Using the Blue Ethernet cable, connect the LAN port of the Fibre Unit (ONT) to the blue port labelled “WAN” on the back of the router Plug the power supply unit into the wall socket and connect the small round plug from the power supply unit into the power socket on the back of the router. Switch the power on at the wall socket and press the red power button on the back of the router. The power LED on top of the router will light up. You will need a second LAN cable for this step. Plug one end of the LAN cable into the LAN port of your PC Plug the other end of the LAN cable into the yellow LAN port labelled LAN1, LAN2, LAN3, or LAN4 on the back of the router Follow to connect without a second LAN cable. The default SSID (WiFi Network Name) and WiFi key (WiFi Password) are displayed on the bottom of your router. Ensure that the WLAN LED on top of your router is lit up. If the LED is not lit, open a web browser on your device and type 192.168.1.1 into the address bar at the top. Enter the username and password (admin/admin). Click on WLAN in the menu on the left. Click on Basic Settings and uncheck the box named “Disable WLAN Interface”. On your WiFi-enabled device, browse for and select the router’s SSID (WiFi Network Name). Use the WiFi key when prompted to connect your device to the WiFi network. If your WiFi-enabled device is equipped with a WPS button, press the WPS button on the back of the router until the WPS LED blinks. Press the WPS button on the WiFi-enabled device and allow 2 minutes for a secure WiFi connection to be established. Open an Internet browser (e.g. Google Chrome) on your device. Enter 192.168.1.1 into the address bar and enter the default username (admin) and password (admin). Follow the Quick Setup instructions to complete the Fibre configuration on your device. If you are having trouble, contact MWEB Tech Support for Help. WR7010 CONNECTING THE POWER SUPPLY UNIT CONNECTING A DEVICE TO THE ROUTER WITH WiFi CONNECTING A DEVICE TO THE ROUTER WITH WiFi IN THE BOX Quick Start Guide Fibre WiFi Router (WR7010) Power Supply Unit Blue Ethernet Cable CONNECTING A DEVICE TO THE ROUTER VIA A LAN CABLE CONNECTING TO FIBRE FIBRE WiFi ROUTER CONFIGURE YOUR ROUTER