ZigBee Arteor Wireless Switch Kits CAT NO. PR0660, PR0661, PR0662, PR0663 ■ Wireless pre-programmed switch kits - (set-to-go) ■ 4 options to suit the most common applications ■ No wire connection between control switch and actuator ■ Suitable for new and retrofit installations ■ Easy to install ■ Can be integrated into Legrand SCS automation systems ■ 2 wire (300W) and 3 wire (2400W) options
2
Embed
ZigBee Arteor Wireless Switch Kits - Legrand · PDF fileZigBee Arteor Wireless Switch Kits CAT NO ... designed for monitoring, control and sensor applications. ZigBee is based on the
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Single box dimensions (WxHxD) 350mm x 80mm x 150mm
Single box weight 320g 350g 360g 350g
Product specifications
Supply voltage 240V a.c. (mains operated devices)
IEEE specification 802.15.4, ZigBee
Frequency band 2.4GHz
Max signal rate 250Kb/s
Nominal range 100m (peer-to-peer open space)
Nominal transmission power <1mW
Max number of cell nodes >65000
Battery 1 x CR 2032 3V - Lithium Ion (battery operated devices)
What is ZigBee?
ZigBee is a standard for low-cost, low power radio frequency (RF) mesh networking, designed for monitoring, control and sensor applications. ZigBee is based on the IEEE 802.15.4-2003 standard and is a registered trademark of the ZigBee Alliance.
What are typical applications for ZigBee?
■ Heritage buildings where no-new wires are permitted, or hard to run■ Upgrades existing installations with more functional devices■ Multi-way switching for existing and new installations■ Commercial offices that are likely to change configuration■ Expansion of Legrand SCS automation systems