Woven Wire Partitions

i t ’s what you make of them!

840STY

LE

more great ideas ins ide…

®

W O V E N W I R E P A R T I T I O N S

www.southwestsolutions.com

Style 840

System Benefits

The amazingly versatile woven wire partition.

WireCrafters, LLC • Louisville, Kentucky www.wirecrafters.com

The Proven Style of Today’s Wire PartitionFor over 35 years, Wire Crafters has manufactured what wefeel is the “Very Best Woven Wire Partition.” Contrary totraditional systems, our Style 840 is based on the simpleidea that panels stack one on top of the other betweentubular posts to reach the finished partition height. Thisall-welded, modular, stackable system has benefitsunequaled in the industry.

The Style 840 Solution

Index

1

Style 840 System Benefits . . . . . . . .1Panels & Posts . . . . . . . . . . . . . . . .2Hinged Doors . . . . . . . . . . . . . . . . .3Doors & Windows . . . . . . . . . . . . . .4Ceilings and Door Openers . . . . . . . .5Standard Locks . . . . . . . . . . . . . . . .6Custom Locks . . . . . . . . . . . . . . . . .7Pallet Rack Back . . . . . . . . . . . . . . .8Pallet Rack Enclosures . . . . . . . . . . .9Physical Barriers . . . . . . . . . . . . . .10Alternative Materials . . . . . . . . . . .11Also Available:

MezzaRail Mezzanine Railing . . . .12Storage Lockers . . . . . . . . . . . . .12DEA Storage Cages . . . . . . . . . . .12Guard Rails . . . . . . . . . . . . . . . .12

Estimating Worksheet . . . . . . . . . .13Style 840 Specs . . . . . . . . . . . . . .14Color Chart . . . . . . . . . . . . . . . . . .14

• MODULAR DESIGNTwenty basic panelsand our “buildingblock” approachaccomplish virtuallyany layout.

• STRONGPanels bolt directly tosupport posts.Standard 3/8” wedgeanchors hold partitionfirmly in place. Baseplates welded on postsallow direct flooranchoring.

• SECUREUtilizes the heaviestassembly hardware inthe industry. Bolts areonly accessible frominside.

• FAST INSTALLATIONFewer parts than stan-dard partition systems.Angle frames give clearaccess to all mountinghardware.

• CLEAN DESIGNStraight lines andclean exterior makes ahandsome finishingtouch.

• FLEXIBLEEasy to reconfigure asneeds change.

Stock items are avail-able for shipmentwithin 48 HOURS OFYOUR ORDER.


Panels & Posts

PanelsPosts

Simple, economical, modular design

MODULAR PANELS• Ten widths, 1’ to 10’ in one foot

increments.• Two heights: 4’-0” and 5’-0”.• Full height partition walls are built

by stacking two or more panelsbetween posts.

• Mesh: 10 gauge wire woven into 2" x 1" rectangular openings.

• Frame 1-1/4" x 1-1/4" x 1/8" steelangle.

• Custom size panels available.• Alternate meshes available, see

page 11.

ADJUSTABLE PANEL• Solid sheet metal panel.• Fill small gaps in runs.• Allows for adjustment from 1" to 11".• Ideal for hard to measure areas.• Two heights: 4' and 5' match panel

heights.

2WireCrafters, LLC • Louisville, Kentucky www.wirecrafters.com

BASE PLATEDETAIL

TEE POST INSIDEVIEW

CORNER POSTOUTSIDE VIEW

RUN POSTINSIDE VIEW

STACKABLE PANELS

ADJUSTABLE PANEL

POSTS• Stock sizes: 8’-5 1/4”,

10’-5 1/4”, 12’-5 1/4”.• Standard hole layout allows

for 3-1/4” sweep-space.• Posts project 2” above top

of panel.• Standard Baseplate: 2” x 7”

with holes for anchors.• Special length posts are

available to 40’.• Oversized baseplates are

available.• Floor anchors (3/8”) are

included with your order.

