15 CH1-155315 - 125-1011 -60to340/ 360
0.50 CH1-155350 18037 125-1017 -60to300 / 320
1.00 CH1-1553100 18052 125-101J -60to300 / 320
1.50 CH1-1553150 18067 125-1012 -60to300 / 320
3.00 CH1-1553300 10182 125-1014 -60to260 / 300
5.00 CH1-1553500 10177 125-1015 -60to280 / 300
25 5.00 CH1-2553500 - 125-1025 -60to280 / 300
30
0.50 CH1-305350 18040 125-1037 -60to300 / 320
1.00 CH1-3053100 18055 125-103J -60to300 / 320
1.50 CH1-3053150 18070 125-1032 -60to300 / 320
2.65 CH1-3053265 - 125-103B -60to260 / 300
3.00 CH1-3053300 10185 125-1034 -60to260 / 300
5.00 CH1-3053500 10179 125-1035 -60to280 / 300
60
1.00 CH1-6053100 18058 125-106J -60to300 / 320
1.50 CH1-6053150 18073 125-1062 -60to300 / 320
3.00 CH1-6053300 10188 125-1064 -60to260 / 300
5.00 CH1-6053500 10183 125-1065 -60to280 / 300
CH-1 (continued)
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.10
100.10 CH1-101010 41101 127-1012 -60to325 / 350
0.40 CH1-101040 41103 127-1013 -60to325 / 350
200.10 CH1-201010 41102 127-1022 -60to325 / 350
0.40 CH1-201040 41104 127-1023 -60to325 / 350
0.18
100.18 CH1-101818 40101 121-1012 -60to325 / 350
0.40 CH1-101840 40110 121-1013 -60to325 / 350
200.18 CH1-201818 40102 121-1022 -60to325 / 350
0.40 CH1-201840 40111 121-1023 -60to325 / 350
40 0.40 CH1-401840 40112 121-1043 -60to325 / 350
0.25
15
0.10 CH1-152510 10105 122-1011 -60to325 / 350
0.25 CH1-152525 10120 122-1012 -60to325 / 350
1.00 CH1-1525100 10150 122-1013 -60to325 / 350
25 0.25 CH1-252525 - 122-1022 -60to325 / 350
30
0.10 CH1-302510 10108 122-1031 -60to325 / 350
0.25 CH1-302525 10123 122-1032 -60to325 / 350
0.50 CH1-302550 10138 122-103E -60to325 / 350
1.00 CH1-3025100 10153 122-1033 -60to325 / 350
0.32
15
0.10 CH1-153210 10106 123-1011 -60to325 / 350
0.25 CH1-153225 10121 123-1012 -60to325 / 350
1.00 CH1-1532100 10151 123-1013 -60to325 / 350
3.00 CH1-1532300 10181 123-1014 -60to280 / 300
5.00 CH1-1532500 10176 123-1015 -60to280 / 300
25
0.25 CH1-253225 - 123-1022 -60to325 / 350
0.52 CH1-253252 - 123-1026 -60to325 / 350
1.05 CH1-2532105 - 123-102F -60to280 / 300
30
0.10 CH1-303210 10109 123-1031 -60to325 / 350
0.25 CH1-303225 10124 123-1032 -60to325 / 350
0.50 CH1-303250 10139 123-103E -60to325 / 350
1.00 CH1-3032100 10154 123-1033 -60to325 / 350
3.00 CH1-3032300 10184 123-1034 -60to280 / 300
5.00 CH1-3032500 10178 123-1035 -60to280 / 300
500.25 CH1-503225 123-1052 -60to325 / 350
0.52 CH1-503252 18010 123-1056 -60to325 / 350
1.05 CH1-5032105 123-105F -60to280 / 300
60
0.10 CH1-603210 10112 123-1061 -60to325 / 350
0.25 CH1-603225 10127 123-1062 -60to325 / 350
0.50 CH1-603250 10142 123-106E -60to325 / 350
1.00 CH1-6032100 10157 123-1063 -60to325 / 350
3.00 CH1-6032300 10187 123-1064 -60to280 / 300
5.00 CH1-6032500 10180 123-1065 -60to280 / 300
0.45 301.27 CH1-3045127 - 124-1032 -60to300/ 320
2.55 CH1-3045255 - 124-1034 -60to260 / 300
CH-1 • Equivalent to USP G1, G2, G9, G38100% methyl polysiloxane
ChromGC
CH-1
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.1010 0.40 CH1MS-101040 - 127-0113 -60to340 / 360
20 0.40 CH1MS-201040 - 127-0123 -60to340 / 360
0.1810 0.18 CH1MS-101818 - - -60to340 / 360
20 0.18 CH1MS-201818 - - -60to340 / 360
0.2012 0.33 CH1MS-122033 - 128-0122 -60to340 / 360
25 0.33 CH1MS-252033 - 128-0122 -60to340 / 360
0.25
15 0.25 CH1MS-152525 11620 122-0112 -60to340 / 360
300.10 CH1MS-302510 11608 122-0131 -60to340 / 360
0.25 CH1MS-302525 11623 122-0132 -60to340 / 360
60 0.25 CH1MS-602525 - 122-0162 -60to340 / 360
0.32
