European Style Press Brake Toolingtfico.com/catalogue/press-brake.pdfPress Brake Tooling TFI Bending & Die Brochure.indd 1 1/16/2008 1:23:25 PM Table of Content TFI Bending & Die Brochure.indd
Post on 29-Aug-2021
2 Views
Preview:
Transcript
TFI Co. is a manufacturer of industrial blades with 40 years experiencesteel quality, advanced machining, heat treatment technology and
Take experience to choose the right material with proper tempering for exact hardness needed in each machine knife.
The right choice of material combined with excellentheat treatment and precisemachining turn TFI productsinto high precision tools,which ensures high
System by TÜV Rheinland Group in
accordance with
ISO 9001 standards
Cutting edge provider
Cert No.: 01 100 012526
European StylePress Brake Tooling
TFI Bending & Die Brochure.indd 1 1/16/2008 1:23:25 PM
Table of Content
TFI Bending & Die Brochure.indd 1 1/16/2008 1:23:25 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 1
Standard Punch Lengths
Standard Die Lengths
F EATURES :
1. Most tools can be easilyloaded by a single operator.
2. Easy to store.
3. All sectionalized tools come pre-cut in nine different pieces.
4. Most sectionalized punches include two ear pieces (horns).
5. Special Tooling available.Please contact the sales desk.
SECTION WIDTHS:100mm LEFT EAR / 100mm RIGHT EAR / 10mm / 15mm / 20mm / 40mm / 50mm /200mm / 300mm
SECTION WIDTHS:100mm / 100mm / 10mm / 15mm / 20mm / 40mm / 50mm / 200mm / 300m m
Note: Special lengths are available at additional cost.
Note: Special lengths are available at additional cost.
(S )
(L)
(X)
415mm
835mm
835mm
(S )
(L)
(X)
415mm
835mm
835mm
F EATURES :
1. Most tools can be easilyloaded by a single operator.
2. Easy to store.
3. All sectionalized tools come pre-cut in nine different pieces.
4. Special Tooling available.Please contact the sales desk.
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 2:53:25 AM
TFI Bending & Die Brochure.indd 1 1/16/2008 1:23:25 PM
LARGE RADIUS PUNCHESPAGE
LARGE 1V DIESPAGE
1300
LARGE RADIUS PUNCHESPAGE
URETHANE PADSPAGE
URETHANE HOLDERSPAGE
1500
STANDARD PUNCHESPAGE
QUICK CHANGE 2V DIESPAGE
2V DIE HOLDERSPAGE
DIE RAILPAGE
100
GOOSENECK PUNCHESWITH THIN TIPPAGE
QUICK CHANGE 2V DIESPAGE
2V DIE HOLDERSPAGE
DIE RAILPAGE
400
DEEP GOOSENECK PUNCHESPAGE
2V DIESPAGE
2V DIE HOLDERSPAGE
300
NARROW 1V DIEHOLDERSPAGE
NARROW 1V DIESPAGE
SASH PUNCHESPAGE
600
LARGE 1V DIESPAGE
LARGE RADIUS PUNCHESPAGE
1200
QUICK CHANGE 2V DIESPAGE
2V DIE HOLDERSPAGE
DIE RAILPAGE
NARROW PUNCHESPAGE
500
STANDARD PUNCHESWITH THIN TIPPAGE
QUICK CHANGE 2V DIESPAGE
2V DIE HOLDERSPAGE
DIE RAILPAGE
200
STANDARD PUNCHESSTANDARD PUNCHESWITH THIN TIP
NARROW PUNCHES
QUICK CHANGE 2V DIES QUICK CHANGE 2V DIES
QUICK CHANGE 2V DIES
QUICK CHANGE 2V DIES
2V DIE HOLDERS
