Descriptive Geometry 2 By Pál Ledneczki Ph.D. Table of contents 1. 2. 3. 4. 5. 6. 7. 8. 9. Intersection of cone and plane Perspective image of circle Tangent planes and…

CAD/CAM Principles and Applications Ch 4 Geometric Modelling CAD/CAM Principles and Applications by P N Rao, 2nd Ed 1 Objectives • • • • • • • • Understand…

CAM Computer Aided Manufacturing spectraCAM Milling Teacher’s Guide CAM Computer Aided Manufacturing spectraCAM Milling Teacher’s Guide © 1997 Light Machines Corporation…

www.mastercam.webs.com and cokhitruong.webs.com [email protected] TRAINING GUIDE MILL-LESSON-13 ru o ROUGH PLUNGE, FINISH CONTOUR & FINISH SHALLOW TOOLPATHS www.mastercam.webs.com…

CAD/CAM Principles and Applications Ch 4 Geometric Modelling CAD/CAM Principles and Applications by P N Rao, 2nd Ed 1 Objectives • • • • • • • • Understand…

AutoCAD® 2010 Tutorial Second Level: 3D Modeling Oregon Institute of Technology Randy H. Shih PUBLICATIONS SDC Schroff Development Corporation www.schroff.com Better Textbooks.…

1. AutoCAD® 2007 Tutorial Second Level: 3D Modeling Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com…

Angle Trisection Angle trisection is the division of an arbitrary angle into three equal angles. It was one of the three geometric problems of antiquity for which solutions…

CAD/CAM Principles and Applications Ch 4 Geometric Modelling CAD/CAM Principles and Applications by P N Rao, 2nd Ed 1 Objectives • • • • • • • • Understand…

Slide 1 Three-dimensional shapes Slide 2 Hyperboloid of one sheet Slide 3 In the real world... Slide 4 Paraboloid Slide 5 In the real world... Slide 6 What 3D shape is this?…