Transcript
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
Alloy 825Ni39.5/Fe32/Cr22/Mo 3/Cu 2/Ti
131 -
Aluchrom O1 - ResistanceAlloyFe70/Cr25/Al 5
135-145 0.00007
Aluminium alloy 6061Al97.5/Mg 1/Si 0.6/Fe 0.5/Cu0.4
3.9-4.1 -
Aluminum alloy 2011Al93/Cu 5.3/Fe 0.7/Si 0.4/Pb0.3/B
4.5 -
Aluminum alloy 6082Al97.4/Si 1/Mg 0.9/Mn 0.7
3.8 -
Aluminum alloy 7075Al90/Zn 5.5/Mg 2.5/Cu 1.5/Si0.5
5.15 -
Aluminum alloy EN AC 42100Al 91.7/Si 7/Mg 0.3
4 -
Aluminum/Magnesium/Manganese/ChromiumAl96.45/Mg 2.6/Mn 0.8/Cr0.15
5.1 -
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 0.6
3.4-3.8 0.0030
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 1
3.4-3.8 0.0031-0.0035
Aluminum/Magnesium/SiliconAl99/Mg 0.5/Si 0.5
3.2 -
Aluminum/MagnesiumAl95/Mg 5
5.6-6.1 0.0020
Aluminum/MagnesiumAl97/Mg 3
4.5-5.7 0.0019-0.0026
Aluminum/MagnesiumAl97.5/Mg 2.5
4.95 -
Aluminum/Silicon/Magnesium/ManganeseAl97.5/Si 1.0/Mg 0.8/Mn 0.7
3.8 -
Aluminum/SiliconAl88/Si12
5.56 -
1
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
Aluminum/SiliconAl99/Si 1
2.6-3.5 0.0042
Antimonial LeadPb96/Sb 4
24.0 -
Bismuth/LeadBi55.5/Pb44.5
43.0 -
BrassCu63/Zn37
6.2-6.6 0.0016-0.0017
BrassCu70/Zn30
6.2-7.8 0.0012-0.0016
BronzeCu89/Sn11
14-17 0.0006
Chromaloy O1 - ResistanceAlloyFe75/Cr20/Al 5
137 0.00007
Cobalt/Chromium/Iron/Nickel/Molybdenum/ManganeseCo40/Cr20/Fe15/Ni15/Mo 7/Mn 2/C/Be
95 -
Cobalt/Chromium/Tungsten/Nickel/Iron/ManganeseCo50/Cr20/W 15/Ni10/Fe 3/Mn 2
88.6 -
Constantan - ResistanceAlloyCu55/Ni45
52.0 +/-0.00002
Copper/BerylliumCu98/Be 2
5.4-11.5 0.0010-0.0018
Copper/Chromium/ZirconiumCu98.9/Cr 1.0/Zr 0.1
1-2 -
Copper/NickelCu70/Ni30
37.4 -
Copper/TelluriumCu99.5/Te 0.5
1.92 -
Dural1 - Aluminum/Copper/MagnesiumAl95/Cu 4/Mg 1
5.0 0.0022-0.0026
Evanohm1 - PrecisionResistance AlloyNi75/Cr20/Al 2.5/Cu 2.5
134 0.00001
2
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
Fecralloy1 - Iron/ChromiumFe72.8/Cr22/Al 5/Y 0.1/Zr 0.1
134 0.0001
Gilding MetalCu85/Zn15
4.6-5.4 0.0014-0.0016
Glass Sealing AlloyFe54/Ni29/Co17
48.9 0.0037
Gold/NickelAu82/Ni18
15.5 -
Hastelloy1 B - CorrosionResistant AlloyNi62/Mo28/Fe 5/Cr/Mn/Si
137 -
Hastelloy1 C276 - HeatResisting AlloyNi57/Mo17/Cr16/Fe/W/Mn
125-130 -
Hastelloy1 XNi49.5/Cr22/Fe18/Mo 9/Co 1/W
118 -
Havar1 - High-Strength Non-Magnetic AlloyCo42.5/Cr20/Ni13/Fe/W/Mo/Mn
92 -
Haynes1 230 alloyNi62/Cr22/W 14/Mo 2
125 -
High Permeability MagneticAlloyNi80/Fe15/Mo 5
55 -
Incoloy1 alloy 800 - HeatResisting AlloyNi32.5/Cr21/Fe
20 -
Inconel 6251 - CorrosionResistant AlloyNi61/Cr22/Mo 9/Fe 5
129 -
Inconel1 617Ni57/Cr22/Co12/Mo 9
1.22-1.34 -
Inconel1 alloy 600 - HeatResisting AlloyNi72/Cr16/Fe 8
103 -
Inconel1 alloy 718 - HeatResisting AlloyNi53/Fe19/Cr19/Nb/Mo/Ti
125 -
Inconel1 X750 - HeatResisting AlloyNi74/Cr15/Fe 7/Ti/Al/Nb
122-124 -
3
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
Indium/SilverIn97/Ag 3
7.5 -
Indium/TinIn50/Sn50
15 -
Invar1 - Controlled ExpansionAlloyFe64/Ni36
75-85 -
Iron/Chromium/MolybdenumFe90/Cr 9/Mo 1
49.9 -
Iron/NickelFe50/Ni50
44 -
Iron/NickelFe52/Ni48
49 -
Iron/NickelFe55/Ni45
45 -
Iron/NickelFe58/Ni42
68 -
Leaded BrassCu58/Zn39/Pb 3
6.2 -
Magnesium Alloy AZ61Mg93/Al 6/Zn 1
12.5 -
- -
Magnetic Shape MemoryAlloyNi50/Mn28/Ga22 (Atomic %)
70 0.003
Magnetic Shielding AlloyNi77/Fe14/Cu 5/Mo 4
55-62 -
Manganin1 - Resistance AlloyCu86/Mn12/Ni 2
43-48 0.00001
Molybdenum HighTemperature Alloy TZMMo99/Ti 0.5/Zr 0.1
5.3-5.5 -
Monel1 alloy 400Ni65/Cu33/Fe 2
48-51 0.0019
Monel1 alloy K-500Ni63/Cu30/Al3/Fe2/Mn1.5/Ti0.5
61 -
Neodymium/Iron/BoronNd2Fe14
B1.1-1.7 -
Nickel Silver (18)Cu65/Ni18/Zn17
28.7 -
Nickel SilverCu62/Ni18/Zn20
29 0.0003
4
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
Nickel SilverCu64/Ni12/Zn24
130 -
Nickel/Beryllium/TitaniumNi97.5/Be 1.95/Ti 0.5
43 -
Nickel/ChromiumNi80/Cr20
108 0.00005
Nickel/CopperNi70/Cu30
48 -
Nickel/IronNi52/Fe48
45 0.0034
Nickel/IronNi80/Fe20
62 -
OFHC CopperOFHC
1.70 0.0038-0.0039
Palladium/SilverPd75/Ag25
35 0.001
Permendur 491
Co49/Fe49/V 240 -
Phosphor BronzeCu94/Sn 6
11.0-16.0 0.0006-0.0007
Platinum/IridiumPt70/Ir30
35 0.001
Platinum/IridiumPt75/Ir25
31-32 0.001
Platinum/IridiumPt80/Ir20
31-32 0.001
Platinum/IridiumPt85/Ir15
28.5-29.0 -
Platinum/IridiumPt90/Ir10
25 0.0013
Platinum/RhodiumPt60/Rh40
17.5 0.0014
Platinum/RhodiumPt70/Rh30
18.8 0.0014
Platinum/RhodiumPt87/Rh13
19.0 0.0016
Platinum/RhodiumPt90/Rh10
18.4-19.2 0.0017
Platinum/RhodiumPt94/Rh 6
19.2 0.0017
5
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
Platinum/TungstenPt92/W 8
62-68 0.00025
Silver/CopperAg72/Cu28
2 -
Silver/PalladiumAg70/Pd30
14.84 -
Stainless Steel - 15-7PHFe/Cr15/Ni 7/Mo 2.25
80 -
Stainless Steel - 17-4PHFe/Cr17/Ni 4
70-80 -
