Yuletide Glitz Decor #61045 • 12 DESIGNS It is a violation of copyright law to make and distibute copies of OESD software or artwork. Software is licensed to the original purchaser for use at one location. © 1992-2007 OESD, Inc. All rights reserved HE861_48 Snowflakes 5.87 X 3.88 in. 149.10 X 98.55 mm 19,716 St. R L HE862_48 Snowflake 3.60 X 3.48 in. 91.44 X 88.39 mm 9,941 St. R HE863_48 Star 3.19 X 2.16 in. 81.03 X 54.86 mm 4,685 St. R HE864_48 Bell 4.03 X 2.35 in. 102.36 X 59.69 mm 8,567 St. R HE865_48 Bell Circle 3.40 X 3.41 in. 86.36 X 86.61 mm 9,227 St. R HE866_48 Tree 3.82 X 2.58 in. 97.03 X 65.53 mm 5,764 St. R HE867_48 Bow 3.74 X 3.39 in. 95.00 X 86.11 mm 8,675 St. R HE868_48 Angel 3.48 X 2.56 in. 88.39 X 65.02 mm 5,842 St. R HE869_48 Angel 2 3.25 X 3.14 in. 82.55 X 79.76 mm 8,487 St. R HE870_48 Ornaments 4.72 X 3.68 in. 119.89 X 93.47 mm 11,088 St. R z Design contains a loose fill. R Some white areas shown are not stitched. L = Design is larger than 5” (127 mm) in either direction. S = Design is smaller than 1.5” (38.1 mm) in either direction. HE871_48 Lacy Wrap 6.89 X 3.93 in. 175.01 X 99.82 mm 21,776 St. R L HE872_48 Doily 4.93 X 4.93 in. 125.22 X 125.22 mm 16,994 St. R
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Yuletide Glitz Decor#61045 • 12 DESIGNS
It is a violation of copyright law to make and distibute copies of OESD software or artwork. Software is licensed to the original purchaser for use at one location. © 1992-2007 OESD, Inc. All rights reserved
HE861_48 Snowflakes5.87 X 3.88 in.
149.10 X 98.55 mm19,716 St. R L
HE862_48 Snowflake3.60 X 3.48 in.
91.44 X 88.39 mm9,941 St. R
HE863_48 Star3.19 X 2.16 in.
81.03 X 54.86 mm4,685 St. R
HE864_48 Bell4.03 X 2.35 in.
102.36 X 59.69 mm8,567 St. R
HE865_48 Bell Circle3.40 X 3.41 in.
86.36 X 86.61 mm9,227 St. R
HE866_48 Tree3.82 X 2.58 in.
97.03 X 65.53 mm5,764 St. R
HE867_48 Bow3.74 X 3.39 in.
95.00 X 86.11 mm8,675 St. R
HE868_48 Angel3.48 X 2.56 in.
88.39 X 65.02 mm5,842 St. R
HE869_48 Angel 23.25 X 3.14 in.
82.55 X 79.76 mm8,487 St. R
HE870_48 Ornaments4.72 X 3.68 in.
119.89 X 93.47 mm11,088 St. R
z Design contains a loose fill.R Some white areas shown are not stitched.
L = Design is larger than 5” (127 mm) in either direction. S = Design is smaller than 1.5” (38.1 mm) in either direction.
HE871_48 Lacy Wrap6.89 X 3.93 in.
175.01 X 99.82 mm21,776 St. R L
HE872_48 Doily4.93 X 4.93 in.
