1
4
2
© 2014 Yamaha CorporationPrinted in Malaysia ZK67880
AV Receiver/Receptor AV
RX-A3040/RX-A2040Easy Setup Guide/Guía de configuración
sencilla
Español
RGL
English
3
5
6
7
DC OUT5V 0.5A HDMI OUT
ARC(ZONE OUT)
12(1 BD/DVD)
IN OUT IN OUT
REMOTE
AV OUT
R
L
AV 3 AV 4AV 2AV 1(1 BD/DVD)
OPTICAL4OPTICAL3COAXIAL2COAXIAL1
PHONO
GND
FM75Ω
ANTENNAHD Radio
OPTICAL
1
2
AUDIO 4 MULTI CH INPUTZONE OUT/PRE OUT
AUDIO 3AUDIO 2AUDIO 1(2 TV) CENTER
SUBWOOFER ZONE 2/F.PRESENCEZONE 3/
R.PRESENCEFRONT SURROUND SUR. BACK
SPEAKERSCENTER FRONTSURROUND BACKSURROUND ZONE 2/ZONE
3/R.PRESENCE/ ZONE 2/ZONE 3/F.PRESENCE/BI-AMPR
5 COAXIAL6
L R R RL L L R L
SINGLE
AM (4 RADIO)
PRE OUT
SUBWOOFER(REAR) CENTERFRONT SURROUND SUR. BACK
(SINGLE) (FRONT)
EXTRA SP2 EXTRA SP1
TRIGGEROUT
1
1 2
2
12V 0.1AMAX. TOTALY
PB PR
PRPB Y PRPB
Y PRPB
AV 1
COMPONENT VIDEO
AAV 3C
AV 2B
MONITOR OUT/ZONE OUT
Y
VOLTAGE SELECTOR
HDMIHDMI
HDMI
HDMI HDMIHDMI
HDMI
HDMIHDMI
2 3 41
9 125 4 37 6
ER
LAN
*RE
3
1 2
9
54
6 71
2
SUBWOOFER(REAR) CENTER
(FRONT)
1
2
3
4 5
Este documento describe las conexiones básicas y la
configuración de la unidad.Para obtener más información sobre este
producto, consulte el Manual de Instrucciones que se incluye en el
CD-ROM suministrado.Puede descargar el Manual de Instrucciones más
reciente en el siguiente sitio Web.http://download.yamaha.com/
Accesorios empleados con este documento1 Mando a distancia2
Pilas (AAA, R03, UM-4) (x2)3 Micrófono YPAO4 Antena inalámbrica5
Cable de alimentación
El cable de alimentación suministrado varía según la región en
la que se realice la compra.
Se requieren los siguientes cables (no suministrados) para crear
el sistema descrito en este documento.•Cables de altavoz
(dependiendo del
número de altavoces)•Cable de audio con patillas (x1)•Cables
HDMI (x3)•Cable de red
Español
Colocación de los altavocesConfigure los altavoces en la sala
utilizando el diagrama como referencia.1 Altavoz delantero (Izq.)2
Altavoz delantero (Der.)3 Altavoz central4 Altavoz surround (Izq.)5
Altavoz surround (Der.)6 Altavoz surround trasero (Izq.)7 Altavoz
surround trasero (Der.)E Altavoz de presencia delantero (Izq.)*R
Altavoz de presencia delantero (Der.)*9 Subgraves* Para sistema de
9.1 canales
Español
Español
Conexión de los dispositivos externos
Español
Conexión de un enrutador para conexión de red con cableEste
procedimiento es innecesario si la unidad se va a utilizar con una
conexión de red inalámbrica. En su lugar, realice los
procedimientos 6 y 10 .
Español
Conexión de la antena inalámbrica
1. Gire la antena en el sentido de las agujas del reloj.
2. Coloque la antena en posición vertical.
• Conecte únicamente la antena suministrada.
• No ejerza fuerza excesiva en la antena. Podría dañarla.
• Al embalar la unidad, retire la antena para evitar daños.
Español
Conexión del cable de alimentación a una toma de CAAntes de
conectar el cable de alimentación (solo el modelo general).Ajuste
la posición del conmutador VOLTAGE SELECTOR según su tensión local.
