brochure_i-bana_a4_uk_ar

A U T O M A T I C M A C H I N E S

i-ban Automated workbenches

The i-ban workbenches are designed to make the manually performed works on plants as easy as possible.Each workbench is equipped and linked to the others by means of a conveyor belt system which creates a product flow from and towards the users.These workbenches are mainly used for manual grafting and manual transplanting.

Each workbench is served by three conve-yors, each situated one above the other, in order to create an incoming product flow (to be processed) towards the workstation and an outgoing product flow (already processed) from it.

A U T O M A T I C M A C H I N E S

Techmek S.r.l. via Spineda, 16 - 31040 Volpago del Montello (TV) ITALY Tel. +39.0423.24439 Fax +39.0423.615032 info@techmek.it - www.techmek.it

Administrative Center - Via Anassilide, 148 31044 Montebelluna (TV) ITALY

Automated workbenches

i-banWhile grafting, which is the most spread use of this system, each user can

easily reach both the scions (conveyor belt no. 1) and the stocks (conveyor

belt no. 2) without moving from their positions.

Finally, the grafted plants are placed onto the back conveyor belt (conveyor

belt no. 3) which transports them at the beginning of the plant where the

plant coordinator operates.

At the beginning of the plant, in fact, there is an operator who loads scions

and stocks separately and receives the grafted plants in turn.

A single operator serves 12 grafting operators at the same time.

Technical specifications

- Bench size: 1400 x 1000 x 800 (height) mm

- Conveyor belt length 12000 mm

- Pneumatic feeding: 6bar

- Installed power: 1.5 Kw

- Power supply: 380V + neutral

- Lighting on each station

- 220 V service socket for each station

- Radio and CD-player system