15 0.25 CH1MS-153225 11621 123-0112 -60to340 / 360
300.10 CH1MS-303210 11609 123-0131 -60to340 / 360
0.25 CH1MS-303225 11624 123-0132 -60to340 / 360
60 0.25 CH1MS-603225 - 123-0162 -60to340 / 360
CH-1MS • Equivalent to USP G2100% Dimethylpolysiloxane
ChromGC
CH-1MS
CH-1HT100% methyl polysiloxane for high temperature
ChromGC
CH-1HT
GC Columns
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 83
ChromGC
CH-5
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.25 600.15 CH5DF-602515 - 122-2461 350 / 360
0.25 CH5DF-602525 - 122-2462 350 / 360
CH-5DF (Dioxin Furan)5% silphenylen
ChromGC
CH-5DF
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.10
10
0.10 CH5-101010 41201 127-5012 -60to325 / 350
0.17 CH5-101017 127-501E -60to325 / 350
0.40 CH5-101040 41203 127-5013 -60to325 / 350
200.10 CH5-201010 41202 127-5022 -60to325 / 350
0.40 CH5-201040 41204 127-5023 -60to325 / 350
0.18
100.18 CH5-101818 - 121-5012 -60to325 / 350
0.40 CH5-101840 40210 121-5013 -60to325 / 350
200.18 CH5-201818 - 121-5022 -60to325 / 350
0.40 CH5-201840 40211 121-5023 -60to325 / 350
0.20
12 0.33 CH5-122033 - 128-5012 -60to325 / 350
15 0.20 CH5-152020 - 128-50H7 -60to325 / 350
25 0.33 CH5-252033 - 128-5022 -60to325 / 350
0.25
15
0.10 CH5-152510 10205 122-5011 -60to325 / 350
0.25 CH5-152525 10220 122-5012 -60to325 / 350
0.50 CH5-152550 12335 122-501E -60to325 / 350
1.00 CH5-1525100 10250 122-5013 -60to325 / 350
25 0.25 CH5-252525 - 122-5022 -60to325 / 350
30
0.10 CH5-302510 10208 122-5031 -60to325 / 350
0.25 CH5-302525 10223 122-5032 -60to325 / 350
0.50 CH5-302550 12338 122-503E -60to325 / 350
1.00 CH5-3025100 10253 122-5033 -60to325 / 350
50 0.25 CH5-502525 - 122-5052 -60to325 / 350
60
0.10 CH5-602510 10211 122-5061 -60to325 / 350
0.25 CH5-602525 10226 122-5062 -60to325 / 350
0.50 CH5-602550 10241 122-506E -60to325 / 350
1.00 CH5-6025100 10256 122-5063 -60to325 / 350
0.10 CH5-602510 10206 123-5011 -60to325 / 350
0.32
150.25 CH5-153225 10221 123-5012 -60to325 / 350
1.00 CH5-1532100 - 123-5013 -60to325 / 350
25 0.52 CH5-253252 - 123-5026 -60to325 / 350
30
0.10 CH5-303210 10209 123-5031 -60to325 / 350
0.25 CH5-303225 10224 123-5032 -60to325 / 350
0.50 CH5-303250 10239 123-503E -60to325 / 350
1.00 CH5-3032100 10254 123-5033 -60to325 / 350
50 1.00 CH5-5032100 - 123-5053 -60to325 / 350
600.25 CH5-603225 10227 123-5062 -60to325 / 350
1.00 CH5-6032100 10257 123-5063 -60to325 / 350
0.4515 1.27 CH5-1545127 - 124-5012 -60to300 / 320
30 1.27 CH5-3045127 - 124-5032 -60to300 / 320
0.53
10 2.65 CH5-1053265 - 125-50HB -60to300 / 320
15
0.25 CH5-155325 10222 125-501K -60to300 / 320
0.50 CH5-155350 10237 125-5017 -60to300 / 320
1.00 CH5-1553100 12352 125-501J -60to300 / 320
1.50 CH5-1553150 10267 125-5012 -60to300 / 320
30
0.25 CH5-305325 10225 125-503K -60to300 / 320
0.50 CH5-305350 10240 125-5037 -60to300 / 320
0.88 CH5-305388 - 125-503D -60to300 / 320
1.00 CH5-3053100 12355 125-503J -60to300 / 320
1.50 CH5-3053150 10270 125-5032 -60to300 / 320
3.00 CH5-3053300 10285 125-5034 -60to280 / 300
5.00 CH5-3053500 10279 125-5035 -60to280 / 300
601.50 CH5-6053150 10273 125-5062 -60to300 / 320
5.00 CH5-6053500 10283 125-5065 -60to260 / 280
CH-5 • Equivalent to USP G27, G36, G41(5%-Phenyl) - methylpolysiloxane
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.1820 0.18 CH5MS-201818 - 121-5522 -60to325 / 350
40 0.18 CH5MS-401818 - 121-5542 -60to325 / 350
0.20
12 0.33 CH5MS-122033 - 128-5512 -60to325 / 350
25 0.33 CH5MS-252033 - 128-5522 -60to325 / 350
