Introduction - Obrnuta faza

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats

2 [email protected] :: www.chrom4.com

IntroductionAt Chrom4 we are known for our world class products.

Our Sample Handling line is one of the most extensivelines available in the chromatography industry.

We have top notch quality suppliers for vials, caps and inserts as well asPorvairʼsandRitterʼsexcellentlines of 96-well plates and mats.

Our vials are produced under the most stringentconditions with highly sophisticated productiontechnology out of 1st hydrolytic class glass.Only Schott glass is used as raw material, which results in an outstanding product.

Quality control and inspection Opto-electronic (photocamera)devices on the glass machines measure within fractions of a second, whether the vial meets our specifications. A second photo camera inspection checks for cosmetic errors (cracks,chips)intheglass.

Length gauging equip-ment measures dimensional specifications inaddition to the camera inspection.

When a vial is not according to specification, it automatically goes to waste.The vials are packed in a cleanroom, therefore avoiding any chance of contamination.

A manual random inspection and a final inspection to ISO and other quality standards assure you of a great, problem free and reliable product.

We only supply caps from the main manufacturers, who supply 90% of the industry and we consider this the standard.

Our cap manufacturers also use photo camera inspection.

We carry a wide variety of caps enabling you to choose what is right for your applications.

We believe we supply the highest quality product available in our industry.

Constant improvement on existing products, such as quality, packaging, etc. are part of our policy to service you better.This will provide you high quality products with a price/performance ratio enabling better control of your consumables budget.We showcase a large number of new products to make your sample handling in the lab more efficient.

Our other sample handling products, such as inserts, high recovery vials, 96-well plates and mats havethe same stringent quality procedures duringmanufacturing.We are proud to serve you. If you would like to receive samples of our sample handling products, please contact us.

We have highlighted our most popular items for your convenience.

Septum Material Compatible with Resealability Max Temp

Rubber(Natural or Butyl)

ACN, acetone, DMF, alcohols, diethy-lamine, DMSO, phenols

Excellent <100°C

PTFE/Natural or Butyl Rubber

PTFE resistance until punctured, then septa or liner will have compatibility of rubber

Good <100°C

Silicone/Silicone Rubber

Alcohol, acetone, ether, DMF, DMSO Excellent <200°C

PTFE/Silicone, PTFE/Silicone/PTFE

PTFE resistance until punctured, then septa or liner will have compatibility of silicone

Average <200°C

VITONChlorinated solvents, benzene, toluene, alcohols, hexane, heptane

Good <260°C


[email protected] :: www.chrom4.com [email protected] :: www.chrom4.com 3

Agilent™ Compatible

PART NO. (100pk) DESCRIPTIONSmall OpeningVT011-1232 2mL Clear Glass Vial -Large OpeningVT011L-1232 2mL Clear Glass Crimp Vial 5183-4491/5181-3375VT011LM-1232 2mL Clear Glass Crimp Vial w/marking spot 5183-4492/5182-0543VT11LM-1232A 2mL Amber Glass Crimp Vial w/marking spot 5181-3376/5183-4493

• Our glass products are borosilicate USP class 1• Strain point : 565°C• Please note that some manufacturers refer to

2mL vials as 1.5mL or 1.8mL

Our recommended vials, caps and inserts are specifically designed and made for Agilent™ compatible autosamplers.In general, Agilent™ autosamplers use a 9mm thread screw vial (sometimescalledROBOorDPvial).

These vials require a 9-425 screw cap, available in various colours for colour-coding of yoursamples(seepages5-6).For Biopharma applications, we recommend a PTFE/Silicone liner.Most of Agilent™ GC and some LC applications use 11mm crimp vials with an 11mm aluminum crimp cap available in 5 colours (see page4).Some chemists prefer a snap vial, which requires a 11mm snap cap. For snap vials and caps see page 7-8.For 8mm crimp vials and Headspace vials, please refer to page 9 and page 25 respectively.

Agilent™ Autosampler Products

Ordering Information - 2mL Crimp Vials, 12 x 32mm, 11mm Opening

Ordering Information - Inserts

Crimp Vials, Caps and Inserts

PART NO. (100pk) DESCRIPTIONI005BS-625 50µL Glass LV Insert with Bottom Spring* -I025BS-629 250µL Glass Conical Insert with Bottom Spring 5181-1270I025PBS-629 250µL Polypropylene Insert with Bottom Spring -I025-531 250µL Glass Flat Bottom Insert for 2mL small opening Crimp Vials -I025-630 350µL Glass Flat Bottom Insert for 2mL LO Crimp Vials 5181-3377I025GF-631 250µL Glass BM Hanging Conical Point Insert -I025CP-631 250µL Conical Point Glass Insert, 6 x 31mm for 2mL LO Crimp Vials 5183-2085

Small Opening Large Opening

VT011-1232

VT011L-1232

VT011LM-1232

VT011LM-1232A

I025PBS-629

I025BS-625

I025-630 I025-531 I025GF-631

I025CP-631

I025BS-629

*Please note that 50µL glass inserts actually hold a larger volume

See page 22 for our QC certified vials. The best verification in the industry.

Agilent™ Compatible Part





Ordering Information - 11mm Aluminum Crimp Caps with Septa

Crimpers & Decappers see page 24

PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part

C142-11 11mm Silver Crimp Cap, PTFE/Butyl Rubber 5183-4498

C141-11B 11mm Blue Crimp Cap, PTFE/Synthetic 5181-1215C141-11G 11mm Green Crimp Cap, PTFE/Synthetic 5181-1216C141-11Go 11mm Gold Crimp Cap, PTFE/Synthetic -

C141-11R 11mm Red Crimp Cap, PTFE/Synthetic 5181-1217C150-11 11mm Silver Crimp Cap, PTFE/Silicone 5183-4500/5182-0552C160-11 11mm Silver Crimp Cap, PTFE/Silicone/PTFE 5183-4499/5181-1211C170-11 11mm Magnetic Crimp Cap, PTFE/Silicone -

C190-11 11mm Silver Crimp Cap, Red PTFE/White Silicone with Slit -

C141-11GOC190-11

C141-11G

C141-11B C142-11

C150-11 C170-11

C141-11R

C160-11




Ordering Information - 2mL Screw Vials, 12 x 32mm, 9mm thread

Screw Vials, Caps and Inserts for Agilent™ robotic arm 1090, 1100, 1200

*Please note that 50µL glass inserts actually hold a larger volume

PART NO. (100pk) DESCRIPTIONVT009-1232 2mL Clear Glass Screw Vial 5182-0714/5183-2067

VT009M-1232 2mL Clear Glass Screw Vial with Marking Spot 5182-0715/5183-2068

VT009M-1232A 2mL Amber Glass Screw Vial with Marking Spot 5182-0716/5183-2069

VT009M-1232S 2mL Clear Glass Screw Vial with Marking Spot, Silanized 5183-2071

V0309P-1232V0159P-1232

300µL PP Short Thread Micro Vial, 12 x 32mm 2mL PP Short Thread Screw Vial with graduated volume, 12 x 32mm

-

-

PART NO. (100pk) DESCRIPTIONI005BS-625 50µL Glass LV Insert with Bottom Spring* -

I025BS-629 250µL Glass Conical Insert with Bottom Spring 5181-1270I025BS-629S 250µL Glass Conical Insert with Bottom Spring, Silanized 5181-8872I025PBS-629 250µL Polypropylene Insert with Bottom Spring -I025-630 350µL Glass Flat Bottom Insert 5181-3377I025GF-631 250µL Glass BM Hanging Conical Point Insert -I025CP-631 250µL Conical Point Glass Insert, 6 x 31mm for 2mL WM Crimp Vials 5183-2085


VT009-1232V0159P-1232

VT009M-1232

VT009M-1232A

I025CP-631I025PBS-629

I025BS-629

I025-630






Ordering Information - 9mm Screw Caps with Septa*

C39E-09B

C394E-09XG

C394E-09R

C395E-09XY

C395E-09R

C395E-09G

C395E-09B

C396-09SB

C397E-09B

Combi-Kits available. See pages 23.

*Slitted cap recommended for UHPLC

Ask us for our convenient & transparent Combi-Kit.

Combi-Kits consist of 100 vials and 100 matching caps.

PART NO. (100pk) DESCRIPTIONC394E-09B 9mm Ribbed Blue Screw Cap, FEP/ButylRubber 5182-0717C394E-09G 9mm Ribbed Green Screw Cap, FEP/ButylRubber 5182-0718C394E-09R 9mm Ribbed Red Screw Cap, FEP/ButylRubber 5182-0719

9mm Ribbed Blue Screw Cap, PTFE/Silicone

9mm Smooth Blue Screw Cap, PTFE/Silicone

5182-0720

5182-0720

C395E-09G

C395E-09SG

9mm Ribbed Green Screw Cap, Red PTFE/White Silicone

9mm Smooth Green Screw Cap, Red PTFE/White Silicone

5182-0721

5182-0721

C395E-09R 9mm Ribbed Red Screw Cap, Red PTFE/White Silicone 5182-0722C395E-09Y 9mm Ribbed Yellow Screw Cap, Red PTFE/White Silicone -C395EB-09SBL 9mm Ribbed Black Screw Cap, Blue PTFE/White Silicone -

C396-09SB 9mm Smooth Blue Screw Cap, PTFE/Silicone/PTFE 5182-0723C396-09SG 9mm Smooth Green Screw Cap, PTFE/Silicone/PTFE 5182-0724C396-09SR 9mm Smooth Red Screw Cap, PTFE/Silicone/PTFE 5182-0725C396-09SY 9mm Smooth Yellow Screw Cap, PTFE/Silicone/PTFE -C397E-09B 9mm Ribbed Blue Screw Cap, Red PTFE/White Silicone with Slit* 5183-2076C397E-09R 9mm Ribbed Red Screw Cap, Red PTFE/White Siliconee with Slit* 5183-2078C397E-09G 9mm Ribbed Green Screw Cap, Red PTFE/White Silicone with Slit* 5183-2077C397E-09Y 9mm Ribbed Yellow Screw Cap, Red PTFE/White Silicone with Slit* -

C397E-09SB 9mm Smooth Blue Screw Cap, Red PTFE/White Silicone with Slit* 5183-2076C397E-09SR 9mm Smooth Red Screw Cap, Red PTFE/White Silicone with Slit* 5183-2078

C395E-09B

C395E-09SB





Ordering Information - 2mL Snap Vials, 12 x 32mm, 11mm Opening

Snap Vials, Caps and Inserts

No matter what chromatography vial, cap or insert you are looking forChrom4 carries it!

* Please note that 50µL glass inserts actually hold a larger volume

PART NO. (100pk) DESCRIPTION2mL Clear Glass Snap Vial with Marking Spot 5182-2068/5182-0546

VT11SM-1232A 2mL Amber Glass Snap Vial with Marking Spot 5181-0545/5181-2069

V0111P-1232 100µL LVV Crimp/Snap Ring Vial, 11mm thread 9301-0977V0300P-1232 300µL Conical, Ultraclean Polypropylene, Snap/Crimp Top 5183-2087V0711P-1232 750µL Conical LVV Vial, Polypropylene, Snap/Crimp Top 5183-4731

PART NO. (100pk) DESCRIPTIONI005BS-625 50µL Glass LV Insert with Bottom Spring* -

I025BS-629 250µL Glass Conical Insert with Bottom Spring 5181-1270I025BS-629S 250µL Glass Conical Insert with Bottom Spring, Silanized 5181-8872I025PBS-629 250µL Polypropylene Insert with Bottom Spring -I025-630 350µL Glass Flat Bottom Insert 5181-3377I025GF-631 250µL Glass BM Hanging Conical Point Insert -


V0300P-1232

VT011SM-1232

VT11SM-1232A

I025PBS-629

I025BS-629

I025-630

VT011SM-1232






Ordering Information - 11mm Snap Caps with Septa

PART NO. (100pk) DESCRIPTION

C240-11 11mm Natural Snap Cap with PTFE/Butyl Rubber 5182-0550

11mm Blue Snap Cap with Red PTFE/White Silicone C250CS-11 11mm Natural Snap Cap with PTFE/Silicone C250PBS-11 11mm Blue Snap Cap with Clear PTFE/Blue Silicone -

C260S-11 11mm Blue Snap Cap with Red PTFE/White Silicone/Red PTFE

C270BS-11 11mm Blue Snap Cap with Red PTFE/White Silicone Slitted -C270CS-11 11mm Clear Snap Cap with Red PTFE/White Silicone Slitted -C270CBS-11 11mm Clear Snap Cap with Blue PTFE/White Silicone Slitted -C270CBS-11X 11mm Clear Snap Cap with Blue PTFE/White Silicone with Cross Slit -

C299-11 11mm Natural Snap Cap with 6mills Foil -

C240-11

C240-11BL C250-11

C250-BS11

C260-11

C250-BS11N/A

C270CS-11

N/A

N/A

Looking for headspace vials for your Agilent™ autosampler? See page 25 for headspace vials and caps.

C250BS-11

* Note: For analytes where PTFE interferes with the sample, such as PFOS, PFOA etc., used in combination with V0300P-1232

5182-05415182-3458

5182-0560

V06020-2338X

VX0020-2346X

VXX020-2375XP

CLS-0030

CLS-9508

CLS-9980





Ordering Information - MicrovialsMicrovials and Caps


V0308-632 300µL Clear Round Bottom Glass Crimp Vial, 8mm -

V1111-1232 1.1mL Clear Tapered Bottom Glass Crimp Vial, 11mm -

V1108-1232 1.1mL Clear Tapered Bottom Glass Screw Vial, 8-425 -

V01511-1232 1.5mL Clear Glass Crimp V-Vial, 12 x 32mm, 11mm 5184-3551V01511-1232A 1.5mL Amber Glass Crimp V-Vial, 12 x 32mm, 11mm 5184-3555V01511S-1232 1.5mL Clear Glass Snap/Crimp V-Vial, 12 x 32mm, 11mm 5184-3552V01511S-1232A 1.5mL Amber Glass Snap/Crimp V-Vial, 12 x 32mm, 11mm 5184-3556V01508-1232 1.5mL Clear Glass Screw V-Vial, 12 x 32mm, 8mm -V01508-1232A 1.5mL Amber Glass Screw V-Vial, 12 x 32mm, 8mm -V01509-1232 1.5mL Clear Glass Screw V-Vial, 12 x 32mm, 9mm 5184-3550V01509-1232A 1.5mL Amber Glass Screw V-Vial, 12 x 32mm, 9mm 5184-3554VB311C-1232 2mL Clear Crimp Vial, Fused in 300µL insert 9301-1388V0708-840 700µL Clear Flat Bottom Crimp Vial, 8mm -V0708-840A 700µL Amber Tapered Bottom Crimp Vial, 8mm -

V01511-1232A

V01511S-1232

V01511S-1232A

V01509-1232A

For 9mm screw caps refer to page 6. For 11mm crimp caps refer to page 4.

Ordering Information - 8mm Crimp Caps with SeptaPART NO. (100pk) DESCRIPTION

C141-08 8mm Silver Crimp Cap, PTFE/ Natural Rubber -C150P-08EZ 8mm Silver Crimp Cap, Red PTFE/White Silicone -

C190P-08 8mm Silver Crimp Cap, Red PTFE/White Silicone with Slit -

V0308-632 V0708-840A

V1111-1232V1108-1232

VB311MC-1232

C141-08 C150P-08E2 C180-08

VB311M-1232

V01509-1232

V01511-1232





Beckman/Hitachi

• Our glass products are borosilicate USP class 1• Strain point : 565° C• Please note that some manufacturers refer to


Our recommended vials, caps and inserts are specifically designed and made for Spark(Holland) autosamplers, which Beckman (as well as Bruker) is outfitted with.

Beckman autosamplers use a 8mm thread screw vial.These vials require a 8-425 screw cap, available in various colours for colour-coding of your samples. For Biopharma applications, we recommend a PTFE/Silicone liner. Most chemists prefer 10mm Bruker autosampler vials (see page 11). Wide mouth vials (VT010M-1232) and caps w/PTFE septa (C06050BC-10). Also available in a clamshell.

Ordering Information - 2mL Screw Vials, 12 x 32mm, 8mm Opening

Screw Vials, Caps and Inserts

Beckman Autosampler Products

PART NO. (100pk) DESCRIPTIONVT008M-1232 2mL Clear Glass Screw Vial with Marking SpotVT008M-1232A 2mL Amber Glass Screw Vial with Marking Spot

PART NO. (100pk) DESCRIPTIONI01-531 100µL Glass LV Insert, Conical Point, No SpringI01BS-530 100µL Glass LV Insert, Conical Precision Point, Plastic Bottom SpringI025-531 250µL Glass Flat Bottom Insert


VT008M-1232

VT008M-1232A

Ordering Information - 8mm Screw Caps with SeptaPART NO. (100pk) DESCRIPTIONCLS39939 8mm Open Hole Black PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08R 8mm Open Hole Red PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08Y 8mm Open Hole Yellow PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08W 8mm Open Hole White PP Screw Cap, 8-425 Red PTFE/Silicone

I01-531

I01BS-530

I025-531

C9SF-08Y

CLS39939

Compatible



TechComp (Formerly Bruker/Varian)

Ordering Information - 10mm Screw Caps w/Septa

Ordering Information - 2mL Screw Vials, 12 x 32mm, 10mm OpeningScrew Vials, Caps and Inserts

• Our glass products are borosilicate USP class 1 • Strain point : 535° C• Please note that some manufacturers refer to


Our recommended vials, caps and inserts are specifically designed and made for Marathon Spark(Holland) autosamplers, which TechComp LCʼs are outfitted with.TechComp autosamplers use a 8mm thread screw vial as well as the more convenient 10mm thread screw vials (sometimes called ABC or Wide Mouth vial).

Most chemists prefer 10mm wide mouth vials (VT010M-1232) and caps w/PTFE septa (C06050BC-10).Also available in a clamshell.For Biopharma applications, we recommend a PTFE/Silicone liner.

TechComp Autosampler Products


PART NO. (100pk) DESCRIPTIONVT010M-1232 2mL Clear Big Mouth Glass Screw Vial with Marking SpotVT010M-1232A 2mL Amber Big Mouth Glass Screw Vial with Marking Spot


C06050-10 10mm Black Open-Hole Screw Cap, Tan PTFE/Silicone 60mil

PART NO. (100pk) DESCRIPTIONI005BS-625 50µL Glass LV Insert with Bottom Spring*I025BS-629 250µL Glass Conical Insert with Bottom SpringI025-630 350µL Glass Flat Bottom InsertI025GF-631 250µL Glass BM Hanging Conical Point InsertI025PBS-629 250µL Polypropylene Insert with Bottom Spring


C06050-10S

C06050-10

For insert images refer to page 7

VT010M-1232

VT010M-1232A

Compatible



TechComp (Formerly Bruker/Varian)

Ordering Information - 1.1mL Screw/Crimp Microvial and Cap

Ordering Information - 8mm Screw Caps w/Septa

Ordering Information - 2mL Screw Vials, 12 x 32mm, 8mm OpeningPART NO. (100pk) DESCRIPTIONVT008M-1232 2mL Clear Glass Screw Vial with Marking SpotVT008M-1232A 2mL Amber Glass Screw Vial with Marking Spot



V1108-1232 1.1mL Clear Tapered Bottom Glass Screw Vial, 8-425V1111-1232 1.1mL Clear Tapered Bottom Glass Crimp Vial, 11mm


For 11mm crimp caps refer to page 4

VT008-1232

VT008M-1232

VT008M-1232AI01-531

I01BS-530

I025-531

PART NO. (100pk) DESCRIPTIONCLS39939 8mm Open Hole Black PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08R 8mm Open Hole Red PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08Y 8mm Open Hole Yellow PP Screw Cap, 8-425 Red PTFE/SiliconeC9SF-08W 8mm Open Hole White PP Screw Cap, 8-425 Red PTFE/Silicone

C9SF-08Y

CLS39939

Compatible



CTC/LEAP

• Wide opening enables easy filling with viscousmaterials

• Improved label with filling lines makes handlingeasier

• Convenience Packs available

CTC/LEAP Autosampler Products

Ordering Information - Clear Glass Inserts


VT009-1232 2mL Clear Glass Screw VialVT009M-1232 2mL Clear Glass Screw Vial with Marking SpotVT009M-1232A 2mL Amber Glass Screw Vial with Marking SpotVT009M-1232S 2mL Clear Glass Screw Vial with Marking Spot, Silanized

PART NO. (100pk) DESCRIPTIONI025BS-629 250µL Glass Conical Insert with Bottom SpringI025-630 350µL Glass Flat Bottom InsertI025GF-631 250µL Glass BM Hanging Conical Point Insert

I025BS-629I025GF-631

I025-630

Screw Vials, Caps and InsertsOrdering Information - 2mL Short Thread Screw Vials, 12 x 32mm, 9mm Opening

VT009-1232VT009M-1232

VT009M-1232A

Compatible



CTC/LEAP

C39E-09B

C394E-09XG

C394E-09R

C395E-09XY

C395E-09R

C395E-09G

C395E-09B

C396-09SB

C397E-09B

*Slitted cap recommended for UHPLC

Ordering Information - 9mm Screw Caps with Septa*PART NO. (100pk) DESCRIPTION Agilent™ HP Part

C394E-09B 9mm Ribbed Blue Screw Cap, FEP/ButylRubber 5182-0717C394E-09G 9mm Ribbed Green Screw Cap, FEP/ButylRubber 5182-0718C394E-09R 9mm Ribbed Red Screw Cap, FEP/ButylRubber 5182-0719

9mm Ribbed Blue Screw Cap, PTFE/Silicone

9mm Smooth Blue Screw Cap, PTFE/Silicone

5182-0720

5182-0720

C395E-09G

C395E-09SG

9mm Ribbed Green Screw Cap, Red PTFE/White Silicone

9mm Smooth Green Screw Cap, Red PTFE/White Silicone

5182-0721

5182-0721

C395E-09R 9mm Ribbed Red Screw Cap, Red PTFE/White Silicone 5182-0722C395E-09Y 9mm Ribbed Yellow Screw Cap, Red PTFE/White Silicone -C395EB-09SBL 9mm Ribbed Black Screw Cap, Blue PTFE/White Silicone -

C396-09SB 9mm Smooth Blue Screw Cap, PTFE/Silicone/PTFE 5182-0723C396-09SG 9mm Smooth Green Screw Cap, PTFE/Silicone/PTFE 5182-0724C396-09SR 9mm Smooth Red Screw Cap, PTFE/Silicone/PTFE 5182-0725C396-09SY 9mm Smooth Yellow Screw Cap, PTFE/Silicone/PTFE -C397E-09B 9mm Ribbed Blue Screw Cap, Red PTFE/White Silicone with Slit* 5183-2076C397E-09R 9mm Ribbed Red Screw Cap, Red PTFE/White Siliconee with Slit* 5183-2078C397E-09G 9mm Ribbed Green Screw Cap, Red PTFE/White Silicone with Slit* 5183-2077C397E-09Y 9mm Ribbed Yellow Screw Cap, Red PTFE/White Silicone with Slit* -

C397E-09SB 9mm Smooth Blue Screw Cap, Red PTFE/White Silicone with Slit* 5183-2076C397E-09SR 9mm Smooth Red Screw Cap, Red PTFE/White Silicone with Slit* 5183-2078

C395E-09B

C395E-09SB

Compatible



CTC/LEAP

CTC/LEAP Headspace VialsOrdering Information - Screw Headspace Vials & Caps

Ordering Information - Crimp Headspace & SPME Vials & Caps

PART NO. (100pk) DESCRIPTIONVX0018-2346CTC 10mL Clear Glass Screw Vial, 23 x 46mm, 18-425VXX018-2375CTC 20mL Clear Headspace Glass Screw Vial, 23 x 75mm, 18-425

Ordering Information - Pre-assembled 18mm Magnetic Screw CapPART NO. (100pk) DESCRIPTIONCHR-1309 18mm Magnetic Silver Screw Cap, Silicone Blue Transparent/PTFE WhiteCHR-1414 18mm Magnetic Silver Screw Cap, PTFE White/Silicone BlueCHR-1416 18mm Magnetic Silver Screw Cap, Butyl Red/PTFE Grey


VX0020B-2346X 10mL Clear Headspace Glass Crimp Vial, 23 x 46mm, Rounded BottomVXX020B-2375X 20mL Clear Headspace Glass Crimp Vial, 23 x 75mm, Rounded BottomVXX020SPME-2375 20mL SPME Clear Headspace Glass Crimp Vial, 23 x 75mm, Rounded Bottom

Ordering Information - Pre-assembled 20mm Magnetic Crimp Cap

PART NO. (100pk) DESCRIPTIONCLS-1535B 20mm Blue BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1536G 20mm Green BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1536GO 20mm Gold BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1535R 20mm Red BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1536S 20mm Silver BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil

CLS-1535B CLS-1536GCLS-1536GO

CLS-1535R CLS-1536S

CLS-1309CLS-1414

CLS-1416

VX0018-2346S

VX0018A-2346S

VX0018-2375S

VX0020B-2346X

VXX020B-2375X

Compatible



Perkin Elmer

2mL screw vials for Autosystem GC only. Some customers prefer a 9mm vial for this application.For 9mm vials see page 6.

