Adrian Martinez Fokker Dr.1 Triplane VIEW IN BROWSER updated 16. 7. 2019 | published 16. 7. 2019 PRUSAPRINTERS Summary This is a model of the Fokker Dr.1 triplane. The red baron plane. It comes in 3 different filament colors: RED, WHITE and BLACK. The red body does need supports for the sticks of the wings to be holded propperly. The black and white parts fit into the holes just fine and goes glued in place. The propeller is holded by 2 white pieces that screw on place (not necessary to be glued) And then the black crosses, as well as the machine guns, are glued into the body. Toys & Games > Vehicles baronrojo rojo dr1 baron redbaron triplano triplane fokker It comes in 3 different filament colors: RED, WHITE and BLACK. The red body does need supports for the sticks of the wings to be holded 3D MODEL ONLY