USER'S MANUAL Before using the printer,read the manual XT4131A Portable Printer
5.4 Automatic Sleep/Wakeup........................... 96. Setting.......................................................... 10 6.1 Basic Setting................................................ 11 6.2 Selftest ........................................................ 11 6.3 Selftest Info.................................................. 127. Communication........................................... 13 7.1 WiFi Communication.......................................13 7.2 Bluetooth Communication.............................. 14 7.3 IC Card & PSAM Card................................... 148. Maintenance......................................................... 15 8.1 Daily Maintenance.......................................... 15 8.2 Printing Paper Use&storage.......................... 159. Fault diagnosis............................................... 1610. Appendices.............................................. 17 10.1 Printer Parameter....................................... 17 10.2 Battery Recycle.......................................... 1911. Hazardous Substances Declaration...... 20
Catalogue
Preface ................................................... I About manual. ....................................... I Manual information ............................... II Notice and Statement ............................ II Safety instruction.................................... III
1. Standard equipments................... 1 2. Printer Part Name ......................... 2 3. Display Instruction.......................... 3 4. Before using..................................... 5 4.1 Battery Installation....................... 5 4.2 Battery Charging.......................... 6 4.3 Paper Loading............................. 7 5. Basic Function............................. 8 5.1 turn on ....................................... 8 5.2 turn off ........................................ 8 5.3 Paper feeding ............................. 9
I
for your choosing our XT4131A series printers.
Before using printers ,please read the instruction in the chapter carefully.
Preface
The symbols and characters may be different with the real one
Symbols & Conventions
About manual
Misuse may cause damage to property human hurt or even death.
Misuse may cause damage to product or human hurt
Information for protecting the printer & Long time using
Symbols below:
1 Notice ‘portable printer’ is short for ‘printer’ in the manual
Notice
Warning
Remark
XT4131A
Symbols on the printer itself:
≤2000m Safely Operation under Altitude of 2000 meters
Safely Operation in non tropical climate conditions
The printer belongs to class A,please avoid the radio interference.
STATEMENT
II
XT4131A
Manual information
NOTICE
Please download the manual from www.zicox.com or get it from your supplier,Technical details below:
1. <XT4131A specification>Provide hardware/physics/technology parameter about the printer.
2. <ESC/POS instruction set>Provide second development of esc/pos command.
3. <SDK Instruction>Provide second development of SDK command.
We keep the rights of updating hardware or software without prior informing.
please contact us if you find any losts or mistakes in the manual.
Do not copy ,spread ,transcribe or store the manual without formal permission.
XT4131A
Safety instruction
Notice
Notice
Notice
Notice
Warning
Warning
Warning
Follow below notes before use
Do not disassemble printer yourself,please read the manual carefully before using.
Switch off when there’s malfunction,unplug the charger and remove the battery if
printer’s abnormal or have peculiar smell.
Do not use printer nearby gas station ,fuel warehouse or other combustible material
When charging ,make sure the ambient temperature between -5℃~40℃,using our
original battery and power adapter.Using others’ may result in damage to the printer ,
battery leakage ,fire or even explosion.
Do not open the cover when printing,to avoid printer damage.
Do not use dissolved or corrosive chemical products to clean your printer
Using our original/recommended printing paper,to avoid bad influence on printing
quality or printhead damage
III
XT4131A
Notice
Notice
≤2000m Safely Operation under altitude of 2000meters
Safely Operation in non tropical climate conditions
Notice
Notice
Warning
Warning
Remove the battery when it becomes weak or when the unites is not in use for extended
period.
This will prevent damage to the unit from battery leakage at such timesTurn off the printer
before replacing the battery, when replacing if using battery cut off the power.
Using the printer between -10℃~50℃,The printing quality may be lower if out of compass.
The quality of paper may be direct or indirect influence on printing quality or storage time,
choose long lasting paper.
IV
XT4131A
V
Follow below notes to use battery
Before using please read this manual and details on battery.