• Our glass products are borosilicate USP class 1 • Strain point : 565°C• Please note that some manufacturers refer to

2mL vials as 1.5mL or 1.8mm

Our recommended vials, caps and inserts are specifically designed and made for Perkin Elmer autosamplers.Perkin Elmer autosamplers use a variety of screw and/or crimp vials.

In our list of vials below, we have tried to be as complete as possible, however if you have any questions please do not hesitate to call us.Perkin Elmer headspace autosamplers require a special rounded bottom/ beveled top vial. Please see page 26 for these vials and the corresponding caps.


Screw Vials, Caps and Inserts

Perkin Elmer Autosampler Products


VT008M-1232 2mL Clear Glass Screw Vial with Marking SpotVT008M-1232A 2mL Amber Glass Screw Vial with Marking Spot



VT008-1232

VT008M-1232

VT008M-1232A

I01-531

I01BS-530

I025-531

C9SF-08Y

CLS39939


Compatible



Perkin Elmer

Ordering Information - 2mL Snap Vials, 12 x 32mm, 11mm Opening

Snap Vials, Caps and Inserts


PART NO. (100pk) DESCRIPTIONVT011SM-1232 2mL Clear Glass Snap Vial with Marking SpotVT11SM-1232A 2mL Amber Glass Snap Vial with Marking SpotV0111P-1232 100µL LVV Crimp/Snap Ring Vial, 11mm threadV0300P-1232 300µL Conical, Ultraclean Polypropylene, Snap/Crimp TopV0711P-1232 750µL Conical LVV Vial, Polypropylene, Snap/Crimp Top

PART NO. (100pk) DESCRIPTIONI005BS-625 50µL Glass LV Insert with Bottom Spring*I025BS-629 250µL Glass Conical Insert with Bottom SpringI025PBS-629 250µL Polypropylene Insert with Bottom SpringI025-630 350µL Glass Flat Bottom InsertI025GF-631 250µL Glass BM Hanging Conical Point Insert


V0300P-1232

VT011SM-1232

VT011SM-1232A

Snap vials & caps fit Autosystem GC, AI-1, Integral 4000, ISS-100 & ISS-200, LC 600(60), 420/b and4900.For the above mentionedautosamplers, you can use snap vials and caps or small opening 11mm crimp vials (see page 3).

Ordering Information - 8mm Crimp Vials

PART NO. (100pk) DESCRIPTIONV0308-632 300µL Clear Round Bottom Glass Crimp Vial, 8mmV0708-840 700µL Clear Flat Bottom Glass Crimp Vial, 8mmV0708M-840A 700µL Amber Tapered Bottom Glass Crimp Vial, 8mm with GraduationV0808-840 1.2mL Clear Glass Crimp Vial, 8mm

Crimp Vials, Caps

Ordering Information - 8mm Crimp CapsPART NO. (100pk) DESCRIPTIONC141-08 8mm Silver Crimp Cap, PTFE/ Natural RubberC150P-08EZ 8mm Silver Crimp Cap, PTFE/ Silicone

Perkin Elmer headspace vials on page 26

8mm flat bottom vials and caps fit AS-100, 100B, 300, 8300 and AI-1 autosamplers

V0308-632 V0608-840A

V0708-840A

V0808-830

C141-08 C150P-08 C180-08

For insert images refer to page 3. For snap caps refer to page 8.

Compatible



Shimadzu

• Our glass products are borosilicate USP class 1 • Strain point : 565°C• Please note that some manufacturers refer to


Our recommended vials, caps and inserts are designed to fit Shimadzu autosamplers. Shimadzu autosamplers can take 2mL screw cap vials, 2mL crimp cap small opening vials or 4mL screw vials.Below you will find a guideline for the various types of autosamplers.

Shimadzu Autosampler Products

Shimadzu autosampler vials to fit : AOC-8B/9,SIL-6A, OC-14/1400, SIL-6B & SIL-9A


4mL Screw Vials, 15 x 45mm, 13mm Opening and Pre-assembled Caps and SeptaShimadzu autosampler vials to fit :AOC-14/1400 & SIL-2AS

For corresponding inserts please see page 21, Waters 4mL vials

PART NO. (100pk) DESCRIPTIONVT008M-1232 2mL Clear Glass Screw Vial w/ Marking SpotVT008M-1232A 2mL Amber Glass Screw Vial w/ Marking Spot

<-

PART NO. (100pk) DESCRIPTIONVF013-1545 4mL Clear Screw Glass Vial, 13-425VF013A-1545 4mL Amber Screw Glass Vial, 13-425C06050-13 13mm Black Open-Hole Bonded Screw Cap, Red PTFE/Silicone 60mil

<-

VF013-1545

VF013A-1545

VF013MM-1545

VF013MA-1545C06050-13

C9SF-08Y

CLS39939

Ordering Information


Compatible



Shimadzu

Ordering Information - 2mL Crimp Vials, 12 x 32mm, 11mm Opening

PART NO. (100pk) DESCRIPTIONVT011-1232 2mL Clear Glass Crimp Vial

Shimadzu autosampler vials to fit: AOC-14/1400, SIL-6B & SIL-9A

VT011-1232 VT011A-1232

Ordering Information - 11mm Aluminum Crimp Caps with Septa

Crimpers & Decappers see page 24

PART NO. (100pk) DESCRIPTION Agilent™ HP Part

C142-11 11mm Silver Crimp Cap, PTFE/Butyl Rubber 5183-4498

C141-11B 11mm Blue Crimp Cap, PTFE/Synthetic 5181-1215C141-11G 11mm Green Crimp Cap, PTFE/Synthetic 5181-1216C141-11GO 11mm Gold Crimp Cap, PTFE/Synthetic -

C141-11R 11mm Red Crimp Cap, PTFE/Synthetic 5181-1217C150-11 11mm Silver Crimp Cap, PTFE/Silicone 5183-4500/5182-0552C160-11 11mm Silver Crimp Cap, PTFE/Silicone/PTFE 5183-4499/5181-1211C170-11 11mm Magnetic Crimp Cap, PTFE/Silicone -

C190-11 11mm Silver Crimp Cap, Red PTFE/White Silicone with Slit -

C141-11GOC190-11

C141-11G

C141-11B C142-11

C150-11 C170-11

C141-11R

C160-11

Compatible



Waters

• Our glass products are borosilicate USP class 1 • Strain point : 535°C• 4mL (1 dram ) screw vial and 1mL shell vial for

respective 48 and 96 position carousel• Please note that some manufacturers refer to


The Waters Alliance 2690/95, 2790/95 and Acquity use a 2mL 9mm screw thread vial. Some chemists prefer a wide mouth (sometimes called ABC) vial.With a 9mm opening vial (VT009 Series) most chemists use the 9mm cap w/PTFE septa (C395-09B and C395S-09B). For Waters Acquity™ we recommend the slitted cap (C397-09B andC397S-09B).Also available in a clamshell.The Waters Wisp equipment uses a 4mL screw or 1mL shell vial.

Waters Autosampler Products

Ordering Information - 2mL Screw Vials, 12 x 32mm, 9mm Thread

Ordering Information - 9mm Screw Caps with Septa*

PART NO. (100pk) DESCRIPTION Waters PartVT009-1232 2mL Clear Glass Screw Vial -

-

VT009M-1232 2mL Clear Glass Screw Vial with Marking Spot 186000273VT009M-1232A 2mL Amber Glass Screw Vial with Marking Spot 186000848VT009M-1232S 2mL Clear Glass Screw Vial with Marking Spot, Silanzed WAT063300DV

PART NO. (100pk) DESCRIPTION Waters PartC394-09B 9mm Blue Screw Cap, PTFE/ButylRubber, Bonded -C394-09G 9mm Green Screw Cap, PTFE/ButylRubber, Bonded -C394-09R 9mm Red Screw Cap, PTFE/ButylRubber, Bonded -C394-09Y 9mm Yellow Screw Cap, PTFE/ButylRubber, Bonded -

C395S-09BC395-09B

9mm Blue Screw Cap, Beige PTFE/Silicone, Bonded9mm Blue Screw Cap, Beige PTFE/Silicone, Bonded

186000274186000274

C395S-09G 9mm Green Screw Cap, Beige PTFE/Silicone, Bonded 186002130C395S-09R 9mm Red Screw Cap, Beige PTFE/Silicone, Bonded -C395S-09Y 9mm Yellow Screw Cap, Beige PTFE/Silicone, Bonded -C396-09B 9mm Blue Screw Cap, PTFE/Silicone/PTFE, Bonded -C397-09B*** 9mm Blue Screw Cap, Red PTFE/Silicone with Slit Bonded* 186000305C397-09R*** 9mm Red Screw Cap, Red PTFE/Silicone with Slit Bonded* -C397S-09B*** 9mm Blue Screw Cap, Beige PTFE/Silicone with Slit Bonded* -C397S-09G*** 9mm Green Screw Cap, Beige PTFE/Silicone with Slit Bonded* -C397S-09R*** 9mm Red Screw Cap, Beige PTFE/Silicone with Slit Bonded*

*Slitted cap recommended for Waters UPLC™ and UHPLC

C394-09G C394-09R

C394-09BC395S-09G

C395S-09Y

C395S-09B

C396-09B

VT009-1232

VT009M-1232

VT009M-1232A

I025CP-631

I025PBS-629I025BS-629

I025-630

For ordering information see page 21

See page 22 for our QC certified vials.

V0159P-1232 2mL PP Short Thread Screw Vial with graduated volume, 12 x 32mm

V0159P-1232

Compatible



Waters

Ordering Information - 1mL Shell Vials, 8 x 40mm, with plug cap for Wisp

Waters Wisp 48 and 96 position

48-position tray*Also available as shell vial

Ordering Information - 4mL Screw Vials*, 15 x 45mm, 13mm Opening and Pre-assembled Caps and Septa

PART NO. (100pk) DESCRIPTION Waters Part

VF013-1545 4mL Clear Screw Glass Vial, 13-425 186000840VF013A-1545 4mL Amber Screw Glass Vial, 13-425 186001135C06050-13 13mm Black Open-Hole Bonded Screw Cap, Red PTFE/Silicone 60mil 186000841C360-13W 13mm White PP Closed Screw Cap, F217/PTFE -


I03-639 250µL Glass Mandrel Point Insert, Requires Metal Spring WAT072704I03-638X 250µL Glass Conical Insert, Requires Metal Spring WAT072708


V800-840C 1mL Clear Shell Vial & Plug QuickPack WAT025054CV800-840A 1mL Amber Shell Vial & Plug QuickPack WAT025053CV800-840S 1mL Amber Shell Vial & Plug QuickPack, Silanized -

PART NO. (100pk) DESCRIPTIONI01BS-530 100µL Glass LV Insert with Bottom SpringI01PBS-530 100µL PP LV Insert with Bottom SpringI025-629 250µL Mandrel Point Insert, Requires Metal SpringI025BS-629 250µL Glass Conical Insert with Bottom Spring

96-position tray


Inserts for 1mL Shell Vials

VE2078-1545

I03-639

I03-638X

C360-13W

For insert images refer to pages 7 and 20

For 4mL screw vial images, refer to page 18

PART NO. (100pk) DESCRIPTION Waters PartI005BS-625 50µL Glass LV Insert with Bottom Spring* -I025BS-629 250µL Glass Conical Insert with Bottom Spring WAT094170I025PBS-629 250µL Polypropylene Insert with Bottom Spring -I025-630 350µL Glass Flat Bottom Insert -I025GF-631 250µL Glass BM Hanging Conical Point Insert -I025CP-631 250µL Conical Point Glass Insert, 6 x 31mm for 2mL WM Crimp Vials -



Compatible




LC Certified Combi-KitsDue to customer requests, Chrom4 is now providing QC Certified vial and cap Combi-Kits.

These certified Combi-Kits are identical to the Combi-Kits found on page 23 of the Sample Handling section of this cat-alogue, but will include certificiation documentation.

Every batch of LC certified Combi-Kits is tested on 16 critical parameters. The vial and cap combinations are checked for blanks and contamination by HPLC/UV and LC-MS testing.

Certified Combi-Kits include the batch-specific test results and the HPLC/LC-MS chromatograms.

The LC certified Combi-Kit components are shipped shrinkwrapped to ensure purity, transport and end user safety.

Certified Combi-Kits are available in a 2mL Short Thread clear and amber vial with appropriate cap.

Other Chrom4 certified Combi-Kits are available on request.

Ordering Information - Combi-Kit - Not assembled (Cap in separate compartment)PART NO. (100pk) DESCRIPTION9mm 9-425 ThreadFor Agilent Auto SamplersVT009M/C395ESBCERT HPLC/LC-MS Certified 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone

VT009MA/C395ESBCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone

For Agilent Auto SamplersVT009M/C397ESBCERT HPLC/LC-MS Certified 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone w/ Slit*

VT009MA/C397ESBCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone with Slit*

For Waters Auto SamplersVT009M/C395BCERT HPLC/LC-MS Certified 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Bonded

VT009MA/C395BCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Bonded

For Waters Auto SamplersVT009M/C397BCERT HPLC/LC-MS Certified 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded w/Slit*

VT009MA/C397BCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded w/Slit*



LC Certified Combi-Kits - Test parametersCleanVial• Glass- Hydrolytic Class 1;51

expansion Borosilicate;meets all requirementsof Phrm. US, EU, JPN;class 10.000 cleanroom standard

• Height• Diameter• Bottom Thickness• Neck Length• Thread Profile• Annealing

CleanCap• Diameter• Height• Thread Integrity• Septa Bonding• Sealing/Resealing Test • Extractables

Chemical Test Non-volatile Residue• HPLC UV Test• LC-MS Test



Combi-Kits - Vial and Cap

Ordering Information - Vials and Caps - Not assembled (Cap in separate compartment)

PART NO. (100pk) DESCRIPTION9mm 9-425 ThreadFor Agilent Auto SamplersVT009/C395ESB 2mL Clear Screw Vial, Blue Cap, Red PTFE/White Silicone, Combi-KitVT009M/C395ESB 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Combi-KitVT009MA/C395ESB 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Combi-Kit

For Agilent Auto SamplersVT009/C397ESB 2mL Clear Screw Vial, Blue Cap, Red PTFE/White Silicone with Slit, Combi-KitVT009M/C397ESB 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone with Slit*, Combi-KitVT009MA/C397ESB 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone with Slit*, Combi-Kit

For Waters Auto SamplersVT009/C395B 2mL Clear Screw Vial, Blue Cap, Red PTFE/White Silicone, Bonded, Combi-KitVT009M/C395B 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Bonded, Combi-KitVT009MA/C395B 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Bonded, Combi-Kit

For Waters Auto SamplersVT009/C397B 2mL Clear Screw Vial, Blue Cap, Red PTFE/White Silicone, Bonded with Slit, Combi-KitVT009M/C397B 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded with Slit*, Combi-KitVT009MA/C397B 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded with Slit*, Combi-Kit

Ordering Information - Caps Pre-assembled on VialsPART NO. (100pk) DESCRIPTION853959B-1232 2mL Clear Vial with Marking Spot Assembled with 9mm Blue Cap Red PTFE/White Silicone853959BA-1232 2mL Amber Vial with Marking Spot Assembled with 9mm Blue Cap Red PTFE/White Silicone853979B-1232 2mL Clear Vial with Marking Spot Assembled with 9mm Blue Cap Red PTFE/White Silicone Slitted853979B-1232A 2mL Amber Vial with Marking Spot Assembled with 9mm Blue Cap Red PTFE/White Silicone Slitted

853979B-1232A 853959B-1232





Crimpers/Decappers and Storage Vials

Manual Crimpers and Decappers

Ordering Information - Manual Crimpers and DecappersPART NO. DESCRIPTIONCR00-08 8mm Hand Operated CrimperCR00-11 11mm Hand Operated CrimperCR00-20 20mm Hand Operated CrimperCR10-08 8mm Hand Operated DecapperCR10-11 11mm Hand Operated DecapperCR10-20 20mm Hand Operated DecapperCR20-08 8mm Crimp Type DecapperCR20-11 11mm Crimp Type DecapperCR20-20 20mm Crimp Type Decapper

Storage Vials

Storage Caps

Ordering Information - Storage Vials Pack

• Storage vials are available in 1, 2, 3 and 4 dram (4mL, 7mL, 12mL and 15mL).• Amber also available

Ordering Information - Closed Caps with PTFE/F217 Septa. White Virgin Septa (0.015”) or Unlined Caps Available.


VF013-1545 4mL Clear Screw Glass Vial, 15 x 45mm, 13-425 ThreadVF013A-1545 4mL Amber Screw Glass Vial, 15 x 45mm, 13-425 ThreadVF013MM-1545 4mL Clear Screw Glass Vial, w/ Marking Spot, 15 x 45mm, 13-425 ThreadVF013MA-1545 4mL Amber Screw Glass Vial, w/ Marking Spot, 15 x 45mm, 13-425 ThreadVS015-1760X 7mL Clear Screw Glass Vial, 17 x 60mm, 15-425 Thread

VX2015-1965X 10mL Clear Screw Glass Vial, 19 x 65mm, 15-425 ThreadV16018-2170X 15mL Clear Screw Glass Vial, 21 x 70mm, 18-425 Thread

C360-13W

VS015-1760X

PART NO. (100pk) DESCRIPTIONC360-13W 13mm White PP Closed Screw Cap, F217/PTFEC360-15W 15mm White PP Closed Screw Cap, F217/PTFEC360-18W 18mm White PP Closed Screw Cap, F217/PTFE



Headspace Vials

Headspace Vials• Our glass products are borosilicate type 1

glass• Strain point : 565°C• 6, 10 and 20mL headspace vials are available

with flat bottom or rounded bottom

To get reproducible results it is very important that the headspace vials and caps form a tight seal.In headspace analysis, the sample is sealed into the vial and heated until the concentration in the gas phase is in equilibrium with the concentration in the liquid phase. A sample from the headspace is then analyzed.Our headspace vials are according to manufacturersʼ guidelines.

Ordering Information - Headspace Vials & Caps (Agilent™, TechComp (Formerly Bruker/Varian), Tekmar Compatible)

PART NO. (100pk) DESCRIPTION Agilent™ Part

V06020-2338X 6mL Headspace Crimp Vial, 23 x 38m, 20mm 5182-0876VX0020-2346X 10mL Headspace Crimp Vial, 23 x 46mm, 20mm 5182-0838VXX020-2375X 20mL Headspace Crimp Vial, 23 x 75mm, 20mm 5182-0837Pre-assembled 20mm Headspace Cap and SeptaCHR-0030 20mm Aluminum Crimp Cap with Pharmafix Septa 5183-4479CHR-0031 20mm Aluminum Pressure Release Crimp Cap with Pharmafix Septa 5183-4480CLS-9508 20mm Aluminum Crimp Cap with Transparent Blue Septa -CLS-9980 20mm Safety Seal Crimp Cap, 3mm Tan Teflon/White Silicone Septa 5183-4478CLS-9981 20mm Silver Crimp Cap, 3mm Tan Teflon/White Slicone Septa 5183-4477

Ordering Information Screw Headspace Vials & Caps CTC/Leap Technologies

PART NO. (100pk) DESCRIPTIONVX0018-2346CTC 10mL Clear Headspace Glass Screw Vial, 23 x 46mm, 18-425VXX018-2375CTC 20mL Clear Headspace Glass Screw Vial, 23 x 75mm, 18-425Pre-assembled 18mm Magnetic Headspace Screw Cap and SeptaCHR-1309 18mm Silver Screw cap, Silicone Blue Transparent/PTFE WhiteCHR-1414 18mm Silver Screw cap, PTFE White/Silicone BlueCHR-1416 18mm Silver Screw cap, Butyl Red/PTFE Grey

V06020-2338X

VX0020-2346X

VXX020-2375XP

CLS-0030

CLS-9508

CLS-9980

VX0018-2346S

VXX018-2375S

For crimpers and

decappers see page 24

*For Tekmar (7000HT) and TechComp (formerly Bruker/Varian)

CLS-1309CLS-1414

CLS-1416



Headspace Vials

Ordering Information - Crimp Headspace Vials & Caps Perkin Elmer


VX0020PE-2346 10mL Headspace Crimp Vial, 23 x 46mm, 20mmVXX020PE-2375 20mL Headspace Crimp Vial, 23 x 75mm, 20mm

Pre-assembled 20mm Headspace Cap and SeptaCHR-0031 20mm Aluminum Pressure Release Crimp Cap with Pharmafix SeptaCLS-9980 20mm Aluminum Pressure Release Crimp Cap, 3mm Tan Teflon/White Sil. SeptaCLS-9981 20mm Silver Crimp Cap, 3mm Tan Teflon/White Slicone Septa

PART NO. (100pk) DESCRIPTIONVX0020B-2346X 10mL Clear Headspace Glass Crimp Vial, Rounded Bottom, 23 x 46mmVXX020B-2375X 20mL Clear Headspace Crimp Vial, Round Bottom, 23 x 75mm, 20mm

Pre-assembled 20mm Magnetic Headspace Crimp Cap and SeptaCLS-1535B 20mm Blue BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1536G 20mm Green BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1536GO 20mm Gold BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1535R 20mm Red BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/SilCLS-1536S 20mm Silver BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil

Ordering Information - Crimp Headspace Vials & Caps CTC/Leap Technologies

VXX020PE-2375

VX0020B-2346X

VXX020B-2375X

CLS-1535B CLS-1536GCLS-1536GO

CLS-1535R CLS-1536S



High Recovery Vials

The High Recovery Vial has a precision formed limited volume insert style conical well, with less than 2µL dead volume in the center of a solid glass bottom. This allows an autosampler to recover virtually the total sample and eliminates the need for limited volume inserts, supports and springs.

