Zoom.E 606.Manual

8/9/2019 Zoom.E 606.Manual

1/21

Operation Manual

Contents

IntroductionThank you for selecting the ZOOM 606 (hereafter simply

called the "606 ").

Please take the time to read this manual carefully so as to

get the most out of the unit and to ensure optimum

performance and reliability.

Retain this manual, the warranty card and all other

documentation for future reference.

S AFETY PREC AUTIONS • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 2

Features • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3

Ba sic Terms • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4

Operating the Unit on B attery P ow er • • • • • • • • • • • • • • • • • • 5

Controls a nd Functions /C onnections • • • • • • • • • • • • • • • • • 6

Selecting P atches for P lay • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8Using the Express ion P eda l • • • • • • • • • • • • • • • • • • • • • • • • • • 10

Us ing the Tuner Function • • • • • • • • • • • • • • • • • • • • • • • • • • • • 12

Making/Cha nging DRIVE Mod ule S ettings • • • • • • • • • • • • 14

Editing a P atch • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 16

Sto ring/Co pying P atc hes • • • • • • • • • • • • • • • • • • • • • • • • • • • • 18

Changing the " P atch C all" Method • • • • • • • • • • • • • • • • • • • • 20

Restoring the Facto ry Defa ults • • • • • • • • • • • • • • • • • • • • • • • 22

Adjusting the Expression Pedal • • • • • • • • • • • • • • • • • • • • • • 23

Effect S equence • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 24Effect P arameters • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 25

Specifications • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 38

Usa ge P reca utions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 39

Troub lesho oting • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 39

Pa tch List


2/21


3/21


4/21


5/219 ZOOM 606 GUITAR

S el e ct i n gP at ch e sf or Pl a y

To direct ly switch the bank

Switch patches

To adjust themaster volume

To switch patches in play mode, usethe [W]/[Q ] foot switches.

You can use the VALUE [+] / [-] keys to directlyswitch among the banks A - G.

Keep both VALUE [+] / [-]

keys depressed for morethan 1 second.

While the master volume

setting is shown, pressingthe VALUE [+] / [-] keychanges the setting.

The setting range is 0 - 50. Whenthe unit is turned off and onagain, the setting will be reset to40.

When using hea dpho nes, the

mas ter volume setting c a n be

used to a djust the liste ning

volume.

Selecting Patches for Play

8 ZOOM 606 GUITAR

Selecting Patches for Play

S el e ct i n gP at ch e sf or Pl a y

Power-on

Set 606 toplay mode

Immed ia tely a fter

turning o n pow er to

the 606, the unit will

be in play mode even

if the [PLAY/EDIT]

selector is s et to a

different p os ition.

When using the 606 on batteries, plug a shielded cablewith mono phone plug into the INPUT jack of the 606.

When the[PLAY/EDIT]selector is set to adifferent position,set it to "PLAY".The currentlyselected bank and

patch number areshown on the display

When using the 606with the AC adapter,

plug the adapterinto the outlet andplug the cable fromthe adapter into theDC 9V jack on the606.

Turn on the guitaramplifier and adjust

the volume to asuitable position.

Bank Patch number

To try out the 606, we recommend that you simply play your

instrument while switching patches. This will let you quickly see what

the 606 can do.


6/211 1 ZOOM 606 GUITAR

U s

i n gt h eE x pr e s si onP e d al

Rock back and forth

Push fully down

NOTE

Operate the pedal

• Ass ignment of mod ules to the

ped a l a nd mo dule on/off sta tus

ca n be stored a s pa rt of a patch(→ p. 18).

• The peda l se nsitivity ca n be

a djusted (→ p. 23).

When VOL is

as signed, the peda l

does not performon/off s witching.

To switch the mo ule on an ofPush the pedal fully down.

The effect ofoperating the pedalwill differ, dependingon which module wasselected in step .Try moving the pedal

to hear the actualsound change.

The currently lit PEDAL ASSIGN LED startsto flash, and the corresponding module isturned off. To return to the on setting, push thepedal down once more.

Rock the pedalback and forthwhile playing yourinstrument.

Using the Expression Pedal

1 0 ZOOM 606 GUITAR

Using the Expression Pedal

U s

i n gt h eE x pr e s si onP e d al

NOTE

Select the moduleto be controlled bythe pedal

The a ctua l effect o f opera ting the express ion pe da l will dep end

on w hich effect pa rameter is s elec ted for the res pec tive mod ule.

