1 WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2015) Technical Committee No. 1 “Quality assurance and social responsibility”, 10 standards No. Standard number English title 1. CEN/TS 16555-6:2014 Innovation management - Part 6: Creativity management 2. CEN/TS 16555-3:2014 Innovation management - Part 3: Innovation thinking 3. CEN/TS 16555-4:2014 Innovation management - Part 4: Intellectual property management 4. CEN/TS 16555-2:2014 Innovation management - Part 2: Strategic intelligence management 5. CEN/TS 16555-5:2014 Innovation management - Part 5: Collaboration management 6. ISO 18091:2014 Quality management systems - Guidelines for the application of ISO 9001:2008 in local government 7. ISO/TS 17582:2014 Quality management systems - Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government 8. ISO Guide 30:2015 Reference materials - Selected terms and definitions 9. ISO 10002:2014 Quality management - Customer satisfaction - Guidelines for complaints handling in organizations 10. ISO 3951-1:2013 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL Technical Committee No. 3 “Electrical and electronical materials”, 86 standards No. Standard number English title 1. EN 50160:2010/A1:2015 Voltage characteristics of electricity supplied by public electricity networks 2. EN 50216-4:2015 Power transformer and reactor fittings - Part 4: Basic accessories (earthling terminal, drain and filling devices, thermometer pocket, wheel assembly) 3. EN 50250:2002/A1:2015 Conversion adaptors for industrial use 4. EN 50290-4-1:2014 Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects 5. EN 50290-4-2:2014 Communication cables - Part 4-2: General considerations for the use of cables - Guide to use 6. EN 50341-2-19:2015 Overhead electrical lines exceeding AC 1 kV - Part 2-19: National Normative Aspects (NNA) for CZECH REPUBLIC (based on EN 50341-1:2012) 7. EN 50341-2-20:2015 Overhead electrical lines exceeding AC 1 kV - Part 2-20: National Normative Aspects (NNA) for ESTONIA (based on EN 50341-1:2012)
89
Embed
WORK PROGRAMME - DPS · 2015. 7. 14. · 69. IEC 60050-441:1984 International Electrotechnical Vocabulary. Switchgear, controlgear and fuses 70. IEC 60050-442:1998 International Electrotechnical
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
WORK PROGRAMMEof General Directorate of Standardization - ALBANIA
(Period 1 July to 31 December 2015)
Technical Committee No. 1“Quality assurance and social responsibility”, 10 standards
No. Standard number English title
1. CEN/TS 16555-6:2014 Innovation management - Part 6: Creativity management2. CEN/TS 16555-3:2014 Innovation management - Part 3: Innovation thinking3. CEN/TS 16555-4:2014 Innovation management - Part 4: Intellectual property management4. CEN/TS 16555-2:2014 Innovation management - Part 2: Strategic intelligence management5. CEN/TS 16555-5:2014 Innovation management - Part 5: Collaboration management6. ISO 18091:2014 Quality management systems - Guidelines for the application of ISO 9001:2008
in local government7. ISO/TS 17582:2014 Quality management systems - Particular requirements for the application of
ISO 9001:2008 for electoral organizations at all levels of government8. ISO Guide 30:2015 Reference materials - Selected terms and definitions9. ISO 10002:2014 Quality management - Customer satisfaction - Guidelines for complaints
handling in organizations10. ISO 3951-1:2013 Sampling procedures for inspection by variables - Part 1: Specification for
single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lotinspection for a single quality characteristic and a single AQL
Technical Committee No. 3“Electrical and electronical materials”, 86 standards
No. Standard number English title
1. EN 50160:2010/A1:2015 Voltage characteristics of electricity supplied by public electricity networks2. EN 50216-4:2015 Power transformer and reactor fittings - Part 4: Basic accessories (earthling
terminal, drain and filling devices, thermometer pocket, wheel assembly)3. EN 50250:2002/A1:2015 Conversion adaptors for industrial use4. EN 50290-4-1:2014 Communication cables - Part 4-1: General considerations for the use of cables -
Environmental conditions and safety aspects5. EN 50290-4-2:2014 Communication cables - Part 4-2: General considerations for the use of cables -
Guide to use6. EN 50341-2-19:2015 Overhead electrical lines exceeding AC 1 kV - Part 2-19: National Normative
Aspects (NNA) for CZECH REPUBLIC (based on EN 50341-1:2012)7. EN 50341-2-20:2015 Overhead electrical lines exceeding AC 1 kV - Part 2-20: National Normative
Aspects (NNA) for ESTONIA (based on EN 50341-1:2012)
2
8. EN 50377-17-2:2015 Connector sets and Interconnect components to be used in optical fibrecommunication systems - Product specifications - Part 17-2: Type FPFT (factorypolished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto reinforced cable containing IEC60793-2-50 category B1.3 or B6a1 or B6a 2 singlemode fibre (with restricted MFD),category C
9. EN 50393:2015 Test methods and requirements for accessories for use on distribution cables ofrated voltage 0,6/1,0 (1,2) kV
10. EN 50411-2-10:2015 Fibre organisers and closures to be used in optical fibre communication systems -Product specifications - Part 2-10: Sealed fibre splice closures type 2, category G,for FTTH optical distribution networks
11. CLC/TS 50549-1:2015 Requirements for generating plants to be connected in parallel with distributionnetworks - Part 1: Connection to a LV distribution network above 16 A
12. CLC/TS 50549-2:2015 Requirements for generating plants to be connected in parallel with distributionnetworks - Part 2: Connection to a MV distribution network
13. EN 50607:2015 Satellite signal distribution over a single coaxial cable - Second generation14. EN 50618:2014 Electric cables for photovoltaic systems15. EN 60071-5:2015 Insulation co-ordination - Part 5: Procedures for high-voltage direct current
(HVDC) converter stations16. EN 60086-4:2015 Primary batteries - Part 4: Safety of lithium batteries17. EN 60092-507:2015 Electrical installations in ships - Part 507 - Small vessels18. EN 60127-3:2015 Miniature fuses - Part 3: Sub-miniature fuse-links19. EN 60317-40:2015 Specifications for particular types of winding wires - Part 40: Glass-fibre braided
resin or varnish-impregnated, bare or enamelled rectangular copper wire,temperature index 200
20. EN 60598-1:2015 Luminaires - Part 1: General requirements and tests21. EN 60598-2-20:2015 Luminaires - Part 2-20: Particular requirements - Lighting chains22. EN 60598-2-21:2015 Luminaires - Part 2-21: Particular requirements - Rope lights23. EN 60598-2-
22:2014/AC:2015Luminaires - Part 2-22: Particular requirements - Luminaires for emergencylighting
24. EN 60630:1998/A7:2015 Maximum lamp outlines for incandescent lamps25. EN 60684-3-284:2014 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving
- Sheet 284: Heat-shrinkable sleevings, for oil barrier applications26. EN 60684-3-285:2014 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving
- Sheet 285: Heat-shrinkable polyolefin sleeving, for med. voltage joint insulation27. EN 60702-1:2002/A1:2015 Mineral insulated cables and their terminations with a rated voltage not exceeding
750 V - Part 1: Cables28. EN 60702-2:2002/A1:2015 Mineral insulated cables and their terminations with a rated voltage not exceeding
750 V - Part 2: Terminations29. EN 60793-1-50:2015 Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests30. EN 60794-3:2015 Optical fibre cables - Part 3: Sectional specification - Outdoor cables31. EN 60794-3-10:2015 Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct,
directly buried or lashed aerial optical telecommunication cables32. EN 60794-4-10:2014 Optical fibre cables - Part 4-10: Family specification - Optical ground wires
(OPGW) along electrical power lines33. EN 60809:2015 Lamps for road vehicles - Dimensional, electrical and luminous requirements
3
34. EN 60810:2015 Lamps for road vehicles - Performance requirements35. EN 60968:2015/AC:2015 Self-ballasted fluorescent lamps for general lighting services - Safety requirements36. EN 61169-50:2015 Radio-frequency connectors - Part 50: Sectional specification for RF coaxial
connectors with inner diameter of outer conductors 4,11 mm with quick locksystem - Characteristic impedance 50 Ohm (type QMA)
37. EN 61195:1999/A2:2015 Double-capped fluorescent lamps - Safety specifications38. EN 61199:2011/A2:2015 Single-capped fluorescent lamps - Safety specifications39. EN 61280-2-2:2012/AC:2015 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems -
Optical eye pattern, waveform and extinction ratio measurement40. EN 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters -
Distributed Raman amplifier gain and noise figure41. EN 61290-3-3:2014 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal
power to total ASE power ratio42. EN 61300-2-
50:2007/AC:2015Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 2-50: Tests - Fibre optic connector proof test withstatic load - Singlemode and multimode
43. EN 61300-2-51:2007/AC:2015
Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 2-51: Tests - Fibre optic connector test fortransmission with applied tensile load - Singlemode and multimode
44. EN 61300-3-53:2015 Fibre optic interconnecting devices and passive components - Basic test andmeasurement procedures - Part 3-53: Examinations and measurements - Encircledangular flux (EAF) measurement method based on two-dimensional far field datafrom step index multimode waveguide (including fibre)
45. EN 61753-031-3:2015 Fibre optic interconnecting devices and passive components - Performancestandard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wave-length-selective branching devices for Category U - Uncontrolled environment
46. EN 61755-2-4:2015 Fibre optic interconnecting devices and passive components - Connector opticalinterfaces - Part 2-4: Connection parameters of non-dispersion shifted single-modephysically contacting fibres - Non-angled for reference connection applications
47. EN 61755-2-5:2015 Fibre optic interconnecting devices and passive components - Connector opticalinterfaces - Part 2-5: Connection parameters of non-dispersion shifted single-modephysically contacting fibres - Angled for reference connection applications
48. EN 62026-3:2015 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) -Part 3: DeviceNet
49. EN 62031:2008/A2:2015 LED modules for general lighting - Safety specifications50. EN 62035:2014 Discharge lamps (excluding fluorescent lamps) - Safety specifications51. EN 62148-18:2015 Fibre optic active components and devices - Package and interface standards - Part
18: 40-Gbit/s serial transmitter and receiver components for use with the LCconnector interface
52. EN 62271-3:2015 High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC61850
53. EN 62275:2015 Cable management systems - Cable ties for electrical installations54. EN 62325-301:2014 Framework for energy market communications - Part 301: Common information
model (CIM) extensions for markets55. EN 62325-351:2013 Framework for energy market communications - Part 351: CIM European market
model exchange profile
4
56. EN 62325-451-1:2013 Framework for energy market communications - Part 451-1: Acknowledgementbusiness process and contextual model for CIM European market
57. EN 62325-451-2:2014 Framework for energy market communications - Part 451-2: Scheduling businessprocess and contextual model for CIM European market
58. EN 62325-451-3:2014 Framework for energy market communications - Part 451-3: Transmission capacityallocation business process (explicit or implicit auction) and contextual models forEuropean market
59. EN 62325-451-4:2015 Framework for energy market communications - Part 451-4: Settlement andreconciliation business process, contextual and assembly models for Europeanmarket
60. EN 62325-451-5:2015 Framework for energy market communications - Part 451-5: Problem statementand status request business processes, contextual and assembly models forEuropean market
61. EN 62343-5-1:2015 Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tiltsettling time measurement
62. EN 62386-101:2014 Digital addressable lighting interface - Part 101: General requirements - Systemcomponents
63. EN 62386-102:2014 Digital addressable lighting interface - Part 102: General requirements - Controlgear
64. EN 62386-103:2014 Digital addressable lighting interface - Part 103: General requirements - Controldevices
65. EN 62629-22-1:2013 3D display devices - Part 22-1: Measuring methods for autostereoscopic displays -Optical
66. EN 62747:2014/AC:2015 Terminology for voltage-sourced converters (VSC) for high-voltage direct current(HVDC) systems
67. EN 62776:2015 Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safetyspecifications
68. IEC 60050-441:1984/A1:2000 International Electrotechnical Vocabulary. Switchgear, controlgear and fuses69. IEC 60050-441:1984 International Electrotechnical Vocabulary. Switchgear, controlgear and fuses70. IEC 60050-442:1998 International Electrotechnical Vocabulary - Part 442: Electrical accessories71. IEC 60050-442:1998/A1:2015 International Electrotechnical Vocabulary - Part 442: Electrical accessories72. IEC 60050-444:2002 International Electrotechnical Vocabulary - Part 444: Elementary relays73. IEC 60050-461:2008 International Electrotechnical Vocabulary - Part 461: Electric cables74. IEC 60050-471:2007 International Electrotechnical Vocabulary - Part 471: Insulators75. IEC 60064:1993 Tungsten filament lamps for domestic and similar general lighting purposes -
Performance requirements76. IEC 60064:1993/A1:2000 Amendment 1 - Tungsten filament lamps for domestic and similar general lighting
purposes - Performance requirements77. IEC 60064:1993/A2:2002 Amendment 2 - Tungsten filament lamps for domestic and similar general lighting
purposes - Performance requirements78. IEC 60064:1993/A3:2005 Amendment 3 - Tungsten filament lamps for domestic and similar general lighting
purposes - Performance requirements79. IEC 60167:1964 Methods of test for the determination of the insulation resistance of solid
insulating materials80. IEC 60169-1:1987/A1:1996 Amendment 1 - Radio-frequency connectors. Part 1: General requirements and
measuring methods
5
81. IEC 60169-1:1987 Radio-frequency connectors. Part 1: General requirements and measuring methods82. IEC 60169-1-1:1987 Radio-frequency connectors - Part 1: General requirements and measuring
methods - Section One: Electrical tests and measuring procedures: Reflection factor83. IEC 60169-1-3:1988/ A1:1996 Amendment 1 - Radio-frequency connectors - Part 1: General requirements and
84. IEC 60169-1-3:1987 Radio-frequency connectors - Part 1: General requirements and measuringmethods - Section Three: Electrical tests and measuring procedures: Screeningeffectiveness
85. IEC/TR 60071-4:2004 Insulation co-ordination - Part 4: Computational guide to insulation co-ordinationand modelling of electrical networks
86. IEC/TS 60071-5:2014 Insulation co-ordination - Part 5: Procedures for high-voltage direct current(HVDC) converter stations
Technical Committee No. 4“Electrical and electronic devices”, 45 standards
No. Standard number English title
1. EN 62629-1-2:2013 3D Display devices - Part 1-2: Generic - Terminology and letter symbols2. EN 60127-1:2006/A2:2015 Miniature fuses - Part 1: Definitions for miniature fuses and general
requirements for miniature fuse-links3. EN 61439-5:2015/AC:2015 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for
power distribution in public networks4. EN 61169-48:2015 Radio-frequency connectors - Part 48: Sectional specification for series BMP R.F.