Stainless Steel - 17-7PHFe/Cr17/Ni 7
80-85 -
Stainless Steel - AISI 301Fe/Cr17/Ni 7/C 0.1max
70-72 -
Stainless Steel - AISI 302Fe/Cr18/Ni 8
70-72 -
Stainless Steel - AISI 303Fe/Cr18/Ni 9/Mn/Si
72 -
Stainless Steel - AISI 304LFe/Cr18/Ni10
72 -
Stainless Steel - AISI 304Fe/Cr18/Ni10
70-72 -
Stainless Steel - AISI 310Fe/Cr25/Ni20
70-78 -
Stainless Steel - AISI 316Fe/Cr18/Ni10/Mo 3
70-78 -
Stainless Steel - AISI 321Fe/Cr18/Ni 9/Ti
70-73 -
Stainless Steel - AISI 347Fe/Cr18/Ni10/Nb
70-73 -
Stainless Steel - AISI 410Fe/Cr12.5
56-72 -
Stainless Steel - AISI 420Fe86.7/Cr13.0/C 0.3
55 -
Stainless Steel - DuplexFe/Cr22/Ni 5.5/Mo 3/N
80 -
Sterling SilverAg92.5/Cu 7.5
1.8 -
T1 - Thermocouple AlloyNi90/Cr10
70.6 0.00032
6
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
T2 - Thermocouple AlloyNi95/(Al+Mn+Si) 5
29-33 0.0019
Tantalum/TungstenTa90/W 10
17.6 -
Tin/Lead/AntimonySn60/Pb39/Sb 1
14.8 -
Tin/SilverSn96/Ag 4
10.5 -
Tinned CopperCuSn
1 - 2 -
Titanium/Aluminum/VanadiumTi90/Al 6/V 4
168 0.0004
Titanium/Aluminum/VanadiumTi94.5/Al 3/V 2.5
126 -
Titanium/Molybdenum/Niobium/Aluminum/SiliconTi78.8/Mo15/Nb 3/Al 3/Si 0.2
135 -
Tungsten/CopperW 60/Cu40
3.7 -
Tungsten/CopperW 80/Cu20
4.1 -
Tungsten/RheniumW 75/Re25
29 -
Tungsten/RheniumW 95/Re 5
9.5 -
Tungsten/RheniumW 97/Re 3
9.5 -
Waspaloy1 - Heat ResistingAlloyNi58/Cr19/Co14/Mo/Ti/Al/Fe
120-130 -
7
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Magnetic Properties
Coercivity (Hc)A m-1
Curie temperatureC
Initial permeability Maximumpermeability
Remanence fromsaturation (Brem)
T
Saturation fluxdensity
T
Saturation InductionT
Alloy 825Ni39.5/Fe32/Cr22/Mo 3/Cu 2/Ti
- -196 1.005 - - - -
Aluchrom O1 - ResistanceAlloyFe70/Cr25/Al 5
- 600 - - - - -
Chromaloy O1 - ResistanceAlloyFe75/Cr20/Al 5
- 600 - - - - -
Fecralloy1 - Iron/ChromiumFe72.8/Cr22/Al 5/Y 0.1/Zr 0.1
- 600 - - - - -
Glass Sealing AlloyFe54/Ni29/Co17
- 435 - - - - -
Hastelloy1 XNi49.5/Cr22/Fe18/Mo 9/Co 1/W
- - 1.002 - - - -
Inconel 6251 - CorrosionResistant AlloyNi61/Cr22/Mo 9/Fe 5
- -196 1.0006 - - - -
Inconel1 alloy 600 - HeatResisting AlloyNi72/Cr16/Fe 8
- -124 1.010 - - - -
Inconel1 alloy 718 - HeatResisting AlloyNi53/Fe19/Cr19/Nb/Mo/Ti
- <-196 1.0013 - - - -
Inconel1 X750 - HeatResisting AlloyNi74/Cr15/Fe 7/Ti/Al/Nb
- -193 1.0020 - - - -
Invar1 - Controlled ExpansionAlloyFe64/Ni36
- 279 - - - - -
Iron/NickelFe50/Ni50
- 530 - - - - -
Iron/NickelFe55/Ni45
8 450 6000 40000 1.0 - 1.6
Iron/NickelFe58/Ni42
- 380 - - - - -
Magnetic Shape MemoryAlloyNi50/Mn28/Ga22 (Atomic %)
4000 95 - 105 2 45 0.02 0.6 -
Magnetic Shielding AlloyNi77/Fe14/Cu 5/Mo 4
1.0 380 60000 240000 0.37 - 0.77
8
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Magnetic PropertiesCoercivity (Hc)
A m-1Curie temperature
CInitial permeability Maximum
permeabilityRemanence fromsaturation (Brem)
T
Saturation fluxdensity
T
Saturation InductionT
Monel1 alloy K-500Ni63/Cu30/Al3/Fe2/Mn1.5/Ti0.5
- -134 - - - - -
Neodymium/Iron/BoronNd2Fe14
B875-1990 310 - - 1.0-1.3 - -
Nickel/Iron/MolybdenumNi80/Fe15.5/Mo 4.5
1.2 450 50000 250000 0.35 - 0.8
Nickel/IronNi80/Fe20
<0.02 460 30000 400000 - 0.77 -
Permendur 491
Co49/Fe49/V 2- 940 - - - 2.34 -
T2 - Thermocouple AlloyNi95/(Al+Mn+Si) 5
- - - 1.07 - - -
9
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Mechanical Properties
Elongation atbreak%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Alloy 825Ni39.5/Fe32/Cr22/Mo 3/Cu 2/Ti
<45 100-200 - - - 196 - - 550-585
Aluchrom O1 - ResistanceAlloyFe70/Cr25/Al 5
15 - - - - - - - 650-1000
Aluminium alloy 6061Al97.5/Mg 1/Si 0.6/Fe 0.5/Cu0.4
12-25 - - - - - - - 124-290
Aluminum alloy 2011Al93/Cu 5.3/Fe 0.7/Si 0.4/Pb0.3/B
<15 - - 110 - 71 220 - 365
Aluminum alloy 7075Al90/Zn 5.5/Mg 2.5/Cu 1.5/Si0.5
5-8% 150 - - - - 331 - 510-538
Aluminum alloy EN AC 42100Al 91.7/Si 7/Mg 0.3
8 60 - - - 74 90 - 175
Aluminum/Lithium/CopperAl95/Li 2.5/Cu 1.5/Mg 1
5.1 130 - - - 77 - - 550
Aluminum/Magnesium/Manganese/ChromiumAl96.45/Mg 2.6/Mn 0.8/Cr0.15
>10 - - 60 - 70.5 - - 159
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 0.6
<20 10-100 - - 27-34 70 160-200 - 150-430
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 1
<20 65-95 - - - 69 - - 245-325
Aluminum/Magnesium/SiliconAl99/Mg 0.5/Si 0.5
<16 - - - - 69.5 - - 90-300
Aluminum/MagnesiumAl95/Mg 5
<20 60-120 - - - - 150-230 - 300-450
Aluminum/MagnesiumAl97/Mg 3
<25 45-100 - - 30-50 65-75 125-175 - 200-350
Aluminum/MagnesiumAl97.5/Mg 2.5
<14 - - 70 - 70 135 - 210
Aluminum/Silicon/Magnesium/ManganeseAl97.5/Si 1.0/Mg 0.8/Mn 0.7
11 - - 100 - 70 210 - 340
10
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Aluminum/SiliconAl88/Si12
<20 - - - - 71.1 - - 241.5
Aluminum/SiliconAl99/Si 1
- - - - - - - - 310