Charge battery in proper ambient temperature,if temperature too high ,battery may be
heated,unshaped or even fired.
Protect circuit units or others in the battery ,do not diassemble the battery ,otherwise short-circuit
may occur & electrolyte may go out .if electrolyte jumps into eyes ,flush the eyes with water and
send to the hospital immediatly.
Do not squeeze,mechanical vibrate or shake the battery ,short-circuit is not allowed.
Do not put battery into water,otherwise short-circuit may occur.
Do not expose the battery under sunshine,dusty or anywhere have much smoke.
Change battery when power’s too weak to use.
Keep the battery away from children.
Stop using if battery’s out of shape or color changed.
Notice
Notice
Notice
Notice
Notice
Notice
Warning
Warning
Warning
XT4131A
VI
Before using read the manual and details on charger carefully
Do not disaseemble or change charger ,do not use charger if wire damaged,otherwise electric
may shock ,fir or charger damage may occur.
Do not touch charger with wet hands ,please cut off the power supply if charger’s in contact with
water or other liquid.
Do not squeeze,mechanical vibrate or shake battery so much .
Do not use charger under high temperature ,the equipment is not water resistance.
Do not wet the battery or kee it in the rain.
Hold the charger when unplug,otherwise wire may be damaged.
Keep the charger away from children ,to avoid any kinds possible of dangers.
Follow below notes to use charger
Notice
Notice
Warning
Warning
Warning
Warning
XT4131A
Standard accessories
XT4131A printer(1)
Printing paper(1)
USB data wire Car charger
Optional
Charger(1)
Battery(1)
Belt clip(1)
Please contact your supplier if parts lost or broken
1
1.Standard equipments
Notice
Please contact your supplier if you need parts information
NoticeUser’s manual(1)、Warranty card(1)、Certification(1)
XT4131A
2.Printer Part Name
2
display
paper cover
paper outlet
power switch
feeding button
set button
USB port
open cover button
power adapter
battery cover
belt clip
rubber plug
Face Back
XT4131A
3.Display Instruction
external powercover open
Wireless communication/set mode
The wireless communication or set mode&bluetooth mode below:
paper feedingpaper lacking
Symbol
Description
bluetooth mode
3.1 Wireless Communication/Set mode
set mode
power level
Bluetooth paired,there’s a locking
sign. When the data is tranmitted ,
it will flash
How to set,please read the sixth part
XT4131A3.6 Power level
3.7 Character
3.4 Cover open
The parts shows the character
3.2 Printing/feeding
3.3 Out of paper
When printing or feeding ,the symbol will display。
When paper loading is incorrect or lack of paper ,the symbol will display
When cover isn’t closed,the symbol will display
When charging, the symbol will display .
3.5 External power
This icon indicates that the charger is plugged in
XT4131A
4.1 Battery installation and notes
Printing paperBattery
Keep the battery
fully charged. When
using the battery
for the first time
or when it needs
long-term storage .
Battery installation,charging and paper loading
The new battery without battery installation
4.Before Using
put the battery into
the battery comparment.
As the picture showed above
Remark
Put the cover on .
As the picture showed above.
XT4131A
4.2 Charging battery
Do not remove the battery when
charging
AC:100V~240V(50-60Hz)
Please use our special
designed power adapters ,
use others’ may result
in damage to printers
Could print during chargingCharging: Power level blinking
Charging completed: level full & stop blinking
Plug the power adapter inoto a power
supply socket and the DC into the charging
port of the printer
Notice
Warning
Remark
Charging port
XT4131A
XT4131A uses diameter 39mm,width 80mm thermal printing paper/label
4.3 Paper Loading
Remove the seal on paper roll Upward pushing the button to open the paper compartment
According to the illustration,Loading paper roll with right direction
3
Notice the paper
roll direction ,it
may not print when
In the opposite
position
Pull the paper roll
out of paper storage
area.
Remark
Remark
Pull a strip of paper out ofcompartment ,and close it.