50 0.33 CH5MS-502033 - 128-5552 -60to325 / 350
0.25
15
0.10 CH5MS-152510 12705 122-5511 -60to325 / 350
0.25 CH5MS-152525 12720 122-5512 -60to325 / 350
0.50 CH5MS-152550 12735 122-5516 -60to325 / 350
1.00 CH5MS-1525100 12750 122-5513 -60to325 / 350
25 0.25 CH5MS-252525 - 122-5522 -60to325 / 350
30
0.10 CH5MS-302510 12708 122-5531 -60to325 / 350
0.25 CH5MS-302525 12723 122-5532 -60to325 / 350
0.50 CH5MS-302550 12738 122-5536 -60to325 / 350
1.00 CH5MS-3025100 12753 122-5533 -60to325 / 350
50 0.25 CH5MS-502525 - 122-5552 -60to325 / 350
60
0.10 CH5MS-602510 - 122-5561 -60to325 / 350
0.25 CH5MS-602525 - 122-5562 -60to325 / 350
1.00 CH5MS-6025100 - 122-5563 -60to325 / 350
0.32
15
0.10 CH5MS-153210 12706 123-5511 -60to325 / 350
0.25 CH5MS-153225 12721 123-5512 -60to325 / 350
1.00 CH5MS-1532100 12751 123-5513 -60to325 / 350
25 0.52 CH5MS-253252 - 123-5526 -60to325 / 350
30
0.10 CH5MS-303210 - 123-5531 -60to325 / 350
0.25 CH5MS-303225 12724 123-5532 -60to325 / 350
0.50 CH5MS-303250 - 123-5536 -60to325 / 350
1.00 CH5MS-3032100 12754 123-5533 -60to325 / 350
60
0.10 CH5MS-603210 - 123-5561 -60to325 / 350
0.25 CH5MS-603225 - 123-5562 -60to325 / 350
1.00 CH5MS-6032100 - 123-5563 -60to325 / 350
0.53
15 1.50 CH5MS-1553150 12767 125-5512 -60to300 / 320
301.00 CH5MS-3053100 12755 125-553J -60to300 / 320
1.50 CH5MS-3053150 12770 125-5532 -60to300 / 320
CH-5MS • Equivalent to USP G27(5%-Phenyl) - methylpolysiloxane
ChromGC
CH-5MS
GC Columns
84 info@chrom4.com :: www.chrom4.com
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.25 30 0.25 CH20-302525 - 112-2032 60to230 / 250
0.32 30 0.25 CH20-303225 - 113-2032 60to230 / 250
CH-CARBOWAX-20MPolyethylene Glycol • Equivalent to USP G14, G15, G16)
ChromGC
CH-CARBOWAX-20M
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.32 30 1.80 CHBAC1-3032180 - 123-9134 20to260 / 280
0.53 30 3.00 CHBAC1-3053300 - 125-9134 20to260 / 280
CH-BAC1Ethanol/Acetone
ChromGC
CH-BAC1
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.25 30 0.25 CH35-302525 - 122-1932 40to300 / 320
0.32 300.25 CH35-303225 - 123-1932 40to300 / 320
0.50 CH35-303250 - 123-1933 40to300 / 320
0.53 300.50 CH35-305350 - 125-1937 40to280 / 300
1.00 CH35-3053100 - 125-1932 40to300 / 320
CH-35 • Equivalent to USP G42(35%-Phenyl) - methylpolysiloxane
ChromGC
CH-35
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.25
15 0.25 CH35MS-152525 - 122-3812 50to340 / 360
30 0.25 CH35MS-302525 - 122-3832 50to340 / 360
60 0.25 CH35MS-602525 - 122-3862 50to340 / 360
0.32 30 0.25 CH35MS-303225 - 123-3832 50to340 / 360
0.53 300.50 CH35MS-305350 - 125-3837 50to320 / 340
1.00 CH35MS-3053100 - 125-3832 50to320 / 340
CH-35MS • Equivalent to USP G42(35%-Phenyl) - methylpolysiloxane
ChromGC
CH-35MS
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.20 50 0.50 CHPONA-502050 - 128-1056 -60to325 / 350
0.25 100 0.50 CHPONA-002550 10195 122-10A6 -60to325 / 350
CH-PONA100%- Dimethylpolysiloxane
ChromGC
CH-PONA
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.18 40 0.07 CHPAH-40187 49316 - 340 / 360
0.2530 0.10 CHPAH-302510 49318 - 340 / 360
60 0.10 CHPAH-602510 49317 - 340 / 360
CH-PAH8-10% phenyl
ChromGC
CH-PAH
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.3210 0.10 CHBIOHT-103210 10292 - 360 / 380
15 0.10 CHBIOHT-153210 10293 - 360 / 380
CH-BIO-HT5% phenyl
ChromGC
CH-BIO-HT
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.32 30 1.20 CHBAC2-3032120 - 123-9234 20to260 / 280
0.53 30 2.00 CHBAC2-3053200 - 125-9234 20to260 / 280