coaxial connectors5. EN 61439-5:2015 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for
power distribution in public networks6. EN 61811-1:2015 Electromechanical telecom elementary relays of assessed quality - Part 1:
Generic specification and blank detail specification7. EN 62271-104:2015 High-voltage switchgear and controlgear - Part 104: Alternating current
switches for rated voltages higher than 52 kV8. IEC 60050-448:1995 International Electrotechnical Vocabulary - Chapter 448: Power syst. protection9. IEC 60050-445:2010 International Electrotechnical Vocabulary - Part 445: Time relays10. IEC 60050-431:1980 International Electrotechnical Vocabulary. Transductors11. IEC 60050-421:1990 International Electrotechnical Vocabulary. Chapter 421: Power transformers
and reactors12. IEC 60050-415:1999 International Electrotechnical Vocabulary - Part 415: Wind turbine generator
systems13. IEC 60050-411:1996 International Electrotechnical Vocabulary - Chapter 411: Rotating machinery14. IEC 60050-411:1996/A1:2007 International Electrotechnical Vocabulary - Chapter 411: Rotating machinery15. IEC 60050-321:1986 International Electrotechnical Vocabulary. Chapter 321: Instrument transformer16. IEC 60092-350:2014 Electrical installations in ships - Part 350: General construction and test
methods of power, control and instrumentation cables for shipboard andoffshore applications
6
17. IEC 60092-307:1980 Electrical installations in ships. Part 307: Equip. - Heating & cooking appliances18. IEC 60092-305:1980 Electrical installations in ships - Part 305: Equipment - Accumulator batteries19. IEC 60092-306:2009 Electrical installations in ships - Part 306: Equipment - Luminaires and lighting
accessories20. IEC 60092-305:1980/A1:1989 Amendment 1 - Electrical installations in ships. Part 305: Equipment -
Accumulator (storage) batteries21. IEC 60092-304:1980 Electrical installations in ships - Part 304: Equipment - Semiconductor convertor22. IEC 60092-304:1980/A1:1995 Amendment 1 - Electrical installations in ships. Part 304: Equipment -
Semiconductor convertors23. IEC 60092-303:1980 Electrical installations in ships - Part 303: Equipment - Transformers for power
and lighting24. IEC 60092-303:1980/A1:1997 Amendment 1 - Electrical installations in ships. Part 303: Equipment -
Transformers for power and lighting25. IEC 60092-301:1980 Electrical installations in ships - Part 301: Equipment - Generators and motors26. IEC 60092-302:1997 Electrical installations in ships - Part 302: Low-voltage switchgear and
controlgear assemblies27. IEC 60092-301:1980/A1:1994 Amendment 1 - Electrical installations in ships. Part 301: Equipment -
Generators and motors28. IEC 60092-301:1980/A2:1995 Amendment 2 - Electrical installations in ships. Part 301: Equipment -
Generators and motors29. IEC 60092-202:1994 Electrical installations in ships - Part 202: System design - Protection30. IEC 60092-202:1994/A1:1996 Amnd. 1 - Electrical installations in ships - Part 202: System design - Protection31. IEC 60092-201:1994 Electrical installations in ships - Part 201: System design - General32. IEC 60092-101:1995 Electrical installations in ships - Part 101: Definitions and general requirements33. IEC 60076-10-1:2005 Power transformers - Part 10-1: Determ. of sound levels - Application guide34. IEC 60076-8:1997 Power transformers - Part 8: Application guide35. IEC 60072-3:1994 Dimensions and output series for rotating electrical machines - Part 3: Small
built-in motors - Flange numbers BF10 to BF5036. IEC 60076-7:2005 Power transformers - Part 7: Loading guide for oil-immersed power transform.37. IEC 60072-2:1990 Dimensions and output series for rotating electrical machines - Part 2: Frame
numbers 355 to 1000 and flange numbers 1180 to 236038. IEC 60072-1:1991 Dimensions and output series for rotating electrical machines - Part 1: Frame
numbers 56 to 400 and flange numbers 55 to 108039. IEC 60136:1986 Dimensions of brushes and brush-holders for electrical machinery40. IEC 60136:1986/A1: 1995 Dimensions of brushes and brush-holders for electrical machinery41. IEC 61892-3:2012 Mobile and fixed offshore units - Electrical installations - Part 3: Equipment42. IEC 60092-360:2014 Electrical installations in ships - Part 360: Insulating and sheathing materials for
shipboard and offshore units, power, control, instrumentation andtelecommunication cables
43. IEC/TR 60092-370:2009 Electrical installations in ships - Part 370: Guidance on the selection of cables fortelecommunication and data transfer including radio-frequency cables
44. IEC 60092-376:2003 Electrical installations in ships - Part 376: Cables for control andinstrumentation circuits 150/250 V (300 V)
45. IEC 61378-3:2015 Converter transformers - Part 3: Application guide
7
Technical Committee No. 6“Technical safety and environment” 95 standards
No. Standard number English title
1. CEN/CLC/TR 14060:2014 Medical device traceability enabled by unique device identification (UDI)2. CEN/CLC/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for
preventing electrostatic risks in hazardous areas (explosion risks)3. EN 45544-1:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and
direct concentration measurement of toxic gases and vapours - Part 1: Generalrequirements and test methods
4. CLC/TR 60079-32-1:2015 Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance5. CLC/TR 60079-33:2015 Explosive atmospheres - Part 33: Equipment protection by special protection 's'6. CLC/TS 50594:2015 Tumble dryers for commercial use - Methods for measuring the performance7. CLC/TS 50625-3-1:2015 Collection, logistics & treatment requirements for WEEE - Part 3-1: Specification
for de-pollution - General8. CLC/TS 50640:2015 Clothes washing machines for commercial use - Methods for measuring the
performance9. EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and
measurement of combustible gases, toxic gases or oxygen10. EN 50342-2:2007/A1:2014 Lead-acid starter batteries - Part 2: Dimensions of batteries & mark of terminals11. EN 50436-2:2014/A1:2015 Alcohol interlocks - Test methods and performance requirements - Part 2:
Instruments having a mouthpiece and measuring breath alcohol for generalpreventive use
12. EN 50436-6:2015 Alcohol interlocks - Test methods and performance requirements - Part 6: Datasecurity
13. EN 50465:2015 Gas appliances - Combined heat and power appliance of nominal heat inputinferior or equal to 70 kW
14. EN 50548:2011/A2:2014 Junction boxes for photovoltaic modules15. EN 50574-1:2012/AC:2014 Collection, logistics & treatment requirements for end-of-life household
appliances containing volatile fluorocarbons or volatile hydrocarbons16. EN 50598-1:2014 Ecodesign for power drive systems, motor starters, power electronics & their
driven applications - Part 1: General requirements for setting energy efficiencystandards for power driven equipment using the extended product approach(EPA), and semi analytic model (SAM)
17. EN 50598-2:2014 Ecodesign for power drive systems, motor starters, power electronics & theirdriven applications - Part 2: Energy efficiency indicators for power drivesystems and motor starters
18. EN 50598-3:2015 Ecodesign for power drive systems, motor starters, power electronics and theirdriven applications - Part 3: Quantitative eco design approach through life cycleassessment including product category rules and the content of environmentaldeclarations
19. EN 50615:2015 Household and similar electrical appliances - Safety - Particular requirementsfor devices for fire prevention and suppression for electric hobs (cooktops)
20. EN 50625-2-1:2014 Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatmentrequirements for lamps
8
21. EN 50636-2-107:2015 Safety of household and similar appliances - Part 2-107: Particular requirementsfor robotic battery powered electrical lawnmowers
22. EN 60079-10-2:2015 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dustatmospheres
23. EN 60079-18:2015 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"24. EN 60079-2:2014 Explosive atmospheres - Part 2: Equipm. protection pressurized enclosure "p"25. EN 60079-32-2:2015 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests26. EN 60079-5:2015 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"27. EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level
(EPL) Ga28. EN 60320-3:2014 Appliance couplers for household and similar general purposes - Part 3:
Standard sheets and gauges29. EN 60335-2-103:2015 Household and similar electrical appliances - Safety - Part 2-103: Particular
requirements for drives for gates, doors and windows30. EN 60335-2-11:2010/A1:2015 Household and similar electrical appliances - Safety - Part 2-11: Particular
requirements for tumble dryers31. EN 60335-2-15:2002/AC:2005 Household and similar electrical appliances - Safety - Part 2-15: Particular
requirements for appliances for heating liquids32. EN 60335-2-23:2003/A2:2015 Household and similar electrical appliances - Safety - Part 2-23: Particular
requirements for appliances for skin or hair care33. EN 60335-2-31:2014 Household and similar electrical appliances - Safety - Part 2-31: Particular
requirements for range hoods and other cooking fume extractors34. EN 60335-2-32:2003/A2:2015 Household and similar electrical appliances - Safety - Part 2-32: Particular
requirements for massage appliances35. EN 60335-2-4:2010/A1:2015 Household and similar electrical appliances - Safety - Part 2-4: Particular
requirements for spin extractors36. EN 60335-2-5:2015 Household and similar electrical appliances - Safety - Part 2-5: Particular
requirements for dishwashers37. EN 60335-2-
54:2008/A11:2012/AC:2015Household and similar electrical appliances - Safety - Part 2-54: Particularrequirements for surface-cleaning appliances for household use employingliquids or steam
38. EN 60335-2-6:2015 Household and similar electrical appliances - Safety - Part 2-6: Particularrequirements for stationary cooking ranges, hobs, ovens and similar appliances
39. EN 60335-2-76:2005/A2:2015 Household and similar electrical appliances - Safety - Part 2-76: Particularrequirements for electric fence energizers
40. EN 60335-2-95:2015 Household and similar electrical appliances - Safety - Part 2-95: Particularrequirements for drives for vertically moving garage doors for residential use
41. EN 60335-2-97:2006/A12:2015 Household and similar electrical appliances - Safety - Part 2-97: Particularrequirements for drives for rolling shutters, awnings, blinds and similarequipment
42. EN 60704-2-1:2015 Household and similar electrical appliances - Test code for the determination ofairborne acoustical noise - Part 2-1: Particular requirements for vacuumcleaners
43. EN 60704-2-14:2013/A11:2015 Household and similar electrical appliances - Test code for the determination ofairborne acoustical noise - Part 2-14: Particular requirements for refrigerators,frozen-food storage cabinets and food freezers
9
44. EN 60704-2-5:2005/A1:2015 Household and similar electrical appliances - Test code for the determination ofairborne acoustical noise - Part 2-5: Particular requirements for electric thermalstorage room heaters
45. EN 60705:2015 Household microwave ovens - Methods for measuring performance46. EN 60730-2-5:2015 Automatic electrical controls - Part 2-5: Particular requirements for automatic
electrical burner control systems47. EN 60745-2-3:2011/A12:2014 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular
requirements for grinders, polishers and disk-type sanders48. EN 60839-11-1:2013/AC:2015 Alarm and electronic security systems - Part 11-1: Electronic access control
systems - System and components requirements49. EN 60839-11-2:2015 Alarm and electronic security systems - Part 11-2: Electronic access control
systems - Application guidelines50. EN 60904-2:2015 Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices51. EN 61029-2-5:2011/A11:2015 Safety of transportable motor-operated electric tools - Part 2-5: Particular
requirements for band saws52. EN 61243-3:2014/AC:2015 Live working - Voltage detectors - Part 3: Two-pole low-voltage type53. EN 61481-1:2014 Live working - Phase comparators - Part 1: Capacitive type to be used for
voltages exceeding 1 kV a.c.54. EN 61481-2:2014 Live working - Phase comparators - Part 2: Resistive type to be used for
voltages from 1 kV to 36 kV a.c.55. EN 61482-1-2:2014 Live working - Protective clothing against the thermal hazards of an electric arc
- Part 1-2: Test methods - Method 2: Determination of arc protection class ofmaterial and clothing by using a constrained and directed arc (box test)
56. EN 61496-1:2013/AC:2015 Safety of machinery - Electro-sensitive protective equipment - Part 1: Generalrequirements and tests
57. EN 61591:1997/A12:2015 Household range hoods and other cooking fume extractors - Methods formeasuring performance
58. EN 62115:2005/A12:2015 Electric toys - Safety59. EN 62366-1:2015 Medical devices - Part 1: Application of usability engineering to med. devices60. EN 62368-1:2014/AC:2015 Audio/video, information and communication technology equipment - Part 1:
Safety requirements61. EN 62522:2014 Calibration of tuneable laser sources62. EN 62620:2015 Secondary cells and batteries containing alkaline or other non-acid electrolytes -
Secondary lithium cells and batteries for use in industrial applications63. EN 62656-1:2015 Standardized product ontology register and transfer by spreadsheets - Part 1:
Logical structure for data parcels64. EN 62676-1-2:2014/AC:2015 Video surveillance systems for use in security applications - Part 1-2: System
requirements – Performance requirements for video transmission65. EN 62676-3:2015 Video surveillance systems for use in security applications - Part 3: Analog and
digital video interfaces66. EN 62676-4:2015 Video surveillance systems for use in security applications - Part 4: Application
guidelines67. EN 62740:2015 Root cause analysis (RCA)68. EN 62741:2015 Demonstration of dependability requirements - The dependability case69. EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests70. EN 62817:2015 Photovoltaic systems - Design qualification of solar trackers
10
71. EN 62841-2-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn andgarden machinery - Safety - Part 2-9: Particular requirements for hand-heldtappers and threaders
72. EN 62852:2015 Connectors for DC-application in photovoltaic systems - Safety require. & tests73. EN 62885-3:2015 Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods
for measuring the performance74. EN 80601-2-35:2009/AC:2015 Medical electrical equipment - Part 2-35: Particular requirements for the basic
safety and essential performance of heating devices using blankets, pads andmattresses and intended for heating in medical use
75. EN ISO/IEC 80369-20:2015 Small-bore connectors for liquids and gases in healthcare applications - Part 20:Common test methods (ISO 80369-20:2015)
76. HD 60364-4-42:2011/A1:2015 Low voltage electrical installations - Part 4-42: Protection for safety - Protectionagainst thermal effects
77. HD 60364-8-1:2015 Low-voltage electrical installations - Part 8-1: Energy efficiency78. HD 62640:2015 Residual current devices with or without overcurrent protection for socket-outlets
for household and similar uses79. IEC 60050-351:2013 International Electrotechnical Vocabulary - Part 351: Control technology80. IEC 60050-426:2008 International Electrotechnical Vocabulary - Part 426: Equipment for explosive
atmospheres81. IEC 60050-426:2008/A1:2015 Amendment 1 - International Electrotechnical Vocabulary - Part 426: Equipment for
explosive atmospheres82. IEC 60050-482:2004 International Electrotechnical Vocabulary - Part 482: Primary and secondary cells
and batteries83. IEC 60050-114:2014 International Electrotechnical Vocabulary - Part 114: Electrochemistry84. IEC 60079-28:2015 Explosive atmospheres - Part 28: Protection of equipment and transmission
systems using optical radiation85. IEC 60079-29-2:2015 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use
and maintenance of detectors for flammable gases and oxygen86. IEC 60079-32-2:2015 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests87. IEC 60079-5:2015 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"88. IEC 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"89. IEC 60335-2-58:2002/A2:2015 Amendment 2 - Household and similar electrical appliances - Safety - Part 2-58:
Particular requirements for commercial electric dishwashing machines90. IEC 60335-2-65:2002/A2:2015 Amendment 2 - Household and similar electrical appliances - Safety - Part 2-65:
Particular requirements for air-cleaning appliances91. IEC 60335-2-80:2015 Household and similar electrical appliances - Safety - Part 2-80: Particular
requirements for fans92. IEC 60335-2-81:2015 Household and similar electrical appliances - Safety - Part 2-81: Particular
requirements for foot warmers and heating mats93. IEC/TS 60079-40:2015 Explosive atmospheres - Part 40: Requirements for process sealing between
flammable process fluids and electrical systems94. IEC/TS 61496-4-3:2015 Safety of machinery - Electro-sensitive protective equipment - Part 4-3:
Particular requirements for equipment using vision based protective devices(VBPD) - Additional requirements when using stereo vision techniques
95. IEC 62321-6:2015 Determination of certain substances in electrotechnical products - Part 6:Polybrominated biphenyls and polybrominated diphenyl ethers in polymers bygas chromatograhy -mass spectometry (GC-MS)
11
Technical Committee No. 7“Semiconductor materials and devices. Electromechanical
components and mechanical structures for electronic equipment”,73 standards
No. Standard number English title
1. EN 140402:2015 Blank Detail Specification: Fixed low power wirewound surface mount (SMD)resistors
2. EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD)resistors - Rectangular - Stability classes 0,5; 1; 2
3. EN 50121-1:2015 Railway applications - Electromagnetic compatibility - Part 1: General4. EN 50121-2:2015 Railway applications - Electromagnetic compatibility - Part 2: Emission of the
whole railway system to the outside world5. EN 50121-3-1:2015 Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock -
Train and complete vehicle6. EN 50121-3-2:2015 Railway applic. - Electromagnetic comp. - Part 3-2: Rolling stock - Apparatus7. EN 50121-4:2015 Railway applications - Electromagnetic compatibility - Part 4: Emission and
immunity of the signalling and telecommunications apparatus8. EN 50121-5:2015 Railway applications - Electromagnetic compatibility - Part 5: Emission and
immunity of fixed power supply installations and apparatus9. EN 50123-6:2003/A1:2014 Railway applications - Fixed installations - D.C. switchgear - Part 6: D.C.
switchgear assemblies10. EN 50290-4-1:2014 Communication cables - Part 4-1: General considerations for the use of cables -
Environmental conditions and safety aspects11. EN 50290-4-2:2014 Communication cables - Part 4-2: General considerations for the use of cables -
Guide to use12. EN 50500:2008/A1:2015 Measurement procedures of magnetic field levels generated by electronic and
electrical apparat. in the railway environment with respect to human exposure13. EN 50617-1:2015 Railway applications - Technical parameters of train detection systems for the
interoperability of the trans-European railway system - Part 1: Track circuits14. EN 50617-2:2015 Railway Applications - Technical parameters of train detection systems for the
interoperability of the trans-European railway system - Part 2: Axle counters15. EN 60115-2:2015 Fixed resistors for use in electronic equipment - Part 2: Sectional specification:
Leaded fixed low power film resistors16. EN 50618:2014 Electric cables for photovoltaic systems17. EN 60118-4:2015 Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid
purposes - System performance requirements18. EN 60318-3:2015 Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler
for the calibration of supra-aural earphones used in audiometry19. EN 60297-3-108:2015 Mechanical structures for electronic equipment - Dimensions of mechanical
structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-typesubracks and plug-in units
20. EN 60645-1:2015 Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-toneaudiometry
12
21. EN 60747-5-5:2011/A1:2015 Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices -Photocouplers
22. EN 60940:2015 Guidance information on the application of capacitors, resistors, inductors andcomplete filter units for electromagnetic interference suppression
23. EN 61082-1:2015 Preparation of documents used in electrotechnology - Part 1: Rules24. EN 61375-2-5:2015 Electronic railway equipment - Train communication network (TCN) - Part 2-5:
Ethernet train backbone25. EN 61340-4-4:2012/A1:2015 Electrostatics - Part 4-4: Standard test methods for specific applications -
Electrostatic classification of flexible intermediate bulk containers (FIBC)26. EN 61340-4-8:2015 Electrostatics - Part 4-8: Standard test methods for specific applications -
Electrostatic discharge shielding - Bags27. EN 61810-1:2015 Electromechanical elementary relays - Part 1: General and safety requirements28. EN 61810-3:2015 Electromechanical elementary relays - Part 3: Relays with forcibly guided
(mechanically linked) contacts29. EN 61837-4:2015 Surface mounted piezoelectric devices for frequency control and selection -
Standard outlines and terminal lead connections - Part 4: Hybrid enclosureoutlines
30. EN 62135-2:2015 Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC)requirements
31. EN 62489-1:2010/A1:2015 Electroacoustics - Audio-frequency induction loop systems for assisted hearing- Part 1: Methods of measuring and specifying the perform. of system compon.
