Sheet1QUOTED BY:-M/S Shivam Engineers,818-Laxmideep
Building,District centre,Vikas Marg,Delhi-110092QUOTED FOR:-M/S
Kinden India Pvt.Ltd.GurgaonPROJECT:-M/S YKK
INDIA,BAWAL(Haryana)BILL OF MATERIALS31.05.2013Sr.
No.DescriptionUnitQtySupplyInstallationUnit PriceUnit TotalUnit
PriceUnit TotalIPHASE - I : REMOVING WORKS.
1POWER for MACHINE :1.1Removal the existing Power distribution
panel PCC-3 at Phase -I
area(w:2400,h:2000,d:400)Job10.012,500.0012,500.000.00.02LIGHTING
SYSTEM :0.00.02.1Removal the existing Lighting distribution panel
LCC-1 at Phase -I area, after removing the Incoming and Outgoing
cable terminations and storing the panel in a separate location.
0.00.0Incoming cable : 3.5c x 120 sq.mm Alu. Ar Cable
0.00.0Outgoing cables / Wires : 3R, 2.5 Sq.mm Copper flexible cable
in conduit / Raceways. - 11 Circuits0.00.0Outgoing cables / Wires :
3R, 4.0 Sq.mm Copper flexible cable in condduit / Raceways. - 3
CircuitsJob10.020,000.0020,000.000.00.02.2Removal the existing
Lighting distribution panels LCC-2 at Phase - I area, after
removing the Incoming and Outgoing cable terminations and storing
the panel in a separate location. 0.00.0Incoming cable : 3.5c x 120
sq.mm Alu. Ar Cable 0.00.0Outgoing cables / Wires : 3R, 2.5 Sq.mm
Copper flexible cable in conduit / Raceways. - 13
Circuits0.00.0Outgoing cables / Wires : 3R, 4.0 Sq.mm Copper
flexible cable in condduit / Raceways. - 8 Circuits0.00.0Outgoing
cables / Wires : 4c x 6.0 Sq.mm Copper cable in conduit / Raceways.
- 1 CircuitJob10.025,000.0025,000.000.00.02.3Removal the existing
Lighting distribution panels LCC-3 at Phase - I area, after
removing the Incoming and Outgoing cable terminations and storing
the panel in a separate location. 0.00.0Incoming cable : 3.5c x 120
sq.mm Alu. Ar Cable 0.00.0Outgoing cables / Wires : 3R, 2.5 Sq.mm
Copper flexible cable in conduit / Raceways. - 10
Circuits0.00.0Outgoing cables / Wires : 3R, 4.0 Sq.mm Copper
flexible cable in condduit / Raceways. - 4 Circuits0.00.0Outgoing
cables / Wires : 4c x 6.0 Sq.mm Copper cable in conduit / Raceways.
- 1 CircuitJob10.020,000.0020,000.000.00.02.4Removing of the 50mm x
50 mm x 2400mm (Length) MS sheet steel Powder coated Race way
covers for removing the lighting wirings laid in the raceways and
storing them in a safe work
place.Mtrs13550.075.00101,625.000.00.02.5Removing of the 3 runs of
2.5 Sq.mm Copper flexible wires in Race ways for lighting circuits,
removing the terminations in the fittings and
storing.Mtrs24200.015.0036,300.000.00.02.6Removing the Flourscent
tube, Reflector and the cover of the light fixtures for
disconnecting the circuit wires and storing them in a safe working
place.Nos3650.0125.0045,625.000.00.03POWER SOCKET SYSTEM
:0.00.03.1Removing the existing power socket wiring in 25mm dia GI
pipe with 3runs of 4.0 Sq.mm copper wires from LCC panels - 1,2
& 3 which is clamped along the wall / RSJ Coloumns
etc.,Mtrs6650.030.0019,950.000.00.03.2Removing the existing power
socket wiring in 32mm dia GI pipe with 4c x 6 Sq.mm copper cable
from LCC panels - 1,2 & 3 which is clamped along the wall / RSJ
Coloumns etc.,Mtrs1500.035.005,250.000.00.03.3Removing the existing
1 Gang, Single Phase 6/16A, receptacle mounted in Thermoplastic
plate GI Box - Plug and socket outlets mounted over wall surface /
RSJ Coloumns etc., Nos10.075.0075.000.00.03.4Removing the existing
2 Gang, Single Phase 6/16A, receptacle mounted in Thermoplastic
plate with GI Box - Plug and socket outlets mounted over wall
surface / RSJ Coloumns etc.,
Nos230.0100.002,300.000.00.03.5Removing the existing Three Phase
63A, 5 Pin rotary type Industrial socket with 4P MCB and 20A,
Single Phase rotary type industrial soccket with DP MCB in a powder
coated enclosure box. Nos40.0200.00800.000.00.03.6Finishing the