2V DIE RAIL
2V DIE HOLDERS
2V DIE RAIL
2V DIE HOLDERS
2V DIE RAIL
LARGE RADIUS PUNCHES LARGE RADIUS PUNCHES LARGE RADIUS PUNCHES
LARGE 1V DIES
LARGE 1V DIES
URETHANE PADS
2V DIE HOLDERS
2V DIE RAIL
SASH PUNCHES
GOOSENECK PUNCHESWITH THIN TIP
QUICK CHANGE1V DIES
QUICKCHANGE 1V DIE HOLDERS
URETHANE HOLDERS
2V DIES
GOOSENECK PUNCHES
2V DIE HOLDERS
90 DEGREE BENDING(0.4 - 3.4mm)
90 DEGREE BENDING WITHTHIN TIP GOOSENECK PUNCH
90 DEGREE BENDING WITH GOOSENECK PUNCH
90 DEGREE BENDING(SASH)
LARGE RADIUS BENDING(WITH URETHANE DIE)
LARGERADIUS BENDING
90 DEGREE BENDINGWITH NARROW PUNCH
90 DEGREE BENDINGWITH THIN TIP PUNCH
90 DEGREE BENDING(9.5 - 12.7mm)
2
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 2:55:11 AM
TFI Bending & Die Brochure.indd 2 1/16/2008 1:23:25 PM
3V HEMMING DIESPAGE
FLATTENING PUNCHESPAGE
1000
FLATTENING PUNCHESPAGE
FLATTENING DIESPAGE
1100
OFFSET TOOLSPAGE
2V DIE HOLDERSPAGE
DIE RAILPAGE
1800HEMMING(0.4 - 1.5mm)
HEMMING(0.4 - 3.0mm)
OFFSET BENDING(0.4 - 1.5mm)
FLATTENING PUNCHES
FLATTENING PUNCHES RAIL STYLEOFFSET TOOLS
2V DIE HOLDERS
2V DIE RAIL
FLATTENING DIES
3V HEMMING DIES
3
ACUTE ANGLE PUNCHESPAGE
ACUTE ANGLE LARGE1V DIESPAGE
1400
ACUTE ANGLE PUNCHESPAGE
ACUTE ANGLE QUICKCHANGE 2V DIESPAGE
2V DIE RAILSPAGE
2V DIE HOLDERSPAGE
700
STANDARD PUNCH HOLDER(SUPPLIED WITH MACHINE)OR NARROW PUNCH HOLDERSPAGE
STACKING PUNCH HOLDEROR NARROW PUNCH HOLDERSPAGE
STANDARD PUNCHESPAGE
LOW PROFILE NARROW1V DIESPAGE
NARROW 1V DIE HOLDERSPAGE
1900
DEEP PUNCH HOLDERPAGE
STANDARD PUNCHESPAGE
1600
ACUTE ANGLE PUNCHESPAGE
LARGE 1V DIESPAGE
900
ACUTE ANGLE PUNCHESPAGE
HEMMING DIES
STEP 1
PAGE
STEP 2
800
ACUTE-ANGLE BENDING(2.7 - 4.9mm)
ACUTE-ANGLE BENDING(0.4 - 1.9mm)
DEEP BOX BENDING DEEP PUNCH HOLDER
90 DEGREE BENDING(3.8 - 9.5mm)
HEMMING (2 STAGE)(0.4 - 1.9mm)
ACUTE ANGLE PUNCHESACUTE ANGLEPUNCHES
ACUTE ANGLEPUNCHES PAGE
STEP 1
STEP 2
HEMMING DIES
LARGE 1V DIES
DEEP PUNCH HOLDERSTANDARD PUNCH HOLDER(SUPPLIED WITH MACHINE)OR NARROW PUNCH HOLDERS
STACKING PUNCH HOLDERPAGE 66 AND NARROW
PUNCH HOLDERS
STANDARD PUNCHES
LOW PROFILE QUICK CHANGE
QUICK CHANGE 1VDIE HOLDERS
STANDARD PUNCHES
ACUTE ANGLE LARGE 1V DIES
ACUTE ANGLE PUNCHES
ACUTE ANGLE QUICKCHANGE 2V DIE
2V DIE RAIL
2V DIE HOLDERS
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 2:59:51 AM
TFI Bending & Die Brochure.indd 3 1/16/2008 1:23:26 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 4
CATALOGUENUMBER
Rmm
L835mm“H”
S415mm
XSECTIONALIZED
E40102E40108E40115E40123E40130
0.20.81.52.33.0
66.966.766.466.065.7
MAX. TONper metre
(L & S)100100100100100
MAX. TONper metre
(X)4747474747
"H"
R
90
9mm
0
30mm
35mm
35mm
R 5mm
10mm
(Ear Piece)
R
88 0
30mm
"H"
9mm
R 5mm
10mm
35mm
35mm
(Ear Pirce)
Cat. No. E40102, E40108, E40115, E40123, E40130
