ZW3D 2013 SP

7/22/2019 ZW3D 2013 SP

1/25

Update List of ZW3D 2013 SP

August.12.2013.

7/22/2019 ZW3D 2013 SP

2/25

Content

Update List of ZW3D 2013 SP ............................................................................................................................... 1

1 Basic Function .................................................................................................................................................... 1

1.1 ZW3D 64bit version ............................................................................................................................... 1

1.2 File management..................................................................................................................................... 2

1.3 New pick feature..................................................................................................................................... 2

1.4 Improved Print ........................................................................................................................................ 2

1.5 Other Improvements ............................................................................................................................... 2

2 Translator ....................................................................................................................................................... 4

2.1 Simplified workflow .............................................................................................................................. 4

2.2 New loop projection logic to improve import quality .......................................................................... 4

2.3 Adjusted the UV space of small faces ................................................................................................... 4 2.4 Optimized Parasolid ............................................................................................................................... 5

2.5 Improved STEP ...................................................................................................................................... 5

2.6 Improved DWG &PDF .......................................................................................................................... 6

2.7 Updated Translator(TransMagicR10SP01) ........................................................................................... 7

3 Modeling ....................................................................................................................................................... 8

3.1 History Manager ..................................................................................................................................... 8

3.2 Sketch ...................................................................................................................................................... 8

3.3 Part Design .............................................................................................................................................. 9

3.4 Sheet Metal ........................................................................................................................................... 11

3.5 Assembly ............................................................................................................................................... 12

3.6 Point Cloud ........................................................................................................................................... 12

3.7 Updated PartSolution(PartSolution9.05) ............................................................................................ 13

4 Drafting ........................................................................................................................................................ 14

4.1 Make sure primitive edges projected as primitive in Drafting .......................................................... 14

4.2 Projection correctness improvement ................................................................................................... 14

4.3 Smarter broken section boundaries ..................................................................................................... 15

4.4 Improved table functions ..................................................................................................................... 15

4.5 More tools in Toolbar > DimTool........................................................................................................ 16

4.6 Other Improvements ............................................................................................................................. 165 Mold ............................................................................................................................................................. 17

5.1 Electrode ............................................................................................................................................... 17

5.2 Optimized features................................................................................................................................ 17

5.3 Fixed Problems ..................................................................................................................................... 18

6 CAM ............................................................................................................................................................. 19

6.1 CAM Manager ...................................................................................................................................... 19

6.2 Functionality Improvements ................................................................................................................ 19

7/22/2019 ZW3D 2013 SP

3/25

1

Update List of ZW3D 2013 SP

Some significant new features are added in ZW3D 2013 SP. And more than 200 problems are fixed.

Following are highlights of this new version:

New ZW3D 64bit version Updated Translator Simplified import & export workflow Much-improved data exchange New Pick from Listcommand to help to select obscured objects. Modeling improvements, including Loft, Wrap, and Rib feature pattern, and so on. Drafting improvements, especially the accuracy of the projection. New and improved CAM features: New Nesting operation, Trapezoid thread type, Run-out extended

tool path, improved minimum tool-length calculation, and so on.

1 Basic Function

1.1 ZW3D 64bit version

ZW3D 2013 x64(64-bit) is coming. Install the ZW3D x64 on the computer running 64-bit operation system

to maximize the performances.

64-bit operating systems can handle large amounts of memorytypically 4GB of random access memory

(RAM) or more efficiently than 32-bit operating systems.

The speed of reading data is faster. Modeling, assembly and tool-path calculation are more efficient.

(Note: The previous version (< 2013 SP) cantread the Z3 file saved in ZW3D 2013 SP x64.)

7/22/2019 ZW3D 2013 SP

4/25

2

1.2 File management

1) Made sure that the symbols of the diameter, degree and arc length will be display correctly in

multi-language version.

2) Moved New Assembly Modeinto Configurationform.

