Reliability Quality & Performance Zero Discharge of Hazardous Chemicals ZDHC
Reliability Quality & Performance
Zero Discharge ofHazardous Chemicals
ZDHC
COMPANYPROFILE
Reliability Quality & Performance
HYDROMATRIXSustainable & Efficient Water engineering succession.
We are Group of engineers to provide the services of water engineering under the name ofHYDROMATRIX with the concept of our founder member Dr Jun-e-Chi and Dr Syed Ali bin OthmanResearch & Study program for water engineering & Chemicals for industrial and commercial utilities.We are focused to save water with zero-discharge concept in industry to utilize water with recyclingand advance treatment engineering of HYDROMATRIX as economical solution for industry and consumers.Our major products and services are…
We are focused on innovative competitive technology with the necessary in-house technical support requiredfor a complete and reliable Wastewater & Water Treatment for Indutrial utilities. We are continually expanding uponour knowledge and services to assist clients with compilation of proven projects. Since its creation,HYDROMATRIX has been trying to constantly increase and diversify its activities and to be a leader inthe Waste Water & Recycling of water in the field of water treatment and waste water treatment ZDHC(Zero Discharge Hazardous chemical) Program.
I n d u s t r i a l Wa s t e Wa t e r Tre a t m e n t .Recycling / Reuse of Water & Zero Discharge.UF Membranes & MBR Modules.Chemicals for Waste Water Treatment Plants.Brackish & Seawater Reverse Osmosis system.Chemicals for BW / SW RO Membranes.Industrial R&D Services.
CONTENTS
HYDROMATRIX offers cost effective approaches for design & construct industrial water and wastewatertreatment system by combining proven equipment and services with arrangements to produce results and ensurelong-term operational life with our customer satisfaction.
Reliability Quality & Performance
WASTE WATER TREATMENT CHEMICALSChemiMatrixApplication of Water Decoloring AgentWater Decoloring AgentPAC-Polyaluminum ChloridePAM- Cationic / Anionic / Nonionic / PolyacrylamideOil & Water Seperating AgentPolyamineOrganic Silicon DefoamerFixing Agent
REVERSE OSMOSIS MEMBRANES CHEMICALSOsmoMatrixAnti Scalant Chemical OSMOTRIX 360 / 639Cleantrix 333Cleantrix 666Cleantrix 909
RECYCLING ULTRA FILTRATION & MEMBRANES BIO REACTERHydroMatrixUF MembarnesHM Series MBRSubmerged Type MBR
12345678
9101112
13-141516
www.rsjsgroup.com01
RSJS GROUP
Dyeing wastewater with activated color and dissapersing color, it is difficuilt to be treated by other water treatmentproducts. But our best product quickly remove colour from waste water & seprate colourfrom water.
Application of Water Decoloring Agent
Wastewater Treatment of Textile Dyeing.
Treatment Process
D y e i n g w a s t e w a t e r
Treated by biotechnology
Use water decoloring agent, Flotation or sedimentation treated water
(Recomended to use PAC & PAM Before treatment for better result)
Application of Use.Dosage of Water decoloring agent : 40-100 PPM will be use with dilution of Sollution 10% or 20% or as per convieantly.per treatment chemical of waste water will be use PAC & PAM in the process of water treatment.
Dosage of PAC: 150 PPMDosage of PAM : 1 PPM
Waste water inletCOD : 600 mg/lColor: 250-300 times
Waste water treated (outlet)COD : about 100mg/lColor : 40-50 times
Result of Decoloring Agent
a) water decoloring agent has good color removal and especially to RED color, It can treat the wastewater to reachStandard limit of Environment Policy.b) In the practice application apply with PAC and PAM together, it can get better result and it is more economical.* PAC-poly-aluminum chloride* PAM-polyacrylamide anionicAdd pac before or after , it depends on the lab test or process requirment.
Reliability Quality & Performance
ChemiMatrix
Water Decoloring AgentChracteristicsDicyandiamide formaldehyde resin
Application1. It is mainly used for waste water treatment for textile, printing dyeing,baverages, food factory paper-making, mining, ink, edible mills, landfillleachate and so on.2. It can be used for color removal treatment for high-colority waste waterfrom dyestuffs plants. It is suitable to treat waste water with activated,acidic and disperse dyestuffs.3. It also can be used in production process of paper & pulp asretention agent.
