Copyright 2016 ZENEM Corporation Who we are and What we do Capabilities of ZENEM Product Examples Customer References Leadership Team Information Quick Turn Prototyping New Product Introduction System and Box Builds ZENEM Corporation Overview
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Copyright 2016 ZENEM Corporation
Who we are and What we do
Capabilities of ZENEM
Product Examples
Customer References
Leadership Team Information
Quick Turn Prototyping New Product Introduction System and Box Builds
ZENEM Corporation Overview
Who We Are
ZENEM Corporation was founded by Engineers and Contract
Manufacturing Executives with over 80 years combined industry
experience with a drive to the highest quality standards.
The company occupies a 18,000 sq ft. manufacturing
facility in Tempe, AZ, with two automated SMT production lines.
We have a strong and growing customer base and the capacity
for significant additional business.
What We Do
ZENEM provides Electronic Manufacturing
Services (EMS) for consumer electronics, medical,
automotive, and aerospace customers. The Company
specializes in quick-turn prototypes, new product
introduction, high volume production and full turnkey
production of system and box builds.
SMT Assembly
Through Hole Assembly
RoHS and Leaded Alloy Processes
Very small to very large boards
BGA and Micro-BGA
Dense Packed Designs, Complex Profiles
IPC-Trained Hand Soldering
Press-Fit Connectors
Board Testing
Cable and Harness Assembly
Mechanical Assembly and Test
Control Panels
Electro-Mechanical Assemblies
Wave Solder
Xray
Conformal Coat
SMT Assembly Area
Capabilities of ZENEM
MPM HiE Screen Printer
Fully automated screen printer
Applies solder paste to 120+ PCB panels per hour
Automatic 2-D solder inspection
Dek Horizon LT Screen Printers
Fully automated screen printer
Automatic 2-D solder inspection
Programmable under-stencil cleaning
Manufacturing Equipment
Phillips Orion and Emerald Pick and Place
4000+ placements per hour
0402 component placement (passives, oddform)
Off-line set-up and programming for extremely fast line change
Phillips Topaz and Emerald Pick and Place
4000+ placements per hour
0201 component placement (passives, BGA, Micro-BGA)
High precision placement for large and complex parts
Off-line set-up and programming for extremely fast line change
Manufacturing Equipment
Electrovert and ERSA Reflow Ovens
5 and 7 zone reflow ovens
Complex profiles
RoHS or leaded solder
Multi-layer, single or double sided boards
CR Technologies Automatic Optical Inspection
Verification of component type, placement, and orientation
Manufacturing Equipment
Electronics Assembly Stations 20 individual stations for hand
soldering, assembly, programming, inspection, and testing
RoHS and Leaded stations separated to ensure no cross-contamination
Dedicated stations for chip programming, board and system level testing, and mechanical assembly
Bonded Inventory and Materials Management Segregated materials
management areas. Off-line job setup and quality
check Supplier qualification and
tracking
Electronic Assembly Workstationwith product in Functional Test
Manufacturing Infrastructure
High Volume and Proto
Prototype
High Volume
Aerospace and Military
Military
Aerospace
Automotive and Consumer
Consumer
Automotive
Copyright 2016 ZENEM Corporation
Intel Prototype
Micro BGA Placement Fine Pitch IC Placement Card Edge Connectors Surface Mount and Thru-Hole
Prototype Projects
Micro BGA/WCSP
1.2mm by 1.7mm package 0.4mm pitch 0.23mm bump diameter
Copyright 2016 ZENEM Corporation
Hi Resolution Medical Microscope Camera
Dense Board, Double-Sided Fine-Pitch Placements Precision Rotations
Optics Controls
Copyright 2016 ZENEM Corporation
RFID Tracking Devices
Double-sided, Dense Packed, Fine Pitch
Product Samples
Personal Safety Device
Complex soldering (Stainless Steel to Copper)
Extremely small form factors (¼” x ¼”)
Copyright 2016 ZENEM Corporation
ZENEM is proud to be in partnership with AZTERA. AZTERA has a specialized team of engineers that can help you accelerate the pace of your technology development. They are well known for creating innovation, precision technology for the energy, manufacturing, and life science industries.
http://www.aztera.com
A few Areas of Expertise are below:• Electrical
• Hardware electronic design and layout• Mechanical
• Mechanical design from concept to production –SolidWorks, Test fixtures
• Software and testing • LabVIEW development and architecture(Certified
LabVIEW developers and architects)
Engineering Partners
Elite Power Solutions –Premier provider of turn-key solutions for advanced energy storage and electric vehicle applications.www.elitepowersolutions.com
SunDanzer– Solar powered refrigeration, providing sustainable solutions to off-grid refrigeration needs.www.sundanzer.com
Peace-of-mind for the homeowner by automatically closing the garage door.www.protectrix.com
Acme Aerospace is the Only True “One-Stop” Battery and Electronics Company. Serving Military and Commercial Aircraft manufacturers.http://www.acme-aero.com
Customer References
Aaron Trask 15 years experience in engineering, technology, consulting, and manufacturing and
business ownership.
Supporting Engineer for Manufacturing, Quality and Continuous Improvement on Medical, Aerospace, Government and Consumer Product industries.
Assisted the establishment of both AS9100 quality systems and NADCAP certification.
Aaron is our Chief Executive Officer.
• Marcus Shewmaker 19 years experience in engineering, technology, consulting, and manufacturing.
Experienced Engineer leading efforts in Design, Manufacturing, Quality and Continuous Improvement on Medical, Aerospace, Government and Consumer Product industries.
Marcus is our Chief Technology Officer.
Sarah Corey Combined 10 years in Aerospace Government Contracts, Customer Service, Sales,
Computer Operations, and Green Belt Certified.
Sarah is our Chief Financial Officer, and also serves as our acting Operations Director.
Dustin Corey 8 years experience in electronics manufacturing, including commodity procurement ,
scheduling and quotes.
Supporting Engineer for Manufacturing, Quality and Continuous Improvement on Medical, Aerospace, Government and Consumer Product industries.
Dustin spearheads our Business Development efforts.
Leadership Team
Copyright 2016 ZENEM Corporation
ZENEM Corporation is committed to providing high quality products and services that exceed the expectations of our customers.
Our policy is achieved through continuous improvement to our quality system and by implementing programs that enable each employee to do their job efficiently and correctly.
Quality Policy
Quick Turn Prototyping New Product Introduction System and Box Builds
Copyright 2016 ZENEM Corporation
Business Development:
Company Headquarters:
Zenem Corporation
2441 W. Erie Drive
Tempe, AZ 85282
office: 480-998-1213
email: [email protected]
website: www.zenemcorp.com
Contact Us!
Contact Information
Quick Turn Prototyping New Product Introduction System and Box Builds
Related Documents