WOVEN WIRE PANELS 4 Ft. HighPart No. Width x Height Weight 104 10’-0” x 4’-0” 6394 9’-0” x 4’-0” 5884 8’-0” x 4’-0” 5374 7’-0” x 4’-0” 4664 6’-0” x 4’-0” 4154 5’-0” x 4’-0” 3644 4’-0” x 4’-0” 3134 3’-0” x 4’-0” 2324 2’-0” x 4’-0” 1814 1’-0” x 4’-0” 13

WOVEN WIRE PANELS 5 Ft. HighPart No. Width x Height Weight105 10’-0” x 5’-0” 7495 9’-0” x 5’-0” 6885 8’-0” x 5’-0” 6375 7’-0” x 5’-0” 5465 6’-0” x 5’-0” 4855 5’-0” x 5’-0” 4245 4’-0” x 5’-0” 3635 3’-0” x 5’-0” 2725 2’-0” x 5’-0” 2215 1’-0” x 5’-0” 16

ADJUSTABLE PANEL Part No. Width x Height Weight AP4 1' 3-7/8" x 4' 0" 13AP5 1' 3-7/8" x 5' 0" 16

STOCK SIZE POSTPart No. Height WeightRP-8Run 8’-5-1/4” 20CP-8/TP-8Corner/Tee 8’-5-1/4” 21RP-10Run 10’-5-1/4” 23CP-10/TP-10Corner/Tee 10’-5-1/4” 24RP-12Run 12’-5-1/4” 33CP-12/TP-12Corner/Tee 12’-5-1/4” 33


Hinged DoorsSecured Access to Your Storage Areas

DUTCH DOORSSame as Hinged Door except:• Two separate operating door leafs.• Bottom leaf locks with padlock,

cylinder lock available.• Top leaf locks to bottom with

spring bolt.• 10 gauge shelf, 18” deep x door

width fixed to bottom leaf.• Must specify hand and swing of door.


HINGED DOORSOpening

Part No. Width x Height Weight

HD-37-8 3’-0” x 7’-3 1/4” 106HD-47-8 4’-0” x 7’-3 1/4” 118HD-37-10 3’-0” x 7’-3 1/4” 123HD-47-10 4’-0” x 7’-3 1/4” 139

DOUBLE-HINGED DOORSOpening


DHD67-8 6’-0” x 7’-3 1/4” 170DHD87-8 8’-0” x 7’-3 1/4” 193DHD67-10 6’-0” x 7’-3 1/4” 190DHD87-10 8’-0” x 7’-3 1/4” 217

DUTCH DOORSOpening


DD37-8/Swing Out 3’-0” x 7’-3 1/4” 125DD47-8/Swing Out 4’-0” x 7’-3 1/4” 142DD37-10/Swing Out 3’-0” x 7’-3 1/4” 145DD47-10/Swing Out 4-0”’ x 7’-3 1/4” 166

HINGED DOOR DUTCH DOORDOUBLE-HINGED DOOR

S T Y L E 8 4 0 W O V E N W I R E D O O R S

3

HINGED DOORS• 3’ or 4’ wide by 7’ 3-1/4” high

opening.• Transom panel sized to match

partition height.• Three 4” x 4” 10 gauge tight

pin hinges.• Padlock lugs standard, cylin-

der locks available.• Complete with two door posts

and hardware.• Universal construction, works

for left or right hand, inside oroutside swing.

DOUBLE-HINGEDDOORS• 6’ or 8’ wide by 7’ 3-

1/4” high opening. • Inactive leaf secured

by cane bolt (base)and chain bolt(top).

• Padlock lugs stan-dard, cylinder locksavailable.

• Complete with twodoor posts and allhardware.

• Transom panel sizedto match partitionheight.

• Custom size and noover head obstruc-tion doors available.


Doors & WindowsA Wide-Range of Products to Fit Your Needs


STYLE 840 WOVEN WIRE DOORS SLIDING DOORS


SD-38-8 3’-0” x 8’-1/4” 124SD-48-8 4’-0” x 8’-1/4” 137SD-58-8 5’-0” x 8’-1/4” 149SD-68-8 6’-0” x 8’-1/4” 196SD-88-8 8’-0” x 8’-1/4” 230SD-108-8 10’-0” x 8’-1/4” 279SD-310-10 3’-0” x 10’-1/4” 149SD-410-10 4’-0” x 10’-1/4” 168SD-510-10 5’-0” x 10’-1/4” 185SD-610-10 6’-0” x 10’-1/4” 234SD-810-10 8’-0” x 10’-1/4” 277SD-1010-10 10’-0” x 10’-1/4” 334

4

SLIDING DOOR

TOP VIEW

ELEVATION

TUNNEL DOOR

SERVICE WINDOW

SLIDING DOORS

• 3’, 4’, 5’, 6’, 8’ or 10’ widths.• Full height partition openings of

8' and 10'.• Padlock lug standard, cylinder

lock available.• Complete with two door posts,

two 4 wheel trolley trucks, 16gauge track, and all hardware.