CH-BAC2Ethanol/Acetone
ChromGC
CH-BAC2
GC Columns
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 85
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.10 200.10 CH1701-201010 42202 127-0722 -20to280
0.40 CH1701-201040 - 127-0723 -20to280
0.18 10 0.40 CH1701-101840 - 121-0713 -20to280
0.25
150.25 CH1701-152525 - 122-0712 -20to280
1.00 CH1701-1525100 12050 122-0713 -20to280
30
0.15 CH1701-302515 - 122-0731 -20to280
0.25 CH1701-302525 12023-600
122-0732 -20to280
1.00 CH1701-3025100 12053 122-0733 -20to280
60
0.15 CH1701-602515 - 122-0761 -20to280
0.25 CH1701-602525 12026 122-0762 -20to280
1.00 CH1701-6025100 12056 122-0763 -20to280
0.32
150.25 CH1701-153225 12021 123-0712 -20to280
1.00 CH1701-1532100 12051 123-0713 -20to280
30
0.15 CH1701-303215 - 123-0731 -20to280
0.25 CH1701-303225 12024 123-0732 -20to280
1.00 CH1701-3032100 12054 123-0733 -20to280
50 1.00 CH1701-5032100 - 123-0753 -20to280
600.25 CH1701-603225 12027 123-0762 -20to280
1.00 CH1701-3032100 12057 123-0763 -20to280
0.53
15 1.00 CH1701-1553100 12052 125-0712 -20to280
300.50 CH1701-305350 12040 125-0737 -20to280
1.00 CH1701-3053100 12055 125-0732 -20to280
CH-1701 • Equivalent to USP G46(14%-Cyanopropyl-phenyl) - methylpolysiloxane
ChromGC
CH-1701
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.1010
0.10 CH17-101010 - 127-1712 40to280 / 300
0.20 CH17-201020 - 127-1713 40to280 / 300
20 0.10 CH17-201010 - 127-1722 40to280 / 300
0.18 200.18 CH17-201818 - 121-1722 40to280 / 300
0.30 CH17-201830 - 121-1723 40to280 / 300
0.25
15
0.15 CH17-152515 - 122-1711 40to280 / 300
0.25 CH17-152525 10520 122-1712 40to280 / 300
0.50 CH17-152550 10535 122-1713 40to280 / 300
30
0.15 CH17-302515 - 122-1731 40to280 / 300
0.25 CH17-302525 10523 122-1732 40to280 / 300
0.50 CH17-302550 10538 122-1733 40to280 / 300
60 0.25 CH17-602525 - 122-1762 40to280 / 300
0.32
15
0.15 CH17-153215 - 123-1711 40to280 / 300
0.25 CH17-153225 10521 123-1712 40to280 / 300
0.50 CH17-153250 10536 123-1713 40to280 / 300
30
0.15 CH17-303215 - 123-1731 40to280 / 300
0.25 CH17-303225 - 123-1732 40to280 / 300
0.50 CH17-303250 10539 123-1733 40to280 / 300
60 0.25 CH17-603225 - 123-1762 40to280 / 300
0.53
15 1.00 CH17-1553100 10552 125-1712 40to260 / 280
30 1.00 CH17-3053100 10555 125-1732 40to260 / 280
601.50 CH17-6053150 - 125-1733 40to260 / 280
1.00 CH17-6053100 10558 125-1762 40to260 / 280
CH-17 • Equivalent to USP G3, G17(50%-Phenyl) - methylpolysiloxane
ChromGC
CH-17
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.10 20 0.10 CH225-201010 - 127-2222 45to220 / 240
0.18 20 0.20 CH225-201820 - 121-2223 45to220 / 240
0.25
15 0.25 CH225-152525 - 122-2212 45to220 / 240
300.15 CH225-302515 - 122-2231 45to220 / 240
0.25 CH225-302525 - 122-2232 45to220 / 240
0.32 30 0.25 CH225-303232 - 123-2232 45to220 / 240
0.5315 1.00 CH225-1553100 - 125-2212 40to200 / 220
30 1.00 CH225-3053100 - 125-2232 40to200 / 220
CH-225 • Equivalent to USP G7, G19(50%-Cyanopropyl-phenyl) - methylpolysiloxane
ChromGC
CH-225
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.18 20 1.00 CH624-2018100 40924 121-1324 -20to260
0.2530 1.40 CH624-3025140 10968 122-1334 -20to260
60 1.40 CH624-6025140 10969 122-1364 -20to260
0.3230 1.80 CH624-3032180 10970 123-1334 -20to260
60 1.80 CH624-6032180 10972 123-1364 -20to260
0.4530 2.55 CH624-3045255 - 124-1334 -20to260
75 2.55 CH624-7545255 - 124-1374 -20to260
0.53
30 3.00 CH624-3053300 10971 125-1334 -20to260
60 3.00 CH624-6053300 10973 125-1364 -20to260