•Precision Limited volume injections with less than 2µL dead volume

•Large opening Eliminates bent needle problem associated with limited volume inserts

•Vortexing Ideal for vortexing limited volume samples•Volume 2mL and 4mL available•Concentrate samples in the same vial that you will use

in the autosampler

•Solid glass base offers better heat sink for concentrating samples

•Screw top, crimp top and snap cap vials available •Deactivated version available. Ideal for working with

protein, DNA and RNA

High Recovery Vial

Ordering Information - InSert Vial Glass wide mouth 12 x 32mm,with fused-in 300µL capacity insert

High Recovery Vials

PART NO. (100pk) DESCRIPTIONCHR05100CR 2mL High Recovery Crimp Top VialCHR05100SN 2mL High Recovery Snap Top VialCHR05100SC 2mL High Recovery Wide Mouth Screw Top Vial

Ordering Information - High Recovery Vial 12 x 32mm, wide mouth, 2mL

PART NO. (100pk) DESCRIPTIONVB311C-1232 2mL Clear Crimp Vial, Fused in 300µL insert, Fused BottomVB311-1232 2mL Clear Crimp/Snap Ring Vial, Fused in 300µL insert, Fused BottomVB309-1232 2mL Clear Wide Mouth Screw Vial, Fused in 300µL insert, Fused BottomVG311C-1232 2mL Clear Crimp Vial, Fused in 300µL insert, Fused Top, for GC applicationsVG311-1232 2mL Clear Crimp/Snap Ring Vial, Fused in 300µL insert, Fused Top, for GC applicationsVG309-1232 2mL Clear Wide Mouth Screw Vial, Fused in 300µL insert, Fused Top, for GC applications

For caps see page 4, 6 and 8.CHR05100CR

CHR05100SN

CHR05100SC

NEW



Microplates - Cap Mats

PART NO. DESCRIPTION QUANTITYPV-219004 EVA Sealing Mat to fit 96-square Well Plates 50PV-219019 EVA Sealing Mat to fit 96-square Well Plates, sterile 50PV-219036 EVA Sealing Mat for 96-round Well Plates 50PV-219038 EVA Sealing Mat for 96-round Well Plates, black 50PV-219042 EVA Sealing Mat for 96-round Well Plates, sterile 50

96-Well Assay Conical Bottom Plate

PART NO. DESCRIPTION QUANTITYIS07-9605 96 Well Cap Mat, Round, 100% Silicone, PTFE Coating eachIS07-9611 96 Well Cap Mat, Square, 100% Silicone, PTFE Coating eachIS07-9612 96 Well Cap Mat, Square, 100% Silicone, PTFE Coating with Slit eachIS07-9614 96 Well Cap Mat, Round, 100% Silicone, PTFE Coating with Slit eachIS07-9616 96 Well Cap Mat, Square, Wider plug, 100% Silicone, PTFE Coating eachIS07-9620 96 Well Clear, Ultra Thin Round Well, Soft Silicone, PTFE Coating with Slit each

96-Well Cap Mats

96-Well EVA Sealing Mats

IS07-9605 IS07-9611 IS07-9614 IS07-9616

IS07-9614




96-Well 2mL Filter PlateOrdering Information

PART NO. DESCRIPTION QTY Agilent™ HP Part

FV-9356045 96 Well Assay Conical Bottom Plate 420 ul 50 5042-1385

Direct replacement for Agilent® 96 Well Plate, 0.5mL

PART NO. DESCRIPTION QTY

FV-931919 96 Well 2mL Filter Plate 25 M Long drip 25



96-Well Storage and Collection Plates

96-Well, Deep, Square (47mm height)

• Made from virgin polypropylene• Tested for low extractables• Tight specification levels• V bottom to allow total liquid removal, partial collection and to aid re-suspension• No inner edges to allow better collection of magnetic beads• Manufactured under DNase/ RNase free environment• Working volumes of 350µL, 1mL and 2mL• Raised well rims to improve heat sealing• Conical base which aids sample concentration, reconstitution and centrifugation• Sterile and non-sterile versions available

The family of 96 square well plates was designed so that it would make the interchange of plates simpler in automated systems. All three plates have the same geometry and the only variable is the well depth.

96-Well, Shallow, Round(14.7mm height)

• Manufactured in polypropylene• Alphanumeric grid reference• High rigidity allows for centrifugation• Round and V-bottom allow greater liquid removal and particulate collection• Raised rims improve sealing and stop cross contamination

Porvair Sciences offers three plates with well capacities of 350µL, 300µL and 240µL. They have flat, round or V bottoms and can be used for compound storage, screening and cultur-ing.



96-Well Storage and Collection Plates

96-Well, Deep, Round(42mm height)

• Manufactured from pre-tested polypropylene for low extractables • Alphanumeric grid-referencing• DNase/ RNase free• Packed in sealed sleeves of 5 plates• Rimmed version to stop cross contamination and enable a better seal• Non rimmed version to allow insertion of vials, or where the seal is not crucial• Cylindrical well with round bottom for optimal mixing and recovery• Very easy to use with automated sample handling systems• Can be stored at -80ºC

The plates are manufactured in polypropylene to minimize extractables. Working volume is 1mL per well and total volume is 1.1mL. Coloured plates aid identification when retrieving from storage. Black plates are suitable for storing light sensitive compounds.

Ordering Information - 96-Well Plates

PART NO. DESCRIPTION QTY96-Well, Deep, SquarePV-219006 96 Deep Well, 350µL, PP, Square 50PV-219025 96 Deep Well, 350µL, Sterile PP, Square 50PV-219008-50 96 Deep Well, 1mL, PP, Square 50PV-219026 96 Deep Well, 1mL, Sterile PP, Square 50PV-219009-50 96 Deep Well, 2mL, PP, Square 50PV-219027 96 Deep Well, 2mL, Sterile PP, Square 5096-Well, Shallow RoundPV-208003 96 Shallow Well, 350µL, PP, Flat Bottom, Rimless 100PV-209003 96 Shallow Well, 300µL, PP, Round Bottom, Raised Rim 100PV-210003 96 Shallow Well, 150µL, PP, V Bottom, Raised Rim 10096-Well, Deep RoundPV-219002 96 Deep Well, 1mL, PP, Round Bottom, Raised Rim, Natural 50PV-219012 96 Deep Well, 1mL, Sterile PP, Round Bottom, Raised Rim, Natural 50PV-219037 96 Deep Well, 1mL, PP, Round Bottom, Rimless, Natural 50PV-219432 96 Deep Well, 1mL, PP, Round Bottom, Raised Rim, Blue 50PV-219422 96 Deep Well, 1mL, PP, Round Bottom, Raised Rim, Red 50PV-219412 96 Deep Well, 1mL, PP, Round Bottom, Raised Rim, Black 50


[email protected] :: www.chrom4.com 31

Riplate® 1mL• In polypropylene or polystyrene, Riplate® 1mL can

be used for high-throughput screening, combinatori-al chemistry, storage and preparation of essays etc.

• Riplate® 1mL is suitable for extreme temperature conditions like freezing or defrosting in the micro-wave.

• U-shaped well bottom reduces the death-volume.• Due to the high chemical resistance riplate® 1ml

is ideal for sensitive diagnostic applications. Riplate® 1mL is also in bioclean® (sterile) available.

Riplate® 1mL Plus• Raised wells reduce the risk of crosscontamination

and increase the security of hot sealing or sealing with adhesive foils. An improved footprint according to the SBS-standard and eight ventilation holes make Riplate® 1mL Plus the ideal format for use in a thermo-cycler or for defrosting of samples in a hot-water bath.

• Very high chemical resistance for chem cal agents and aggressive solutions

• High rigidity during centrifugation• New developed conical well permit a good bioturbation• Small rims around the wells avoid cross contamination

Riplate® 1mL is a registered trademark of Ritter, which has received a high confidence level by our customers, as Riplate® 1mL is the ideally compatible plate for many applica-tions, as well in its chemical or physical characteristics.

Riplate® 1mL-96-well-systems are in accordance with the SBS standard*and are suitable for all automation systems with the corresponding closing/sealing mechanism and for all 8- and 12-canal-pipettes. The classic formats Riplate® 1mL PP and PS are completed by the new format Riplate® 1mL Plus.

Riplate® 1mL medio are suited for screening, mixing and centrifugation of samples, as well as for the storage and preparation of substances. Through the compact construction Riplate® medio are stackable and through the low height you need approx. 50% storage capacity.*Society for Biomolecular Screening

Microplates

96-Well, Round, Low Profile • Allows stacking in higher densities • Minimizes space needed for compound

storage• Pure virgin polypropylene• Matching snug-fitting cap mat

A new introduction to the Porvair range is a low profile 1.1mL 96-well round plate with a height of just 27mm. This allows more plates to be stored or stacked in a

given space. The plates are made with extractable-free polypropylene for excellent results.

A specific anti-evaporation cap mat is also available for this plate manufac-tured from thermoplastic elastomer.

Riplate® - Deep Well Plate


PART NO. DESCRIPTION QTY96-Well, Round, Low ProfilePV-219250 96 Well, Low Profile, 1.1mL per well, 27mm high Storage Plate 50PV-219251 Thermoplastic Elastomer Cap Mat to fit PV-219250 100Riplate® Deep Well PlateRP96WUB-1ML 1mL PP Round Well Plate, Round Bottom 20RP96RWUB-1ML 1mL PP Round Raised Well Plate, Round Bottom 20RP96WUB-2ML 2mL PP Round Well Plate, Round Bottom 20

See page 28 for cap mats

Riplate® Deep Well Plate Now also available in 2mL round



Vial Selection Criteria

VT011L-1232 VT011LM-1232 VT11LM-1232A V1111-1232 CHR05100CR VT011-1232 VB311MC-1232

VT008-1232

VT008A-1232

VT008M-1232 VT008M-1232A V1108-1232 VT010-1232 VT010M-1232 VT010M-1232A

Crimp Neck 11mm

Snap Ring 11mm

Short Thread 9mm

Screw Neck 8mm, small opening Screw Neck 10mm, wide opening

smallopening

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

VT009-1232 VT009M-1232 VT009M-1232A VB309M-1232VB309M-1232A

VT309M-1232 V0309P-1232 CHR05100SC

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

VT011S-1232 VT011SM-1232 VT11SM-1232A VT311P-1232

V0300P-1232 VB311M-1232

VT311MC-1232

mm6.11 x 23

mm6.11

x 23

mm6.11

x 23

mm6.11 x 23

mm6.11 x 23

mm6.11 x 23

V0159P-1232

NEW for Ion

Chromatography

*

*

** Please inquire




V0308-632 V0606-632 V0808-830 V0808-840 V0808A-840 V0708-840 V0708-840 V0708-840A V0608-840A

I025BS-629

Micro-Inserts for wide opening Micro-Inserts for small opening

Screw Neck 13mm

Crimp Neck 8mm

mm6 x 13

mm6 x 13

mm7.5 x 92

mm5 x 13

mm5 x 13

mm4 x 5.72

mm6 x 13

mm5.5 x 5.13

mm5.5 x 5.13

mm2.8 x 03

mm2.8 x 04

mm2.8 x 04

mm7 x 04

mm7 x 04

mm7 x 04

mm7.41 x 54

mm7.41 x 54

mm6 x 04

mm7 x 03

mm5 x 13

V800-840Q V800-840AQ

Waters Shell Vials, 1ml (Insert)

mm2.8 x 04

mm2.8 x 04

I025-630 I025-530

VF013-1545 VF013-1545A

VX0020B-2346XVX0020BA-2346X

VX0020-2346X VXX020-2375X VXX020B-2375XVXX020BA-2375X

VXX020SPME-2375 VX0020BS-2346X VXX020BS-2375X

Headspace 20mm Crimp

mm5.22 x 64

mm5.22 x 64

mm5.22 x 5.57

mm5.22 x 5.57

mm5.22 x 5.57

V0808A-830

mm2.8 x 03

mm5 x 92

mm5 x 43

I025CP-631 I025TP-631 I01-531 I025-629 I015TP-428

mm6 x 54.34

I025BS-529

CHR0146 I045-4306 CHR0651

I025GF-631

mm6 x 13

mm32 x 5.5746

x 2

2.5m

m

CHR0865 CHR0866 CHR0357 CHR0669 CHR0269 CHR0279 CHR0968CHR0129 CHR1240

C

V0708-740 V0708-740A

[email protected] :: www.chrom4.com34



Mentioned trademarks are registered trademarks of their respective owners. No license or immunity under any patent is granted or implied by our sale of any material. CHROM4 is not affiliated with any of the companies listed below, or their products. Products listed under the companies below are compatible with their instrumentation. Agilent™, Beckman, Bruker, CTC/Leap, Perkin Elmer, Shimadzu, Waters

Sample Preparation


Sample Preparation

FiltrationFilter Membrane Compatibility Chart

Filter Membrane Chemical Compatibility Chart

Chemical

noly

N

EF

TP

FD

VP

esol

ulleC

detarene

geR

AcidsAcetic, 25% L C C CAcetic, Glacial L C C CFormic, 25% N C C CHydrochloric, 25% L C C CHydrochloric, Concentrated N N C CSulfuric, 25% N C C CSulfuric, Concentrated N C L LNitric, 25% N C L CNitric, Concentrated N C L NPhosphoric, 25% N C C CTrichloroacetic, 10% L C C C

BasesAmmonium Hydroxide, 25% C C L —Sodium Hydroxide, 3 Normal C C C —

AlcoholsAmyl Alcohol C C C CBenzyl Alcohol C C C CButyl Alcohol C C C CEthanol, 70% C C C CEthanol, 98% C C C CEthylene Glycol C C C CGlycerine (Glycerol) C C C CIsopropanol C C C CMethanol, 98% C C C Cn-Propanol C C C CPropylene Glycol C C C C

HydrocarbonsBenzene C C C CHexane, Xylene C C C CKerosene, Gasoline C C C CTetralin, Decalin C C C —Toluene C C C C

Halogenated HydrocarbonsCarbon Tetrachloride C C C CChlorobenzene (Mono) C C C CChloroform L C C CFreon C C C CMethylene Chloride L C C CTrichloroethane C C C CTrichloroethylene C C C C

Filter Membrane Chemical Compatibility Chart

Chemical

noly

N

EF

TP

FD

VP

esol

ulleC

detarene

geR

KetonesAcetone C C N CCyclohexanone C C N CIsopropylacetone C C N —Methyl Ethyl Ketone C C L CMethyl Isobutyl Ketone (MIBK) C C N C

Esters2-Ethoxyethyl Acetate L L L CAmyl Acetate C C C CBenzyl Benzoate C C — CButyl Acetate C C C CEthyl Acetate C C C CIsopropyl Myristate C C — CMethyl Acetate L C L CPropyl Acetate L N C CPropylene Glycol Acetate L C — CMethyl Cellosolve Acetate C C C CTricresyl Phosphate — C — C

Oxides — EthersAcetonitrile (Methyl Cyanide) C C C CAniline L C C CDiethyl Acetamide C C C CDimethyl Formamide C C N LDimethyl Sulfoxide (DMSO) L C C LDioxane C C L LEthyl Ether C C C CIsopropyl Ether C C N —Pyridine C C L C

Solvents with NitrogenTetrahydrofuran C C L LTriethanolamine C C C C

MiscellaneousFormaldehyde Solution, 30% C C C LHydrogen Peroxide, 30% N C C CPhenol, Aqueous, 10% N C L CSilicone Oil and Mineral Oil C C C C

LEGEND - C=Compatible, L=Limited Compatibility, N=Not Compatible, =No Data Available, PTFE=Teflon®, PVDF=Polyvinyledene Difloride

Sample Preparation


Syringe and Membrane Filters

Sample Preparation


Syringe and Membrane Filters

InnoSep™CHROM4 Offers Affordable, Quality Syringe Filters

Housing Polypropylene housings are highly solvent resistant and exhibit low extractables. They are ideal for filtering samples or solvents used in chromatography.

Size4mm syringe filters are useful for filtration up to 1mL of low particulate level chromatography of biological samples.17mm syringe filters have a filtration area of 1.3cm2 and a hold-up volume of less than 30uL with an air purge.Ideal for samples up to 12mL.30mm syringe filters have a filtration area of 4.9cm2 and offer the fastest sample filtration.

MembraneThe cellulose acetate and polysulfone membranes are all low protein binding, which makes them well suited for filtration of biological samples.PTFE membrane in a PP housing can be used to filter sol-vents and strong acids.Although PTFE is inherently hydrophobic, it can be made hydrophilic by pre-wetting the membrane with methanol and then rinsing with water.Nylon or polypropylene are ideal for filtration of chromatogra-phy samples.Polypropylene membranes exhibit near zero extractables, arevery resistant to solvents and most chemicals and would be the first choice for filtration of chromatography samples.

Next to our excellent InnoSep™ line, we also carry a complete transfer membrane line.

See page 35 for Filter Membrane Compatibility Chart

Material Description Features Application Pore SizeCA Internally supported

cellulose acetate• Lowest binding material available• Highest throughput• Strength and dimension stability• Uniform pore structure• Hydrophilic

• Tissue culture media sterilization• Protein & enzyme filtration sterilization• Biological fluid filtration, sterilization• Tissue culture media sterilization

0.22 - 5.0

Glass Fiber Glass fiber prefilters • Biologically inert• Available with or without acrylic binders• High dirt-holding capacity

• Gravimetric analysis• Prefilter to extend final filter life• Clarification of particulate laden solutions

0.5, 0.7, 1.0

NC Unsupported nitrocellulose mixed cellulose esters

• Consistent flow rates• High throughputs• Uniform pore structure• Hydrophilic

• Aqueous filtration• Microbiological analysis• Sterility testing• Gravimetric analysis with ashing technique• Particulate analysis

0.1 - 8.0

Nylon Internally supported nylon • Naturally hydrophilic• Wide chemical compatibility range• Extremely low extractables• Strength and dimensional stability

• Sterilization, clarification of aqueous and organic solvent solutions• LC sample preparation

0.1 - 20.0

PP Polypropylene • Chemically and biologically inert• Wide chemical compatibility range• Extremely low extractables

• Sterilization, clarification of organic solvent solutions• LC sample preparation

0.1, 0.22, 0.45

PES Polyethersulfone • Low protein binding• Low extractables• Autoclavable• Wide chemical compatibility range• Strength and dimensional stability

• Tissue culture media sterilization• Protein and enzyme filtration, sterilization• Biological fluid filtration, sterilization • Ion chromatography

0.22 - 5.0

PVDF Polyvinylidene difluoride • Hydrophobic• Chemically inert towards many solvents, similar stability to PTFE

• Filtration of polar and non-polar solutions 0.2 - 0.45

PTFE Polytetrafluoroethylene(Teflon laminated onto a polypropylenesupport)

• Naturally hydrophilic• Compatible with strong acids and aggressive solvents• Improved durability and handling

• Filtration of strong acids and aggressive solvents• Venting applications

0.22, 0.45, 1.0

Sample Preparation


Chrom4 Syringe Filters are available in a select number of filter media, diameters and pore sizes.Please contact us for ordering information on items not shown.

Membrane Materials: Cellulose Acetate, Nylon, PES, PTFE, PVDFMembrane Diameter: 25 mmEffective Filtration Area: 4.6 cm²Housing Diameter: 33 mmHousing Materials: PolypropyleneInlet / Outlet: FLL / MLL-MLSHoldup Volume: <100 microliterSample Volume: <120 mLMaximum Operating Temperature: PP - 90°C/194°FMaximum Operating Pressure: 80 psiSterile: NoAnti-burst ring: No

InnoSep™ SF25 N

SF6054-06N SF6058-06N

SF5510-06N SF5509-06N SF5508-06N

SF6055-06N SF6057-06N

SF5511-06N

Part Number Qty Description

SF5511-06N 100 25 mm PVDF 0.45 µm

SF5510-06N 100 25 mm PVDF 0.2 µm

SF6058-06N 100 25 mm PTFE 0.45 µm

SF6057-06N 100 25 mm PTFE 0.2 µm

SF6054-06N 100 25 mm Nylon 0.45 µm

SF6055-06N 100 25 mm Nylon 0.2 µm

SF5509-06N 100 25 mm PES 0.45 µm

SF5508-06N 100 25 mm PES 0.2 µm

SF5003-06N 100 25 mm CA 0.2 µm

SF5112-06N 100 25 mm CA 0.45µm

Sample Preparation


Chrom4 Syringe Filters are available in a select number of filter media, diameters and pore sizes.Please contact us for ordering information on items not shown.

InnoSep™ SF13Membrane Materials: Nylon, PTFE, PVDFMembrane Diameter: 13 mmEffective Filtration Area: 0.65 cm²Housing Diameter: 13 mmHousing Materials: PolypropyleneInlet / Outlet: FLL-MLSSample Volume: < 10 mLMaximum Operating Pressure: 85 psiSterile: NoAnti-burst ring: Yes

Part Number Qty Description

CNY6502 100 13mm Nylon 0.2 µm

CNY6503 100 13mm Nylon 0.45 µm

CPT6500 100 13mm PTFE 0.2 µm

CPT6505 100 13mm PTFE 0.45 µm

CPV6501 100 13mm PVDF 0.2 µm

CPV6504 100 13mm PVDF 0.45 µm

CNY6502 CPT6500 CPV6501 CPV6504CNY6503 CPT6505

Sample Preparation


Nylon• Naturally hydrophilic• Wide chemical compatibility range, organic solvent resistance (except acidsandbases)• Internally supported• Strength and dimensional stability• High binding capacity, high dirt loading capacity• Available in gridded and 1+ PK for testing

Polytetrafluoroethylene (PTFE)• Naturally hydrophilic• Compatible with strong acids and aggressive solvents• Improved durability and handling

Polyvinylidene Difluoride (PVDF)• Hydrophobic• Suitable for filtration of polar and non-polar solutions• Chemically inert towards many solvents, similar stability to PTFE

Membrane Filters

Chrom4 Membrane Filters

Pre Cut Size (mm) 25 47 90

Qty Per package 100 100 25

Nylon 0.2µm SFNY202500 SFNY204700 SFNY2090250.45µm SFNY502500 SFNY504700 SFNY509025

PTFE0.2µm SFPT202500 SFPT204700 SFPT2090250.45µm SFPT502500 SFPT504700 SFPT509025

PVDF0.2µm SFPV202500 SFPV204700 SFPV2090250.45µm SFPV502500 SFPV504700 SFPV509025


Sample Preparation


Separa Syringeless Filter VialsSave time with your sample prep process with SEPARA® filters and vials disposable device. Easy to press, fast and simple to use.

Available with 5 different membranes, 0.45 µm & 0.22 µm:

Ordering Information:

Features & BenefitsRapid single step sample preparationReduce sample loss. Ready to go for HPLC or UHPLC auto-samplerCompatible with most standard auto-samplers The pre-slit cap ensures easy and clean transfer of sample.