3) Sendsupports compressing.

1.3 New pick feature

New Pick from Listfunction to help users to select obscured objects. It is available from the right menu.

Features are list in the type.

Turn on Direct Edit option, feature objects are excluded in the list. The part in the sub-assembly can be selected.

1.4 Improved Print

1) New display effects of Print/Plot through OSR (Off screen rendering).

2) Fixed the lost objects of plot preview.

3) Fixed the sheet background box to not be printed.

1.5 Other Improvements

1) More commands support to be operated transparently.All the inquire commands and show/hide commands can be operated when doing other operations.

2) Analyze facesand Continuity errorcommands are available in Lite version.

7/22/2019 ZW3D 2013 SP

5/25

3

3) Fixed some crash problems to continue to improve stability.Fixed the crash error of creating break section view on part with Do not section

Fixed the crash error when opening a file such as .jpg or .bmpFixed the crash during echo in Drag command caused by array index overflowFixed the crash when emboss with a resolution of 0.01Fixed a crash during feature renaming

4) Improved compatibility with low-end Intel graphic cards.5) Add a new Performance Optionin Visual Manager.6) Restored the display of the edge with individual attribute under wireframe.7) The freeze color of out-of-scope parts can inherit their original color.8) Fixed the lost layer display info of customized view.9) New Customoption of color widget of Face Attributecommand.10) Fixed the residual highlight after canceling Entity Info.

7/22/2019 ZW3D 2013 SP

6/25

4

2Translator2.1 Simplified workflow

Simplified workflow is fit for usershabit and easier to transfer different formats during import or export

files.

2.2 New loop projection logic to improve import quality

This new loop projection logic helps to decrease open edges of imported models. Test result shows that

more than 30% models get better quality.

Take a parasolid file for example, see the image below.In ZW3D 2012 SP2, there are more than 80 open edges and some reversed surfaces. In ZW3D 2013 SP,

there are only 14 open edges and no reversed surface.

ZW3D 2012 SP2 ZW3D 2013 SP

2.3 Adjusted the UV space of small faces

This improvement not only improves the display of imported model, but also reduces the number of

reversed surface.

7/22/2019 ZW3D 2013 SP

7/25

5

ZW3D 2012 SP2 ZW3D 2013 SP

2.4 Optimized Parasolid

1) Update parasolid format to V25.1.

2) Made sure that primitive entities are imported or exported as primitive for Parasolid format.

Based on this improvement, many imported problems are fixed to obtain better model quality.

Origin ZW3D 2013 ZW3D 2013 SP

2.5 Improved STEP

1) Fixed the import issue of the torus primitive surface with MinR>MaxR.

7/22/2019 ZW3D 2013 SP

8/25

6

ZW3D 2013 ZW3D 2013 SP

2) Fixed the component misplacing of the step import.

ZW3D 2013 ZW3D 2013 SP

3) Fixed the index duplication error when exporting an assembly with components instancing from

different files.

4) Fixed the shape duplication on the import of a specific step file.

5) Fixed the display abnormal after importing a specific file.

2.6 Improved DWG &PDF

1) Fixed the location shift error of the Title Block after DWG export.

Origin ZW3D 2013 ZW3D 2013 SP

7/22/2019 ZW3D 2013 SP

9/25

7

2) Fixed the lost lines in drafting after exporting into PDF.

ZW3D 2013 ZW3D 2013 SP

2.7 Updated Translator(TransMagicR10SP01)

ZW3D 2013 SP supports TransMagic10, TransMagic9 and TransMagic8.

ZW3D 2013 & 2012 just support TransMagic9 and TransMagic8.

New format version:

Format Version

CATIA V6 new!