According to the illustration ,tear out the outside paper5
XT4131A
5.1 turn on
Press the power switch for 2
s to open printer
5.2 turn off
When printer turned on ,press
the power switch 3 s to turn
off the printer.
5.Basic function
Set button
Powerswitch
feeding button
Pull a strip of paper out ofcompartment ,and close it.
XT4131A
5.4 automatic sleep/wakeup
Automatic sleep
Automatic wakeup
zzzz
When sleeping ,press button or if there’s data transmission
printer will wakeup.
After turn on the printer,within 6 s if no data transmission,
it will be enter antomatic sleep state.
Under sleep mode, Z numbers
mean power levels
Remark
Press feeding button: feeding10cm
5.3 Paper Feeding
Set button change option
Feeding
Reserve and quite:Press the power switch,
or do not operate buttons more than 5
seconds, the printer will automatically save
the settings and exit the setting State.
6.SettingX
T4131A
Under sleep mode, Z numbers
mean power levels
normal
highAccording the demands to set printing quality
Print quality:打印质量 高CFG
Set button change option
Feeding blackness:
12345
blackness: 4
quality:normal
CFG
After turn on printer,Press set button(No sleep mode)
Reserve and quite:Press the power switch,
or do not operate buttons more than 5
seconds, the printer will automatically save
the settings and exit the setting State.
different types of paper adjust in different printingblackness
CFGWhen the icon shows up ,
The printer enter the set state.
MarkDetectMode: 0
1
MarkDetectMode: 0CFG
Remark The gap of label/black marks will feed to the cutter then stop .
Stop feeding once detecting the label gap/black marks
Autofeed:Autofeed: NoCFG
No Yes Autofeeding 10cm when has paper
change option content
XT4131A
Language:ENGLISH
中文You can switch interface languageslanguage:中文
CFG
Bluetooth Clear BindBT Clear BindCFG
Autoofftime:set automatic shutdown time in 30m/60m/120m/240mAutoofftime 30mCFG
selftest:press feeding button Printer will do selftest printing
selftestCFG
XT4131A
6.2 Selftest info
Items with * can be changed by software settings
or printer settings,for more information, please
contact your supplier.
Remark
Self-test page will list
the specific printer
model, interface configu-
ration, database configu-
ration, and so on.
press set button ,choose
selftest then press the
feeding button
Turn on and press the set button to
to enter the interface of set up.
CFG
Selftest
**********
Device Name:XT4131A
BDRddress :00:00:64:11:31:52
**********
4.10 selftest page information
Model Name:XT4131A
Firmware :4.15
Bluetooth
Device Name:XT4131A
Service :SPP,HCRP
product info
Font list
the head
* Symbol
unique serial number
BT BT device name BT serves BT address
patternFirmware
Model Name:XT4131A
Firmware :4.15
>> Bluetooth
Service :SPP,HCRP
BDRddress :00:00:64:11:31:52
>> System
>> USBUSB Mode:USBPRINTER
>> Fonts01 - Unicode Font 16 (936)简体中文 (950)繁體中文
00 - Unicode Font 24 (936)简体中文 (950)繁體中文02 - Unicode Font 32
(936)简体中文 (950)繁體中文
>> End
XT4131A
7.1 WiFi communication (Wireless Ethernet server)
7.communiationXT4131A has two communications
wireless:WiFi (need driver)
wireless:Bluetooth
Remark
Pls download driver from the website or ask for your supplier to get it
WiFi communication distance:≤50m50m
XT4131A printers can provide a 802.11b/g standard Wi-Fi wireless communications,
Wi-Fi communication interface using the IChip CO2144 Network to control chips & Marvell88W8686
WiFi chipsets. More than 50 meters distance network using ,which makes your work more flexible
XT4131A
7.2 Bluetooth communication
XT4131A supports Bluetooth 2.0/CLASS 2(10 meters)bluetooth communication
Bluetooth:distance≤10M
Pls download driver from the website or ask for your supplier to get it
Default pin password:00007.3 IC Card and PSAM Card
IC card operation: when you need to use IC cards, IC metal face upward inserting the IC card slot,when printer screen prompts: IC card has been inserted, IC card read/write operations can be made. PSAM card operation: when you need to use the PSAM card, remove the battery cover,then remove the battery, put PSAM card into card slot, then install the battery, close the battery cover, turn on. Then PSAM card can do read/write operation. After using, remove the PSAM card.