32. EN 62656-3:2015 Standardized product ontology register and transfer by spreadsheets - Part 3:Interface for Common Information Model
33. EN 62744:2015 Representation of states of objects by graphical symbols34. EN 62813:2015 Lithium ion capacitors for use in electric and electronic equipment - Test
methods for electrical characteristics35. IEC 60063:2015 Preferred number series for resistors and capacitors36. IEC 60115-2:2014 Fixed resistors for use in electronic equipment - Part 2: Sectional specification:
Leaded fixed low power film resistors37. IEC 60384-19:2015 Fixed capacitors for use in electronic equipment - Part 19: Sectional
specification: Fixed metallized polyethylene-terephthalate film dielectricsurface mount d.c. capacitors
38. IEC 60384-9:2015 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification:Fixed capacitors of ceramic dielectric, Class 2
39. IEC 60940:2015 Guidance information on the application of capacitors, resistors, inductors andcomplete filter units for electromagnetic interference suppression
40. IEC 62813:2015 Lithium ion capacitors for use in electric and electronic equipment - Testmethods for electrical characteristics
41. IEC 60050-101:1998 International Electrotechnical Vocabulary - Part 101: Mathematics42. IEC 60050-103:2009 International Electrotechnical Vocabulary - Part 103: Mathematics – Functions43. IEC 60050-113:2011 International Electrotechnical Vocabulary - Part 113: Physics for
electrotechnology44. IEC 60050-113:2011/AMD1:2014 Amendment 1 - International Electrotechnical Vocabulary - Part 113: Physics for
electrotechnology45. IEC 60050-121:1998 International Electrotechnical Vocabulary - Part 121: Electromagnetism46. IEC 60050-121:1998/A1:2002 Amendment 1 - Internat. Electrotech. Vocabulary - Part 121: Electromagnetism
13
47. IEC 60050-121:1998/A2:2008 Amendment 2 - International Electrotechnical Vocabulary - Part 121:Electromagnetism
48. IEC 60050-131:2002 International Electrotechnical Vocabulary - Part 131: Circuit theory49. IEC 60050-131:2002/A1:2008 Amendment 1 - International Electrotechnical Vocabulary - Part 131: Circuit
theory50. IEC 60050-131:2002/A2:2013 Amendment 2 - International Electrotechnical Vocabulary - Part 131: Circuit
theory51. IEC 60050-141:2004 International Electrotechnical Vocabulary - Part 141: Polyphase systems and
circuits52. IEC 60050-151:2001 International Electrotechnical Vocabulary - Part 151: Electrical and magnetic
devices53. IEC 60050-151:2001/A1:2013 Amendment 1 - International Electrotechnical Vocabulary - Part 151: Electrical
and magnetic devices54. IEC 60050-151:2001/A2:2014 Amendment 2 - International Electrotechnical Vocabulary - Part 151: Electrical
and magnetic devices55. IEC 60050-161:1990/A2:1998 Amendment 2 - International Electrotechnical Vocabulary. Chapter 161:
Electromagnetic compatibility56. IEC 60050-161:1990/A3:2014 Amendment 3 - International Electrotechnical Vocabulary - Part 161:
Electromagnetic compatibility57. IEC 60050-161:1990/A4:2014 Amendment 4 - International Electrotechnical Vocabulary - Part 161:
Magnetic materials and components65. IEC 60050-221:1990/A2:1999 Amendment 2 - International Electrotechnical Vocabulary. Chapter 221:
Magnetic materials and components66. IEC 60050-221:1990/A3:2007 Amendment 3 - International Electrotechnical Vocabulary - Part 221: Magnetic
materials and components67. IEC 60050-436:1990 International Electrotechnical Vocabulary. Chapter 436: Power capacitors68. IEC 60050-521:2002 International Electrotechnical Vocabulary - Part 521: Semiconductor devices
and integrated circuits69. IEC 60050-531:1974 International Electrotechnical Vocabulary. Electronic tubes70. IEC 60050-581:2008 International Electrotechnical Vocabulary - Part 581: Electromechanical
components for electronic equipment71. IEC 60050-811:1991 International Electrotechnical Vocabulary - Chapter 811: Electric traction
14
72. IEC 60050-821:1998 International Electrotechnical Vocabulary - Part 821: Signalling and securityapparatus for railways
73. IEC 60135:1961 Numbering of electrodes and designation of units in electronic tubes and valves
1. CLC/TS 50568-4:2015 Electricity metering data exchange - Part 4: Lower layer PLC profile usingSMITP B-PSK modulation
2. CLC/TS 50568-8:2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 8: SMITP B-PSK PLC communication profile for neighbourhood networks - Including: TheOriginal-SMITP PLC B-PSK communication profile, The Original-SMITP Localdata exchange profile and The Original-SMITP IP communication profile
3. CLC/TS 50590:2015 Electricity metering data exchange - Lower layer PLC profile using AdaptiveMulti Carrier Spread-Spectrum (AMC-SS) modulation
4. CLC/TS 52056-8-4:2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-4:Narrow-band OFDM PRIME PLC communication profile for neighbourhoodnetworks
5. CLC/TS 52056-8-5:2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5:Narrow-band OFDM G3-PLC comm.. profile for neighbourhood networks
6. CLC/TS 52056-8-7:2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-7: AMC-SS PLC communication profile for neighbourhood networks
7. EN 45501:2015 Metrological aspects of non-automatic weighing instruments8. EN 50561-1:2013/AC:2014 Power line communication apparatus used in low-voltage installations - Radio
disturbance characteristics - Limits and methods of measurement - Part 1:Apparatus for in-home use
9. EN 55014-2:2015 Electromagnetic compatibility - Requirements for household appliances,electric tools and similar apparatus - Part 2: Immunity - Prod. family standard
10. EN 60645-1:2015 Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-toneaudiometry
11. EN 60721-2-1:2014 Classification of environmental conditions - Part 2-1: Environmental conditionsappearing in nature - Temperature and Humidity
12. EN 60721-2-3:2014 Classification of environmental conditions - Part 2-3: Environmental conditionsappearing in nature - Air pressure
13. EN 60721-2-9:2014 Classification of environmental conditions - Part 2-9: Environmental conditionsappearing in nature - Measured shock and vibration data - Storage,transportation and in-use
14. EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control andlaboratory use - Part 2-051: Particular requirements for laboratory equipmentfor mixing and stirring
15. EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control andlaboratory use - Part 2-061: Particular requirements for laboratory atomicspectrometers with thermal atomization and ionization
15
16. EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control andlaboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
17. EN 61158-1:2014 Industrial communication networks - Fieldbus specifications - Part 1: Overviewand guidance for the IEC 61158 and IEC 61784 series
18. EN 61158-2:2014 Industrial communication networks - Fieldbus specifications - Part 2: Physicallayer specification and service definition
19. EN 61158-3-1:2014 Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements
20. EN 61158-4-1:2014 Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements
21. EN 61158-5-2:2014 Industrial communication networks - Fieldbus specifications - Part 5-2:Application layer service definition - Type 2 elements
22. EN 61158-6-2:2014 Industrial communication networks - Fieldbus specifications - Part 6-2:Application layer protocol specification - Type 2 elements
23. EN 61207-7:2013 Expression of performance of gas analyzers - Part 7: Tuneable semiconductorlaser gas analyzers
24. EN 61557-8:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500V d.c. - Equipment for testing, measuring or monitoring of protective measures- Part 8: Insulation monitoring devices for IT systems
25. EN 61557-9:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500V d.c. - Equipment for testing, measuring or monitoring of protective measures- Part 9: Equipment for insulation fault location in IT systems
26. EN 61784-1:2014 Industrial communication networks - Profiles - Part 1: Fieldbus profiles27. EN 61784-2:2014 Industrial communication networks - Profiles - Part 2: Additional fieldbus
profiles for real-time networks based on ISO/IEC 8802-328. EN 61788-18:2013 Superconductivity - Part 18: Mechanical properties measurement - Room
temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212composite superconductors
29. EN 61788-19:2014 Superconductivity - Part 19: Mechanical properties measurement - Roomtemperature tensile test of reacted Nb3Sn composite superconductors
30. EN 62053-24:2015 Electricity metering equipment (a.c.) - Particular requirements - Part 24: Staticmeters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)
31. EN 62734:2015 Industrial networks - Wireless communication network and communicationprofiles - ISA 100.11a
Technical Committee No. 9“Information and communication technology”, 30 standards
No. Standard number English title
1. CLC/TR 50174-99-1:2015 Information technology - Cabling installation - Part 99-1: Remote powering2. EN 16601-10:2015 Space project management - Project planning and implementation3. EN 16601-10-01:2014 Space project management - Part 10-01: Organization and conduct of reviews4. EN 16601-40:2014 Space project management - Configuration and information management
16
5. EN 16601-60:2014 Space project management - Cost and schedule management6. EN 16601-80:2014 Space project management - Part 80: Risk management7. EN 16603-10-03:2014 Space engineering - Testing8. EN 16603-10-04:2015 Space engineering - Space environment9. EN 16603-10-06:2014 Space engineering - Part 10-06: Technical requirements specification10. EN 16603-10-09:2014 Space engineering - Reference coordinate system11. EN 16603-10-11:2014 Space engineering - Human factors engineering12. EN 16603-10-12:2014 Space engineering - Method for the calculation of radiation received and its
effects, and a policy for design margins13. EN 16603-20-06:2014 Space engineering - Spacecraft charging14. EN 16603-20-07:2014 Space engineering - Electromagnetic compatibility15. EN 16603-20-08:2014 Space engineering - Part 20-08: Photovoltaic assemblies and components16. EN 16603-32-01:2014 Space engineering - Fracture control17. EN 16603-32-02:2014 Space engineering - Structural design and verification of pressurized hardware18. EN 16603-32-03:2014 Space engineering - Structural finite element models19. EN 16603-32-10:2014 Space engineering - Structural factors of safety for spaceflight hardware20. EN 16603-32-11:2014 Space engineering - Modal survey assessment21. EN 16603-34:2014 Space engineering - Part 34: Environmental control and life support (ECLS)22. EN 16603-35:2014 Space engineering - Propulsion general requirements23. EN 16603-35-01:2014 Space engineering - Liquid and electric propulsion for spacecraft24. EN 50491-2:2010/A1:2015 General requirements for Home and Building Electronic Systems (HBES) and
Building Automation and Control Systems (BACS) - Part 2: Environmentalconditions
25. EN 50600-2-4:2015 Information technology - Data centre facilities and infrastructures - Part 2-4:Telecommunications cabling infrastructure
26. EN 55016-1-6:2015 Specification for radio disturbance and immunity measuring apparatus andmethods - Part 1-6: Radio disturbance and immunity measuring apparatus -EMC antenna calibration
27. EN 60065:2014 Audio, video and similar electronic apparatus - Safety requirements28. EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers29. EN 61285:2015 Industrial-process control - Safety of analyzer houses30. EN 62351-3:2014 Power systems management and associated information exchange - Data and
communications security - Part 3: Communication network and system security- Profiles including TCP/IP
Technical Committee No. 10“Digital and analogue telecommunication systems”, 400 standards
No. Standard number English title
1. EN 300 328 V1.9.1:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); Widebandtransmission systems; Data transmission equipment operating in the 2,4 GHzISM band and using wide band modulation techniques; Harmonized ENcovering the essential requirements of article 3.2 of the R&TTE Directive
17
2. EN 301 001-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 1: Protocol specification
3. EN 301 001-2 V1.2.2:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 2: Protocol Implementation Conformance Statement (PICS)proforma specification
4. EN 301 001-3 V1.1.3:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specificationfor the user
5. EN 301 001-3 V2.0.0:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specificationfor the user
6. EN 301 001-4 V1.1.4:1999 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol ImplementationeXtra Information for Testing (PIXIT) proforma specification for the user
7. EN 301 001-4 V2.0.0:1999 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 4: Abstract Test Suite (ATS) and partial Protocol ImplementationeXtra Information for Testing (PIXIT) proforma specification for the user
8. EN 301 001-5 V1.1.3:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specificationfor the network
9. EN 301 001-5 V2.0.0:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specificationfor the network
10. EN 301 001-6 V1.1.4:1999 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol ImplementationeXtra Information for Testing (PIXIT) proforma specification for the network
11. EN 301 001-6 V2.0.0:1999 Integrated Services Digital Network (ISDN); Outgoing Call Barring (OCB)supplementary services; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol ImplementationeXtra Information for Testing (PIXIT) proforma specification for the network
12. EN 301 002-1 V1.2.4:1998 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Dig. Subscriber Sign. Syst.No. one (DSS1) protocol; Part 1: Protocol specification
13. EN 301 002-1 V1.3.1:2001 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocolspecification
14. EN 301 002-2 V1.2.4:1998 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification
18
15. EN 301 002-2 V1.3.1:2001 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification
16. EN 301 002-3 V1.1.4:2000 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test SuiteStructure and Test Purposes (TSS&TP) specification for the user
17. EN 301 002-3 V1.2.1:2001 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test SuiteStructure and Test Purposes (TSS&TP) specification for the user
18. EN 301 002-3 V2.0.0:1999 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test SuiteStructure and Test Purposes (TSS&TP) specification for the user
19. EN 301 002-4 V1.1.3:2000 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: AbstractTest Suite (ATS) and partial Protocol Implementation eXtra Information forTesting (PIXIT) proforma specification for the user
20. EN 301 002-4 V1.2.1:2001 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4: AbstractTest Suite (ATS) and partial Protocol Implementation eXtra Information forTesting (PIXIT) proforma specification for the user
21. EN 301 002-5 V1.1.4:2000 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test SuiteStructure and Test Purposes (TSS&TP) specification for the network
22. EN 301 002-5 V1.2.1:2001 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test SuiteStructure and Test Purposes (TSS&TP) specification for the network
23. EN 301 002-5 V2.0.0:1999 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test SuiteStructure and Test Purposes (TSS&TP) specification for the network
24. EN 301 002-6 V1.1.3:2000 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract TestSuite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the network
25. EN 301 002-6 V1.2.1:2001 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract TestSuite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the network
26. EN 301 002-6 V2.0.0:1999 Integrated Services Digital Network (ISDN); Security tools (SET) procedures;Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract TestSuite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the network
27. EN 301 003-1 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peak cellrate modification by the connection owner; Part 1: Protocol specification
28. EN 301 003-2 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peak cellrate modification by the connection owner; Part 2: Protocol ImplementationConformance Statement (PICS) proforma specification
19
29. EN 301 003-3 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 3: Test Suite Structure andTest Purposes (TSS&TP) specification for the user
30. EN 301 003-3 V1.2.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 3: Test Suite Structure andTest Purposes (TSS&TP) specification for the user
31. EN 301 003-4 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 4: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the user
32. EN 301 003-4 V1.2.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 4: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the user
33. EN 301 003-5 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 5: Test Suite Structure andTest Purposes (TSS&TP) specification for the network
34. EN 301 003-5 V1.2.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 5: Test Suite Structure andTest Purposes (TSS&TP) specification for the network
35. EN 301 003-6 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 6: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network
36. EN 301 003-6 V1.2.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Peakcell rate modification by the connection owner; Part 6: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network
37. EN 301 004-1 V1.1.3:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; Message Transfer Part (MTP) level 3 functions and messages to supportinternational interconnection; Part 1: Protocol specification
38. EN 301 004-2 V1.1.2:2000 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; Message Transfer Part (MTP) level 3 functions and messages to supportinternational interconnection; Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification
39. EN 301 005-1 V1.1.4:1998 V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 referencepoint for the support of broadband or combined narrowband and broadbandAccess Networks (ANs); Part 1: Interface specification
40. EN 301 005-2 V1.1.5:1998 V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 reference
20
point for the support of broadband or combined narrowband and broadbandAccess Networks (ANs); Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification
41. EN 301 005-3 V1.1.2:2000 V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 referencepoint for the support of broadband or combined narrowband and broadbandAccess Networks (ANs); Part 3: Test Suite Structure and Test Purposes(TSS&TP) specification
42. EN 301 005-4 V1.1.2:2000 V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 referencepoint for the support of broadband or combined narrowband and broadbandAccess Networks (ANs); Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specification
43. EN 301 006-1 V1.2.2:1998 Q3 interface at the Local Exchange (LE) for line and circuit testing of analogueand Integrated Services Digital network (ISDN) subscriber lines; Part 1: Q3interface specification
44. EN 301 006-1 V1.2.3:1998 Q3 interface at the Local Exchange (LE) for line and circuit testing of analogueand Integrated Services Digital network (ISDN) subscriber lines; Part 1: Q3interface specification
45. EN 301 007-1 V1.1.3:1998 Integrated Services Digital Network (ISDN); Signalling System No.7;Operations, Mainten. & Administration Part (OMAP); Part 1: Protocol specifica.
46. EN 301 007-2 V1.2.3:2000 Integrated Services Digital Network (ISDN); Signalling System No.7;Operations, Maintenance and Administration Part (OMAP); Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification
47. EN 301 008 V1.1.2:1998 Integrated Services Digital Network (ISDN); Signalling System No.7; SignallingConnection Control Part (SCCP); Interoperability test specification
48. EN 301 011 V1.1.1:1998 Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for Narrow-Band Direct-Printing (NBDP) NAVTEX receivers operating in the maritime mobile service
49. EN 301 021 V1.1.1:1998 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Time Division Multiple Access (TDMA); Point-to-multipoint DRRS inFrequency Division Duplex (FDD) bands in the range 3 GHz to 11 GHz
50. EN 301 021 V1.2.1:2000 Fixed Radio Systems; Point-to-multipoint equipment; Time Division MultipleAccess (TDMA); Point-to-multipoint radio systems in the Frequency DivisionDuplex (FDD) bands in the range 3 GHz to 11 GHz
51. EN 301 021 V1.3.1:2000 Fixed Radio Systems; Point-to-multipoint equipment; Time Division MultipleAccess (TDMA); Point-to-Multipoint digital radio systems in frequency bandsin the range 3 GHz to 11 GHz
52. EN 301 021 V1.4.1:2001 Fixed Radio Systems; Point-to-multipoint equipment; Time Division MultipleAccess (TDMA); Point-to-multipoint digital radio systems in frequency bandsin the range 3 GHz to 11 GHz
53. EN 301 021 V1.5.1:2002 Fixed Radio Systems; Point-to-multipoint equipment; Time Division MultipleAccess (TDMA); Point-to-multipoint digital radio systems in frequency bandsin the range 3 GHz to 11 GHz
54. EN 301 021 V1.6.1:2003 Fixed Radio Systems; Point-to-multipoint equipment; Time Division MultipleAccess (TDMA); Point-to-multipoint digital radio systems in frequency bandsin the range 3 GHz to 11 GHz
55. EN 301 025 V1.1.1:1998 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Technical
21
characteristics and methods of measurement for VHF radiotelephoneequipment for general communications and associated equipment for Class DDigital Selective Calling (DSC)
56. EN 301 025-1 V1.1.2:2000 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 1: Technicalcharacteristics and methods of measurement
57. EN 301 025-1 V1.2.1:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 1: Technicalcharacteristics and methods of measurement
58. EN 301 025-1 V1.3.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 1: Technicalcharacteristics and methods of measurement
59. EN 301 025-1 V1.4.1:2000 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 1: Technicalcharacteristics and methods of measurement
60. EN 301 025-1 V1.4.1:2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 1: Technicalcharacteristics and methods of measurement
61. EN 301 025-2 V1.1.1:2000 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 2: Harmonized ENunder article 3.2 of the R&TTE Directive
62. EN 301 025-2 V1.2.1:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 2: Harmonized ENunder article 3.2 of the R&TTE Directive
63. EN 301 025-2 V1.3.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 2: Harmonized ENunder article 3.2 of the R&TTE Directive
64. EN 301 025-3 V1.1.1:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 3: Harmonized ENunder article 3.3 (e) of the R&TTE Directive
65. EN 301 025-3 V1.2.1:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 3: Harmonized ENunder article 3.3 (e) of the R&TTE Directive
66. EN 301 025-3 V1.3.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHFradiotelephone equipment for general communications and associatedequipment for Class D Digital Selective Calling (DSC); Part 3: Harmonized ENunder article 3.3 (e) of the R&TTE Directive
22
67. EN 301 029-1 V1.1.2:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 1: Overview of the B-ISDN networknode interface signalling capability set 2, step 1 [ITU-T RecommendationQ.2721.1 (1996)]
68. EN 301 029-10 V1.1.3:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 10: Support of frame relay [ITU-TRecommendation Q.2727 (1996)]
69. EN 301 029-2 V1.1.2:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 2: Network node interface specificationfor point-to-multipoint call/connection control [ITU-T RecommendationQ.2722.1 (1996)]
70. EN 301 029-3 V1.2.3:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 3: Support of additional trafficparameters for Statistical Bit Rate (SBR), Available Bit Rate (ABR), ATM BlockTransfer (ABT) and Quality of Service (QoS) [ITU-T Recommendations Q.2723.1(1996), Q.2723.2 (1997), Q.2723.3 (1997) and Q.2723.4 (1997)
71. EN 301 029-4 V1.2.1:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 4: Look-ahead without state change forthe network node interface [ITU-T Recommendation Q.2724.1 (1996)]
72. EN 301 029-5 V1.2.1:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 5: Support of negotiation duringconnection setup [ITU-T Recommendation Q.2725.1 (1996)]
73. EN 301 029-6 V1.1.2:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 6: Modification procedures [ITU-TRecommendation Q.2725.2 (1996)]
74. EN 301 029-7 V1.1.3:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 7: ATM end system address [ITU-TRecommendation Q.2726.1 (1996)]
75. EN 301 029-8 V1.1.1:1997 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 8: Call priority [ITU-T RecommendationQ.2726.2 (1996)]
76. EN 301 029-9 V1.1.2:1998 Broadband Integrated Services Digital Network (B-ISDN); Signalling SystemNo.7; B-ISDN User Part (B-ISUP); Part 9: Network generated session identifier[ITU-T Recommendation Q.2726.3 (1996)]
77. EN 301 033 V1.1.1:1998 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Technicalcharacteristics and methods of measurement for shipborne watchkeepingreceivers for reception of Digital Selective Calling (DSC) in the maritime MF,MF/HF and VHF bands
78. EN 301 033 V1.2.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Technicalcharacteristics and methods of measurement for shipborne watchkeepingreceivers for reception of Digital Selective Calling (DSC) in the maritime MF,MF/HF and VHF bands
79. EN 301 033 V1.3.1:2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Technicalcharacteristics and methods of measurement for shipborne watchkeepingreceivers for reception of Digital Selective Calling (DSC) in the maritime MF,MF/HF and VHF bands
80. EN 301 033-2 V1.1.1:1998 Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical
23
characteristics and methods of measurement for shipborne watchkeepingreceivers for reception of Digital Selective Calling (DSC) in the maritime MF,MF/HF and VHF bands Harmonised EN under article 3.2 of the R&TTEDirective
81. EN 301 039 V1.1.1:1997 Private Integrated Services Network (PISN); Mapping functions for theemployment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing
82. EN 301 039 V1.2.1:2002 Private Integrated Services Network (PISN); Mapping functions for theemployment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing [ISO/IEC 17310 (2002) modified]
83. EN 301 040 V2.0.0:1999 Terrestrial Trunked Radio (TETRA); Security; Lawful Interception (LI) interface84. EN 301 040 V2.1.1:2006 Terrestrial Trunked Radio (TETRA); Security; Lawful Interception (LI) interface85. EN 301 047 V1.1.1:1997 Private Integrated Services Network (PISN); Specification, functional models
and information flows; Transit counter additional network feature [ISO/IEC15055(1997) modified]
90. EN 301 055 V1.1.1:1998 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Direct Sequence Code Division Multiple Access (DS-CDMA); Point-to-multipoint DRRS in frequency bands in the range 1 GHz to 3 GHz
91. EN 301 055 V1.2.1:2000 Fixed Radio Systems; Point-to-multipoint equipment; Direct Sequence CodeDivision Multiple Access (DS-CDMA); Point-to-multipoint digital radio systemin frequency bands in the range 1 GHz to 3 GHz
