37 XD Series - Air Atomising Nozzle Nozzle Features Design Options XD series atomising nozzle are specially designed to evenly mix liquid and gas to generate fine, medium or large spray droplets. Each spray assembly consists of an air cap and fluid tip and are available in many flow and spray pattern combinations, including flat fan, full cone and hollow cone. All spray assemblies are interchangeable and therefore provide flexibility for your spray requirements. STANDARD MODEL XD series standard air atomising spray nozzle is designed with a hex plug. Inlet sizes available are 1/8” or 1/4” NPT or BSPT female. XD SERIES - SHUT-OFF XD series shut-off air atomising spray nozzle is designed with an adjustable needle assembly to fine tune flow. Inlet sizes available are 1/8” or 1/4” NPT or BSPT female. XD SERIES - CLEAN-OUT XD series clean-out air atomising spray nozzle is designed with a push button needle assembly to clear out debris build-up in fluid tip. Inlet sizes available are 1/8” or 1/4” NPT or BSPT female. XD SERIES - SHUT-OFF / CLEAN-OUT XD series shut-off / clean-out air atomising spray nozzle is designed with both adjustable and push button needle assembly to fine tune flow and clear out debris build-up in fluid tip. Inlet sizes available are 1/8” or 1/4” NPT or BSPT female. XD SERIES - THICK WALL XD series thick wall adapter air atomising spray nozzle is designed to allow nozzle to be held securely when fitted through a thick fixture. Inlet sizes available are 1/8” or 1/4” NPT or BSPT female. XD SERIES - THIN WALL XD series thin wall adapter air atomising spray nozzle is designed to allow nozzle to be held securely when fitted through a thin fixture. Inlet sizes available are 1/8” or 1/4” NPT or BSPT female. XDJ SERIES - AUTOMATIC XDJ series automatic air atomising nozzle is designed with an inner air cylinder allows the ‘on - off’ control operation which can cycle up to 180 times per minute. XDJS SERIES - COMBINED XDJS series combined air atomising nozzle is designed with one air port to operate both cylinder air and nozzle air. XDJS series requires a minimum 2.0 BarG (30 psi) to open air cylinder and can cycle up to 180 times per minute. XDJM SERIES - MINI XDJM series mini air atomising nozzle is designed with one air port to operate both cylinder air and nozzle air. XDJM series requires a minimum 2.0 BarG (30 psi). XDJM series mini is ideal for confined spaces. Applications n Static Control n Humidifying n Mould Lubrication n Deodorising n Air Disinfection n Sanitizer Sprays SECTION E - AIR ATOMISING NOZZLE
7
Embed
XD Series - Air Atomising Nozzle - Spray Technologies · 2016. 12. 2. · 38 SECTION E - AIR ATOMISING NOZZLE XD Series - Air Atomising Nozzle SPRAY ASM FLUID TIP & AIR CAP FLOW RATE
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SECTION E - AIR ATOMISING NOZZLE 37
XD Series - Air Atomising NozzleNozzle Features
Design Options
XD series atomising nozzle are specially designed to evenly mix liquid and gas to generate fine, medium or large spray droplets. Each spray assembly consists of an air cap and fluid tip and are available in many flow and spray pattern combinations, including flat fan, full cone and hollow cone. All spray assemblies are interchangeable and therefore provide flexibility for your spray requirements.
STANDARD MODELXD series standard air atomising spray nozzle is designed with a hex plug. Inlet sizes available are 1/8” or 1/4” NPT or BSPT female.
XD SERIES - SHUT-OFFXD series shut-off air atomising spray nozzle is designed with an adjustable needle assembly to fine tune flow. Inlet sizes available are 1/8” or 1/4” NPT or BSPT female.
XD SERIES - CLEAN-OUTXD series clean-out air atomising spray nozzle is designed with a push button needle assembly to clear out debris build-up in fluid tip. Inlet sizes available are 1/8” or 1/4” NPT or BSPT female.
XD SERIES - SHUT-OFF / CLEAN-OUTXD series shut-off / clean-out air atomising spray nozzle is designed with both adjustable and push button needle assembly to fine tune flow and clear out debris build-up in fluid tip. Inlet sizes available are 1/8” or 1/4” NPT or BSPT female.
XD SERIES - THICK WALLXD series thick wall adapter air atomising spray nozzle is designed to allow nozzle to be held securely when fitted through a thick fixture. Inlet sizes available are 1/8” or 1/4” NPT or BSPT female.
XD SERIES - THIN WALLXD series thin wall adapter air atomising spray nozzle is designed to allow nozzle to be held securely when fitted through a thin fixture. Inlet sizes available are 1/8” or 1/4” NPT or BSPT female.