• If you se lect a mod ule tha t is s et to OFF in the current pa tch, the

module becomes ON when the pedal is assigned to it. If you

la ter as sign the peda l to a nother module, the previous mod ule

becomes OFF again.

• In the bypa ss mod e (effects te mpora rily sw itched off), the peda l

is a utoma tica lly a ss igned to VOL.

Press the PEDAL ASSIGN keyuntil the LED corresponding tothe esire mo ule is lit .

The LED indicatorsshow which module iscurrently assigned tothe pedal.The following modulescan be selected.

WAH Effect parameter or WAH module

DRIVEEffect parameter of DRIVE moduleMOD/PITCH Effect parameter of MOD/PITCH(modulation/pitch) moduleDLY/REV Effect parameter of DLY/REV(delay/reverb) moduleVOL.

Overall patch volumeAll PEDAL ASSIGN LEDs outExpression pedal is inactive.

The 606 has a built-in expression pedal which can be used to control a

selected effect parameter or the volume level with your foot.



U si n gt h eT un er F u

n ct i on

Adjusting the reference pitch ofthe tuner

Return to playmode

Tune the otherstrings in the sameway.

Press one of the [W] / [Q]foot switches.

Press one of the VALUE [+] / [-] keys.

When power to the unit is

turned o ff and on a ga in, these tting reverts to the defa ult

of " 40" (center A = 440 Hz).

The right side of thedisplay shows a symbolthat indicates by howmuch the tuning is off.

The current referencepitch is shown for about2 seconds. The default

setting is "40" (center A= 440 Hz).

Use the VALUE [+] / [-] keysto adjust the setting.

The setting range is 35 - 45 (centerA = 435 to 445 Hz).

The default reference pitch of the tuner (the setting which isestablished when the unit is turned on) is center A = 440 Hz.You can fine-ad ust this reference pitch if desired.

Pitch is high Pitch is correct Pitch is low

Indica tion turns fa ste r the more the p itch is off.

Using the Tuner Function

1 2 ZOOM 606 GUITAR

Using the Tuner Function

U si n gt h eT un er F u

n ct i on

Switch to bypass or mute

Tune theguitar

Press both [W] / [Q]foot switches

together.

Play the open stringyou want to tune,and watch thedisplay.

Bypass Mute

The left side of the display showsthe note which is closest to thecurrent pitch.

Pressing andimmediately releasingthe switches sets the unitto the bypass condition.Pressing and holding theswitches for at least 1second sets the unit to

the mute condition.

The 606 incorporates an auto-chromatic tuner for guitars. To use the

tuner function, the built-in effects must be bypassed (temporarily

turned off) or muted (original sound and effect sound turned off).

The tune r function is no t a va ila b le if the P LAY/EDIT selec tor is set to

a pos ition o ther than P LAY.NOTE



M ak i n g / C h an g

i n gDRI VE M o d ul e S

et t i n g s

2 6

Adjust the DRIVE

module gain

To switch theDRIVE moduleon or off

Press one of the GAIN [+] / [-] keys.

Press the GAIN [+] / [-] keystogether.

The cha nge ma de in this w a y is

only temporary. When you se lec t

a different patch, the setting will

revert to the origina l cond ition. If

you wa nt to keep the change,

store the patc h, as d esc ribed o npag e 18.

Depending on which effect type iscurrently selected, distortion depth orsignal gain changes. The GAINparameter value is shown for about 2seconds on the display.

switched off, the DRIVE LED at thetop right of the DRIVE selector goesout.

Making/Changing DRIVE Module Settings

1 4 ZOOM 606 GUITAR

Making/Changing DRIVE Module Settings

M ak i n g / C h an g

i n gDRI VE M o d ul e S

et t i n g s

F

2 6

NOTE

Select the DRIVE moduledistortion type

When the DRIVE LED is out, the DRIVE module is off.

If you s witch to a different effect ty pe in thisco ndition, the mo dule is a utoma tica lly turned on.

Use the DRIVEselector to select thedesired distortiontype (effect type).

By setting the

P LAY/EDIT selec to r

to the DRIVE

position, you can

chec k the current

effect type.

The selected effect typename is shown for about2 seconds on the display.For a etaile list o

effect types, see thesection "EffectParameters" at the end ofthis manual.

The DRIVE module comprises various distortion types and gain

settings, which can be adjusted with the dedicated selector and keys at

any time.

The follow ing o peration ca n be ca rried out in pla y mo de or edit

mode.



E d i t i n g aP at ch

NOTE

3 0

NOTE

Changing themodule on/ offsetting

Press both [W] / [Q] footswitches together.