75 3.00 CH624-7553300 10974 125-1374 -20to260
CH-624 • Equivalent to USP G43(6% cyanopropyl-phenyl) - methylpolysiloxane
ChromGC
CH-624
For EPA Methods (Drinking & Waste Water),
please visit www.chrom4.com
info@chrom4.com :: www.chrom4.com
GC Columns
86 info@chrom4.com :: www.chrom4.com
CH-STAR-WAX • Equivalent to USP G14, G15, G16Polyethylene Glycol
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.10
100.10 CHSWAX-101010 - 127-7012 20to250 / 270
0.20 CHSWAX-101020 - 127-7013 20to250 / 270
200.10 CHSWAX-201010 - 127-7022 20to250 / 270
0.20 CHSWAX-201020 - 127-7023 20to250 / 270
0.18
10 0.18 CHSWAX-101818 - 121-7012 20to250 / 270
200.18 CHSWAX-201818 - 121-7022 20to250 / 270
0.30 CHSWAX-201830 - 121-7023 20to250 / 270
40 0.30 CHSWAX-401830 - 121-7043 20to250 / 270
0.25
150.25 CHSWAX-152525 - 122-7012 20to250 / 270
0.50 CHSWAX-152550 - 122-7013 20to250 / 270
30
0.15 CHSWAX-302515 - 122-7031 20to250 / 270
0.25 CHSWAX-302525 10673 122-7032 20to250 / 270
0.50 CHSWAX-302550 - 122-7033 20to250 / 270
60
0.15 CHSWAX-602515 - 122-7061 20to250 / 270
0.25 CHSWAX-602525 - 122-7062 20to250 / 270
0.50 CHSWAX-602550 - 122-7063 20to250 / 270
0.32
150.25 CHSWAX-153225 - 123-7012 20to250 / 270
0.50 CHSWAX-153250 - 123-7013 20to250 / 270
30
0.15 CHSWAX-303215 - 123-7031 20to250 / 270
0.25 CHSWAX-303225 10674 123-7032 20to250 / 270
0.50 CHSWAX-303250 - 123-7033 20to250 / 270
600.25 CHSWAX-603225 - 123-7062 20to250 / 270
0.50 CHSWAX-603250 - 123-7063 20to250 / 270
0.45
30 0.85 CHSWAX-304585 - 124-7032 20to250 / 270
150.50 CHSWAX-154550 - 125-7017 20to250 / 270
1.00 CHSWAX-1545100 - 125-7012 20to250 / 270
0.5330
0.25 CHSWAX-305325 - 125-7031 20to250 / 270
0.50 CHSWAX-305350 - 125-7037 20to250 / 270
1.00 CHSWAX-3053100 - 125-7032 20to250 / 270
60 1.00 CHSWAX-6053100 - 125-7062 20to250 / 270
ChromGC
CH-STAR-WAX
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.25
15 0.25 CHFFAP-152525 11020 122-3212 40to250
300.25 CHFFAP-302525 11023 122-3232 40to250
0.50 CHFFAP-302550 11038 122-3233 40to250
0.32
15 0.25 CHFFAP-153225 11021 123-3212 40to250
30
0.25 CHFFAP-303225 11024 123-3232 40to250
0.50 CHFFAP-303250 11039 123-3233 40to250
1.00 CHFFAP-3032100 11054 123-3234 40to250
50 0.50 CHFFAP-503250 - 123-3253 40to250
60
0.25 CHFFAP-603225 11027 123-3262 40to250
0.50 CHFFAP-603250 11042 123-3263 40to250
1.00 CHFFAP-6032100 11057 123-3264 40to250
0.45 30 0.85 CHFFAP-304585 - 124-3232 40to250
0.53
150.50 CHFFAP-155350 11037 125-3217 40to250
1.00 CHFFAP-1553100 11052 125-3212 40to250
30
0.25 CHFFAP-305325 11025 125-3231 40to250
0.50 CHFFAP-305350 11040 125-3237 40to250
1.00 CHFFAP-3053100 11055 125-3232 40to250
1.50 CHFFAP-3053150 - 125-3233 40to250
CH-FFAP • Equivalent to USP G25, G35, G39Nitroterephthalic Acid Modified Polyethylene Glycol
ChromGC
CH-FFAP
(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)
0.20 50 0.20 CH88-502020 - 60to250
0.25
50 0.20 CH88-502520 - 60to250
60 0.20 CH88-602520 - 60to250
100 0.20 CH88-1002520 13199 60to250
CH-88 • Equivalent to USP G5, G8, G48Biscyanopropyl polysiloxane
ChromGC
CH-88
GC Septa:: Lowest bleed of any septa:: Soft and resealable:: Molded for dimensional consistency giving more
injections per septum, thereby costing less
Precision molded GC Septa made from 100% Pure Premium Silcone Rubber. Our GC septum delivers the ultimate in low bleed properties and longevity. Our unique formulation and conditioning process is what separates our GC Septa from the rest.