XDJ SERIES - AUTOMATIC XDJ series automatic air atomising nozzle is designed with an inner air cylinder allows the ‘on - off’ control operation which can cycle up to 180 times per minute.
XDJS SERIES - COMBINED XDJS series combined air atomising nozzle is designed with one air port to operate both cylinder air and nozzle air. XDJS series requires a minimum 2.0 BarG (30 psi) to open air cylinder and can cycle up to 180 times per minute.
XDJM SERIES - MINI XDJM series mini air atomising nozzle is designed with one air port to operate both cylinder air and nozzle air. XDJM series requires a minimum 2.0 BarG (30 psi). XDJM series mini is ideal for confined spaces.
Applicationsnn Static Control
nn Humidifying
nn Mould Lubrication
nn Deodorising
nn Air Disinfection
nn Sanitizer Sprays
SECTION E - AIR ATOMISING NOZZLE
38 SECTION E - AIR ATOMISING NOZZLE
XD Series - Air Atomising Nozzle
SPRAY ASM
FLUID TIP &
AIR CAP
FLOW RATE (l/ph) SPRAY COVERAGE
Water - 0.7 BarG Water - 1.5 BarG Water - 2.0 BarG Water - 3.0 BarG Water - 4.0 BarG Air
XD series flat fan internally mixed atomising nozzles produce fine spray particles in spray angles of approximately 75° to 90°. The pressure method system allows the supply of liquid to the fluid tip under pressure. The liquid is then mixed internally in chamber with compressed air to produce a flat fan spray pattern.
Ordering Example Available Materials1/4-XD-FP-SS-SA54 ENPB, 303ss, 316ss
* Other materials available on request
SECTION E - AIR ATOMISING NOZZLE 39
Full Cone Spray Pattern
LY
X
XD Series - Air Atomising Nozzle
Performance Data
XD-RP FULL CONE SPRAY - PRESSURE METHOD
SPRAY ASM
FLUID TIP &
AIR CAP
FLOW RATE (l/ph) SPRAY COVERAGE
Water - 0.7 BarG Water - 1.5 BarG Water - 2.0 BarG Water - 3.0 BarG Water - 4.0 BarG Air
XD series full cone internally mixed atomising nozzles produce very fine spray particles in spray angles of approximately 10° to 20°. The pressure method system allows the supply of liquid to the fluid tip under pressure. The liquid is then mixed internally in chamber with compressed air to produce a full cone spray pattern.
Ordering Example Available Materials1/4-XD-RP-E-SA33 ENPB, 303ss, 316ss
* Other materials available on request
40 SECTION E - AIR ATOMISING NOZZLE
XD Series - Air Atomising Nozzle
Performance Data
Nozzle Features
XD series externally mixed flat fan atomising nozzles produce fine spray particles in spray angles of approximately 55° to 90°. The pressure method system supplies liquid to the fluid tip, liquid exits fluid tip, then mixes with compressed air externally of the nozzle air cap and forms a flat spray pattern.
Ordering Example Available Materials1/4-XD-FEP-316SS-SAF29C ENPB, 303ss, 316ss
* Other materials available on request
SPRAY ASM
FLUID TIP &
AIR CAP
FLOW RATE (l/ph) SPRAY COVERAGE
Water - 0.7 BarG Water - 1.5 BarG Water - 2.0 BarG Water - 3.0 BarG Water - 4.0 BarG Air
XD series cone internally mixed atomising nozzles produce fine spray particles in spray angles of approximately 65° to 75°. The pressure method system allows the supply of liquid to the fluid tip under pressure. The liquid is then mixed internally in chamber with compressed air to produce a hollow cone spray pattern.
Ordering Example Available Materials1/4-XD-RWP-316SS-SA27 ENPB, 303ss, 316ss
* Other materials available on request
SPRAY ASM
FLUID TIP &
AIR CAP
FLOW RATE (l/ph) APPROX. SPRAY COVERAGE
Water - 0.7 BarG Water - 1.5 BarG Water - 2.0 BarG Water - 3.0 BarG Water - 4.0 BarG Air
XD series flat fan and full cone siphon / gravity fed internally mixed air atomising nozzles produce very fine spray particles in spray angles of approximately 10° to 85°. The siphon / gravity fed method system draws / feeds the supply of liquid once compressed air is initiated, mixed internally in chamber to produce a spray pattern.
Flat Fan Spray Pattern
150mm250mm
400mm
Z Y
L
X
Full Cone Spray Pattern
LY
X
Ordering Example Available Materials1/4-XD-RG-316SS-SA3B ENPB, 303ss, 316ss