SpecificationsDimensions: 12mm I.D x 33mm heightMaterial: Polypropylene vial, Cap Septa, PTFE/siliconeFill line volume: 0.48mLFiltering capacity: 0.45mLDead volume: 30uL The force needed to compress the unit is estimated at8psi(0.6bar)Maximumoperatingtemperature:120°F(50°C)

PTFE RC PES PVDF NY

• Filtration of strong acids and aggressive solutions

• Drug Metabolite Studies (Protein PPT)

• Clarification of aqueous and organic solvent solutions• HPLC sample preparation

• Chromatography

• Filtration of Aqueous and Organic Solutions

• Analytical Sample Prep, uHPLC

• Chromatography• Clarification

• Protein Chemistry

• Biological Studies• ICP Sample Preparation

• Dissolution Testing

• Biological Studies• Clarification Studies

(wine industry)• Dissolution Testing

• Clarification of aqueous and organic solvent

solutions• HPLC sample preparation

• Chromatography

Item No. Description Membrane Pore Size (µm) UOM

FVNY020 Filter Vials, Snap Caps, Light Blue, pre-slit PTFE/Silicone Septa Nylon (NY) Hydrophilic 0.2 \100

FVNY045 Filter Vials, Snap Caps, Dark Blue, pre-slit PTFE/Silicone Septa Nylon (NY) Hydrophilic 0.45 \100

FVPES020 Filter Vials, Snap Caps, Light Green, pre-slit PTFE/Silicone Septa Polyethersulfone (PES) Hydrophilic 0.2 \100

FVPES045 Filter Vials, Snap Caps, Dark Green, pre-slit PTFE/Silicone Septa Polyethersulfone (PES) Hydrophilic 0.45 \100

FVPVDF020 Filter Vials, Snap Caps, Yellow, pre-slit PTFE/Silicone Septa Polyvinylidene Difluoride (PVDF) Hydrophilic 0.2 \100

FVPVDF045 Filter Vials, Snap Caps, Orange, pre-slit PTFE/Silicone Septa Polyvinylidene Difluoride (PVDF) Hydrophilic 0.45 \100

FVPTFE020 Filter Vials, Snap Caps, Pink, pre-slit PTFE/Silicone Septa Polytetrafluoroethylene (PTFE) Hydrophobic 0.2 \100

FVPTFE045 Filter Vials, Snap Caps, Red, pre-slit PTFE/Silicone Septa Polytetrafluoroethylene (PTFE) Hydrophobic 0.45 \100

FVRC020 Filter Vials, Snap Caps, Gray, pre-slit PTFE/Silicone Septa Regenerated Cellulose (RC) Hydrophilic 0.2 \100

FVRC045 Filter Vials, Snap Caps, Black, pre-slit PTFE/Silicone Septa Regenerated Cellulose (RC) Hydrophilic 0.45 \100

Sample Preparation


Advantages of Polymeric Solid Phase Extraction

IRIS™ Polymeric SPE SorbentsIRIS™ sorbents are available in six different phase chemistries offering maximum

flexibility for method development.

IRIS PLUS 100% Divinylbenzene RP phase

Pore size: 80 ÅSurface area: ~700 m2/g

IRIS WCX Organic acid on DVB phase

Pore size: 80 ÅIon-Exchange capacity: ~1 meq/g

pKa ~5

IRIS NPolyamide phase - HLB* type sorbent

Pore size: 80 ÅSurface area: ~500 m2/g

IRIS WAXSecondary amine on DVB phase

Pore size: 80 ÅIon-Exchange capacity: ~1 meq/g

pKa ~7

IRIS MAXQuaternary amine phase

on DVB phasePore size: 80 Å

Ion-Exchange capacity: ~0.1 meg/gpKa >18

IRIS MCX Sulfonated hydrophilic

on DVB phasePore size: 80 Å

Ion-Exchange capacity: ~1 meq/gpKa <1

• Available in 25-35 µm

• Available in various cartridge sizes

and 96-well plate formats

* Localized hydrophilic/lipophilic base

1. Excellent recovery - highly retentive nature of polymeric phases2. High surface area that results in higher analyte capacity compared to silica based SPE3. Reduced resin volumes for improved detection limits and reduced drying time4. Inert to a wide array of solvents and pH ranges5. Absence of leachables6. Absence of residual silanol groups7. Resistant to dewetting

Low pKa Phase

High pKa Phase

Sample Preparation


IRIS™ Polymeric SPE SorbentsSorbent Analyte Properties Matrix/Sample Retention Elution

MIXED-MODE CATION-EXCHANGE

IRIS MCX IRIS WCX

Charged/Ionized compounds

• Cation-exchange

(basic) analytes

• Non-polar to moderately

polar hydrophobic

• Neutral

Aqueous – diluted

with buffer

Example:

Biological fluids

with buffer

Higher % of aqueous

solvent (water)

Lower % of organic solvent

Lower ionic strength

pH < pKa of analyte

pH > pKa of sorbent

Lower % of aqueous

solvent (water)

Higher % of organic solvent

Higher ionic strength

pH > pKa of analyte

pH < pKa of sorbent

MIXED-MODE ANION-EXCHANGE

IRIS MAXIRIS WAX

Charged/Ionized compounds

• Anion-exchange

(acidic) analytes


polar hydrophobic

• Neutral

Aqueous – diluted

with buffer

Example:

Biological fluids

with buffer

Higher % of aqueous

solvent (water)


Lower ionic strength

pH > pKa of analyte

pH < pKa of sorbent

Lower % of aqueous

solvent (water)


Higher ionic strength

pH < pKa of analyte

pH > pKa of sorbent

REVERSED-PHASE

IRIS PLUS IRIS N


polar hydrophobic

• Neutral

Example:

Pharmaceuticals,

pesticides, herbicides,

Alkaloids

Aqueous – diluted with buffer

Example:

Biological fluids, water

Higher % of aqueous

solvent (water)


pH adjusted buffer to place

analyte in neutral form

(if applicable)

Lower % of aqueous

solvent (water)



analyte in charged form

(if applicable)

NORMAL-PHASE

IRIS N

• Moderate to highly polar

• Neutral

Example:

Pesticides

Non-polar to moderately

polar organic

Example:

Biological fluids, oil, fats


Lower % of aqueous solvent

(water)



(if applicable)


Higher % of water



(if applicable)

IRIS™ General Method Guidelines

This table provides general method guidelines. Each IRIS polymeric SPE box contains detailed instructions for each specific phase.

Sample Preparation


IRIS MCXpage #50

NOAnalyte Properties

NO

YES

YES

STRONG

IRIS WCXpage #52

IRIS PLUSpage #46

IRIS Npage #48

IRIS WAXpage #56

IRIS MAXpage #54

Strong Base?

Retention of

Neutrals?

Strong Acid?

*Acid, Neutral,

or *Base?

* If analytes contain both acids and bases, select the dominant interaction.

IRIS™ Sorbent Selection Guidelines

IRIS Sorbent Mass

Minimum Recommended Elution Volume

Typical Elution Volume

500 mg 5 mL 10 mL to 25 mL

200 mg 2 mL 3 mL to 10 mL

60 mg 600 µL 1.2 mL to 3 mL

30 mg 300 µL 0.6 mL to 2 mL

10 mg 100 µL 0.3 mL to 1 mL

* Elution volumes depend on the chemical nature of the analyte, its relative concentration in the matrix, the chemistry of the solution solvent and the sorbent bed mass. Please be advised that the tables above provide general guidelines. Please contact our technical support team for specific method development support or guidelines for specific applications.

Sample Type and Sorbent Mass Guidelines

Industry Typical ExampleTypical SampleVolume

Recommended Sorbent

MassRecommended

Reservoir

Environmental Drinking water,

Surface water,

Waste water, Soil

0.1 L to 1 L 200 mg 6 mL

Food & Agriculture Food homogenate

from Fish, Fruit, Meat,

Poultry, Wheat

1 mL to 3 mL 60 mg 3 mL

Clinical & Bioanalysis Blood, Plasma, Urinediluted

0.4 mL to 3 mL 30 mg 1 mL

BALANCED

Sample Preparation


IRIS SPE Sample Extraction Products

• InnoSep Vacuum manifolds for SPE sample preparation, filtration,

and elution are available in 12, 16, and 24 port configurations.

• These manifolds permit consistent extraction and filtration

results. Multiple sample processing with these manifolds

simplifies procedures and saves time. The manifolds consist of a

clear glass chamber and lid to which a vacuum is applied to draw

a sample through an SPE column, cartridge, or disk.

• Adjustable racks placed in the glass vacuum chamber will

accommodate

a variety of sample collection vessels, including test tubes,

autosampler vials, volumetric flasks, and Erlenmeyer flasks.

Eluents are deposited directly into the collection vessel of choice

via polypropylene, optional stainless steel, or Teflon needles.

• Virgin polypropylene solid phase extraction cartridges with frits

• Available in format ranging from 1 mL to 6 mL

• High throughput SBS format plates compatible with

most automated systems

• Available with 10 mg, 30 mg and 60 mg bed mass

• Design for online solid phase extraction using a switching valve

• Wide choice of column configuration

• Online guard columns are available in 10x2.1 mm & 10x4.6 mm packed

with 5 µm of any of the six phase chemistries

(please inquire)

online columns & guard cartridges

innosep vacuum manifolds

cartridges (syringe barrel & frits)

96-well plates (deep well plate format)

Sample Preparation


The IRIS PLUS is a 100% DVB phase. This unique polymer phase is our most retentive reversed-phase sorbent.

It is a great replacement for your current C18 or PS-DVB SPE sorbents.

• 100% Divinylbenzene (DVB) phase

• Pore Size: 80 Å

• Surface area: ~700 m2/g

• Available in 25-35 µm particle size

• Available in various cartridge sizes and 96-well plate formats

PLUS

iris plus

Part No. Description Particle Size Qty (Box)

IR34460 IRIS PLUS 10mg/1mL 25-35µm 100







IRIS PLUS SPE Cartridges


IR96341 IRIS PLUS 96-well 10mg/1mL 25-35µm 1





IRIS PLUS SPE 96-well Plates

Sample Preparation


Polycyclic aromatic hydrocarbons - PAH

Features & Benefits

IRIS PLUS APPLICATION

• Higher Recoveries – due to the highly retentive nature of the DVB packing material

• Lower Background Signals – proprietary cleaning process for ultrapure resins decreasing background signals

• Durability – stability at pH extremes of 0-14

• Improved Detection Limits and Reduced Drying Time – using reduced resin volumes

• Eliminate Matrix Effects – cleaner sample extracts reduce or eliminate matrix ion suppression

• IRIS PLUS – most hydrophobic reversed-phase available

• Excellent for environmental samples

iris plus

Sorbent: IRIS PLUS - 200 mg/6mLPart Number: IR34445Solution Conc: 10 µg/mL in H2O

Recovery Rates:

ChryseneBenzo(a) Anthracene

104.8%

Benzo(b)FluorantheneBenzo(j)FluorantheneBenzo(k)Fluoranthene

106.5%

Benzo(a)pyreneBenzo(e)pyrene

106.5%

Indeno(1,2,3-cd)pyreneBenzo(g,h,i)peryleneDibenz(a,h)anthracene

98.7%

Figure 1: GCMS Chromatogram

Group 1

Group 2

Group 3

Group 4

Sample Preparation


This novel polyamide polymer phase provides a highly hydrophilic/lipophilic balance making it the SPE material

with the widest applicability. The outstanding reversed-phase characteristics of this material are only one part of this

material’s success. This phase chemistry offers multiple interaction mechanisms and can be used for both reversed-

phase and normal-phase applications.

• Polyamide phase - HLB type sorbent

• Pore size: 80 Å

• Surface area: ~500 m2/g



Niris n


IR44460 IRIS N 10mg/1mL 25-35µm 100

IR44461 IRIS N 30mg/1mL 25-35µm 100

IR44462 IRIS N 30mg/3mL 25-35µm 100

IR44446 IRIS N 60mg/3mL 25-35µm 100

IR44264 IRIS N 100mg/3mL 25-35µm 100

IR44445 IRIS N 200mg/6mL 25-35µm 30

IR44266 IRIS N 500mg/6mL 25-35µm 30

IRIS N SPE Cartridges


IR96441 IRIS N 96-well 10mg/1mL 25-35µm 1





IRIS N SPE 96-well Plates

R1

R2

R3N

O

Sample Preparation


IRIS N APPLICATION

Features & Benefits

• Localized Hydrophilic/Lipophilic Base (HLB type sorbent) – using a combination of polar and non-polar interactions to provide optimal analyte/resin contact

• Polyamide Stationary Phase – excellent water wettability using reversed-phase mode up to 100% aqueous solvent or normal-phase mode using up to 100% organic solvents

iris n

Estriol, Hydrocortisone, Betamethasone

Sorbent: IRIS N - 30mg/1mLPart Number: IR44461 Solution Conc: 6 µg/mL in H2O

Recovery Rates: Estriol Hydrocortisone Betamethasone Run 1 109.5% Run 1 104.4% Run 1 100.3% Run 2 104.1% Run 2 102.6% Run 2 100.8% Run 3 109.3% Run 3 103.8% Run 3 100.0%

Hydrocortisone

Estriol

Betamethasone

1917151375

Time (min)

mA

U

0

2

4

10

8

6

12

3 9 11

Estriol Hydrocortisone

14

Beamethasone

H

HHO

FO

OH

OHO

Sample Preparation


IRIS MCX is a water-wettable sulfonated divinylbenzene mixed-mode phase for both cation-exchange and

reversed-phase applications. IRIS MCX allows for easy method development, through its dual retention qualities,

for a wide range of basic and neutral compounds. IRIS MCX shows excellent retention for essentially all of the

common basic drugs of abuse and similar amine containing compounds. The phase is stable over the complete

pH range (0-14) and can be used with nearly any solvent, allowing the use of a wide range of solvents.

• Sulfonated DVB phase


• Ion-Exchange capacity: ~1 meq/g

• pKa <1



iris mcxMCX


IR54460 IRIS MCX 10mg/1mL 25-35µm 100




IR54264 IRIS MCX, 100mg/3mL 25-35µm 100



IRIS MCX SPE Cartridges


IR96541 IRIS MCX 96-well 10mg/1mL 25-35µm 1





IRIS MCX SPE 96-well Plates

Sample Preparation


IRIS MCX APPLICATION

Features & Benefits

• Sulfonated DVB Phase – allows for cation-exchange and reversed-phase separations• 100% DVB – no swelling, increased retention, excellent flow properties and pH stability• Excellent Wettability – even after drying, due to hydrophilic/hydrophobic balance

iris mcx

Norephedrine & Ephedrine HydrochlorideSorbent: IRIS MCX - 30 mg/1mL

Part Number: IR54461Solution Conc: 50 µg/mL in H2O 0.1% Formic Acid Recovery Rates: Norephedrine Ephedrine Hydrochloride Hydrochloride Run 1 94.2% Run 1 94.7% Run 2 91.8% Run 2 92.7% Run 3 93.4% Run 3 96.4%

Note 1: After wash step cartridge was dried for 1 minute using vac. The collected elute solution was placed in a 2 ml volumetric and brought to the mark with H2O (0.1% formic acid).

Time (min)

mA

U

-2

3

18

4 6 10

Norephedrine Hydrochloride

Ephedrine Hydrochloride

Ephedrine Hydrochloride

23

13

8

8 12 14

Norephedrine Hydrochloride

Sample Preparation


IRIS WCX is a weak cation-exchange divinylbenzene polymer phase. IRIS WCX eliminates the guesswork

commonly found in lengthy method development associated with strong bases such as quaternary amines.

This phase utilizes the chemical functionality of a carboxylic acid. When the phase is negatively charged, it

retains strong bases such as quaternary amines and releases them when neutral. IRIS WCX has repeatedly

proven consistency and reliability, reducing the need for time consuming and costly retesting.

• Organic acid on DVB phase



• pKa ~5



WCX

iris wcx


IR84012 IRIS WCX 10mg/1mL 25-35µm 100






IR84021 IRIS WCX 1gram/6mL 25-35µm 10

IRIS WCX SPE Cartridges


IR97008 IRIS WCX 96-well 10mg/1mL 25-35µm 1





IRIS WCX SPE 96-well Plates

Sample Preparation


IRIS WCX APPLICATION

Features & Benefits

• Organic Acid Phase – allows for tunable selectivity for strong bases• 100% DVB – no swelling, increased retention, excellent flow properties and pH stability• Retain and Release – easy separation of strong bases• Uniquely Selective – fast and efficient sample preparation and purification for strong bases

iris wcx

SulfonamidesSorbent: IRIS WCX - 30 mg/1mLPart Number: IR84013Solution Conc: 5 µg/mL in H2O

Recovery Rates: Sulfadiazine Sulfathiazole Sulfamerazine Sulfamethazine Run 1 98.8% Run 1 95.0% Run 1 99.9% Run 1 99.5% Run 2 102.2% Run 2 98.1% Run 2 100.5% Run 2 99.4% Run 3 98.2% Run 3 93.8% Run 3 95.6% Run 3 96.5%

151375

Time (min)

mA

U

2

4

10

8

6

12

3 9 11

Sulfadiazine

Sulfathiazole

Sulfamerazine

Sulfamethazine

Sulfadiazine

Sulfathiazole

Sulfamerazine

Sulfamethazine

0

16

14

18

20

H2N

O

OS

HN N

N

Sample Preparation


iris max MAX

• Quaternary amine on DVB phase


• Ion-Exchange capacity: ~0.1 meq/g

• pKa >18



IRIS MAX is a water-wettable quaternary amine divinylbenzene polymer phase designed for both anion-exchange

and reversed-phase extraction. As a result of its bifunctionality, IRIS MAX produces outstanding retention for charged

and neutral compounds. It is excellent for compounds containing an organic acid or similar ionizable functional

groups. The phase is stable over the complete pH range (0-14) and can be used with nearly any solvent permitting

the use of a wide range of solvents.


IR64460 IRIS MAX 10mg/1mL 25-35µm 100




IR64264 IRIS MAX, 100mg/3mL 25-35µm 100



IRIS MAX SPE Cartridges


IR96641 IRIS MAX 96-well 10mg/1mL 25-35µm 1





IRIS MAX SPE 96-well Plates

Sample Preparation


IRIS MAX APPLICATION

Features & Benefits

• Quaternary Amine Phase – allows for anion-exchange and reversed-phase separations• 100% DVB – no swelling, increased retention, excellent flow properties and pH stability• Excellent Wettability – even after drying, due to hydrophilic/hydrophobic balance

iris max

DL-TyrosineSorbent: IRIS MAX - 30 mg/1mL Part Number: IR64461 Solution Conc: 40 µg/mL in H 2 O

Recovery Rates: Run 1 92.9%

Run 2 90.8% Run 3 93.1%

DL-Tyrosine

6 842

Time (min)

mA

U

0

0 10 12 14

2

6

8

4

10

12

NH2O

O

OH

Sample Preparation


IRIS WAX is a mixed-mode weak anion-exchange divinylbenzene polymer phase, designed to retain and release

strong acids such as sulfates. Depending on the requirements of the application, this phase can be used in the

neutral or positively charged state. IRIS WAX displays both anion-exchange and reversed-phase behavior, which

promotes excellent retention over a wide range of hydrophilicity for both acidic, when phase is positively charged,

and neutral compounds.

• Secondary amine on DVB phase



• pKa ~7



WAX

iris wax


IR86011 IRIS WAX 10mg/1mL 25-35µm 100






IRIS WAX SPE Cartridges


IR97508 IRIS WAX 96-well 10mg/1mL 25-35µm 1





IRIS WAX SPE 96-well Plates

Sample Preparation


IRIS WAX APPLICATION

Features & Benefits

• Secondary Amine Phase – allows for tunable selectivity for strong acids • 100% DVB – no swelling, increased retention, excellent flow properties and pH stability• Excellent Retention – bifunctional with reversed-phase and anion-exchange behavior• Uniquely Selective – fast and efficient sample preparation and purification for strong acids

iris wax

Nitro-L-Tyrosine, Iodo-L-Tyrosine, N-Acetyl-L-TyrosineSorbent: IRIS WAX - 30 mg/1mL

Part Number: IR86012Solution Conc: 10 µg/mL in H2O

Recovery Rates: Nitro-L-Tryosine Iodo-L-Tyrosine N-Acetyl-L-Tyrosine Run 1 96.7% Run 1 94.8% Run 1 99.1% Run 2 98.0% Run 2 98.8% Run 2 102.6% Run 3 98.2% Run 3 95.0% Run 3 103.6%

20155

Time (min)

mA

U

10

Nitro-L-Tyrosine

Iodo-L-Tyrosine

N-Acetyl-L-Tyrosine

Nitro-L-Tyrosine Iodo-L-Tyrosine

N-Acetyl-L-Tyrosine4

-1

9

19

14

24

25 30

HNHO

O

O

OH

NH2HO

O2NO

OH

HO

IO

OHNH2H

Sample Preparation


Applications - EnvironmentalPolycyclic aromatic hydrocarbons - PAH

Sorbent: IRIS PLUS - 200 mg/6mLPart Number: IR34445Solution Conc: 10 µg/mL in H2O

Recovery Rates:

Sorbent: IRIS N - 30 mg/1mLPart Number: IR44461Solution Conc: 1, 1, 5, 10 µg/mL in H2O

Recovery Rates: Carbaryl Atrazine Methiocarb Alachlor Run 1 102.0% Run 1 98.0% Run 1 101.4% Run 1 98.0% Run 2 100.1% Run 2 101.1% Run 2 101.0% Run 2 101.1% Run 3 99.9% Run 3 102.2% Run 3 99.6% Run 3 102.2%

ChryseneBenzo(a) Anthracene

104.8%

Benzo(b)FluorantheneBenzo(j)FluorantheneBenzo(k)Fluoranthene

106.5%

Benzo(a)pyreneBenzo(e)pyrene

106.5%

Indeno(1,2,3-cd)pyreneBenzo(g,h,i)peryleneDibenz(a,h)anthracene

98.7%


Group 1

Group 2

Group 3

Group 4


Carbaryl, Atrazine, Methiocarb, Alachlor

Carbaryl

Atrazine

Methiocarb

Alachlor

8585

UA

m

-1

4

9

29

39

4 9 11

Carbaryl

Atrazine

Methiocarb

Alachlor

3 6 10 12

14

19

24

34NHO

O

CI CH2 CH3N

N

N

H CH CH3

CH3

N

N

H

CI CH3

CH3H3C

O

ON

HN O

O OS

Sample Preparation


Applications - EnvironmentalSorbent: IRIS WCX - 30 mg/1mLPart Number: IR84013Solution Conc: 10 µg/mL in H2O

Recovery Rates: Run 1 92.4% Run 2 92.7% Run 3 85.8%

Note: The peak area values for Diquat were found to change over time. There was a relatively quick change to lower area values that then

somewhat leveled off. The area values used for quantitation were for injections of the standards and the SPE solutions in this semi-stable time

frame. This observed change in peak area over time is consistent with references that state the need to deactivate glassware prior to Diquat

solution contact. In this analysis the SPE Diquat solution comes in contact with three different glass vessels. Diquat is not retained by the

chromatographic column, eluting in the void volume. However, the strong absorbance at 310nm allows for quantitation without interference.

