Transcript
modelmakingpre-wired entertainment center
It was realized there was difficulty in fitting and rewiring electrical components in most commercially available entertainment centers.
The solution called for ease in adding components to an existing entertainment system; not only with proper fit into the entertainment center inself, but also in wiring the components together easily.
modelmakingpre-wired entertainment center
Clients can choose from eight plans and eight profiles for sixty-four different design solutions. Each design allows for adjustment, additon, or even removal of com-ponents shelves. The shelves also pull out 100% the depth of the shelf and rotate 90 degrees for easy access of the real of the component.
modelmakingpre-wired entertainment center
Each design allows for adjustment, addi-ton, or even removal of components shelves. The shelves also pull out 100% the depth of the shelf and rotate 90 degrees for easy access of the rear of the component.
modelmakingpre-wired entertainment center
modelmakingpre-wired entertainment center
The entertainment center is wired so that electronics are plugged directly into the enter-tainment center rather that from unit to unit. The entertainment center wiring ports are reflective of those on the rear of electronic components that are used in entertainment systems.
modelmakingpre-wired entertainment center
modelmakingpre-wired entertainment center
modelmakingpre-wired entertainment center
top related