This switches the effect moduleselected with the PLAY/EDITselector on or off.

When the P LAY/EDIT selec to r

is s et to " CONTOUR" or

" TIME" , press ing the [W] /[Q]foot sw itches tog ether has no

effect.

The ed iting c ha nges ma de in this wa y a re only temporary. When

you return to the play mode and select a different patch, thesettings will revert to the original condition. If you want to keep the

cha nge, sto re the settings before s witching the pa tch (→ p.18 ).

Adjust the parameter setting

valueUse the VALUE [+] / [-] keys.The keys operate as follows.

Keeping one key depressed: Value changes continuously.Hold down one key while pressing the other key: Valueincreases rapidly.Pressing both keys simultaneously: Switch to next effecttype in same module.

Editing a Patch

1 6 ZOOM 606 GUITAR

Editing a Patch

E d i t i n g aP at ch

3 0

Lit

Parameter value

Select the effect arameter

The DRIVE mo dule

ca n a lso be directlyedited by using the

DRIVE selector and

G AIN [+ ] /[-] keys

(→ p. 14).

Terminate the e it mo e

se the PLAY EDIT selector to select the moduleand parameter you want to edit.

Set the PLAY/EDIT selector to "PLAY". Theunit reverts to the play mode.

For information on effectmodules and parameters,see the section "EffectParameters" at the end ofthis manual.

The 606 switches to the edit mode and the value of the currentlyselected effect parameter appears on the display. When the 606

is in edit mode, a dot isshown in the bottom rightcorner of the display.

Editing means changing the various effect parameter settings of a

patch. Use an existing patch as a starting point and adjust the

parameters to create your own and original sound.


10/21

1 9 ZOOM 606 GUITAR

S t or i n g / C o p yi n gP at ch e s

NOTE

NOTE

b 4

When the s tore/copyprocess is executed, the

previous content of thes tore target is ove rwrittena nd c annot b e restored if itwa s a user-created patch.You should therefore takeca re w hen selecting atarget pa tch. How ever, thefac tory de fault se ttings ofa n individua l patc h o r all

patches ca n be restored,as des cribed on pa ge 22.

The s tore proc es s is a lsoca nceled when

[P LAY/EDIT] selec to r isoperated instead of thevaVALUE [+ ]/[-] key.

Press the STORE key once more.When the store/copy process is completed, the unit reverts tothe original mode, with the target patch being selected.

The store process is aborted andthe unit reverts to the previousmode.

To cancel thestore/copyprocess

Press the VALUE [+]/[- ] keyinstead of the STORE key.

Storing/Copying Patches

1 8 ZOOM 606 GUITAR

Storing/Copying Patches

S t or i n g / C o p yi n gP at ch e s

NOTE

A 1

b 4

b 4

Press the STORE key inplay mode oredit mode.

Use the[W]/ [Q] foot

switches toselect thetar et locationin which to store the atch.

When sto ring o r copying a p a tch,

it is no t po ss ible to use theVALUE

[+ ]/[-] keys to sw itch o nly theba nk number.

The bank and patch

number on the display

An edited patch can be stored at any desired location in the internal

memory of the unit. It is also possible to copy an existing patch and

store it at another location.


11/21

2 1 ZOOM 606 GUITAR

C h a

n gi n gt h e" P at ch C al l " M et h o d

1

3 A 3

Confirm thepatch change

The patch change isconfirmed, the sound changes,and the display stops flashingand stays constantly lit.

This will return the patch select method to the defaultsetting.

When the desired patch isshown, press the W]/ [Q]foot switches together.

Changing the "Patch call"method back to direct select

To change the "Patch call" method back tonormal direct select operation, simply turn theunit off and back on again.

Confirm

Changing the "Patch Call" Method

2 0 ZOOM 606 GUITAR

Changing the "Patch Call" Method

C h a

n gi n gt h e" P at ch C al l " M et h o d A 1

A

3

Changing the "Patch call" method topre-selectTo change the "Patchcall" method to pre-select, you must turnthe unit on whileholding down the [Qfoot switch.

Specifying

the desiredpatchUse the [W]/ [Q]foot switches toselect the patch youwant to use next.

You can also use the

VALUE [+]/[-] keys toonly switch the bank.

The ank anpatch number ofthe patch to beused next will beshown on the

display, but thesound does not yetchange.