surface of the existing Plug & Socket mounted area and
repainting the surface and making the surface good. (In Civil Scope
)Nos28CIVIL SCOPE0.00.00.04EMERGENCY & EXIT LIGHTING SYSTEM :
0.00.04.1Removing the existing Emergency lights mounted over wall
surface / Coloumns / From ceiling and storing in a safe
workplace.Nos340.0125.004,250.000.00.04.2Removing the existing
Emergency lighting wiring with 3 Runs of 2.5 Sq.mm copper wires in
25mm dia GI pipe / Raceways / clamped along the wall / RSJ Coloumns
etc.,Mtrs5000.030.0015,000.000.00.04.3Removing the existing Exit
lights / Exit Indicators mounted over wall surface / Coloumns /
From ceiling and storing in a safe
workplace.Nos130.0100.001,300.000.00.04.4Removing the existing Exit
lighting wiring with 3 Runs of 2.5 Sq.mm copper wires laid in 25mm
dia GI pipe / Raceways clamped along the wall / ceiling / RSJ
Coloumns etc.,Mtrs3450.030.0010,350.000.00.0IIPHASE - I : SUPPLY
& INSTALLATION WORKS.0.00.00.00.01POWER for MACHINE
:0.00.01.1LV Power Panel : PP-10.00.0Supply, Installation, Testing
and Commissioning of 415V, 3Phase, 4 Wire sheet steel fabricated,
dust and vermin proof, Cubicle, Indoor type, free standing floor
mounted expandable type fabricated out of 1.6mm CRCA sheet steel
complete with 200A, Aluminium Busbars, Adequate cable alley for
terminating Incoming and Outgoing cables with detachable Gland
plates, complete terminal block arrangement with ferrule markings,
Space Heater, Proper ventillation arrangements complete with powder
coated finish and comprising of.,0.00.0Incoming : 160A, 4P MCCB
with microprocessor based O/C relay, with On/OFF and Phase
Indication lamps. 0.00.0Meterings: Digital Multi function meter
with 3 Nos 200/5A,15VA, Cl:1 CT, Control wirings and control MCB's
(Schneider Power logic series : PM850)0.00.0Busbars : 200A, 3 Phase
Aluminium Busbars with heat shrikable coloured sleeves.
0.00.0Outgoings :16 Nos, 63A, TP&N MCB with 4R, 16 Sq.mm Copper
wires wired to the outgoing terminal blocks at cable ally.
Nos1227,200.00227,200.0012,500.0012,500.000.00.01.2LV Power Panel :
PP-20.00.0Supply, Installation, Testing and Commissioning of 415V,
3Phase, 4 Wire sheet steel fabricated, dust and vermin proof,
Cubicle, Indoor type, free standing floor mounted expandable type
fabricated out of 1.6mm CRCA sheet steel complete with 250A,
Aluminium Busbars, Adequate cable alley for terminating Incoming
and Outgoing cables with detachable Gland plates, complete terminal
block arrangement with ferrule markings, Space Heater, Proper
ventillation arrangements complete with powder coated finish and
comprising of.,0.00.0Incoming : 250AF/200AT, 4P MCCB with
microprocessor based O/C relay, with On/OFF and Phase Indication
lamps. 0.00.0Meterings: Digital Multi function meter with 3 Nos
250/5A,15VA, Cl:1 CT, Control wirings and control MCB's (Schneider
Power logic series : PM 850)0.00.0Busbars : 250A, 3 Phase Aluminium
Busbars with heat shrikable coloured sleeves. 0.00.0Outgoings :22
Nos, 63A, TP&N MCB with 4R, 16 Sq.mm Copper wires wired to the
outgoing terminal blocks at cable ally.
Nos1255,000.00255,000.0012,500.0012,500.000.00.01.3LV Power Panel :
PP-30.00.0Supply, Installation, Testing and Commissioning of 415V,
3Phase, 4 Wire sheet steel fabricated, dust and vermin proof,
Cubicle, Indoor type, free standing floor mounted expandable type
fabricated out of 1.6mm CRCA sheet steel complete with 100A,
Aluminium Busbars, Adequate cable alley for terminating Incoming
and Outgoing cables with detachable Gland plates, complete terminal
block arrangement with ferrule markings, Space Heater, Proper
ventillation arrangements complete with powder coated finish and
comprising of.,0.00.0Incoming : 100A, 4P MCCB with microprocessor
based O/C relay, with On/OFF and Phase Indication lamps.