CATIA V5 Up to R23

CATIA V4 Up to V4.24

Unigraphics Up to NX 8.5

Solidworks Up to Solidworks 2013

Core Elements/ProE Up to Core 2.0

Inventor Up to V2013

Parasolid Up to V25

SAT R2 to R23

Webpackage (32bit):http://download.zwsoft.com/zw3d/OptionalModule/TransMagicR10sp01.exe

Webpackage (64bit):http://download.zwsoft.com/zw3d/OptionalModule/TransMagicR10sp01_x64.exe

7/22/2019 ZW3D 2013 SP

10/25

8

3Modeling3.1 History Manager

1) Color auto-suppressed features in red to distinguish from the manual-suppressed features.

2) Many problems are fixed.

Fixed the Redofailure because of failed "Redefine Last". Fixed the lost history operation of Dimple, Louverand Stockwhen canceling the redefinition. Restored the auto-regen mark of sub-part. Made sure that the entity name remains unchanged after Hide and Show operation. Made regeneration of references to edges on open faces more robust. Improved tracing of parent/child features dependent on assembly components.

3.2 Sketch

1) Allow a sketch to directly reference geometry from any component in parent.

2) Fixed the lost highlight of sketch origin point.

3) Improved the perpendicular constraint between line and curve.

4) Made Tangent Pickto support direct external reference.

5) Fixed the incorrect association between Dimension Toggleand the options of Sketch Setting.

7/22/2019 ZW3D 2013 SP

11/25

9

3.3 Part Design

3.3.1 Loft feature support point as profile

Points can work as the profile of loft feature. And there are three new different types: Start Point and

Profiles, End Point and Profiles, Both End Points and Profiles.

Start Point and Profiles End Point and Profiles Both End Points and Profiles

3.3.2 Updated Wrap shape along curveand Pattern shape along curve

More functionality is provided, including the following points:

New option---Start point

New option---Reverse curve direction. Updated option---Move/Pattern shape rigidly

Move shape rigidly Wrap but preserve shape Wrap and bend along curve

The second option, "Wrap but

preserve shape" is a new method

that rigidly moves the shape to

the curve and then wraps to the

face with minimal distortion. This

option is appropriate if you are

wrapping several small

decorations along a curve.

The default value "Wrap and

bend along curve" gives the old

answer and is the appropriate

option if you are bending a

cylinder along the curve.

7/22/2019 ZW3D 2013 SP

12/25

10

New option---Stretch stretch (or compress the shapes) along the length of the curveWrap and bend along curve

-50 0 50

3.3.3 Improved the result of patterning the Rib feature

Origin ZW3D 2013 ZW3D 2013 SP1

3.3.5 Other Improvements

1) Fixed wrap failure when the geometry went off of the edge of a quilt of faces had primitive planes.

2) New Extensionoption in Divideand Trimcommands.

3) Upgraded External Copyto support history extraction.

4) Fixed the wrong shape generated by Inlayfrom a text crossing the surface seam.

5) Made sure the shape generated on a self-x profile by Inlayis close.

6) Improved Merge Faceto cover more cases.

7) Fixed face color propagation of Divide.

8) Fixed the wrong profile orientation when Extrude, Revolveand Sweepworked on a one-line

profile, and made them to support 0 offset.

9) Fixed some bugs related Direct Edit.

10) Fixed some wrap failure cases.

11) Fixed Unfold to a planeto work on a face with pole.

12) Fixed a failure of Combineon a specific model.

7/22/2019 ZW3D 2013 SP

13/25

11

13) Fixed the wrong shape generated by Inlayfrom text crossing a surface seam.

ZW3D 2013 ZW3D 2013 SP1

14) Made sure that Vertex Chamferworks with big setback value.

15) Made sure the cylinder face required to extend to cap the fillet is extended as a cylinder.

ZW3D 2013 ZW3D 2013 SP1

3.4 Sheet Metal

1) Fixed the wrong shape of refolding a sheet metal which was partially cut its flanges on unfold status.

Unfold ZW3D 2013 Refold ZW3D 2013 SP Refold

2) Fixed the reversed face on a flange which happened when refolding a unfolded sheet .