In normal operation, the sound of the 606 will change immediately if a

patch is selected in play mode. This may be undesirable if a patch from

a distant memory location is called and the sound of other unwanted

patches in between is heard. If desired, you can change the "Patch call"

method from direct selection to the pre-select method. In pre-select

mode, you first specify the desired patch and then confirm the

selection. The sound will only change after you have confirmed the

operation.


12/21

2 3 ZOOM 606 GUITAR

A d j u st i n gt h eE x pr e s si onP e d al

The expression pedal of the 606 is adjusted for optimum operation at

the factory, but sometimes, readjustment may be necessary. If the

action of the pedal seems to be insufficient, or if a large change occurs

even if the pedal is only lightly pushed, adjust the pedal as follows.

1.While holding down the PEDAL ASSIGN key,

turn the unit on.The indication "dn" flashes on the display.

2.With the expression pedal fully raised, press the STOREkey.

The display indication changes to "UP".

3.Push the expression pedal fully down and then lift yourfoot off the pedal.When you release your foot, the pedal goes back a little.

4.Press the STORE key.The adjustment is completed, and the unit returns to the play mode.

The po int whe re the S TORE key is p ress ed in ste p 3 det ermines the

mod ule o n/off sw itching point. If you w a nt the pe da l to perform

on/off sw itching w ith a lighter touch, push the key a t a s ome wha t

higher po sition o f the ped a l.

2 2 ZOOM 606 GUITAR

Restoring the Factory Defaults

R e st or i n gt h eF a ct o

r yD ef a ul t s

The 606 comes with 42 recommended patches (factory default

patches). Even if you overwrite any of these patches, you can restore

the original contents of the patch at any time.

There are two ways of restoring factory defaults. "All Initialize" returnsthe entire set of patches to the original condition. "Factory Recall"

restores a specific patch to the original condition.

1.While holding down the STORE key, turn the unit on.

The indication "AL" flashes on the display.

To perform All Initialize2.Press the STORE key once more.

All patch settings are returned to the factory default condition, and

the unit switches to play mode. To cancel All Initialize, press the

VALUE [-] key.

All user-c rea ted pa tches w ill be los t w hen p erforming All Initia lize.

Use this function with ca re.

To perform Factory Recall

2.Use the [W] / [Q] foot switches to select the

patch you want to return to the original

condition.

The specified bank and patch number flashes on the display.

During Factory Recall, the VALUE [+] / [-] keys cannot be used to

switch the bank only.

3.Press the STORE key once more.

The settings of the specified patch are returned to the factory default

condition.

If desired, repeat steps 2 and 3 to restore other patches. To terminatethe Factory Recall operation, press the VALUE [-] key. The unit will

switch to the play mode at this point.

NOTE

n

U P

P eda l fully raised

Push strongly,

so that pedal

touches here

When foot is lifted,

pedal returns slightly

Adjusting the Expression Pedal


13/21


14/21

2 7 ZOOM 606 GUITAR

E f f e ct P ar am et er s

2 6 ZOOM 606 GUITAR


PATCH LEVEL

PATCH LEVEL

Adjusts the overall volume of the patch. A value of 25 corresponds tounity gain (input level and output level are equal).

COMP/LIMITCOMP/LIMIT module

COMPRESSOR (Compressor)This effect type attenuates high-level signal components and boosts low-level signal components, thereby keeping the overall signal level within a

certain range. The effect prolongs sustain and makes the sound moreuniform. Higher setting values result in stronger compression.

LIMITER (Limiter)This effect type attenuates peak levels and prevents overload of the nextmodule. Higher setting values result in stronger limiter action.

OFF (Off)Turns the COMP/LIMIT module off.

This module is comprised of the compressor andlimiter effect types. Use the VALUE [+] / [- ] keysto select the effect type and adjust the effectintensity.

TIME

LEVEL

TIME

LEVEL

TIME

LEVEL

TIME

LEVEL

Original s oundCompressor

LimiterOriginal s ound

WAHWAH module

PEDAL WAHThis effect type allows using the expression pedal for pedal wah. Highersetting values result in higher emphasized frequency.

Shifts the frequency emphasized by the wah effect up or down.

AUTO WAHThis effect type applies the amount of wah which is dependent on playingintensity. Higher setting values result in higher input sensitivity for theauto wah effect, so that wah operates also with low input signal levels.

Adjusts the auto wah sensitivity.

OFFTurns the WAH module off.

Simply selecting PEDAL WAH as effect type is not enough to obtaina wa h effect when moving the p eda l. To e nab le this function, youmust assign the expression pedal to the WAH module with thePEDAL ASSIGN key.

