YSI Advancements in Monitoring & Control Technology Webinar 1213

YSI Aquaculture Monitoring & Control

Technologies

Outline of Topics

Product Line Overview Sensor Options Dissolved Oxygen Technology Redundancy, System Security and

Flexibility Integration with other Devices Feed Smart Alarming Communication and Remote Data Options AquaManager Desktop Software AquaViewer App

© 2013 YSI Incorporated

Models 5200A, 5400 and 5500D (M&C)

Multiparameter; DO, pH, Cond, Salinity, ORP (Redox), Temp. 5200A-AC or DC

Multichannel (4) DO 5400-AC or DC

ysi.com/5200A ysi.com/5400

ysi.com/5500D

Multichannel (1 to 4) optical DO 5500D-01-AC or DC 5500D-02-AC or DC 5500D-04-AC or DC


http://www.ysi.com/5200A

http://www.ysi.com/5400

http://www.ysi.com/5500

Sensor Options Standard Multiparameter; dissolved oxygen,

conductivity, pH, ORP (Redox) and temperature

Dissolved Oxygen; electrochemical (galvanic or polarographic) and optical dissolved oxygen sensors

Auxiliary Any sensor with digital or an analog output; 4-

20ma, 0-1 VDC, 0-5 VDC • Flow • Level • CO2 • Ozone • UV Transmittance


Multiparameter

Optical Dissolved Oxygen

Galvanic Dissolved Oxygen

ProODO® Probe

Temperature sensor Sensor Cap

with ≈ 12 to18 month life


Measuring Dissolved Oxygen Optically

Oxygen is constantly moving through the Diffusion Layer, affecting the luminescence of the sensing layer.

The amount of oxygen passing through the sensing layer is inversely proportional to the lifetime of the luminescence in the sensing layer.

The lifetime of the luminescence is measured by the sensor and compared against the reference.


Flow Dependence

Flow Stopped


Flow Dependence Continued

Flow Stopped


Optical Dissolved Oxygen Advantages Optical Dissolved Oxygen Technology can save you $$$

Higher accuracy • No stirring/flow required to achieve accurate

measurements • Maintain healthy levels of O2 while saving on aeration

and/or oxygen costs

Low maintenance • No electrodes to clean • No regular membrane changes • Extremely stable long term so no need for frequent

calibrations

Not affected by Hydrogen Sulfide or other gasses


Redundancy, System Security and Flexibility Measurement and control functions managed at the

instrument level. No risk of complete network/system failure.

Password protected functions Tank side display for easy use and calibration AC units automatically switch to DC backup power when

AC mains power goes down. An Email or SMS message will be sent.

Alarms on loss of networked slave devices Fully user configurable and scalable – fits any operation

without custom programming and can be easily modified by the user as their needs change.


YSI M&C and PLC Systems

YSI M&C products can be easily

integrated into systems using PLCs via RS-232 or Ethernet communication.

A hybrid approach - the YSI M&C product performs some process control and some process control is performed by the PLC.

Allows the integrator or customer to develop their own custom software solution if desired.


Feed Smart™ Conditional Feed Timer

Manages feed delivery: Simple, one-step calibration

process Up to 100 feedings per day Decrease feed amount by

user defined % based on DO and Temperature values (also, pH values on the 5200A)

Increases feed amount on a daily basis by user defined FCR


bit.ly/FeedSmart

http://bit.ly/FeedSmart

Feed Smart™ Conditional Feed Timer

Day 1 Day 2 Day 3 Day 4 Day 5 Day 6 Day 7

Feed % of Biomass (user entered value) 4.00% 4.00% 4.00% 4.00% 4.00% 4.00% 4.00%

Biomass (enter beginning value only) 2500.0 2566.7 2635.1 2705.4 2777.5 2851.6 2927.6

Daily Feed Amount (system calculated) 100.0 102.7 105.4 108.2 111.1 114.1 117.1

Cumulative Feed Amount (system calculated) 100.0 202.7 308.1 416.3 527.4 641.5 758.6

FCR Factor x.x to 1.0 (user entered value) 1.5

Make FCR a decimal (system calculated) 0.67

Increase in Biomass (system calculated) 66.7 68.4 70.3 72.1 74.1 76.0 78.1

Cumulative Biomass Increase (system calculated) 66.7 135.1 205.4 277.5 351.6 427.6 505.7

Calculated New Biomass 2566.7 2635.1 2705.4 2777.5 2851.6 2927.6 3005.7

Example Calculation Chart


bit.ly/FeedSmart

http://bit.ly/FeedSmart

Alarms

General Alarm Ability to configure a single relay to control light or

siren based on any alarm condition Alarm Conditions Parameter out of range Power outage; loss of AC

power and low DC voltage Loss of slave Loss of ODO communication Alarm Hold Off When enabled, acts as a filter

for false alarms © 2013 YSI Incorporated

E-mail and SMS Alarming [email protected] Date: Wed 04 Dec 2013 18:10:46 Subject: AutoPoller Alarm Message YSI5200A Alarm Tilapia Tank #1 DO Low Alarm: 4.50 mg/L

Alarms


Networking and Communication Options








AquaManager Software

Data Management Graphing Data export Event logging Manual data entry

System Management Explorer based network setup and support E-mail and SMS setup Set-point and control management


Mapping Screen

• Gives a quick visual of the entire operation

• Images include animations

• Easy for user to set up


Event Logging


Event Logging


AquaViewer Apple Device App

Set up screen #1 Set up screen #2 Network Viewer screen: • Normal • Control in yellow • Alarms in red

Instrument Viewer screen: • Normal in green • Control in yellow • Alarms in red

• iPhone • iPad • iPod Touch (generation #3 or higher)



Wrap Up

So, why choose YSI? Proven and trusted

technology Global presence Provide solutions that

make you more productive Professional support

Questions? © 2013 YSI Incorporated

YSI Advancements in Monitoring & Control Technology Webinar 1213

Technology

com5400 ysi

com5200a ysi

ysi incorporatedmultichannel

ysi incorporatedthe

d mc ysi

ysi incorporatedsensor

communication options

plc systems ysi mc products