Las tensiones son 110–120/220–240 V CA, 50/60 Hz.
Conexión de los altavoces y el subgraves• Si conecta altavoces
de 6 Ω, ajuste la impedancia de los altavoces de la unidad en “6 Ω
MIN”.
Para ver más detalles, consulte “Ajuste de la impedancia de los
altavoces” en el Manual de Instrucciones.
•Antes de conectar los altavoces, retire el cable de
alimentación de la unidad de la toma de CA y apague el altavoz de
subgraves.
•Asegúrese de que los hilos del núcleo del cable de altavoz no
se tocan entre sí o de que no entran en contacto con las partes
metálicas de la unidad. Esto puede dañar la unidad o los altavoces.
Si se produce un cortocircuito en los cables de los altavoces,
aparecerá “Check SP Wires” en el visor delantero cuando se enciende
la unidad.
Español
Enrutador
Módem
Internet
Cable de red
TV
Entrada HDMI
Reproductor BD/DVD
Reproductor digital multimedia por cable/satélite
Salida HDMI
Salida HDMI
La unidad
(Solo el modelo general)
* La forma y la ubicación de las tomas puede variar en función
del modelo de la unidad.
A una toma de CA
Altavoz surround trasero (Der.)
Altavoz surround trasero (Izq.)
Altavoz surround (Der.)
Altavoz surround (Izq.)
Para sistema de 9.1 canales
Altavoz delantero (Der.) Altavoz delantero (Izq.)Altavoz
central
Utilice un altavoz de subgraves con un amplificador
incorporado.
Cable de audio con patillas
Altavoz de subgraves
0,3 m o más
De 10° a 30° De 10° a 30°
10 mm
Altavoz de presencia delantero (Der.)
Altavoz de presencia delantero (Izq.)
1,8 m
De 0,5 a 1 m De 0,5 a 1 m
1,8 m
English
Connecting external devices
English
English
Connecting the wireless antenna
1. Rotate the antenna clockwise.2. Stand the antenna up
straight.
• Do not connect the antenna other than the supplied one.
• Do not apply excessive force on the antenna. Doing so may
damage it.
• When packing the unit, remove the antenna to prevent
damage.
Connecting the power cable to an AC wall outletBefore connecting
the power cable (General model only).Set the switch position of
VOLTAGE SELECTOR according to your local voltage. Voltages are AC
110–120/220–240 V, 50/60 Hz.
English
Connecting a router for wired network connectionThis procedure
is unnecessary if the unit will be used with a wireless network
connection. Instead, perform procedures 6 and 10 .
Accessories used with this document1 Remote control2 Batteries
(AAA, R03, UM-4) (x2)3 YPAO microphone4 Wireless antenna5 Power
cable
The supplied power cable varies depending on the region of
purchase.
The following cables (not supplied) are required to build the
system described in this document.•Speaker cables (depending on
the
number of speakers)•Audio pin cable (x1)•HDMI cables
(x3)•Network cable
Connecting speakers/subwoofer•When connecting 6-ohm speakers,
set the unit’s speaker impedance to “6 Ω MIN”.
For details, see “Setting the speaker impedance” in the Owner’s
Manual.•Before connecting the speakers, remove the unit’s power
cable from the AC wall outlet and
turn off the subwoofer.•Ensure that the core wires of the
speaker cable do not touch one another or come into
contact with the unit’s metal parts. Doing so may damage the
unit or the speakers. If the speaker cables short circuit, “Check
SP Wires” will appear on the front display when the unit is turned
on.
English
English
Placing speakersSet up the speakers in the room using the
diagram as a reference.1 Front speaker (L)2 Front speaker (R)3
Center speaker4 Surround speaker (L)5 Surround speaker (R)6
Surround back speaker (L)7 Surround back speaker (R)E Front
presence speaker (L)*R Front presence speaker (R)*9 Subwoofer* For
9.1-channel system
English
This document explains basic connections and unit settings.For
more information about this product, refer to the Owner’s Manual
included on the supplied CD-ROM.The latest Owner’s Manual can be
downloaded from the following
website.http://download.yamaha.com/
TV
HDMI input
BD/DVD player
Router
Modem
Internet
Satellite/cable set top box
VOLTAGE SELECTOR
(General model only)
To an AC wall outlet
Audio pin cable
The unit
Network cable
Use a subwoofer equipped with built-in amplifier.