Advantage1. Invincible decolorization (>95%) and removal of COD, BOD (50~70%)2. Quickly sedimentation,Extact flocculation3. Non-pollution (no aluminum, chlorine, heavy, metal ions ect.)
Technical Specification
Description HM 08-09 HM 10Appearance
Dynamic viscosity (mpa.s, 20°C)
PH (30% water solution)
Solid content%>
colorless or light-color sticky liquid
10~500
2.5~5.0
50
Light yellow or colorless liquid
10~500
2.5~5.0
50
Application Method of Use1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After beingmixed for several minutes , i t can be precipi ta ted or a i r - f loated to beocme clear water .2. The ph value of the waste water should be adjusted to 6-10 for better result.3. When the color and COD are relatively high, it can be used with the help of polyaluminum chloride, PFS, butnot mixed together. In this way treatment cost can be lowered. Whether inorganic coagulant is used before orafterwards depends on the flocculation test and treatment process.
Package and StoragePackage : 30kg, 50kg, 250kg, 1000kg, 1250kg, IBC 25000kgs Liquid bag.Shelftime : one yearStorage : It is harmless, non-flammable, non-explosive, it can not be placed in the sun.This product will appear layer after a long term storage, but the effect will not be affected with stir.Storage temperature: 5-30°C
ChemiMatrix
02
RSJS GROUP
Reliability Quality & Performance
www.rsjsgroup.com
Reliability Quality & Performance
ChemiMatrix
03
RSJS GROUP
PAC – Polyaluminum Chloride
Advantage1. Its purifying effect on low-temperature, low-turbidity and heavily organic-polluted raw water is much better thanother organic flocculant, furthermore, the treatment cost is lowed by 20%-80%.2. It can lead to quick formation of flocculant (especially at low temperature) with big size and rapid precipationservice life of utilities filter of sedimentation basin.3. It can adapt to a wide range of pH value (5-9) , and can reduce the pH value and basicity after processing.4. The dosage is smaller than that of other flocculants. It has wide adaptabillity to the water at differnt temperaturesand at different regions.5. Higher quali ty non-corrosive, easy for operation, and long term use of non-occlusion.
This product is high-effective inorganic polymer coagulant.Description
ApplicationIt is widely applied in water purification, wasterwater treatment,precission cast, paper production, pharmacutical industry and dailychemicals.
1. The water dissolved solids products should be added afte the mixing in water. dilution ratio ganerraly : Solid 2%~20%products(in weight percentages)2. Pharmaceuticals mixing for the increase in ganeral : 1~5 grams/ton (effluent) , 50~200g per ton (waste water)The specific dosage based on the users of pilot test to determine and produce.
Technical Specification
Application of Use
Package: polypropylene woven bag with plastic liner, 25kg/bagShelf life : 2 Years;Storage : should be stored in dry place.
Package and Storage
DescriptionWaste water treatment Drinking water treatment
PAC-02 PAC-12 PAC-05 PAC-09Appearance (powder)
AI203 content % >
Basicity %
PH (1%water solution)
Water insolubes %<
Note: our product can be made upon your special request.
Yellow
28-0
75.0-90.0
0.5
brown
26-0
-------
1.5
White
30.0
40.0-60.0
0.1
3.5-5.0
Light yellow
29.0
60.0-80.0
0.1
www.rsjsgroup.com
RSJS GROUP
ChemiMatrix
04
PAM – Polyacrylamide (Cationic / Anionic / Nonionic)
Technical Specification
DescriptionThis product is a water-soluble high polymer. It’s not soluble inmost organic solvents. with good flocculating activity, and canreduce the friction resistance between liquid.
Application1. It can be used to recycle the wastewater from clayproducing.2. It can be used to centrifugalize the tailings of coal washingand filter the fine particles of iron ore.3. It can also be used to treat industrial wastewater.
Cationic Type
Note: Our product could be made according to consumer’s request.
