Near-Zero Flare for Chemical Process Industry via Plant-wide Optimization and Simulation Qiang Xu, Kuyen Li, and John L. Gossage Department of Chemical Engineering Lamar University, Beaumont, TX 77710 TERC SAC Meeting Houston, TX February 21-22, 2008
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Near-Zero Flare for Chemical Process Industry via Plant-wide Optimization and Simulation
Qiang Xu, Kuyen Li, and John L. Gossage
Department of Chemical EngineeringLamar University, Beaumont, TX 77710
TERC SAC MeetingHouston, TX
February 21-22, 2008
Flare Minimization, Why It Is Important?Texas Air Quality Challenges
Ozone Non-Attainment• Dallas/Fort Worth• Houston/Galveston• Beaumont/Port Arthur• El Paso
Ozone Near Non-Attainment• Austin/San Antonio• Corpus Christi/Victoria• Tyler/Longview/Marshall
• Dynamic simulation for feasibility, operability, and safety test
modificationschedulingsimulation
operation
Project Objectives
• Develop a systematic methodology for significant emission reduction from chemical process industry
• Provide the source of emission with details for point (industry) sources, which “have never been compiled previously and are expected to help explain many of the monitoring observations.”
• Demonstrate the benefits will accrue not only for the environment and society, but also for economics and sustainability
MethodologyFramework
for Near-zero Flaring
Off-spec products should be either recycled for online reuse, or stored somewhere temporarily for future reprocessing.
The off-spec products will be reused instead of being flared.
Process Design and Modification
Superstructure for Conceptual Design
Logic-based Mixed-integer Dynamic Optimization for Design and Scheduling
OperationalScheduling
IndustrialExpertise
DesignSuperstructure
Logic-basedMIDO
Dynamics Logic
Binary
SolutionIdentification
Dynamic Simulation Task
Build steady state flowsheet in Aspen Plus
Prepare flowsheet for dynamic simulationAdd Dynamic data
Export simulation
Simulation inAspen Dynamics
Change control system, testing procedures
Test Bed: An Ethylene Plant Startup
C1
C2, C3C4
Achievements from Previous Activities
• The flaring was reduced to less than 3.5 hours
Huntsman Petrochemical Ethylene Plant:
• The flaring was reduced by 75% comparing to the earlier startupLyondell Chemicals Olefin Plant:
• Avoid runaway reactions during the startupLyondell PDGlycol Plant:
• The flaring was reduced by 50% comparing to the earlier startupBASF-TOTAL Ethylene Complex:
Technology Transfer
• Submit the report with the detailed methodology and project data
• Generate papers and give presentations based on the developed methodologies and technologies
• Develop educational website to disseminate concepts of near-zero flare, methodology framework, and selected models and results
• Offer flare minimization workshop at Lamar University through continuing education and provide consultation for chemical plant turnaround operations
Concluding Remarks
• Near-zero flare is a fundamental solution for emission source reduction in chemical process industry
• Integration of process modification, operational scheduling, and dynamic simulation can help chemical plants identify near-zero flaring opportunities
• Our previous research activities and industrial collaborations provide solid foundations for the project
Concluding Remarks (Cont’d)
Research Institute Industrial Partners
Government & Supporting Agency
Near-zero Flare
• Improve Air Quality in Texas
• Provide Point Source Emission
• Cost-effective Control Strategy
• Profitable Pollution Prevention Way
Publications and Presentations
1. “Flare Minimization for Chemical Plant Turnaround Operation via Plant-wide Dynamic Simulation,” accepted and to be appear in Proceedings of FOCAPO 2008.
2. “Flare Minimization during Plant Startup via Dynamic Simulation”, 2007 PSE ASIA, Xi’an, China, August 15 - 18.
3. “Flare minimization toward zero discharge for chemical plant turnaround operation via dynamic simulation”, AIChE Annual Meeting, Salt Lake City, Utah, November 4 - 9 in 2007.
4. “Flare Minimization via Dynamic Simulation,” Int. J. Environment and Pollution, 29, 19, 2007.
5. “Better Plant Startup via Simulation” presentation in the AIChE National Meeting, San Francisco, CA, November 12 - 17, 2006.
6. “Flare Minimization via Dynamic Simulation”, Conference Proceedings in the AIChE National Meeting, New Orleans, FL, April 25 - 29, 2004.
7. EPA Region 6 - P2 Roundtable Meeting, March 11, 2004.8. Beaumont-Port Arthur Emission Events Meeting, TX, June 9, 2004.9. La Porte Emission Events Meeting, June 8, 2004.10. Six master theses and one doctoral dissertation were generated.