92. EN 301 055 V1.3.1:2000 Fixed Radio Systems: Point to multipoint equipment; Direct Sequence CodeDivision Multiple Access (DS-CDMA); Point-to-multipoint digital radiosystems in frequency bands in the range 1 GHz to 3 GHz
93. EN 301 055 V1.4.1:2001 Fixed Radio Systems: Point-to-multipoint equipment; Direct Sequence CodeDivision Multiple Access (DS-CDMA); Point-to-multipoint digital radiosystems in frequency bands in the range 1 GHz to 3 GHz
94. EN 301 060-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 1:Protocol specification
95. EN 301 060-2 V1.1.3:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 2:Protocol Implementation Conformance Statement (PICS) proforma specification
96. EN 301 060-3 V1.1.3:1998 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
24
System No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 3: TestSuite Structure and Test Purposes (TSS&TP) specification for the user
97. EN 301 060-3 V1.2.1:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 3: TestSuite Structure and Test Purposes (TSS&TP) specification for the user
98. EN 301 060-3 V2.0.0:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 3: TestSuite Structure and Test Purposes (TSS&TP) specification for the user
99. EN 301 060-4 V1.1.4:1999 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Basic call control; Enhancement at the b service entry pointfor Virtual Private Network (VPN) applications; Part 4: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the user
100. EN 301 060-4 V1.2.1:1999 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Basic call control; Enhancement at the b service entry pointfor Virtual Private Network (VPN) applications; Part 4: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the user
101. EN 301 060-4 V2.0.0:1999 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Basic call control; Enhancement at the b service entry pointfor Virtual Private Network (VPN) applications; Part 4: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the user
102. EN 301 060-5 V0.0.0:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic Functional Protocol for the support ofsupplementary services at the b service entry point for Virtual private network(VPN) applications. Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the network
103. EN 301 060-5 V1.1.3:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 5: TestSuite Structure and Test Purposes (TSS&TP) specification for the network
104. EN 301 060-5 V1.2.1:1998 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Basic call control; Enhancement at the b service entry pointfor Virtual Private Network (VPN) applications; Part 5: Test Suite Structure andTest Purposes (TSS&TP) specification for the network
105. EN 301 060-5 V2.0.0:1998 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Basic call control; Enhancement at the b service entry pointfor Virtual Private Network (VPN) applications; Part 5: Test Suite Structure andTest Purposes (TSS&TP) specification for the network
106. EN 301 060-6 V1.1.4:1999 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Basic call control; Enhancement at the b service entry pointfor Virtual Private Network (VPN) applications; Part 6: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network
25
107. EN 301 060-6 V1.2.1:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 6:Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification for the network
108. EN 301 060-6 V2.0.0:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Basic call control; Enhancement at the bservice entry point for Virtual Private Network (VPN) applications; Part 6:Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification for the network
109. EN 301 061-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 1: Protocol specification
110. EN 301 061-2 V1.1.3:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 2: Protocol Implementation Conformace Statement(PICS) proforma specification
111. EN 301 061-3 V1.1.3:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for the user
112. EN 301 061-3 V1.2.1:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for the user
113. EN 301 061-3 V2.0.0:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for the user
114. EN 301 061-4 V1.1.4:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the user
115. EN 301 061-4 V1.2.1:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the user
116. EN 301 061-4 V2.0.0:1999 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
26
System No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the user
117. EN 301 061-5 V1.1.3:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the network
118. EN 301 061-5 V1.2.1:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the network
119. EN 301 061-5 V2.0.0:1998 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the network
120. EN 301 061-6 V1.1.4:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 6: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the network
121. EN 301 061-6 V1.2.1:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 6: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the network
122. EN 301 061-6 V2.0.0:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Generic functional protocol for the support ofsupplementary services at the b service entry point for Virtual Private Network(VPN) applications; Part 6: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the network
123. EN 301 062-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Signalling System No.7; Support ofVirtual Private Network (VPN) applications with Private network Q referencepoint Signalling System number 1 (PSS1) information flows; Part 1: Protocolspecification [ITU-T Recommendations Q.765.1 and Q.699.1, modified]
124. EN 301 062-1 V1.2.3:1999 Integrated Services Digital Network (ISDN); Signalling System No.7; Support ofVirtual Private Network (VPN) applications with Private network Q referencepoint Signalling System number 1 (PSS1) information flows; Part 1: Protocolspecification [ITU-T Recommendations Q.765.1 and Q.699.1, modified]
125. EN 301 062-2 V1.1.1:2000 Integrated Services Digital Network (ISDN); Signalling System No.7; Support of
27
Virtual Private Network (VPN) applications with Private network Q referencepoint Signalling System number 1 (PSS1) information flows; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification
126. EN 301 062-3 V1.1.1:2000 Integrated Services Digital Network (ISDN); Signalling System No.7; Support ofVirtual Private Network (VPN) applications with Private network Q referencepoint Signalling System number 1 (PSS1) information flows; Part 3: Test SuiteStructure and Test Purposes (TSS&TP) specification
127. EN 301 062-4 V1.1.1:2000 Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);Support of Virtual Private Network (VPN) applications with Private network Qreference point Signalling System number 1 (PSS1) information flows; Part 4:Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification
128. EN 301 064-1 V1.1.1:1998 Telecommunications Management Network (TMN); Information models andprotocols for the management and control of the Asynchronous Transfer Mode(ATM) switching network element; Part 1: Q3 interface specification
129. EN 301 064-1 V1.1.2:1999 Telecommunications Management Network (TMN); Information models andprotocols for the management and control of the Asynchronous Transfer Mode(ATM) switching network element; Part 1: Q3 interface specification
130. EN 301 065-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 1: Protocol specification
131. EN 301 065-2 V1.2.2:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 2: Protocol Implementation Conformance Statement(PICS) proforma specification
132. EN 301 065-3 V1.1.3:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for the user
133. EN 301 065-3 V2.0.0:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for the user
134. EN 301 065-4 V1.1.3:2000 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the user
135. EN 301 065-4 V1.2.1:2002 Integrated Services Digital network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Completion of Calls on No Reply (CCNR) supplementaryservice; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification for the user
136. EN 301 065-4 V2.0.0:1999 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specification forthe user
28
137. EN 301 065-5 V1.1.3:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the network
138. EN 301 065-5 V1.2.1:2002 Integrated Services Digital network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Completion of Calls on No Reply (CCNR)supplementary service; Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the network
139. EN 301 065-5 V2.0.0:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP)specification for the network
140. EN 301 065-6 V1.2.4:1999 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the network
141. EN 301 065-6 V1.3.1:2002 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Completion of Calls on No Reply (CCNR)supplementary service; Part 6: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the network
142. EN 301 065-6 V2.0.0:1999 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Digital Subscriber Signalling System No. one(DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the network
143. EN 301 067-1 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics;Negotiation during call/connection establishment phase; Part 1: Protocolspecification [ITU-T Recommendation Q.2962 (1996), modified]
144. EN 301 067-2 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Negotiationduring call/connection establishment phase; Part 2: Protocol ImplementationConformance Statement (PICS) proforma specification
145. EN 301 067-3 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Negotiationduring call/connection establishment phase; Part 3: Test Suite Structure and TestPurposes (TSS&TP) specification for the user
146. EN 301 067-3 V1.2.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Negotiationduring call/connection establishment phase; Part 3: Test Suite Structure and TestPurposes (TSS&TP) specification for the user
147. EN 301 067-4 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; Negotiationduring call/connection establishment phase; Part 4: Abstract Test Suite (ATS) andpartial Protocol Implementations eXtra Information for Testing (PIXIT) proformaspecification for the user
29
148. EN 301 067-4 V2.1.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics;Negotiation during call/connection establishment phase; Part 4: Abstract TestSuite (ATS) and partial Protocol Implementations eXtra Information for Testing(PIXIT) proforma specification for the user
149. EN 301 067-5 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics;Negotiation during call/connection establishment phase; Part 5: Test SuiteStructure and Test Purposes (TSS&TP) specification for the network
150. EN 301 067-5 V1.2.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics;Negotiation during call/connection establishment phase; Part 5: Test SuiteStructure and Test Purposes (TSS&TP) specification for the network
151. EN 301 067-6 V1.1.3:1999 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics;Negotiation during call/connection establishment phase; Part 6: Abstract TestSuite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the network
152. EN 301 067-6 V2.1.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics;Negotiation during call/connection establishment phase; Part 6: Abstract TestSuite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the network
153. EN 301 068-1 V1.2.4:1998 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 1: Protocolspecification [ITU-T Recommendations Q.2961.1 (1995), Q.2961.2 (1997),Q.2961.3 (1997), Q.2961.4 (1997), modified]
154. EN 301 068-1 V1.3.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 1: Protocolspecification [ITU-T Recommendations Q.2961.1 (1995), Q.2961.2 (1997),Q.2961.3 (1997), Q.2961.4 (1997) and Q.2961.6 (1997), modified]
155. EN 301 068-2 V1.1.3:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification
156. EN 301 068-2 V1.2.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification
157. EN 301 068-3 V1.1.2:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 3: Test Suite Structureand Test Purposes (TSS&TP) specification for the user
158. EN 301 068-3 V1.2.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATM
30
transfer capability and traffic parameter indication; Part 3: Test Suite Structureand Test Purposes (TSS&TP) specification for the user
159. EN 301 068-4 V1.1.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 4: Abstract Test Suite(ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the user
160. EN 301 068-4 V1.2.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 4: Abstract Test Suite(ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the user
161. EN 301 068-5 V1.1.2:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 5: Test Suite Structureand Test Purposes (TSS&TP) specification for the network
162. EN 301 068-5 V1.2.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 5: Test Suite Structureand Test Purposes (TSS&TP) specification for the network
163. EN 301 068-6 V1.1.1:2000 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 6: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network
164. EN 301 068-6 V1.2.1:2002 Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Connection characteristics; ATMtransfer capability and traffic parameter indication; Part 6: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the network
165. EN 301 069-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP); Application transport mechanism; Part 1: Protocol specification [ITU-TRecommendation Q.765, modified]
166. EN 301 069-1 V1.2.3:1998 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP); Application transport mechanism; Part 1: Protocol specification [ITU-TRecommendation Q.765, modified]
167. EN 301 069-1 V1.2.4:1999 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP); Application transport mechanism; Part 1: Protocol specification [ITU-TRecommendation Q.765, modified]
168. EN 301 069-1 V1.3.1:2001 Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDNUser Part (ISUP); Application transport mechanism; Part 1: Protocol specification[ITU-T Recommendation Q.765, modified]
169. EN 301 069-1 V2.0.0:1999 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP); Application transport mechanism; Part 1: Protocol specification [ITU-TRecommendation Q.765, modified]
170. EN 301 069-2 V1.1.3:2000 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN UserPart (ISUP); Application transport mechanism; Part 2: Protocol ImplementationConformance Statement (PICS) proforma specification
31
171. EN 301 069-3 V1.2.2:2000 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP); Application transport mechanism; Part 3: Test Suite Structureand Test Purposes (TSS&TP) specification
172. EN 301 070-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 interactions with the Intelligent NetworkApplication Part (INAP); Part 1: Protocol specification [ITU-T RecommendationQ.1600 (1997), modified]
173. EN 301 070-2 V1.1.2:2000 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 interactions with the Intelligent NetworkApplication Part (INAP); Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification
174. EN 301 070-3 V1.1.2:2000 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDNUser Part (ISUP) version 3 interactions with the Intelligent NetworkApplication Part (INAP); Part 3: Test Suite Structure and Test Purposes(TSS&TP) specification
175. EN 301 070-4 V1.1.2:2000 Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);ISDN User Part (ISUP) version 3 interactions with the Intelligent NetworkApplication Part (INAP); Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specification
176. EN 301 080 V1.1.1:1999 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Frequency Division Multiple Access (FDMA); Point-to-multipoint DRRS in thebands allocated to the fixed service in the range from 3 GHz to 11 GHz
177. EN 301 080 V1.2.1:2000 Fixed Radio Systems; Point-to-multipoint equipment; Frequency DivisionMultiple Access (FDMA); Point-to-multipoint digital radio systems infrequency bands in the range 3 GHz to 11 GHz
178. EN 301 080 V1.3.1:2001 Fixed Radio Systems; Point-to-multipoint equipment; Frequency DivisionMultiple Access (FDMA); Point-to-multipoint digital radio systems infrequency bands in the range 3 GHz to 11 GHz
179. EN 301 080 V1.4.1:2000 Fixed Radio Systems; Point-to-multipoint equipment;180. EN 301 082 V1.1.1:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring-Fixed
(OCB-F) supplementary service; Service description181. EN 301 082 V2.1.1:2000 Integrated Services Digital Network (ISDN); Outgoing Call Barring-Fixed
(OCB-F) supplementary service; Service description182. EN 301 084 V1.1.1:1998 Integrated Services Digital Network (ISDN); Outgoing Call Barring-User
Controlled (OCB-UC) supplementary service; Service description183. EN 301 084 V2.1.1:2000 Integrated Services Digital Network (ISDN); Outgoing Call Barring-User
Controlled (OCB-UC) supplementary service; Service description184. EN 301 086 V7.0.2:1999 Digital cellular telecommunications system (Phase 2+) (GSM); Subscriber
Identity Module (SIM) conformance test specification (GSM 11.17 version 7.0.2Release 1998)
185. EN 301 087 V5.3.1:1998 Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); BaseStation System (BSS) equipment specification; Radio aspects (GSM 11.21version 5.3.1)
186. EN 301 087 V5.4.1:1999 Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); BaseStation System (BSS) equipment specification; Radio aspects (GSM 11.21version 5.4.1)
32
187. EN 301 087 V7.1.1:1999 Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); BaseStation System (BSS) equipment specification; Radio aspects (GSM 11.21version 7.1.1 Release 1998)
188. EN 301 087 V7.2.1:2000 Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); BaseStation System (BSS) equipment specification; Radio aspects (GSM 11.21version 7.2.1 Release 1998)
189. EN 301 087 V8.1.1:2000 Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); BaseStation System (BSS) equipment specification; Radio aspects (GSM 11.21version 8.1.1 Release 1999)
190. EN 301 087 V8.2.1:2000 Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); BaseStation System (BSS) equipment specification; Radio aspects (GSM 11.21version 8.2.1 Release 1999)
191. EN 301 089 V1.1.1:1997 Electromagnetic compatibility and Radio spectrum Matters (ERM); MaritimeVery High Frequency (VHF) distress radio equipment operating onaeronautical frequencies; Harmonised EN under article 3.2 of the R&TTEDirective
192. EN 301 090 V1.1.1:1998 Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for maritime radiotelephonewatch receivers operating on 2 182 kHz
193. EN 301 091 V1.1.1:1998 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); RoadTransport and Traffic Telematics (RTTT); Technical characteristics and testmethods for radar equipment operating in the 76 GHz to 77 GHz band
194. EN 301 091-1 V1.2.1:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Radar equipmentoperating in the 76 GHz to 77 GHz and 24 GHz range; Part 1: TechnicalRequirements and methods of measurement
195. EN 301 091-1 V1.2.1:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Radar equipment operatingin the 76 GHz to 77 GHz range; Part 1: Technical characteristics and test methodsfor radar equipment operating in the 76 GHz to 77 GHz range
196. EN 301 091-1 V1.3.3:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Radar equipment operatingin the 76 GHz to 77 GHz range; Part 1: Technical characteristics and test methodsfor radar equipment operating in the 76 GHz to 77 GHz range
197. EN 301 091-2 V1.1.1:2001 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Radar equipment operatingin the 76 GHz to 77 GHz and 24 GHz range; Part 2: Harmonized EN coveringessential requirements of article 3.2 of the R&TTE Directive
198. EN 301 091-2 V1.2.1:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Radar equipment operatingin the 76 GHz to 77 GHz range; Part 2: Harmonised EN covering essentialrequirements of article 3.2 of the R&TTE Directive
199. EN 301 091-2 V1.2.2:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Radar equipment operatingin the 76 GHz to 77 GHz range; Part 2: Harmonised EN covering essentialrequirements of article 3.2 of the R&TTE Directive
201. EN 301 099-1 V1.1.1:1997 Telecommunications Security; Trusted Third Parties (TTP); Specification forTTP services; Part 1: Key management and key escrow/recovery
202. EN 301 102 V1.1.1:1998 Private Integrated Services Network (PISN); Mapping functions for theemployement of a circuit mode basic service and the supplementary serviceuser-to-user signalling as a pair of on-demand inter-PINX connections
203. EN 301 104 V1.1.1:1998 Human Factors (HF); Human factors requirements for a European TelephonyNumbering Space (ETNS)
204. EN 301 113 V6.1.1:1998 Digital cellular telecommunications system (Phase 2+) (GSM); General PacketRadio Service (GPRS); Service description; Stage 1 (GSM 02.60 version 6.1.1)
205. EN 301 113 V6.2.1:1999 Digital cellular telecommunications system (Phase 2+) (GSM); General PacketRadio Service (GPRS); Service description; Stage 1 (GSM 02.60 version 6.2.1Release 1997)
206. EN 301 113 V6.3.1:2000 Digital cellular telecommunications system (Phase 2+) (GSM); General PacketRadio Service (GPRS); Service description; Stage 1 (GSM 02.60 version 6.3.1Release 1997)
207. EN 301 117 V1.1.1:1998 Broadband Integrated Services Digital Network (B-ISDN); ATM AdaptationLayer (AAL); Sublayers: Service Specific Co-ordination Function (SSCF) toprovide the Connection-Oriented Transport Service (COTS) [ITU-TRecommendation I.365.3 (1995)]
208. EN 301 124 V1.1.1:1998 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Direct Sequence Code Division Multiple Access (DS-CDMA) point-to-multipoint DRRS in frequency bands in the range 3 GHz to 11 GHz
209. EN 301 124 V1.2.1:2001 Fixed Radio Systems; Point-to-multipoint equipment; Direct Sequence CodeDivision Multiple Access (DS-CDMA) point-to-multipoint digital radio systemsin frequency bands in the range 3 GHz to 11 GHz
210. EN 301 126-1 V1.1.2:1999 Fixed Radio Systems; Conformance testing; Part 1: Point-to-point equipment -Definitions, general requirements and test procedures
211. EN 301 126-1 V1.2.1:1999 Fixed Radio Systems; Conformance testing; Part 1: Point-to-point equipment -Definitions, general requirements and test procedures
212. EN 301 126-2-1 V1.1.1:2000 Fixed Radio Systems; Conformance testing; Part 2-1: Point-to-Multipointequipment; Definitions and general requirements
213. EN 301 126-2-2 V1.1.1:2000 Fixed Radio Systems; Conformance testing; Part 2-2: Point-to-Multipointequipment; Test procedures for FDMA systems
214. EN 301 126-2-3 V1.1.1:2000 Fixed Radio Systems; Conformance testing; Part 2-3: Point-to-Multipointequipment; Test procedures for TDMA systems
215. EN 301 126-2-3 V1.2.1:2004 Fixed Radio Systems; Conformance testing; Part 2-3: Point-to-Multipointequipment; Test procedures for TDMA systems
216. EN 301 126-2-4 V1.1.1:2000 Fixed Radio Systems; Conformance testing; Part 2-4: Point-to-Multipointequipment; Test procedures for FH-CDMA systems
217. EN 301 126-2-5 V1.1.1:2000 Fixed Radio Systems; Conformance testing; Part 2-5: Point-to-Multipointequipment; Test procedures for DS-CDMA systems
218. EN 301 126-2-6 V1.1.1:2002 Fixed Radio Systems; Conformance testing; Part 2-6: Point-to-Multipointequipment; Test procedures for Multi Carrier Time Division Multiple Access(MC-TDMA) systems
219. EN 301 126-3-1 V1.1.1:2000 Fixed Radio Systems; Conformance testing; Part 3-1: Point-to-Point antennas;Definitions, general requirements and test procedures
34
220. EN 301 126-3-1 V1.1.2:2002 Fixed Radio Systems; Conformance testing; Part 3-1: Point-to-Point antennas;Definitions, general requirements and test procedures
221. EN 301 126-3-2 V1.1.1:2001 Fixed Radio Systems; Conformance testing; Part 3-2: Point-to-Multipointantennas - Definitions, general requirements and test procedures
222. EN 301 126-3-2 V1.2.1:2003 Fixed Radio Systems; Conformance testing; Part 3-2: Point-to-Multipointantennas - Definitions, general requirements and test procedures
223. EN 301 127 V1.1.1:2000 Fixed Radio Systems; Point-to-point equipment; High capacity digital radiosystems carrying SDH signals (2 x STM-1) in frequency bands with about 30MHz channel spacing and using Co-Channel Dual Polarized (CCDP) operation
224. EN 301 127 V1.2.1:1999 Fixed Radio Systems; Point-to-point equipment; High capacity digital radiosystems carrying SDH signals (2 x STM-1) in frequency bands with about 30MHz channel spacing and using Co-Channel Dual Polarized (CCDP) operation
225. EN 301 127 V1.2.1:2001 Fixed Radio Systems; Point-to-point equipment; High capacity digital radiosystems carrying SDH signals (up to 2 x STM-1) in frequency bands with about30 MHz channel spacing and using Co-polar arrangements or Co-Channel DualPolarized (CCDP) operation
226. EN 301 127 V1.3.1:2002 Fixed Radio Systems; Point-to-point equipment; High capacity digital radiosystems carrying SDH signals (up to 2 x STM-1) in frequency bands with about30 MHz channel spacing and using co-polar arrangements or Co-Channel DualPolarized (CCDP) operation
227. EN 301 128 V1.1.1:1999 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Plesiochronous Digital Hierarchy (PDH); Low and medium capacity DRRSoperating in the 13 GHz, 15 GHz and 18 GHz frequency bands
228. EN 301 128 V1.1.2:2000 Fixed Radio Systems; Point-to-point equipment; Plesiochronous DigitalHierarchy (PDH); Low and medium capacity digital radio systems operating inthe 13 GHz, 15 GHz and 18 GHz frequency bands
229. EN 301 128 V1.2.1:2001 Fixed Radio Systems; Point-to-point equipment; Plesiochronous DigitalHierarchy (PDH); Low and medium capacity digital radio systems operating inthe 13 GHz, 15 GHz and 18 GHz frequency bands
230. EN 301 129 V1.1.1:1998 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Synchronous Digital Hierarchy (SDH); System performance monitoringparameters of SDH DRRS
231. EN 301 129 V1.1.2:1999 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS);Synchronous Digital Hierarchy (SDH); System performance monitoringparameters of SDH DRRS
232. EN 301 131 V1.1.1:1999 Integrated Services Digital Network (ISDN); Teleaction teleservice; Servicedescription
233. EN 301 132 V1.1.1:1998 Integrated Services Digital Network (ISDN); Security tools (SET) for use withintelecommunication services
234. EN 301 133 V1.1.1:1998 Integrated Services Digital Network (ISDN); Selective Call Forwarding (SCF)supplementary services (unconditional, busy and no reply); Service description
235. EN 301 134 V1.1.1:1998 Integrated Services Digital Network (ISDN); Completion of Calls on No Reply(CCNR) supplementary service; Service description
236. EN 301 137 V1.1.1:1998 Integrated Services Digital Network (ISDN); Signalling System No.7;Transaction Capabilities (TC); Application Service Element (ASE) for UserSignalling Bearer Service (USBS)
35
237. EN 301 138 V1.1.1:1998 Cordless Terminal Mobility (CTM); Application of an information model toCore INAP CS-2; CTM Phase 1 specification
238. EN 301 140-1 V1.3.4:1999 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 1: Protocol specification
239. EN 301 140-2 V0.0.0:1999 Intelligent Network (IN); Intelligent Network Capability Set 2 (CS2); (PICS)Proforma Specification for the SCP, SCF-SSF, SCF-SRF and SCF-CUSF.
