Written By: Yesenia · Samsung NX1000 Menu Button Replacement This will guide you through replacing the Menu Button. Written By: Yesenia Samsung NX1000 Menu Button Replacement Guide
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Samsung NX1000 Menu Button ReplacementThis will guide you through replacing the Menu Button.
Written By: Yesenia
Samsung NX1000 Menu Button Replacement Draft: 2015-06-16Guide ID: 36852 -
This document was generated on 2019-09-22 02:52:07 AM (MST).
If your menu button is not working properly or sticking or is even chipped or cracked and you wish toreplace it here is the guide needed. Make sure you turn off the camera and remove the batterybefore you begin the replacement.
TOOLS:Metal Spudger Set (1)iFixit Opening Tools (1)Phillips #000 Screwdriver (1)
Samsung NX1000 Menu Button Replacement Draft: 2015-06-16Guide ID: 36852 -
This document was generated on 2019-09-22 02:52:07 AM (MST).
Do not completely separate the back panel from the camera. There is a ribbon on bottom left backcorner underneath the buttons. The ribbon will hold the back panel to the camera. Do not jam thetool in this part or the ribbon will rip.
Samsung NX1000 Menu Button Replacement Draft: 2015-06-16Guide ID: 36852 -
This document was generated on 2019-09-22 02:52:07 AM (MST).
To reassemble your device, follow these instructions in reverse order.
Step 9
Use the metal spudger to pick thebottom of the plastic piece whilesimultaneously using your indexfinger to push down on the largermetal slab. This will cause the metalplate with the large ribbon to slidedown and out of the plastic backpanel.
Do not disconnect the blue ribbon.
Step 10 — Menu Button
Remove the button assembly fromthe back panel
Samsung NX1000 Menu Button Replacement Draft: 2015-06-16Guide ID: 36852 -
This document was generated on 2019-09-22 02:52:07 AM (MST).