year Of Experience in Design and Manufacturing of CNC Horizontal Boring & Milling Machine Conventional Horizontal Boring & Milling Machine UBM series * CNC Horizontal Heavy Duty Milling Machine UMM series CNC Horizontal Machining Center UHM series u Chine U'chine Technology Co., LTD. Chine CNC Horizontal Boring & Milling Machine
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
year
Of Experience inDesign and Manufacturing of
CNC Horizontal Boring
& Milling Machine
Conventional HorizontalBoring & Milling MachineUBM series
*CNC Horizontal Heavy DutyMilling MachineUMM series
Perfectly Designed To OptimizeRigidityAnd Stability
Rigid & Stable StructureAll structural parts are manufactured fromhigh quality cast iron (FC 30), temperedand stress relieved.
Guide WaysBox ways on X and Y-axis.Four linear guide ways on Z-axis.
Large Ball ScrewsX, Y, Z-axis are transmitted through 063 mm,class C3 ball screws, featuringmaximum rigidity.
Finite Element Analysis (FEA)The major structural parts are designedwith Finite Element Analysis software tosimulate stress/strain condition.
Linear Scales on Three AxesX, Y, Z-axis are all equipped with linearscales to ensure high positioning accuracy.
Rigid, Powerful Spindle Head
• The spindle head is reinforced with cage-shaperibs for increased rigidity.
• The spindle head integrates a self-madegearbox in combination with a German gearboxwith 1: 8 teeth ratio, providing greater torqueoutput in heavy cutting.(1:11 low speed teeth ratio is available)
UBM-11020RS
0.001° Direct-Drive Rotary Table
• 0.001° indexing rotary table. (Simultaneously controlledtype is optional)
• 5 tons loading capacity.
• Automatic hydraulic clamping.
• Each 90° positioning with dowel pin.
NOTE: UBM-11020IS is equipped with a 360D teeth positioning table.
J
Fully enclosed splash guard (optional)
U'Chine
UBM-11020RSA
Spindle Speed / Torque Diagram
FANUC A15 / 7000
(RPM)
LOW SPEED
' v, X continuousNqting
(RPM)
HIGH SPEED
UBM-13020RS, 13020IS• Spindle diameter 0130mm.
• Fixed column construction.
ÿW-axis 700mmÿ Large external splash guard (optional)
1. ATC: 60 Tools2. Oil mist device3. Variety of controllers
(FANUC/MELDAS/ SIEMENS /HEIDENHAIN)
4. Various auxiliary work tables5. Air conditioner at the electrical cabinet6. Extension sleeve 250mm/300mm7. Coolant through spindle8. Manual90° angular milling head
• 0.001° indexing direct-drive rotary 1(Simultaneously controlled table is availa
• Table sizes 1400x1600mm.(Various types of table are optional)
• Two box ways on X-axis.(M65 roller type linear ways are optional)
• Two box ways on Y-axis with countbalance weight.
• M65 roller type linear ways on Z-a>(Three linear ways with 4 blocks on each
• Linear scales on 3 axes.(Heidenhain or Schneeberger brand)
• 40-tool magazine is standard.(60-tool or 90-tool magazine is optional)
Rigid, Powerful Spindle Head• The spindle head is reinforced with cage-shape ribs for
increased rigidity.
