Summary This is a "sequel" to my original Sorceress model: https://cults3d.com/en/3d-model/art/the-sorceress In this sculpt I wanted to make her far more dynamic - in this pose she is about to cast a most powerful spell (or at least that's the way I see it). I started this sculpt ages ago and then dropped it because well - it happens. Upon revisiting her, I changed her hair so she will print on my resin printers without supports. She will work well for FDM too but you may need something to support her chin. She is a free model to say thank to all those people who purchase my commercial work. There is also a "saucy" version of this Sorceress available in the "naughties" section on Cults: https://cults3d.com/en/3d-model/naughties/the-saucy-sorceress Art & Design > Sculptures Loubie3D Sorceress: Spellcaster! VIEW IN BROWSER updated 10. 3. 2020 | published 10. 3. 2020 3D MODEL ONLY
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Summary
This is a "sequel" to my original Sorceress model:
https://cults3d.com/en/3d-model/art/the-sorceress
In this sculpt I wanted to make her far more dynamic - in this pose she isabout to cast a most powerful spell (or at least that's the way I see it).
I started this sculpt ages ago and then dropped it because well - ithappens. Upon revisiting her, I changed her hair so she will print on myresin printers without supports. She will work well for FDM too but you mayneed something to support her chin.
She is a free model to say thank to all those people who purchase mycommercial work.
There is also a "saucy" version of this Sorceress available in the"naughties" section on Cults:
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
sorceress magic figurine fanatsy
Category: Art Print Settings
Rafts: No
Supports: No
Notes:
Designed to be printed on a resin printer. Has been tested on the PrusaSL1 and the Elegoo Mars.
For convenience, I am including the following files:
1) The model as a solid. This is suitable for FDM printing and for resinprinting, people can make their own decisions regarding hollowing and/ordrain hole locations. For FDM printing you may need supports for her chin.I did not find this necessary for resin printing.
2) The hollow shape and drain holes as subtractive shapes that I used.These can be used as a point of reference or just some ideas. You wouldneed to subtract these from the solid.
3) The model pre-hollowed with my shape and drain holes. This issuggested only with the model at the current scale and printed with thebase flat on the bed and was successful with the Prusa SL1 and the ElegooMars. I do not guarantee success with other printer models and scales andyou use these at your own risk.
How I Designed This
How to make the Shiny!
I wrote an Instructable describing how to post process models like this. Itmainly concerns my dragon chess set but the method will work for theSorceress too: