Aircraft Intake Aerodynamics Revised 4/22/2014 13:37:00 Divas Gupta1 Arjun Agrawal2 Prabhat Kumar3 1Department of Mechanical Engineering, Indian Institute of Technology,…

Slide 1 Subject: Heat Transfer Name: Hafiz Luqman Khalil Roll No: 11053123-032 Topic: DIMENSIONLESS NUMBERS These are defined as those numbers which have no dimensions. These…

1. AHEMD BODY COMPARING TWO MESHING METHODS Nabeel Fathi AUTOMOTIVE AERODYNAMIC PROBLEM 2. Problem Description • The Ahmed body is widely used in the automotive aerodynamic…

1. Internal Flow 1 Chapter 8 Convection: Internal Flow (8.1-8.6) 2. Internal Flow 2 Introduction In Chapter 7 we obtained a non-dimensional form for the heat transfer coefficient,…

1. PROJECTS PORTFOLIO Computer Aided Designing 2.  ‘Developed an Aerodynamic Design for a Solar Powered Car’  The project was accomplished individually over a period…

1. TWO PHASE FLOW BOILING IN SMALL CHANNELS Presented by :- Ashutosh kushwaha 2. CONTENTS  Introduction  Classification  Pool Boiling  Boiling Curve  Correlations…

Project Report Contents Acknowledgement 2 Abstract 2 Introduction 3 Background 4 Problem Statement 4 Literature Review 5 Methodology 7 Experimental Setup Apparatus and Materials…

7-1 Chapter 7 EXTERNAL FORCED CONVECTION Drag Force and Heat Transfer in External Flow 7-1C The velocity of the fluid relative to the immersed solid body sufficiently far…

© 2012 ANSYS, Inc. September 19, 2013 1 Release 14.5 PRACE Autumn School 2013 - Industry Oriented HPC Simulations, September 21-27, University of Ljubljana, Faculty of Mechanical…

Autodesk® Flow Design Rev 01072014 Flow Design Preliminary Validation Brief Flow Design Preliminary Validation Brief Autodesk [and other products] are registered trademarks…