Manufacturer Size Quantity PartNumber
OVSC 9.5mm 50 CH-237705
OVSC 11mm 50 CH-237715
Chrom4 11mm 50 CHR-HD-A1544
Chrom4 9.5mm 50 CHR-HD-A1486
Chrom4 10mm 50 CHR-HD-A1405
GC Accessories
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 87info@chrom4.com :: www.chrom4.com
GC Accessories
Description ID (mm) OD (mm) Length (mm) Glass Type Deactivated Agilent™ P/N Part Number
Deactivated Injection Port Liners
Tapered Liner - 1 End 4.0 6.45 78.5 Borosilicate Yes 5181-3316 IS-4209
Tapered Liner - 1 End w/wool*
4.0 6.45 78.5 Borosilicate Yes 5062-3587 IS-4210
Tapered Liner - Both Ends 4.0 6.45 78.5 Borosilicate Yes 5181-3315 IS-4211
Split/Splitless Liner w/wool* 4.0 6.3 78.5 Borosilicate Yes 19251-60540 IS-4212
Cup Split Liner+ 4.0 6.3 78.5 Borosilicate No 18740-80190 IS-4202
DIrect Liner 1.5 6.45 78.5 Borosilicate Yes 18740-80200 IS-4215
DIrect Connect Dual Taper, Bottom Hole 4.0 6.3 78.5 Borosilicate Yes G1544-80700 IS-4217
Split only, Tapered, Low Pressure Drop 4.0 6.3 78.5 Borosilicate Yes 5183-4647 IS-4220
GP Split, 1 Taper Liner w/wool 4.0 6.3 78.5 Borosilicate Yes 5183-4711 IS-4221
Inlet Liners
+ The Cup Split Liner (IS-4202) contain small amounts of packing (10% CH-1 on 80/100 Chromosorb-WHP) retained by silanized glasswool.* Containing deactivated quartz wool packing to ensure vaporization of your sample before reaching the column entrance. The liner is made of borosilicate glass.
Liners for other brands available. See www.chrom4.com for details.
:: Deactivated for maximum inertness:: Meets or exceeds original manufacturers’ specifications:: Use liners packed with fused silica wool for the Agilent™ 7673 Autosampler
GC Accessories
88 info@chrom4.com :: www.chrom4.com
Agilent™ Compatible Accessories
Electron Multipliers
Instrument Analyzer Type Technique Part Number
5971, 5972, 5973, 5975, LC/MSD Quadrupole GC-MS DT-2300A
Ferrules (10 per pack)Ferrule
SizeTubing Size
Style 100% Graphite
Agilent™ Part Number
85% Polyimide 15% Graphite
Agilent™ Part Number
Agilent™ Ferrules
1/16” 0.4mm - OV-GF-04 500-2004 OV-MS-04 5062-3508
1/16” 0.4mm HP/Agilent Short OV-GF-04-HP 500-2114 OV-MS-04-HP 5181-3323
1/16” 0.5mm - OV-GF-05 - OV-MS-05 5062-3506
1/16” 0.5mm HP/Agilent Short OV-GF-05-HP 5080-8853 OV-MS-05-HP 5062-3514
1/16” 0.8mm - OV-GF-08 500-2008 OV-MS-08 5062-3538
1/16” 0.8mm HP/Agilent Short OV-GF-08-HP 500-2118 OV-MS-08-HP 5062-3512
1/16” 1.00mm - OV-GF-10 500-2010 OV-MS-10 -
1/16” 1.0mm HP/Agilent Short OV-GF-10-HP 5080-8773 OV-MS-10HP -
1/16” 1.2mm - OV-GF-12 500-2012 OV-MS-12 -
1/16” 1/16” - OV-GF-01 0100-1326 OV-MS-01 -
1/8” 1/8” - OV-GF-02 0100-1325 OV-MS-02 -
1/4” 1/4” - OV-GF-03 0100-1324 OV-MS-03 -
1/8” 1/16” - OV-GF-68 0100-1336 OV-MS-68 -
1/4” 1/16” - OV-GF-64 0100-1335 OV-MS-64 -
1/4” 1/8” - OV-GF-81 0100-1334 OV-MS-81 -
1/16” 0.4mm 2-Hole OV-GF-14 - OV-MS-14 5062-3580
1/16” 0.5mm 2-Hole OV-GF-25 - OV-MS-15 5062-3581
1/16” 0.5mm No-Hole OV-GF-01-NH - OV-MS-01-NH 5181-3308
Ferrules (10 per pack) Ferrule
SizeTubing Size
60% Polyimide 40% Graphite
100% Polyimide
100% Teflon
Capillary Ferrules
1/16” 0.4mm OV-GH-04 OV-HF-04 OV-TF-04
1/16” 0.4mm OV-GH-04-HP OV-HF-04-HP -
1/16” 0.5mm OV-GH-05 OV-HF-05 OV-TF-05
1/16” 0.5mm OV-GH-05-HP OV-HF-05-HP -
1/16” 0.8mm OV-GH-08 OV-HF-08 OV-TF-08
1/16” 0.8mm OV-GH-08-HP OV-HF-08-HP -
1/16” 1.0mm OV-GH-10 OV-HF-10 OV-TF-10
1/16” 1.2mm OV-GH-12 OV-HF-12 OV-TF-12
Straight Ferrules
1/16” 1/16” OV-GH-01 OV-HF-01 OV-TF-01
1/8” 1/8” OV-GH-02 OV-HF-02 OV-TF-02
3/16” 3/16” - - OV-TF-316
1/4” 1/4” OV-GH-03 OV-HF-03 OV-TF-03
3/8” 3/8” - - OV-TF-138
1/2” 1/2” - - OV-TF-13
GC Accessories
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 89
GC Accessories
:: Inert:: Pretested:: Increased analytical column lifetime
Guard Columns - Retention Gaps
Guard columns consist of 5 meters of deactivated fused silica supplied with high temperature string. All guard columns are extremely inert and each is pretested.