125.22 X 125.22 mm16,994 St. R
#61045 • 12 DESIGNS
It is a violation of copyright law to make and distibute copies of OESD software or artwork. Software is licensed to the original purchaser for use at one location. © 1992-2007 OESD, Inc. All rights reserved
HE861_48 Snowflakesn 1. Linework ..............................7011n 2. Poinsettia & Swirls ..............1805n 3. Snowflakes ..........................0870
HE862_48 Snowflaken 1. Linework ..............................7011n 2. Snowflake............................0870n 3. Swirls ...................................1805
HE863_48 Starn 1. Light Swirls & Inner Line
Star ..................................7011n 2. Poinsettia & Swirls ..............1805n 3. Leaves & Vines ...................5643n 4. Star......................................0870
HE864_48 Belln 1. Light Swirls ..........................7011n 2. Leaves & Vines ...................5643n 3. Berries & Swirls ...................1805n 4. Bell ......................................0870
HE865_48 Bell Circlen 1. Light Linework .....................7011n 2. Vines & Leaves ...................5643n 3. Berries & Swirls ...................1805n 4. Border & Bell .......................0870
HE866_48 Treen 1. Linework ..............................7011n 2. Poinsettia & Swirls ..............1805n 3. Tree & Star ..........................0870
HE867_48 Bown 1. Linework ..............................7011n 2. Leaves & Swirls ...................5643n 3. Berries & Swirls ...................1805n 4. Bow .....................................0870
HE868_48 Angeln 1. Light Linework .....................7011n 2. Swirls & Dark Linework .......1805n 3. Angel ...................................0870
HE869_48 Angel 2n 1. Linework ..............................7011n 2. Dark Swirls ..........................1805n 3. Swirls ...................................5643n 4. Border & Angel ....................0870
HE870_48 Ornamentsn 1. Ornament Linework &
Swirls ...............................7011n 2. Leaves & Vines ...................5643n 3. Berries, Poinsettia &
Swirls ...............................1805n 4. Ornaments & Swirls ............0870
HE871_48 Lacy Wrapn 1. Pattern/Placement ...............0870n 2. Trim & Tack Down ...............0870n 3. Lace & Linework ..................0870n 4. Lace Edge ...........................7011n 5. Leaves.................................5643n 6. Berries .................................1805
HE872_48 Doilyn 1. Pattern/Placement ...............0870n 2. Trim & Tack Down ...............0870n 3. Lace ....................................0870n 4. Gold Trim.............................7011
Listings below indicate color sample, stitching order and suggested Isacord thread color number
Yuletide Glitz Decor
Page 1 of 4 Yuletide Glitz Decor #61045 Copyright OESD 2007
Christmas Candle Wrap
There are several of the designs in this collection that can be inserted into the center of the candle wrap to make it more decorative. You can either use your software program to bring the designs together or bring the parts together in your embroidery machine.
Supplies: • OESD Badgemaster or AquaMesh Stabilizer• 505 Temporary Spray Adhesive• Isacord Polyester Embroidery Thread• Yenmet Metallic Thread• two pieces of fabric (one for the outside and one for the inside of the
candle wrap) each at least 6 x 9 inches
1. Bringing the designs together in Explorations software. Open yourExplorations software and create a new project.
2. Locate the Candle Wrap design and drag it onto your work space.
3. Locate the design you would like to use with your candlewrap and drag it ontothe work surface. Click Edit and Select All. Click and drag the second designinto the center of the first design.
4. Click the Connect Mode to get the design to your embroidery machine.
At the Machine:
1. Hoop a piece of OESD Badgemaster stabilizer or OESD AquaMeshstabilizer. Stitch the first color. This is the placement line.
Page 2 of 4 Yuletide Glitz Decor #61045 Copyright OESD 2007
2. There are two different ways to do the next step in this project each outlinedbelow:
Trim in Place: On the wrong side, lightly spray each 6” X 9” rectangle of fabric with 505 Temporary Spray Adhesive. Place each piece of fabric over the stitch line. The top piece should be right side up and the other pieces, which are placed on the bottom, should also be facing right sides out.
Stitch the next color. When the machine stops, remove the hoop from the machine (DO NOT remove the fabric from the hoop) and carefully trim the excess fabric closely around the shape.
Place the hoop back on the machine. Use matching bobbin thread and continue to stitch the design.