Values 1 - 9 set a freq uency to be empha sized even when the ped alis not ope rated . This res ults in an effec t simila r to half-ope n peda lwah.

This module comprises auto wah and pedal wahfor use with the expression pedal. Use the VALUE[+] / [-] keys to select the effect type and adjustthe effect intensity.

NOTE

Effect Parameters PATCH LEVEL COMP/LIMIT Effect Parameters WAH


15/21

2 9 ZOOM 606 GUITAR


2 8 ZOOM 606 GUITAR


DRIVEDRIVE module

FDR CLN (FDR Clean)Simulates the clean sound of a built-in type tube amplifier.

US BLUESSolid crunch sound for playing the Blues.

MS DRV (MS Drive)Drive sound emulating a British style tube stack amp.

BG DRV (BG Drive)Drive sound emulating a tube stack amp with a tight and controlled midrange.

FUZZ (Fuzz)Sixties style fuzz sound with fat bass.

In addition to 9 distort ion type effects, this modulealso comprises two clean effect types.Use the VALUE [+] / [- ] keys to select the effecttype and the GAIN [+] / [-] keys to adjust the gain.

Adjusts the drive module gain over the range of 1 - 30(common to all effect types in the DRIVE module).

PVY DRV (PVY Drive)High-gain tube amplifier drive sound, great for heavy metal.

OD (Overdrive)Extended overdrive sound with the character of tube amplifier distortion.

DIST (Distortion)

Distortion similar to driving a three-stack amp in the hard rock style.

LEAD (Lead)Smooth, bright distortion sound.

F d

U b

M S

b G

F U

P u

o d

d t

L d

EQ

EQ module (basic parameter)

4 BAND EQ (4-Band Equalizer)Allows boost or cut in the bass/middle/high/presence band. You can selectone of 50 available patterns (1 - 50).

1 - 10: Lower values result in attenuated highs and emphasized lows.11 - 20: Lower values result in lower emphasized frequency.21 - 24: Lower values result in emphasized midrange.

25: Flat characteristics26 - 30: Higher values result in emphasized highs.31 - 40: Higher values result in higher emphasized frequency.41 - 50: Higher values result in emphasized presence and lows.

OFF (Off)Turns the EQ module off.

This module contains a 4-band equalizer. Use theVALUE [+] / [-] keys to select the EQcharacteristics.

ACOUSTIC (Acoustic)Changes the sound of an electric guitar into that of an acoustic guitar.

METAL 7thHeavy metal type sound with emphasized bass and treble. Also suitable for7-string guitar sound.

OFF (Off)Turns the DRIVE module off.

Ac

M t

o F

Effect Parameters DRIVE Effect Parameters DRIVE EQ


16/21

Eff P Eff P


17/21

3 3 ZOOM 606 GUITAR


3 2 ZOOM 606 GUITAR


TREMOLO (Tremolo)This effect periodically varies the volume. Higher setting values

result in a faster tremolo.

TREMOLO➔CHORUS (Tremolo➔Chorus)

This effect type is a serial connection of tremolo and chorus. Highersetting values result in faster tremolo. (Chorus intensity is fixed.)

STEP (Step)This effect introduces a filter which changes randomly, resulting in an auto-arpeggio sound. Higher setting values result in faster step sound change.

STEP➔CHORUS (Step➔Chorus)

This effect type is a serial connection of step and chorus. Higher settingvalues result in faster step sound change. (Chorus intensity is fixed.)

Adjusts the tremolo speed.

Adjusts the step effect speed.

Adjusts the step effect speed.

Adjusts the tremolo speed.

Adjusts the depth of the doubling effect.

DOUBLING➔CHORUS (Doubling➔Chorus)This effect type is a serial connection of doubling and chorus. Highervalues result in a more pronounced doubling effect. (Chorus intensity isfixed.)

TIME

LEVEL

0

-

+

TIME

LEVEL

0

-

+

Origina l sound S igna l a fter tremolo effect

Adjusts the modulation rate of the effect sound.

Adjusts the modulation rate of the effect sound.

FLANGER (Flanger)

FLANGER➔CHORUS (Flanger➔Chorus)This effect type is a serial connection of flanger and chorus. Higher settingvalues result in faster flanger modulation. (Chorus intensity is fixed.)

This effect produces a unique, undulating sound by shifting the pitch upand down. Higher setting values result in faster modulation.

Adjusts the modulation rate of the flanger.

PHASE SHIFT➔CHORUS

This effect type is a serial connection of phaser and chorus. Higher

values result in faster phaser modulation. (Chorus intensity is fixed.)