• Universal construction, works forleft/right hand, inside/outside.

• Custom sizes available.

Inset Photo: Our patented tamper-resistant sliding gate receiver.U.S. Patent # 6196034B1

TUNNEL DOORS

• Designed for no overheadobstruction.

• Leading edge of door rolls onfloor casters.

• Rear of door hangs from doortrack.

• All sizes made to order.• Ideal for high traffic areas, and

overhead crane access.

SERVICE WINDOWS

• Lockable, slide-up windowsecures opening when unattend-ed.

• Window opening: 24” wide x 20-1/2” high.

• Shelf size: 24” wide x 18” deepx 10 gauge.

• Shelf height: 42-1/4” off of floorlevel.

• Panel size: 4’-0” wide x 8’-0”high; transoms extend height to10’ or 12’.

• Counter balanced, hinged, ormechanically operated windowsin various sizes are available.


Ceilings & Openers


CLEAR-SPAN CEILINGS• Ceiling panels interchange-

able with wall panels.• Attach to partition walls

with slotted angle.• Clear spanned up to 35'.• Large ceilings supported by

horizontal ceiling tubes.• Add to existing partition

without changing layout. • All ceilings are non-load

bearing.• Ceiling cutouts or drop

down doors available.

• Sized to customer requirements.• Gate slides up an out of the way.• Counter balanced, pneumatic, and

electric operators available.• Often used with vertical lifts. • Can be integrated with automated

storage/retrieval systems.

VERTICAL RISE GATES

IntegratedVertical RiseGate andConveyor System

DOOR OPENERS AND SELF-CLOSING GATESELECTRIC DOOR OPENER Uses standard 110volt single phase electric motor with rack andpinion drive. Supplied with radio frequencyremote controls, self closing timer, anti-crushsafety switch, and photo eye safety switch,stationary push button control, electro-mag-netic locks optional.

PNEUMATIC DOOR OPENERRequires facility supplied compressed air of 40psi. Cylindersoperated by stationary palm button, lever valve, or electric

solenoid. Works with vertical rise or slide to side gates.

SELF CLOSINGSLIDING GATES

Requires no externalpower source. Counter

balanced weight and pul-ley system closes and

locks gate upon release.

5

HINGE DOOR CLOSER Commercialgrade hydraulic door closer causesdoor to close and latch upon release.


Standard LocksStandard Fronts and Backs Ship Within 48-Hours.


STANDARD CYLINDERS:• Standard locks are supplied

keyed different.• Keyed alike locks available• Optional Master Key available

ALTERNATE CYLINDERS:• Best Cylinder® Less Core• Any 1” mortise cylinder

keyingoptions

STAN

DARD

FRO

NT (S

F-1)

ALT

ER

NA

TE

FR

ON

TS

ALT

ER

NA

TE

B

AC

KS

ALTERNATEFRONTS work withany of the threebacks shownbelow.

ALTERNATEBACKS work withany of the locksshown to the left.(SF-2) Thumb-Turn

Latch… latches only,does not lock.

(SF-3) Door KnobEntry… latches only,does not lock.

STAN

DARD

BAC

K (S

B-1)

(SB-2) Interior Key…lock from both sides,keyed to match face side.

(SB-3) Door Knob…typical size door knobfor easy exit.

(SB-4) Lever Handle...alternative to standarddoor knob. Meets ADArequirements.

Put our lock“Know-How”to the test!

Let us know if youneed a speciallocking device. Wehave experiencewith many differ-ent lock styles. Letus put our experi-ence to work foryou. Call toll-freetoday for moreinformation, orcontact theWireCrafters dealernearest you. Call800-626-1816!

6www.southwestsolutions.com

Custom LocksMakes a Great Product…Even Greater.


ELECTRICAL LOCKING DEVICES LEVERHANDLES

OTHERBACKOPTIONS

CODEDENTRY

(CF-1) Master Lock® ADAHandle…meets ADA require-ments, available with or withoutkey lock. (Key Lock shown)

(CF-2) Five-Button CodedAccess Lock …code or keyentry. Match with push paddleor thumb turn knob inside.