0.00.0Meterings: Digital Multi function meter with 3 Nos
100/5A,15VA, Cl:1 CT, Control wirings and control MCB's (Schneider
Power logic series : PM 850)0.00.0Busbars : 100A, 3 Phase Aluminium
Busbars with heat shrikable coloured sleeves. 0.00.0Outgoings :9
Nos, 63A, TP&N MCB with 4R, 16 Sq.mm Copper wires wired to the
outgoing terminal blocks at cable ally.
Nos1203,000.00203,000.0011,500.0011,500.000.00.01.4Supply and
Installation of Feeder Box for LV Busbar Trunking system (Make: M/s
EAE Cat no.KAP0605BB)
Nos363,100.00111,600.00650.0023,400.000.00.01.5Supply,
Installation, Testing and Commissioning of LV Busbar Trunking
system ( Make: M/s EAE, Cat no.KAP0604)
Nos1448,715.001,254,960.00600.0086,400.000.00.01.6Supply and
Installation of End Box for LV Busbar trunking system (Make: M/s
EAE, Cat
no.KAP0605BS)Nos363,100.00111,600.00300.0010,800.000.00.01.7Supply,
Installation of Tap Off Plug for the LV Busbar Trunking system
(Make: M/s EAE Cat
no.KAP16-KL123)Nos1921,500.00288,000.00150.0028,800.000.00.01.8Supply
and installation of suitable supporting Material with drop rod
arrangement from roofing supports for the LV Busbar trunking system
(The distance between supports should be maintained within
1500mm)Lot1150,000.00150,000.0015,000.0015,000.000.00.01.9Supply
and Laying of 10 Sq.mm Copper flexible cable for earthing from
cable tray to the Busbar Trunking system along with the respective
power cable. Mtrs183592.00168,820.0020.0036,700.001.10Supply and
tagging of cable tie for
WiresLot13,500.003,500.002,500.002,500.000.00.01.11Supply, Laying,
testing and Commissioning of the following 1.1kV Grade XLPE
insulated, PVC sheathed , armoured cable in existing cable trays
and clamping.0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar PVC
cableMtrs1470633.00930,510.0050.0073,500.00b) 3.5c x 50 Sq.mm Al
XLPE Ar PVC cableMtrs315226.0071,190.0075.0023,625.00c) 3.5c x 150
Sq.mm Al XLPE Ar PVC cableMtrs730580.00423,400.00110.0080,300.00d)
Supply and fixing of cable identification tags at both Panel and at
load ends of the cable.Lot15,000.005,000.002,500.002,500.00e)
Supply and Installation of supporting Material for LT Cables over
Cable tray / from the roof level angular
supports.Lot15,000.005,000.003,500.003,500.000.00.01.12Supply and
making terminations for the following 1.1kV Grade XLPE Insulated
PVC sheathed cables using Double Compression cable glands, Copper /
Aluminium Lugs, fastening with G.I hardwares with proper colour
coded insulating sleeves at cable ends. 0.00.0a) 4c x 16 Sq.mm Cu
XLPE Ar PVC cableSets36350.0012,600.00100.003,600.00b) 3.5c x 50
Sq.mm Al XLPE Ar PVC cableSets2570.001,140.00125.00250.00c) 3.5c x
150 Sq.mm Al XLPE Ar PVC
cableSets41,095.004,380.00175.00700.000.00.01.13Supply and
Installation of the following Hot dip Galvanized Perforated type
cable tray including fittings such as coupling plates, Pre
fabricated bends, Tee's , Reducers and Angular offset sections
etc.,0.00.0a) 150mm x 50mm x 2.0mm (Thick) cable
TrayMtrs125538.0067,250.00125.0015,625.00b) 200mm x 50mm x 2.0mm
(Thick) Cable TrayMtrs15645.009,675.00125.001,875.00c) Supporting
Material for Cable tray from exisitng roof level angles using G I
threaded rods / angle frames, clamping arrangements
etc.,Lot125,000.0025,000.005,000.005,000.000.00.02LIGHTING SYSTEM
:0.00.02.1LV Lighting Panel : LCC-1 & LCC-20.00.0Supply,
Installation, Testing and Commissioning of 415V, 3Phase, 4 Wire
sheet steel fabricated, dust and vermin proof, Cubicle, Indoor
type, free standing floor mounted expandable type fabricated out of
1.6mm CRCA sheet steel complete with 100A, Aluminium Busbars,
Adequate cable alley for terminating Incoming and Outgoing cables
with detachable Gland plates, complete terminal block arrangement
with ferrule markings, Space Heater, Proper ventillation
arrangements complete with powder coated finish and comprising
of.,0.00.0Incoming : 100A, 4P MCCB with microprocessor based O/C
relay, with On/OFF and Phase Indication lamps. 0.00.0Meterings:
Digital Multi function meter with 3 Nos 100/5A,15VA, Cl:1 CT,
Control wirings and control MCB's0.00.0Busbars : 100A, 3 Phase
Aluminium Busbars with heat shrikable coloured sleeves.