Cat. No. E40002, E40006, E40008, E40015, E40023, 4E0030Standard 88˚ Punches
Standard 90˚ Punches
(Ear Piece)
(Ear Piece)
L835mm
S415mm
XSECTIONALIZED
CATALOGUENUMBER
Rmm
MAX. TONper metre
(L & S) “H”0.20.60.81.52.33.0
100100100100100100
66.966.466.666.366.065.7
MAX. TONper metre
(X)
474747474747
E40002E40006E40008E40015E40023E40030
Part No. E40002
Part No. E40102
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:00:29 AM
TFI Bending & Die Brochure.indd 4 1/16/2008 1:23:26 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 5
CATALOGUENUMBER
Rmm
L835mm
S415mm
XSECTIONALIZED
MAX. TONper metre
(L & S) “H”66.9
MAX. TONper metre
(X)0.2 20 10
CATALOGUENUMBER
Rmm
L835mm
S415mm
XSECTIONALIZED
E40202E40206
MAX. TONper metre
(L & S)
MAX. TONper metre
(X)
0.20.6
“H”66.966.4
2020
1010
10mm5mm
R 5mm
10mm
(Ear Piece)
"H"
R
90
4mm
0
30mm
10mm5mm
R 5mm
10mm
(Ear Piece)
Cat. No. E40202 and E40206
Standard 90˚ Punches With Thin Tip
(Ear Piece)
Cat. No. E40212Standard 88˚ Punches With Thin Tip
"H"
R
88
4.02mm
0
30mm
Part No. E40212
Part No. E40202
E40212
TFI Bending & Die Brochure.indd 5 1/16/2008 1:23:26 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 6
"H"
9mm
R
880
30mm
35mm
35mm
R 5mm
(Ear Piece)10mm
Part No. E40402
(Ear Piece)
9mm
88 0
R
"H"
30mm
10mm
R 5mm
35mm
35mm
(Ear Piece)
Cat. No. E40302 - E40630
88˚ Gooseneck Punches
Part No. E40302
(Ear Piece)
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:02:18 AM
TFI Bending & Die Brochure.indd 6 1/16/2008 1:23:27 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 7
Cat. No. E40302 - E4063088˚ Gooseneck Punches
CATALOGUENUMBER
Rmm
MAX. TONper metre
(L & S)L
835mm“H”S
415mmX
SECTIONALIZED
E40302E40306E40308E40402E40406E40408E40415E40430E40602E40606E40608E40615E40630
0.20.60.80.20.60.81.53.00.20.60.81.53.0
50505050505050507070707070
MAX. TONper metre
(X)
50505047474747474747474747
"H"
88˚
R
30mm
9mm
10mm
R 5mm
35mm
35mm
Part No. E40602
(Ear Piece)
119.9119.4119.7104.9104.4104.6104.3103.789.989.489.689.388.7
TFI Bending & Die Brochure.indd 7 1/16/2008 1:23:27 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 8
CATALOGUENUMBER
Rmm
L835mm
S415mm
XSECTIONALIZED
E40712E40718
0.20.8
5050
MAX. TONper metre
(L & S)
MAX. TONper metre
(X)
3030
“H”89.989.7
"H"
R
6mm90 0
30mm
25mm
10mm
(Ear Pirce)
R 10mm
30mm
(Ear Piece)
CATALOGUENUMBER
Rmm
L835mm“H”
S415mm
XSECTIONALIZED
0.20.60.8
505050
Cat. No. E40712 and E40718 90˚ Gooseneck Punches With Thin Tip
"H"
88˚
R
30mm
6mm
30mm
R 10mm
10mm
25mm
MAX. TONper metre
(L & S)
MAX. TONper metre
(X)
303030
89.989.489.6
(Ear Piece)
Cat. No. E40702, E40706, E4070888˚ Gooseneck Punches With Thin Tip
E40702E40706E40708
Part No. E40702
Part No. E40712
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:03:14 AM
TFI Bending & Die Brochure.indd 8 1/16/2008 1:23:27 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 9
