XLV3 IoT LED Controller • IoT Indoor lighting, stand-alone zones • IoT Indoor lighting, networked systems with sensor data exchange. • Fully integrated lighting systems with building automation systems, industrial automation. System Description The XVL3 IoT LED Controller is an automation device capable of driving up to 12 LED circuits, up to 10 hard- wired sensors/switches, and up to 15 EnOcean sensors/ switches. Wired network connectivity includes BACnet IP over twisted pair wire. FIPS grade AES 256 encryption assures system security. Encryption can be turned off in case of a requirement to integrate with other BACnet IP system vendors that don’t support encryption. Wireless port includes connectivity with EnOcean standard devices, sensors, switches. EnOcean sensors require no battery or power lines eliminating maintenance and drastically reducing cost of installation. Integrated watt meter reports energy usage including Amps, Volts, Watts, Watt-Hours. 12 independent LED driver channels can be grouped for scheduling purposes, sensor and switch assignments. Dimming, motion sensors, light level sensors, and scheduling are standard. XLV3 IoT LED Controller complies with Title-24. Easy integration of color-tuning by grouping multiple channels of the BlueOcen IoT driver. Large networks of XLV3 LED IoT Controllers can be installed by connecting controllers to each other using standard twisted pair cable. Sensor data can be shared between zones within each controller and on the network. XLV3 IoT LED Controller when combined with application server and router offers full automation capabilities including web interface, trending, alarming, scheduling and integration with other BAS and IoT systems. AllJoyn and BACnet IP are the default protocols with LonWorks and Modbus also supported. Trends Alarms Schedules Local Monitor Work Station BAS Server Ethernet Backbone CAT- 6 XLV3 LED I/O Controller XLV3 LED I/O Controller Up To 15 Enocean Devices per Controller XLV3 LED I/O Controller 10 universal Wired Inputs IP Network Management Device BACnet Over Twisted Pair Wire 12 LED Fixtures Dimmable 12 LED Fixtures Dimmable Internet IoT Cloud Application Server / Network Management Device / BACnet IP Standalone Solution Applications Network Interface / EnOcean Wireless LonWorks Network Programmable for HVAC Applications 6 LED Fixtures Tunable Twisted Pair Wire to LED Fixtures 6 LED Fixtures Tunable Programmable for XLV3 LED I/O EnOcean Wireless Remote Monitor Router Fire Wall
6
Embed
XLV3 IoT LED Controller - Adesto Technologies...2019/01/11 · XLV3 IoT LED Controller • IoT Indoor lighting, stand-alone zones • IoT Indoor lighting, networked systems with sensor
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
XLV3 IoT LED Controller
• IoT Indoor lighting, stand-alone zones
• IoT Indoor lighting, networked systems with sensordata exchange.
• Fully integrated lighting systems with buildingautomation systems, industrial automation.
System Description
The XVL3 IoT LED Controller is an automation device capable of driving up to 12 LED circuits, up to 10 hard-wired sensors/switches, and up to 15 EnOcean sensors/switches.
Wired network connectivity includes BACnet IP over twisted pair wire. FIPS grade AES 256 encryption assures system security. Encryption can be turned off in case of a requirement to integrate with other BACnet IP system vendors that don’t support encryption.
Wireless port includes connectivity with EnOcean standard devices, sensors, switches. EnOcean sensors require no battery or power lines eliminating maintenance and drastically reducing cost of installation.
Integrated watt meter reports energy usage including Amps, Volts, Watts, Watt-Hours.
12 independent LED driver channels can be grouped for scheduling purposes, sensor and switch assignments. Dimming, motion sensors, light level sensors, and scheduling are standard.
XLV3 IoT LED Controller complies with Title-24.
Easy integration of color-tuning by grouping multiple channels of the BlueOcen IoT driver.
Large networks of XLV3 LED IoT Controllers can be installed by connecting controllers to each other using standard twisted pair cable. Sensor data can be shared between zones within each controller and on the network.
XLV3 IoT LED Controller when combined with application server and router offers full automation capabilities including web interface, trending, alarming, scheduling and integration with other BAS and IoT systems. AllJoyn and BACnet IP are the default protocols with LonWorks and Modbus also supported.
Trends
Alarms
Schedules
Local Monitor Work Station
BAS Server
Ethernet Backbone CAT- 6
XLV3 LEDI/O Controller
XLV3 LEDI/O Controller
Up To 15 Enocean Devices per Controller
XLV3 LEDI/O Controller
10 universalWired Inputs
IP Network Management Device
BACnet Over Twisted Pair Wire
12 LED Fixtures Dimmable
12 LED Fixture s Dimmable
InternetIoT Cloud
Application Server / Network Management Device / BACnet IP
BlueOcean IoT Platform Mobile App Mobile app provides graphical programming interface for free programming of the inputs , outputs, and the logic in between the two. The app stores configuration for multiple XLV3 LED IoT Controllers and arranges it into projects. Programs can be backed up and sent for use in another project. The app currently runs on full version of windows desktops and tablets.