(CB-2) Push Paddle…hand-sized paddle for quick exit.Match with key or five-digitpush button lock.

(CB-4) AlarmLock…soundsbattery pow-ered alarmwhen opened.Available withor withoutexterior keyaccess.

(CB-3) PushBar…push barruns full widthof door. Matchwith key or five-digit push but-ton lock.

7

(CE-1) Coded CardReader …activateselectric strike ormagnetic lock uponinsertion of codedcard. Ten cards sup-plied. Requires keypad controller forcard activation. Cardreaders available onhinged and slidinggates.

(CE-2) Ten-DigitKey Pad…operateselectric strike ormagnetic lock uponentry of four-digitpass code.Programmable up to64 different codes.Numeric key padsavailable on hingedand sliding gates.

(CE-3) Electro-Magnetic Lock…magnetically lockssliding gates secure-ly closed. Requirescard code reader,ten-digit key pad orremote push buttonto operate.Available for slidinggates only.

(CE-4) ElectricStrike…allowshinged gates toopen when activat-ed by encoded card,ten-digit key pad, orremote push but-ton. Works withstandard key locks.Available onhinged gates only.

(CB-1) Master Lock® ADAHandle …meets ADA require-ments, available with or withoutkey. (Twist button lock shown)


POPULAR RACKBACK PANEL SIZESPanels stocked in 1’ wide increments. Custom sizesavailable – Call for details. Four brackets per panelare required for installation.

FOUR FOOT PANELS


124 12’-0” x 4’-0” 77

104 10’-0” x 4’-0” 63

94 9’-0” x 4’-0” 58

84 8’-0” x 4’-0” 53

FIVE FOOT PANELS


125 12’-0” x 5’-0” 90

105 10’-0” x 5’-0” 74

95 9’-0” x 5’-0” 68

85 8’-0” x 5’-0” 63

Rack BackTM

Pallet Rack Backing


“BACK ANY RACK” WITHWIRECRAFTERS MODULARPANEL SYSTEM.Sturdy framed panels provide hassle-free installation by bolting directly torack uprights with our right anglemounting brackets. Panels may beextended above the rack with our“above-the-top” extension supports.

• Mounting brackets bolt directly torack uprights, panels bolt to brackets.

• Off-set brackets allow for load tooverhang rack beams.

• Creates sturdy barrier betweenstocked items and the ground below.

• System installs quickly, with stan-dard nuts and bolts.

• Panels may be extended above thelast beam to contain top loads.

• Backing may be started at floor, orat any level where protection isrequired.

• Prevents spills into walkways andother personnel areas.

OFF-SET MOUNT BRACKETSPanels mount to the pallet rack uprightwith an offset bracket. Mounting bracketsfrom flush mount to 12" off-set available.Four brackets are required per panel.

SLOTTEDANGLE

PANEL

TOP OFRACK

ANGLE CLIPEND VIEW

SLOTTEDANGLE BRACE

RACK BACK™ iseasy to order Fax or call with the following infor-

mation and we’ll fax back a quoteand layout drawing in no time –most always on the same day.

A Beam width between rack uprights

B Upright widthC Overall number of baysD Required offset dimension from

upright to panel (to allow forpallet overhang)

E Mounting height above floor(if not flush-to-floor)

F Overall height of rack uprightsG Desired backing heightA

C

E

F

G

D

B

8

“ABOVE THETOP” EXTENSIONContain loadsstored on thetop beam. Anglesupports extendabove the rack,anchoring theRACK BACKTM

panel securelyin place.


Rack EnclosuresPallet Rack BackTM Enclosures


PALLET RACK DOUBLE-HINGED GATES• Ideally suited for single bay

applications.• Mount directly to the rack

uprights.• Full height doors available up

to 20-feet tall. • Locking options available for

added security.

PALLET RACK SLIDING GATES• Ideally suited for multi-bay

application.• Our unique “double track”

system keeps doors out ofyour way, and aisles clear ofobstruction.

• Full height doors availableup to 20-feet tall.

• Locking options availablefor added security.