• The spindle head integrates a self-made gearbox incombination with a German gearbox with 1: 8 teeth ratio,providing greater torque output in heavy cutting.(1:11 low speed teeth ratio is available)
MACHINE SPECIFICATIONS ]: As Optional
MODEL UNIT UBM-11020RT UBM-11025RT UBM-11032RT UBM-11042RT UBM-11020R UBM-11025R UBM-11032R UBM-11042R
TABLE
RAVEL
'INDLE
STANCES
ED RATE
10T0R
ATC
COOLANT &LUBRICATION
MISCELLANEOUS
Table Size
T-slotsSize
Maximum Load
X-Axis
Y-Axis
Z-Axis
W-Axis
Diameter
Speed
Taper
Spindle Centerto Table
Spindle Nose to Table Center
Height From Ground to Table Surface
Rapid Feed RateX/Y/Z
Rapid Feed Rate W
Minimum Setting mm/min
Cutting Feed Rate mm/min
Spindle Servo Motor-cont./30min kW
AxisX/Y/Z/W/ELubricator Motor
Hydraulic Pump
Coolant Pump
Chip Conveyor
Oil Cooler Pump
No. of Tools
Tool Selection
Tool Change Time
Max. Tool-Diameter/ Length
Max. Tool Weight
Coolant Tank Volume
Hydraulic Tank Volume
Lubrication Tank Volume
Power Required
Pressurized Air
mm
mm
kg
mm
mm
mm
mm
mm
rpm
mm
mm
m/min
m/min
kW
kW
kW
kW
kW
kW
pieces
Sec.
mm
kg
L
L
L
kVA
kg/cm:
1400x1600x0.001°
24x7
8000
2000 2500 3200 4200
1800
2000 2500 3200 4200
2000 (2500)
1700
500
0-2500 (3000,4000!
0-1800
0110
7/24 taper IS0.50, BT-50
0-2200
550
0 - 2000 12500)
0 - 2000 12500)
0-2250
1250
10
10
0.001
1-5000
15/18.5 (22/26)
7/4/4/4/7 7/7/7/4/7
0.15
2.25
1.17
0.2
0.75
40 ( 60 )
Absolute
15
0125/0250 (Without Adjacent Tool) / Length400
25
400
80
8
55
l Specifications are subject to change without prior notice.
STANDARD ACCESSORIES : OPTIONAL ACCESSORIES :1. Linearscales on X, Y, 11.Heat exchanger 1. ATC: 60 tools
Zaxes 12. Chip conveyor and cart 2. Oilmist device2. Spindle oilcooler 13. Leveling bolts & pads 3. Variety of controllers IFANUC/ MELDAS3. Automatic power off 14. Controller manualsand circuit /SIEMENS/HEIDENHAIN )
4. Hydraulic system diagram 4. Various auxiliarywork tables5. Coolant system 15. Operation manuals 5. Air conditioner at the electrical cabinet6. Lubricator system 16. Machine inspection lists 6. Extension sleeve 250 / 300mm7. Alarm lamp 17. Splash guards (around the table) 7. Coolant through spindle8. Work lamp 18. Tool box 8. 1800x1600x0.001° rotary table9. M.P.G. 19. FANUC OiMF (Table load 10tons or 20 tons)
ÿ Specifications are subject to change without prior notice.
STANDARD ACCESSORIES :
1. Linear scales on X, Y, Z axes 9. M.P.G. 17. Splash guards (around the table)
2. Spindle oil cooler 10. RS232 interface 18. Toolbox3. Automatic power off 11. Heat exchanger 19. FANUC OiMF
4. Hydraulic system 12. Chip conveyor and cart 20. ATC : 40 Tools5. Coolant system 13. Leveling bolts & pads6. Lubricator system 14. Controller manualsand circuit diagram7. Alarm lamp 15. Operation manuals8. Work lamp 16. Machine inspection lists
MACHINE SPECIFICATIONS = Optional
MODEL UNIT UBM-13032RL UBM-13042RL UBM-13052RL UBM-13062RL UBM-15032RL UBM-15042RL UBM-15052RL UBM-15062RLTable Size mm 2200 x 2500 x 0.001°(2500 x 3000 x 0.001°) 2200 x 2500 x 0.001°(2500 x 3000 x 0.001°|
1. ATC: 60 tools2. Oil mist device3. Variety of controllers
(FANUC/ MELDAS/ SIEMENS/ HEIDENHAIN]A. Various auxiliary work tables5. Air conditioner at the electricalcabinet6. Extensionsleeve 250mm / 300mm7. Coolant through spindle8. Manual90° angular milling head9. Splash guard around table and large external