Diquat Dibromide

2,3 Dihydroxynaphthalene

Diquat Dibromide

6

Time (min)

UA

m

20

30

45

40

0

35

25

10

0

5

15

50

Sorbent: IRIS MCX - 30 mg/1mLPart Number: IR54461Solution Conc: 10 µg/mL in H2O

Recovery Rates: Run 1 109.5%

Run 2 103.0% Run 3 101.6%

2,3 Dihydroxynaphthalene

12119764

Time (min)

mA

U

105 8

0

40

100

80

120

3

3 41 2 5

N+

N+

Br

Br

OH

OH

Sample Preparation


Applications - Food & AgricultureSorbent: IRIS MCX - 200 mg/6mLPart Number: IR54445 Solution Conc: 1 mg/mL in H2O

Recovery Rates: Melamine

97%

Melamine

Thiamphenicol, Florfenicol, Chloramphenicol

Melamine

Internal Standard

Sorbent: IRIS N - 30 mg/1mLPart Number: IR44461Solution Conc: 5 µg/mL in H2O

Recovery Rates: Thiamphenicol Florfenicol Chloramphenicol Run 1 98.4% Run 1 99.1% Run 1 99.3% Run 2 99.7% Run 2 101.1% Run 2 100.3% Run 3 99.2% Run 3 100.4% Run 3 99.8%

Note 1: Elution from the IRIS N SPE cartridge was performed with 70% CH3CN. While 100% CH3CN appeared to fully elute the compounds, the chromatographic peak shape was significantly better

when the SPE elution solvent was less than 100% CH3CN. 70% was used because it was already prepared, lower CH3CN may lead to more improvement in chromatographic peak shape.

Florfenicol

Thiamphenicol

Chloramphenicol

1275

Time (min)

mA

U

5

10

25

30

9 11

Thiamphenicol

Florfenicol

35

Chloramphenicol

15

20

0

4 6 8 103

OH OH

C

CO

HNNO

O

OH CI

CIOO

OS HO

HN

Sample Preparation


Applications - Food & AgricultureCarbendazim, ThiabendazoleSorbent: IRIS MCX - 30 mg/1mL

Part Number: IR54461Solution Conc: 5 µg/mL in H2O

Recovery Rates: Carbendazim Thiabendazole Run 1 101.7% Run 1 99.1% Run 2 102.0% Run 2 100.1% Run 3 100.2% Run 3 98.0%

Thiabendazole

Carbendazim

Time (min)

mA

U

-1

4

19

4 6

Carbendazim

Thiabendazole

14

9

8 10 1220

29

24

34

SulfonamidesSorbent: IRIS WCX - 30 mg/1mLPart Number: IR84013Solution Conc: 5 µg/mL in H2O

Recovery Rates: Sulfadiazine Sulfathiazole Sulfamerazine Sulfamethazine Run 1 98.8% Run 1 95.0% Run 1 99.9% Run 1 99.5% Run 2 102.2% Run 2 98.1% Run 2 100.5% Run 2 99.4% Run 3 98.2% Run 3 93.8% Run 3 95.6% Run 3 96.5%

151375

Time (min)

mA

U

2

4

10

8

6

12

3 9 11

Sulfadiazine

Sulfathiazole

Sulfamerazine

Sulfamethazine

Sulfadiazine

Sulfathiazole

Sulfamerazine

Sulfamethazine

0

16

14

18

20

H2N

N

N

HNO

OS

Sample Preparation


Applications - Clinical & Bioanalysis

OH3CO

N

O

Hydrocodone

O

CH3

O

H

HO

H

N

Methylmorphine (Codeine)

O

HO

HO

H

N

Morphine

O

O

HO

H

N

Dihydrocodeine

OHOO CH3

O

H

N

6-acetylmorphine

O

HO

O

OH

N

Oxymorphone

Hydrocodone ISTD

Morphine ISTD

Oxymorphone Morphine

Dihydrocodeine

Hydrocodone

Oxycodone

Hydromorphone

6-acetylmophine

Codeine

Sorbent: IRIS MCX 200 mg/6mLPart Number: IR54445Solution Conc: 5 µg/mL in H2O

Recovery Rates: Hydrocodone 95% Dihydrocodeine 91% Methylmorphine (Codeine) 94% Oxycodone 104% Hydromorphone 93% Morphine 87% Oxymorphone 94%

Opiates

Antipsychotic DrugsSorbent: IRIS N - 30 mg/1mLPart Number: IR44461Solution Conc: 25 µg/mL in H2O

Recovery Rates: Risperidone 100% Quitiapine Fumerate 103% Domperidone 103%

Risperidone

Quetiapine Fumarate Domperidone

Sample Preparation


Applications - Clinical & BioanalysisPrednisone, Methylprednisolone,

Dexamethasone

Warfarin, Carbamazapine, Diphenhydramine

1917151375

Time (min)

UA

m

0

2

4

10

8

6

12

3 9 11

Prednisone

Methylprednisolone

14

Dexamethasone

Methylprednisolone

Prednisone

Dexamethasone

Sorbent: IRIS N - 30 mg/1mLPart Number: IR44461Solution Conc: 6 µg/mL in H2O

Recovery Rates: Prednisone Methylprednisolone Dexamethasone Run 1 100.7% Run 1 97.7% Run 1 100.0%

Run 2 99.5% Run 2 98.3% Run 2 98.0%Run 3 99.8% Run 3 99.9% Run 3 99.3%

Sorbent: IRIS N - 30 mg/1mLPart Number: IR44461Solution Conc: Warfarin (2 µg/mL), Carbamazapine (1 µg/mL), Diphenhydramine (5 µg/mL) in H2O

Recovery Rates: Warfarin Carbamazapine Diphenhydramine Run 1 93.8% Run 1 97.5% Run 1 100.4% Run 2 95.8% Run 2 98.0% Run 2 104.1% Run 3 94.2% Run 3 99.2% Run 3 106.1%

Warfarin

75

Time (min)

UA

m

10

30

4

Warfarin

Carbamazapine

100

Diphenhydramine

20

0

3 6 8

40

50

60

70

80

90

2

Note: Elution of the hormones from the IRIS N SPE cartridge was performed with 60% CH3CN. It was found that lower recoveries were obtained when using 100% CH3CN.

Diphenhydramine

ON

CH3

CH3

Carbamazapine

N

O NH2

O

O

OHO

O

O

OHHO

HOH

H

H

H

F

H3C

H3CCH3

OHHO

H

HH

O

CH3

CH3

CH3

CH20H

CO

HO OH

HH

H

O

O

O

O

LC Columns


PARTISPHERE® CARTRIDGE SYSTEM

• Void-sealing cartridge system• Convenient and easy to use• Hand tightened fittings

PartiSphere® silica is manufactured by Hichrom Ltd. The material is only readily available in the PartiSphere cartridge system.

PartiSphere Phases Functional Group Particle

shapeParticle Size

(µm)Pore Size

(Å)Surface Area

(m2/g)Carbon Load

(%)

C8 Octyl Spherical 5 120 160 6C18 Octadecyl Spherical 5 120 160 11SAX Quaternary Ammonium Spherical 5 120 160 -SCX Benezenesulphonic Acid Spherical 5 120 160 -

Further PartiSphere® materials are available.

Void-sealing cartridge systemThe system is characterized by a void-sealing mechanism. If a void eventually occurs at the top of the column bed, a simple tightening of the locking head will move the cone-sealing cylinder and frit downwards until it creates the zero-void configuration of the original cartridge. Large knurled end fittings allow ready hand-tightening of the system.

PartiSphere guard cartridge systemAdditional installation of the guard cartridge holder (WH4631-0003)allowsuseofguardcartridges(Figure1).

Figure 1. PartiSphere cartridge system

End fittings (WH4631-0001)

Guard cartridge holder (WH4631-0003)

PartiSphere Phase Catalogue No.

125 x 4.6mm replacement cartridge (1/pk)C8 WH4621-0503C18 WH4621-0502SAX WH4621-0505SCX WH4621-0507250 x 4.6mm replacement cartridge (1/pk)C18 WH4621-1502SAX WH4621-1505SCX WH4621-1507AccessoriesSpare end fitting WH4631-1001

PartiSphere Phase Catalogue No.

Replacement guard cartridges (5/pk)Reversed-phase WH4641-0002Anion exchange WH4641-0005Cation exchange WH4641-0007Accessories for guard cartridgesGuard Cartridge Holder (1/pk) WH4631-1003

Ordering Information - Cartridges

Analytical cartridges Guard cartridges

LC Columns


PARTISIL® ISO 9001:2000ISO 14001:2004

• Irregular porous silica• 5 and 10µm particle sizes• Hichrom high efficiency

Partisil®, manufactured by Hichrom Ltd., was one of the first commercially available irregular silicas. A large surface area gives it a high loading capacity.

Partisil® ion-exchange materials are still widely used today.

Partisil® Phases Functional Group Endcapped Particle Size

(µm)Pore Size

(Å)Surface Area

(m2/g)Carbon Load

(%)

Silica Octyl - 5,10 85 350 -C8 Octadecyl Yes 5,10 85 350 9ODS Octadecyl No 10 85 350 5ODS2 Octadecyl Yes 10 85 350 15ODS3 Octadecyl Yes 5,10 85 350 10.5PAC Amino-cyano Np 5,10 85 350 16SAX Tetramethyl Ammonium No 10 85 350 10SCX Sulphonic Acid No 10 85 350 10

1 Use with free-standing holder HI-161 and column coupler HI-081.2 Starter kits also available.

Please contact us for ordering information on column dimensions not listed

Partisil® Phase 5µm

Column Dimensions (mm) Guard Cartridges1

(For 3.2mm-4.0mm i.d. columns)50 x 3.2 150 x 3.2 250 x 3.2 50 x 4.6 150 x 4.6 250 x 4.6

Silica P5-50AS P5-150AS P5-250AS P5-50A P5-150A P5-250A P5-10C5C8 P5C8-50AS P5C8-150AS P5C8-250AS P5C8-50A P5C8-150A P5C8-250A P5C8-10C5ODS P5ODS3-50AS P5ODS3-150AS P5ODS3-250AS P5ODS3-50A P5ODS3-150A P5ODS3-250A P5ODS3-10C5PAC P5PAC-50AS P5PAC-150AS P5PAC-250AS P5PAC-50A P5PAC-150A P5PAC-250A P5PAC-10C5

Partisil® Phase 10µm

Column Dimensions (mm) Guard Cartridges1

(For3.2mm-4.0mmi.d.columns)250 x 4.6Silica P10-250A P10-10C5C8 P10C8-250A P10C8-10C5ODS P10ODS-250A P10ODS-10C5ODS2 P10ODS2-250A P10ODS2-10C5ODS3 P10ODS3-250A P10ODS3-10C5PAC P10PAC-250A P10PAC-10C5SAX P10SAX-250A P10SAX-10C5SCX P10SCX-250A P10SCX-10C5

Ordering Information - Partisil® ColumnsMicrobore (1.0mm - 2.1mm ID) and analytical (4.0mm ID) columnsPlease contact us for further details of 1.0mm, 2.1mm and 4.0mm ID Partisil columns as well as Partisil original part numbers.

Medium bore (3.2mm ID) and analytical (4.6mm ID) columns

LC Columns


ULTRASPHERE® (Hichrom)(Formerly Beckman) • Spherical porous silica• 3 and 5µm particle sizes• Specific ion-pair reversed-phase column• Widely referenced silica

Ultrasphere®, by Hichrom, is a classical silica which boasts a high performance reputation. In addition to the base silica, four phases (5μmparticlesize)areavailable instandardcolumns-UltrasphereC8,C18,cyanoandIP(ion-pair).

UltrasphereC8andC18arealsoavailableas3μmparticlesizesilicas packed into the XL High Speed Cartridge Columns.

Ultrasphere Phases Endcapped Particle Size

(µm)Pore Size

(Å)

Silica - 5 80C8 Yes 3,5 80ODS Yes 3,5 80CN No 5 80IP (C18) Yes 5 80


1 Use analytical cartridge and guard cartridge in XL holder assembly US237060. Contains 3µm particle size silica.2 Contains 5µm particle size silica.

Ultrasphere Phases

XL Cartridge ColumnDimensions1 (mm)

Column Dimensions2 (mm)

Analytical Guard (2pk) Analytical Guard70 x 4.6 5 x 4.6 150 x 4.6 250 x 4.6 250 x 2.0 45 x 4.6

Silica - - US235342 US235341 US237392 US244011C8 US237501 US237521 US235333 US235332 US237396 US243532ODS US237500 US237520 US235330 US235329 US244434 US243533CN - - US244070 US244071 US237394 US244072C18 Ion-Pair (IP) - - US235334 US235335 - US243534

Batch to batch reproducibilityThe reproducibility of batches of Ultrasphere ODS is shown in Figure 1. Resultant columns have minimal selectivity differences (<5%).

Ultrasphere-XL high speed cartridge columnIn this cartridge design, the guard cartridge is directly abutted to the analytical cartridge. This integral design was one of the first of its type to minimize dead volume between the two cartridges.

Figure 1. Carbon load (%) for batches of Ultrasphere ODS

ISO 9001:2000ISO 14001:2004

LC Columns


1)Octadecylmonolayerphasebondedtosphericalsilica particles with pore size of 100Å, a surface area of 450m2/g and a pore volume of 1.1 ml/g.2)Impurities: Al < 1ppm, Fe < 1ppm, Ti < 1ppm, Zr < 1ppm3)Doubleboundendcapping.4)pHstabilityfrom1.5to10,becauseof the unique stable endcapping.5)Excellentpeaksymmetryeven with strong bases

ReproSil®- Pur Basic & ReproSil® Gold (Maisch)

• Porous spherical silica• Specifically designed for pharmaceutical and biotechnical separations• Fully validated columns• Ideal for LC-MS • Excellent reproducibility

ReproSil Phases

Particle Size (µm)

Pore Size (Å)

Surface Area (m2/g)

Carbon Load (%) Endcapping

Reprosil-Pur Basic C18 1.8, 2, 3, 5, 10 100 450 17 BidentateReprosil-Pur Basic C18-HD 3, 5, 10 100 450 25 BidentateReprosil-Pur Basic C8 3, 5, 10 100 450 15 BidentateReprosil-Pur Basic C8-2 3, 5, 10 100 450 12 Bidentate

Reprosil Gold C18 3, 5, 10 120 320 20 BidentateReprosil Gold 200 C18 5, 10 200 180 14 BidentateReprosil Gold 300 C18 5, 10 300 120 8 Bidentate



Features of Reprosil®-Pur and Reprosil® Gold - the high purity phases (99.999%)

Comparison - C18 Phases

Reprosil®-Pur Basic-C18

High Speed HPLC- Reprosil® Gold

Please contact us for ordering information

LC Accessories


Ordering Information - Pump Replacement Parts

REPLACEMENT PARTS - AGILENT™ Compatible 1200/1100/1050

For replacement Electron Multipliers, please visit chrom4.com

Check cleanliness of flow cell every 6 months

Ordering Information - Lamps

D2 Lamp comparison test data

Instrument: Agilent MWD G1365DD2 lamp: Agilent Chrom4 CL4-AgDADLLSelf test mode: Single

Test items RequirementAgilent Chrom4

Data measured Result Data measured Result

Min. intensity (190nm - 220nm) > 2000 cts 9062 cts passed 10944 cts passed




Max. intensity (190nm - 350nm) < 450000 cts 50824 cts passed 65979 cts passed

Max. intensity (700nm - 950nm) < 300000 cts 40411 cts passed 39539 cts passed

Max. intensity (D2 alpha line) < 1200000 cts 98459 cts passed 107132 cts passed

Wavelength at 486.0nm 485.5 ~486.5 nm 485.94 nm passed 485.76 nm passed

Wavelength at 656.1nm 655.6 ~656.6 nm 656.07 nm passed 655.94 nm passed

Holmium test -1 ~ 1 nm 0.30 nm passed 0.40 nm passed

Spectral flatness < 0.002 AU 0.0000 AU passed 0.0000AU passed

ASTM noise (20 min. at 254nm) ≤ 0.02 mAU 0.0124 mAU passed 0.0115 mAU passed

Pump Replacement Parts

Replacement Part Number

OEM Part

Typical Maintenance Schedule

PTFE Frits for model 1200/1100/1050 5/pack CHR07-000-5 01018-22707 Change every 6 monthsPiston Seal, UHMW-PE for model 1200/1100/1050 - pk 10 CHR01-000-10 0905-1420 Change every 6 monthsPiston Seal, UHMW-PE for model 1200/1100/1050 - each CHR01-000 0905-1420 Change every 6 monthsPiston Seal, Black PTFE for model 1200/1100/1050 - pk 10 CHR01-200-10 5063-6589 Change every 6 monthsPiston Seal, Black PTFE for model 1200/1100/1050 - each CHR01-200 5063-6589 Change every 6 monthsUHMW PE Plunger Wash Seal for models 1200/1100/1050 CHR01-002-10 n/a Change every 6 monthsBlack PTFE Based Plunger Wash Seal for models 1200/1100 CHR01-202-10 n/a Change every 6 monthsReplacement Piston for model 1200/1100/1050 CHR02-000 5063-6586 Change every 6 monthsOutlet Check Valve Assembly for model (Quaternary&Isocratic)1200/1100/1050

AS-250-1417 G1311-60012 Change every 6 months

Oulet Check Valve cartridge only for model 1200/1100/1050 AS-250-1397 n/a Change every 6 monthsOutlet Check Valve Assembly (Binary Pump)for1200/1100/1050(400bar)

AS-250-1496 G1312-60012 Change every 6 months

Sieves, Outlet Valve 10/pk for model 1200/1100 CHR07-001-10 5063-6505 Change every 6 monthsActive Inlet Cartridge(400bar)formodel1200/1100/1050 AS-250-2300 5062-8562 Change every 6 months

Deuterium Lamps


OEM Part


VWD UV Lamp / 2000hr, Agilent models 1200, 1100, G1314 CL4-1314 G1314-60100 Change every 2000 hrs or 6 months, whatever comes firstDiode Array Lamp / 2000hr, Agilent 1200, 1100, G1315A, G1365A CL4-AgDADLL 5182-1530

LC Accessories

[email protected] :: www.chrom4.com [email protected] :: www.chrom4.com

REPLACEMENT PARTS - SHIMADZU

For replacement Electron Multipliers, please visit chrom4.com



Instrument: Shimadzu LC SPD-10AvpD2 lamp: Shimadzu 228-34016-02 Chrom4 CL4-SPD10-20

Test items RequirementShimadzu Chrom4

Data measured (Ref.)

Result Data measured (Ref.)

Result

Intensity at 220.0nm > 800 cts 1459 cts passed 1628 cts passed

1 h. drift ave. (1 h at 250.0nm) < 3 x 10-4 Au/HR 1.1 x 10-4 Au passed 1.1 x 10-4 Au passed

10 min. noise ave. (10 min. at 250.0nm) < 1 x 10-5 Au 0.57 x 10-5 Au passed 0.57 x 10-5 Au passed


Deuterium Lamps


OEM Part


Deuterium Lamp, SPD-10, SPD-10AS, SPD-10AV, SPD-10Avp, SPD-20

CL4-SPD10-20 228-34016-02 Change every 2000 hrs or 6 months, whatever comes first

Deuterium Lamp, SPD-20A LS-00136PL 228-34016-00



OEM Part Qty

Piston Seal-UHMW-PE for models LC-600, LC-9A, LC-10AD, LC-10ADVP, LC 2010, LC-20AB, LC-20AD

CHR01-060 228-35146-00 each

Piston Seal-UHMW-PE for models LC-600, LC-9A, LC-10AD, LC-10ADVP, LC 2010, LC-20AB, LC-20AD

CHR01-060-10 228-35146-00 \10

Piston Seal-Teflon for models LC-600, LC-9A, LC-10AD, LC-10ADVP, LC-2010, LC-20AB, LC-20AD

CHR01-260 228-35146-00 each

Piston Seal-Teflon for models LC-600, LC-9A, LC-10AD, LC-10ADVP, LC-2010, LC-20AB, LC-20AD

CHR01-260-10 228-35146-00 \10

Piston for models LC-600, LC-9A, LC-10AD, LC-20AB CHR02-060 228-18523-91 eachPiston for models LC-10ADVP, LC-20AD CHR02-061 228-35601-91 eachInlet Check valve assembly for models LC-600, LC-9A, LC-10AD, LC-20AB AS-250-1480 228-18522-91 eachInlet Cartridge for models LC-600, LC-9A, LC-10AD, LC-20AB AS-250-1460 n/a eachOutlet Check Valve assembly for models LC-600, LC-9A, LC-10AD, LC-20AB AS-250-1485 228-18522-92 eachOutlet Cartridge for models LC-600, LC-9A, LC-10AD, LC-20AB AS-250-1465 n/a eachInlet Cartridge assembly for models LC-10ADVP, LC-20AD AS-250-1481 228-390939-92/228-45704-91 eachInlet Cartridge for models LC-10ADVP, LC-20AD AS-250-1461 n/a eachOutlet Cartridge assembly for models LC-10ADVP, LC-20AD AS-250-1486 228-34976-91/228-45705-91 eachOutlet Cartridge for models LC-10ADVP. LC-20AD AS-250-1466 n/a each

LC Accessories


REPLACEMENT PARTS - WATERS

Ordering Information - PM Kits


Instrument: Waters LC 996D2 lamp: Waters WAT052586 Chrom4 CL4-996-2996

Test itemsWaters Chrom4

Data measured Result Data measured Result

Intensity at 230nm 43900 cts passed 52500 cts passed







Intensity at 254.0nm 34978 cts passed 35023 cts passed

10 min. drift ave. (10 min. at 254.0nm) 0.152 mAU passed 0.163 mAU passed

10 min. noise ave. (10 min. at 254.0nm) 0.0334 mAU passed 0.0326 mAU passed

Replacement parts also available for Dionex, Hitachi, Gilson/Rainin, SSI and VarianPlease contact us for part number and ordering information.

