Summary Hi there! It's me again. This time I have a bladeless Desk Fan for you. This is a remix to fit on the build plate of the Flashforge Creator Pro. I redesigned everything from the beginning in SketchUp and did some optimisations to make the parts better printable. Support: Only the biggest part (exterior) needs support (under and inside the "feet") —> see the last picture if you don’t know what I mean. Support is shown in brown. Printing times @ 0,2mm and 70mm/s Exterior: 10h 30mins Interior: 6h 30 mins Base: 4h The Fan is jammed betwenn the parts, so there is no need to use screws. The Fan is a 70mm PC-Fan, I use this one: https://www.amazon.de/gp/product/B01HTNV1GW/ ref=oh\_aui\_detailpage\_o06\_s01?ie=UTF8&psc=1 To increase speed I use an Adapter with 19V (instead of 12V) The switch is this one: https://www.amazon.de/gp/product/B0002W6B90/ ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1 (Diameter of the hole is 21mm) k k-eye Bladeless Desk Fan - Tischventilator VIEW IN BROWSER updated 2. 2. 2020 | published 1. 2. 2020 • • • • 3D MODEL ONLY