Transcript
Glue System Control provides greater flexibility and glue volume control,
reduces the amount of glue required, and reduces tack time.
The set-up is operator friendly and requires very little work. COPAR uses a three-way valve thathas both glue and water feeding the extruder. The valve can be easily switched for quick andeasy clean-up. This method reduces end-of-shift or end-of-day clean-up time to seconds.
DIGITAL GLUE SYSTEM CONTROL
The glue control system, con-sisting of air and glue filter andair and glue pressure controlsis contained in a single win-dowed cabinet. This unit alsocauses the glue pressure to fol-low changes in speed of thematerial to be glued. Thedesign of the pressure regulat-ing system prevents over-gluingof a carton after a stop.
GLUE PRESSURE CONTROL
GLUE PUMPProvides long, reliable service toone or multiple glue systems.Neoprene diaphragms are stan-dard. Teflon diaphragms areoffered as an option. The gluepump uses filtered air from theglue pressure control cabinet. Noelectrical power is required tooperate the pump.
GLUE APPLICATOR ASSEMBLYTwo applicator sub-assem-blies are provided so thattop down or bottom upchangeover is accom-plished in a matter of lessthan a minute. Standardapplicator heads produce aone inch wide pattern bymeans of five holes on 1/4"
centers. Nine holes on 1/8" centers available on request.Fixed pattern widths to 4": adjustable to 6".
Minimizes the problem ofboxes sticking together on theinside or extruded glue outside,preventing problems withcustomers automatic packingmachinery.
Glue flow stops automati-cally when the machine stops,even when a carton stopsunder the glue extruder.
The DGSC requires lesscleanup time. It reduces end-of-shift or end-of-day cleanuptime to seconds. There areno parts to remove or soakovernight.
The pattern position is main-
tained constant regardless ofspeed changes between0 and 1800 fpm (550 mpm).
The DGSC eliminates com-mon problems such as sling-ing of glue and having trimwaste scrape glue off thewheel surface.
The amount of glue beingapplied can be adjusted by thedial on the front operator panel.Once a proper application ratehas been selected, the controlwill automatically adjust theglue pressure to maintain theproper application as themachine speed changes.
DGSC Cabinet Dimensions
(HxWxD)
Control Cabinet:14" x 16" x 6.535.5cm x 40.6cm x 16.5cm
Pressure Control:16.25" x 14.5" x 7.75"42cm x 37cm x 20cm
Power Required:120V 50/60Hz or220V 50/60Hz
A U.S. Manufacturer and Service Provider for over 50 years
5744 West 77th Street Burbank, Illinois 60459 U.S.A. Telephone (708) 496-1859 Fax (708) 496-0079
Email: Info@Copar.com www.Copar.com
COPAR Corpora t ion
DIGITAL GLUE EXTRUSTION SYSTEM
IMPROVED DESIGN INCLUDES:
COPAR’S Stitch Gluing
Next Order Entry
Optional Non-Contact Extrusion Heads
Digital Pattern Entry
Solid State Circuitry Design
Fewer Components
Flexible Programming
Overload Protection On All Valve Outputs
Data Retention During Power Outages
Capable Of Precise Adjustments During Operation
Inputs And Outputs Separated
Configuration Parameters Entered Digitally
Total Of 2 Circuit BoardsOne Main Processor Board And One Display Board
LED Status IndicatorsFor Programming And Troubleshooting
Dual Channel Digital Glue System Control(2) Glue Heads
Purge Box Assemblies
Sensor Assembly Mini Beam 1.7 Focus
Encoder Cable 30’ Long
Manual
5744 West 77th Street, Burbank, Illinois, 60459 Telephone: (708) 496-1859 Fax: (708) 496-0079
Email: Info@Copar.com www.Copar.com
Individual componentscan replace existing
competitor’s components
CoparQuality Industrial Products
For Over 50 Years
COPAR Corpora t ion
top related