240. EN 301 140-2 V1.3.3:1999 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 2: Protocol Implementation Conformance Statement(PICS) proforma specification
241. EN 301 140-2 V1.4.1:2002 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 2: Protocol Implementation Conformance Statement(PICS) proforma specification
242. EN 301 140-3-1 V1.1.3:2000 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for Service Switching Function (SSF); Sub-part 1: Basic capabilityset of CS-1 including CS-2 complements
243. EN 301 140-3-2 V1.1.3:2000 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for Service Switching Function (SSF); Sub-part 2: Call PartyHandling (CPH)
244. EN 301 140-3-3 V1.1.3:2000 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification for Service Switching Function (SSF); Sub-part 3: SpecializedResource Functions (SRF)
245. EN 301 140-4-1 V1.1.3:2000 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 4: Abstract Test Suite (ATS) specification and PartialProtocol Implementation eXtra Information for Testing (PIXIT) proforma forService Switching Function (SSF); Sub-part 1: Basic capability set of CS-1including CS-2 complements
246. EN 301 140-4-2 V1.1.3:2000 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 4: Abstract Test Suite (ATS) specification and PartialProtocol Implementation eXtra Information for Testing (PIXIT) proforma forService Switching Function (SSF); Sub-part 2: Call Party Handling (CPH)
247. EN 301 140-4-3 V1.1.3:2000 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 4: Abstract Test Suite (ATS) specification and PartialProtocol Implementation eXtra Information for Testing (PIXIT) proforma forService Switching Function (SSF); Sub-part 3: Specialized Resource Functions
248. EN 301 140-5 V1.1.3:1999 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Part 5: Distributed Functional Plane (DFP) [ITU-TRecommendation Q.1224 (1997), modified]
249. EN 301 141-1 V1.2.2:1998 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 1: NMDS interface specification
250. EN 301 141-1 V2.1.1:2000 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 1: NMDS interface specification
251. EN 301 141-2 V1.2.2:1998 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification
36
252. EN 301 141-2 V1.3.1:2001 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification
253. EN 301 141-3 V1.1.1:2002 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 3: Test Suite Structure and Test Purposes(TSS&TP) specification for the data link layer (NTN side)
254. EN 301 141-3 V1.2.1:1998 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 3: Test Suite Structure and Test Purposes(TSS&TP) specification for the user
255. EN 301 141-4 V1.1.1:2002 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 4: Test Suite Structure and Test Purposes(TSS&TP) specification for the network layer (NTN side)
256. EN 301 141-4 V1.2.1:1998 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specificationfor the user
257. EN 301 141-5 V1.1.1:2002 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 5: Test Suite Structure and Test Purposes(TSS&TP) specification for the network layer (LE side)
258. EN 301 141-6 V1.1.1:2002 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 6: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) specification for theNMDS Layer 2 PSTN-GW function (NTN side)
259. EN 301 141-7 V1.1.1:2002 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 7: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) specification for thePSTN NMDS interface Layer 3 (NTN side)
260. EN 301 141-8 V1.1.1:2002 Integrated Services Digital Network (ISDN); Narrowband Multi-serviceDelivery System (NMDS); Part 8: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT) specification for thePSTN NMDS interface Layer 3 (LE side)
261. EN 301 142-1 V1.1.3:1998 Integrated Services Digital Network (ISDN); User Signalling Bearer Service(USBS); Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:Protocol specification
262. EN 301 142-2 V1.1.3:1998 Integrated Services Digital Network (ISDN); User Signalling Bearer Service(USBS); Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2:Protocol Implementation Conformance Statement (PICS) proforma specification
263. EN 301 142-3 V1.1.1:1999 Integrated Services Digital Network (ISDN); User Signalling Bearer Service(USBS); Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3:Test Suite Structure and Test Purposes (TSS&TP) specification for the user
264. EN 301 142-5 V1.1.2:1999 Integrated Services Digital Network (ISDN); User Signalling Bearer Service(USBS); Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5:Test Suite Structure and Test Purposes (TSS&TP) specification for the network
265. EN 301 143 V1.1.4:1999 Intelligent Network (IN); Intelligent Network Application Protocol (INAP);Capability Set 2 (CS2); Cordless Terminal Mobility (CTM); Stage 3specifications for Service Control Function (SCF); SCF and Call UnrelatedService Function (CUSF)/Service Switching Function (SSF); SCF interface
37
266. EN 301 144-1 V1.1.2:2000 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 (SS7) protocols; Signallingapplication for the mobility management service on the alpha interface; Part 1:Protocol specification
267. EN 301 144-2 V1.1.1:2000 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 (SS7) protocols; Signallingapplication for the mobility management service on the alpha interface; Part 2:Protocol Implementation Conformance Statement (PICS) proforma specification
268. EN 301 144-3 V1.1.3:2000 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 protocols; Signallingapplication for the mobility management service on the alpha interface; Part 3:Test Suite Structure and Test Purposes (TSS&TP) specification for the user
269. EN 301 144-4 V1.1.4:2000 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 protocols; Signallingapplication for the mobility management service on the alpha interface; Part 4:Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification for the user
270. EN 301 144-5 V1.1.5:2000 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 (SS7) protocols; Signallingapplication for the mobility management service on the alpha interface; Part 5:Test Suite Structure and Test Purposes (TSS&TP) specification for the network
271. EN 301 144-6 V1.1.1:2000 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) and Signalling System No.7 (SS7) protocols; Signallingapplication for the mobility management service on the alpha interface; Part 6:Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification for the network
272. EN 301 145-1 V1.1.4:1999 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling Syst.No. one (DSS1) protocol; Teleaction service; Part 1: Protocol specification
273. EN 301 145-2 V1.1.4:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Teleaction service; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification
274. EN 301 145-2 V1.2.1:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Teleaction service; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification
275. EN 301 145-2 V1.2.1:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Teleaction service; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification
276. EN 301 145-3 V1.1.6:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Teleaction service; Part 3: Test Suite Structureand Test Purposes (TSS&TP) specification for the End User Terminal (EUT)
277. EN 301 145-5 V1.1.6:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Teleaction service; Part 5: Test Suite Structureand Test Purposes (TSS&TP) specification for the Service Provider Terminal
278. EN 301 145-7 V1.1.6:1999 Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol;Teleaction service; Part 7: Test Suite Structureand Test Purposes (TSS&TP) specification for the Teleaction ManagementFunction (TMF)
38
279. EN 301 152-1 V1.2.2:1998 Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1) extension;Intelligent Network Application Protocol (INAP); Customised Applications forMobile network Enhanced Logic (CAMEL); Part 1: Protocol specification
281. EN 301 155 V1.1.1:1998 Synchronous Digital Hierarchy (SDH); Unidirectional performance monitoringfor the network element view
282. EN 301 246 V4.0.1:1997 Digital cellular telecommunications system (Phase 2) (GSM); Substitution andmuting of lost frames for Enhanced Full Rate (EFR) speech traffic channels(GSM 06.61 version 4.0.1)
283. EN 301 247 V4.0.1:1997 Digital cellular telecommunications system (Phase 2) (GSM); Comfort noiseaspects for Enhanced Full Rate (EFR) speech traffic channels (GSM 06.62version 4.0.1)
284. EN 301 254 V1.1.1:1998 Private Integrated Services Network (PISN); Specification, functional modelsand information flows; Advice of Charge (AoC) supplementary services[ISO/IEC 15049 (1997), modified]
285. EN 301 255 V1.2.1:2004 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;Message waiting indication supplementary service [ISO/IEC 15506 (2003),modified]
289. EN 301 264 V1.1.1:1998 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;Advice of Charge (AoC) supplementary service [ISO/IEC 15050 (1997),modified]
290. EN 301 479 V1.1.2:2000 Integrated Services Digital Network (ISDN); Line Hunting (LH) supplementaryservice; Service description
291. EN 301 502 V12.1.1:2015 Global System for Mobile communications (GSM); Harmonized EN for BaseStation Equipment covering the essential requirements of article 3.2 of theR&TTE Directive
292. EN 301 545-2 V1.1.1:2012 Digital Video Broadcasting (DVB); Second Generation DVB Interactive SatelliteSystem (DVB-RCS2); Part 2: Lower Layers for Satellite standard
293. EN 301 545-2 V1.2.1:2014 Digital Vid Seco Interactive Sa Part 2: Lower European Standard 301 545-2V1.2.1 (201 ideo Broadcasting (DVB); cond Generation DVB Satellite System(DVB-RCS2); er Layers for Satellite standard 2014-04) 2); ard
294. EN 301 691 V1.1.1:2001 Integrated Services Digital Network (ISDN); Remote Control (RC) service;Service description
295. EN 301 775 V1.1.1:2000 Digital Video Broadcasting (DVB); Specification for the carriage of VerticalBlanking Information (VBI) data in DVB bitstreams
39
296. EN 301 775 V1.2.1:2003 Digital Video Broadcasting (DVB); Specification for the carriage of VerticalBlanking Information (VBI) data in DVB bitstreams
297. EN 301 790 V1.2.2:2000 Digital Video Broadcasting (DVB); Interaction channel for satellite distributionsystems
298. EN 301 790 V1.3.1:2003 Digital Video Broadcasting (DVB); Interaction channel for satellite distributionsystems
299. EN 301 790 V1.4.1:2005 Digital Video Broadcasting (DVB); Interaction channel for satellite distributionsystems
300. EN 301 790 V1.5.1:2009 Digital Video Broadcasting (DVB); Interaction channel for satellite distributionsystems
302. EN 301 813-1 V1.1.1:2000 Integrated Services Digital Network (ISDN) and Broadband Integrated ServicesDigital Network (B-ISDN); Generic Addressing and Transport (GAT) protocol;Part 1: Protocol specification [ITU-T Recommendation Q.860 (2000), modified]
303. EN 301 813-2 V1.1.1:2001 Integrated Services Digital Network (ISDN) and Broadband Integrated ServicesDigital Network (B-ISDN); Generic Addressing and Transport (GAT) protocol;Part 2: Protocol Implementation Conformance Statement (PICS) proformaspecification
304. EN 301 813-3 V1.1.1:2002 Integrated Services Digital Network (ISDN) and Broadband Integrated ServicesDigital Network (B-ISDN); Generic Addressing and Transport (GAT) protocol;Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification
305. EN 301 813-4 V1.1.1:2002 Integrated Services Digital Network (ISDN) and Broadband Integrated ServicesDigital Network (B-ISDN); Generic Addressing and Transport (GAT) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification
306. EN 301 819 V1.1.1:2000 Private Integrated Services Network (PISN); Specification, functional modelsand information flows; Common information Additional Network Feature(ANF) [ISO/IEC 15771 (1998), modified]
308. EN 301 821 V1.2.1:2004 Private Integrated Services Network (PISN); Inter-exchange signalling protocol;Private User Mobility (PUM); Registration supplementary service [ISO/IEC17876 (2003), modified]
309. EN 301 842-1 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Data Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 1: Generaldescription and physical layer
310. EN 301 842-1 V1.2.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 1: EN forground equipment
311. EN 301 842-1 V1.3.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics
40
and methods of measurement for ground-based equipment; Part 1: EN forground equipment
312. EN 301 842-1 V1.3.2:2010 VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technicalcharacteristics and methods of measurement for ground-based equipment; Part1: EN for ground equipment
313. EN 301 842-1 V1.4.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 1: Generaldescription and physical layer
314. EN 301 842-2 V1.1.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Data Link (VDL) Mode 4 radio equipment; Technical characteristics &methods of measurement for ground-based equipment; Part 2: Data link layer
315. EN 301 842-2 V1.2.1:2003 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Data Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 2: Data linklayer
316. EN 301 842-2 V1.3.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Data Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 2: Data linklayer
317. EN 301 842-2 V1.4.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 2: Generaldescription and data link layer
318. EN 301 842-2 V1.5.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 2: Generaldescription and data link layer
319. EN 301 842-2 V1.6.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 2: Generaldescription and data link layer
320. EN 301 842-2 V1.6.1:2010 VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technicalcharacteristics and methods of measurement for ground-based equipment; Part2: General description and data link layer
321. EN 301 842-3 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 3: Additionalbroadcast aspects
322. EN 301 842-3 V1.2.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 3: Additionalbroadcast aspects
323. EN 301 842-3 V1.3.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 3: Additionalbroadcast aspects
41
324. EN 301 842-3 V1.3.1:2010 VHF air-ground digital Link (VDL) Mode 4 radio equipment; Technicalcharacteristics and methods of measurement for ground-based equipment; Part3: Additional broadcast aspects
325. EN 301 842-4 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 4: Point-to-point functions
326. EN 301 842-4 V1.2.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 4: Point-to-point functions
327. EN 301 842-4 V1.3.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 4: Point-to-point functions
328. EN 301 842-5 V1.2.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for ground-based equipment; Part 5: VDL4ground-based equipment compliance with the SES 552/2004 interoperabilityRegulation
329. EN 301 908-2 V6.2.1:2013 IMT cellular networks; Harmonized EN covering the essential requirements ofarticle 3.2 of the R&TTE Directive; Part 2: CDMA Direct Spread (UTRA FDD)User Equipment (UE)
330. EN 302 017-1 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM);Transmitting equipment for the Amplitude Modulated (AM) soundbroadcasting service; Part 1: Technical characteristics and test methods
331. EN 302 018-1 V1.2.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM);Transmitting equipment for the Frequency Modulated (FM) soundbroadcasting service; Part 1: Technical characteristics and test methods
332. EN 302 036 V1.1.1:2003 Corporate telecommunication Networks (CN); Signalling interworkingbetween QSIG and H.323; Basic Services [Endorsement of ISO 23289 (2002) mod
333. EN 302 037 V1.1.1:2003 Private Integrated Services Network (PISN); Mapping functions for thetunnelling of QSIG through H.323 networks [Endorsement of ISO/IEC 23290(2002) modified]
334. EN 302 039-1 V1.1.1:2002 Intelligent Network (IN); Intelligent Network Capability Set 4 (CS4); IntelligentNetwork Application Protocol (INAP); Protocol specification; Part 1: Commonaspects
335. EN 302 039-2 V1.1.2:2002 Intelligent Network (IN); Intelligent Network Capability Set 4 (CS4); IntelligentNetwork Application Protocol (INAP); Protocol specification; Part 2: ServiceSwitching Function - Switching Control Function (SSF-SCF) Interface
336. EN 302 054-1 V1.1.1:2003 Electromagnetic compatibility and Radio spectrum Matters (ERM);Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to406 MHz frequency range with power levels ranging up to 200 mW; Part 1:Technical characteristics and test methods
337. EN 302 064-1 V1.1.2:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); WirelessVideo Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 1:Technical characteristics and methods of measurement
42
338. EN 302 066-1 V1.2.1:2008 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground-and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 1:Technical characteristics and test methods
339. EN 302 077-1 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM);Transmitting equipment for the Terrestrial - Digital Audio Broadcasting (T-DAB) service; Part 1: Technical characteristics and test methods
340. EN 302 084 V1.1.1:2000 Transmission and Multiplexing (TM); The control of jitter and wander intransport networks
341. EN 302 099 V2.1.1:2014 Environmental Engineering (EE); Powering of equipment in access network342. EN 302 109 V1.1.1:2003 Terrestrial Trunked Radio (TETRA); Security; Synchronization mechanism for
end-to-end encryption343. EN 302 120 V1.1.1:2003 Services and Protocols for Advanced Networks (SPAN); Operation of the
Bearer Independant Call Control (BICC) protocol with SIG.4/PNNI1.0/AINIsignalling specification [ATM Forum specification AF-CS-VMOA-0146.000(2000) modified]
344. EN 302 152-1 V1.1.1:2003 Electromagnetic compatibility and Radio spectrum Matters (ERM); SatellitePersonal Locator Beacons (PLBs) operating in the 406,0 MHz to 406,1 MHzfrequency band; Part 1: Technical characteristics and methods of measurement
345. EN 302 194-1 V1.1.2:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigationradar used on inland waterways: Part 1: Technical characteristics and methodsof measurement
346. EN 302 195-1 V1.1.1:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radioequipment in the frequency range 9 kHz to 315 kHz for Ultra Low PowerActive Medical Implants (ULP-AMI) and accessories; Part 1: Technicalcharacteristics and test methods
347. EN 302 208-1 V1.4.1:2011 Electromagnetic compatibility and Radio spectrum Matters (ERM); RadioFrequency Identification Equipment operating in the band 865 MHz to 868MHz with power levels up to 2 W; Part 1: Technical requirements and methodsof measurement
348. EN 302 208-1 V2.1.1:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); RadioFrequency Identification Equipment operating in the band 865 MHz to 868MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz withpower levels up to 4 W; Part 1: Technical requirements and methods ofmeasurement
349. EN 302 208-2 V2.1.1:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); RadioFrequency Identification Equipment operating in the band 865 MHz to 868MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz withpower levels up to 4 W; Part 2: Harmonized EN covering the essentialrequirements of article 3.2 of the R&TTE Directive
350. EN 302 245-1 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM);Transmitting equipment for the Digital Radio Mondiale (DRM) broadcastingservice; Part 1: Technical characteristics and test methods
351. EN 302 264-1 V1.1.1:2009 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices; Road Transport and Traffic Telematics (RTTT); Short Range Radarequipment operating in the 77 GHz to 81 GHz band; Part 1: Technicalrequirements and methods of measurement
352. EN 302 288-1 V1.6.1:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range
43
Devices; Road Transport and Traffic Telematics (RTTT); Short range radarequipment operating in the 24 GHz range; Part 1: Technical requirements andmethods of measurement
353. EN 302 291-1 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Close Range Inductive Data Communication equipmentoperating at 13,56 MHz; Part 1: Technical characteristics and test methods
354. EN 302 296 V1.1.1:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM);Transmitting equipment for the digital television broadcast service, Terrestrial(DVB-T); Harmonized EN under article 3.2 of the R&TTE Directive
355. EN 302 304 V1.1.1:2004 Digital Video Broadcasting (DVB); Transmission System for HandheldTerminals (DVB-H)
356. EN 302 307 V1.3.1:2013 Digital Video Broadcasting (DVB); Second generation framing structure,channel coding and modulation systems for Broadcasting, Interactive Services,News Gathering and other broadband satellite applications (DVB-S2)
357. EN 302 307-1 V1.4.1:2014 Digital Video Broadcasting (DVB); Second generation framing structure,channel coding and modulation systems for Broadcasting, Interactive Services,News Gathering and other broadband satellite applications; Part 1: DVB-S2
358. EN 302 307-2 V1.1.1:2015 Digital Video Broadcasting (DVB); Second generation framing structure,channel coding and modulation systems for Broadcasting, Interactive Services,News Gathering and other broadband satellite applications; Part 2: DVB-S2Extensions (DVB-S2X)
359. EN 302 326-1 V1.2.2:2007 Fixed Radio Systems; Multipoint Equipment and Antennas; Part 1: Overviewand Requirements for Digital Multipoint Radio Systems
360. EN 302 372-1 V1.2.1:2011 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Equipment for Detection and Movement; Tanks Level ProbingRadar (TLPR) operating in the frequency bands 5,8 GHz, 10 GHz, 25 GHz, 61GHz and 77 GHz; Part 1: Technical characteristics and test methods
