Composition Design & Manufacture Yeoman Rainguard XL Aluminium Pipes are extruded profiles using aluminium alloy to EN AW-6063 T6 BS EN 12020 – 2:2001. Pipe collars are die cast. Shape & Dimensions Pipes are as detailed and are supplied in standard 3.0m, 2.0m and 1.0m lengths. All lengths come complete with an eared socket (unless otherwise required). Standard Accessories 1 part top offset, 2 part top offset, plinth offset, side offset, branch, bend, shoe, square to round connector, loose socket with spigot, loose clip, rainwater diverter, timber frame bracket, drainage base, drainage grate, drainage cover, bobbin, stainless steel fixing screw, cover cap. Optional Accessories Access plates, rodding eyes, decorative ears, special configurations. Colours & Finishes All pipes and accessories are pre finished in Black textured polyester powder coating to give years of maintenance free service. White is also available as standard. Our vision colour range is also readily available to order at a small premium (see colour & finishes on pages 46-47) Products can also be supplied in standard mill finish. Maintenance Yeoman Rainguard XL Aluminium Pipes require no maintenance other than periodical cleaning out. Availability Please contact our sales office 0113 279 5854 for accurate delivery. XL ALUMINIUM PIPES Round Rectangular Square SIZE (mm): 75 Dia, 100 Dia SIZE (mm): 100 x 75 SIZE (mm): 75 x 75 XL Aluminium 2 Part Top Offset XL Aluminium Pipe XL Aluminium Back Offset