0.00.0Outgoings :21 Nos, 20A, DP MCB with 3R, 2.5 Sq.mm Copper
wires wired to the outgoing terminal blocks at cable ally. (Each 7
Nos MCB Outgoings has to be segregated in separate chamber for each
phase)0.00.0Note : A separate chamber for outgoing circuits to be
provided with 16Nos, 2 Way , 16A Modular switches as per enclosed
SLD .Nos2198,200.00396,400.0011,500.0023,000.000.00.02.2LV Lighting
Panel : LCC-30.00.0Supply, Installation, Testing and Commissioning
of 415V, 3Phase, 4 Wire sheet steel fabricated, dust and vermin
proof, Cubicle, Indoor type, free standing floor mounted expandable
type fabricated out of 1.6mm CRCA sheet steel complete with 100A,
Aluminium Busbars, Adequate cable alley for terminating Incoming
and Outgoing cables with detachable Gland plates, complete terminal
block arrangement with ferrule markings, Space Heater, Proper
ventillation arrangements complete with powder coated finish and
comprising of.,0.00.0Incoming : 100A, 4P MCCB with microprocessor
based O/C relay, with On/OFF and Phase Indication lamps.
0.00.0Meterings: Digital Multi function meter with 3 Nos
100/5A,15VA, Cl:1 CT, Control wirings and control
MCB's0.00.0Busbars : 100A, 3 Phase Aluminium Busbars with heat
shrikable coloured sleeves. 0.00.0Outgoings :25 Nos, 20A, DP MCB
with 3R, 2.5 Sq.mm Copper wires wired to the outgoing terminal
blocks at cable ally. (Each 9/8 Nos MCB Outgoings has to be
segregated in separate chamber for each phase: Refer SLD)0.00.0Note
: A separate chamber for outgoing circuits to be provided with 16
Nos, 2 Way , 16A Modular switches as per enclosed SLD
.Nos1197,000.00197,000.0011,500.0011,500.000.00.02.3Supply, Testing
, Installation and commissioning of 36W x 2 Industrial type
Flourscent lamp with Reflector and tubes. Make : Phillips, Cat No:
TMC 055(2x36W)
EBTNos221,895.0041,690.00175.003,850.000.00.02.4Supply and fixing
of supporting materials for lighting fixtures such as clamps and
hardwares.Lot14,000.004,000.002,000.002,000.000.00.02.5Supply,
Fixing and connecting of 2 Way, 16A, Modular type switch with 1
Module Plate and 1 Module Zinc Chromate MS Box. Make : MK
.Nos47325.0015,275.0075.003,525.000.00.02.6Supply and laying of
3Runs, 2.5 Sq.mm FRLS PVC Insulated copper Wires in raceways for
lighting wiring.Mtrs506577.00390,005.0015.0075,975.002.7Tagging for
WiresLot14,500.004,500.003,000.003,000.000.00.02.8Supply &
Installation of 50 x 50 x 1.6mm (Thick) MS sheet steel fabricated,
Powder coated Raceway for lighting wiring with detachable side
cover provision.Mtrs300335.00100,500.0075.0022,500.002.9Supply and
Installaiton of Fittings such as 'L' Bends , Tee's, and couplings
for Raceway.Lot115,000.0015,000.005,000.005,000.002.10Supply and
Fixing of raceway supporting Material such as clamps, Threaded drop
rods and Angular supports
etc.,Lot125,000.0025,000.007,500.007,500.000.00.03POWER SOCKET
SYSTEM :0.00.03.1Supply and Installation of Power Socket outlet of
240V 2P+E 6A/16A 1 Gang with 1M odule Switch,2Module Socket,
4Module Plate and Zinc Chromate MS
Box.Nos27504.0013,608.0075.002,025.003.2Supplyand Installation of 3
Phase Power Socket outlet 63A, 415V 3P+E Plug and socket with 63A,
TP MCB in metal clad
enclosure.Nos29,425.0018,850.00950.001,900.000.00.03.3Supply,
Laying and Terminating of 3R, 4 Sq.mm FRLS PVC Insulated Copper
flexible cable for Power socket outlets with suitable copper
thimbles.Mtrs985111.00109,335.0015.0014,775.003.4Supply and fixing
of Tagging materials for
WiresLot12,000.002,000.002,000.002,000.000.00.03.5Supply, Laying,
testing and Commissioning of the following 1.1kV Grade XLPE
insulated, PVC sheathed , armoured cable in existing cable trays