Guard columns are useful in protecting your analytical column from harmful non-volatile contaminates that are commonly found in many environmental and industrial samples.
Attaching the guard column to the front of the analytical column using fused silica connectors, or zero dead volume union, will extend your column’s lifetime. The non-volatile contaminants are deposited onto the guard column.
Length I.D.mm
CatalogNumber
5 Meters 0.18 CH-6180-5
5 Meters 0.25 CH-6250-5
5 Meters 0.32 CH-6320-5
5 Meters 0.53 CH-6530-5
Manufacturer Size Quantity PartNumber
Perkin Elmer 11mm 50 CHR-HD-P1544
Shimadzu Plug 50 CHR-HD-S1544
GC Septa
:: Easy to handle:: A simple pressure to assure a perfect seal:: Easy to install
Press-Fit Connectors
ChromGC Press-Fit connectors allow you to simply connect, with a tight seal, different columns or Retention Gaps together in many ways. Our Press-Fit connectors are custom-made to fit any tubing size and to ensure the minimal dead volume.
Press-Fit Union linear connectors, ideal to connect two columns or a Retention Gap to the analytical column.
Press-Fit “Y” three way connectors, ideal to connect two analytical columns to a single injector port or split the exit of one column to a dual detector GC system. Many other configurations are possible using ChromGC “Y” Press-Fit.
ChromGC also produces personalized Multiways Press-Fit connectors for advanced analytical system configurations as MDGC and other custom settings.
Inlet Gold Seals
Instrument Description Pack Size
Part Number
For Agilent 7890/6890/6850
0.8mm Inlet Seal, Gold-plated Splitless, Gold-plated Washers 2 OV-4300
0.8mm Inlet Seal, Gold-plated, Splitless, Gold-plated Washers 10 OV-4300-10
0.8mm Inlet Seal, Gold-plated, Split Double Groove (Cross), Gold-plated Washers 2 OV-4400
0.8mm Inlet Seal, Gold-plated, Split Double Groove (Cross), Gold-plated Washers 10 OV-4400-10
Replacement Gold-plated Washers for Inlet Seal 12 OV-4800
GC Columns
90 info@chrom4.com :: www.chrom4.com
XTRM (Extreme) Columns
What is an XTRM (Extreme) column?XTRM columns are wall coated open tubular (WCOT) columns consisting of stainless steel tubing that has a special internal surface treatment. This special surface treatment makes the surface similar to deactivated fused silica. The unique surface treatment process permits us to offer XTRM columns in a wide range of internal diameters and phases. Because the special surface treatment permeates the stainless steel surface, rather than the conventional coating, the layer is particularly easy to bend, so the tubing can be coiled to very small diameters.
Compare XTRM columns and fused silica columns:• Metal columns can be coiled under 4.5 inches without breaking, ideal for small instruments.• Metal tubing allows XTRM columns to be used to higher temperatures (430°C) than fused silica columns
(standard rating is 380°C). • Coating efficiency (plates/meter) of XTRM columns is comparable to that of fused silica.• Dormancy of XTRM columns and fused silica columns is comparable, due to the unique properties
of the special surface treatment in XTRM columns.• XTRM columns will not break under stress.
• CH-1-XTRM• CH-5-XTRM• CH-SE54-XTRM• CH-17-XTRM
• CH-35-XTRM• CH-SE52-XTRM• CH-624-XTRM• CH-SimDis-XTRM
For dimensions and information of the phases listed above, please visit www.chrom4.com or ask your local distributor.
