1 Workshops on Hardware-in-the-Loop Testing of Protection Relays using HYPERSIM (Part 1) Bouna Cisse, P.E., MSc.E. [email protected] Jean-Philippe Gagnon, eng. [email protected] Derek Brown [email protected]
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
Workshops on Hardware-in-the-Loop Testing of Protection Relays using HYPERSIM
(Part 1)
Bouna Cisse, P.E., [email protected]
Jean-Philippe Gagnon, [email protected]
Derek [email protected]
2
About GENTEC and the ALP Series Protection Relays
Testing Protection Relays using HYPERSIM
3
HIL Testing of ALP 4000 Relay with HYPERSIM : Testbench and Results
Testing Protection Relays using HYPERSIM
4
5
Power System Model
HIL Testing of ALP 4000 Relay with HYPERSIM
Ideal CT 1(breaker current)
Ideal CT 2(breaker current)
HYPERSIM Real-Time Simulator
West Side East Side
6
HIL WITH REAL TIME SIMULATOR
HIL Testing of ALP 4000 Relay with HYPERSIM
To reduce:
• Equipment damage
• Interruption of power
To improve:
• Power Quality
• Safety for all
7
Application : Standard HIL Testbench
HIL Testing of ALP 4000 Relay with HYPERSIM
www.omicron.at
HYPERSIM Real-Time Simulator
HYPERSIMPower System Model
ALP 4000 Relay Current Amplifier(s)(Bushing CT Emulator)
D/A16 Vpeak
6 phaseCT currents
0-25 AAC current
Breaker Trip signalsDigital24 Vdc
8
Application : Prototype testing without power modules
HIL Testing of ALP 4000 Relay with HYPERSIM
HYPERSIM Real-Time Simulator
HYPERSIMPower System Model
ALP 4000 Relay
D/A16 Vpeak
6 phaseCT currents
Breaker TripSignals
Digital24 Vdc
9
Transformer Differential Relay Settings
HIL Testing of ALP 4000 Relay with HYPERSIM
Restraint Current (p.u.)
Operation Current (p.u.)
NO TRIP
TRIP WITH RESTRAINT
TRIP WITH NO RESTRAINT Relay Settings:OPmax = 10 p.u.OPmin = 0.3 p.u.Rx = 1 p.u.P1 = 25 %P2 = 55 %
Inrush Blocking:Ih2 / Ih1 = 5%Ih5 / Ih1 = 5%
10
External Fault East Side – V, I and Breaker State
HIL Testing of ALP 4000 Relay with HYPERSIM
11
External Fault East Side – Differential and Ih2
HIL Testing of ALP 4000 Relay with HYPERSIM
12
FLUX
CURRENT
Primary CurrentSecondary Current
Actual Flux
Mag Current
Required Flux
ØSAT
0
010 20 30 40 50 60 70 80 M
13
Internal Fault East Side – V, I and Breaker State
HIL Testing of ALP 4000 Relay with HYPERSIM
14
Internal Fault East Side – Differential and Ih2
HIL Testing of ALP 4000 Relay with HYPERSIM
15
Inrush West Side – V, I and Breaker State
HIL Testing of ALP 4000 Relay with HYPERSIM
16
HIL Testing of ALP 4000 Relay with HYPERSIM
Inrush West Side – Differential and Ih2
17
Inrush West Side (no Blocking) – V, I and Breaker State
HIL Testing of ALP 4000 Relay with HYPERSIM
18
Inrush West Side (no Blocking) – Differential and Ih2
HIL Testing of ALP 4000 Relay with HYPERSIM
19
Questions ?
Thank you!
Testing Protection Relays using HYPERSIM
Related Documents