PM Kits


OEM Part Qty

Pump PM Starter Kit for model 600, includes 2 Piston Seals, 2 Inlet CV, 2 Oulet CV, 2 Pistons, 4 SST Solvent Filters

AS-270-0755 WAT052675 each

Pump PM Kit Alliance 2690/95, includes: 2 Piston Seals, 4 Pump Head Face Seals, 2 Inlet/Oulet Cartridges, 2 Pistons, 4SST Solvent Filters

AS-270-0944 WAT270944 each


Deuterium Lamps


OEM Part


Deuterium Lamp, Model 996, 2996 CL4-996-2996 WAT052586 Change every 2000 hrs or 6 months, whatever comes firstDeuterium Lamp, Model 2487, 2488 CL4-2487-2488 WAS081142

LC Accessories


REPLACEMENT PARTS - WATERS




OEM Part Qty

Inlet Check Valve Assembly for models M45, 45G, 510, 515, 590, 1515, 1525(Analytical), 6000, 6000A, LCM1

AS-250-1120 WAT033679/ 700000253 each

Outlet Check Valve Assembly w/Adapter Seal for models M45, 45G, 510, 515, 590, 1515, 1525 (Analytical), 6000, 6000A, LCM1

AS-250-1125 WAT025216/ 700000253 each

Adapter Seal fo Outlet CV for models M45, 45G, 510, 515, 590, 1515, 1525 (Analytical), 6000, 6000A, LCM1

AS-250-1135-5 n/a \5

Inlet Check Valve Assembly for models M501, 600, 600E, 610 AS-250-1020 WAT033679/ 700000253 eachOutlet Check Valve Assembly for models M501, 600, 600E, 610 AS-250-1127 WAT025216/ 700000253 eachAdaptor Seal for Outlet CV models M501, 600, 600E, 610 AS-250-1137-5 n/a \5Inlet/Outlet Check PEEK cartridges for models 2690/95, 2790/95/96,Direct replacement

AS-250-1070 WAT270941 each

Piston Seal - UHMW-PE for models M45, 45G, 501, 510, 515, 590, 600, 600E, 610, 1515, 1525 (analytical), 6000, 6000A, LCM1

CHR01-090 WAT022934/ WAT022946 each

Piston Seals - UHMW-PE for models M45, 45G, 501, 510, 515, 590, 600, 600E, 610, 1515, 1525 (analytical), 6000, 6000A, LCM1

CHR01-090-10 WAT022934/ WAT022946 \10

Piston Seal - Teflon for models M45, 45G, 501, 510, 515, 590, 600, 600E, 610, 1515, 1525 (analytical), 6000, 6000A, LCM1

CHR01-290 WAT026613 each

Piston Seal - Teflon for models M45, 45G, 501, 510, 515, 590, 600, 600E, 610, 1515, 1525 (analytical), 6000, 6000A, LCM1

CHR01-290-10 WAT026613 \10

Piston Seal - UHME-PE for models Alliance 2690/95, 2790/95/96 AS-200-0210 WAT270938 eachPiston Seals - UHME-PE for models Alliance 2690/95, 2790/95/96 AS-200-0215 WAT270938 \10Seal Wash Piston Seal - UHMW-PE for models Alliance 2690/95, 2790/95/96 AS-200-0220 WAT271018 eachSeal Wash Piston Seals - UHMW-PE for models Alliance 2690/95, 2790/95/96 AS-200-0225 WAT271018 \10Seal Wash Face Seal - UHMW-PE for models Alliance 2690/95, 2790/95/96 AS-200-0230 WAT271017 eachWash Tube Seal- UHMW-PE for models Alliance 2690/95, 2790/95/96 AS-200-0240 WAT270940 eachPump Head Face Seal-UHMW-PE for models Alliance 2690/95, 2790/95/96 AS-200-0250 WAT270939 eachHead Plunger Seal for models Acquity, nanoAcquity CHR01-091 700002599 \2Wash Seal for models Acquity, nanoAcquity CHR01-092 700002598 \2SS Solvent Filter for models Acquity, nanoAcquity CHR07-023 700003616 \7Piston with Sapphire Rod for models M45, 45G, 501 CHR02-091 WAT026524 eachPiston with Sapphire Rod for models M510, 515, 590, 600, 610, 1515, 1525 (analytical),6000, 6000A, LCM1

CHR02-092 WAT025656 each

Piston with Sapphire Rod for models Alliance 2690/95, 2790/95/96 CHR02-093 WAT270959 eachPrimary Check Valve Assembly, Acquity UPLC AS-250-1497 WAT700002596 eachAcquity Intelligent Valve Assembly AS-250-1498 WAT700003563 eachCheck Valve Double Ball & Seat, Acquity UPLC AS-250-1499 WAT700005164 each

LC Accessories


Pumps

ASI HPLC Pumps

• Self-priming pump head requires no manual priming

• Patented “Floating Pump Seal” design forextended seal wear

• Available with micro, analytical, semi-prep andprep pump heads

• UHPLC versions for pressures up to 15,000 psi

• Programmable solvent compressibility compensation

• Easy maintenance and service for all wetted parts

• Integral prime/purge assembly for quicksolvent change

The ASI HPLC pump is designed with the chromatographer in mind. It can be used as a reliable low cost isocratic pump or integrated into a gradient HPLC System. In either case, the pump incorporates several key features which make it truly one of a kind in the world of HPLC Pumps.

Isocratic Model 501

The Model 501 is a high performance, compact solvent delivery module that has been designed to compete with the most expensive pump systems on the market in reliability and performance without the high cost. A dual piston design with solvent compressibility feedback assures virtually pulse-free and accurate solvent delivery. The Model 501 has all of the features of the Model 500, but without gradient programming capability. It may be used as an economical stand alone pump for isocratic operation, or in conjunction with a Model 500 for gradient opera tion.

Model 500

The Model 500 has been designed to convert the Model 501from an isocratic pump to a gradient HPLC system. Full operation and gradient control programming is achieved through the keypad on the front panel of the Model 500. The Model 500 includes a high pressure integral static mixer, connecting tubing, and all the accessories necessary to quickly convert the Model 501 to gradient operation.

Model 500G

The Model 500G is a complete high pressure gradient HPLC system. The system includes one Model 501, one Model 500, and all necessary electrical and plumbing connections.

Pump Head Flow Rate Range Pressure Rating

Micro Head 0.5 µL/min. to 4 mL/min 6,000 PSI MaxAnalytical Head 1.0 µL/min. to 10 mL/min 6,000 PSI MaxSemi-Prep Head 0.050 mL/min. to 20 mL/min 2,500 PSI MaxPrep Head 0.100 mL/min. to 80 mL/min 1,000 PSI Max

Isocratic Model 501 Gradient System 500G

HPLC PumpsPart No. Description

AS-501-0002* Model 501, Micro Head, StandardAS-501-0002HP* Model 501, Micro Head, High PressureAS-501-0000* Model 501, Analytical Head, StandardAS-501-0020* Model 501, Semi Prep Head, StandardAS-501-0040* Model 501, Prep Head, StandardAS-500G-0000* Gradient System, Analytical HeadAS-500G-0002* Gradient System, Micro HeadAS-500G-0002HP* Gradient System, Micro Head, High PressureAS-500G-0020* Gradient System, Semi-Prep HeadAS-500G-0040* Gradient System, Prep Head

* Please specify your local required line voltage for the above items

Replacement Pump Head AssembliesPart No. Description

AS-A500-1000 Spring Housing w/ Micro 2mL Pump Head Assembly

AS-A500-1001 Spring Housing w/ Analytical 10mL Pump Head Assembly

AS-A500-1002 Spring Housing w/ Semi-Prep 20mL Pump Head Assembly

AS-A500-1003

Replacement Check Valves

Spring Housing w/ Prep 80mL Pump Head Assembly

Part No. DescriptionAS-A500-1133 2mL Pump Head Inlet/Outlet Check Valve Cartridge

AS-A500-1050 10mL Pump Head Inlet/Outlet Check Valve Cartridge,20mL and 80mL Pump Head Outlet Check Valve Cartridge

AS-A500-1060 20mL and 80mL Pump Head Inlet Check Valve Cartridge

Replacement Piston SealsPart No. Description

AS-A500-1009-U-2 2mL Pump Head Piston Seal Assembly, UHMW /2pkAS-A500-1009-U-10 2mL Pump Head Piston Seal Assembly, UHMW /10pkAS-A500-1006-T-2 10mL Pump Head Piston Seal Assembly, Teflon /2pkAS-A500-1006-T-10 10mL Pump Head Piston Seal Assembly, Teflon /10pkAS-A500-1006-U-2 10mL Pump Head Piston Seal Assembly, UHMW /2pkAS-A500-1006-U-10 10mL Pump Head Piston Seal Assembly, UHMW /10pkAS-A500-1026-U-2 20mL Pump Head Piston Seal Assembly, UHMW /2pkAS-A500-1026-U-10 20mL Pump Head Piston Seal Assembly, UHMW /10pk

Replacement PistonPart No. Description

AS-A500-1117 2mL Pump Head Piston Assembly, CeramicAS-A500-1116 10mL Pump Head Piston Assembly, SapphireAS-A500-1024 20mL Pump Head Piston Assembly, SapphireAS-A500-1044 80mL Pump Head Piston Assembly, Ceramic

LC Accessories


Precolumn, Inline Filters and Guard Columns

• Economical protection against micro-particles• Extends LC/UHPLC column lifetime

• Negligible effect on column performance• Universal fit

Part No. Description Qty.

AS-850-1010 UHPLC UltraShield PreColumn Filter, 0.5 micron x 0.62” dia. SST Frit eachAS-850-1020-062 Direct Connect Column Filter, 0.5 micron x 0.62” dia. SST Frit eachAS-850-1025-062 In-Line Column Filter, 0.5 micron x 0.62” dia. SST Frit eachAS-850-1025 In-Line Column Filter, 0.5 micron x 0.125” dia. SST Frit eachAS-850-1025-188 In-Line Column Filter, 0.5 micron x 0.188” dia. SST Frit eachAS-850-1050T ColumnShieldPreColumnFilter(PEEK),0.5 micron x 0.62” dia. Titanium Frit each


AS-850-1020-062

AS-850-1020-01 Replacement Filter

AS-850-1025

UltraShield Precolumn Filter

• UltraShield direct connect precolumn filters were engineered specifically for use in fast, high efficiency separations

Direct Connect Precolumn Filter • UltraShield direct connect precolumn filters were engineered specifically for use in high throughput and routine LC separations.

PrimeLine In-Line Filter • PrimeLine in-line filters were engineered and designed to be used anywhere within an LC system where additional filtration is required.requiring high mobile phase velocities and ultra high pressure.

ColumnShield Precolumn Filter • ColumnSaver direct connect precolumn filters were engineered to minimize dead volume specifically for use in fast, high efficiency separations requiring high mobile phase velocities.

AS-850-1010AS-850-1050T

Precolumn and Inline Filters

• Extends column lifetime by removing contaminants and particulates• Leak free connection to most manufacturers UHPLC/HPLC columns, 2.1mm - 4.6mm ID• Pressure rated to 20,000psi (1,378bar)

• Re-usable holder• Cartridges packed with

media for maximum column protection• Simple, quick and easy removal and replacement

of disposable cartridge

Part No. Description Qty.

AS-850-1390-3HH Guard Column Housing, 5mm long eachAS-850-1392-04 Guard Column Cartridge, 2mm x 5mm long, packed /5

Quick&Easy Guard Column Housing and Cartridge


[email protected] :: www.chrom4.com

LC Accessories


Flow Splitters and Mixers

HyperShear™ LC and UHPLC Mixers

Biocompatible PEEK also available (Low flow,analyticalflow&highflowonly).

Complete assemblies available. Please enquire.

Comparison data available HyperShear™ Static Mixers vs Agilent 1100 packed bed static mixer and Shimadzu LC-10ADvp. Please contact us.

Part No. Description

Adjustable Flow Splitters

AS-600-PO10-04 Adjustable Flow Splitter, Analytical Range, 0.25mL/min. to 5mL/min. Input Flow, Default Calibration Flow = 1.0mL/min., Split Ratio=5:1 to 100:1

AS-600-PO10-06 Adjustable Flow Splitter, Analytical Range, 0.25mL/min. to 5mL/min. Input Flow, Default Calibration Flow = 1.0mL/min., Split Ratio=1:1 to 20:110:1

Fixed Flow Splitters

AS-620-PO10-09 Fixed Flow Splitter, Analytical Range, 0.1mL/min. to 5mL/min. Input Flow, Default Calibration Flow = 1.0mL/min., Split Ratio=20:1





AS-620-PO10-CS Fixed Flow Splitter, Analytical Range, 0.1mL/min. to 5mL/min. Input Flow, Default Calibration Flow = 1.0mL/min., Split Ratio=Custom

Adjustable Flow Splitter

Binary Fixed and Multiport Flow Splitters* Does not come with mounting bracket - AS-620-1000

Fixed/adjustable, semi-prep/prep, multiport, post- and pre-column flow splitters available.

Replacement resistor sets also available. Please contact us.

Ordering Information - Flow Splitters


Part No. Description

Micro Mixer Assemblies (0.5 μL - 25 μL) , Maximum Pressure 6,000PSIAS-402-0010 BinaryTeeMixerAssemblySS10μLAS-402-0025 BinaryTeeMixerAssemblySS25μLLow Flow Mixer Assemblies (50 μL - 250 μL)AS-411-0050 In-LineMixerAssemblySS50μLAS-411-0150 In-LineMixerAssemblySS150μLAS-411-0250 In-LineMixerAssemblySS250μLAS-412-0050 BinaryTeeMixerAssemblySS50μLAS-412-0150 BinaryTeeMixerAssemblySS150μLAS-412-0250 BinaryTeeMixerAssemblySS250μL

Analytical Mixer Assemblies (350 μL and 500 μL)AS-421-0350 In-LineMixerAssemblySS350μlAS-421-0500 In-LineMixerAssemblySS500μLAS-422-0350 BinaryTeeMixerAssemblySS350μLAS-422-0500 BinaryTeeMixerAssemblySS500μL

Dissolution Essentials

[email protected] :: www.chrom4.com [email protected] :: www.chrom4.com [email protected] :: www.chrom4.com

Quartz Spectrophotometer Cells

Ordering Information - Quartz Cells and Reference StandardsFor Agilent, Buck Scientific, Hitachi, Jasco, Shimadzu, Thermo Scientific and PerkinElmer

Quartz CellsTraceableCalibratedCertified reference material

What is calibration?Calibration is the process of establishing how the response ofa measuring device varies with respect to the instrument para-meter being measured. The usual way to perform calibrationis to measure the parameter (e.g. using a reference material)and monitor the instrument response

Why is calibration important?Place any equipment in the environment of choice, and imme-diately the chosen environment will begin to act on that equip-ment causing change and ultimately degradation in perfor-mance. This so called drift causes your results to becomeunreliable and no longer “fit for their intended purpose”. Whiledrift cannot be eliminated it can be detected and containedthrough the process of calibration. In the pharmaceuticalindustry, a system where drift has occurred to an unaccept-able level is deemed to be “out of control”.

By inference, this same environment will also act on yourCertified Reference Materials, depending on how they arestored, etc. These materials must be checked/re-certified toensure that the values on which you are depending have notalso significantly changed.

Reference materials, Spectrophotometer FluorimeterColorimeter and flow cells soon available from Chrom4!

Chrom4 Quartz Cuvettes (cells) and Glass Cells

Chrom4 manufacturing, has many years experiencein the production of accessories for UV-Vis-NIR spectroscopyto meet all standard procedures found in analytical,clinical and research laboratories, especially QA environments.

A wide range of cells specifically designed for spectrophotometers are available from path lengths

of 1mm through to 100mm.

There are three basic designs of aperture. Path lengths below1mm are measured interferometrically. The rectangular cellsare serial numbered and fully traceable.

Part No. (each) DescriptionRectangular CellsC4QC-1 1 mm UV Quartz Cell

C4QC-2 2 mm UV Quartz Cell









Introduction to Dissolution

Dissolution Essentials -Chrom4: The Dissolution Essential SpecialistsCHROM4 fulfills the various needs of the dissolution industry by carrying a full line of consumables and accessories for various brands and models of dissolution testing machines.

CHROM4 produces the highest quality products to the entire pharmaceutical industry. All of their products are both USP and machine manufacturer compliant.

The product line consists of items specifically designed to fit the many different brands of dissolution testing equipment. Dissolution Essentials manufactures products dedicated to specific instruments, such as Distek, Sotax, VanKel and Hanson.

In this section, we have included the most common dissolution accessories.

For more product information, please browse our website and discover why CHROM4 is the superior alternative for dissolution essentials.

What can you expect from us?

• Baskets• Basket Shafts • Cannula Filters • Capsule Sinkers • Disintegration Testing • Dissolution Media• Dissolution Vessels

• Intrinsic Dissolution • Paddles • Sampling Cannula • Spin Shaft Accessories• • Tubing• USP Apparatus 3• USP Apparatus 5 & USP Apparatus 6

For more information, please contact us!www.CHROM4.com

AswellasCaleva,CaliperLifeSciences(Zymark),Electrolab, Erweka, Logan, Pharmatest and Toyama

CHROM4 is not affiliated with any of the companies listed above, or their products. Products listed under the companies above are compatible with their instrumentation.



Vessels and CoversVesselsSome suppliers offer “one size” generic vessels for all dissolu-tion baths, however, replacing a vessel with one not specifical-ly designed for the instrument could impair vessel centering. Also, larger or smaller vessel inside diameters can change hydrodynamics. Both variables could impact dissolution rates.

CHROM4dissolutionvesselscomplywithUSP(711)andwiththe associated original equipment manufacturers dimensional specifications. This is extremely important because the ves-sels associated with various dissolution baths are not dimen-sionally the same.

High Precision Vesselvessels provide ultimate dimensional accuracy• Sphericity less then .10mm • Spherical radius 50.03+/- 0.08mm• Cylindricity less then 0.17mm

High Precision vessels offer ultimate control of dissolution variables and assist with dissolution instrument calibration to ASTM E 2503-07 requirements.

Key Features:• Fits directly into the dissolution bath• Does not require Centering Ring • Comes standard with individual certificates• Inside bottom extremely close to true hemisphere - Sphericity• Extremely low tolerance of radius of inside bottom • Inside cylindrical body extremely close to true circle - Circularity• Agreement of both centers of cylindrical body and bottom - Concentricity• Inside cylindrical body extrmely close to true cylinder - Cylindricity• Vessel center nearly perfect vertical and guaranteed by the concentricity • Extremely low tolerance of inside diameters of cylindrical body• Extremely low vessel-to-vessel variation in configuration• ASTM, USP, BP, EP, JP and associated pharmacopeia compliant

Bath Manufacturer Model No. Description OEM Part No. (each)Hanson SR8+ Multi-Dose Centering Ring 69606 C4-HAVAR69606Distek 2100 A, B & C Plastic Centering Ring 3350-0096 C4-DKPCR

Ordering Information - High Precision Vessel

Ordering Information - Vessel Adaptor Ring

C4-DKC900PSC4-A900ASTM

Ordering Information - Dissolution Vessels and Covers

Part No. (each) Description OEMDistek

C4-DKC900PS Serialized 1000mL Premier Glass Vessel (no centering ring for use in waterlessbathdissolutionsystems) -

C4-DKC900S 1000mL Clear Glass Vessel, No Ring, Serialized 3010-0069C4-DKA900S 1000mL Amber Glass Vessel, No Ring, Serialized -C4-DKA900CRS 1000mL Amber Glass Vessel, Centered, Serialized 3010-0023C4-DKC900CRS 1000mL Clear Glass Vessel, Centered, Serialized 3010-0093C4-DKPCR Plastic Centering Ring for Distek Vessels 3350-0096C4-DKCHC Clear Hinged Cover 3250-0089 Agilent (formerly VanKel/Varian) compatibleC4-VKC900S 1000mL Clear Glass Vessel, Serialized 12-5000C4-VKA900S 1000mL Amber Glass Vessel, Serialized 12-5010C4-VKC900CRS 1000mL Clear Glass Vessel, Centered, Serialized 12-5035C4-VKA900CRS 1000mL Amber Glass Vessel, Centered, Serialized 12-5020C4-VKCCS Clear Cover w/Paddle Slot 12-6300C4-VKACS Amber Cover w/Paddle Slot 12-6320HansonC4-HAC900S 1000mL Clear Glass Vessel, Serialized 72-600-510C4-HAA900S 1000mL Amber Glass Vessel, Serialized 72-600-556SotaxC4-SXC900S 1000mL Clear Glass Vessel, Serialized 2503C4-SXA900S 1000mL Amber Glass Vessel, Serialized 2503-2

C4-C900ASTM

Part No. (each) DescriptionC4-C900ASTM ASTM High Precision VesselC4-A900ASTM ASTM Amber High Precision Vessel

C4-DKPCR

Other vessel sizes available. Wesupplydissolutionvessels&coversforotherdissolutiontesting(Caleva,Erweka,PharmatestandZymark).Pleaseenquire.

NEW Toyama VesselsNow Available



Baskets, Shafts and Paddles

Baskets, Shafts and PaddlesCHROM4 offers both clip-on style and O-ring style baskets & basket shafts for most dissolution baths. Both meet the asso-ciated original equipment manufacturers dimensional specifi-cations. Both clip style and O-ring style baskets comply with USP (711) specifications. All CHROM4 baskets aremade from electropolished, sintered 316 stainless steel. The sintering process essentially creates a welded joint at each overlapping wire junction. Sintered baskets are stronger and last longer. They retain original dimensions and geometry and resist wobble. Clip-on style shafts utilize a proprietary, spring tempered clip, which retains the original gripping tension far longer than conventional shafts.

CHROM4 offers electropolished 316 stainless steel paddles.

Clip style and O-ring style shafts & paddles are precisely manufactured to limit rotational wobble to levels far below USP(711)specifications.

C4-DKBSK040

Ordering Information - Baskets, Shafts and Paddles

Other basket and basket shaft sizes and styles available. Paddles are also available in different sizes and PTFE coated or molded PTFE.Please enquire.

Part No. (each) Description OEMDistekC4-DKBSK040 40MeshBasket(USPStandardSizeMesh) 2821-0072C4-DKBSK040ES 40MeshBasket(USPStandardSizeMesh),EvolutionSeries 2800-0032C4-DKBSPOS 16.5” Basket Shaft, 316 SS, O-Ring/Push On Style 2821-0074C4-DKBSSCS 16.5” Basket Shaft, 316 SS, Spring Clip Style -C4-DKDS 16.5” Detachable Shaft, 316 SS 2800-0165C4-DKBAES Basket Adapter for Evolution Series Only 3200-0038C4-DKBCES Basket Clip for Evolution Series Only 3100-0017C4-DKPDE 16.5” Paddle, 316 SS, Electropolished 2800-0010 Agilent (formerly VanKel/Varian) CompatibleC4-VKBSK040 40MeshBasket(USPStandardSizeMesh) 12-2100C4-VKBSKPL040 40MeshPrecisionLengthBasket(USPStandardSizeMesh) -C4-VKBSSCSV 14.5” Basket Shaft, 316 SS, Spring Clip Style for V-Series 12-2073C4-VKBSSCS 15” Basket Shaft, 316 SS, Spring Clip Style 12-2070C4-VKBSCPOS 15” Conical Basket Shaft, 316 SS, O-Ring/Push On Style 12-2050C4-VKPDEV 14.5” Paddle, 316 SS, Electropolished for V-Series 12-1035C4-VKPDSE 15” Paddle, 316 SS, Electropolished 12-1030HansonC4-HABSK040 40MeshBasket(USPStandardSizeMesh) 65-220-000C4-HABSSCS 16” Basket Shaft, 316 SS, Spring Clip Style 65-237-000C4-HAPDE 16” Paddle, 316 SS, Electropolished 65-700-036Sotax C4-SXBSK010 10MeshBasket(USPStandardSizeMesh) -C4-SXBSK020 20MeshBasket(USPStandardSizeMesh) 9353C4-SXBSK040 40MeshBasket(USPStandardSizeMesh) 2830C4-SXBSKSUP Suppository Basket, Plastic -

Dissolution Basket Storage Prolong the life of baskets and save money

To ensure they meet USP requirements, it is essential that for all tests, baskets are not bent or deformed. The chanc-es of accidentally damaging baskets can be significantly reduced with the use of a good quality basket holder, such as C4-SDBH-12.

Key Benefits:• Compatible with all popular basket types (Caleva,Distek,Erweka,Hanson,Pharmatest,Sotax,VanKel,Zymark)• O-rings ensure baskets are held firmly to the holder• Stores up to 12 baskets• Fully stackable, letting you transport many baskets at a time• Low cost, it pays for itself by preventing damage to just one basket!