CATALOGUENUMBER
Rmm
L835mm
S415mm
XSECTIONALIZED
E44540E44560
4.86.4
100100
MAX. TONper metre
(L & S)
MAX. TONper metre
(X)
4747
“H”
105.0104.3
CATALOGUENUMBER
Rmm
L835mm
S415mm
XSECTIONALIZED
E40502 0.2 50
Cat. No. E40502 90˚ Gooseneck Punches
"H"
90˚
R
30mm
9mm
R 5mm
35mm
35mm
10mm
MAX. TONper metre
(L & S)
MAX. TONper metre
(X)
47
Cat. No. E44540 and E4456085˚ Gooseneck Punches
(Ear Piece)
“H”
104.9
"H"
R
85˚
30mm
15mm
R 5mm
EAR PIECE10mm
35mm
35mm
(Ear Piece)
Part No. E40402
Part No. E40502
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:03:44 AM
TFI Bending & Die Brochure.indd 9 1/16/2008 1:23:27 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 10
CATALOGUENUMBER
Rmm
MAX. TONper metre
(X)L
835mmS
415mmX
SECTIONALIZED
E40802E40806
0.20.6
5050
5050
“H”
95.094.5
MAX. TONper metre
(L & S)
CATALOGUENUMBER
Rmm
L835mm
S415mm
XSECTIONALIZED
E40902 0.2 50
Cat. No. E40802 and E4080688˚ Narrow Punches
90˚ Narrow Punches
"H"
6mm
R
88˚
30mm
70mm
"H"
R
90˚
30mm
6mm
70mm
Cat. No. E40902
“H”
95.0
MAX. TONper metre
Part No. E40802
Part No. E40902
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:04:11 AM
TFI Bending & Die Brochure.indd 10 1/16/2008 1:23:28 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 11
CATALOGUENUMBER
Rmm
L835mm
S415mm
XSECTIONALIZED
E41002E41006 E41102E41106
0.20.60.20.6
30303030
Cat. No. E41002, E41006, E41102, E4110688˚ Sash Punches
"H"
R
88˚
30mm
10mm
8mm
25mm
R 10mm
10mm 20mm
10mm
R 10mm
25mm
20mm
"H"
R
88˚
30mm
10mm
8mm
MAX. TONper metre
(L & S)
MAX. TONper metre
(X)
30303030
(Ear Piece)
(Ear Piece)
Part No. E41102
“H”99.999.469.969.4
Part No. E41002
TFI Bending & Die Brochure.indd 11 1/16/2008 1:23:28 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 12
"H" 20mm
R 8mm
12mm
20mm
300
R18mm(Ear Piece)
30mm
Cat. No. E41908 30˚ Acute-Angle Punches
(Ear Piece)
"H"
R
90˚
30mm
10mm
8mm
10mm
R 10mm
25mm
20mm
Rmm
L835mm
S415mm
XSECTIONALIZED
0.2 30
Cat. No. E4120290˚ Sash Punches
E41202
CATALOGUENUMBER
MAX. TONper metre
(L & S)
MAX. TONper metre
(X)
30
(Ear Piece)
“H”
69.9
Rmm
L835mm
S415mm
XSECTIONALIZED
0.8 100E41908
CATALOGUENUMBER
MAX. TONper metre
(L & S)
MAX. TONper metre
(X)
20
“H”
104.0
Part No. E40902
Part No. E41908
TFI Bending & Die Brochure.indd 12 1/16/2008 1:23:28 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 13
30˚
"H"
R
30mm
Cat. No. E41315 and E4133030˚ Acute-Angle Punches
CATALOGUENUMBER
Rmm
L835mm“H”
S415mm
XSECTIONALIZED
E41315E41330
1.53.0
100100
MAX. TONper metre
(L & S)
MAX. TONper metre
(X)100100
102.097.7
"H"
18.24mm
R
30 0
30mm
Cat. No. E42610 30˚ Acute-Angle Punches
Rmm
L835mm
S415mm
XSECTIONALIZED
0.8 100E42610
CATALOGUENUMBER
MAX. TONper metre
(L & S)
MAX. TONper metre
(X)
100
“H”
65.5
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:19:19 AM
