Summary I need a holder for my new SKR1.3 combined with dual Mosfet and Raspberry Pi3b. After looking for a matching design, i... 3D Printers > 3D Printers - Upgrades raspberrypi3 pk8 mosfet am8 2040extrusion 2040 2020extrusion 2020 I need a holder for my new SKR1.3 combined with dual Mosfet and Raspberry Pi3b. After looking for a matching design, i found https:// www.thingiverse.com/thing:3463468 from neb1. The additional requirements were: Orientation of the SKR1.3 with USB and TF Card turned by 90° 2 Extra Mosfets close to the Power Connections of SKR1.3 Extra space for Raspberry Pi3 B extra holder for a fan and a buck converter For future changes (maybe only one Mosfet, or a Fan on top of the board, i decided to keep up with a modular design with spacers and hex nuts. I want to keep printing very easy and fast. For mounting the mosfets you need Hammerhead2k2 2020/2040 Extrusion SKR V1.3 SKR V1.4 MKS Gen- L mount VIEW IN BROWSER updated 8. 3. 2021 | published 8. 3. 2021 • • • • 3D MODEL ONLY
4
Embed
Y 2020/2040 Extrusion SKR V1.3 SKR V1.4 MKS Gen- L mount
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Summary
I need a holder for my new SKR1.3 combined with dual Mosfet andRaspberry Pi3b. After looking for a matching design, i...
3D Printers > 3D Printers - Upgrades
raspberrypi3 pk8 mosfet am8 2040extrusion 2040
2020extrusion 2020
I need a holder for my new SKR1.3 combined with dual Mosfet andRaspberry Pi3b. After looking for a matching design, i found https://www.thingiverse.com/thing:3463468 from neb1.
The additional requirements were:
Orientation of the SKR1.3 with USB and TF Card turned by 90°2 Extra Mosfets close to the Power Connections of SKR1.3Extra space for Raspberry Pi3 Bextra holder for a fan and a buck converter For future changes(maybe only one Mosfet, or a Fan on top of the board, i decided tokeep up with a modular design with spacers and hex nuts. I want tokeep printing very easy and fast. For mounting the mosfets you need
Hammerhead2k2
2020/2040Extrusion SKR V1.3SKR V1.4 MKS Gen-L mount
the spacers M3x5. For the Raspberry, you need to print spacers M2,5x5For the buck converter you need to print spacers M3x12 -You alsoneed M3 Screws and Nuts to mount all the PCB's. -For the Raspberry you need screws and nuts M2.5-I incuded the necessary spacers for the mosfets, Pi and the fan.Please notice, that this thing is work in progress. The design maychange at some point. Also the holder for the fan has to be added.Please be patient.
Update: 2019-12-15Added a holder for 120mm fan also with buck converter.Added a cover without fan option.
Update: 2019-12-14Added a holder for 92mm fan and additional buck converter. Voltage of thebuck converter ist adjustable thru extra hole.