XTRM column phases available from Chrom4:
GC Columns
info@chrom4.com :: www.chrom4.com info@chrom4.com :: www.chrom4.com 91
ApplicationsCompound Column
Acetal - Ethyl Acetate CH-STAR-WAX
Acetic Acid monitoring CH-FFAP (inquire)
Alcohol Ethoxylates CH-5HT
Alkyl Naphthalens CH-5
Anaesthetics Basic Drugs CH-5
Aroclor 1254 - 1260 PCBs Quick Screening CH-5
Basic Drugs Underivatized CH-5
Benzene aromatic volatile compounds in air CH-STAR-WAX
Benzyl Alcohol impurities CH-FFAP (inquire)
Bergamot Oil FAST-GC CH-1701
Bergamot Oil FAST-GC CH-WAX (inquire)
Biodiesel - EN 14105 - ASTM D6584 CH-BIO
Biodiesel FAMEs CH-BIO
Biodiesel Glycerin - Triglycerides CH-BIO
Blood Alcohol (Headspace) CH-BAC1 & CH-BAC2
Blood Alcohols - HS CH-BAC1 & CH-BAC2
Blood Alcohols - HS dual column CH-BAC1 & CH-BAC2
BTEX FAST-GC CH-624
Butter Triglycerides CH-1
Chamomile Essential Oil FAST-GC CH-STAR-WAX (inquire)
Chamomile Essential Oil FAST-GC Comparison CH-1701
Chlorinated Hydrocarbons CH-5 - EPA Method 612
Critical Flavor & Fragrances Compounds CH-FFAP
Cyclic Hydrocarbons CH-1
Determination of mineral oil hydrocarbons in vegetable oils
CH-1HT
Diethylene Glycol and Diols CH-FFAP
Dimethylanilines CH-STAR-WAX
Dioxins and Furans GC-MS CH-5MS
Drugs and Adulterants CH-5 (inquire by GC-MS)
Drugs of Abuse - Basic Drugs CH-1
Drugs of Abuse - Cannabinoids CH-1
Drugs Precursors CH-5
FAMEs (Fatty Acid Methyl Esters) C4 - C18 CH-STAR-WAX
FAMEs (Fatty Acid Methyl Esters) C6 - C24 CH-STAR-WAX
FAMEs (Fatty Acid Methyl Esters) Standard Mixture
CH-88
FAMEs (Fatty Acid Methyl Esters) Standard Mixture FAST-GC
CH-88 (inquire)
FAMEs and CLA isomers CH-88
FAMEs cis trans Isomers CH-88
Flavor & Fragrances Compounds CH-FFAP
Food Packaging Residual Solvents CH-1701
Fragrance Allergens FAST-GC CH-1701 (inquire)
Fragrance Allergens FAST-GC CH-STAR-WAX (inquire)
Free Acids CH-FFAP
Free Fatty Acids in Whisky CH-FFAP
Compound Column
Haloethers CH-5 - EPA Method 611-8110
Halogenated Volatiles CH-624 - EPA Method 551
Ketones CH-1
Natural Gas Hydrocarbons CH-1
Nitrogen-Phosphorus Pesticides Herbicides (Triazines)
CH-STAR-WAX EPA Method 619
Nitrosamines CH-5 - EPA Method 607
Nitrosamines CH-STAR-WAX
Olive Oil FAMEs (Fatty Acid Methyl Esters) Cis-Trans Isomers -
CH-88
Organic Acids CH-FFAP
Organochlorine Pesticides CH-5 - EPA Method 608-8081
Organophosphorus Pesticides CH-1 and CH-1701
PAH Polycyclic Aromatic Hydrocarbons CH-PAH - EPA Method 610-8100
PAHs CH-5MS - EPA 610 - 8100 - 8270
PAHs CH-PAH (inquire) EPA Methods 610 - 8100 - 8270
PAHs CH-PAH (inquire)
PAHs EPA 8270 - Helium Carrier Gas CH-PAH
PAHs FAST-GC CH-PAH (inquire)
Pesticides FAST-GC CH-1701 (inquire)
Phenols CH-1
Phenols CH-5 - EPA Method 604
Phthalate Esters CH-1 - EPA Method 606
Purgeable Aromatics CH-STAR-WAX EPA Method 602
Residual Solvents UPS 467 CH-624
Serum Volatiles Control CH-BAC1
Solvents CH-WAX
Sulfur compounds in coffee aroma CH-FFAP
USP 467 Residual Solvents (OVIs) FAST-GC Headspace
CH-624 (inquire) (G43 Phase)
VOCs in Drinking Water CH-624 - EPA Method 524-3
Vodka CH-STAR-WAX
Volatile Acidic Compounds CH-FFAP
Volatile Free Acids CH-FFAP
Whisky direct split injection CH-624
Xylene Isomers CH-FFAP
92 info@chrom4.com :: www.chrom4.com
FUTURE DEVELOPMENTS:
Electron Mult ip l iers
(U) HP LC-MS Columns:
ISOSCELESP E L L I C U L A R C O R E
uattro
DT-2300A(Agi lent GC-MS)
Biol ink: Durable U(H)PLC Fit t ings
Bulk Si l ica
Sample Transfer
DataM8Riks Ritter Robot ic Tips
top related