Antimonial LeadPb96/Sb 4
<50 8-24 - - - - - - 28-75
Bismuth/LeadBi55.5/Pb44.5
<37.5 15.0 - - - - - - 44.1
BrassCu63/Zn37
<55 65-136 - - - 95-110 280-310 - 330-500
BrassCu70/Zn30
<65 65-160 - - 50-90 100-115 200-400 - 300-700
BronzeCu89/Sn11
<65 70-200 - - - 80-110 230-490 - 300-900
Chromaloy O1 - ResistanceAlloyFe75/Cr20/Al 5
15 - - - - - - - 650
Cobalt/Chromium/Iron/Nickel/Molybdenum/ManganeseCo40/Cr20/Fe15/Ni15/Mo 7/Mn 2/C/Be
- - - - - 200 - - 800 - 2200
Cobalt/Chromium/Tungsten/Nickel/Iron/ManganeseCo50/Cr20/W 15/Ni10/Fe 3/Mn 2
<58.5 - - - - 225 - - 860
Constantan - ResistanceAlloyCu55/Ni45
<45 100-300 - - 107 162 - - 400-590
Copper/BerylliumCu98/Be 2
<50 100-360 - - - 120-160 - - 500-1300
Copper/Chromium/ZirconiumCu98.9/Cr 1.0/Zr 0.1
<20 130-170 - 140-180 - - - - 450-600
Copper/Cobalt/BerylliumCu97/Co 2.5/Be 0.5
- 242 - 255 - - - - 900
Copper/NickelCu70/Ni30
<45 - - - - - - - 410-420
Copper/TelluriumCu99.5/Te 0.5
<12 - - 90-100 - - - - 260
Dural1 - Aluminum/Copper/MagnesiumAl95/Cu 4/Mg 1
<22 115-135 - - 8-22 73 - - 420-500
11
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Evanohm1 - PrecisionResistance AlloyNi75/Cr20/Al 2.5/Cu 2.5
<33 - - - 42-100 221 - - 1210
Fecralloy1 - Iron/ChromiumFe72.8/Cr22/Al 5/Y 0.1/Zr 0.1
<25 - - 230 - - - - 560
Gilding MetalCu85/Zn15
<60 65-125 - - 67-125 110-125 210-400 - 250-400
Glass Sealing AlloyFe54/Ni29/Co17
30 - - - - 207 - - 510-520
Gold/Germanium EutecticAu88/Ge12
- - - - - - - - 185
Gold/NickelAu82/Ni18
<13 - - - - 112 - - 616
Gold/TinAu80/Sn20
- - - - - - 270-280 - 270-280
Hastelloy1 B - CorrosionResistant AlloyNi62/Mo28/Fe 5/Cr/Mn/Si
<60 100-230 - - 42-100 180-220 - - 600-980
Hastelloy1 B-3Ni65/Mo28.5/Cr 1.5/Fe 1.5/(Co+ Mn + W ) 3.5max
<53 - - - - 216 - - 1000-1200
Hastelloy1 C276 - HeatResisting AlloyNi57/Mo17/Cr16/Fe/W/Mn
<52 80-200 - - 42-100 170-220 - - 550-900
Hastelloy1 XNi49.5/Cr22/Fe18/Mo 9/Co 1/W
<46 - - - - - - - 740-760
Havar1 - High-Strength Non-Magnetic AlloyCo42.5/Cr20/Ni13/Fe/W/Mo/Mn
1 - - - - 200-210 - - 960-970
Haynes1 230 alloyNi62/Cr22/W 14/Mo 2
<50 - - - - 211 - - 860
High Permeability MagneticAlloyNi80/Fe15/Mo 5
<50 - - 115-125 - 225 - - 500-700
Incoloy1 alloy 800 - HeatResisting AlloyNi32.5/Cr21/Fe
<45 180-250 - - 160 196 - - 400-900
Inconel 6251 - CorrosionResistant AlloyNi61/Cr22/Mo 9/Fe 5
<40 175-240 - - - 147-210 - - 950
12
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Inconel1 617Ni57/Cr22/Co12/Mo 9
<62 - - - 232 190-200 - - 730-760
Inconel1 alloy 600 - HeatResisting AlloyNi72/Cr16/Fe 8
<50 120-290 - - 160 157 420-570 - 600-1200
Inconel1 alloy 718 - HeatResisting AlloyNi53/Fe19/Cr19/Nb/Mo/Ti
<15 250-410 - - - 200 - - 800-1360
Inconel1 X750 - HeatResisting AlloyNi74/Cr15/Fe 7/Ti/Al/Nb
<20 150-280 - - - 210 118-152 - 700-1250
Indium/SilverIn97/Ag 3
- 2 - - - - - - 5
Indium/TinIn50/Sn50
83 - - - - - 11 - 12
Invar1 - Controlled ExpansionAlloyFe64/Ni36
<45 160 - - - 140-150 - - 450-590
Iron/Chromium/MolybdenumFe90/Cr 9/Mo 1
- - - - - - 410 - 590
Iron/NickelFe50/Ni50
<35 - - - - 159 - - 552
Iron/NickelFe52/Ni48
<30 - - - - 248 - - 450-550
Iron/NickelFe55/Ni45
- - - 240 - - - - 470
Iron/NickelFe58/Ni42
<30 - - - - 21.5 - - 566
Lead/TinPb75/Sn25
<53 - - - - - - - 23.6
Leaded BrassCu58/Zn39/Pb 3
<25 - - 100-160 - 97 - - 360-580
Magnesium alloy AZ31Mg96/Al 3/Zn 1
15 73 - - - 45 - - 290
Magnesium Alloy AZ61Mg93/Al 6/Zn 1
16 60 - - - - 140 - 310
Magnetic Shape MemoryAlloyNi50/Mn28/Ga22 (Atomic %)
- - - 130 - 8 - 20 - - -
Magnetic Shielding AlloyNi77/Fe14/Cu 5/Mo 4
- 105-290 - - 42-100 190-221 - - 530-900
13
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Manganin1 - Resistance AlloyCu86/Mn12/Ni 2
<50 - - - 107 124-159 - - 300-600
Molybdenum HighTemperature Alloy TZMMo99/Ti 0.5/Zr 0.1
<20 - - - - 320 - - 560-1150
Monel1 alloy 400Ni65/Cu33/Fe 2
<40 125-190 - - 110-140 185 - - 550-950
Monel1 alloy K-500Ni63/Cu30/Al3/Fe2/Mn1.5/Ti0.5
<45 - - - - 179 - - 630-1370
Neodymium/Iron/BoronNd2Fe14
B- - - 580 - 150 - - 75
Nickel Silver (18)Cu65/Ni18/Zn17
<45 - - - - 125 - - 385
Nickel SilverCu45/Zn43/Ni10/Pb2
<8 - - - - - - - 460
Nickel SilverCu62/Ni18/Zn20
<45 75-190 - - 110-130 120-135 290-400 - 400-700
Nickel SilverCu64/Ni12/Zn24
<3 - - <190 - 125 - - <620
Nickel/Beryllium/TitaniumNi97.5/Be 1.95/Ti 0.5
>4 - - 180-385 - 195-210 - - 895-1205
Nickel/ChromiumNi80/Cr20
<40 - - - - - - - 650-1100
Nickel/CopperNi70/Cu30
<50 100-260 - - 90-160 160-180 - - 480-1200
Nickel/IronNi52/Fe48
<13 - - - - 160 - - 147
Nickel/IronNi80/Fe20
<38 - - - - - - - 930
Nimonic1 alloy 90Ni53/Cr20/Co18/Ti 2.5/Al 1.5/Fe 1.5
33 - - 300 - - - - 1210
Niobium/ZirconiumNb99/Zr 1
5-30 - - 65-140 - - - - 330-620
OFHC CopperOFHC
10-45 - - 50-90 55-75 120-135 - 200-300 200-320