XT4131A
8.1 Daily Maintenance
1 Use the dry cloth to clean the printer .2 Keep the printhead clean.3 Remove the battery and dry the printer if inner part of print have water .4 Please remove the battery if won’t use the printer for long time.
8.2 Printing paper use & storage
1 About storage,please avoid direct sunlight or high temperature places , do not open the wrapping paper. 2 Receipt bills please save in normal temperature (about 20 ° c) , for extending effective saving time. 3 If u wanna save the receipt bills for long time , please select long-term thermal paper.
8.Maintenance
XT4131A
9.Fault Diagnosis
7
16
Trouble status Trouble cause Solution Page
Short Buzz 4 times Out of paper Please check the paper roll
Short Buzz 2 times Low battery voltage Please charge it in time 6
Only paper feeding without printing
Paper installation is wrong nstall paper again with opposite direction
Low printing quality
Printer dirty Clean printer ①
7
Ribbon problem Use high quality ribbon 10
Short Buzz 4 times Paper cover do not closed Close paper cover 7
Character faded after weeks of printed
Printing paper problem Use high quality printing paper
Storage temperature too high Storage temperature around 20C
Turn off automatically battery exhaust Please charging
16
16
6
XT4131A
10.1 Printer Parameter
10.Appendices
Parameter
print head 100KM,SEIKO original, one year warranty
Yes,support english and chineseLCD display screen
80mmpaper width
126mm*104mm*51mmproduct size
Support Word,EXCEL,PPT ,etc printings
Support Bartender,magic,labelcool,etclabel printing
Suppot 1D&2D printingbarcode printing
Support 0-360 degree arbitrary rotation printingRotary printing
suppot JPG,BMP,TIF,JPEG,etc.Driver printing ,no need development picture printing
2000mAH 7.4Vbattery capacity
Office
USB、bluetooth(Android、windows、linux systems)、WIFI(windows system)Interfaces
reliablity IP54
printing speed ≥40mm/s
XT4131A
waterproof
dustproof
Windows XP/7(PC)
Windows CE/Mobile
Android
printing material
printing thickness
yes
yes
driver printing
suppot,Microsoft standard SDK package、ApI i(support CE5.0 and above
,Mobile5.0 and above)
suppot,Google standard SDK package、API(support 2.0 and above)
Thermal paper /Thermal label
50∽150um
Independent intellectual property rights
Certification CCC,CE
third pary certification IP54,etc
charge ways
anti-dropping pass 1.2 meter anti-dropping test
parameter setting Personalized interface functions by setting different parameters
Car charging ,printer charging
1 utility patents, software copyrights 3
XT4131A
10.2 Battery Recycle
Printers use rechargeable lithium polymer batteries ,please recycle after using.
XT4131A
usage time
part name
electronic assembly components
(including electronic components)
adapter ,data wire①
chargeable LI battery
no electronic parts
case
(Pb) (Hg)
(Cd)
(Cr(VI)) (PBB) (PBDE)
hazards products and elements
○ ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○
×
×
①
○ ○ ○ ○ ○
○
○
○ ○ ○ ○ ○
10
5e
Indication of hazardous products and elements symbol
Hazardous products or element within SJ/T11363-2006 standard requirement.
Hazardous products or elements exceed SJ/T11363-2006 standard requirement ,it is difficult to achieve based on
current technical level and above products within 《2002/95/EC》standard exemption.
Accessories may be sold with main products or separate parts ,the coverage of hazardous products or elements
are teh same .
Environmental protection deadline
The character based on national standard and rules ,which indicates the environmental protection deadline.
please reference to the wizard and local law when using .
11.