Description
Appearance
Solid content % >
Molecular weight
Ionicity%
Anionic Type Nonionic Type
white fine-sand shaped powder
90.0
6 million~10million
5~80
white fine-sand shaped powder
90.0
15 million~25million
10~40
white fine-sand shaped powder
90.0
8 million~15million
>5
Application of Use1. The product should be prepared for the water solution of 0.1% as concentration. It is better to use neutral anddesalted water.2. The product should be scattered evenly in the stirring water, and the dissolving can be acclerated by warming thewater (below 60°)3. The most economical dosage can be determined based on a preliminary test. The pH value of the water to betreated should be addjusted before the treatment.
Package and StotagePackage:1. The Solid product can be packed in inner plastic bags, and further in polypropylene woven bags. with each bagcontaining 25kg. 2. The colloidal product can be packed in inner plastic bags and further in fiber plastic drums witheach drums containing 50 kg or 200 kgStorage:Should be sealed and stored in a dry and cool Place below 35°C.
Reliability Quality & Performance
www.rsjsgroup.com
ChemiMatrix
Demulsifier HM-26Demulsifier is oil exploition, oil refining, wastewater treatment industry of chemicals agents. the demulsiferbelongs to the surface active agent in organic systhesis. It modification, add or to synergistic agent. It has goodquality and enough ability of flocculation to coalescence. It can make the demulsification of emulsion systemquickly and acheive the effect of oil-water separation. The prodcut suitable for all kinds of oil exploration of oil andwater separation around the world. it can be used of desalination and dehydration in refinery sewage treatmentsewage purification oily wastewater treatment and so on.
Discription HM-501 HM-502Appearance
Solid content%
PH1% aqueous solution
Viscosity (mpa.s,25°C)
colorless or light yellow liquid
40±1
4.0~7.0
50000~100000
colorless or light yellow liquid
10±1
4.0~7.0
10000~30000
Oil-and-Water Seprating Agent
Technical Specification
DescriptionThis product is colorless or light yellow liquid, specific gravity 1.02g/cm3, decomposition temperature were150°C. Soluble in water and have good stability. The product is copolymer of Catonic monomer dimethyldiallyl ammonium chloride and Nonionic monomer acrylamide acrylamide. It is used for electrolytic, neutralize andadsorption, so it is fit for separation of oil water mixture in oil extraction. It could be quickly, effective to clean thewaste water with anionic chemicals or negative charge particle. It have synergetic effects and could speed up theflocilation to reduce the cost.
Discription HM-26 SeriesSolubility
Outside view
Dense degree
Dehydration rate
Miscibility with water
Colorless - Brown sticky liquid
1.010-1.250
>90%
Application of UseThe product could be used to oil second mining, the mining output product dehydration, oil field sewage treatment,oil field containing polymer flooding sewage, oil refinery wastewater treatment, oily water in food processing,paper mill waster water add the middle drnking wasterwater treatment, undergroud sewage etc.
Package: 1 .25L, 200L , 1000L , IBC drumStorage:Sealed preservation, avoid contact with strong oxidizer. Shelf life one year according to non-dangerous goods transport.
Package and Storage
RSJS GROUP
05
Reliability Quality & Performance
www.rsjsgroup.com
Note: Our product could be made according to consumer’s request.
Application of Use:
1. When used alone, it should be diluted to the concentration of 0.5%0.05% (based on solid content).2. When used to treat different source water waste water, the dosage is on the turbidity and theconcentration of the water. The most economica; dosage is based on the trial. The dosing spot and the mixingvelocity should be carefuully decided to guarantee that the chemical can be mixed equally with the other chemicals inthe water and the flocs can not be broken.3.It is better to dose the product continously.
Package and Storage
Package : 210kg/drum, 1100 kgs/IBCShelf life : one yearStorage : This product should be sealed and stored ina dry and cool place.If there appears stratification after the long-termstorage, it can be mixed before being used.