Subwoofer Front speaker (R) Front speaker (L)Center
speakerSurround speaker (R)
Surround speaker (L)
Surround back speaker (R)
Front presence speaker (R)
For 9.1-channel system
Surround back speaker (L)
Front presence speaker (L)
* The shape and location of the jacks may differ depending on
the model of the unit.
HDMI output
HDMI output
0.3 m or more
10 mm
10° to 30°
1.8 m
0.5 to 1 m 0.5 to 1 m
1.8 m
10° to 30°
9
10
8
9 0 ENTMEMORY
+10
5 6 87
MUTE CODE SET
INPUT
TV VOL
1 2 3 4
MOVIE
ENHANCER
TUNING PRESET
BAND
DISPLAYRETURN
ENTER
ONSCREEN OPTION
TOP MENU
MUTEPROGRAM VOLUME
POP-UP/MENU
PURE DIRECT
STRAIGHT
INFO SLEEP
MUSIC
PARTY HDMI OUT
TUNER
PHONO MULTI
ZONE
MAIN 2 3 4
MODE
SCENE
4321
TVBD/DVD NET RADIO
TV
TV CH
AV
AUDIO
5 6 7 V-AUX
1 2 3 4
1 2 3 4
SUR. DECODE
USB NET
SOURCE RECEIVERz
ENTER
VOLUME
STRAIGHT
ON SCREEN
AV 1YPAO MIC
1 2
3
9
54VOLUME CROSSOVER/HIGH CUT
MIN MAX MIN MAX
Optimización de los ajustes de los altavoces automáticamente
(YPAO)La función Yamaha Parametric room Acoustic Optimizer (YPAO)
detecta las conexiones de los altavoces, mide las distancias desde
estos a su posición de escucha y optimiza automáticamente los
ajustes de los altavoces, como el balance de volumen y parámetros
acústicos, de la forma adecuada para la sala.
Tenga en cuenta la siguiente medición relativa a YPAO• Los tonos
de prueba se emiten a alto volumen y pueden sorprender o asustar a
los niños
pequeños.• El volumen del tono de prueba no puede ajustarse.•
Mantenga la sala lo más silenciosa posible.• Permanezca en una
esquina de la sala detrás de la posición de escucha para que no se
convierta
en un obstáculo entre los altavoces y el micrófono YPAO.• No
conecte auriculares.
1. Pulse z (receptor de alimentación) para encender la unidad.2.
Encienda el TV y cambie la entrada de TV para que se muestre el
vídeo de la
unidad (toma HDMI OUT).3. Encienda el altavoz de subgraves y
ajuste su volumen a la mitad. Si se
puede ajustar la frecuencia de cruce, póngala al máximo.4. Ponga
el micrófono YPAO en su posición de
escucha y conéctelo a la toma YPAO MIC en el panel
delantero.
Coloque el micrófono YPAO en su posición de escucha (a la misma
altura que sus oídos). Se recomienda utilizar un trípode como
soporte para el micrófono. Puede utilizar los tornillos del trípode
para estabilizar el micrófono.
5. Para iniciar la medición, utilice las teclas del cursor para
seleccionar “Measure” y pulse ENTER.La medición comenzará al cabo
de 10 segundos.La medición tarda unos 3 minutos en realizarse.La
pantalla derecha aparece en el TV cuando acaba la medición.
• Si aparece algún mensaje de error (como E-1) o de advertencia
(como W-2), consulte “Mensajes de error” o “Mensajes de
advertencia” en el Manual de Instrucciones.
• Si aparece el mensaje de advertencia “W-1:Out of Phase”,
consulte “Si aparece “W-1:Out of Phase””.
6. Utilice las teclas del cursor para seleccionar “Save/Cancel”
y pulse ENTER.7. Utilice las teclas del cursor para seleccionar
“SAVE” y pulse ENTER.8. Utilice las teclas del cursor para
seleccionar “YES” con el fin de activar YPAO
Volume y pulse ENTER.Para ver información detallada sobre YPAO
Volume, consulte el Manual de Instrucciones.