and clamping.0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar PVC cable)
Mtrs115633.0072,795.0050.005,750.00b) Supply and fixing of cable
identification tags at both Panel and at load ends of the
cable.Lot11,580.001,580.00500.00500.00c) Supply and Installation of
supporting Material for LT Cables over Cable tray / from the roof
level angular
supports.Lot13,500.003,500.002,000.002,000.000.00.03.6Supply and
making terminations for the following 1.1kV Grade XLPE Insulated
PVC sheathed cables using Double Compression cable glands, Copper
Lugs, fastening with G.I hardwares with proper colour coded
insulating sleeves at cable ends. 0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar
PVC cableSets4350.001,400.00100.00400.000.00.03.7Supply and Laying
of 25mm Dia, 1.6mm Thick G.I conduit pipe for 240V Power socket
wiring with accessories such as Bends, Junction boxes, Couplings
and saddles etc.,Mtrs895195.00174,525.0030.0026,850.003.8Supply and
Laying of 40mm Dia, 2.0mm Thick G.I conduit pipe for 415V Power
socket wiring with accessories such as Bends, Junction boxes,
Couplings and saddles
etc.,Mtrs8470.003,760.0050.00400.000.00.0IIIPHASE - III : REMOVING
WORKS at N2, S2 AREA:0.00.00.00.01POWER DISTRIBUTION FOR MACHINES
:0.00.01.1Removing of the existing Bus Trunking system for machines
and its supports mounted from roof level.0.00.0a) 63A, 4P, BT No:
02, Fed from PP-12AMtrs480.0150.007,200.00b) 63A, 4P, BT No: 01,
Fed from PP-12Mtrs120.0150.001,800.00c) 63A, 4P, BT No: 56, Fed
from PP-12Mtrs210.0150.003,150.00d) 63A, 4P, BT No: 57, Fed from
PP-12Mtrs120.0150.001,800.00e) 63A, 4P, BT No: 58, Fed from
PP-12Mtrs210.0150.003,150.00f) 63A, 4P, BT No: 60, Fed from
PP-12Mtrs0.50.0150.0075.00g) 63A, 4P, BT No: 61, Fed from
PP-12Mtrs210.0150.003,150.00h) 63A, 4P, BT No: 62, Fed from
PP-12Mtrs210.0150.003,150.00i) 63A, 4P, BT No: 63, Fed from
PP-12Mtrs120.0150.001,800.00j) 63A, 4P, BT No: 64, Fed from
PP-12Mtrs210.0150.003,150.00k) 63A, 4P, BT No: 65, Fed from
PP-12Mtrs120.0150.001,800.00l) 63A, 4P, BT No: 31, Fed from
PP-11Mtrs180.0150.002,700.00m) 63A, 4P, BT No: 32, Fed from
PP-11Mtrs150.0150.002,250.00n) 63A, 4P, BT No: 33, Fed from
PP-11Mtrs60.0150.00900.00o) 63A, 4P, BT No: 34, Fed from
PP-11Mtrs180.0150.002,700.00p) 63A, 4P, BT No: 35, Fed from
PP-11Mtrs150.0150.002,250.00q) 63A, 4P, BT No: 36, Fed from
PP-11Mtrs60.0150.00900.00r) 63A, 4P, BT No: 49, Fed from
PP-11AMtrs90.0150.001,350.00s) 63A, 4P, BT No: 50, Fed from
PP-11AMtrs300.0150.004,500.00t) 63A, 4P, BT No: 51, Fed from
PP-11AMtrs90.0150.001,350.00u) 63A, 4P, BT No: 52, Fed from
PP-11AMtrs90.0150.001,350.00v) 63A, 4P, BT No: 53, Fed from
PP-11AMtrs300.0150.004,500.00w) 63A, 4P, BT No: 54, Fed from
PP-11AMtrs300.0150.004,500.00x) 63A, 4P, BT No: 30&34, Fed from
PP-10Mtrs300.0150.004,500.004270.00.01.2Removing of the existing 4c
x 16 Sq.mm Al Ar cable feeding the bus trunking from cable tray /
supporting from roof.Mtrs10320.050.0051,600.000.00.01.3Removing the
terminations of 4c x 16 Sq.mm Aluminium ar cable at panel and at
Bus Trunking end.Nos500.0100.005,000.000.00.02LIGHTING SYSTEM
:0.00.02.1Removing of the 50mm x 50 mm x 2400mm (Length) MS sheet
steel Powder coated Race way covers for removing the lighting
wirings laid in the raceways and storing them in a safe work
place.Mtrs9520.075.0071,400.000.00.02.2Removing of the 3 runs of
2.5 Sq.mm Copper flexible wires in Race ways for lighting circuits,
removing the terminations in the fittings and
storing.Mtrs21760.015.0032,640.000.00.02.3Removing the Flourscent
tube, Reflector and the cover of the light fixtures for
