www.healtech-electronics.com S U P P L E M E N T A R Y M A N U A L for SH-U01 PAGE 1/3 Yamaha MT-09 Tracer / FJ-09 2015- Remove the seats. Remove the fairings. Remove the fuel tank. Unplug the ABS ECU connector. (black connector behind ABS unit on right side)
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.healtech-electronics.com
S U P P L E M E N T A R Y M A N U A Lfor SH-U01
PAGE 1/3
Yamaha MT-09 Tracer / FJ-092015-
Remove the seats.
Remove the fairings.
Remove the fuel tank.
Unplug the
ABS ECU connector.
(black connector
behind ABS unit on right side)
www.healtech-electronics.com PAGE 2/3
Splice the
SpeedoHealer white wire to
the white/yellow wire end,
which goes to the
ABS ECU connector.
Splice the
SpeedoHealer green wire to
the white/yellow wire end,
which is at the
wiring harness side.
Splice theSpeedoHealer red wire to
the red/white wire.
Yamaha MT-09 Tracer / FJ-092015-
Cut the white/yellow wire about
4cm (1.5") away from the
connector.
Recommended position
for a-b switch.
www.healtech-electronics.com PAGE 3/3
Recommended position
for SpeedoHealer.
Connect the
SpeedoHealer black wire to
chassis ground or to the
battery negative terminal.
Yamaha MT-09 Tracer / FJ-092015-
Related Documents