361. EN 302 510-1 V1.1.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radioequipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low PowerActive Medical Membrane Implants and Accessories; Part 1: Technicalcharacteristics and test methods
362. EN 302 536-1 V1.1.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz;Part 1: Technical characteristics and test methods
363. EN 302 537-1 V1.1.2:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Ultra Low Power Medical Data Service Systems operating in thefrequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Part 1:Technical characteristics and test methods
364. EN 302 550-1-1 V1.1.1 (2010-02) Satellite Earth Stations and Systems (SES); Satellite Digital Radio (SDR)Systems; Part 1: Physical Layer of the Radio Interface; Sub-part 1: OuterPhysical Layer
365. EN 302 550-1-2 V1.1.1 (2010-02) Satellite Earth Stations and Systems (SES); Satellite Digital Radio (SDR)Systems; Part 1: Physical Layer of the Radio Interface; Sub-part 2: Inner PhysicalLayer Single Carrier Modulation
366. EN 302 550-1-3 V1.1.1 (2010-02) Satellite Earth Stations and Systems (SES); Satellite Digital Radio (SDR)Systems; Part 1: Physical Layer of the Radio Interface; Sub-part 3: Inner PhysicalLayer Multi Carrier Modulation
44
367. EN 302 617-1 V1.1.1 (2009-01) Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground-based UHF radio transmitters, receivers and transceivers for the UHFaeronautical mobile service using amplitude modulation; Part 1: Technicalcharacteristics and methods of measurement
368. EN 302 636-1 V1.2.1 (2014-04) Intelligent Transport Systems (ITS); Vehicular Communications;GeoNetworking; Part 1: Requirements
369. EN 302 636-2 V1.2.1 (2013-11) Intelligent Transport Systems (ITS); Vehicular Communications;GeoNetworking; Part 2: Scenarios
370. EN 302 636-3 V1.2.1 (2014-12) Intelligent Transport Systems (ITS); Vehicular Communications;GeoNetworking; Part 3: Network Architecture
371. EN 302 636-4-1 V1.2.1 (2014-07) Intelligent Transport Systems (ITS); Vehicular Communications;GeoNetworking; Part 4: Geographical addressing and forwarding for point-to-point and point-to-multipoint communications; Sub-part 1: Media-IndependentFunctionality
372. EN 302 636-5-1 V1.2.1 (2014-08) Intelligent Transport Systems (ITS); Vehicular Communications;GeoNetworking; Part 5: Transport Protocols; Sub-part 1: Basic TransportProtocol
373. EN 302 636-6-1 V1.2.1 (2014-05) Intelligent Transport Systems (ITS); Vehicular Communications;GeoNetworking; Part 6: Internet Integration; Sub-part 1: Transmission of IPv6Packets over GeoNetworking Protocols
374. EN 302 646-1 V7.0.2 (2000-09) Integrated Services Digital Network (ISDN); Signalling System No.7; Digitalcellular telecommunications system (Phase 2+); Application of ISDN User Part(ISUP) version 3 for the ISDN-Public Land Mobile Network (PLMN) signallinginterface; Part 1: Protocol specification (GSM 09.14 version 7.0.2 Release 1998)
375. EN 302 646-2 V7.1.1 (2000-11) Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);Digital cellular telecommunications system (Phase 2+); Application of ISDNUser Part (ISUP) version 3 for the ISDN-Public Land Mobile Network (PLMN)signalling interface; Part 2: Protocol Implementation Conformance Statement(PICS) proforma specification
376. EN 302 646-3 V7.1.1 (2000-11) Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7);Digital cellular telecommunications system (Phase 2+); Application of ISDNUser Part (ISUP) version 3 for the ISDN-Public Land Mobile Network (PLMN)signalling interface; Part 3: Test Suite Structure and Test Purposes (TSS&TP)specification
377. EN 302 646-4 V7.0.1 (2000-11) Integrated Service Digital Network (ISDN); Signalling System No.7 (SS7);Digital cellular telecommunications system (Phase 2+); Application of ISDNUser Part (ISUP) version 3 for the ISDN-Public Land Mobile Network (PLMN)signalling interface; Part 4: Abstract Test Suite (ATS) and ProtocolImplementation eXtra Information for Testing (PIXIT) proforma specification
378. EN 302 663 V1.2.1 (2013-07) Intelligent Transport Systems (ITS); Access layer specification for IntelligentTransport Systems operating in the 5 GHz frequency band
379. EN 302 665 V1.1.1 (2010-09) Intelligent Transport Systems (ITS); Communications Architecture380. EN 302 842-1 V1.3.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-
ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for aeronautical mobile (airborne) equipment;Part 1: General description and physical layer
381. EN 302 842-2 V1.3.1:2010 VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment;
45
Technical characteristics and methods of measurement for aeronautical mobile(airborne) equipment; Part 2: General description and data link layer
382. EN 302 842-3 V1.3.1:2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristicsand methods of measurement for aeronautical mobile (airborne) equipment;Part 3: Additional broadcast aspects
383. EN 303 098-1 V1.2.1:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritimelow power personal locating devices employing AIS; Part 1: Technicalcharacteristics and methods of measurement
384. EN 303 098-2 V1.2.1:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritimelow power personal locating devices employing AIS; Part 2: Harmonized ENcovering the essential requirements of article 3.2 of the R&TTE Directive
385. EN 303 135 V1.1.1:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); CoastalSurveillance, Vessel Traffic Services and Harbour Radars (CS/VTS/HR);Harmonized EN covering the essential requirements of article 3.2 of the R&TTEDirective
386. EN 303 203-1 V1.1.1 (2014-11) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Medical Body Area Network Systems (MBANSs) operating inthe 2 483,5 MHz to 2 500 MHz range; Part 1: Technical characteristics and testmethods
387. EN 303 203-2 V1.1.1:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Medical Body Area Network Systems (MBANSs) operating inthe 2 483,5 MHz to 2 500 MHz range; Part 2: Harmonized EN covering theessential requirements of article 3.2 of the R&TTE Directive
388. EN 303 204-1 V1.1.1 (2014-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Network BasedShort Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876MHz frequency range with power levels ranging up to 500 mW; Part 1: Technicalcharacteristics and test methods
389. EN 303 204-2 V1.1.1:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Network BasedShort Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876MHz frequency range with power levels ranging up to 500 mW; Part 2:Harmonized EN covering the essential requirements of article 3.2 of the R&TTEDirective
390. EN 303 212 V1.1.1 (2010-06) Airport Collaborative Decision Making (A-CDM); Community Specification forapplication under the Single European Sky Interoperability Regulation EC 552/2004
391. EN 303 213-1 V1.3.1 (2012-04) Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 1:Community Specification for application under the Single European SkyInteroperability Regulation EC 552/2004 for A-SMGCS Level 1 including externalinterfaces
392. EN 303 213-2 V1.3.1 (2012-12) Advanced Surface Movement Guidance and Control System (A-SMGCS); Part2: Community Specification for application under the Single European SkyInteroperability Regulation EC 552/2004 for A-SMGCS Level 2 includingexternal interfaces
393. EN 303 213-3 V1.1.1 (2010-10) Advanced Surface Movement Guidance and Control System (A-SMGCS); Part3: Community Specification for application under the Single European SkyInteroperability Regulation EC 552/2004 for a deployed cooperative sensorincluding its interfaces
46
394. EN 303 213-4-1 V1.1.1 (2010-10) Advanced Surface Movement Guidance and Control System (A-SMGCS); Part4: Community Specification for application under the Single European SkyInteroperability Regulation EC 552/2004 for a deployed non-cooperative sensorincluding its interfaces; Sub-part 1: Generic require. for non-cooperative sensor
395. EN 303 213-4-2 V1.1.1 (2010-10) Advanced Surface Movement Guidance and Control System (A-SMGCS); Part4: Community Specification for application under the Single European SkyInteroperability Regulation EC 552/2004 for a deployed non-cooperative sensorincluding its interfaces; Sub-part 2: Specific requirements for a deployedSurface Movement Radar sensor
396. EN 303 213-6-1 V1.2.1 (2013-11) Advanced Surface Movement Guidance and Control System (A-SMGCS); Part6: Harmonized EN covering the essential requirements of article 3.2 of theR&TTE Directive for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW
397. EN 303 214 V1.2.1 (2012-04) Data Link Services (DLS) System; Community Specification for applicationunder the Single European Sky Interoperability Regulation EC 552/2004;Requirements for ground constituents and system testing
398. EN 303 215 V1.3.1 (2015-04) Environmental Engineering (EE); Measurement methods and limits for powerconsumption in broadband telecommunication networks equipment
399. EN 305 550-1 V1.2.1 (2014-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Radio equipment to be used in the 40 GHz to 246 GHzfrequency range; Part 1: Technical characteristics and test methods
400. EN 305 550-2 V1.2.1:2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Radio equipment to be used in the 40 GHz to 246 GHzfrequency range; Part 2: Harmonized EN covering the essential requirements ofarticle 3.2 of the R&TTE Directive
Technical Committee No. 12“Metrology and measurements”, 20 standards
No. Standard number English title
1. EN 12480:2015 Gas meters - Rotary displacement gas meters2. EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment;
Height gauges - Design and metrological characteristics (ISO 13225:2012)3. EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2:
Terms, definitions and surface texture parameters (ISO 25178-2:2012)4. EN ISO 17450-1:2011 Geometrical product specifications (GPS) - General concepts - Part 1: Model for
geometrical specification and verification (ISO 17450-1:20115. EN ISO 1119:2011 Geometrical product specifications (GPS) - Series of conical tapers and taper
angles (ISO 1119:2011)6. EN ISO 3040:2012 Geometrical prod. specifications (GPS) - Dimensioning and tolerancing - Cones7. EN ISO 14638:2015 Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)8. EN ISO 2692:2014 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum
material requirement (MMR), least material requirement (LMR) and reciprocityrequirement (RPR) (ISO 2692:2014)
47
9. EN ISO 16610-20:2015 Geometrical product specifications (GPS) - Filtration - Part 20: Linear profilefilters: Basic concepts (ISO 16610-20:2015)
10. EN ISO 16610-29:2015 Geometrical product specifications (GPS) - Filtration - Part 29: Linear profilefilters: Spline wavelets (ISO 16610-29:2015)
11. EN ISO 16610-1:2015 Geometrical product specifications (GPS) - Filtration - Part 1: Overview andbasic concepts (ISO 16610-1:2015)
Technical Committee No. 19“Petroleum products, lubricants and related products”, 42 standards
No. Standard number English title
1. EN ISO 13534:2000 Petroleum and natural gas industries - Drilling and production equipment -Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO13534:2000)
2. EN ISO 12736:2014 Petroleum and natural gas industries - Wet thermal insulation coatings forpipelines, flow lines, equipment and subsea structures (ISO 12736:2014)
3. EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugalcompressors and expander-compressors - Part 1: General requirements (ISO10439-1:2015)
4. EN ISO 10439-2:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugalcompressors and expander-compressors - Part 2: Non-integrally gearedcentrifugal and axial compressors (ISO 10439-2:2015)
5. EN ISO 10439-3:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugalcompressors and expander-compressors - Part 3: Integrally geared centrifugalcompressors (ISO 10439-3:2015)
6. EN ISO 10439-4:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugalcompressors and expander-compressors - Part 4: Expander-compressors(ISO10439-4:2015)
7. EN ISO 15551-1:2015 Petroleum and natural gas industries - Drilling and production equipment -Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015)
8. EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries - Metallic materialsresistant to sulfide stress cracking in corrosive petroleum refining environments(ISO 17945:2015)
9. EN ISO 19901-3:2014 Petroleum and natural gas industries - Specific requirements for offshorestructures - Part 3: Topsides structure (ISO 19901-3:2014)
10. EN 14161:2011+A1:2015 Petroleum and natural gas industries - Pipeline transportation systems (ISO13623:2009 modified)
12. EN 16136:2015 Automotive fuels - Determination of manganese and iron content in unleadedpetrol - Inductively coupled plasma optical emission spectrometry method
13. EN 16568:2014 Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel -Determination of oxidation stability by rapidly accelerated oxidation method at120 °C
48
14. CEN/TR 15745:2015 Liquid petroleum products - Determination of hydrocarbon types andoxygenates via multidimensional gas chromatography method - Round Robinresearch report
15. EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cupmethod (ISO 3679:2015)
16. EN 13203-2:2015 Gas-fired domestic appliances producing hot water - Part 2: Assessment ofenergy consumption
17. EN ISO 16948:2015 Solid biofuels - Determination of total content of carbon, hydrogen andnitrogen (ISO 16948:2015)
18. EN ISO 16967:2015 Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Naand Ti (ISO 16967:2015)
19. EN ISO 16968:2015 Solid biofuels - Determination of minor elements (ISO 16968:2015)20. EN ISO 16994:2015 Solid biofuels - Determination of total content of sulfur and chlorine (ISO
16994:2015)21. EN ISO 16995:2015 Solid biofuels - Determination of the water soluble chloride, sodium and
potassium content (ISO 16995:2015)22. EN ISO 16993:2015 Solid biofuels - Conversion of analytical results from one basis to another (ISO
16993:2015)23. ISO 10307-2:2009/Cor 1:2010 Petroleum products - Total sediment in residual fuel oils - Part 2: Determination
using standard procedures for ageing24. ISO 12152:2012 Lubricants, industrial oils and related products - Determination of the foaming
and air release properties of industrial gear oils using a spur gear test rig -Flender foam test procedure
25. ISO 15911:2000 Petroleum products - Estimation of net specific energy of aviation turbine fuelsusing hydrogen content data
26. ISO 1998-1:1998/Cor 1:1999 Petroleum industry - Terminology - Part 1: Raw materials and products27. ISO 1998-5:1998/Cor 1:1999 Petroleum industry - Terminology - Part 5: Transport, storage, distribution28. ISO 2176:1995/Cor 1:2001 Petroleum products - Lubricating grease - Determination of dropping point29. ISO 26422:2014 Petroleum and related products - Determination of shear stability of lubricating
oils containing polymers - Method using a tapered roller bearing30. ISO 2909:2002 Petroleum products - Calculation of viscosity index from kinematic viscosity31. ISO 3012:1999 Petroleum products - Determination of thiol (mercaptan) sulfur in light and
middle distillate fuels - Potentiometric method32. ISO 3014:1993 Petroleum products - Determination of the smoke point of kerosine33. ISO 3448:1992/Cor 1:1993 Industrial liquid lubricants - ISO viscosity classification34. ISO 3648:1994 Aviation fuels - Estimation of net specific energy35. ISO 3648:1994/Cor 1:1996 Aviation fuels - Estimation of net specific energy36. ISO 3771:2011 Petroleum products - Determination of base number - Perchloric acid
potentiometric titration method37. ISO 3837:1993/Cor 1:1994 Liquid petroleum products - Determination of hydrocarbon types - Fluorescent
indicator adsorption method38. ISO 3837:1993/Cor 2:1996 Liquid petroleum products - Determination of hydrocarbon types - Fluorescent
indicator adsorption method39. ISO 6247:1998/Cor 1:1999 Petroleum products - Determ. of foaming characteristics of lubricating oils40. ISO 6618:1997/Cor 1:1999 Petroleum products and lubricants - Determination of acid or base number -
Colour-indicator titration method
49
41. ISO 7537:1997 Petroleum products - Determination of acid number - Semi-micro colour-indicator titration method
42. ISO 7941:1988 Commercial propane and butane - Analysis by gas chromatography
Technical Committee No. 50“Lighting columns and spigots, and their joints”, 3 standards
No. Standard number English title
1. CEN/TR 13201-1:2014 Road lighting - Part 1: Guidelines on selection of lighting classes2. ISO 16508:1999 (CIE S
006.1/E:1998)Road traffic lights - Photometric properties of 200 mm roundel signals
3. ISO 30061:2007 (CIE S020/E:2007)
Emergency lighting
Technical Committee No. 51“Cement and building limes. Gypsum and gypsum based product”,
35 standards
No. Standard number English title
1. EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication ofwindows and doors - Determination of the resistance to artificial weathering
2. EN 1158:1997/A1:2002 Building hardware - Door cordinator devices - Requirements and test methods3. EN 12209:2003/AC:2005 Building hardware - Locks and latches - Mechanically operated locks, latches
and locking plates - Requirements and test methods4. EN 1158:1997/A1:2002/AC:2006 Building hardware - Door coordinator devices - Requirements and test methods5. EN 13830:2015 Curtain walling - Product standard6. EN 1303:2015 Building hardware - Cylinders for locks - Requirements and test methods7. EN 13561:2015 External blinds and awnings - Performance requirements including safety8. EN 13659:2015 Shutters and external venetian blinds - Performance requirements including
safety9. EN 13637:2015 Building hardware - Electrically controlled exit systems for use on escape
routes - Requirements and test methods10. EN 12217:2015 Doors - Operating forces - Requirements and classification11. EN 13120:2009+A1:2014/AC:2015 Internal blinds - Performance requirements including safety12. EN 13639:2002/AC:2004 Determination of total organic carbon in limestone13. EN 14647:2005/AC:2006 Calcium aluminate cement - Composition, specifications and conformity
criteria14. EN 459-1:2015 Building lime - Part 1: Definitions, specifications and conformity criteria15. EN 459-3:2015 Building lime - Part 3: Conformity evaluation16. EN 13282-2:2015 Hydraulic road binders - Part 2: Normal hardening hydraulic road binders -
Composition, specifications and conformity criteria
50
17. EN 15743:2010+A1:2015 Supersulfated cement - Composition, specifications and conformity criteria18. EN 13454-1:2004 Binders, composite binders and factory made mixtures for floor screeds based
on calcium sulfate - Part 1: Definitions and requirements19. EN 14246:2006/AC:2007 Gypsum elements for suspended ceilings - Definitions, requirements and test
methods20. EN 14195:2014 Metal framing components for gypsum board systems - Definitions,
requirements and test methods21. EN 13892-3:2014 Methods of test for screed materials - Part 3: Determination of wear resistance -
Böhme22. ISO 29581-1:2009 Cement - Test methods - Part 1: Analysis by wet chemistry23. ISO 29581-2:2010 Cement - Test methods - Part 2: Chemical analysis by X-ray fluorescence24. ISO 29582-1:2009 Methods of testing cement - Determination of the heat of hydration - Part 1:
Solution method25. ISO 29582-2:2009 Methods of testing cement - Determination of the heat of hydration - Part 2:
Semi-adiabatic method26. ISO 679:2009 Cement - Test methods - Determination of strength27. ISO 863:2008 Cement - Test methods - Pozzolanicity test for pozzolanic cements28. ISO 9597:2008 Cement - Test methods - Determination of setting time and soundness29. ISO/TR 12389:2009 Methods of testing cement - Report of a test programme - Chemical analysis by
x-ray fluorescence30. ISO 10904:2011 Fibre-cement corrugated sheets and fittings for roofing and cladding31. ISO 22306:2007 Fibre-reinforced cement pipe, joints and fittings for gravity systems32. ISO 390:1993 Products in fibre-reinforced cement - Sampling and inspection33. ISO 8335:1987 Cement-bonded particleboards - Boards of Portland or equivalent cement
reinforced with fibrous wood particles34. ISO 8336:2009 Fibre-cement flat sheets - Product specification and test methods35. ISO 9125:2009 Fibre-cement slates and fittings - Product specification and test methods
Technical Committee No. 52“Safety of toys”, 4 standards
No. Standard number English title
1. ISO/IEC Guide 50:2014 Safety aspects - Guidelines for child safety in standards and other specifications2. EN 71-14:2014 Safety of toys - Part 14: Trampolines for domestic use3. EN 13782:2015 Temporary structure - Tents - Safety4. CEN/TR 16512:2015 Child use and care articles - Guidelines for the safety of children’s slings
1. EN ISO 11499:2014 Dentistry - Single-use cartridges for local anaesthetics (ISO 11499:2014)2. EN ISO 15841:2014 Dentistry - Wires for use in orthodontics (ISO 15841:2014)3. EN ISO 9680:2014 Dentistry - Operating lights (ISO 9680:2014)4. EN ISO 9687:2015 Dentistry - Graphical symbols for dental equipment (ISO 9687:2015)5. EN ISO 9173-3:2014 Dentistry - Extraction forceps - Part 3: Design (ISO 9173-3:2014)6. EN ISO 7494-2:2015 Dentistry - Dental units - Part 2: Air, water, suction and wastewater systems
(ISO 7494-2:2015)7. EN ISO 11499:2014 Dentistry - Single-use cartridges for local anaesthetics (ISO 11499:2014)8. EN ISO 24234:2015 Dentistry - Dental amalgam (ISO 24234:2015)9. EN ISO 16443:2014 Dentistry - Vocabulary for dental implants systems and related procedure (ISO
16443:2014)10. EN ISO 16635-2:2014 Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps11. EN ISO 17730:2014 Dentistry - Fluoride varnishes (ISO 17730:2014)12. EN ISO 15841:2014 Dentistry - Wires for use in orthodontics (ISO 15841:2014)13. EN ISO 13116:2014 Dentistry - Test Method for Determining Radio-Opacity of Materials (ISO
13116:2014)14. EN ISO 16635-1:2014 Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-
1:2013)
Technical Committee No. 67“Ceramic in building. Thermal insulating materials and products.