Palladium/CopperPd60/Cu40
- - - - - - - - 1100-1150
Palladium/SilverPd75/Ag25
- - - - - - - - >350
14
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Palladium/SilverPd77/Ag23
- - - - - - - - 350-700
Permendur 491
Co49/Fe49/V 26 - - - - - - - -
Phosphor BronzeCu94/Sn 6
<60 80-225 - - 62 90-120 250-430 - 320-740
Platinum/IridiumPt70/Ir30
<18 - - 280-285 - 236 - - 980-1100
Platinum/IridiumPt75/Ir25
<20 - - 230-240 - 218-220 - - 860-1500
Platinum/IridiumPt80/Ir20
<20 - - 190-200 - 198 - - 680-700
Platinum/IridiumPt85/Ir15
- - - 135-188 - 185.5-189.6 - - 517-981
Platinum/IridiumPt90/Ir10
<25 130-190 - - - - - - 380-620
Platinum/RhodiumPt60/Rh40
<30 - - 115-150 - - - - 569-588
Platinum/RhodiumPt70/Rh30
<30 130-238 - - - - - - 460-930
Platinum/RhodiumPt87/Rh13
<32 - - - - - - - 330-580
Platinum/RhodiumPt90/Rh10
<35 90-165 - - - - - - 320-620
Platinum/RhodiumPt94/Rh 6
<10 70-130 - - - - - - 300-610
Platinum/TungstenPt92/W 8
<5 - - 180 - 230 - - 895 - 2070
Stainless Steel - 15-7PHFe/Cr15/Ni 7/Mo 2.25
<30 - - - - - - - 1020
Stainless Steel - 17-4PHFe/Cr17/Ni 4
<11 - - - - - - - 1050-1150
Stainless Steel - 17-7PHFe/Cr17/Ni 7
<25 - - - 61-115 214 - - 1020-1550
Stainless Steel - AISI 301Fe/Cr17/Ni 7/C 0.1max
<60 165 - - 20-136 190-210 - - 550-1260
Stainless Steel - AISI 302Fe/Cr18/Ni 8
<60 160-190 - - 20-136 190-210 - - 510-1100
Stainless Steel - AISI 303Fe/Cr18/Ni 9/Mn/Si
<35 - - - - 193 - - 500-1000
15
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Stainless Steel - AISI 304LFe/Cr18/Ni10
<58 - - - - - - - 565
Stainless Steel - AISI 304Fe/Cr18/Ni10
<60 160-190 - - 20-136 190-210 - - 460-1100
Stainless Steel - AISI 310Fe/Cr25/Ni20
<50 170 - - 20-136 190-210 - - 530-1200
Stainless Steel - AISI 316Fe/Cr18/Ni10/Mo 3
<60 160-190 - - 20-136 190-210 - - 460-860
Stainless Steel - AISI 321Fe/Cr18/Ni 9/Ti
<60 160-190 - - 20-136 190-210 - - >560
Stainless Steel - AISI 347Fe/Cr18/Ni10/Nb
<60 160-190 - - 20-136 190-210 - - 520-1100
Stainless Steel - AISI 410Fe/Cr12.5
<38 140-175 - - 10-136 190-210 - - 480-1500
Stainless Steel - AISI 420Fe86.7/Cr13.0/C 0.3
>12 - - - - 200 - - 860
Stainless Steel - DuplexFe/Cr22/Ni 5.5/Mo 3/N
<25 <290 - - - 200 - - -
Sterling SilverAg92.5/Cu 7.5
<41 - - 71 - - - - 207
T1 - Thermocouple AlloyNi90/Cr10
<44 - - - 108 186 - - 620-780
T2 - Thermocouple AlloyNi95/(Al+Mn+Si) 5
<44 - - - 108 220 - - 550-780
Tantalum/TungstenTa90/W 10
<30 - - - - 205-207 - - 550-620
Tantalum/TungstenTa97.5/W 2.5
<20 - - 115-160 - 186 - - 240-310
Thoriated TungstenW 99/Th 1
<4 - - - - - - - 480
Tin/AntimonySn95/Sb 5
- - - - - - - - 44
Tin/SilverSn96/Ag 4
<49 - - - - - 82 - 98
Tinned CopperCuSn
<50 - - 40-120 - 117 - - 200-400
Titanium/Aluminum/VanadiumTi90/Al 6/V 4
>10 - - - 20 106-114 - - >895
Titanium/Aluminum/VanadiumTi94.5/Al 3/V 2.5
<15 - - - - 103.5 - - 830
16
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Titanium/Molybdenum/Niobium/Aluminum/SiliconTi78.8/Mo15/Nb 3/Al 3/Si 0.2
<14 - - - - 96-103 - - 930
Tungsten/CopperW 60/Cu40
- - 82 140 - - - - 460
Tungsten/CopperW 72/Cu28
- - 92 - - - - - 600
Tungsten/CopperW 80/Cu20
- - - - - - - - 675
Tungsten/Nickel/IronW 95/Ni 3.5/Fe 1.5
7 - - - - 280 - 320 - - 825
Tungsten/RheniumW 75/Re25
<20 - - - - 370-430 - - 1310-2100
Tungsten/RheniumW 95/Re 5
<20 - - - - - - - 220
Tungsten/RheniumW 97/Re 3
<15 - - - - - - - 1180
Waspaloy1 - Heat ResistingAlloyNi58/Cr19/Co14/Mo/Ti/Al/Fe
<33 - - - 42-100 221 - - 550-1210
Zinc/AluminumZn96/Al 4
5 92 - - - 85 - - 330
17
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Physical Properties
Densityg cm-3
Melting pointC
Alloy 825Ni39.5/Fe32/Cr22/Mo 3/Cu 2/Ti
8.14 2500
Aluchrom O1 - ResistanceAlloyFe70/Cr25/Al 5
7.1 1520
Aluminium alloy 6061Al97.5/Mg 1/Si 0.6/Fe 0.5/Cu0.4
2.7 585
Aluminum alloy 2011Al93/Cu 5.3/Fe 0.7/Si 0.4/Pb0.3/B
2.82 535
Aluminum alloy 6082Al97.4/Si 1/Mg 0.9/Mn 0.7
2.7 555
Aluminum alloy 7075Al90/Zn 5.5/Mg 2.5/Cu 1.5/Si0.5
2.8 447-635
Aluminum alloy EN AC 42100Al 91.7/Si 7/Mg 0.3
2.675 555
Aluminum/IronAl50/Fe50
- 1175
Aluminum/Lithium/CopperAl95/Li 2.5/Cu 1.5/Mg 1
2.53 600-655
Aluminum/Magnesium/Manganese/ChromiumAl96.45/Mg 2.6/Mn 0.8/Cr0.15
2.69 645
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 0.6
2.69 -
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 1
2.69 -
Aluminum/Magnesium/SiliconAl99/Mg 0.5/Si 0.5
2.7 655
Aluminum/MagnesiumAl95/Mg 5
2.65 -
Aluminum/MagnesiumAl97/Mg 3
2.67 -
Aluminum/MagnesiumAl97.5/Mg 2.5
2.68 605
18
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Aluminum/ManganeseAl99.7/Mn 0.3
2.42 -
Aluminum/NickelAl50/Ni50
- 1350
Aluminum/Silicon/Magnesium/ManganeseAl97.5/Si 1.0/Mg 0.8/Mn 0.7
2.70 555
Aluminum/SiliconAl65.7/Si34.3
- 860