TFI Bending & Die Brochure.indd 13 1/16/2008 1:23:28 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 14
Cat. No. E41440 and E4146060˚ Acute-Angle Punches
60˚
"H"
R
30mm
CATALOGUENUMBER
Rmm
L835mm
S415mm
XSECTIONALIZED
E41440E41460
4.86.0
100100
MAX. TONper metre
(L & S) “H”
66.265.0
Part No. E41440
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:19:57 AM
TFI Bending & Die Brochure.indd 14 1/16/2008 1:23:28 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 15
Part No. E44000
Cat. No. E44000 - E4403075° Punches
R 5mm
35mm
35mm
10mm
"H"
9.6mm
R
75°
30mm
(Ear Piece)
35mm
10mm
35mm
R 5mm
R
75°
"H"
10mm
30mm
(Ear Piece)
L835mm
S415mm
XSECTIONALIZED
CATALOGUENUMBER
Rmm
MAX. TONper metre
(L & S)
MAX. TONper metre
(X) “H”0.81.53.00.81.53.0
100100100505050
474747505050
67.667.266.2
120.0119.5118.6
E44000E44001E44003E44030E44031E44033
Part No. E44030
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:20:31 AM
TFI Bending & Die Brochure.indd 15 1/16/2008 1:23:29 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 16
Cat. No. E44020 - E4404075° Punches
R
75°
"H"
4.8mm
30mm
75˚
10mm
"H"
R
30mm
Part No. E44010 Part No. E44040
Part No. E44020
R
75°
"H"
10mm
30mm
35mm
10mm
35mm
R 5mm
(Ear Piece)
Call for pricing and lead time.
L835mm
S415mm
XSECTIONALIZED
CATALOGUENUMBER
Rmm
MAX. TONper metre
(L & S)
MAX. TONper metre
(X) “H”0.8 1.5 3.00.81.53.00.8
70707050 505050
47474750505047
90.089.588.695.094.593.6
160.0
E44020E44021E44023E44010E44011E44013
*E44040
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:21:09 AM
TFI Bending & Die Brochure.indd 16 1/16/2008 1:23:29 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 17
Cat. No. E41709 - E41719Large Radius Punches
"H"
30mm
R 9.5 mm
"H"
30mm
R 12.7 mm
"H"
30mm
15.9mm
"H"
30mm
R 19mm
Part No. E41709 Part No. E41712
Part No. E41715 Part No. E41719
CATALOGUENUMBER
MAX. TONper metre
L835mm
S415mm
XSECTIONALIZED
E41709E41712E41715E41719
100100100100
“H”83.089.087.091.0
TFI Bending & Die Brochure.indd 17 1/16/2008 1:23:29 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 18
Standard Punch Lengths
Standard Die Lengths
F EATURES :
1. Most tools can be easilyloaded by a single operator.
2. Easy to store.
3. All sectionalized tools come pre-cut in nine different pieces.
4. Most sectionalized punches include two ear pieces (horns).
5. Special Tooling available.Please contact the sales desk.
SECTION WIDTHS:100mm LEFT EAR / 100mm RIGHT EAR / 10mm / 15mm / 20mm / 40mm / 50mm /200mm / 300mm
SECTION WIDTHS:100mm / 100mm / 10mm / 15mm / 20mm / 40mm / 50mm / 200mm / 300m m
Note: Special lengths are available at additional cost.
Note: Special lengths are available at additional cost.
(S )
(L)
(X)
415mm
835mm
835mm
(S )
(L)
(X)
415mm
835mm
835mm
F EATURES :
