1. TALAT Lecture 1401 Aluminium Powder Metallurgy26 pages, 25 figuresAdvanced Level 1 prepared by B. Verlinden, University of LeuvenL. Froyen, University of Leuven, Belgium…
IJSRD - International Journal for Scientific Research & Development| Vol. 1, Issue 4, 2013 | ISSN (online): 2321-0613 All rights reserved by www.ijsrd.com 806 Parametric…
International Journal of Recent Research in Civil and Mechanical Engineering (IJRRCME) Vol. 1, Issue 1, pp: (1-11), Month: April 2014 - September 2014, Available at: www.paperpublications.org…
International Journal of Science and Engineering Applications Volume 4 Issue 2, 2015, ISSN-2319-7560 (Online) www.ijsea.com 1 Influence of Titanium Oxide on Creep Behavior,…
Wear 271 (2011) 2766–2774 Contents lists available at ScienceDirect Wear j our nal homepage: www. el sevi er . com/ l ocat e/ wear AbrasivewearbehaviourofSiCp/Alalloycompositeincomparisonwith…
Macro- and Micromechanical and Tribological Properties 229 229 6 Macro- and Micromechanical and Tribological Properties Bharat Bhushan and Bal K. Gupta 1.0 INTRODUCTION Mechanical…
Aluminum-Carbon Metal Matrix Composites: Effect of Carbon Fiber and Aspect Ratio on the Mechanical Properties Harri Junaedi1, a, Hany S. Abdo1,b, Khalil A. Khalil1,c and…
VISVESVARAYA TECHNOLOGICAL UNIVERSITY “Jnana Sangama”, Belgaum-590018 A PROJECT REPORT ON “EXPERIMENTAL DETERMINATION AND ANALYSIS OF FRACTURE TOUGHNESS OF MMC” Submitted…
INTERNATIONAL JOURNAL OF RESEARCH IN AERONAUTICAL AND MECHANICAL ENGINEERING Vol.1 Issue.6, October 2013. Pgs: 23-41 Pradeep, Mr.Punit Katyal, Dr.Vishal Gulati 23 ISSN (ONLINE):…