Refractory products and materials”, 25 standards
No. Standard number English title
1. EN 13165:2012+A1:2015 Thermal insulation products for buildings - Factory made rigid polyurethanefoam (PU) products - Specification
2. EN 13166:2012+A1:2015 Thermal insulation products for buildings - Factory made phenolic foam (PF)products - Specification
3. EN 13169:2012+A1:2015 Thermal insulation products for buildings - Factory made expanded perliteboard (EPB) products - Specification
4. EN 13171:2012+A1:2015 Thermal insulation products for buildings - Factory made wood fibre (WF)products - Specification
5. EN 13167:2012+A1:2015 Thermal insulation products for buildings - Factory made cellular glass (CG)products - Specification
6. EN 13168:2012+A1:2015 Thermal insulation products for buildings - Factory made wood wool (WW)products - Specification
7. EN 16069:2012+A1:2015 Thermal insulation products for buildings - Factory made products ofpolyethylene foam (PEF) - Specification
52
8. EN 13163:2012+A1:2015 Thermal insulation products for buildings - Factory made expandedpolystyrene (EPS) products - Specification
9. EN 13170:2012+A1:2015 Thermal insulation products for buildings - Factory made products ofexpanded cork (ICB) - Specification
10. EN 13162:2012+A1:2015 Thermal insulation products for buildings - Factory made mineral wool (MW)products - Specification
11. EN 13164:2012+A1:2015 Thermal insulation products for buildings - Factory made extruded polystyrenefoam (XPS) products - Specification
12. EN 16012:2012+A1:2015 Thermal insulation for buildings - Reflective insulation products -Determination of the declared thermal performance
13. EN 1013:2012+A1:2014 Light transmitting single skin profiled plastics sheets for internal and externalroofs, walls and ceilings - Requirements and test methods
14. EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal andexternal use in roofs, walls and ceilings - Requirements and test methods
15. ISO 17138:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanicalproperties of ceramic composites at room temperature - Determination offlexural strength
16. ISO 17139:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) -Thermophysical properties of ceramic composites - Determination of thermalexpansion
17. ISO 17140:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanicalproperties of ceramic composites at room temperature - Determination offatigue properties at constant amplitude
18. ISO 17142:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanicalproperties of ceramic composites at high temperature in air at atmosphericpressure - Determination of fatigue properties at constant amplitude
19. ISO 17161:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramiccomposites - Determination of the degree of misalignment in uniaxialmechanical tests
20. ISO 17162:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanicalproperties of monolithic ceramics at room temperature - Determination ofcompressive strength
21. ISO 17172:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) -Determination of compaction properties of ceramic powders
22. ISO 13007-2:2013 Ceramic tiles - Grouts and adhesives - Part 2: Test methods for adhesives23. ISO 13007-1:2014 Ceramic tiles - Grouts and adhesives - Part 1: Terms, definitions and
specifications for adhesives24. ISO 15686-1:2011 Buildings and constructed assets - Service life planning - Part 1: General
principles and framework25. ISO 15686-2:2012 Buildings and constructed assets - Service life planning - Part 2: Service life
prediction procedures
53
Technical Committee No. 74“Flanges and their joints”, 8 standards
No. Standard number English title
1. EN 16617:2015 Pipework - Corrugated metal hose assemblies for combustible gas -Performance requirements, testing and marking
2. EN ISO 6149-4:2014 Connections for fluid power and general use - Ports and stud ends with ISO 261metric threads and O-ring sealing - Part 4: Dimensions, design, test methodsand requirements for external hex and internal hex port plugs (ISO 6149-4:2006)
3. ISO 10300-1:2014 Calculation of load capacity of bevel gears - Part 1: Introduction and generalinfluence factors
4. ISO 10300-2:2014 Calculation of load capacity of bevel gears - Part 2: Calculation of surfacedurability (pitting)
5. ISO 10300-3:2014 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth rootstrength
6. ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears -Part 1: Introduction and basic principles
7. ISO/TR 15144-2:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears -Part 2: Examples of calculation for micropitting
8. ISO 14104:2014 Gears - Surface temper etch inspection after grinding, chemical method
Technical Committee No. 104“Concrete and related products. Automation and management in
construction”, 6 standards
No. Standard number English title
1. EN 934-6:2001 Admixtures for concrete, mortar and grout - Part 6: Sampling, conformitycontrol and evaluation of conformity
2. EN 480-13:2015 Admixtures for concrete, mortar and grout - Test methods - Part 13: Referencemasonry mortar for testing mortar admixtures
3. EN 12794:2005+A1:2007 Precast concrete products - Foundation piles4. EN 14908-6:2014 Open Data Communication in Building Automation, Controls and Building
Management - Control Network Protocol - Part 6: Application elements5. EN ISO 10591:2005 Building construction - Sealants - Determination of adhesion/cohesion
properties of sealants after immersion in water (ISO 10591:2005)6. EN ISO 11432:2005 Building construction - Sealants - Determination of resistance to compression
(ISO 11432:2005)
54
Technical Committee No. 114“Safety of machinery and fire safety”, 25 standards
No. Standard number English title
1. EN ISO 25745-2:2015 Energy performance of lifts, escalators and moving walks - Part 2: Energycalculation and classification for lifts (elevators) (ISO 25745-2:2015)
2. EN ISO 25745-3:2015 Energy performance of lifts, escalators and moving walks - Part 3: Energycalculation and classification of escalators and moving walks (ISO 25745-3:2015)
3. EN 81-72:2015 Safety rules for the construction and installation of lifts - Particular applicationsfor passenger and goods passenger lifts - Part 72: Firefighters lifts
4. EN 54-31:2014 Fire detection and fire alarm system - Part 31: Multi-sensor fire detectors - Pointdetectors using a comb. of smoke, carbon monoxide and optionally heat sensors
5. EN 54-30:2015 Fire detection and fire alarm systems - Part 30: Multi-sensor fire detectors -Point detectors using a combination of carbon monoxide and heat sensors
6. EN 54-27:2015 Fire detection and fire alarms systems - Part 27: Duct smoke detectors7. EN 54-12:2015 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors
using an optical beam8. EN 54-26:2015 Fire detection and fire alarm systems - Part 26: Carbon monoxide detectors -
Point detectors9. EN 54-29:2015 Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors -
Point detectors using a combination of smoke and heat sensors10. EN 1808:2015 Safety requirements for suspended access equipment - Design calculations,
stability criteria, construction - Examinations and tests11. EN 13381-3:2015 Test methods for determining the contribution to the fire resistance of
structural members - Part 3: Applied protection to concrete members12. EN 15882-2:2015 Extended application of results from fire resistance tests for service installations
- Part 2: Fire dampers13. EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015)14. EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements15. EN 1417:2014 Plastics and rubber machines - Two-roll mills - Safety requirements16. EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements17. EN 16564:2014 Machines and plants for mining and tooling of natural stone - Safety -
Requirements for bridge type sawing/milling machines, included numericalcontrol (NC/CNC) versions
18. EN 15059:2009+A1:2015 Snow grooming equipment - Safety requirements19. EN 15467:2014 Food processing machinery - Fish heading and filleting machines - Safety and
hygiene requirements20. EN ISO 23771:2015 Textile machinery - Guide to the design of textile machinery for reduction of
the noise emissions (ISO 23771:2015)21. EN 13243:2015 Safety requirements for cableway installations designed to carry persons -
Electrical equipment other than for drive systems22. EN 12930:2015 Safety require. for cableway installations design. to carry persons - Calculations23. EN 12929-2:2015 Safety requirements for cableway installations designed to carry persons -
General requirements - Part 2: Additional requirements for reversible bicableaerial ropeways without carrier truck brakes
55
24. EN 12929-1:2015 Safety requirements for cableway installations designed to carry persons -General requirements - Part 1: Requirements for all installations
25. EN 14462:2015 Surface treatment equipment - Noise test code for surface treatment equipmentincluding its ancillary handling equipment - Accuracy grades 2 and 3
Technical Committee No. 129“Glass”, 2 standards
No. Standard number English title
1. EN 15752-1:2014 Glass in building - Adhesive backed polymeric film - Part 1: Definitions andrequirements
2. ISO 9885:1991 Wide-mouth glass containers - Deviation from flatness of top sealing surface -Test methods
Technical Committee No. 133“Metals and their alloys”, 49 standards
No. Standard number English title
1. EN ISO 18278-1:2015 Resistance welding - Weldability - Part 1: General requirements for theevaluation of weldability for resistance spot, seam and projection welding ofmetallic materials (ISO 18278-1:2015)
2. EN ISO 2503:2009/A1:2015 Gas welding equipment - Pressure regulators and pressure regulators withflow-metering devices for gas cylinders used in welding, cutting and alliedprocesses up to 300 bar (30 MPa) (ISO 2503:2009/Amd 1:2015)
3. EN ISO 5172:2006/A2:2015 Gas welding equipment - Blowpipes for gas welding, heating and cutting -Specifications and tests (ISO 5172:2006/Amd 2:2015)
4. EN ISO 7291:2010/A1:2015 Gas welding equipment - Pressure regulators for manifold systems used inwelding, cutting and allied processes up to 30 MPa (300 bar)
5. EN ISO 10447:2015 Resistance welding - Testing of welds - Peel and chisel testing of resistance spotand projection welds (ISO 10447:2015)
6. EN ISO 14323:2015 Resistance welding - Destructive testing of welds - Specimen dimensions andprocedure for impact tensile shear test and cross-tension testing of resistancespot and embossed projection welds (ISO 14323:2015)
7. EN ISO 14373:2015 Resistance welding - Procedure for spot welding of uncoated and coated lowcarbon steels (ISO 14373:2015)
8. EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels9. EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels10. CEN ISO/TR 14745:2015 Welding - Post-weld heat treatment parameters for steels (ISO/TR 14745:2015)11. EN ISO 17658:2015 Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts
- Terminology (ISO 17658:2002)12. EN 1559-4:2015 Founding - Technical conditions of delivery - Part 4: Additional requirements
for aluminium alloy castings
56
13. EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for generalapplications - Specifications
14. CEN/TR 16748:2014 Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys forhigh pressure, low pressure and gravity die casting
15. EN 15703-2:2014 Copper and copper alloys - Determination of manganese content - Part 2: Flameatomic absorption spectrometric method (FAAS)
16. EN 15063-1:2014 Copper and copper alloys - Determination of main constituents and impuritiesby wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1:Guidelines to the routine method
17. CEN/TS 15656:2015 Copper and copper alloys - Determination of phosphorus content -Spectrophotometric method
18. EN 1371-2:2015 Founding - Liquid penetrant testing - Part 2: Investment castings19. EN ISO 7441:2015 Corrosion of metals and alloys - Determination of bimetallic corrosion in
atmospheric exposure corrosion tests (ISO 7441:2015)20. EN ISO 4528:2015 Vitreous and porcelain enamel finishes - Guide to selection of test methods for
vitreous and porcelain enamelled areas of articles (ISO 4528:2015)21. EN ISO 7539-11:2014 Corrosion of metals and alloys - Stress corrosion testing - Part 11: Guidelines for
testing the resistance of metals and alloys to hydrogen embrittlement andhydrogen-assisted cracking (ISO 7539-11:2013)
22. EN ISO 7539-10:2014 Corrosion of metals and alloys - Stress corrosion testing - Part 10: Reverse U-bend method (ISO 7539-10:2013)
23. EN 10027-2:2015 Designation systems for steels - Part 2: Numerical system24. EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature
(ISO 6892-3:2015)25. EN ISO 6508-1:2015 Metallic materials - Rockwell hardness test - Part 1: Test method26. EN ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration
of testing machines and indenters (ISO 6508-2:2015)27. EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibr. of reference blocks28. EN 10293:2015 Steel castings - Steel castings for general engineering uses29. ISO 22034-1:2007 Steel wire and wire products - Part 1: General test methods30. ISO 22034-2:2007 Steel wire and wire products - Part 2: Tolerances on wire dimensions31. ISO 13270:2013 Steel fibres for concrete - Definitions and specifications32. ISO 7989-1:2006 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part
1: General principles33. ISO 7989-2:2007 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part
2: Zinc or zinc-alloy coating34. ISO 404:2013 Steel and steel products - General technical delivery requirements35. ISO 10474:2013 Steel and steel products - Inspection documents36. ISO 6361-1:2011 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 1:
Technical conditions for inspection and delivery37. ISO 6361-2:2014 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2:
Mechanical properties38. ISO 6361-3:2014 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 3:
Strips: Tolerances on shape and dimensions39. ISO 6361-4:2014 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 4:
Sheets and plates: Tolerances on shape and dimensions
57
40. ISO 6361-5:2011 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 5:Chemical composition
41. ISO 6362-1:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 1: Technical conditions for inspection and delivery
42. ISO 6362-2:2014 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 2: Mechanical properties
43. ISO 6362-3:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 3: Extruded rectangular bars - Tolerances on shape anddimensions
44. ISO 6362-4:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 4: Profiles - Tolerances on shape and dimensions
45. ISO 6362-5:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 5: Round, square and hexagonal bars - Tolerances on shape anddimensions
46. ISO 6362-6:2012 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 6: Round, square, rectangular and hexagonal tubes - Toleranceson shape and dimensions
47. ISO 6362-7:2014 Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes andprofiles - Part 7: Chemical composition
48. ISO 251:2012 Conveyor belts with textile carcass - Widths and lengths49. ISO 18573:2012 Conveyor belts - Test atmospheres and conditioning periods
Technical Committee No. 136“Sports, playground and other recreational equipment”, 48 standards
No. Standard number English title
1. EN 12229:2014 Surfaces for sports areas - Procedure for the preparation of synthetic turf andneedle-punch test pieces
2. EN 13451-10:2014 Swimming pool equipment - Part 10: Additional specific safety requirementsand test methods for diving platforms, diving springboards and associatedequipment
3. EN 13451-11:2014 Swimming pool equipment - Part 11: Additional specific safety requirementsand test methods for moveable pool floors and moveable bulkheads
4. EN 13451-4:2014 Swimming pool equipment - Part 4: Additional specific safety requirementsand test methods for starting platforms
5. EN 13451-5:2014 Swimming pool equipment - Part 5: Additional specific safety requirementsand test methods for lane lines and dividing line
6. EN ISO 4210-1:2014 Cycles - Safety requirements for bicycles - Part 1: Terms and definitions (ISO4210-1:2014)
7. EN ISO 4210-2:2014 Cycles - Safety requirements for bicycles - Part 2: Requirements for city andtrekking, young adult, mountain and racing bicycles (ISO 4210-2:2014)
8. EN ISO 4210-3:2014 Cycles - Safety requirements for bicycles - Part 3: Common test methods9. EN ISO 4210-4:2014 Cycles - Safety requirements for bicycles - Part 4: Braking test methods (ISO
4210-4:2014)
58
10. EN ISO 4210-5:2014 Cycles - Safety requirements for bicycles - Part 5: Steering test methods (ISO4210-5:2014, Corrected version 2015-02-01)
11. EN ISO 4210-6:2014 Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods(ISO 4210-6:2014)
12. EN ISO 4210-7:2014 Cycles - Safety requirements for bicycles - Part 7: Wheels and rims test methods(ISO 4210-7:2014)
13. EN ISO 4210-8:2014 Cycles - Safety requirements for bicycles - Part 8: Pedal and drive system testmethods (ISO 4210-8:2014)
14. EN ISO 4210-9:2014 Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post testmethods (ISO 4210-9:2014)
15. EN ISO 8098:2014 Cycles - Safety requirements for bicycles for young children (ISO 8098:2014)16. EN 15306:2014 Surfaces for outdoor sports areas - Exposure of synthetic turf to simulated wear17. EN 1809:2014 Diving equipment - Buoyancy compensators - Functional and safety
requirements, test methods18. EN 564:2014 Mountaineering equipment - Accessory cord - Safety requirements & test meth19. EN 14468-1:2015 Table tennis - Part 1: Table tennis tables, functional and safety requirements,
test methods20. EN 14468-2:2015 Table tennis - Part 2: Posts for net assemblies - Requirements and test methods21. EN 1176-11:2014 Playground equipment and surfacing - Part 11: Additional specific safety
requirements and test methods for spatial network22. ISO 9838:2008 Alpine and touring ski-bindings - Test soles for ski-binding tests23. ISO 9523:2008 Touring ski-boots for adults - Interface with touring ski-bindings -
Requirements and test methods24. ISO 9465:2012 Alpine ski-bindings - Lateral release under impact loading - Test method25. ISO 9462:2014 Alpine ski-bindings - Requirements and test methods26. ISO 8364:2007 Alpine skis and bindings - Binding mounting area - Requirements and test
methods27. ISO 8061:2004 Alpine ski-bindings - Selection of release torque values28. ISO 7795:2011 Cross-country skis - Ski-bindingscrews - Test methods29. ISO 7794:2011 Cross-country skis - Ski-binding screws - Requirements30. ISO 7331:2011 Ski-poles for alpine skiing - Requirements and test methods31. ISO 6266:2013 Alpine skis - Determination of fatigue indexes -Cyclic loading test32. ISO 6265:2013 Alpine skis - Determination of deformation load and breaking load33. ISO 5902:2013 Alpine skis - Determination of elastic properties34. ISO 11087:2004 Alpine ski-bindings - Retention devices - Requirements and test methods35. ISO 10958-2:2004 Snowboards - Binding mounting area - Part 2: Requirements and test methods
for snowboards with inserts36. ISO 10228:2011 Cross-country skis - Binding mounting area - Requirements for test screws37. CEN/TR 16598:2014 Collection of rationales for EN 1176 - Requirements38. EN 14619:2015 Roller sports equipment - Kick scooters - Safety requirements and test methods39. EN 16630:2015 Permanently installed outdoor fitness equipment - Safety requirements and test
