www.WeatherSolve.com Since 1986
Jul 08, 2015
www.WeatherSolve.comSince 1986
www.WeatherSolve.com
About WeatherSolve Structures
Windbreak research
Examples of windbreaks
Windbreak components
Extreme wind considerations
www.WeatherSolve.comAt WeatherSolve we have been researching, developing,
designing, and building wind fences for over 30 years.
www.WeatherSolve.com
WSS has miles of fences in North and South America, in the
Middle East, Asia and the South Pacific. Over 10km of those
fences are close to 100ft high.
www.WeatherSolve.com
We know of no other companies with wind fences still standing
that are over 60ft high. In fact no other company worldwide has
even a small fraction of this experience – in length, in height or in
variety of locations.
www.WeatherSolve.com
Engineering based near Vancouver, Canada. supply arm based in Georgia USA
We fit our input to your needs:-
Design – Aerodynamic and structural design capabilities
Supply – from specialized components only to turnkey supply
Install – from supervision and training only to complete install
Maintain – Inspection service or -
complete maintenance contract
www.WeatherSolve.com
www.WeatherSolve.com
Dustbowl Storm (1930’s)
Early wind fence research focused on controlling wind erosion Contractors discussing kiwifruit
shelter erection techniques, NZ
www.WeatherSolve.com
There have been many studies of wind fence effectiveness.
Effectiveness relates to aerodynamic porosity of the
cladding and height of the fence.
Windspeed reduction is also a function of the distance from
the fence and several other more subtle variables such as
turbulence of the incoming wind.
www.WeatherSolve.com
Shelter Effect
Illustrated are the mean windspeed
reductions, behind model windbreaks in a
wind tunnel, as a fraction of windspeed without the barriers.
Raine and Stevenson, 1977
www.WeatherSolve.com
Dust erosion from a pile
www.WeatherSolve.com
Erosion ∝ (wind speed) 3
Overall dust loss is typically proportional to (windspeed) 2
A good windbreak will reduce wind speeds to under 40% so dust loss is reduced to under 0.4 x0.4 = 16%
Upwind windbreak
www.WeatherSolve.com
Dust trapped in front of windbreak
Most of rest falls out close to windbreak
Downwind windbreak
Founded in 1944.
Based in Kansas City, USA
Independent not-for-profit institute
An internationally recognised problem solver
for Government and Industry
Specialists in wind pattern research
and modelling
For exploring non-standard
situations, WeatherSolve is pleased to be
able to work with the Midwest Research
Institute.
www.WeatherSolve.com
www.WeatherSolve.com
Canopy windbreak, NZ
www.WeatherSolve.com
Inside canopy, winds outside appx 10 mph
www.WeatherSolve.com
Grid windbreak system on Carembolas in South Florida
Plywood plant, BC
Dual fabric layers >> upwind fabric
www.WeatherSolve.com
Wind protection for iron slag
tipping area. 45ft high. NJ
www.WeatherSolve.com
Portable windbreak for gravel crusher.
20ft high.
Towable or truckable.
www.WeatherSolve.com
Causeway windbreak
for coal pile. Northern BC
40ft high on 30ft causeway
.
www.WeatherSolve.com
Sulphur Stockpile
Aruba 40ft high.
Note overhanging top to curl wind along face of windbreak
www.WeatherSolve.com
Combined windbreak, security fence and visual barrier - OR
www.WeatherSolve.com
Cooling tower wind control for increased efficiency -NV
Truck dump safety and dust control - OK
www.WeatherSolve.com
Several fences – over
9km total length
Between 15m and
30m high
www.WeatherSolve.com
Windfence 2.5 km in
length, 20m high
www.WeatherSolve.com Windfence 28m high
x 3.3 km in length
www.WeatherSolve.com
Windfence 7m high x
120m in length
www.WeatherSolve.com
Windbreak Components
www.WeatherSolve.com
www.WeatherSolve.com
www.WeatherSolve.com
Many specialized
components.
A testing program for
new components for
strength and fatigue life
www.WeatherSolve.com
Typical Heights (left to right)
10m to 20m small tripod
15m to 30m large tripod
15m to 30m 3 leg truss
2m to 15m cantilever pole
Note: all structures custom designed
Pole spacings typically 15m to
30m. (Usually longer spacings
for longer runs and higher
poles)
www.WeatherSolve.com
Extreme Wind Considerations
www.WeatherSolve.com
The stress-rated UltraclipThe following 3 pages show how it works to protect the structure in
extreme storms.Note- the stress release
mechanism can be set to any level chosen by the client and the
design engineers.
www.WeatherSolve.com
NORMAL OPERATIONAll clips in placeShock loads from wind gusts absorbed by Fabric, cable , and plastic deformation of clips.
www.WeatherSolve.com
UP TO 30% OVERLOADUpper clips in placeLower nylon clips have released allowing lower hemCable to billow out and spill about 30% of the load.
www.WeatherSolve.com
OVER 30% OVERLOAD (or hem cable fatigue)Upper clips in placeLower hem cable has broken and fabric has pulled out of lockstrip mounted on poles.Some ripping may occur requiring a replacement panel
www.WeatherSolve.com
Stress-rated clip
After hurricane Charlie with lower clips released and poles / cables intact.
www.WeatherSolve.com
Productive environmentsfor all weathers
Custom designed to match your needs.Hurricane and cyclone tested
Bola(1988), Andrew(1992) Charley, Frances, Jeanne (2004)
30 yr worldwide design experience. Patented features.Effectiveness analyses available.
www.WeatherSolve.com
TM