9. Desconecte el micrófono YPAO de la unidad.
No deje el micrófono YPAO en un lugar en el que pueda estar
expuesto a la luz solar directa o a altas temperaturas durante un
periodo prolongado de tiempo.
Con esto ha finalizado la optimización de los ajustes de los
altavoces.
Si aparece “W-1:Out of Phase”
Siga el procedimiento descrito a continuación para comprobar las
conexiones de los altavoces.
1 Utilice las teclas del cursor para seleccionar “Result” y
pulse ENTER.2 Compruebe las conexiones de los cables (+/–) del
altavoz con problemas.3 Compruebe las conexiones de los cables
(+/–) del altavoz que se han identificado como
“Reverse” en el mensaje de advertencia.
Si el altavoz está mal conectado:Apague la unidad, vuelva a
conectar el cable de altavoz e intente realizar de nuevo el proceso
de medición YPAO.Si el altavoz está bien conectado:Dependiendo del
tipo de altavoces o el entorno de la sala, puede aparecer este
mensaje, incluso si los altavoces están correctamente conectados.En
este caso, ignore el mensaje y continúe con el paso 6.
Español
Reproducción de un BD/DVDAhora vamos a reproducir un BD/DVD.Le
recomendamos que reproduzca audio de varios canales (5.1 canales o
más) para sentir el sonido surround producido por la unidad.
1. Encienda el reproductor BD/DVD.2. Pulse AV 1 para seleccionar
“AV 1” como fuente de entrada.3. Inicie la reproducción en el
reproductor BD/DVD.4. Pulse varias veces STRAIGHT para seleccionar
“STRAIGHT”.5. Pulse VOLUME para ajustar el volumen.
Cuando no se oye el sonido surround o un determinado altavoz no
emite sonido, consulte “Resolución de problemas” en el Manual de
Instrucciones.
Esto completa el procedimiento de configuración básica.Continúe
con el procedimiento 10 si la unidad se va a utilizar con una
conexión de red inalámbrica.
Español
Conexión de un enrutador para conexión de red inalámbricaConecte
la unidad a un enrutador inalámbrico (punto de acceso).Existen
varios métodos para conectar la unidad a una red inalámbrica. En
esta sección se describen los tres métodos siguientes.Para ver
información detallada sobre otros métodos de conexión, consulte el
Manual de Instrucciones.
A: Uso de la configuración del botón WPS
Configure una conexión inalámbrica con el botón WPS en el
enrutador inalámbrico (punto de acceso).
Esta configuración no funciona si el método de seguridad de su
enrutador inalámbrico (punto de acceso) es WEP. En tal caso,
utilice otro método de conexión.
1. Mantenga pulsado INFO (WPS) en el panel delantero 3
segundos.“Press WPS button on Access Point” aparece en el visor
delantero.
2. Pulse el botón WPS en el enrutador inalámbrico (punto de
acceso).Cuando el proceso de conexión finalice, “Completed”
aparecerá en el visor delantero. Si aparece “Not connected”, repita
el procedimiento desde el paso 1 o intente otro método de
conexión.
B: Uso compartido del ajuste del dispositivo iOS
Configure una conexión inalámbrica aplicando los ajustes de
conexión en dispositivos OS (iPhone/iPad/iPod touch*).* Necesita
dispositivos iOS con iOS 5.0 o posterior.Antes de continuar,
confirme que su dispositivo iOS está conectado a un enrutador
inalámbrico.
1. Pulse ON SCREEN para visualizar el menú en pantalla en el
TV.2. Utilice las teclas del cursor para seleccionar “Setup” y
pulse ENTER.3. Utilice las teclas del cursor (v / w) para
seleccionar “Network” y utilice
las teclas del cursor (r / s) para seleccionar
“Network Connection”; a continuación, pulse ENTER.
4. Utilice las teclas del cursor (r / s) y ENTER para
activar “Wireless (Wi-Fi)” y seleccione “OK”.
5. Utilice las teclas del cursor (r / s) y ENTER para
activar “Share Wi-Fi Settings (iOS)” y seleccione “NEXT”.
6. Conecte el dispositivo iOS a la toma USB y desactive el
bloqueo de pantalla en el dispositivo iOS.
7. Utilice las teclas del cursor (r / s) para
seleccionar “NEXT” y pulse ENTER.