3) Fixed the persistent label conflict of Louverand Dimplecommands.

4) Made sure the shape generated by Louverwas closed.

7/22/2019 ZW3D 2013 SP

14/25

12

3.5 Assembly

1) Fixed the Open Partcommand to open component in a new window.

2) Edit Partcommand can use the window of the part if it is already open.

3) New AnimationRibbon under Animation context, and right-click menu is supported on blank area of

animation manager.

4) Fixed the error of Undoan operation of opening an external part within assembly manager.

5) Fixed the errors on Rename Componentand Rename Part.

6) Made sure the graphic view won't change when using "Move/Rotate/Drag" in animation context.

3.6 Point Cloud

Optimized surface from points command

1) New fit methods --- Max iterationor Fit toleranceare provided. According to these parameters tocontrol fitting shape. When one target is reached, fitting is finish.

2) New options--Free/Fixed bounds are available when reference face is assigned.

7/22/2019 ZW3D 2013 SP

15/25

13

3.7 Updated PartSolution(PartSolution9.05)

ZW3D 2013 SP supports PartSolution9.05 or above.

Web package of PartSolution English version:

http://download.zwsoft.com/zw3d/OptionalModule/PARTsolutionsEngWeb_9.05.exe

7/22/2019 ZW3D 2013 SP

16/25

14

4Drafting4.1 Make sure primitive edges projected as primitive in

Drafting

This optimization greatly improves the quality of 2D drawing, especially for imported models.

ZW3D 2013 ZW3D 2013 SP

4.2 Projection correctness improvement

1) Fixed the missing silhouette lines on view projection of a specific model.

ZW3D 2013 ZW3D 2013 SP

2) Fixed the hidden line misclassification or loss on view projection.ZW3D 2013 ZW3D 2013 SP

7/22/2019 ZW3D 2013 SP

17/25

15

4.3 Smarter broken section boundaries

This project makes broken sections smarter about their boundaries by creating boundary curves over a

face only if the face is closer to the eye than the section plane.

ZW3D 2013 ZW3D 2013 SP

4.4 Improved table functions

1) New User-definedoption in Hole Tablecommand to support picking non-hole-feature geometries

to dimension as holes.

Check this box to select curves for user-defined holes that are concentric with 3D hole features.Checking or unchecking this box does not affect holes that you have already selected for the

hole table.

When this box is not checked, curves cannot be selected as user-defined holes if they have thesame center as a hole feature, regardless of whether the hole feature is eligible for picking.

ZW3D 2012 SP2 ZW3D 2013 SP

2) Fixed the hole table creation failure on a view which was projected from a part of an external file.

3) Made sure that the values of variables could be exported together with the table.

7/22/2019 ZW3D 2013 SP

18/25

16

4.5 More tools in Toolbar > DimTool

ZW3D 2013:

ZW3D 2013 SP:

More useful and easier dimension tools are provided. They can speed up the dimension mark or

modification.

4.6 Other Improvements

1) New drafting template filter

2) Fixed the lagged refresh of Hide Componentcommand.

3) Made sure original point of the grid in the drawing sheet always be coincide with the origin point of the

sheet.

4) Restored the Disassociate function of Associate/Disassociatecommand.

7/22/2019 ZW3D 2013 SP

19/25

17

5Mold5.1 Electrode

1) Support specify the color for electrode area in the model to make a mark.

2) Provide a new option to allow designers to save each electrode to individual layer.

3) Add the electrode assembled table for auto batch electrode drawing sheet.

4) Support per electrode table for per electrode.

5) The position of sparking draw could be customized.

5.2 Optimized features

1) Add the commands to create Sleeve, Sleeve Component, Eject Guide Pin, Support Pillar Component,

Pull Blot.

7/22/2019 ZW3D 2013 SP

20/25

18

2) Add the option to keep the trimmed surface after trim command.