Using a Pattern: Using the pattern provided cut out the candle wrap. On the wrong side, lightly spray the fabric with 505 Temporary Spray Adhesive. Place the cut out shape on the stabilizer inside the stitched shape. Use matching bobbin thread and continue to stitch the design
Page 3 of 4 Yuletide Glitz Decor #61045 Copyright OESD 2007
3. Embellish with Glitz and use ribbon to tie the candle wrap around your candle.
Page 4 of 4 Yuletide Glitz Decor #61045 Copyright OESD 2007
Christmas Coaster There are several of the designs in this collection that can be inserted into the center of the candle wrap to make it more decorative. You can either use your software program to bring the designs together or bring the parts together in your embroidery machine.
Supplies: • OESD Badgemaster or Aqua Mesh Stabilizer• 505 Temporary Spray Adhesive• Isacord Polyester Embroidery Thread• Yenmet Metallic Thread• scraps of red, green or ivory cotton/satin fabric• Optional: Explorations Software
1. Bringing the designs together in Explorations software. Open your Explorationssoftware and create a new project.
2. Locate the coaster design and drag it onto your work space.
Page 1 of 3 Yuletide Glitz Decor #61045 Copyright OESD 2007
3. Locate the second design you would like to have in the center of your coaster anddrag it onto the work space. Click Edit and Select all. Click Align and Centers tocenter the second design with the first.
4. Send the completed design to your embroidery machine for stitching.
At the embroidery machine:
1. Hoop a piece of OESD Badgemaster stabilizer or OESD Aqua Mesh stabilizer.Stitch the first color. This is the placement line.
Page 2 of 3 Yuletide Glitz Decor #61045 Copyright OESD 2007
2. There are two ways to stitch this project each outlined below:
Trim in Place: On the wrong side, lightly spray 2―6” X 6” squares of fabric with 505 Temporary Spray Adhesive. Place one square on the top of the stitched circle with right side up.
Place the second square on the bottom of the stabilizer under the hoop with the wrong side of the fabric against the stabilizer. Stitch the next color. When the machine stops, remove the hoop from the machine (DO NOT remove the stabilizer from the hoop) and carefully trim the excess fabric around the circle on the top and the bottom.
Place the hoop back on the machine. Use matching bobbin thread and continue to stitch the design.
Using a Pattern: Using the pattern provided cut out two circles. On the wrong side of the circles, lightly spray with 505 Temporary Spray Adhesive. Place 1 circle on top of the stabilizer inside the stitched circle. Place the second circle under the hoop with the wrong side of the fabric against the stabilizer. Use matching bobbin thread and continue to stitch the design.
Page 3 of 3 Yuletide Glitz Decor #61045 Copyright OESD 2007
Page 1 of 1
Yuletide Glitz Decor #61045 Copyright OESD 2007
ApronPurchase a plain apron or make one from a pattern of your choice.Fold the top of the apron in half and mark the fold for the verticalcenter.Measure down 3½” from the top and mark the horizontal center.Where these lines intersect will be the center of the embroidery.Adhere two layers of OESD Ultra Clean & Tear Stabilizer togetherwith 505 Temporary Spray Adhesive™.Spray the top of the stabilizer and adhere to the wrong side of theapron.Hoop all three layers and place on the machine.Embroider the design of your choice, the sample used #HE861-48from Collection 2.Remove the stabilizer one layer at a time.Decorate the tie with a decorative stitch on the sewing machine.
Add a piece of trim on the top hem of the apron.
Cut a piece of fabric 2” by the width of the apron plus 1”.If the apron is 8” wide the piece will be 2” by 9”.Fold a ½” hem to the wrong side on the two short ends.Fold the trim in half lengthwise and press.This forms a centerline.Fold and press the long sides to the centerline, fold in half againto create the trim.Pin the trim in place and top stitch using the same decorativestitch as the ties.
Related Documents