8. Pulse “Allow” en el mensaje que aparece en el dispositivo
iOS.Cuando el proceso de conexión finalice, “Completed” aparecerá
en la pantalla del TV.
9. Para salir del menú, pulse ON SCREEN.
C: Búsqueda de un punto de acceso
Configure una conexión inalámbrica buscando puntos de acceso
disponibles.
1. Realice los pasos 1 al 4 de “B: Uso compartido del ajuste del
dispositivo iOS”.2. Utilice las teclas del cursor (r / s)
para seleccionar “Access Point Scan” y
pulse ENTER.3. Utilice las teclas del cursor y ENTER para
activar el punto de acceso
deseado y seleccione “NEXT”.4. Utilice las teclas del cursor y
ENTER para introducir la contraseña y
seleccione “NEXT”.5. Utilice las teclas del cursor
(v / w) para seleccionar “CONNECT” y pulse
ENTER para iniciar el proceso de conexión.Cuando el proceso de
conexión finalice, “Completed” aparecerá en la pantalla del TV. Si
aparece “Not connected”, repita el procedimiento desde el paso 1 o
intente otro método de conexión.
6. Para salir del menú, pulse ON SCREEN.
Español
* Las pantallas pueden variar en función del modelo de la
unidad.
La unidad
Toma YPAO MIC
Micrófono YPAO
Altura del oído
Tecla (receptor de
alimentación)
Teclas del cursor
Presione suavemente el botón de la puerta del panel delantero
para abrir la puerta.
Optimizing the speaker settings automatically (YPAO)The Yamaha
Parametric room Acoustic Optimizer (YPAO) function detects speaker
connections, measures the distances from them to your listening
position(s), and then automatically optimizes the speaker settings,
such as volume balance and acoustic parameters, to suit your
room.
Note the following regarding YPAO measurement• Test tones are
output at high volume and may surprise or frighten small children.•
Test tone volume cannot be adjusted.• Keep the room as quiet as
possible.• Stay in a corner of the room behind the listening
position so that you do not become an obstacle
between speakers and the YPAO microphone.• Do not connect
headphones.
1. Press z (receiver power) to turn on the unit.2. Turn on the
TV and switch the TV input to display video from the unit (HDMI
OUT jack).3. Turn on the subwoofer and set the volume to half.
If the crossover frequency
is adjustable, set it to maximum.4. Place the YPAO microphone at
your
listening position and connect it to the YPAO MIC jack on the
front panel.
Place the YPAO microphone at your listening position (same
height as your ears). We recommend the use of a tripod as a
microphone stand. You can use the tripod screws to stabilize the
microphone.
5. To start the measurement, use the cursor keys to select
“Measure” and press ENTER.The measurement will start in 10
seconds.It takes about 3 minutes to measure.The right screen
appears on the TV when the measurement finishes.
• If any error message (such as E-1) or warning message (such as
W-2) appears, see “Error messages” or “Warning messages” in the
Owner’s Manual.
• If the warning message “W-1:Out of Phase” appears, see “If
“W-1:Out of Phase” appears”.
6. Use the cursor keys to select “Save/Cancel” and press
ENTER.7. Use the cursor keys to select “SAVE” and press ENTER.8.
Use the cursor keys to select “YES” to enable YPAO Volume and press
ENTER.
For details on YPAO Volume, refer to the Owner’s Manual.
9. Disconnect the YPAO microphone from the unit.
Do not leave the YPAO microphone in a place where it will be
exposed to direct sunlight or high temperature for an extended
period of time.
This completes optimization of the speaker settings.
If “W-1:Out of Phase” appears
Follow the procedure below to check the speaker connections.
1 Use the cursor keys to select “Result” and press ENTER.2 Check
cable connections (+/–) for the problem speaker.3 Check the cable
connections (+/–) of the speaker that was identified as being
“Reverse” in
the warning message.
If the speaker is connected incorrectly:Turn off the unit,
reconnect the speaker cable, and then try YPAO measurement again.If
the speaker is connected correctly:Depending on the type of
speakers or room environment, this message may appear even if the
speakers are connected correctly.In this case, ignore the message
and proceed to step 6.
Playing back a BD/DVDNow let’s play back a BD/DVD.We recommend
playing back multichannel audio (5.1-channel or more) to feel
surround sound produced by the unit.