06
Appearance Red-brown transparent liquidAppearance Colorless or yellow liquid
Ionic nature
PH value (1% water solution
Solid content %
cation
4.0~7.0
50
RSJS GROUP
ChemiMatrixPolyamine
Technical Specification
This product is liquid cation polymers of different molecular-weightwhich work efficiently as primary coagulants and chargeneutralization agents in liquid-solid separation process in a widevariety of industries.It’s used for water treatment and paper mills.
Application
1. Water clarification2.Belt filter, centrifuge and screw press dewater3.Dissolved air flotation4. Dissolved air flotation5. Filtration
Description
Reliability Quality & Performance
www.rsjsgroup.com
07
RSJS GROUP
ChemiMatrixOrganic Silicon Defoamer
FeaturesComponents of polysiloxane, modified polysiloxane, silconeresin, white cardbo black dispersing agent and stablizer, etc;Reduce at low concentrations can maintain good eliminationbubble suppression effect;Decrease foam supression performance is promienent;Easily dispersed in water;The compatibility of low and foaming medium;Prevent the growth of microorganisms.
Technical Specifications
Using for vaccuming-high temperature vaccum or pressure washing machine in paper chemical pulping;The anti depressant foam in the textile industry and the former treatment agent.use for elimination the chemical cleaning of high temperature and strong alkali;also be used in the foam supression in the water faced system of high temperature and alkali;Use for the system which high demand for bubble suppression.Defoamer can be added after foam ganerated as foam supressions components according to different system,dosage of defoaming agent is 10~1000 ppm, the best dosage according to particluar case decided by the customer.defoamer can be used directly , can also be used after dilution.in the foaming system must be totally mixed anddispersed, it can be added directly, without dilution cannot add it into the water directly, it is easy toappear layer and demulsification, then affect the product quality directly or other incorrectconsequences method.
Package:25 kg / Drum, 200/ Drum , 1000 Kg/IBCStorage:1.10~30°C, it cant be place in the sunlight2. It cannot add acid, alkali, salt and other substances3. This product will apear layer after a long-term storage but the effect will not be affected with stir.4. It will be freeze under 0°C, Stir after liquefy it will not effect the result.
Package and Storage
Application of Use
Appearance Red-brown transparent liquidAppearance Colorless or yellow liquid
pHEmulsion ionic
Appropriate thinner
6.5~8.5Weak anionic
10-30°C thickening water
Standard: GB/T 26527-2011
Reliability Quality & Performance
www.rsjsgroup.com
HMF 1 HMF 2 HMF 3 HMF 6 HMF 10 HMF 12
08
ApplicationIn the condition of suitable pH (5.5~6.5), temperature under 50~70°C adding HMF1 to dyeing and soaping treatedfabric for 15-20 mins treatment. It should add HMF-1 before temperature rise, after add at the temperature will heatup. Dosage of fixing agent is depend on the fabric color cincentration, the suggested dosages as followed:1. Dipping : 0.2~0.7 % (o.w.f)2. Padding :4~10g/LIf the fixing agent is applied after finishing process, then coulde be used with non-ionic softener,best doasge dependson test.
Package: 1 . It is Packaged in 50L , 125L, 200L, 1100L plastic drum.Storage: It should be stored in a cool, dry and ventilated place, at room tempreture.Shelflife : 12 months.
Package and Storage
ChemiMatrix
Poly Dimethyldiallylammonium Chloride / Cation Polymer / Polyamine Cationic Polymer Formaldehyde-free fixingagent belongs to polymerization polyamine cationic polymer/ Micromolecule aromatic sulfo-acid condesation polymer.