Aluminum/SiliconAl75/Si25
- 760
Aluminum/SiliconAl88/Si12
2.66 577
Aluminum/SiliconAl90/Si10
- 600
Aluminum/SiliconAl98/Si 2
- 650
Aluminum/SiliconAl99/Si 1
2.7 600
Aluminum/TitaniumAl75/Ti25 (Atomic %)
3.11 -
Antimonial LeadPb95/Sb 5
- 194
Antimonial LeadPb96/Sb 4
11.04 250-300
Bismuth/LeadBi55.5/Pb44.5
10.44 124
Bismuth/TinBi58/Sn42
8.56 -
BrassCu63/Zn37
8.45 900-920
BrassCu70/Zn30
8.55 910-965
BronzeCu89/Sn11
8.9 830-1020
C-SolderSn based
7.4 232
Chromaloy O1 - ResistanceAlloyFe75/Cr20/Al 5
7.1 1500
Chromium/AluminumCr80/Al20
6.29 -
19
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Chromium/NickelCr50/Ni50
8.05 1335-1355
Chromium/TitaniumCr70/Ti30
- 1570
Cobalt/AluminumCo90/Al10
- 1400
Cobalt/Chromium/Iron/Nickel/Molybdenum/ManganeseCo40/Cr20/Fe15/Ni15/Mo 7/Mn 2/C/Be
8.3 1450 - 1460
Cobalt/Chromium/Tungsten/Nickel/Iron/ManganeseCo50/Cr20/W 15/Ni10/Fe 3/Mn 2
9.13 1330-1410
Cobalt/ChromiumCo70/Cr30
- 1470
Cobalt/TitaniumCo94/Ti 6
- 1450
Cobalt/TungstenCo50/W 50
- 1530
Constantan - ResistanceAlloyCu55/Ni45
8.9 1225-1300
Copper/BerylliumCu98/Be 2
8.25 860-1000
Copper/IronCu70/Fe30
- 1430
Copper/LeadCu80/Pb20
- 1010
Copper/NickelCu70/Ni30
8.94 1171
Copper/SiliconCu85/Si15
- 840
Copper/SilverCu70/Ag30
- 945
Copper/SilverCu98/Ag 2
- 1075
Copper/TinCu80/Sn20
8.1-8.9 880
Copper/TitaniumCu56.4/Ti43.6
- 980
20
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Copper/TitaniumCu70/Ti30
- 935
Copper/TitaniumCu90/Ti10
- 1000
Copper/ZirconiumCu70/Zr30
- 1140
Copper/ZirconiumCu87/Zr13
- 980
Dural1 - Aluminum/Copper/MagnesiumAl95/Cu 4/Mg 1
2.8 -
Evanohm1 - PrecisionResistance AlloyNi75/Cr20/Al 2.5/Cu 2.5
8.1 1340-1390
Fecralloy1 - Iron/ChromiumFe72.8/Cr22/Al 5/Y 0.1/Zr 0.1
7.22 1380-1490
Gallium/Indium/TinGa62/In22/Sn16
6.4 11
Gallium/Indium/TinGa68.5/In21.5/Sn10
6.4 11
Gallium/IndiumGa75.5/In24.5
6.35 15.7
Gilding MetalCu85/Zn15
8.75 1000-1025
Glass Sealing AlloyFe54/Ni29/Co17
8.36-8.50 1450
Gold/Germanium EutecticAu88/Ge12
- 340-350
Gold/NickelAu82/Ni18
15.8 955
Gold/PalladiumAu75/Pd25
16 1410
Gold/TinAu80/Sn20
- 280
Hastelloy1 B - CorrosionResistant AlloyNi62/Mo28/Fe 5/Cr/Mn/Si
9.24 1340-1390
Hastelloy1 B-2Ni68/Mo28/Fe 2/Cr 1/Co 1
9.22 1370
Hastelloy1 B-3Ni65/Mo28.5/Cr 1.5/Fe 1.5/(Co+ Mn + W ) 3.5max
9.22 1418
21
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Hastelloy1 C276 - HeatResisting AlloyNi57/Mo17/Cr16/Fe/W/Mn
8.94 1270-1390
Hastelloy1 XNi49.5/Cr22/Fe18/Mo 9/Co 1/W
8.22 1260-1355
Havar1 - High-Strength Non-Magnetic AlloyCo42.5/Cr20/Ni13/Fe/W/Mo/Mn
8.3 1480
Haynes1 230 alloyNi62/Cr22/W 14/Mo 2
8.97 1300-1370
High Permeability MagneticAlloyNi80/Fe15/Mo 5
8.8 -
Incoloy1 alloy 800 - HeatResisting AlloyNi32.5/Cr21/Fe
7.95 1350-1420
Inconel 6251 - CorrosionResistant AlloyNi61/Cr22/Mo 9/Fe 5
8.44 1290-1350
Inconel1 617Ni57/Cr22/Co12/Mo 9
8.36 1332-1380
Inconel1 alloy 600 - HeatResisting AlloyNi72/Cr16/Fe 8
8.42 1370-1425
Inconel1 alloy 718 - HeatResisting AlloyNi53/Fe19/Cr19/Nb/Mo/Ti
8.19 1260-1335
Inconel1 X750 - HeatResisting AlloyNi74/Cr15/Fe 7/Ti/Al/Nb
8.25 1390-1425
Indium/SilverIn97/Ag 3
7.38 143
Indium/TinIn50/Sn50
7.30 125
Indium/TinIn95/Sn 5
7.14 238
Invar1 - Controlled ExpansionAlloyFe64/Ni36
8.0 1427
Iron/Chromium/MolybdenumFe90/Cr 9/Mo 1
7.78 -
22
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Iron/NickelFe50/Ni50
8.39 1400-1450
Iron/NickelFe52/Ni48
8.2 1450
Iron/NickelFe55/Ni45
8.25 1400-1450
Iron/NickelFe58/Ni42
8.11 1450
Iron/SiliconFe83/Si17
- 1200
Iron/SiliconFe91/Si 9
- 1380
Iron/TitaniumFe60/Ti40
- 1380
Lead/TinPb75/Sn25
9.96 270
Leaded BrassCu58/Zn39/Pb 3
8.47 875
Magnesium alloy AZ31Mg96/Al 3/Zn 1
1.8 605-630
Magnesium Alloy AZ61Mg93/Al 6/Zn 1
1.8 525-610
Magnetic Shape MemoryAlloyNi50/Mn28/Ga22 (Atomic %)
8 1130
Magnetic Shielding AlloyNi77/Fe14/Cu 5/Mo 4
8.8 -
Manganese/NickelMn70/Ni30
- 1040
Manganese/NickelMn88/Ni12
7.08 -
Manganin1 - Resistance AlloyCu86/Mn12/Ni 2
8.4 960
Molybdenum HighTemperature Alloy TZMMo99/Ti 0.5/Zr 0.1
10.22 2500-2600
Molybdenum/RheniumMo52.5/Re47.5
13.48 -
Molybdenum/TitaniumMo80/Ti20
8.15 2520
Molybdenum/TitaniumMo90/Ti10
9.07 2600
23
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Monel1 alloy 400Ni65/Cu33/Fe 2
8.84 1300-1350
Monel1 alloy K-500Ni63/Cu30/Al3/Fe2/Mn1.5/Ti0.5
8.4 2400-2460
Neodymium/Iron/BoronNd2Fe14
B7.5 -
Nickel Silver (18)Cu65/Ni18/Zn17
8.73 1070-1110
Nickel SilverCu62/Ni18/Zn20
8.72 1060-1110
Nickel SilverCu64/Ni12/Zn24
8.67 -
Nickel/Beryllium/TitaniumNi97.5/Be 1.95/Ti 0.5
8.14 1195-1325
Nickel/BoronNi85/B 15
- 1065
Nickel/ChromiumNi80/Cr20
8.4 1400
Nickel/CopperNi70/Cu30
8.9 1300-1350
Nickel/Iron/MolybdenumNi80/Fe15.5/Mo 4.5
8.75 1454
Nickel/IronNi52/Fe48
8.4 1450
Nickel/IronNi80/Fe20
- 1445
Nickel/IronNi81/Fe19