disconnecting the circuit wires and storing them in a safe working
place.Nos3360.0125.0042,000.000.00.0IVPHASE - III : SUPPLY &
INSTALL WORKS at PF ASSY AREA.0.00.00.00.01POWER for MACHINE
:0.00.01.1Supply and Installation of Feeder Box for LV Busbar
Trunking system (Make: M/s EAE Cat no.KAP0605BB)
Nos353,100.00108,500.00650.0022,750.000.00.01.2Supply,
Installation, Testing and Commissioning of LV Busbar Trunking
system ( Make: M/s EAE, Cat no.KAP0604)
Nos1818,715.001,577,415.00600.00108,600.000.00.01.3Supply and
Installation of End Box for LV Busbar trunking system (Make: M/s
EAE, Cat
no.KAP0605BS)Nos353,100.00108,500.00300.0010,500.000.00.01.4Supply,
Installation of Tap Off Plug for the LV Busbar Trunking system
(Make: M/s EAE Cat
no.KAP16-KL123)Nos2351,500.00352,500.00150.0035,250.000.00.01.5Supply
and installation of suitable supporting Material with drop rod
arrangement from roofing supports for the LV Busbar trunking system
(The distance between supports should be maintained within
1500mm)Lot1185,000.00185,000.0020,000.0020,000.000.00.01.6Supply
and Laying of 10 Sq.mm Copper flexible cable for earthing from
cable tray to the Busbar Trunking system along with the respective
power cable. Mtrs183592.00168,820.0020.0036,700.001.7Supply and
tagging of cable tie for
WiresLot13,500.003,500.002,500.002,500.000.00.01.8Supply, Laying,
testing and Commissioning of the following 1.1kV Grade XLPE
insulated, PVC sheathed , armoured cable in existing cable trays
and clamping.0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar PVC
cableMtrs1870633.001,183,710.0050.0093,500.000.00.0b) Supply and
fixing of cable identification tags at both Panel and at load ends
of the cable.Lot13,500.003,500.002,000.002,000.000.00.0c) Supply
and Installation of supporting Material for LT Cables over Cable
tray / from the roof level angular
supports.Lot14,000.004,000.003,500.003,500.000.00.01.9Supply and
making terminations for the following 1.1kV Grade XLPE Insulated
PVC sheathed cables using Double Compression cable glands, Copper
Lugs, fastening with G.I hardwares with proper colour coded
insulating sleeves at cable ends. 0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar
PVC cableSets38350.0013,300.00100.003,800.000.00.01.10Supply and
Installation of the following Hot dip Galvanized Perforated type
cable tray including fittings such as coupling plates, Pre
fabricated bends, Tee's , Reducers and Angular offset sections
etc.,0.00.0a) 150mm x 50mm x 2.0mm (Thick) cable
TrayMtrs95538.0051,110.00125.0011,875.00b) 200mm x 50mm x 2.0mm
(Thick) Cable TrayMtrs25645.0016,125.00125.003,125.00c) Supporting
Material for Cable tray from exisitng roof level angles using G I
threaded rods / angle frames, clamping arrangements
etc.,Lot117,000.0017,000.003,000.003,000.000.00.02LIGHTING SYSTEM
:0.00.02.1Supply, Testing , Installation and commissioning of 36W x
2 Industrial type Flourscent lamp with Reflector and tubes. Make :
Phillips, Cat No: TMC 055(2x36W)
EBTNos201,895.0037,900.00175.003,500.000.00.02.2Supply and fixing
of supporting materials for lighting fixtures such as clamps and
hardwares.Lot13,500.003,500.002,000.002,000.000.00.02.3Supply,
Fixing and connecting of 2 Way, 16A, Modular type switch with 1
Module Plate and 1 Module Zinc Chromate MS Box. Make : MK
.Nos60325.0019,500.0075.004,500.000.00.02.4Supply and laying of
3Runs, 2.5 Sq.mm FRLS PVC Insulated copper Wires in raceways for
lighting wiring.Mtrs986077.00759,220.0015.00147,900.002.5Tagging
for WiresLot15,000.005,000.003,500.003,500.000.00.02.6Supply &
Installation of 50 x 50 x 1.6mm (Thick) MS sheet steel fabricated,