Description
RSJS GROUP
Fixing Agent
AppearanceAppearance
Solid content%
Viscosity (mpa.s 25°C)
PH (1% water solution)
Fixing Agent HMF-10 HMF-12
Red-brown transparent liquid
60±0.5
7.0~9.0
Easily dissolve in water
Light brown liquid
60±0.5
1.5~3.5
Easily soluble
AppearanceAppearance
Solid content%
Viscosity (mpa.s 25°C)
PH (1% water solution)
colorless or light yellow viscous liquid
40±0.5
8000~12000
3.0~7.0
Red-brown transparent liquid
50±0.5
2000~3000
7.0~10.0
Fixing Agent HMF-1 HMF-2
AppearanceAppearance
Solid content%
Viscosity (mpa.s 25°C)
PH (1% water solution)
Fixing Agent HMF-3 HMF-6
Light yellow transparent liquid
60±0.5
7.0~10.0
Red-brown transparent liquid
48±0.5
500~6000
2.0~6.0
Reliability Quality & Performance
www.rsjsgroup.com
OsmoMatrix
RSJS GROUP
09
OsmoTrix 360Universal Anti-Scalant Chemical
Product pH
Appearance
Calcium Carbonate LSI + 2.6
Silica <1.32
Iron <1.32
Specific Gravity
Flammable
Volatile
5.0 to 5.5
Pale Yellow Liquid
Dosage: 2.0 to 4.0 mg/lit.
Dosage: 3.5-4.0 mg/lit.
Dosage: 5.5-6.0 mg/lit
1.11 kg/dm3
None
None
Index & Conditions for Specifications Osmotrix 360
Pre-treatment systems for RO plants are designed to produce feed water with a reduced fouling potential by removingpotential fouling species prior to membrane treatment. Common foulants include:• Calcium carbonate and calcium sulphate scales• Organic matter• Iron• Colloidal material• Bio-film and microorganisms• SilicaOther contaminants such as barium and strontium sulphate, calcium fluoride, aluminum silicate and manganese saltshave been identified but are comparatively rare. It is also possible for surface-active chemicals such as cationicsurfactants or polymeric flocculants to result in irreversible fouling.OsmoTrix 360 has been developed specifically as a calcium sulphate inhibitor, for waters with a CaSO4 Ipb/Kspratio of 2.8 to 7.0. It functions by a powerful threshold mechanism that retards theprecipitation of calcium sulphate, increasing its relative solubility.OsmoTrix 360 also exhibits strong inhibitionproperties against calcium carbonate, and is highly tolerant to the presence of iron. It is liquid Antiscalant & stabilizerControls inorganic scales, metals and colloids in Reverse Osmosis membranes also reducing membrane fouling tendenciesand minimizing membrane cleaning requirements.
OsmoTrix 360 maintains performance integrity at extreme pH and temperatures and is stable in the presence of multivalentions such as dissolved iron and sio2. Furthermore this product will not precipitate, crystallize, or blind the membrane at highconcentrations. OsmoTrix 360 contains no-phosphonates or phosphate derivative. This unique attribute allows it to performwithout contributing to metal precipitation on the membranes. further it will not allow biological growth in membranes surfacearea, it is typically dosed into feed waters at the rate of 3.5 – 5.0 ppm and it may be injected with SMBS anti microbiologicalpretreatment.
Description
OSMOTRIX360 is available in 30kg plastic Gerry Cane, (250 Kg) drums, in bulk
1. Highly effective calcium sulphate inhibitor.2. Effective against iron and calcium carbonate.3. Compatible with all membrane types.4. Cost-effective treatment for all brackish and seawater systems.5 Liquid product, easy to handle.
Reliability Quality & Performance
Technical Specification
Package & Storage
www.rsjsgroup.com
RSJS GROUP
10
CLEANTRIX333Incredible Cleaner for the RO Membranes
CleanTrix 333 is special formulation for cleaning of the TFC membranes of Reverse Osmosis units.CleanTrix 333 form eliminates splashing risk. Its acid concentration efficiently removes the salts of calciumfrom membranes. The product is also not harmful to soft metals like copper, Brass, Aluminum etc.
CleanTrix 333 is used in a concentration of 10 to 20 % of solution according to the intensity of the deposits to be eliminated.Make the solution in RO permeate and circulate it for 2-3 hrs, preferably @ 35-40 oC. Furtheraddition of the product may be required during cleaning job to maintain the pH 3.0 to 4.0 of the solution.After treatment with CleanTrix 333 consecutive rinses of the membrane and apparatus are carried out toremove all traces of acidity.