8.68 1445
Nickel/ManganeseNi75/Mn25
- 1240
Nickel/ManganeseNi92/Mn 8
- 1420
Nickel/MolybdenumNi80/Mo20
- 1430
Nickel/MolybdenumNi84/Mo16
- 1445
Nickel/SiliconNi62/Si38
- 966
Nickel/TitaniumNi60/Ti40
- 1280
24
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Nickel/TitaniumNi70/Ti30
- 1200
Nickel/TitaniumNi90/Ti10
- 1340
Nickel/ZirconiumNi70/Zr30
- 1450
Niobium/TitaniumNb56/Ti44
- 2200
Niobium/ZirconiumNb99/Zr 1
8.59 2399
NitinolNi55/Ti45
6.5 1310
OFHC CopperOFHC
8.9 1083
Palladium/SilverPd75/Ag25
11.7 1250
Palladium/SilverPd77/Ag23
11.16 -
Permendur 491
Co49/Fe49/V 28.15 -
Phosphor BronzeCu94/Sn 6
8.9 900-1050
Platinum/IridiumPt70/Ir30
21.7 2153
Platinum/IridiumPt75/Ir25
21.7 1820-2133
Platinum/IridiumPt80/Ir20
21.7 1830-2123
Platinum/IridiumPt85/Ir15
21.6 2093
Platinum/IridiumPt90/Ir10
21.56 1800
Platinum/RhodiumPt60/Rh40
17.0 2226
Platinum/RhodiumPt70/Rh30
17.6 1920-1930
Platinum/RhodiumPt83/Rh17
19 -
Platinum/RhodiumPt87/Rh13
19.64 1840-1865
25
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Platinum/RhodiumPt90/Rh10
19.97 1830-1855
Platinum/RhodiumPt94/Rh 6
20.55 1825-1835
Platinum/TungstenPt92/W 8
21.3 1870 - 1910
Roses MetalBi50/Pb28/Sn22
9.85 95-110
Silver SteelFe98/C 1.1/Cr 0.4/Mn 0.3/Si0.2
7.80 -
Silver/CopperAg72/Cu28
9.96 779
Silver/PalladiumAg70/Pd30
10.90 1225
Stainless Steel - 15-7PHFe/Cr15/Ni 7/Mo 2.25
7.81 -
Stainless Steel - 17-4PHFe/Cr17/Ni 4
7.82 1400-1450
Stainless Steel - 17-7PHFe/Cr17/Ni 7
7.81 1435
Stainless Steel - AISI 301Fe/Cr17/Ni 7/C 0.1max
7.9 1400-1420
Stainless Steel - AISI 302Fe/Cr18/Ni 8
7.92 1400-1420
Stainless Steel - AISI 303Fe/Cr18/Ni 9/Mn/Si
8.03 1455
Stainless Steel - AISI 304Fe/Cr18/Ni10
7.93 1400-1455
Stainless Steel - AISI 310Fe/Cr25/Ni20
7.9 1400-1455
Stainless Steel - AISI 316Fe/Cr18/Ni10/Mo 3
7.96 1370-1400
Stainless Steel - AISI 321Fe/Cr18/Ni 9/Ti
7.9 1400-1425
Stainless Steel - AISI 347Fe/Cr18/Ni10/Nb
7.93 1400-1425
Stainless Steel - AISI 410Fe/Cr12.5
7.73 1480-1530
Stainless Steel - AISI 420Fe86.7/Cr13.0/C 0.3
7.8 1450
26
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Stainless Steel - DuplexFe/Cr22/Ni 5.5/Mo 3/N
7.8 1440
Sterling SilverAg92.5/Cu 7.5
10.4 788-891
T1 - Thermocouple AlloyNi90/Cr10
8.5 1420
T2 - Thermocouple AlloyNi95/(Al+Mn+Si) 5
8.5-8.7 1315-1390
Tantalum/TungstenTa90/W 10
16.9 3080
Tantalum/TungstenTa97.5/W 2.5
16.66 3014
Thoriated TungstenW 99/Th 1
19.298 -
Thoriated TungstenW 99.4/Th 0.6
19.3 -
Tin/AntimonySn95/Sb 5
7.26 232-240
Tin/Lead/AntimonySn60/Pb39/Sb 1
8.42 183
Tin/LeadSn50/Pb50
- 183-216
Tin/LeadSn60/Pb40
- 188
Tin/SilverSn96/Ag 4
7.39 221-246
Tinned CopperCuSn
8.92 1083
Titanium Alloy Beta 3Ti77.5/Mo12/Zr 6/Sn4.5
5.07 -
Titanium/Aluminum/VanadiumTi90/Al 6/V 4
4.42 1600-1650
Titanium/Aluminum/VanadiumTi94.5/Al 3/V 2.5
4.45 1700-1750
Titanium/AluminumTi65/Al35
- 1480
Titanium/AluminumTi78/Al22
- 1600
Titanium/AluminumTi88/Al12
- 1660
27
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Titanium/ChromiumTi80/Cr20
- 1560
Titanium/IronTi50/Fe50
- 1310
Titanium/Molybdenum/Niobium/Aluminum/SiliconTi78.8/Mo15/Nb 3/Al 3/Si 0.2
4.93 815-900
Titanium/MolybdenumTi84/Mo16
- 1900
Titanium/MolybdenumTi85/Mo15
- 1900
Titanium/SiliconTi92/Si 8
- 1330
Titanium/VanadiumTi90/V 10
- 1680
Tungsten/ChromiumW 90/Cr10
- 3100
Tungsten/CobaltW 50/Co50
14.1 -
Tungsten/CopperW 60/Cu40
13.0 -
Tungsten/CopperW 65/Cu35
14.9 -
Tungsten/CopperW 72/Cu28
14.4 -
Tungsten/CopperW 80/Cu20
15.4 -
Tungsten/Nickel/IronW 95/Ni 3.5/Fe 1.5
18.1 -
Tungsten/RheniumW 75/Re25
19.7 3100
Tungsten/RheniumW 95/Re 5
19.4 3350
Tungsten/RheniumW 97/Re 3
19.4 3325
Tungsten/TitaniumW 95/Ti 5
16.57 3300
Vanadium/ChromiumV 75/Cr25
- 1850
Waspaloy1 - Heat ResistingAlloyNi58/Cr19/Co14/Mo/Ti/Al/Fe
8.18 1340-1390
28
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Woods MetalBi50/Pb25/Cd12.5/Sn12.5
9.67 70
Zamak 410 - Zinc/Aluminum/Copper/MagnesiumZn95/Al 4/Cu 1/Mg
6.7 -
Zinc/AluminumZn50/Al50
- 560
Zinc/AluminumZn96/Al 4
6.7 379-388
Zinc/CopperZn95/Cu 5
- 500
Zinc/NickelZn90/Ni10
- 800
Zirconium/AluminumZr90/Al10
- 1440
Zirconium/NickelZr70/Ni30
- 1150
Zirconium/VanadiumZr56.5/V 43.5
- 1869
29
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Thermal Properties
Coefficient of thermalexpansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
Alloy 825Ni39.5/Fe32/Cr22/Mo 3/Cu 2/Ti
14.1 @20-200C - - 440 @23C - - 11.1 @23C
Aluchrom O1 - ResistanceAlloyFe70/Cr25/Al 5
11.0 @20-100C - 1250 - - - 16 @23C
Aluminium alloy 6061Al97.5/Mg 1/Si 0.6/Fe 0.5/Cu0.4
22.7-23.9 - 130-150 878-914 - - 152-169
Aluminum alloy 2011Al93/Cu 5.3/Fe 0.7/Si 0.4/Pb0.3/B
23 @20-100C - - - - - 138 @23C
Aluminum alloy 6082Al97.4/Si 1/Mg 0.9/Mn 0.7
24 @10-100C - - - - - 180 @23C
