WS410 The Wavion TM WS410 Spatially Adaptive Wi-Fi Access Point transforms wireless metropolitan area networks by overcoming the most chal- lenging barriers to metro Wi-Fi deployment. The WS410 uses patented Wavion technology to take Multiple Input Multiple Output (MIMO) smart-antenna techniques to a new level, employing advanced digital beamforming to dramatically enhance IEEE 802.11b/g wireless networks. The access point delivers the range, coverage, capacity, indoor penetration, and return on investment that make metro-scale outdoor wireless networks practical and profitable. The range of the WS410 covers two to three times the area of conventional Wi-Fi Access Points. Superior range at each node means the network can be scaled to reach a larger group of users, yielding higher subscriber revenues at lower cost in terms of equipment and oper- ating expenses. In addition, networks with ranged-optimizing WS410 access points are simpler to install and easier to maintain. With greater range also comes more and better coverage. The WS410 provides users with a powerful and high quality signal that is not dependent on line-of-sight positioning, and is highly resistant to interference. This results in far fewer dead spots and helps eliminate dis- ruptions caused by both fixed obstacles and changes in the environment. Mobile users get stronger connections with fewer associations between client and access point while the cli- ent is in motion. And network providers can offer a higher quality of service without increasing access point density. WS410 access points also increases the throughputs and the capacity of the network, serving more users per node and boosting throughput for each user. Users can be granted adequate bandwidth for all their applications— now, and in the future as more users and bandwidth-intensive applications are added to the network. High bi-directional link gain allows the WS410 to penetrate buildings and walls better than conventional access points, enabling full net- work access for people—where they live, work, learn, and travel. Deeper indoor penetration also helps eliminate the need for separate indoor Wi-Fi networks. Wavion technology makes metro Wi-Fi infra- structures significantly less costly to install, operate, and maintain. Providers can save on capital and operating expenses, accelerating return on investment and making metro wire- less services affordable for a broad range of municipalities and enterprises. A WS410 deployment needs fewer units, and mini- mizes the need for expensive installs in pre- carious or inconvenient sites. WAVION’S BREAKTHROUGH DIGITAL BEAMFORMING TECHNOLOGY ENABLES SERVICE PROVIDERS, COMMUNITIES, AND ENTERPRISES TO DELIVER SUPERIOR WIRELESS CONNECTIVITY WITH FEWER ACCESS POINTS—AND LOWER COSTS. WS410 Spatially Adaptive Wi-Fi Access Point KEY BENEFITS • Exceptional range, throughput, scalability, and reliability • Excellent building and wall penetration • Uniform coverage and enhanced non-line-of-sight operation • High interference resilience • Robust mobility support • Simple deployment and low operating costs
4
Embed
WS410 - Institut Teknologi Bandungai3.itb.ac.id/~basuki/driver/wavion/Product Marketing Information... · The Wavion WS410 access point uses six radio transceivers and six antennas,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
WS410
The WavionTM WS410 Spatially Adaptive Wi-Fi
Access Point transforms wireless metropolitan
area networks by overcoming the most chal-
lenging barriers to metro Wi-Fi deployment.
The WS410 uses patented Wavion technology
to take Multiple Input Multiple Output (MIMO)
smart-antenna techniques to a new level,
employing advanced digital beamforming to
dramatically enhance IEEE 802.11b/g wireless
networks. The access point delivers the range,
coverage, capacity, indoor penetration, and return
on investment that make metro-scale outdoor
wireless networks practical and profitable.
The range of the WS410 covers two to three
times the area of conventional Wi-Fi Access
Points. Superior range at each node means the
network can be scaled to reach a larger group
of users, yielding higher subscriber revenues
at lower cost in terms of equipment and oper-
ating expenses. In addition, networks with
ranged-optimizing WS410 access points are
simpler to install and easier to maintain.
With greater range also comes more and better
coverage. The WS410 provides users with a
powerful and high quality signal that is not
dependent on line-of-sight positioning, and is
highly resistant to interference. This results in
far fewer dead spots and helps eliminate dis-
ruptions caused by both fixed obstacles and
changes in the environment. Mobile users get
stronger connections with fewer associations
between client and access point while the cli-
ent is in motion. And network providers can
offer a higher quality of service without
increasing access point density.
WS410 access points also increases the
throughputs and the capacity of the network,
serving more users per node and boosting
throughput for each user. Users can be granted
adequate bandwidth for all their applications—
now, and in the future as more users and
bandwidth-intensive applications are added to
the network.
High bi-directional link gain allows the WS410
to penetrate buildings and walls better than
conventional access points, enabling full net-
work access for people—where they live, work,
learn, and travel. Deeper indoor penetration
also helps eliminate the need for separate
indoor Wi-Fi networks.
Wavion technology makes metro Wi-Fi infra-
structures significantly less costly to install,
operate, and maintain. Providers can save on
capital and operating expenses, accelerating
return on investment and making metro wire-
less services affordable for a broad range of
municipalities and enterprises. A WS410
deployment needs fewer units, and mini-
mizes the need for expensive installs in pre-
carious or inconvenient sites.
WAVION’S BREAKTHROUGH DIGITAL BEAMFORMING TECHNOLOGY ENABLES SERVICE PROVIDERS,
COMMUNITIES, AND ENTERPRISES TO DELIVER SUPERIOR WIRELESS CONNECTIVITY WITH FEWER
Wavion Spatially Adaptive Access Point Wavion breaks through the barriers of conventional Wi-Fi solutions by providing seamless, ubiquitous broadband service for the mobile population.