Powder coated Raceway for lighting wiring with detachable side
cover provision.Mtrs115335.0038,525.0075.008,625.000.00.02.7Supply
and Installaiton of Fittings such as 'L' Bends , Tee's, and
couplings for
Raceway.Lot110,000.0010,000.004,000.004,000.000.00.02.8Supply and
Fixing of raceway supporting Material such as clamps, Threaded drop
rods and Angular supports
etc.,Lot120,000.0020,000.006,500.006,500.000.00.0VPHASE - III :
REMOVING WORKS at N1, S1 AREA:0.00.00.00.01POWER DISTRIBUTION FOR
MACHINES :0.00.01.1Removing of the existing Bus Trunking system for
machines and its supports mounted from roof level.0.00.0a) 63A, 4P,
BT No: 03, Fed from PP-9AMtrs150.0150.002,250.00b) 63A, 4P, BT No:
04, Fed from PP-9AMtrs120.0150.001,800.00c) 63A, 4P, BT No: 5, Fed
from PP-9AMtrs120.0150.001,800.00d) 63A, 4P, BT No: 6, Fed from
PP-9AMtrs150.0150.002,250.00e) 63A, 4P, BT No: 7, Fed from
PP-10Mtrs180.0150.002,700.00f) 63A, 4P, BT No: 17, Fed from
PP-10AMtrs10.0150.00150.00g) 63A, 4P, BT No: 15, Fed from
PP-9AMtrs120.0150.001,800.00h) 63A, 4P, BT No: 16, Fed from
PP-9AMtrs120.0150.001,800.00i) 63A, 4P, BT No: 13, Fed from
PP-9AMtrs150.0150.002,250.00j) 63A, 4P, BT No: 14, Fed from
PP-9AMtrs150.0150.002,250.00k) 63A, 4P, BT No: 12, Fed from
PP-9Mtrs90.0150.001,350.00l) 63A, 4P, BT No: 37, Fed from
PP-9AMtrs90.0150.001,350.00m) 63A, 4P, BT No: 18, Fed from
PP-10AMtrs360.0150.005,400.00n) 63A, 4P, BT No: 38, Fed from
PP-9AMtrs180.0150.002,700.00o) 63A, 4P, BT No: 19, Fed from
PP-10AMtrs300.0150.004,500.00p) 63A, 4P, BT No: 01, Fed from
PP-9Mtrs180.0150.002,700.00q) 63A, 4P, BT No: 02, Fed from
PP-9Mtrs120.0150.001,800.00r) 63A, 4P, BT No: 08, Fed from
PP-9Mtrs150.0150.002,250.00s) 63A, 4P, BT No: 09, Fed from
PP-9Mtrs150.0150.002,250.00t) 63A, 4P, BT No: 10, Fed from
PP-9Mtrs150.0150.002,250.00u) 63A, 4P, BT No: 11, Fed from
PP-9Mtrs90.0150.001,350.00v) 63A, 4P, BT No: 40, Fed from
PP-9Mtrs180.0150.002,700.00w) 63A, 4P, BT No: 16, Fed from
PP-10Mtrs150.0150.002,250.00x) 63A, 4P, BT No: 29, Fed from
PP-9Mtrs150.0150.002,250.00y) 63A, 4P, BT No: 37, Fed from
PP-11Mtrs180.0150.002,700.00z) 63A, 4P, BT No: 25, Fed from
PP-10Mtrs180.0150.002,700.00aa) 63A, 4P, BT No: 21, Fed from
PP-10Mtrs180.0150.002,700.00ab) 63A, 4P, BT No: 22, Fed from
PP-10Mtrs120.0150.001,800.00ac) 63A, 4P, BT No: 23, Fed from
PP-10Mtrs180.0150.002,700.00ad) 63A, 4P, BT No: 24, Fed from
PP-10Mtrs180.0150.002,700.00ae) 63A, 4P, BT No: 27, Fed from
PP-10Mtrs60.0150.00900.00af) 63A, 4P, BT No: 28, Fed from
PP-10Mtrs90.0150.001,350.004860.00.00.00.01.2Removing of the
existing 4c x 16 Sq.mm Al Ar cable feeding the bus trunking from
cable tray / supporting from
roof.Mtrs16750.050.0083,750.000.00.01.3Removing the terminations of
4c x 16 Sq.mm Aluminium ar cable at panel and at Bus Trunking
end.Nos640.0100.006,400.000.00.02LIGHTING SYSTEM :0.00.02.1Removing
of the 50mm x 50 mm x 2400mm (Length) MS sheet steel Powder coated
Race way covers for removing the lighting wirings laid in the
raceways and storing them in a safe work
place.Mtrs19400.075.00145,500.000.00.02.2Removing of the 3 runs of
2.5 Sq.mm Copper flexible wires in Race ways for lighting circuits,
removing the terminations in the fittings and
storing.Mtrs42900.015.0064,350.000.00.02.3Removing the Flourscent
tube, Reflector and the cover of the light fixtures for
disconnecting the circuit wires and storing them in a safe working
place.Nos5880.0125.0073,500.000.00.0VIPHASE - III : SUPPLY &
INSTALLATION WORKS at PF CHAIN AREA.0.00.00.00.01POWER for MACHINE
:0.00.01.1Supply and Installation of Feeder Box for LV Busbar
Trunking system (Make: M/s EAE Cat no.KAP0605BB)
