Canon AE-1 Film Rewind Crank Replacement It is possible after use or damage that the film rewind crank could become damaged or broken. This guide will give you the steps needed to replace the film rewind crank. Written By: Ben Barber Canon AE-1 Film Rewind Crank Replacement © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Canon AE-1 Film Rewind Crank ReplacementIt is possible after use or damage that the film rewind crank could become damaged or broken.
This guide will give you the steps needed to replace the film rewind crank.
Written By: Ben Barber
Canon AE-1 Film Rewind Crank Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5
TOOLS:Phillips #00 Screwdriver (1)
Flathead 3/32" or 2.5 mm Screwdriver (1)
PARTS:Replacement film rewind crank (1)
Canon AE-1 Film Rewind Crank Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5
Step 1 — Film Rewind Crank
Open film door
Place screwdriver in slot as shown
Step 2
Use screwdriver to prevent shaftfrom turning
Rotate crank counter clockwise toremove crank
Canon AE-1 Film Rewind Crank Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5
To reassemble your device, follow these instructions in reverse order.
Step 3
Remove the two screws
Remove silver pate
Step 4
Remove film rewind crank
Canon AE-1 Film Rewind Crank Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5
This document was last generated on 2017-06-21 09:05:33 PM.
Canon AE-1 Film Rewind Crank Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5
Related Documents