Aluminum alloy 7075Al90/Zn 5.5/Mg 2.5/Cu 1.5/Si0.5
24.4 @20-250C - - - - - 130 @20C
Aluminum alloy EN AC 42100Al 91.7/Si 7/Mg 0.3
21.5 @20-100C - - - - - 160 @20-100C
Aluminum/Lithium/CopperAl95/Li 2.5/Cu 1.5/Mg 1
21.4 @20-100C - - 930 @23C - - 93.5 @C
Aluminum/Magnesium/Manganese/ChromiumAl96.45/Mg 2.6/Mn 0.8/Cr0.15
23.6 @20-100C - - - - - 135 @23C
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 0.6
23.0 @20-100C - - 904 @23C - - 180-193 @23C
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 1
23.0 @20-100C - - - - - 180-195 @23C
Aluminum/Magnesium/SiliconAl99/Mg 0.5/Si 0.5
23.4 @20-100C - - 960 @23C - - 209 @23C
Aluminum/MagnesiumAl95/Mg 5
23.0-23.5 @20-100C - - - - - 125-130 @23C
Aluminum/MagnesiumAl97/Mg 3
23.5 @20-100C - - - - - 135-160 @23C
Aluminum/MagnesiumAl97.5/Mg 2.5
23.7 @20-100C - - 880 @23C - - 138 @23C
30
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Thermal PropertiesCoefficient of thermal
expansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
Aluminum/Silicon/Magnesium/ManganeseAl97.5/Si 1.0/Mg 0.8/Mn 0.7
24 @20-100C - - 894 @23C - - 180 @23C
Aluminum/SiliconAl88/Si12
20.4 @20-100C - - - - - 121 @23C
Aluminum/TitaniumAl75/Ti25 (Atomic %)
21 @20-100C - - - - - 115 @23C
Antimonial LeadPb96/Sb 4
27.8 @20-100C - - - - - 30.5 @23C
Bismuth/LeadBi55.5/Pb44.5
- - - 155 @23C - - 4 @85C
BrassCu63/Zn37
19.0-20.5 @20-100C - - - - - 125 @23C
BrassCu70/Zn30
19.0-20.0 @20-100C - - - - - 109-121 @23C
BronzeCu89/Sn11
17.0 @20-100C - - - - - 42-50 @23C
Chromaloy O1 - ResistanceAlloyFe75/Cr20/Al 5
11 @20-100C - 1250 - - - 16 @23C
Cobalt/Chromium/Iron/Nickel/Molybdenum/ManganeseCo40/Cr20/Fe15/Ni15/Mo 7/Mn 2/C/Be
12.5 @0-100C - - 430 @20C - - 12.5 @20C
Cobalt/Chromium/Tungsten/Nickel/Iron/ManganeseCo50/Cr20/W 15/Ni10/Fe 3/Mn 2
12.6 @25-100C - - - - - 9.4 @23C
Constantan - ResistanceAlloyCu55/Ni45
14.9 @20-100C - 500 - - - 19.5 @23C
Copper/BerylliumCu98/Be 2
17.0 @25-300C - - - - - 60-120 @23C
Copper/Chromium/ZirconiumCu98.9/Cr 1.0/Zr 0.1
- - - - - - 320 @23C
Copper/NickelCu70/Ni30
16.2 @20-300C - - 377 @23C - - 29.4
Copper/TelluriumCu99.5/Te 0.5
- - 350 - - - -
31
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Thermal PropertiesCoefficient of thermal
expansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
Dural1 - Aluminum/Copper/MagnesiumAl95/Cu 4/Mg 1
22.5 @20-100C - - - - - 147 @23C
Evanohm1 - PrecisionResistance AlloyNi75/Cr20/Al 2.5/Cu 2.5
11.7 @20-100C - 300 435 @23C - - 14.6 @23C
Fecralloy1 - Iron/ChromiumFe72.8/Cr22/Al 5/Y 0.1/Zr 0.1
11.1 @20-100C - 1100-1300 - - - 16 @23C
Gallium/Indium/TinGa68.5/In21.5/Sn10
- - - - - - 55
Gilding MetalCu85/Zn15
18.7 @25-300C - - - - - 159 @23C
Glass Sealing AlloyFe54/Ni29/Co17
4.81 @20-200C - - 439 @23C - - 17.3 @23C
Gold/Germanium EutecticAu88/Ge12
13 @20-100C - - - - - 44 @23C
Gold/NickelAu82/Ni18
14.0 @20-700C - - - - - 49 @23C
Gold/TinAu80/Sn20
16 @20-100C - - - - - 57 @23C
Hastelloy1 B - CorrosionResistant AlloyNi62/Mo28/Fe 5/Cr/Mn/Si
10.3 @20-100C - 760 - - - 11.1 @23C
Hastelloy1 B-2Ni68/Mo28/Fe 2/Cr 1/Co 1
10.3 @20-100C - - - - - -
Hastelloy1 B-3Ni65/Mo28.5/Cr 1.5/Fe 1.5/(Co+ Mn + W ) 3.5max
10.6 @20-100C - 400 - - - 11.2 @23C
Hastelloy1 C276 - HeatResisting AlloyNi57/Mo17/Cr16/Fe/W/Mn
10.8-11.3 @20-100C - 1090 427 @23C - - 10.1-12.5 @23C
Hastelloy1 XNi49.5/Cr22/Fe18/Mo 9/Co 1/W
13.0 @25-100C - - 486 @23C - - 9.1 @23C
Havar1 - High-Strength Non-Magnetic AlloyCo42.5/Cr20/Ni13/Fe/W/Mo/Mn
12.5 @0-50C - - - - - 13.0 @23C
Haynes1 230 alloyNi62/Cr22/W 14/Mo 2
13 @25-200C - - 397 @23C - - 8.9 @23C
High Permeability MagneticAlloyNi80/Fe15/Mo 5
- - - 455 @23C - - 19 @23C
32
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Thermal PropertiesCoefficient of thermal
expansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
Incoloy1 alloy 800 - HeatResisting AlloyNi32.5/Cr21/Fe
14.2-15.8 @20-100C - - 460 @23C - - 11.5-12.9 @23C
Inconel 6251 - CorrosionResistant AlloyNi61/Cr22/Mo 9/Fe 5
12.8 @20-100C - - 410 @23C - - 9.8 @23C
Inconel1 617Ni57/Cr22/Co12/Mo 9
11.6 @20-200C - - 419 @23C - - 13.4 @23C
Inconel1 alloy 600 - HeatResisting AlloyNi72/Cr16/Fe 8
11.5-13.3 @20-100C - - 444 @23C - - 14.8 @23C
Inconel1 alloy 718 - HeatResisting AlloyNi53/Fe19/Cr19/Nb/Mo/Ti
13.0 @20-100C - 700 435 @23C - - 11.2 @23C
Inconel1 X750 - HeatResisting AlloyNi74/Cr15/Fe 7/Ti/Al/Nb
12.6 @20-100C - - 431 @23C - - 12.0 @23C
Indium/SilverIn97/Ag 3
22 @20-100C - - - - - 73 @23C
Indium/TinIn50/Sn50
20 @20-100C - - - - - 34 @23C
Invar1 - Controlled ExpansionAlloyFe64/Ni36
1.7-2.0 @20-90C - - 515 @23C - - 13 @23C
Iron/Chromium/MolybdenumFe90/Cr 9/Mo 1
11.3 @25-100C - - - - - 26.0 @23C
Iron/NickelFe50/Ni50
9.9 @25-450C - - 502 @23C - - 14 @23C
Iron/NickelFe52/Ni48
