STAAD.Pro Tips and Tricks Carlos Aguera 24th May 2011 Agenda • The following are the topics to be covered in this workshop of STAAD.Pro Tips and Tricks • 1) Macros and…
1. Chapter 21Electromagnetism 2. At the end of the chapter,you should be able to Describe experiments to show the force ona current-carrying conductor, and on abeam of…
STAAD.Pro Tips and Tricks Carlos Aguera 24th May 2011 Agenda • The following are the topics to be covered in this workshop of STAAD.Pro Tips and Tricks • 1) Macros and…
1. Good Mafternoon! 4/25/14 EQ: Who are the aborigines and what did they do? HW: None :) *Reminder: GA OAS by 4-28 SPONGE Based on what you have learned so far, make a prediction…
UNIVERSITY OF CAPE TOWN DEPARTMENT OF ELECTRICAL ENGINEERING EEE3055F 2012 Module A: Electromagnetic Field Theory Lecture Notes: Version 2.33 2012 Lecturer: Assoc. Prof.…
Unit 2 Physics: Kinamatics: M J Rhoades Kinematics (from Greek κινεῖν, kinein, to move) is the branch of classical mechanics that describes the motion of bodies…
Profile Machining Operation A 2.5D Profile machining operation is typically used to cut out shapes. Other uses include facing edges and with increased cut widths can be used…
1. Good Morning! 1/10/12Good Morning! 1/10/12 Good Morning/Afternoon!Good Morning/Afternoon! EQ: Who are the Aborigines and what did they do? HW: None Sponge Based on what…
CHAPTER 3 GYROS LEARNING OBJECTIVES Upon completion of this chapter you should be able to: 1. Describe the characteristics of a gyroscopes. 2. List the two basic properties…