1. Most tools can be easilyloaded by a single operator.
2. Easy to store.
3. All sectionalized tools come pre-cut in nine different pieces.
4. Special Tooling available.Please contact the sales desk.
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 2:53:25 AM
TFI Bending & Die Brochure.indd 18 1/16/2008 1:23:30 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 19
CATALOGUENUMBER
MAX. TONper metre
L835mm
S415mm
E41523E41630
100100
Cat. No. E41523 and E41630Flattening Punches
"H"
30mm
40mm
23mm
"H"
30mm
14mm
12mm30mm
Part No. E41523
Part No. E41630
“H”
65.084.0
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:22:09 AM
TFI Bending & Die Brochure.indd 19 1/16/2008 1:23:30 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 20
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
170
170
190
180
180
200
210
220
L
W
W
L
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
CATALOGUE NO. E40002, E40008, E40015, E40023, E40030,E40102, E40108, E40115, E40123, E40130
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:23:27 AM
TFI Bending & Die Brochure.indd 20 1/16/2008 1:23:30 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 21
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
170
170
190
180
180
200
210
220
L
W
W
L
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
CATALOGUE NO. E40202, E40212
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:48:54 AM
TFI Bending & Die Brochure.indd 21 1/16/2008 1:23:30 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 22
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
170
170
190
180
180
200
210
220
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
L
W
W
L
CATALOGUE NO. E40302, E40308
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:49:40 AM
TFI Bending & Die Brochure.indd 22 1/16/2008 1:23:31 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 23
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
170
170
190
180
180
200
210
220
W
W
L
L
W
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
CATALOGUE NO. E40402, E40408, E40415, E40430, E40502
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:50:22 AM
TFI Bending & Die Brochure.indd 23 1/16/2008 1:23:31 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 24
10
10
20
20
30
30
40
4044
50
50
60
60
70
7077
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
17077
17077
190
180
180
200
210
220
L
(SOLID LINES)
CATALOGUE(DASHED LINES)
Bend Limit GraphCATALOGUE NO. E40602, E40608, E40615, E40630
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:51:23 AM
TFI Bending & Die Brochure.indd 24 1/16/2008 1:23:32 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 25
10
10
20
2
30
30
40
4044
50
5
60
60
70
7077
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
17077
17077
190
180
180
200
210
220
L
CAT(SOLID LINES)
CAT(DASHED LINES)
CATALOGUE NO. E40702, E40708, E40712, E40718
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:52:05 AM
TFI Bending & Die Brochure.indd 25 1/16/2008 1:23:33 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 26
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
170
170
190
180
180
200
210
220
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
W
L
W
L
CATALOGUE NO. E44540, E44560
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:52:33 AM
TFI Bending & Die Brochure.indd 26 1/16/2008 1:23:34 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 27
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
17077
17077
190
180
180
200
210
220
CAT(SOLID LINES)
CATALOGUE(DASHED LINES)
CATALOGUE NO. E40802, E40902
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:53:24 AM
TFI Bending & Die Brochure.indd 27 1/16/2008 1:23:35 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 28
10
10
20
20
30
30
40
4044
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
17077
17077
190
180
180
200
210
220
CAT(SOLID LINES)
CAT(DASHED LINES)
CATALOGUE NO. E41002
Bend Limit Graph
30
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:54:01 AM
TFI Bending & Die Brochure.indd 28 1/16/2008 1:23:36 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 29
10
10
20
2
30
30
40
4044
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
17077
17077
190
180
180
200
210
220
L
CAT
CAT(DASHED LINES)
CATALOGUE NO. E41102, E41202
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:54:41 AM
TFI Bending & Die Brochure.indd 29 1/16/2008 1:23:38 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 30
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
170
170
190
180
180
200
210
220
L
W
W
L
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
CATALOGUE NO. E41908