Part No. (ea) DescriptionC4-SDBH-12 Stackable Dissolution Basket Holder


NEW Sotax Basket Shafts

and paddlesNow Available

C4-SXBSKSH



Sampling Cannula and Cannula Filters

C4-HACAN

Distek Filter DiscDistek Cannula Filter

Part No. (each) Description OEMDistekC4-DKSSP900 900mL Standard Sampling Probe 2910-0900C4-DKSSP900-SH 900mL Standard Sampling Probe, Solid Housing 2910-0906C4-DKFD010 10MicronFilterDisks,(JAR/1000) 5720-0203C4-DKFIL010 10MicronPorousFilters,1/16”,(JAR/1000) 5720-0275C4-DKFD045 45MicronFilterDisks,(JAR/1000) 5720-0275C4-DKFIL045 45MicronPorousFilters,1/16”,(JAR/1000) 5720-0020-1000C4-DKFIL070 70MicronPorousFilters,1/16”,(JAR/1000) 5720-0503 Agilent (formerly VanKel/Varian) CompatibleC4-VKCAN 4.75’’(900mL)Bent316SSCannulaw/SSluerlock 12-3200C4-VKCANAS 4.5”(900mL)Auto-SamplingCannula 17-3300C4-VKFIL010 10MicronPorousFilters,(JAR/1000) 17-4000C4-VKFIL045 45MicronPorousFilters,(JAR/1000) -C4-VKFIL070 70MicronPorousFilters,(JAR/1000) 17-4020C4-VKFT010 10MicronFilterTips,(JAR/1000) 17-4120C4-VKFT045 45MicronFilterTips,(JAR/1000) 17-4140HansonC4-HACANPT 4.75”(900mL)Bent316SSCannulaw/SSpermtip -C4-HACAN 4.75”(900mL)Bent316SS1/8”ODCannulaw/SSluerlock 95-590-002C4-HACANPEEK 4.75”(900mL)BentPEEK1/8”ODCannulaw/PEEKluerlock 95-590-005C4-HAFIL010 10MicronPorousFilters,(JAR/1000) 27-101-091C4-HAFIL010-16 10MicronPorousFilters,1/16”,(JAR/1000) 27-101-093C4-HAFIL045 45MicronPorousFilters,(JAR/1000) -C4-HAFIL045-16 45MicronPorousFilters,1/16”,(JAR/1000) -C4-HAFIL070 70MicronPorousFilters,(JAR/1000) 27-101-092C4-HAFIL070-16 70MicronPorousFilters,1/16”,(JAR/1000) 27-101-094SotaxC4-SXCANLA 13”(900mL)Bent316SSCannulaw/lueradapterC4-SXCANSTS 13”(900mL)316SS1/8”ODCannulaw/stopperandsleeveC4-SXFIL010 10MicronPorousFilters,(JAR/1000) -C4-SXFIL035 35MicronPorousFilters,(JAR/1000) -C4-SXFIL070 70MicronPorousFilters,(JAR/1000) -

Ordering Information -Sampling Cannula and Cannula Filters

Part No. (each) Description SUN-SRi EquivalentC4-PL010 10MicronPorousFilters,(JAR/1000) 400105C4-PL035 35MicronPorousFilters,(JAR/1000) 400102C4-PL070 70MicronPorousFilters,(JAR/1000) 400107

Cannula stoppers and other sampling cannula and cannula filters also available. Please enquire.

Sampling Cannula and Cannula FiltersCHROM4 offers traditional manual and automated sam-pling cannula for most dissolution baths. In addition to “traditional” cannula, CHROM4 offers an extensive selec-tion of “innovative”, DE designed cannula. These cannula include PEEK cannula, improved filter housing cannula and a low cost cannula which offers significant cost savings without sacrificing quality.

Probe tip filters for most sampling methods are available in numerousmicronratings(from1umto70um)andtheyareavailable in packs of 1000 or 100. These filters are made from inert, high-density polyethylene. All CHROM4 filters have been specifically formulated to provide the specified micron ratings. All formulations have been verified by porisometer testing.

Ordering Information - ChromFlo



Sinkers, Basket Shafts and Vessel Stands

Universal Vessel Stands For the safe transportation and storage of vessels

Due to their shape, dissolution vessels are difficult to hold securely. This can often result in scratched, chipped or even smashed vessels.The steel/acrylic stands are available in 6 or 8 vessel capacities and can hold vessels from any dissolution bath manufacturer.They can also be stacked together to save bench space and enable you to transport many vessels at a time.

Tubing

Basket Shaft/Paddle Holders Ideal for both basket shaft and paddle storage

Key Benefits:• Prevents shafts/paddles from becoming bent or scratched• Allows quick and easy transport of many shafts/paddles • Handy end plate to stop shafts/paddles sliding out when carrying• Holds all lengths and types of basket shafts and paddles• Non-corrosive, quality plastic construction • Space-saving, attractive design • Available in both 12 and 16 shaft capacities

Part No. DescriptionC4-PDLHLD-12 12 Piece Dissolution Paddle Holder


Part No. (each) DescriptionC4-UVS-6 Vessel Stand, 6 PositionC4-UVS-8 Vessel Stand, 8 Position


Part No. (ea) Description OEMDE

C4-PSTFEPFEP PTFE Tubing for HP 1/32” (0.8mm)IDx1/16”(1.6mm)OD,500’(152m)Roll

-

C4-PSTTYG TygonTubing,1/16”(1.6mm) x 1/8”(3.2mm)(15m) -

Distek

C4-DKPPTSA-6 Peristaltic Pump Tubing, Santoprene(Setof6) 5640-0337

C4-DKTAAT-123 Collar Tygon Auto Analyser Tubing,0.08”(2.06mm)ID(Setof12)

5041-2166

VanKel (Agilent/formerly Varian)

C4-VKPSTSA-8Peristaltic Pump Tubing, Silicone, CodedPurple&White(Setof8)

17-6010

C4-VKPSTTYColour Coded Sample PTFE Tubing, 0.42” (10.67mm)IDx0.066”(1.68mm)OD,8Lengthsof50’(15m)

17-6035

Sinkers CHROM4 offers the most extensive selection of tablet and capsule sinkers available from a single source. Their family of sinkers includes most configurations currently in use worldwide, including helical style, basket style, three-prong style and others.

Part No. (each) Description OEM Agilent (formerly VanKel/Varian) CompatibleC4-VKPCS 3 Prong Capsule Sinker, Plastic 12-3050C4-VKBSK-JP Japanese Pharmacopeia Basket Sinker 12-3070SotaxC4-SXSSCS-4 4 Spring Style Capsule Sinker, 316 SS 8280C4-SXSSCS-5 5 Spring Style Capsule Sinker, 316 SS 7346C4-SXSSCS-6 6 Spring Style Capsule Sinker, 316 SS 8283C4-SXSSCS-7 7 Spring Style Capsule Sinker, 316 SS 6881C4-SXSSCS-10 10 Spring Style Capsule Sinker, 316 SS 7349C4-SXORS O-Ring Sinker, 316 SS 8399

Ordering Information - Sinkers

C4-VKPCS

C4-VKBSK-JP

GC Columns

[email protected] :: www.chrom4.com [email protected] :: www.chrom4.com

* Maximum film thickness depends also on the stationary phase type.

AVAILABLE IN ANY PHASE YOU REQUIRE

Common Phases Polarity Quick View

non polar polar

CH-1

CH-1MS

CH-1HT

CH-5

CH-5MS

CH-5DF CH-17

CH-1701

CH-20

CH-225CH-35

CH-35MS

CH-624

CH-BAC2

CH-BIOHT

CH-FFAP

CH-PAH

CH-PONA

CH-STAR-WAX

CH-88

CH-BAC1

GC Columns Dimensions Available

FASTI.D. 0.10mm 0.15mm 0.18mm

Length from 2 to 15m from 2.5 to 30m from 5 to 60m

Film Thickness* from 0.05 to 1.00µm from 0.05 to 1.40µm from 0.05 to 1.50µm

CONVENTIONALI.D. 0.25mm 0.32mm

Length from 5 to 100m from 5 to 100m

Film Thickness* from 0.05 to 3.00µm from 0.05 to 5.00µm

WIDE BOREI.D. 0.45mm 0.53mm

Length from 10 to 75m from 10 to 75m

Film Thickness* up to 5.00µm up to 5.00µm

Chiral columns available in various phases. Please visit www.chrom4.com for information or contact your local distributor.

GC Columns


(mm) (m) (µm) Part No. Restek J&W No. iso/prog. (°C)

0.2515 0.10 CH1HT-152510 - 122-1111 -60to380

30 0.10 CH1HT-02510 - 122-1131 -60to380

0.3215 0.10 CH1HT-153210 - 123-1111 -60to380

30 0.10 CH1HT-303210 - 123-1131 -60to380

(mm) (m) (µm) Part No. Restek J&W No. iso/prog. (°C)

0.53

102.65 CH1-1053265 - 125-10HB -60to260 / 300

5.00 CH1-1053500 - 125-10H5 -60to280 / 300

15

0.15 CH1-155315 - 125-1011 -60to340/ 360

0.50 CH1-155350 18037 125-1017 -60to300 / 320

1.00 CH1-1553100 18052 125-101J -60to300 / 320

1.50 CH1-1553150 18067 125-1012 -60to300 / 320

3.00 CH1-1553300 10182 125-1014 -60to260 / 300

5.00 CH1-1553500 10177 125-1015 -60to280 / 300

25 5.00 CH1-2553500 - 125-1025 -60to280 / 300

30

0.50 CH1-305350 18040 125-1037 -60to300 / 320

1.00 CH1-3053100 18055 125-103J -60to300 / 320

1.50 CH1-3053150 18070 125-1032 -60to300 / 320

2.65 CH1-3053265 - 125-103B -60to260 / 300

3.00 CH1-3053300 10185 125-1034 -60to260 / 300

5.00 CH1-3053500 10179 125-1035 -60to280 / 300

60

1.00 CH1-6053100 18058 125-106J -60to300 / 320

1.50 CH1-6053150 18073 125-1062 -60to300 / 320

3.00 CH1-6053300 10188 125-1064 -60to260 / 300

5.00 CH1-6053500 10183 125-1065 -60to280 / 300

CH-1 (continued)

(mm) (m) (µm) Part No. Restek J&W iso/prog. (°C)

0.10

100.10 CH1-101010 41101 127-1012 -60to325 / 350

0.40 CH1-101040 41103 127-1013 -60to325 / 350

200.10 CH1-201010 41102 127-1022 -60to325 / 350

0.40 CH1-201040 41104 127-1023 -60to325 / 350

0.18

100.18 CH1-101818 40101 121-1012 -60to325 / 350

0.40 CH1-101840 40110 121-1013 -60to325 / 350

200.18 CH1-201818 40102 121-1022 -60to325 / 350

0.40 CH1-201840 40111 121-1023 -60to325 / 350

40 0.40 CH1-401840 40112 121-1043 -60to325 / 350

0.25

15

0.10 CH1-152510 10105 122-1011 -60to325 / 350

0.25 CH1-152525 10120 122-1012 -60to325 / 350

1.00 CH1-1525100 10150 122-1013 -60to325 / 350

25 0.25 CH1-252525 - 122-1022 -60to325 / 350

30

0.10 CH1-302510 10108 122-1031 -60to325 / 350

0.25 CH1-302525 10123 122-1032 -60to325 / 350

0.50 CH1-302550 10138 122-103E -60to325 / 350

1.00 CH1-3025100 10153 122-1033 -60to325 / 350

0.32

15

0.10 CH1-153210 10106 123-1011 -60to325 / 350

0.25 CH1-153225 10121 123-1012 -60to325 / 350

1.00 CH1-1532100 10151 123-1013 -60to325 / 350

3.00 CH1-1532300 10181 123-1014 -60to280 / 300

5.00 CH1-1532500 10176 123-1015 -60to280 / 300

25

0.25 CH1-253225 - 123-1022 -60to325 / 350

0.52 CH1-253252 - 123-1026 -60to325 / 350

1.05 CH1-2532105 - 123-102F -60to280 / 300

30

0.10 CH1-303210 10109 123-1031 -60to325 / 350

0.25 CH1-303225 10124 123-1032 -60to325 / 350

0.50 CH1-303250 10139 123-103E -60to325 / 350

1.00 CH1-3032100 10154 123-1033 -60to325 / 350

3.00 CH1-3032300 10184 123-1034 -60to280 / 300

5.00 CH1-3032500 10178 123-1035 -60to280 / 300

500.25 CH1-503225 123-1052 -60to325 / 350

0.52 CH1-503252 18010 123-1056 -60to325 / 350

1.05 CH1-5032105 123-105F -60to280 / 300

60

0.10 CH1-603210 10112 123-1061 -60to325 / 350

0.25 CH1-603225 10127 123-1062 -60to325 / 350

0.50 CH1-603250 10142 123-106E -60to325 / 350

1.00 CH1-6032100 10157 123-1063 -60to325 / 350

3.00 CH1-6032300 10187 123-1064 -60to280 / 300

5.00 CH1-6032500 10180 123-1065 -60to280 / 300

0.45 301.27 CH1-3045127 - 124-1032 -60to300/ 320

2.55 CH1-3045255 - 124-1034 -60to260 / 300

CH-1 • Equivalent to USP G1, G2, G9, G38100% methyl polysiloxane

ChromGC

CH-1


0.1010 0.40 CH1MS-101040 - 127-0113 -60to340 / 360

20 0.40 CH1MS-201040 - 127-0123 -60to340 / 360

0.1810 0.18 CH1MS-101818 - - -60to340 / 360

20 0.18 CH1MS-201818 - - -60to340 / 360

0.2012 0.33 CH1MS-122033 - 128-0122 -60to340 / 360

25 0.33 CH1MS-252033 - 128-0122 -60to340 / 360

0.25

15 0.25 CH1MS-152525 11620 122-0112 -60to340 / 360

300.10 CH1MS-302510 11608 122-0131 -60to340 / 360

0.25 CH1MS-302525 11623 122-0132 -60to340 / 360

60 0.25 CH1MS-602525 - 122-0162 -60to340 / 360

0.32

15 0.25 CH1MS-153225 11621 123-0112 -60to340 / 360

300.10 CH1MS-303210 11609 123-0131 -60to340 / 360

0.25 CH1MS-303225 11624 123-0132 -60to340 / 360

60 0.25 CH1MS-603225 - 123-0162 -60to340 / 360

CH-1MS • Equivalent to USP G2100% Dimethylpolysiloxane

ChromGC

CH-1MS

CH-1HT100% methyl polysiloxane for high temperature

ChromGC

CH-1HT

GC Columns


ChromGC

CH-5


0.25 600.15 CH5DF-602515 - 122-2461 350 / 360

0.25 CH5DF-602525 - 122-2462 350 / 360

CH-5DF (Dioxin Furan)5% silphenylen

ChromGC

CH-5DF


0.10

10

0.10 CH5-101010 41201 127-5012 -60to325 / 350

0.17 CH5-101017 127-501E -60to325 / 350

0.40 CH5-101040 41203 127-5013 -60to325 / 350

200.10 CH5-201010 41202 127-5022 -60to325 / 350

0.40 CH5-201040 41204 127-5023 -60to325 / 350

0.18

100.18 CH5-101818 - 121-5012 -60to325 / 350

0.40 CH5-101840 40210 121-5013 -60to325 / 350

200.18 CH5-201818 - 121-5022 -60to325 / 350

0.40 CH5-201840 40211 121-5023 -60to325 / 350

0.20

12 0.33 CH5-122033 - 128-5012 -60to325 / 350

15 0.20 CH5-152020 - 128-50H7 -60to325 / 350

25 0.33 CH5-252033 - 128-5022 -60to325 / 350

0.25

15

0.10 CH5-152510 10205 122-5011 -60to325 / 350

0.25 CH5-152525 10220 122-5012 -60to325 / 350

0.50 CH5-152550 12335 122-501E -60to325 / 350

1.00 CH5-1525100 10250 122-5013 -60to325 / 350

25 0.25 CH5-252525 - 122-5022 -60to325 / 350

30

0.10 CH5-302510 10208 122-5031 -60to325 / 350

0.25 CH5-302525 10223 122-5032 -60to325 / 350

0.50 CH5-302550 12338 122-503E -60to325 / 350

1.00 CH5-3025100 10253 122-5033 -60to325 / 350

50 0.25 CH5-502525 - 122-5052 -60to325 / 350

60

0.10 CH5-602510 10211 122-5061 -60to325 / 350

0.25 CH5-602525 10226 122-5062 -60to325 / 350

0.50 CH5-602550 10241 122-506E -60to325 / 350

1.00 CH5-6025100 10256 122-5063 -60to325 / 350

0.10 CH5-602510 10206 123-5011 -60to325 / 350

0.32

150.25 CH5-153225 10221 123-5012 -60to325 / 350

1.00 CH5-1532100 - 123-5013 -60to325 / 350

25 0.52 CH5-253252 - 123-5026 -60to325 / 350

30

0.10 CH5-303210 10209 123-5031 -60to325 / 350

0.25 CH5-303225 10224 123-5032 -60to325 / 350

0.50 CH5-303250 10239 123-503E -60to325 / 350

1.00 CH5-3032100 10254 123-5033 -60to325 / 350

50 1.00 CH5-5032100 - 123-5053 -60to325 / 350

600.25 CH5-603225 10227 123-5062 -60to325 / 350

1.00 CH5-6032100 10257 123-5063 -60to325 / 350

0.4515 1.27 CH5-1545127 - 124-5012 -60to300 / 320

30 1.27 CH5-3045127 - 124-5032 -60to300 / 320

0.53

10 2.65 CH5-1053265 - 125-50HB -60to300 / 320

15

0.25 CH5-155325 10222 125-501K -60to300 / 320

0.50 CH5-155350 10237 125-5017 -60to300 / 320

1.00 CH5-1553100 12352 125-501J -60to300 / 320

1.50 CH5-1553150 10267 125-5012 -60to300 / 320

30

0.25 CH5-305325 10225 125-503K -60to300 / 320

0.50 CH5-305350 10240 125-5037 -60to300 / 320

0.88 CH5-305388 - 125-503D -60to300 / 320

1.00 CH5-3053100 12355 125-503J -60to300 / 320

1.50 CH5-3053150 10270 125-5032 -60to300 / 320

3.00 CH5-3053300 10285 125-5034 -60to280 / 300

5.00 CH5-3053500 10279 125-5035 -60to280 / 300

601.50 CH5-6053150 10273 125-5062 -60to300 / 320

5.00 CH5-6053500 10283 125-5065 -60to260 / 280

CH-5 • Equivalent to USP G27, G36, G41(5%-Phenyl) - methylpolysiloxane


0.1820 0.18 CH5MS-201818 - 121-5522 -60to325 / 350

40 0.18 CH5MS-401818 - 121-5542 -60to325 / 350

0.20

12 0.33 CH5MS-122033 - 128-5512 -60to325 / 350

25 0.33 CH5MS-252033 - 128-5522 -60to325 / 350

50 0.33 CH5MS-502033 - 128-5552 -60to325 / 350

0.25

15

0.10 CH5MS-152510 12705 122-5511 -60to325 / 350

0.25 CH5MS-152525 12720 122-5512 -60to325 / 350

0.50 CH5MS-152550 12735 122-5516 -60to325 / 350

1.00 CH5MS-1525100 12750 122-5513 -60to325 / 350

25 0.25 CH5MS-252525 - 122-5522 -60to325 / 350

30

0.10 CH5MS-302510 12708 122-5531 -60to325 / 350

0.25 CH5MS-302525 12723 122-5532 -60to325 / 350

0.50 CH5MS-302550 12738 122-5536 -60to325 / 350

1.00 CH5MS-3025100 12753 122-5533 -60to325 / 350

50 0.25 CH5MS-502525 - 122-5552 -60to325 / 350

60

0.10 CH5MS-602510 - 122-5561 -60to325 / 350

0.25 CH5MS-602525 - 122-5562 -60to325 / 350

1.00 CH5MS-6025100 - 122-5563 -60to325 / 350

0.32

15

0.10 CH5MS-153210 12706 123-5511 -60to325 / 350

0.25 CH5MS-153225 12721 123-5512 -60to325 / 350

1.00 CH5MS-1532100 12751 123-5513 -60to325 / 350

25 0.52 CH5MS-253252 - 123-5526 -60to325 / 350

30

0.10 CH5MS-303210 - 123-5531 -60to325 / 350

0.25 CH5MS-303225 12724 123-5532 -60to325 / 350

0.50 CH5MS-303250 - 123-5536 -60to325 / 350

1.00 CH5MS-3032100 12754 123-5533 -60to325 / 350

60

0.10 CH5MS-603210 - 123-5561 -60to325 / 350

0.25 CH5MS-603225 - 123-5562 -60to325 / 350

1.00 CH5MS-6032100 - 123-5563 -60to325 / 350

0.53

15 1.50 CH5MS-1553150 12767 125-5512 -60to300 / 320

301.00 CH5MS-3053100 12755 125-553J -60to300 / 320

1.50 CH5MS-3053150 12770 125-5532 -60to300 / 320

CH-5MS • Equivalent to USP G27(5%-Phenyl) - methylpolysiloxane

ChromGC

CH-5MS

GC Columns



0.25 30 0.25 CH20-302525 - 112-2032 60to230 / 250

0.32 30 0.25 CH20-303225 - 113-2032 60to230 / 250

CH-CARBOWAX-20MPolyethylene Glycol • Equivalent to USP G14, G15, G16)