Adjusts the modulation rate of the phaser.

Adjusts the depth of the doubling effect.

DOUBLING (Doubling)This effect adds very short delay components to the original signal, whichgives the sound a more full-bodied character such as when severalinstruments are playing in unison. Higher setting values result in a morepronounced doubling effect.

PHASE SHIFT (Phaser)This effect mixes a phase-shiftedcomponent to the original sound,resulting in a pulsating character.Higher setting values result infaster modulation.

TIME

LEVEL

0

-

+

Original s ound

Effect s ound

Effect Parameters MOD/PITCH Effect Parameters MOD/PITCH


18/21


19/21


20/21

Patch List


21/21

Patch List

PATCH PATCH NAME COMMENT PEDAL

SUPER DIST

CLEAN DELAY

US BLUES

HEAVY 7ST ROCK

FDR CLEANPEDAL WAH

VAN'S DRIVER

FDR STRAT/SH3

BARRACUDA (J ET)

GBS LESPOLE/PAF

ACOUSTIC

J IMI WAH

MS HI GAIN

BOX

METAL PANEL

BIG PANEL

CLEAN AMERICAN

PVY POWER

SOLDN

TWIN

TWEED

900

MATCH

DUAL

PWM SYNTH

STEP MODESPACE CONTACT

CRY PICK

SYMPHONY

STEEL CHINA

JET PHASE

HEAD LONG

SP ECHO VIOLIN

COOL WAH

UP SIDE DOWN

CHO WAH

ZEP STACK

SLOW HAND

BECK

RANDY

VAI

CORN

1

2

3

4

56

1

2

3

4

5

6

1

2

3

4

5

6

1

2

3

4

5

6

1

23

4

5

6

1

2

3

4

5

6

1

2

3

4

5

6

VOLUME

CHORUS

GAIN

PEDAL PITCH

VOLUMEPEDAL WAH

(PEDAL PITCH)

ECHO

FLANGER

ROOM

GAIN

PEDAL WAH

(CHORUS)

ECHO

GAIN

(DOUBLING)

HALL

GAIN

PITCH

(CHORUS)

TREMOLO

VOLUME

(PITCH)

(FLANGER)

PEDAL WAH

STEPRING MOD

CRY

PHASE

PITCH

PHASE

STEP

SLOW ATTACK

PEDAL WAH

PEDAL PITCH

DELAY

VOLUME

GAIN

PITCH

GAIN

PEDAL PITCH

GAIN

BANK

A[DEMO]

b[ARTIST/

MODEL]

C[MODEL]

d[LINE]

E[SFX]

F[MULTI]

G[ARTIST]

Tight and smooth distortion sound.

Clean sound with pedal-chorus and feedback delay.

American blues sound.

Industrial sound for seven string guitar.

American clean sound.Standard wah sound.

Eddie's famous hard driven sound.

Fat pickup sound for single-coil pickup guitar.

Standard jet sound.

Old humbackers pickup sound.

Electric acoustic guitar simulation sound.

Psychedelic pedal wah sound.

Standard high-gain sound.

Vintage combo amp simulation sound.

Rectified modeling sound with pedal-gain control.

Big stack amp sound.

Bright clean sound.

American fat amp distortion with pedal-gain control.

Rich lead sound for line.

American clean sound for line.

Tweed amp simulation sound for line.

Standard high-gain sound for line.

Crunch clean amp sound for line.

Rectified modeling sound for line.

Synthesizer sound with full effect palette.

SF style sound combining step effect with chorus.Ring modulator sound ,sound good with pedal.

Zoom's famous cry effect sound.

Clean sound with pedal-phase.

Synthesizer-like SFX sound.

Old jet phase sound.

Zoom's famous step effect sound.

Slow attack sound with delay.

Clean sound with pedal-wah.

Fan to octave pitch sound with pedal-pitch.

Distorted sound with auto-wah and chorus effect.

Old British style tube amp modeling sound.

Eric's blues sound.

Beck's octave sound.

Randy's hard driven sound.

Tricky arming play with pedal-pitch.

New age heavy rock sound.

ZOOM CORPORATION

NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi,Tokyo 183-0022, JapanPHONE: +81-42-369-7116 FAX: +81-42-369-7115Web Site: http://www.zoom.co.jp

Printed in Japan 606-5000-1

It is recommended to set the ZNR (Zoom Noise Reduction) value for each patch to match the guitar being used.

Zoom.E 606.Manual

Documents