3) Improve the interactive of Runner and Gate commands.

4) Non-structure Component (such as Runner, Gate) can be hided in BOM automatically.

5) Dont automatically create the section view for standard components which are cylinder shape.

6) Prevented the pocket from appearing when inserting a pin in a Slider.

5.3 Fixed Problems

1) Fixed a ejector pin bug-- when users do not pocket in core/cavity, it will fail to insert ejector pin.

2) Fixed a problem ---It couldnt be successful to insert screws in the part which is not top assembly.

3) Fixed redefine MoldBase failure.

4) Fixed failure of Runner insertion (Parabolic or T) with Project Curve.

5) Fixed error in Pocket command after using Erase.

6) Fixed error in Insert ejector pin when users do not pocket in core/cavity.

7) Fixed error that the assembly component which is inserted from standard part library cant be moved.

8) Prevented the pocket from appearing when inserting a pin in a Slider.

7/22/2019 ZW3D 2013 SP

21/25

19

6CAM6.1 CAM Manager

1) Revert CAM wizard

It is very convenient to guide users to finish calculation after inserting an operation from the ribbon.

2) Optimize the update hints

If the feature, the parameters, the tool, the class is edit, the update hint and message will show up.

And more useful messages are provided to guide user to update the operation.

3) Improvement for the NC program node under Output node.

6.2 Functionality Improvements

6.2.1 Increase the accuracy of minimum tool length

ZW3D can automatically detect the minimum tool length to eliminate the human errors and increase the

work efficiency. By improving the accuracy of the minimum tool length, machining can be safer and more

efficient.

6.2.2 New corner control types for Z level

Add D-loop and Extend-Tangent for the corner of Z-level finish operation to protect the corner shape and

to gain higher machining speed. After the machining, the external sharp corners can be achieved to fulfill

the strict requirements in machining.

7/22/2019 ZW3D 2013 SP

22/25

20

D-loop Extend Tangent

6.2.3 Add trapezoid thread type for threading operation

A new type threadtrapezoid thread is available now.

6.2.4 Improvements in Angle Limiting operation

The Angle-limiting operation divides the machined zone into steep region and shallow region.

Consequently, ZW3D can manufacture those regions with proper strategies. With this improvement, you

may easily get a higher surface finished with one operation.

1) Add Cut Order to define which region is first when machining all regions.

2) Support other frames to calculate the tool-path.

7/22/2019 ZW3D 2013 SP

23/25

21

3) Removed the Multi-step of Z-Level in Angle Limiting operation.

4) Renamed the unclear parameters as same as Lace, Offset3D and Z-Level operation.

ZW3D 2013 ZW3D 2013 SP

5) Fixed some tool-path bugsZW3D 2013 ZW3D 2013 SP

6.2.5 Fix gouge bugs in Turning

Some gouge bugs are fixed, like Groove and Into Concave.

7/22/2019 ZW3D 2013 SP

24/25

22

ZW3D 2013 ZW3D 2013 SP

6.2.6 A new command Create Face Curves

This feature can be used to create desire face curves.

Ribbon

>Wireframe

> Curve

>Create Face Curves

ZW3D 2013 ZW3D 2013 SP

6.2.7 New 2X milling operation Nesting

This operation can be used to arrange parts on a plate of material to maximize the number of parts that

will fit. A new feature- Nester is available. Nester feature can be machined by this operation and the

Flame tools are recommended.

7/22/2019 ZW3D 2013 SP

25/25

6.2.8 Optimized lead in/out parameters in Quick Mill roughing

6.2.9 Other Improvements

1) Added a Chip Drill mode for QM Pre-Drill operation.

2) Increased the accuracy of minimum tool length.

3) Fixed a crash bugs: define an open face curve as a contain profile.

4) Optimized the tool-path and improve the stability.

ZW3D 2013 ZW3D 2013 SP