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:55:07 AM
TFI Bending & Die Brochure.indd 30 1/16/2008 1:23:38 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 31
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
170
170
190
180
180
200
210
220
L
W
W
L
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
CATALOGUE NO. E42610
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:55:39 AM
TFI Bending & Die Brochure.indd 31 1/16/2008 1:23:39 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 32
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
170
170
190
180
180
200
210
220
L
W
W
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
L
CATALOGUE NO. E44000
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:55:58 AM
TFI Bending & Die Brochure.indd 32 1/16/2008 1:23:39 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 33
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
170
170
190
180
180
200
210
220
L
W
W
L
W
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
CATALOGUE NO. E44030
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:56:35 AM
TFI Bending & Die Brochure.indd 33 1/16/2008 1:23:39 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 34
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
170
170
190
180
180
200
210
220
L
W
W
L
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
CATALOGUE NO. E44020
Bend Limit Graph
36
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:56:55 AM
TFI Bending & Die Brochure.indd 34 1/16/2008 1:23:39 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 35
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
170
170
190
180
180
200
210
220
L
W
W
L
W
Z1 STYLE(DASHED LINES)
Z2 STYLE(SOLID LINES)
CATALOGUE NO. E44010
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:57:22 AM
TFI Bending & Die Brochure.indd 35 1/16/2008 1:23:40 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 36
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
17077
170
190
180
180
200
210
220
Z1 STYLE(DASHED LINES)
(SOLID LINES)Z2 STYLE
CATALOGUE NO. E44040
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 3:58:08 AM
TFI Bending & Die Brochure.indd 36 1/16/2008 1:23:41 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 37
10
10
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
120
120
130
130
140
140
150
150
160
160
170
170
190
180 190 2
180
200
210
220
230
240
L
W
W
L
CATALOGUE NO. E43002
Bend Limit Graph
C
M
Y
CM
MY
CY
CMY
K
Wilson - Deleted 1.pdf 25-Jun-07 4:02:27 AM
TFI Bending & Die Brochure.indd 37 1/16/2008 1:23:41 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 38
68
20
25
12
12
10
68
16
68
86
25
12
R3
R0.8R0. 4
R0. 5 R2.75
R2.75
88 Bending MatrixPart No. F70/88-01
max 100 t/n
TFI Bending & Die Brochure.indd 38 1/16/2008 1:23:41 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 39
60 Bending MatrixPart No. F70/60-01
68
20
25
12
12
10
68
16
68
86
25
12
R3
R0.8R0. 5
R0. 8 R0. 8
R2.75
V mm max t/m
6 60
8 60
10 60
12 60
16 80
20 80
TFI Bending & Die Brochure.indd 39 1/16/2008 1:23:41 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 40
45 Bending MatrixPart No. F70/45-01
68
20
25
12
12
10
68
16
68
86
25
12
R3
R1.2R0.8
R1 R1.6
R2.75
V mm max t/m
6 40
8 40
10 50
12 50
16 70
20 70
TFI Bending & Die Brochure.indd 40 1/16/2008 1:23:41 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 41
35 Bending MatrixPart No. F70/35-01
68
20
25
12
12
10
68
16
68
86
25
12
R3
R1.2R0.8
R1 R1.6
R3
V mm max t/m
6 30
8 35
10 45
12 45
16 50
20 50
TFI Bending & Die Brochure.indd 41 1/16/2008 1:23:42 PM
TIR
V
MF
160
123.
226
.7
45.0
63.0
112.
015
2.0
125
96.3
20.8
28.0
40.5
52.5
84.0
144.
0
V (m
m)
MF
IR T O N S P E R M E T R E
74.
91.
2
3.3
7.2
10.0
14.0
85.
61.
3
3.2
5.6
9.0
13.2
15.4
10 7.0
1.7
4.4
7.0
10.8
14.0
17.6
12 8.6
2.0
5.5
8.4
12.6
16.0
22.0
1410
.1 2.3
7.5
9.8
14.4
20.0
25.3
1611
.5 2.7
6.6
8.8
11.2
18.0
23.0
28.6
200
154.
033
.3
54.0
84.0
118.
817
6.0
225.
0
250
192.
541
.7
72.0
99.8
137.
517
5.0
270.
0
100
75.0
16.7
24.0
31.5
56.3
70.0
108.
0
8060
.013
.3
22.5
31.5
43.8
72.0
90.0
6347
.310
.5
14.0
18.0
20.3
26.3
37.5
56.0
5037
.5 8.3
14.4
15.8
22.0
28.1
35.0
54.0
4030
.0 6.7
16.5
17.6
21.9
28.0
36.0
45.0
60.0
3224
.0 5.3
12.7
14.3
21.0
22.4
28.0
36.0
45.0
55.0
2518
.0 4.2
11.0
14.4
18.2
27.0
28.8
35.0
44.0
2014
.4 3.3
8.8
14.0
18.4
23.4
30.0
35.2
22*1
5.8
3.7
12.5
16.1
20.8
28.5
331
.938
.5
1813
.0 3.0
7.7
10.0
16.0
20.7
26.0
33.0
THIC
KN
ES
S0.
5mm
0.6m
m0.
8mm
1.0m
m1.
2mm
1.4m
m1.
6mm
2.0m
m2.
3mm
2.6m
m3.
0mm
3.2m
m3.
5mm
4.0m
m4.
5mm
5.0m
m6.
0mm
7.0m
m9.
0mm
10.0
mm
12.0
mm
16.0
mm
19.0
mm
22.0
mm
25.0
mm
30.0
mm
42.
80.
7
4.5
6.0
64.
21.