Gates

COMPLETELY ENCLOSE YOURPALLET RACK SYSTEM AND SECUREINVENTORY!It’s so simple to add extra security toyour pallet rack system withWireCrafters hinged and sliding gates.Control access and prevent inventorytheft with our pallet rack enclosures.

CUSTOM DESIGNED GATES.Due to the wide-array of sizes avail-able, our in-stock sliding and hingedgates work for nearly every pallet rackapplication. When your project calls fora special size, we offer custom designand manufacturing.

RACK ENCLOSURESSECURE INVENTORYA Rack Back enclosure will controlaccess to, and help prevent theft of,your high valued inventory items. Acomplete enclosure consists of panelson the back, ends, and top of the rack,with access gates on the front.Different configurations may beinstalled according to your specificneeds.

9www.southwestsolutions.com

Physical Barriers


STANDARD 5’ HIGH PANELSPart No. Width Weight105 10’ 7495 9’ 6985 8’ 6375 7’ 5465 6’ 4855 5’ 4245 4’ 3635 3’ 2725 2’ 2215 1’ 16

The sizes listed are stock items. Custom sizes available.

POSTSPart No. Height Sweep SpaceRP6 6’-2” 1’-0”CP6 6’-2” 1’-0”

GATESPart No. Opening Width TypeHD3 3’-0” x 5’-0” HingedHD4 4’-0” x 5’-0” Hinged

PHYSICAL BARRIERSWoven wire panels provide a sim-ple but effective way to protectpersonnel from the dangers ofautomated equipment. The versa-tility our Style 840 Systemallows us to meet many differentcustomer demands while usingstandard product. Variousheights, sweep spaces, lift outsections, non-right angle cor-ners, heavy mesh, lexan panels,sheet metal panels, are all easilyaccomplished with our basicdesign. Some examples of ourbarriers are pictured above. Callus with your requirements.

OPTIONS• Weld curtains• Diamond Style Barrier• Aluminum Extruded Frame

Barriers

COLORSThe Physical Barrier may beordered in any color. Our stan-dard color is gray. The combina-tions of yellow, or yellow andblack shown are options.

Physical BarriersPHYSICAL BARRIER BARRIER WITH WELD CURTAINS

DIAMOND STYLE BARRIER ALUMINUM EXTRUDED FRAMES

10

Adds Safety to the Workplace

TYPICAL ELEVATION

TOP VIEW OF ADJUSTABLE MOUNTING


Alternate Materials

sheet metal, lexan® and expanded metalspecial m

esh

Choose from Special Meshes, Sheet Metal and Lexan

Other materials can be used when ourstandard 2" x 1" opening mesh does notmeet your needs. WireCrafters stocks sev-eral different sized meshes, sheet metal,lexan, expanded metal and welded wirefor these special applications. Several of

the more popular items are picturedbelow. Our large inventory and modernmanufacturing techniques allow us tomake fast delivery of custom product, giv-ing you an edge on the competition.

WireCrafters can upgrade the panelframes to larger angle, and increase thetubing size of the posts to meet yourexact requirements. We are experiencedwith these special projects and welcomethem.

1/2” center-to-center square12 gauge (3/8” square opening)Uses: Any application whichrequires control over small items.• Machine guards• Small liquor bottles• Federal Reserve• Drug control

1-5/8” center-to-center square8 gauge (1-1/2” square opening)Uses: Galvanized partitions This heavy mesh eliminates warpingwhich may occur during the hot dipgalvanize process.Also used when our standard 2” x1” 10 gauge is not strong enough.

2-1/4” center-to-center square6 gauge (2” square opening)Uses: Heavy duty construction• Government facility import areas• Police holding cells• Prison lockup areas

2” center-to-center square 8 gauge welded wire mesh (1-7/8” square opening)

3/4” center-to-center square 10 gauge (5/8” square opening)

1-1/2” diamond mesh10 gauge

WireCrafters, LLC • Louisville, Kentucky www.wirecrafters.com11

EXPANDED METAL

LEXAN® CLEAR VIEW PANELS16-GAUGE SHEET METAL


Also available

Storage Lockers/Guard Rails

Unique Woven Wire Applications

WireCrafters, LLC • Louisville, Kentucky www.wirecrafters.com12

GUARD RAILSWhen Safety and ProtectionMatter…• Constructed from heavy-duty

11-gauge formed steel.• Mounting columns are avail-

able in two styles – singlerail (17” height) or doublerail (43” height).