Description
Chemical name of product : Food Grade Salts of Acids.Appearance : White Granules Solid Color : Color LessOdor : NonepH : 2.5 to 3.5 (in a 1% Solution)Density : 1.56 + 0.01g/cm3Boiling Point : 98 deg CWater Solubility : readily SolubleExplosively : noneSpecial hazards : Reaction with metals, with hydrogen as reactionImportant hazards : Irritant
Acute toxicityInhalation : -Skin contact : None IrritatingEye contact : IrritatingWhen swallowing : IrritatingOther information: In case of skin irritation wash with water.
Toxicological Information
Composition And Chemical Identification
Store the product in a dry area of quality assurance. For the handling of CleanTrix 333, people have to respect thecommon rules of security to work with corrosive substances.
: 10 Kg, Plastic bag, 30 Kg Drums.: Remove contaminated clothing, wash with water and soap.: Rinse with running water during at least 10 minutes. Consult an eye surgeon.: Store room temperature.: Polyethylene bag, Plastic Drum
Packag ingStorageEye contactSkin contactPackag ing
OsmoMatrix™
Reliability Quality & Performance
Package & Storage
www.rsjsgroup.com
11
CLEANTRIX666Colloidal & Silt fouling of Membranes
A concentration of 5-10 % CleanTrix 666 with permeate water is applied through a closed loop circulation for 1-3 hrs. Make thesolution in RO permeate and circulate it for 2-3 hrs, preferably @ 45-55 oC. Further addition of the product may be required duringcleaning job to maintain the pH 8.5 of the solution. After completion of cleaning drain the solution and flush the complete unit ofclosed circuit with plenty of fresh permeate water.
CleanTrix 666 is a high pH, powdered formulation designed to remove organics, Silt, deposition from themembranes surface. This cleaner formulated specifically for colloidal and biological fouling. As a resultpermeate quality and quantity both become poor, but CleanTrix 666 is a treatment for the efficient removal of such foulants.form,eliminates fouling on membranes.
Package & Storage
Store the product in a dry area of quality assurance. For the handling of CleanTrix 666, people have to respect thecommon rules of security to work with corrosive substances.
Packaging 10 Kg Plastic BucketSkin contact Remove contaminated clothing, wash with water and soap.Eye contact Rinse with running water during at least 10 minutes. Consult an eye surgeon.Storage Store room temperature.Packaging Polyethylene bag
RSJS GROUP
Description
Appearance : White PowderpH approx. : 8.0 + 0.1(in a 1 %-solution)Density : 1.2 g/cm3 (Approx.)Flash point : Non-combustibleWater solubility : 29-gm/100 ml.Melting point : 75 CoSolubility in water (20Co) : miscible in all concentrationsFlash point : NoneAuto ignition temperature : None
Acute toxicityInhalation -Skin contact None IrritatingEye contact IrritatingWhen swallowing IrritatingOther information
Composition And Chemical Identification
Toxicological Information
In case of skin irritation wash with water.
OsmoMatrix
Reliability Quality & Performance
www.rsjsgroup.com
12
CLEANTRIX909Incredible De-scalar for the RO Membranes
RSJS GROUP
Feeding
CleanTrix 909 is special formulation high effective liquid cleaner for cleaning of the TFC membranes of Reverse Osmosisunits. CleanTrix 909 being in liquid form eliminates splashing risk; its acid concentration efficiently removes the salts ofcalcium from membranes. The product is also not harmful on poly-sulphone layers and polyamide TFC membranes.
Description
CleanTrix 909 is used in a concentration of 10-20 % solution according to the intensity of the deposits to be eliminated.Make the solution in RO permeate and circulate it for 1-2 hrs, preferably @ 35-45 oC. Further addition of the productmay be required during cleaning job to maintain the pH with 2.5 to 3.0 of the solution. After treatment with CleanTrix 909consecutive rinses of the membrane and apparatus are carried out to remove all traces of acidity.
OsmoMatrix
Composition And Chemical Identification
Appearance Pale yellow liquid pH 2.0-2.5Density 1.12 + 0.01g/cm3Freezing point 10 deg CExplosively noneSpecial hazards Reaction with metals,with hydrogen as reaction
Toxicological Information
Acute toxicityInhalation -Skin contact None IrritatingEye contact IrritatingWhen swallowing IrritatingOther information In case of skin irritation wash with water.
