World Class Standards IMS Interoperability Testing - from Standards to Practice Giulio Maggiore ETSI TC INT Chairman © ETSI 2010. All rights reserved
Mar 27, 2015
World Class Standards
IMS Interoperability Testing - from Standards to Practice
Giulio MaggioreETSI TC INT Chairman
© ETSI 2010. All rights reserved
World Class Standards
2
ETSI Role in testing
IMS interoperability is a key issue for boosting IMS (IP Multimedia
Subsystem) roll-out and more specifically network interconnection between operators.
Only via thorough testing in practical scenarios can operators ensure operational excellence in a multi-vendor and multi-provider environment.
IMS comprises a set of specifications designed to enable network
operators to implement IP-based networks that can carry services
for both fixed and mobile customers simultaneously.
2
World Class Standards
3
ETSI Role in testing
IMS was developed originally in the mobile world (specifically in the specifications created by the 3rd Generation Partnership Project, 3GPP), and was adopted for fixed networks by ETSI’s TISPAN Technical Committee (Telecoms & Internet Converged Services & Protocols for Advanced Networks).
Advanced communications over the next generation network will
only be delivered if those same networks can interconnect.
3
World Class Standards
4
ETSI Role in testing Testing support to all Technical Bodies early in the process
Interoperability is best achieved when it is designed from the beginning and not “bolted-on” at the end
ETSI is recognized as world leader for Testing and Interoperability Validation of Standards through PlugtestsTM for 10 years Development of Test Specifications for over 20 years
ETSI is between Standardization and industry Interoperability and conformance together Testing methodology TTCN3 and tool prototypes
4
World Class Standards
55
ETSI TC INT (IMS Network Testing)
ETSI TC INTIMS Inter-OP & Interconnect.
Test specs & events
Tec
hnic
al S
trea
mIn
dust
rila
l S
trea
m
Fora and OrganizationDealing with IMS IOP Demonstrations
World Class Standards
6
TC INT (IMS Network Testing)
3 IMS Interoperability Events
IMS Interoperability and Conformance Test Specifications Published
4th IMS Interoperability Event is planned for 12-19 November 2010, Sophia Antipolis in ETSI
World Class Standards
7
TC INT (IMS Network Testing)
Technical scope
3GPP Release 8
Interworking between IMS Core and AS for RCS services (this on request from GSMA RCS IOT group)
Continue basic call, MMTel, hold/resume, topology hiding, IMS roaming testing
Continue IMS to legacy PSTN/PLMN tests (add focus on Mg/Mj)
Testing with IPv6
World Class Standards
8
The awareness of on-going testing activities
Knowledge about test activities will give your company “the right directions”
Participating to PlugtestsTM events will get your company in the “right Place”
Participants to Plugtest have evaluated “experience comparable to more than 6 months testing”
Call For Papers has been issued (CL 2761) Call for Articles for an ETSI Book on “Success Stories in Validation and Testing”
World Class Standards
9
The reuse of test specifications and results
World Class Standards
10
Using publicly available test specification means
World Class Standards
IMS, from Standards to Practice -Technical Challenges for New Service Opportunities
Comparison of advantages and drawbacks of the IMS model compared to the classical NGN
New service opportunities and bringing services to the network quickly
The importance of standardisation and standards
Service options in a converged environment and example use cases
Roland Schott, Project Manager, Technology Engineering Centre, Deutsche Telekom, Germany
11
World Class Standards
Will the EPC make IMS obsolete in NGMNs?
Understanding the role of the EPC (Evolved Packet Core) in the NGMN / 3GPP EPS (Evolved Packet System) architecture
Key EPC architecture and functional capabilities
Comparing EPC and IMS architectures and capabilities
Why IMS: Investigating relevant NGMN applications and the needed platform support
Learning on EPC potentialities – Experiences from the OpenEPC Testbed (www.openepc.net)
Prof. T. Magedanz, TU Berlin / Fraunhofer FOKUS, Germany
12
World Class Standards
13
Useful links Interoperability events:
http://www.etsi.org/Website/OurServices/Plugtests/home.aspx
Presentation on Achieving Interoperable Standardshttp://www.etsi.org/WebSite/document/aboutETSI/CTI/Achieving%20Interoperable%20Standards%20-%20The%20ETSI%20Approach%20v1.pdf
Whitepaper on Achieving Technical Interoperabilityhttp://www.etsi.org/WebSite/document/whitepapers/WP3_IOP_final.pdf
Summary of ETSI IMS Interoperability Events http://www.etsi.org/WebSite/technologies/IMSTesting.aspx
13
World Class Standards
Thank you for your attention
Now, let’s get connected!
14