Y Curtain Hooks - PrusaPrinters€¦ · The old ones had become brittle and as I touched some of them they broke easily. I eventually managed to piece one together and get some measurements.

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

Summary

Curtain Hooks. I could not find any curtain hooks for emergency purposes.The old ones had become brittle and as I touched some of them theybroke easily. I eventually managed to piece one together and get somemeasurements. I then drew an approximate shaped model, making it 3mmthick.

Household > Home Decor

living window room material hooks hook diy

decoration curtains curtain bedroom

3D Printed using PLA. Layer height 0.15mm, 15% infill with a brim. Cameout great on PRUSA i3 Mk3S. I printed 4 together as I was not sure howthey would print. I did not need to worry with a brim they held secure on asmooth bed.

S Steve

Curtain Hooks

VIEW IN BROWSER

updated 8. 3. 2020 | published 8. 3. 2020

3D M

ODEL

ONLY

78.8 KBupdated 8. 3. 2020

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

curtain-hooks.stl