8.5 @20-100C - 450 502 @23C - - 16.7 @23C
Iron/NickelFe55/Ni45
7 @20-100C - - 460 @23C - - 13 @23C
Iron/NickelFe58/Ni42
4.8 @30-100C - - 502 @23C - - -
Leaded BrassCu58/Zn39/Pb 3
20.9 @20-100C - - 380 @23C - - 123 @23C
Magnesium alloy AZ31Mg96/Al 3/Zn 1
26 @20-100C - - 1001 - - 96
Magnesium Alloy AZ61Mg93/Al 6/Zn 1
26 @20-100C - - 1050 @23C - - 79.5 @0C
Magnetic Shape MemoryAlloyNi50/Mn28/Ga22 (Atomic %)
20 1090 45 - 50 45 16
33
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Thermal PropertiesCoefficient of thermal
expansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
Magnetic Shielding AlloyNi77/Fe14/Cu 5/Mo 4
13.0 @20-100C - - - - - 30-35 @23C
Manganin1 - Resistance AlloyCu86/Mn12/Ni 2
14-19 @20-100C - 300 - - - 22 @23C
Molybdenum HighTemperature Alloy TZMMo99/Ti 0.5/Zr 0.1
5.3 @20-100C - 400 305 @23C - - 126 @23C
Monel1 alloy 400Ni65/Cu33/Fe 2
13.9-14.1 @20-100C - 450 - - - 21.7 @23C
Monel1 alloy K-500Ni63/Cu30/Al3/Fe2/Mn1.5/Ti0.5
8 @20-150C - - 419 @23C - - 17 @23C
Neodymium/Iron/BoronNd2Fe14
B5.2 @20-100C - - - - - 9 @23C
Nickel Silver (18)Cu65/Ni18/Zn17
16.2 @20-300C - - 380 @23C - - -
Nickel SilverCu62/Ni18/Zn20
16.0-17.1 @25-300C - - - - - 28 @23C
Nickel SilverCu64/Ni12/Zn24
16 @20-200C - - - - - 42 @23C
Nickel/Beryllium/TitaniumNi97.5/Be 1.95/Ti 0.5
14 @20-200C - - - - - 48 @23C
Nickel/ChromiumNi80/Cr20
14 @20-100C - 1150-1250 - - - 13.4 @23C
Nickel/CopperNi70/Cu30
13.6-14.0 @20-100C - - 420 @23C - - 26 @23C
Nickel/IronNi52/Fe48
8.5 @20-100C - - 450 @23C - - 16.7 @23C
Nickel/IronNi80/Fe20
12.9 @20-100C - - - - - 34.6 @23C
OFHC CopperOFHC
16.8 @25-100C - 750-950 - - - 395 @23C
Permendur 491
Co49/Fe49/V 29.5 @20C - - - - - -
Phosphor BronzeCu94/Sn 6
17.0 @20-100C - - - - - 50-75 @23C
Platinum/IridiumPt70/Ir30
8.6 @20-100C - - - - - -
Platinum/IridiumPt80/Ir20
8.3 @0-100C - - - - - -
Platinum/IridiumPt90/Ir10
8.7 @20-100C - - - - - 31 @23C
34
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Thermal PropertiesCoefficient of thermal
expansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
Platinum/RhodiumPt60/Rh40
- - 1700 - - - -
Platinum/RhodiumPt90/Rh10
- - - - - - 38 @23C
Silver SteelFe98/C 1.1/Cr 0.4/Mn 0.3/Si0.2
- - - - - - 32.0 @20C
Stainless Steel - 15-7PHFe/Cr15/Ni 7/Mo 2.25
14.4 @20-90C - - - - - -
Stainless Steel - 17-4PHFe/Cr17/Ni 4
11.9 @21-93C - - - - - 14.9 @23C
Stainless Steel - 17-7PHFe/Cr17/Ni 7
15.3 @20-90C - - - - - 16.7 @23C
Stainless Steel - AISI 301Fe/Cr17/Ni 7/C 0.1max
18.0 @20-100C - - - - - 16.3 @23C
Stainless Steel - AISI 302Fe/Cr18/Ni 8
15-18 @20-100C - - - - - 16.3 @23C
Stainless Steel - AISI 303Fe/Cr18/Ni 9/Mn/Si
17.3 @20-200C - - - - - 16.3 @100C
Stainless Steel - AISI 304LFe/Cr18/Ni10
17.3 @23C - - - - - 16.2 @23C
Stainless Steel - AISI 304Fe/Cr18/Ni10
18.0 @20-100C - - - - - 16.3 @23C
Stainless Steel - AISI 310Fe/Cr25/Ni20
16-18 @20-100C - - - - - 16.3 @23C
Stainless Steel - AISI 316Fe/Cr18/Ni10/Mo 3
16-18 @20-100C - - 502 @23C - - 16.3 @23C
Stainless Steel - AISI 321Fe/Cr18/Ni 9/Ti
18.0 @20-100C - 800 - - - 16.3 @23C
Stainless Steel - AISI 347Fe/Cr18/Ni10/Nb
16-18 @20-100C - 800 - - - 16.3 @100C
Stainless Steel - AISI 410Fe/Cr12.5
10-12 @20-100C - 750 - - - 18-24 @23C
Stainless Steel - AISI 420Fe86.7/Cr13.0/C 0.3
10.3 @0-100C - - 460 @23C - - 24.9 @100C
Stainless Steel - DuplexFe/Cr22/Ni 5.5/Mo 3/N
13.7 @20-100C - - 500 @23C - - 19.0 @23C
Sterling SilverAg92.5/Cu 7.5
19 @20-100C - - 245 @23C - - -
T1 - Thermocouple AlloyNi90/Cr10
17.2 @20-1000C - 1100 - - - 19 @23C
35
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Alloy - Thermal PropertiesCoefficient of thermal
expansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
T2 - Thermocouple AlloyNi95/(Al+Mn+Si) 5
16.8 @20-1000C - 1100 446 @23C - - 30-32 @23C
Tantalum/TungstenTa97.5/W 2.5
6.48 @20-500C - - 141 @23C - - 55 @23C
Thoriated TungstenW 99/Th 1
- - - 146 @23C - - -
Tin/Lead/AntimonySn60/Pb39/Sb 1
24.0 @15-110C - - - - - 50.2 @23C
Tinned CopperCuSn
16.9 @20-100C - - - - - 391.1 @C
Titanium/Aluminum/VanadiumTi90/Al 6/V 4
8.0 @20-100C - - - - - 5.8 @23C
Titanium/Aluminum/VanadiumTi94.5/Al 3/V 2.5
9.66 @20-200C - - - - - 7.6 @23C
Titanium/Molybdenum/Niobium/Aluminum/SiliconTi78.8/Mo15/Nb 3/Al 3/Si 0.2
7.07 @20-100C - - 490 @23C - - 7.60 @23C
Tungsten/CopperW 60/Cu40
11.7 @20C - - 240 @25C - - 228 @23C
Tungsten/CopperW 72/Cu28
10.2 @20C - - 210 @25C - - 220 @23C
Tungsten/CopperW 80/Cu20
- - - - - - 145 @23C
Tungsten/RheniumW 75/Re25
4.48 @0-500C - - - - - -
Tungsten/RheniumW 97/Re 3
2.9 @20-100C - - - - - -
Waspaloy1 - Heat ResistingAlloyNi58/Cr19/Co14/Mo/Ti/Al/Fe
11.7 @20-100C - - - - - 10.7 @23C
36
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
top related