SCALABLE VOICE OVER WI-FI The WS410 provides strength and clarity of voice
transmissions by reducing latency and jitter. The higher
throughput offered by the WS410 also contributes to voice
quality by minimizing delays.
SUPERIOR MOBILITY SUPPORTThe WS410 supports mobile users by tracking them on a per-
packet basis to ensure highest performance at all times.
SSID, VLAN, AND SECURITY SUPPORTThe WS410 supports up to 16 Service Set Identifiers (SSIDs)
and up to 16 virtual LANs (IEEE 802.1q VLANs) for whole-
sale and retail services. Different security options can be
associated to each VLAN.
To prevent unauthorized network intrusion, the WS410
supports Wi-Fi Protected Access (WPA) and is software upgrad-
able to WPA2 Enterprise (IEEE 802.11i) security methods.
COMPREHENSIVE MANAGEMENT TOOLSThe WS410 Spatially Adaptive Access Point is a highly
manageable device with a complete suite of remote
management capabilities, including web-based configura-
tion and Simple Network Management Protocol (SNMP)
traffic monitoring with a full set of system performance and
switching statistics. The onboard management system
features an easy-to-use graphical user interface.
VERSATILE IMPLEMENTATIONOne WS410 can serve up to 254 clients. Ruggedized and
weatherproof, the access points may be mounted on light
poles, rooftops, or any other suitable outdoor location, and
can be easily integrated with other backhaul options.
1190 Saratoga Avenue • San Jose, California 95129 • USA | Main: 408.261.7000 Fax: 408.261.70016 Ha’yetsira Street, PO Box 580 • Yoqne’am-Illit 20692 • Israel | Main: +972.4.909.7300 Fax: +972.4.909.7322
www.wavion.net
WIRELESSIEEE 802.11b/g compliantFrequency band: 2.4–2.483 GHzModulation: 802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK) TX Power Maximum:(Maximum transmit power will vary by channel and data rate) 802.11b and 802.11g Total Directed Power 42.5 dBm Calculatedfrom: EIRP 34.5 dBm Beam Forming Gain 8 dBEIRP Calculations: Radio Power 19 dBm Antenna Gain 7.5 dBi Antenna Array 8 dBTotal EIRP 34.5 dBmRX Sensitivity (typical):
Note: UtilizingCoherentCombinationofsignalsAntenna Array: Six 7.5 dBi omni-directional antennas
NETWORKING AND QoS Full 802.11b/g client compatibility 16 VLANs 16 SSIDs
SECURITYWEP (64 bit or 128 bit)WPA: Encryption: TKIP Authentication: Pre-Shared Key or 802.1x with RADIUS Server
(EAP-TLS, PEAP, EAP-TTLS)VPN pass-throughHTTPS for Web-based management tools
MANAGEMENTWeb-based configuration and management toolSNMPv2 with standard and Wavion MIB supportConfiguration save and restoreNetwork and client statistics
PHYSICAL SPECIFICATIONSNetwork Interface: Auto-sensing 10/100 Ethernet Input High Power over Ethernet (HPoE)Auxiliary Network Interface: For connection to a backhaul interface where PoE to the backhaul
device is required Auto-sensing 10/100 Ethernet Power over Ethernet (PoE) 802.3afPower Input: Weather-tight power connector plug for 105-240 VAC power inputIndicator lights: Two Ethernet port LED indicators System Status LED indicator RF channel status indicatorPhysical Dimensions (without mounting brackets): Base Section: 13 in (33 cm) Diameter, 5 in (12 cm) Height
Antenna Array: 17 in (43 cm) Height Weight: 20 lbs (9 Kg)
POWER Power input: 100–240 VAC 50/60Hz , 80W (up to 105W with external attached device using
PoE output) weather-proof power cable, with standard AC connector or street light NEMA photo-electric control power tap
265–480 VAC Street Light 60Hz; Street light NEMA photo-electric control power tap
48VDC, 49 W for low temperature operation using PoE supplied from an indoor power injector
56VDC, 24 W supplied using HPoE from indoor power injector
Output PoE option for powering an external device
MOUNTING OPTIONSRoof mounting: 100-240 VAC or power injector for HPoELight pole mounting: 105-260 VAC or 480 VAC street light power tap
ENVIRONMENTAL Operating temperature range: -40°C to +50°CStorage temperature range: -45°C to +85°CWeather rating: IP65Wind survivability: 165 mphShock & Vibration: ESTI 300-192-4 spec T41.ETransportation: ISTA2A
OPTIONAL ACCESSORIESPart Number ProductWS410AP-01-AA Wavion Switch 410, 2.4 GHz, Input power 100-240 VAC
50/60 Hz, Output power 48-VDC
Part Number AccessoriesWS410PI-01-AA Power Injector for Wavion Switch 410, A/C Input
90-264 VACWS410PC-12-AA Power Cable for Wavion Switch 410, 110 VAC, 20 feetWS410PC-02-AA Power Cable for Wavion Switch 410, 110 VAC, 6 feetWS410PC-03-AA Power Cable for Wavion Switch 410, 110 VAC,
20 feet (INTL)WS410PC-04-AA Power Cable for Wavion Switch 410, 110 VAC, 6 feet (INTL)WS410PT-01-AA Street Light Power Tap for Wavion Switch 410,
110/220 VAC, 30 feetWS410PT-02-AA Street Light Power Tap for Wavion Switch 410,
110/220 VAC, 6 feet
APPROVALSRF: FCC CFR part 15, Class CSafety: TUVus, UL 60950-1:2003, CAN/CSA-C22.2 No. 60950-1-03EMC: 47 CFR Part 15, Sub Part B, Class B (USA) (pending)