ChromGC

CH-CARBOWAX-20M


0.32 30 1.80 CHBAC1-3032180 - 123-9134 20to260 / 280

0.53 30 3.00 CHBAC1-3053300 - 125-9134 20to260 / 280

CH-BAC1Ethanol/Acetone

ChromGC

CH-BAC1


0.25 30 0.25 CH35-302525 - 122-1932 40to300 / 320

0.32 300.25 CH35-303225 - 123-1932 40to300 / 320

0.50 CH35-303250 - 123-1933 40to300 / 320

0.53 300.50 CH35-305350 - 125-1937 40to280 / 300

1.00 CH35-3053100 - 125-1932 40to300 / 320

CH-35 • Equivalent to USP G42(35%-Phenyl) - methylpolysiloxane

ChromGC

CH-35


0.25

15 0.25 CH35MS-152525 - 122-3812 50to340 / 360

30 0.25 CH35MS-302525 - 122-3832 50to340 / 360

60 0.25 CH35MS-602525 - 122-3862 50to340 / 360

0.32 30 0.25 CH35MS-303225 - 123-3832 50to340 / 360

0.53 300.50 CH35MS-305350 - 125-3837 50to320 / 340

1.00 CH35MS-3053100 - 125-3832 50to320 / 340

CH-35MS • Equivalent to USP G42(35%-Phenyl) - methylpolysiloxane

ChromGC

CH-35MS


0.20 50 0.50 CHPONA-502050 - 128-1056 -60to325 / 350

0.25 100 0.50 CHPONA-002550 10195 122-10A6 -60to325 / 350

CH-PONA100%- Dimethylpolysiloxane

ChromGC

CH-PONA


0.18 40 0.07 CHPAH-40187 49316 - 340 / 360

0.2530 0.10 CHPAH-302510 49318 - 340 / 360

60 0.10 CHPAH-602510 49317 - 340 / 360

CH-PAH8-10% phenyl

ChromGC

CH-PAH


0.3210 0.10 CHBIOHT-103210 10292 - 360 / 380

15 0.10 CHBIOHT-153210 10293 - 360 / 380

CH-BIO-HT5% phenyl

ChromGC

CH-BIO-HT


0.32 30 1.20 CHBAC2-3032120 - 123-9234 20to260 / 280

0.53 30 2.00 CHBAC2-3053200 - 125-9234 20to260 / 280

CH-BAC2Ethanol/Acetone

ChromGC

CH-BAC2

GC Columns



0.10 200.10 CH1701-201010 42202 127-0722 -20to280

0.40 CH1701-201040 - 127-0723 -20to280

0.18 10 0.40 CH1701-101840 - 121-0713 -20to280

0.25

150.25 CH1701-152525 - 122-0712 -20to280

1.00 CH1701-1525100 12050 122-0713 -20to280

30

0.15 CH1701-302515 - 122-0731 -20to280

0.25 CH1701-302525 12023-600

122-0732 -20to280

1.00 CH1701-3025100 12053 122-0733 -20to280

60

0.15 CH1701-602515 - 122-0761 -20to280

0.25 CH1701-602525 12026 122-0762 -20to280

1.00 CH1701-6025100 12056 122-0763 -20to280

0.32

150.25 CH1701-153225 12021 123-0712 -20to280

1.00 CH1701-1532100 12051 123-0713 -20to280

30

0.15 CH1701-303215 - 123-0731 -20to280

0.25 CH1701-303225 12024 123-0732 -20to280

1.00 CH1701-3032100 12054 123-0733 -20to280

50 1.00 CH1701-5032100 - 123-0753 -20to280

600.25 CH1701-603225 12027 123-0762 -20to280

1.00 CH1701-3032100 12057 123-0763 -20to280

0.53

15 1.00 CH1701-1553100 12052 125-0712 -20to280

300.50 CH1701-305350 12040 125-0737 -20to280

1.00 CH1701-3053100 12055 125-0732 -20to280

CH-1701 • Equivalent to USP G46(14%-Cyanopropyl-phenyl) - methylpolysiloxane

ChromGC

CH-1701


0.1010

0.10 CH17-101010 - 127-1712 40to280 / 300

0.20 CH17-201020 - 127-1713 40to280 / 300

20 0.10 CH17-201010 - 127-1722 40to280 / 300

0.18 200.18 CH17-201818 - 121-1722 40to280 / 300

0.30 CH17-201830 - 121-1723 40to280 / 300

0.25

15

0.15 CH17-152515 - 122-1711 40to280 / 300

0.25 CH17-152525 10520 122-1712 40to280 / 300

0.50 CH17-152550 10535 122-1713 40to280 / 300

30

0.15 CH17-302515 - 122-1731 40to280 / 300

0.25 CH17-302525 10523 122-1732 40to280 / 300

0.50 CH17-302550 10538 122-1733 40to280 / 300

60 0.25 CH17-602525 - 122-1762 40to280 / 300

0.32

15

0.15 CH17-153215 - 123-1711 40to280 / 300

0.25 CH17-153225 10521 123-1712 40to280 / 300

0.50 CH17-153250 10536 123-1713 40to280 / 300

30

0.15 CH17-303215 - 123-1731 40to280 / 300

0.25 CH17-303225 - 123-1732 40to280 / 300

0.50 CH17-303250 10539 123-1733 40to280 / 300

60 0.25 CH17-603225 - 123-1762 40to280 / 300

0.53

15 1.00 CH17-1553100 10552 125-1712 40to260 / 280

30 1.00 CH17-3053100 10555 125-1732 40to260 / 280

601.50 CH17-6053150 - 125-1733 40to260 / 280

1.00 CH17-6053100 10558 125-1762 40to260 / 280

CH-17 • Equivalent to USP G3, G17(50%-Phenyl) - methylpolysiloxane

ChromGC

CH-17


0.10 20 0.10 CH225-201010 - 127-2222 45to220 / 240

0.18 20 0.20 CH225-201820 - 121-2223 45to220 / 240

0.25

15 0.25 CH225-152525 - 122-2212 45to220 / 240

300.15 CH225-302515 - 122-2231 45to220 / 240

0.25 CH225-302525 - 122-2232 45to220 / 240

0.32 30 0.25 CH225-303232 - 123-2232 45to220 / 240

0.5315 1.00 CH225-1553100 - 125-2212 40to200 / 220

30 1.00 CH225-3053100 - 125-2232 40to200 / 220

CH-225 • Equivalent to USP G7, G19(50%-Cyanopropyl-phenyl) - methylpolysiloxane

ChromGC

CH-225


0.18 20 1.00 CH624-2018100 40924 121-1324 -20to260

0.2530 1.40 CH624-3025140 10968 122-1334 -20to260

60 1.40 CH624-6025140 10969 122-1364 -20to260

0.3230 1.80 CH624-3032180 10970 123-1334 -20to260

60 1.80 CH624-6032180 10972 123-1364 -20to260

0.4530 2.55 CH624-3045255 - 124-1334 -20to260

75 2.55 CH624-7545255 - 124-1374 -20to260

0.53

30 3.00 CH624-3053300 10971 125-1334 -20to260

60 3.00 CH624-6053300 10973 125-1364 -20to260

75 3.00 CH624-7553300 10974 125-1374 -20to260

CH-624 • Equivalent to USP G43(6% cyanopropyl-phenyl) - methylpolysiloxane

ChromGC

CH-624

For EPA Methods (Drinking & Waste Water),

please visit www.chrom4.com

[email protected] :: www.chrom4.com

GC Columns


CH-STAR-WAX • Equivalent to USP G14, G15, G16Polyethylene Glycol


0.10

100.10 CHSWAX-101010 - 127-7012 20to250 / 270

0.20 CHSWAX-101020 - 127-7013 20to250 / 270

200.10 CHSWAX-201010 - 127-7022 20to250 / 270

0.20 CHSWAX-201020 - 127-7023 20to250 / 270

0.18

10 0.18 CHSWAX-101818 - 121-7012 20to250 / 270

200.18 CHSWAX-201818 - 121-7022 20to250 / 270

0.30 CHSWAX-201830 - 121-7023 20to250 / 270

40 0.30 CHSWAX-401830 - 121-7043 20to250 / 270

0.25

150.25 CHSWAX-152525 - 122-7012 20to250 / 270

0.50 CHSWAX-152550 - 122-7013 20to250 / 270

30

0.15 CHSWAX-302515 - 122-7031 20to250 / 270

0.25 CHSWAX-302525 10673 122-7032 20to250 / 270

0.50 CHSWAX-302550 - 122-7033 20to250 / 270

60

0.15 CHSWAX-602515 - 122-7061 20to250 / 270

0.25 CHSWAX-602525 - 122-7062 20to250 / 270

0.50 CHSWAX-602550 - 122-7063 20to250 / 270

0.32

150.25 CHSWAX-153225 - 123-7012 20to250 / 270

0.50 CHSWAX-153250 - 123-7013 20to250 / 270

30

0.15 CHSWAX-303215 - 123-7031 20to250 / 270

0.25 CHSWAX-303225 10674 123-7032 20to250 / 270

0.50 CHSWAX-303250 - 123-7033 20to250 / 270

600.25 CHSWAX-603225 - 123-7062 20to250 / 270

0.50 CHSWAX-603250 - 123-7063 20to250 / 270

0.45

30 0.85 CHSWAX-304585 - 124-7032 20to250 / 270

150.50 CHSWAX-154550 - 125-7017 20to250 / 270

1.00 CHSWAX-1545100 - 125-7012 20to250 / 270

0.5330

0.25 CHSWAX-305325 - 125-7031 20to250 / 270

0.50 CHSWAX-305350 - 125-7037 20to250 / 270

1.00 CHSWAX-3053100 - 125-7032 20to250 / 270

60 1.00 CHSWAX-6053100 - 125-7062 20to250 / 270

ChromGC

CH-STAR-WAX


0.25

15 0.25 CHFFAP-152525 11020 122-3212 40to250

300.25 CHFFAP-302525 11023 122-3232 40to250

0.50 CHFFAP-302550 11038 122-3233 40to250

0.32

15 0.25 CHFFAP-153225 11021 123-3212 40to250

30

0.25 CHFFAP-303225 11024 123-3232 40to250

0.50 CHFFAP-303250 11039 123-3233 40to250

1.00 CHFFAP-3032100 11054 123-3234 40to250

50 0.50 CHFFAP-503250 - 123-3253 40to250

60

0.25 CHFFAP-603225 11027 123-3262 40to250

0.50 CHFFAP-603250 11042 123-3263 40to250

1.00 CHFFAP-6032100 11057 123-3264 40to250

0.45 30 0.85 CHFFAP-304585 - 124-3232 40to250

0.53

150.50 CHFFAP-155350 11037 125-3217 40to250

1.00 CHFFAP-1553100 11052 125-3212 40to250

30

0.25 CHFFAP-305325 11025 125-3231 40to250

0.50 CHFFAP-305350 11040 125-3237 40to250

1.00 CHFFAP-3053100 11055 125-3232 40to250

1.50 CHFFAP-3053150 - 125-3233 40to250

CH-FFAP • Equivalent to USP G25, G35, G39Nitroterephthalic Acid Modified Polyethylene Glycol

ChromGC

CH-FFAP


0.20 50 0.20 CH88-502020 - 60to250

0.25

50 0.20 CH88-502520 - 60to250

60 0.20 CH88-602520 - 60to250

100 0.20 CH88-1002520 13199 60to250

CH-88 • Equivalent to USP G5, G8, G48Biscyanopropyl polysiloxane

ChromGC

CH-88

GC Septa:: Lowest bleed of any septa:: Soft and resealable:: Molded for dimensional consistency giving more

injections per septum, thereby costing less

Precision molded GC Septa made from 100% Pure Premium Silcone Rubber. Our GC septum delivers the ultimate in low bleed properties and longevity. Our unique formulation and conditioning process is what separates our GC Septa from the rest.

Manufacturer Size Quantity PartNumber

OVSC 9.5mm 50 CH-237705

OVSC 11mm 50 CH-237715

Chrom4 11mm 50 CHR-HD-A1544

Chrom4 9.5mm 50 CHR-HD-A1486

Chrom4 10mm 50 CHR-HD-A1405

GC Accessories

[email protected] :: www.chrom4.com [email protected] :: www.chrom4.com [email protected] :: www.chrom4.com

GC Accessories

Description ID (mm) OD (mm) Length (mm) Glass Type Deactivated Agilent™ P/N Part Number

Deactivated Injection Port Liners

Tapered Liner - 1 End 4.0 6.45 78.5 Borosilicate Yes 5181-3316 IS-4209

Tapered Liner - 1 End w/wool*

4.0 6.45 78.5 Borosilicate Yes 5062-3587 IS-4210

Tapered Liner - Both Ends 4.0 6.45 78.5 Borosilicate Yes 5181-3315 IS-4211

Split/Splitless Liner w/wool* 4.0 6.3 78.5 Borosilicate Yes 19251-60540 IS-4212

Cup Split Liner+ 4.0 6.3 78.5 Borosilicate No 18740-80190 IS-4202

DIrect Liner 1.5 6.45 78.5 Borosilicate Yes 18740-80200 IS-4215

DIrect Connect Dual Taper, Bottom Hole 4.0 6.3 78.5 Borosilicate Yes G1544-80700 IS-4217

Split only, Tapered, Low Pressure Drop 4.0 6.3 78.5 Borosilicate Yes 5183-4647 IS-4220

GP Split, 1 Taper Liner w/wool 4.0 6.3 78.5 Borosilicate Yes 5183-4711 IS-4221

Inlet Liners

+ The Cup Split Liner (IS-4202) contain small amounts of packing (10% CH-1 on 80/100 Chromosorb-WHP) retained by silanized glasswool.* Containing deactivated quartz wool packing to ensure vaporization of your sample before reaching the column entrance. The liner is made of borosilicate glass.

Liners for other brands available. See www.chrom4.com for details.

:: Deactivated for maximum inertness:: Meets or exceeds original manufacturers’ specifications:: Use liners packed with fused silica wool for the Agilent™ 7673 Autosampler

GC Accessories


Agilent™ Compatible Accessories

Electron Multipliers

Instrument Analyzer Type Technique Part Number

5971, 5972, 5973, 5975, LC/MSD Quadrupole GC-MS DT-2300A

Ferrules (10 per pack)Ferrule

SizeTubing Size

Style 100% Graphite

Agilent™ Part Number

85% Polyimide 15% Graphite

Agilent™ Part Number

Agilent™ Ferrules

1/16” 0.4mm - OV-GF-04 500-2004 OV-MS-04 5062-3508

1/16” 0.4mm HP/Agilent Short OV-GF-04-HP 500-2114 OV-MS-04-HP 5181-3323

1/16” 0.5mm - OV-GF-05 - OV-MS-05 5062-3506


1/16” 0.8mm - OV-GF-08 500-2008 OV-MS-08 5062-3538


1/16” 1.00mm - OV-GF-10 500-2010 OV-MS-10 -

1/16” 1.0mm HP/Agilent Short OV-GF-10-HP 5080-8773 OV-MS-10HP -

1/16” 1.2mm - OV-GF-12 500-2012 OV-MS-12 -

1/16” 1/16” - OV-GF-01 0100-1326 OV-MS-01 -

1/8” 1/8” - OV-GF-02 0100-1325 OV-MS-02 -

1/4” 1/4” - OV-GF-03 0100-1324 OV-MS-03 -

1/8” 1/16” - OV-GF-68 0100-1336 OV-MS-68 -

1/4” 1/16” - OV-GF-64 0100-1335 OV-MS-64 -

1/4” 1/8” - OV-GF-81 0100-1334 OV-MS-81 -

1/16” 0.4mm 2-Hole OV-GF-14 - OV-MS-14 5062-3580

1/16” 0.5mm 2-Hole OV-GF-25 - OV-MS-15 5062-3581

1/16” 0.5mm No-Hole OV-GF-01-NH - OV-MS-01-NH 5181-3308

Ferrules (10 per pack) Ferrule

SizeTubing Size

60% Polyimide 40% Graphite

100% Polyimide

100% Teflon

Capillary Ferrules

1/16” 0.4mm OV-GH-04 OV-HF-04 OV-TF-04

1/16” 0.4mm OV-GH-04-HP OV-HF-04-HP -

1/16” 0.5mm OV-GH-05 OV-HF-05 OV-TF-05

1/16” 0.5mm OV-GH-05-HP OV-HF-05-HP -

1/16” 0.8mm OV-GH-08 OV-HF-08 OV-TF-08

1/16” 0.8mm OV-GH-08-HP OV-HF-08-HP -

1/16” 1.0mm OV-GH-10 OV-HF-10 OV-TF-10

1/16” 1.2mm OV-GH-12 OV-HF-12 OV-TF-12

Straight Ferrules

1/16” 1/16” OV-GH-01 OV-HF-01 OV-TF-01

1/8” 1/8” OV-GH-02 OV-HF-02 OV-TF-02

3/16” 3/16” - - OV-TF-316

1/4” 1/4” OV-GH-03 OV-HF-03 OV-TF-03

3/8” 3/8” - - OV-TF-138

1/2” 1/2” - - OV-TF-13

GC Accessories


GC Accessories

:: Inert:: Pretested:: Increased analytical column lifetime

Guard Columns - Retention Gaps

Guard columns consist of 5 meters of deactivated fused silica supplied with high temperature string. All guard columns are extremely inert and each is pretested.

Guard columns are useful in protecting your analytical column from harmful non-volatile contaminates that are commonly found in many environmental and industrial samples.

Attaching the guard column to the front of the analytical column using fused silica connectors, or zero dead volume union, will extend your column’s lifetime. The non-volatile contaminants are deposited onto the guard column.

Length I.D.mm

CatalogNumber

5 Meters 0.18 CH-6180-5

5 Meters 0.25 CH-6250-5

5 Meters 0.32 CH-6320-5

5 Meters 0.53 CH-6530-5

Manufacturer Size Quantity PartNumber

Perkin Elmer 11mm 50 CHR-HD-P1544

Shimadzu Plug 50 CHR-HD-S1544

GC Septa

:: Easy to handle:: A simple pressure to assure a perfect seal:: Easy to install

Press-Fit Connectors

ChromGC Press-Fit connectors allow you to simply connect, with a tight seal, different columns or Retention Gaps together in many ways. Our Press-Fit connectors are custom-made to fit any tubing size and to ensure the minimal dead volume.

Press-Fit Union linear connectors, ideal to connect two columns or a Retention Gap to the analytical column.

Press-Fit “Y” three way connectors, ideal to connect two analytical columns to a single injector port or split the exit of one column to a dual detector GC system. Many other configurations are possible using ChromGC “Y” Press-Fit.

ChromGC also produces personalized Multiways Press-Fit connectors for advanced analytical system configurations as MDGC and other custom settings.

Inlet Gold Seals

Instrument Description Pack Size

Part Number

For Agilent 7890/6890/6850

0.8mm Inlet Seal, Gold-plated Splitless, Gold-plated Washers 2 OV-4300

0.8mm Inlet Seal, Gold-plated, Splitless, Gold-plated Washers 10 OV-4300-10

0.8mm Inlet Seal, Gold-plated, Split Double Groove (Cross), Gold-plated Washers 2 OV-4400

0.8mm Inlet Seal, Gold-plated, Split Double Groove (Cross), Gold-plated Washers 10 OV-4400-10

Replacement Gold-plated Washers for Inlet Seal 12 OV-4800

GC Columns


XTRM (Extreme) Columns

What is an XTRM (Extreme) column?XTRM columns are wall coated open tubular (WCOT) columns consisting of stainless steel tubing that has a special internal surface treatment. This special surface treatment makes the surface similar to deactivated fused silica. The unique surface treatment process permits us to offer XTRM columns in a wide range of internal diameters and phases. Because the special surface treatment permeates the stainless steel surface, rather than the conventional coating, the layer is particularly easy to bend, so the tubing can be coiled to very small diameters.

Compare XTRM columns and fused silica columns:• Metal columns can be coiled under 4.5 inches without breaking, ideal for small instruments.• Metal tubing allows XTRM columns to be used to higher temperatures (430°C) than fused silica columns

(standard rating is 380°C). • Coating efficiency (plates/meter) of XTRM columns is comparable to that of fused silica.• Dormancy of XTRM columns and fused silica columns is comparable, due to the unique properties

of the special surface treatment in XTRM columns.• XTRM columns will not break under stress.

• CH-1-XTRM• CH-5-XTRM• CH-SE54-XTRM• CH-17-XTRM

• CH-35-XTRM• CH-SE52-XTRM• CH-624-XTRM• CH-SimDis-XTRM

For dimensions and information of the phases listed above, please visit www.chrom4.com or ask your local distributor.

XTRM column phases available from Chrom4:

GC Columns


ApplicationsCompound Column

Acetal - Ethyl Acetate CH-STAR-WAX

Acetic Acid monitoring CH-FFAP (inquire)

Alcohol Ethoxylates CH-5HT

Alkyl Naphthalens CH-5

Anaesthetics Basic Drugs CH-5

Aroclor 1254 - 1260 PCBs Quick Screening CH-5

Basic Drugs Underivatized CH-5

Benzene aromatic volatile compounds in air CH-STAR-WAX

Benzyl Alcohol impurities CH-FFAP (inquire)

Bergamot Oil FAST-GC CH-1701

Bergamot Oil FAST-GC CH-WAX (inquire)

Biodiesel - EN 14105 - ASTM D6584 CH-BIO

Biodiesel FAMEs CH-BIO

Biodiesel Glycerin - Triglycerides CH-BIO

Blood Alcohol (Headspace) CH-BAC1 & CH-BAC2

Blood Alcohols - HS CH-BAC1 & CH-BAC2

Blood Alcohols - HS dual column CH-BAC1 & CH-BAC2

BTEX FAST-GC CH-624

Butter Triglycerides CH-1

Chamomile Essential Oil FAST-GC CH-STAR-WAX (inquire)

Chamomile Essential Oil FAST-GC Comparison CH-1701

Chlorinated Hydrocarbons CH-5 - EPA Method 612

Critical Flavor & Fragrances Compounds CH-FFAP

Cyclic Hydrocarbons CH-1

Determination of mineral oil hydrocarbons in vegetable oils

CH-1HT

Diethylene Glycol and Diols CH-FFAP

Dimethylanilines CH-STAR-WAX

Dioxins and Furans GC-MS CH-5MS

Drugs and Adulterants CH-5 (inquire by GC-MS)

Drugs of Abuse - Basic Drugs CH-1

Drugs of Abuse - Cannabinoids CH-1

Drugs Precursors CH-5

FAMEs (Fatty Acid Methyl Esters) C4 - C18 CH-STAR-WAX

FAMEs (Fatty Acid Methyl Esters) C6 - C24 CH-STAR-WAX

FAMEs (Fatty Acid Methyl Esters) Standard Mixture

CH-88

FAMEs (Fatty Acid Methyl Esters) Standard Mixture FAST-GC

CH-88 (inquire)

FAMEs and CLA isomers CH-88

FAMEs cis trans Isomers CH-88

Flavor & Fragrances Compounds CH-FFAP

Food Packaging Residual Solvents CH-1701

Fragrance Allergens FAST-GC CH-1701 (inquire)

Fragrance Allergens FAST-GC CH-STAR-WAX (inquire)

Free Acids CH-FFAP

Free Fatty Acids in Whisky CH-FFAP

Compound Column

Haloethers CH-5 - EPA Method 611-8110

Halogenated Volatiles CH-624 - EPA Method 551

Ketones CH-1

Natural Gas Hydrocarbons CH-1

Nitrogen-Phosphorus Pesticides Herbicides (Triazines)

CH-STAR-WAX EPA Method 619

Nitrosamines CH-5 - EPA Method 607

Nitrosamines CH-STAR-WAX

Olive Oil FAMEs (Fatty Acid Methyl Esters) Cis-Trans Isomers -

CH-88

Organic Acids CH-FFAP

Organochlorine Pesticides CH-5 - EPA Method 608-8081

Organophosphorus Pesticides CH-1 and CH-1701

PAH Polycyclic Aromatic Hydrocarbons CH-PAH - EPA Method 610-8100

PAHs CH-5MS - EPA 610 - 8100 - 8270

PAHs CH-PAH (inquire) EPA Methods 610 - 8100 - 8270

PAHs CH-PAH (inquire)

PAHs EPA 8270 - Helium Carrier Gas CH-PAH

PAHs FAST-GC CH-PAH (inquire)

Pesticides FAST-GC CH-1701 (inquire)

Phenols CH-1

Phenols CH-5 - EPA Method 604

Phthalate Esters CH-1 - EPA Method 606

Purgeable Aromatics CH-STAR-WAX EPA Method 602

Residual Solvents UPS 467 CH-624

Serum Volatiles Control CH-BAC1

Solvents CH-WAX

Sulfur compounds in coffee aroma CH-FFAP

USP 467 Residual Solvents (OVIs) FAST-GC Headspace

CH-624 (inquire) (G43 Phase)

VOCs in Drinking Water CH-624 - EPA Method 524-3

Vodka CH-STAR-WAX

Volatile Acidic Compounds CH-FFAP

Volatile Free Acids CH-FFAP

Whisky direct split injection CH-624

Xylene Isomers CH-FFAP


FUTURE DEVELOPMENTS:

Electron Mult ip l iers

(U) HP LC-MS Columns:

ISOSCELESP E L L I C U L A R C O R E

uattro

DT-2300A(Agi lent GC-MS)

Biol ink: Durable U(H)PLC Fit t ings

Bulk Si l ica

Sample Transfer

DataM8Riks Ritter Robot ic Tips


CHROM4 GmbH, Haupstrasse 365, Suhl-Wichtshausen, Thüringen, Germany, D-98530HRB, Registergericht Jena, [email protected]

Introduction - Obrnuta faza

Documents