1. Turn on the BD/DVD player.2. Press AV 1 to select “AV 1” as
the input source.3. Start playback on the BD/DVD player.4. Press
STRAIGHT repeatedly to select “STRAIGHT”.5. Press VOLUME to adjust
the volume.
When surround sound is not heard, or no sound is output from a
specific speaker, see “Troubleshooting” in the Owner’s Manual.
This completes the basic setup procedure.Continue with procedure
10 if the unit will be used with a wireless network connection.
Connecting a router for wireless network connectionConnect the
unit to a wireless router (access point).There are several methods
to connect the unit to a wireless network. This section describes
the following three methods.For details on other connection
methods, refer to the Owner’s Manual.
A: Using the WPS button configuration
Set up a wireless connection with the WPS button on the wireless
router (access point).
This configuration does not work if the security method of your
wireless router (access point) is WEP. In this case, use other
connection method.
1. Hold down INFO (WPS) on the front panel for 3 seconds.“Press
WPS button on Access Point” appears on the front display.
2. Push the WPS button on the wireless router (access
point).When the connection process finishes, “Completed” appears on
the front display. If “Not connected” appears, repeat from step 1
or try another connection method.
B: Sharing the iOS device setting
Set up a wireless connection by applying the connection settings
on iOS devices (iPhone/iPad/iPod touch*).* You need iOS devices
with iOS 5.0 or later.Before proceeding, confirm that your iOS
device is connected to a wireless router.
1. Press ON SCREEN to display the on-screen menu on the TV.2.
Use the cursor keys to select “Setup” and press ENTER.3. Use the
cursor keys (v / w) to select “Network” and use the
cursor keys
(r / s) to select “Network Connection”, and then press
ENTER.4. Use the cursor keys (r / s) and ENTER to check
“Wireless (Wi-Fi)” and
select “OK”.
5. Use the cursor keys (r / s) and ENTER to check
“Share Wi-Fi Settings (iOS)” and select “NEXT”.
6. Connect the iOS device to the USB jack, and disable the
screen lock on the iOS device.
7. Use the cursor keys (r / s) to select “NEXT” and
press ENTER.
8. Tap “Allow” in the message appeared on the iOS device.When
the connection process finishes, “Completed” appears on the TV
screen.
9. To exit from the menu, press ON SCREEN.
C: Searching for an access point
Set up a wireless connection by searching available access
points.
1. Perform steps 1 to 4 of “B: Sharing the iOS device
setting”.2. Use the cursor keys (r / s) to select “Access
Point Scan” and press ENTER.3. Use the cursor keys and ENTER to
check the desired access point and
select “NEXT”.4. Use the cursor keys and ENTER to enter the
security key and select “NEXT”.5. Use the cursor keys
(v / w) to select “CONNECT” and press ENTER to start
the connection process.When the connection process finishes,
“Completed” appears on the TV screen. If “Not connected” appears,
repeat from step 1 or try another connection method.
6. To exit from the menu, press ON SCREEN.
English
English
English
* The screens may differ depending on the model of the unit.
The unit
Press the bottom of the front panel door gently to open the
door.
YPAO MIC jack
YPAO microphone
Ear height
(receiver power) key
Cursor keys
EnglishAccessories used with this documentPlacing
speakersConnecting speakers/subwooferConnecting external
devicesConnecting a router for wired network connectionConnecting
the wireless antennaConnecting the power cable to an AC wall
outletOptimizing the speaker settings automatically (YPAO)Playing
back a BD/DVDConnecting a router for wireless network connectionA:
Using the WPS button configurationB: Sharing the iOS device
settingC: Searching for an access point
EspañolAccesorios empleados con este documentoColocación de los
altavocesConexión de los altavoces y el subgravesConexión de los
dispositivos externosConexión de un enrutador para conexión de red
con cableConexión de la antena inalámbricaConexión del cable de
alimentación a una toma de CAOptimización de los ajustes de los
altavoces automáticamente (YPAO)Reproducción de un BD/DVDConexión
de un enrutador para conexión de red inalámbricaA: Uso de la
configuración del botón WPSB: Uso compartido del ajuste del
dispositivo iOSC: Búsqueda de un punto de acceso