Nos243,100.0074,400.00650.0015,600.000.00.01.2Supply, Installation,
Testing and Commissioning of LV Busbar Trunking system ( Make: M/s
EAE, Cat no.KAP0604)
Nos1078,715.00932,505.00600.0064,200.000.00.01.3Supply and
Installation of End Box for LV Busbar trunking system (Make: M/s
EAE, Cat
no.KAP0605BS)Nos243,100.0074,400.00300.007,200.000.00.01.4Supply,
Installation of Tap Off Plug for the LV Busbar Trunking system
(Make: M/s EAE Cat
no.KAP16-KL123)Nos1361,500.00204,000.00150.0020,400.000.00.01.5Supply
and installation of suitable supporting Material with drop rod
arrangement from roofing supports for the LV Busbar trunking system
(The distance between supports should be maintained within
1500mm)Lot1115,000.00115,000.0012,500.0012,500.000.00.01.6Supply
and Laying of 10 Sq.mm Copper flexible cable for earthing from
cable tray to the Busbar Trunking system along with the respective
power cable. Mtrs114592.00105,340.0020.0022,900.001.7Supply and
tagging of cable tie for
WiresLot13,500.003,500.002,500.002,500.000.00.01.8Supply, Laying,
testing and Commissioning of the following 1.1kV Grade XLPE
insulated, PVC sheathed , armoured cable in existing cable trays
and clamping.0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar PVC
cableMtrs1165633.00737,445.0050.0058,250.00b) Supply and fixing of
cable identification tags at both Panel and at load ends of the
cable.Lot13,500.003,500.002,000.002,000.00c) Supply and
Installation of supporting Material for LT Cables over Cable tray /
from the roof level angular
supports.Lot14,000.004,000.003,500.003,500.000.00.01.9Supply and
making terminations for the following 1.1kV Grade XLPE Insulated
PVC sheathed cables using Double Compression cable glands, Copper
Lugs, fastening with G.I hardwares with proper colour coded
insulating sleeves at cable ends. 0.00.0a) 4c x 16 Sq.mm Cu XLPE Ar
PVC cableSets24350.008,400.00100.002,400.000.00.01.10Supply and
Installation of the following Hot dip Galvanized Perforated type
cable tray including fittings such as coupling plates, Pre
fabricated bends, Tee's , Reducers and Angular offset sections
etc.,0.00.0a) 150mm x 50mm x 2.0mm (Thick) cable
TrayMtrs45538.0024,210.00125.005,625.00b) Supporting Material for
Cable tray from exisitng roof level angles using G I threaded rods
/ angle frames, clamping arrangements
etc.,Lot110,000.0010,000.005,000.005,000.000.00.02LIGHTING SYSTEM
:0.00.02.1Supply, Fixing and connecting of 2 Way, 16A, Modular type
switch with 1 Module Plate and 1 Module Zinc Chromate MS Box. Make
: MK .Nos60325.0019,500.0075.004,500.000.00.02.2Supply and laying
of 3 Runs, 2.5 Sq.mm FRLS PVC Insulated copper Wires in raceways
for lighting
wiring.Mtrs996577.00767,305.0015.00149,475.002.3Tagging for
WiresLot15,000.005,000.003,500.003,500.000.00.02.4Supply &
Installation of 50 x 50 x 1.6mm (Thick) MS sheet steel fabricated,
Powder coated Raceway for lighting wiring with detachable side
cover provision.Mtrs110335.0036,850.0075.008,250.000.00.02.5Supply
and Installation of Fittings such as 'L' Bends , Tee's, and
couplings for
Raceway.Lot110,000.0010,000.004,000.004,000.000.00.02.6Supply and
Fixing of raceway supporting Material such as clamps, Threaded drop
rods and Angular supports
etc.,Lot115,000.0015,000.005,000.005,000.000.00.03.0MISCELLANEOUS
:0.00.00.00.03.1Charges for providing scaffolding / Ladder for
removing and Installation works.Lot10.00.0150,000.00150,000.00
Total:13,756,528.002,781,590.00(Materials prices must be follow
as per terms & conditons)ADD SERVICE TAX ON
[email protected]%343,804.52Grand
Total13,756,528.003,125,394.52TOTAL(SUPPLY+INSTALLATION)16,881,922.5216,375,464.85
&P - &N
Sheet2
Sheet3