Package & StorageStore the product in a dry area of quality assurance. For the handling of CleanTrix 909 , people have to respectthe common rules of security to work with corrosive substances.
Packaging 25 Kg.Skin contact Remove contaminated clothing, wash with water and soap.Eye contact Rinse with chilled running water during at least 10 minutes. Consult an eye surgeon.Storage Store room temperature.Packaging Gerry Cane Plastic Drum.
Reliability Quality & Performance
www.rsjsgroup.com
13
Flow Direction ofHollow Fiber
RSJS GROUP
Clean & Clear Water Provided
Pre-Treatment for Reverse Osmosis
Post Treatment of Waste Water
HydroMatrix
Reliability Quality & Performance
www.rsjsgroup.com
• Colloidal Fouling• Bacterial Fouling• Chemical Fouling
Hydromatrix high quality membranes are highly suitable use for the post treatment of waste treated waterrecycling of water treated by waste water treatment plant. After treatment of waste water which can be usefor the reverse osmosis system, Cooling towers or gradening or washing purpose.
HYDROMATRIX UF Membranes highly recommended for the pre-treatment of reverseosmosis membranes from obstacle the fouling and it is a protection of mentioned below fouling andproduct ion loses a lso incerease the membranes l i fe and qual i ty of premate water .
Hydromatrix HMUF series membranes are high quality product specially designed for the treatment ofhigh turbidity water, river water, canal water and drinking water filtration system to produce germ water forhealthy environment.
14
HYDROMATRIX UF Membranes Series
RSJS GROUP
HMUF 868PVDF
HYDROMATRIXUF Model
TM
HMUF 947PVDF
HMUF 1068PVDF
MembranesMaterial
Dimensionsmm (inch)
MembranesActive Area
MinimumFlow Rate
MaximumFlow Rate
PVDF
PVDF
PVDF
200 X 1710(8X68.4)
225 X 1860(9X74.4)
250 X 1710(10X68.4)
47 m2
60 m2
78 m2
1.88 M3/hr
2.4 M3/hr
3.2 M3/hr
3.7 m3/hr
4.8 m3/hr
6.2 m3/hr
Reliability Quality & Performance
HydroMatrix
www.rsjsgroup.com
Hydromatrix HMUF Series Ultra Filtration Membranes.
RSJS GROUP
15
Reliability Quality & Performance
HydroMatrix
www.rsjsgroup.com
MBR Membranes Bio-ReactorHM Series Disc Type Bio Reactor
The HMMBR disc type bioreactor advance treatnent method with self
c leaning and f lushing process dur ing the operat ion of the sys tem
H y d r o m a t r i x u n i q u e a n d c u s t o m i s e d d e s i g n s o f b i o - r e a c t o r
wi thout in ter rupt ion of opera t ional process , i t s se l f c leaning and
s e l f b a c k w a s h i n g s y s t e m a l s o i n c r e a s e t h e l i f e o f M B R .
I t i s wede ly us ing in the domes t ic sewage t rea tment , Indus t r i a l
eff luent t reatment and special ly where low BOD COD are required
at discharge of the waste water treatment plant to meet the environment
q u a l i t y s t a n d a r d & m a r i n e q u a l i t y s t a n d a r d s o r r e c y c l i n g o f
the water for re-use in utilities requirement.
16
Application Parameters
RSJS GROUP
Filtration Performance
Applications of Hm Series Submerged MBR Module
Reliability Quality & Performance
HydroMatrix
www.rsjsgroup.com
Industrial waste water treatment recycle and reuse;Municipal sewage standard improvement and reuse.
The product is proved to have below filtering effects according to its service conditions in various water sources:
Reliability Quality & Performance
HydroMatrix ChemiMatrix OsmoMatrix
RSJS Martin Group PLTLLP0018149-LGN
Lot 8 - 02, Jalan Setia Tropika 1/18, Setia TropikaJohor Bahru JOHOR 81200 Malaysia
Phone : +60 7 2075457Phone / Fax : +60 7 218 5100Email : [email protected] : www.rsjsgroup.com