• Lift-out rails allow easyaccess to protected areas.

• Base plates, for mounting tofloor, are 10” square and comewith four 7/8” holes for flooranchors (included).

• Rails are available in 2’, 4’, 6’,8’, and 10’ lengths.

• Competitively priced.• For more information request

our Protective Railing brochure.

STORAGE LOCKERSWireCrafters’ Woven WireStorage Lockers are ideal forsmall enclosures. The units maybe used individually or as agroup. Two styles of lockers,single and double-tiered, areavailable in a variety of widths

and depths. Doors are prehungin angle frames which connectdirectly to wall panels. Two-sided units fit in the corner ofexisting rooms. Free standingunits may be installed any-where. For more information askfor our Locker Brochure.

OPEN MESH LOCKERS SHEET METAL LOCKERS

MEZZARAIL® WireCrafters combinedthe strength of squarehandrail with the ver-satility of woven wirepartition to create aunique handrail formezzanines. MezzaRail,designed to replacemultiple rail systems,out performs them too.With its built-in kickplate and top rail,

MezzaRail sets upquicker – just two boltsper section – and actsas a barrier. Objectsthat pass through amulti-rail system arerestrained byMezzaRail. Meets BOCAand OSHA codes forhandrails. For moreinformation request ourProtective Railingbrochure.

DEA APPROVEDENCLOSURESWhen properlyinstalled, WireCraftersStyle 840 Partitionsmeet or exceed therequirements for stor-age of Class III, IV andV controlled substancesas outlined in Section1301:72 of the Code.For these applicationsthe enclosure must betotally secure, gaps

between the partitionand building structuremay not exist. Doorsmust be self-closingand self-locking; allhardware must bebrazed, pinned or tackwelded in place. Formore information visitwww.wirecrafters.com


SSG Wire Partition Worksheet

specs

PLEASE NOTE…Representation of color is as close as printing techniques allow.Actual color may vary slightly.

Standard Color

Optional Colors

Gray

6208 Strawberry Lane Louisville, KY 40214

800/626-1816502/363-6691502/361-3857 FAXwww.wirecrafters.com

®

Style 840 SpecsPanels, Posts, Doors, Hardware & Finishes

Blue

Safety Yellow

Orange

Tan

White

Red

Black

PANELS Panels are constructed of 10gauge steel wire, woven into 2”x 1” rectangular mesh andsecurely welded to a 1-1/4” x1-1/4” x 1/8” steel angleframe. Frames have 7/8” x7/16” slotted holes for mount-ing to posts and adjacent pan-els. Panels four to seven feetwide have one 1/4” x 3/4”stiffener welded to the frame.Wider panels have two stiffen-ers.

POSTSPosts are made of 2” x 2” x 14gauge (.083) steel tubing.Base plates of 2” x 7” x 1/4”steel flat with two 7/16”round holes for floor anchor-ing, are welded to each. Top ofpost is finished with decora-tive cap. Posts are drilled with1/2” holes to accept hardwarefor mounting panels and doors.Hole spacing is set to leave a3-1/4” sweep space below thepanels. Posts have a 2” projec-tion above the panels.

DOORSDoors are constructed of 10gauge steel wire, woven into 2”x 1” rectangular mesh andsecurely welded 1-1/4” x 1-1/4” x 1/8” steel angle frame.Stiffeners, two horizontal andone vertical, of 1/4” x 3/4”steel flat are securely weldedto the frame behind the mesh.Two gate posts, hardware, andpadlock lugs are supplied witheach door. Cylinder locks areavailable.

HARDWAREAll erection hardware is sup-plied. Panel mounting hardwareis 3/8” standard thread gradetwo plated fasteners. Flooranchors are 3/8” wedge type.

FINISHStandard finish for non-platedparts is one coat of grayacrylic enamel. Standard GrayColor, Optional In-Stock Colorsand Custom Matched Colors areavailable in polyester-epoxyhybrid powder coat and tradi-tional liquid acrylic enamel fin-ish. Unless otherwise specifiedall pricing is based on standardgray liquid coating.



Woven Wire Partitions

Business

woven into2 x

deep x doorwidth

width x height weightdd37

width x height weightap4

width x height weighthd

width x height weightdhd67

width x height weight104

width x height weight105