0
2.8
4.2
8.0
11.0
AIR
BE
ND
ING
FO
RC
E C
HA
RT
ME
TR
ICS
TAN
DA
RD
FO
RM
ULA
S F
OR
SE
LEC
TIN
G A
V-O
PE
NIN
G
MA
TE
RIA
L T
HIC
KN
ES
S:2
.6m
m O
R L
ES
S =
T x
63.
0mm
- 8
.0m
m =
T x
89.
00m
m -
12.
00m
m =
T x
10
14.0
0mm
& T
HIC
KE
R =
T x
12
NO
TE
:Th
e ab
ove
form
ulas
are
for
ref
eren
ce o
nly.
For
mor
e sp
ecifi
c in
form
atio
n, p
leas
e re
fer
to t
he c
hart
bel
ow.
T =
MA
TE
RIA
L T
HIC
KN
ES
S
•
V =
V-O
PE
NIN
G
•
MF
= M
INIM
UM
FL
AN
GE
LE
NG
TH
•
IR
= I
NS
IDE
RA
DIU
STh
e b
end
ing
forc
e (to
nnag
e) f
igur
es li
sted
ab
ove
are
bas
ed o
n m
ild s
teel
with
a t
ensi
lest
reng
th o
f 45
-50
kilo
gram
s p
er s
qua
re m
illim
etre
. To
cal
cula
te t
he a
pp
roxi
mat
e b
end
ing
forc
e (to
nnag
e) r
equi
rem
ents
for
oth
er m
ater
ials
, p
leas
e us
e th
e m
ultip
liers
list
ed.
Sof
t B
rass
......
......
......
......
......
......
.Ton
s P
er M
etre
x 5
0%S
oft
Alu
min
ium
......
......
......
......
.....
Tons
Per
Met
re x
50%
Hea
t Tre
ated
Alu
min
ium
Allo
ys...
..To
ns P
er M
etre
x 1
00%
Sta
inle
ss S
teel
......
......
......
......
......
Tons
Per
Met
re x
150
%
Not
e:*
Bas
ed o
n be
ndin
g to
an
incl
uded
ang
le o
f 88
deg
rees
.Thi
s di
men
sion
will
incr
ease
whe
n be
ndin
g to
an
incl
uded
ang
le o
f le
ss t
han
88 d
egre
es.
TFI Bending & Die Brochure.indd 42 1/16/2008 1:23:42 PM
Iran (Headquarter)TehranP.O. Box: 19835-314Tel: +98 (21) 8804 6781-3 Fax: +98 (21) 8804 6784
UAE OfficeDubaiP.O. Box: 261 276Tel: +971 (4) 2248203Fax: +971 (4) 224 8204
KSA OfficeJeddah - P.O.Box: 42109 / 21541 Tel: +966 (2) 653 1611Fax: +966 (2) 653 3532
Iran Plant 1Tel: +98 (21) 6680 7711Fax: +98 (21) 6680 1928
Iran Plant 2Tel: +98 (1326) 42 2107Fax: +98 (1326) 42 2265 UAE PlantRAK - P.O.Box: 10559Tel: +971 (7) 266 0037
KSA PlantJeddahTel: +966 (2) 625 2640Fax: +966 (2) 625 2650
Cutting edge provider
C
M
Y
CM
MY
CY
CMY
K
Last Page.pdf 25-Jun-07 4:18:46 AM
TFI Bending & Die Brochure.indd 43 1/16/2008 1:23:42 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 44
TFI Bending & Die Brochure.indd 44 1/16/2008 1:23:42 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 45
TFI Bending & Die Brochure.indd 45 1/16/2008 1:23:42 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 46
TFI Bending & Die Brochure.indd 46 1/16/2008 1:23:42 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 47
TFI Bending & Die Brochure.indd 47 1/16/2008 1:23:42 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 48
TFI Bending & Die Brochure.indd 48 1/16/2008 1:23:42 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 49
TFI Bending & Die Brochure.indd 49 1/16/2008 1:23:42 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 50
TFI Bending & Die Brochure.indd 50 1/16/2008 1:23:42 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 51
TFI Bending & Die Brochure.indd 51 1/16/2008 1:23:43 PM
Tel: +971 (4) 224 8203Fax: +971 (4) 224 8204Email: uaeoffice@tfico.com 52
TFI Bending & Die Brochure.indd 52 1/16/2008 1:23:43 PM
top related