XLV3 LED IoT Controller is a generic platform of 48V DC devices designed for operation directly on resilient micro-grid. The micro-grid is typically created by combining Photovoltaic Arrays (solar panels) with battery bank and inverters. Inverters may connect the micro-grid with house AC grid. Some of the micro-grid benefits include:
• Resiliency by independence from utility grid and easybattery bank and PV integration.
• Superior efficiency by avoiding multiple voltagetranslations.
• Future proofing by investing in DC.
• Enlarged profits.
XLV3 LED IoT Controller can be powered directly from mains by a 48V power supply (recommended Meanwell HLG-600H-54) or be a part of micro-grid as depicted below:
BACnet IP over Ethernet allows BlueOecan IOT controller to be
used in networks of hundreds or thousands of IoT devices.
Wired backbone assures system stability and resiliency.
Standard twisted pair wire can be run from one controller to
the next and so on.
BlueOcean IoT pioneers device-level system security with FIPS grade AES 256 encryption. Encryption can be turned off in case
of a requirement to integrate with other BACnet IP system
vendors that don’t support device-to-device encryption.
BACnet IP protocol standardizes communications and makes it
possible to integrate the BlueOcean IoT platform with other compliant networks. AllJoyn BACnet interface can be used to link XLV3 LED IoT Controller devices to IoT could. Application Server can be used for management of BACnet network, trend storage, data analytics, sensor data binding to other BACnet controllers, scheduling, alarming, ect.
10 x Universal Inputs All inputs have 12 bit resolution
Resistive Thermistor 10KΩ Type II and Type III
(Type II is recommended)
Potentiometer with custom scaling
Dry contact
Voltage 0-10V DC
1-5V DC
Current 0-20mA DC
4-20mA DC
12 x LED Drivers Dimmable by 0.1% increments
Rated at 1500mA Max, Class II
Wireless EnOcean 902MHz— with optional antenna
Sensors, switches
Wireless signal length max 35ft in-doors
LED
Device status GREEN Pulsing green = Normal
Off = No power or other fault
Service pin GREEN OFF = Normal, running
ON = No application
Status Lights
NOTE: No Hardware Jumpers required to configure I/O
Mechanical
UL 916
UL 2108
CSA C22.2#205
CSA C22.2#9.0
WarrantyStandard 5-year warranty, 7 and 10 year warranty available.
10 in
3.5in
Automation Protocols SUPORTED PROTOCOLS
BACnet IP, MODBUS TCP, LONWORK, IoT, EnOcean
RoHS
XLV3 LED IoT Controller
Agency Approvals
ENVY
Text Box
Patent # US 10,159,133 B2
ENVY
Rectangle
Installation
Q-Bus Network Wiring
XLV3 LED IoT Controller must be installed into NEMA rated enclosure using DIN rail. Standard 35mm DIN rail (top hat rail EN 50022 – 35 × 7.5mm) is used to speed up the installation. Mount DIN rail onto enclosure’s backplate, then snap-in the Sigma Smart IoT controller onto the rail.
Use only low capacitance LEVEL IV, 22AWG, twisted pair for network wiring. This wire type is sometimes called the “Echelon wire”. Wire is available from many distributors. The total network wire length is not to exceed 1000ft. Network must be terminated with one 50-OHM, 1/4-watt resistor, typically located at the network interface (SLNI) of the programmable host. To avoid interference, the network wiring should be installed at least 1/2 inch from other network and AC power wiring.
UIs accept building automation standard signals 0-20mA, 0-10V, resistive signals i.e. dry contact relay closure or a thermistor. Each signal type requires different wiring method:
XLV3 LED IoT Controller
The red clips on the back of the enclosure will latch onto the DIN rail. To remove the controller, use thin screwdriver to gently pull out the clips while removing the enclosure from DIN rail.
XLV3 LED IoT Controller is to be used as an LED low voltage lighting system and powered by a power supply listed by a Nationally Recognized Testing Laboratory and for permanent installation and use in location in accordance with NEC, NFAP, Article 411.
LED Fixtures suitable for installation with the XLV3 LED IoT Controller consist of an LED light engine and a connector that allows for direct wire connection from the LED engine to one of the output channels on the XLV3 LED IoT Controller. Note that there is no LED DRIVER in the lighting fixture as the XLV3 LED IoT Controller is the LED Driver with 12 output channels. Some LED fixtures are tunable and feature cool and warm light LEDs. In such case, two output channels are used, one to drive the cool LEDs and the other to drive the warm LEDs.