methods40. EN 957-6:2010+A1:2014 Stationary training equipment - Part 6: Treadmills, additional specific safety
requirements and test methods41. EN 13089:2011+A1:2015 Mountaineering equipment - Ice-tools - Safety requirements and test methods42. CEN/TS 16717:2015 Surface for sports areas - Method of test for the determination of shock
59
absorption, vertical deformation and energy restitution using the advancedartificial athlete
43. EN 13200-7:2014 Spectator facilities - Part 7: Entry and exit elements and routes44. EN 16581:2014 Conservation of Cultural Heritage - Surface protection for porous inorganic
materials - Laboratory test methods for the evaluation of the performance ofwater repellent products
45. CEN/TS 16163:2014 Conservation of Cultural Heritage - Guidelines and procedures for choosingappropriate lighting for indoor exhibitions
46. EN 16455:2014 Conservation of cultural heritage - Extraction and determination of soluble saltsin natural stone and related materials used in and from cultural heritage
47. EN 16515:2015 Conservation of Cultural Heritage - Guidelines to characterize natural stoneused in cultural heritage
48. EN 15999-1:2014 Conservation of cultural heritage - Guidelines for design of showcases forexhibition and preservation of objects - Part 1: General requirements
1. EN ISO 16946:2015 Non-destructive testing - Ultrasonic testing - Specification for step wedgecalibration block (ISO 16946:2015)
2. EN 1330-1:2014 Non destructive testing - Terminology - Part 1: List of general terms3. ISO 18490:2015 Non-destructive testing - Evaluation of vision acuity of NDT personnel4. ISO 10878:2013 Non-destructive testing - Infrared thermography - Vocabulary5. ISO 18249:2015 Non-destructive testing - Acoustic emission testing - Specific methodology and
general evaluation criteria for testing of fibre-reinforced polymers6. ISO 12715:2014 Non-destructive testing - Ultrasonic testing - Reference blocks and test
procedures for the characterization of contact probe sound beams
Technical Committee No. 140“In vitro diagnostic medical device”, 1 standard
No. Standard number English title
7. ISO 15189:2012 Medical laboratories - Requirements for quality and competence
60
Technical Committee No. 144“Tractors and machinery for agriculture and forestry”, 5 standards
No. Standard number English title
1. EN ISO 16119-4:2014 Agricultural and forestry machinery - Environmental requirements for sprayers- Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)
2. EN ISO 16122-4:2015 Agricultural and forestry machines - Inspection of sprayers in use - Part 4:Fixed and semi-mobile sprayers (ISO 16122-4:2015)
3. EN ISO 16122-3:2015 Agricultural and forestry machinery - Inspection of sprayers in use - Part 3:Sprayers for bush and tree crops (ISO 16122-3:2015)
4. EN ISO 16122-2:2015 Agricultural and forestry machinery - Inspection of sprayers in use - Part 2:Horizontal boom sprayers (ISO 16122-2:2015)
5. EN ISO 16122-1:2015 Agricultural and forestry machinery - Inspection of sprayers in use - Part 1:General (ISO 16122-1:2015)
Technical Committee No. 172“Pulp, paper and board”, 46 standards
No. Standard number English title
1. EN ISO 12625-16:2015 Tissue paper and tissue products - Part 16: Determination of optical properties -Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)
2. EN ISO 12625-15:2015 Tissue paper and tissue products - Part 15: Determination of optical properties -Measurement of brightness and colour with C/2° (indoor daylight) illuminant
3. EN ISO 12625-9:2015 Tissue paper and tissue products - Part 9: Determination of ball burst strength(ISO 12625-9:2015)
4. ISO 10716:1994 Paper and board - Determination of alkali reserve5. ISO 11476:2010 Paper and board - Determination of CIE whiteness, C/2 degrees (indoor
illumination conditions)6. ISO 11480:1997 Pulp, paper and board - Determination of total chlorine and organically bound
chlorine7. ISO 13542:2006 Paper and board - Specification for internal diameters of cores for reels8. ISO 14436:2010 Pulps - Standard tap water for drainability measurements - Conductivity 40
mS/m to 150 mS/m9. ISO 14487:1997 Pulps - Standard water for physical testing10. ISO 15360-1:2000 Recycled pulps - Estimation of Stickies and Plastics - Part 1: Visual method11. ISO 15360-2:2001 Recycled pulps - Estimation of Stickies and Plastics - Part 2: Image analysis
method12. ISO 15360-2:2001/Cor 1:2007 Recycled pulps - Estimation of Stickies and Plastics - Part 2: Image analysis
method13. ISO 15361:2000 Pulps - Determination of zero-span tensile strength, wet or dry14. ISO 1762 Paper, board and pulps - Determination of residue (ash) on ignition at 525
degrees C
61
15. ISO 17812:2007 Paper, board and pulps - Determination of total magnesium, total calcium, totalmanganese, total iron and total copper
16. ISO 2144:2015 Paper, board and pulps - Determination of residue (ash) on ignition at 900degrees C
17. ISO 22754:2008 Pulp and paper - Determination of the effective residual ink concentration(ERIC number) by infrared reflectance measurement
18. ISO 23713:2005 Pulps - Determination of fibre coarseness by automated optical analysis -Polarized light method
19. ISO 2469:2014 Paper, board and pulps - Measurement of diffuse radiance factor (diffusereflectance factor)
20. ISO 2471:2008 Paper and board - Determination of opacity (paper backing) - Diffusereflectance method
21. ISO 3260:2015 Pulps - Determination of chlorine consumption (Degree of delignification)22. ISO 3688:1999 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue
reflectance factor (ISO brightness)23. ISO 5264-1:1979 Pulps - Laboratory beating - Part 1: Valley beater method24. ISO 5631-2:2014 Paper and board - Determination of colour by diffuse reflectance - Part 2:
Outdoor daylight conditions (D65/10 degrees)25. ISO 5631-3:2014 Paper and board - Determination of colour by diffuse reflectance - Part 3:
Indoor illumination conditions (D50/2 degrees)26. ISO 5647:1990 Paper and board - Determination of titanium dioxide content27. ISO 6587:1992 Paper, board and pulps - Determination of conductivity of aqueous extracts28. ISO 6588-1:2012 Paper, board and pulps - Determination of pH of aqueous extracts - Part 1: Cold
extraction29. ISO 6588-2:2012 Paper, board and pulps - Determination of pH of aqueous extracts - Part 2: Hot
extraction30. ISO 699:2015 Pulps - Determination of alkali resistance31. ISO 8254-3:2004 Paper and board - Measurement of specular gloss - Part 3: 20 degree gloss with
a converging beam, TAPPI method32. ISO 838:1974 Paper - Holes for general filing purposes - Specifications33. ISO 9184-1:1990 Paper, board and pulps - Fibre furnish analysis - Part 1: General method34. ISO 9184-2:1990 Paper, board and pulps - Fibre furnish analysis - Part 2: Staining guide35. ISO 9184-3:1990 Paper, board and pulps - Fibre furnish analysis - Part 3: Herzberg staining test36. ISO 9184-4:1990 Paper, board and pulps - Fibre furnish analysis - Part 4: Graff "C" staining test37. ISO 9184-5:1990 Paper, board and pulps - Fibre furnish analysis - Part 5: Lofton-Merritt staining
test (modification of Wisbar)38. ISO 9184-6:1994 Paper, board and pulps - Fibre furnish analysis - Part 6: Determination of fibre
coarseness39. ISO 9184-7:1994 Paper, board and pulps - Fibre furnish analysis - Part 7: Determination of
weight factor40. ISO 9197:2006 Paper, board and pulps - Determination of water-soluble chlorides41. ISO 12776:2008 Pallets - Slip sheets42. ISO 13194:2011 Box pallets - Principal requirements and test methods43. ISO 15629:2002 Pallets for materials handling - Quality of fasteners for assembly of new and
repair of used, flat, wooden pallets44. ISO 18333:2014 Pallets for materials handling - Quality of new wooden comp. for flat pallets
62
45. ISO 18334:2010 Pallets for materials handling - Quality of assembly of new wooden pallets46. ISO 6780:2003 Flat pallets for intercontinental materials handling - Principal dimensions and
tolerances
Technical Committee No. 175“Round and sawn timber”, 17 standards
No. Standard number English title
1. CEN/TR 16816:2015 End use performance of wood products - Utilisation and improvement ofexisting methods to estimate service life
2. CEN/TS 12404:2015 Durability of wood and wood-based products - Assessment of the effectivenessof a masonry fungicide to prevent growth into wood of Dry Rot Serpulalacrymans (Schumacher ex Fries) S.F. Gray - Laboratory method
3. CEN/TR 12872:2014 Wood-based panels - Guidance on the use of load-bearing boards in floors,walls and roofs
4. EN 636:2012+A1:2015 Plywood - Specifications5. EN 13986:2004+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of
conformity and marking6. EN 1075:2014 Timber structures - Test methods - Joints made with punched metal plate
fasteners7. EN 1870-17:2012+A1:2015 Safety of woodworking machines - Circular sawing machines - Part 17: Manual
horizontal cutting cross-cut sawing machines with one saw unit (radial armsaws)
8. EN 12023:1996 Self-adhesive tapes - Measurement of water transmission in a warm humidatmosphere
9. EN 15307:2014 Adhesives for leather and footwear materials - Sole-upper bonds - Minimumstrength requirements
10. EN 1373:2015 Adhesives - Test method for adhesives for floor and wall coverings - Shear test11. EN 1372:2015 Adhesives - Test method for adhesives for floor and wall coverings - Peel test12. EN 15275:2015 Structural adhesives - Characterisation of anaerobic adhesives for co-axial
metallic assembly in building and civil engineering structures13. EN 1902:2015 Adhesives - Test method for adhesives for floor and wall coverings - Shear
creep test14. EN 1903:2015 Adhesives - Test method for adhesives for plastic or rubber floor coverings or
wall coverings - Determination of dimensional changes after accelerated ageing15. EN 15274:2015 General purpose adhesives for structural assembly - Requirements and test
methods16. CR 1472:1997 General guidance for the marking of gas appliances17. CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the
method of evacuation of the combustion products (types)
63
Technical Committee No. 185“Fasteners, screws and auxiliary elements”, 5 standards
No. Standard number English title
1. EN 14399-1:2015 High-strength structural bolting assemblies for preloading - Part 1: Generalrequirements
2. ISO 888:2012 Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths3. ISO 1891:2009 Fasteners - Terminology4. ISO/TR 16224:2012 Technical aspects of nut design5. ISO 10509:2012 Hexagon flange head tapping screws
Technical Committee No. 205“Non-active medical devices”, 8 standards
No. Standard number English title
1. EN ISO 11608-1:2015 Needle-based injection systems for medical use - Requirements and testmethods - Part 1: Needle-based injection systems (ISO 11608-1:2014)
2. EN ISO 11070:2014 Sterile single-use intravascular introducers, dilators and guidewires (ISO11070:2014)
3. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physicalproperties
4. EN 455-3:2015 Medical gloves for single use - Part 3: Requirements and testing for biologicalevaluation
5. EN ISO 7199:2014 Cardiovascular implants and artificial organs - Blood-gas exchangers(oxygenators) (ISO 7199:2009 + Amd 1:2012)
6. EN ISO 8871-2:2004/A1:2014 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part2: Identification and characterization - Amendment 1 (ISO 8871-2:2003/Amd1:2005)
7. EN ISO 8871-5:2014 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part5: Functional requirements and testing (ISO 8871-5:2005)
8. EN ISO 7439:2015 Copper-bearing contraceptive intrauterine devices - Requirements and tests(ISO 7439:2015)
64
Technical Committee No. 206“Biocompatibility of medical and dental materials and devices”,
12 standards
No. Standard number English title
1. EN 13060:2014 Small steam sterilizers2. EN 14180:2014 Sterilizers for medical purposes - Low temperature steam and formaldehyde
sterilizers - Requirements and testing3. EN ISO 11140-1:2014 Sterilization of health care products - Chemical indicators - Part 1: General
requirements (ISO 11140-1:2014)4. EN ISO 10993-3:2014 Biological evaluation of medical devices - Part 3: Tests for genotoxicity,
carcinogenicity and reproductive toxicity (ISO 10993-3:2014)5. EN 13718-2:2015 Medical vehicles and their equipment - Air ambulances - Part 2: Operational
and technical requirements for air ambulances6. EN 14180:2014 Sterilizers for medical purposes - Low temperature steam and formaldehyde
sterilizers - Requirements and testing7. EN 1865-2:2010+A1:2015 Patient handling equipment used in road ambulances - Part 2: Power assisted
stretcher8. EN 1865-3:2012+A1:2015 Patient handling equipment used in road ambulances - Part 3: Heavy duty
stretcher9. EN 16442:2015 Controlled environment storage cabinet for processed thermolabile endoscopes10. EN ISO 11607-1:2009/A1:2014 Packaging for terminally sterilized medical devices - Part 1: Requirements for
materials, sterile barrier systems and packaging systems (ISO 11607-1:2006/Amd 1:2014)
11. EN ISO 11607-2:2006/A1:2014 Packaging for terminally sterilized medical devices - Part 2: Validationrequirements for forming, sealing and assembly processes (ISO 11607-2:2006/Amd 1:2014)
12. EN ISO 15883-1:2009/A1:2014 Washer-disinfectors - Part 1: General requirements, terms and definitions andtests (ISO 15883-1:2006/Amd 1:2014)
1. ISO 362-1:2015 Measurement of noise emitted by accelerating road vehicles - Engineeringmethod - Part 1: M and N categories
2. ISO 17534-1:2015 Acoustics - Software for the calculation of sound outdoors - Part 1: Qualityrequirements and quality assurance
3. ISO/TR 17534-2:2014 Acoustics - Software for the calculation of sound outdoors - Part 2: Generalrecommendations for test cases and quality assurance interface
4. ISO/TR 17534-3:2015 Acoustics - Software for the calculation of sound outdoors - Part 3:Recommendations for quality assured implementation of ISO 9613-2 in
65
software according to ISO 17534-15. ISO 12999-1:2014 Acoustics - Determination and application of measurement uncertainties in
building acoustics - Part 1: Sound insulation6. ISO 1683:2015 Acoustics - Preferred reference values for acoustical and vibratory levels7. ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET
method8. ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test
conditions
Technical Committee No. 215“Respiratory and anaesthetic equipment”, 8 standards
No. Standard number English title
1. EN ISO 5367:2014 Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO5367:2014)
2. EN ISO 5356-1:2015 Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones andsockets (ISO 5356-1:2015)
3. EN ISO 5359:2014 Anaesthetic and respiratory equipment - Low-pressure hose assemblies for usewith medical gases (ISO 5359:2014)
4. EN ISO 80601-2-69:2014 Medical electrical equipment - Part 2-69: Particular requirements for basicsafety and essential performance of oxygen concentrator equipment
5. EN ISO 8836:2014 Suction catheters for use in the respiratory tract (ISO 8836:2014)6. EN ISO 18082:2014 Anaesthetic and respiratory equipment - Dimensions of non-interchangeable
screw-threaded (NIST) low-pressure connectors for medical gases7. EN ISO 11990-1:2014 Lasers and laser-related equipment - Determination of laser resistance of
tracheal tubes - Part 1: Tracheal tube shaft (ISO 11990-1:2011)8. EN ISO 11990-2:2014 Lasers and laser-related equipment - Determination of laser resistance of
tracheal tubes - Part 2: Tracheal tube cuffs (ISO 11990-2:2010)
Technical Committee No. 218“Rubber and plastics hoses and piping”, 61 standards
No. Standard number English title
1. EN ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014)2. EN 13765:2010+A1:2015 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the
transfer of hydrocarbons, solvents and chemicals - Specification3. ISO 4647:2010 Rubber, vulcanized - Determinat. of static adhesion to textile cord - H-pull test4. ISO 3303-1:2012 Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1:
Steel-ball method5. ISO 3303-2:2012 Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 2:
Hydraulic method
66
6. EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced -Specification (ISO 8029:2014)
7. ISO 2951:2012 Rubber, vulcanized or thermoplastic - Determination of insulation resistance8. ISO 2921:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test)9. ISO 2878:2011 Rubber, vulcanized or thermoplastic - Antistatic and conductive products -
Determination of electrical resistance10. ISO 2782-1:2012 Rubber, vulcanized or thermoplastic - Determination of permeability to gases -
Part 1: Differential-pressure methods11. ISO 2782-2:2012 Rubber, vulcanized or thermoplastic - Determination of permeability to gases -
Part 2: Equal-pressure method12. ISO 2302:2014 Isobutene-isoprene rubber (IIR) - Evaluation procedure13. ISO 2000:2014 Rubber, raw natural - Guidelines for the specification of technically specified
rubber (TSR)14. ISO 976:2013 Rubber/ plastics - Polymer dispersions and rubber latices - Determination of pH15. ISO 815-1:2014 Rubber, vulcanized or thermoplastic -Determination of compression set - Part 1:
At ambient or elevated temperatures16. ISO 815-2:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part
2: At low temperatures17. ISO 814:2011 Rubber, vulcanized or thermoplastic - Determination of adhesion to metal -
Two-plate method18. ISO 813:2010 Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid
substrate - 90 degree peel method19. ISO 706:2004 Rubber latex - Determination of coagulum content (sieve residue)20. ISO 35:2004 Natural rubber latex concentrate - Determination of mechanical stability21. ISO 2930:2009 Rubber, raw natural - Determination of plasticity retention index (PRI)22. ISO 249:2014 Rubber, raw natural - Determination of dirt content23. ISO 248-1:2011 Rubber, raw - Determination of volatile-matter content - Part 1: Hot-mill
method and oven method24. ISO 248-2:2012 Rubber, raw -Determination of volatile-matter content - Part 2:
Thermogravimetric methods using an automatic analyser with an infrareddrying unit
25. ISO 2476:2014 Butadiene rubber (BR) - Solution-polymerized types - Evaluation procedures26. ISO 2475:2011 Chloroprene rubber (CR) - General-purpose types - Evaluation procedure27. ISO 2393:2014 Rubber test mixes - Preparation, mixing and vulcanization - Equipment and
procedures28. ISO 2322:2014 Styrene-butadiene rubber (SBR) - Emulsion- and solution-polymerized types -
Evaluation procedures30. ISO 2285:2013 Rubber, vulcanized or thermoplastic - Determination of tension set under
constant elongation, and of tension set, elongation and creep under constanttensile load
31. ISO 2230:2002 Rubber products - Guidelines for storage32. ISO 2007:2007 Rubber, unvulcanized - Determination of plasticity - Rapid-plastimeter method33. ISO 2005:2014 Rubber latex, natural, concentrate - Determination of sludge content34. ISO 2004:2010 Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved
67
types - Specifications35. ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic -
Measurement of resistivity36. ISO 1827:2011 Rubber, vulcanized or thermoplastic - Determination of shear modulus and
adhesion to rigid plates - Quadruple-shear methods37. ISO 1817:2015 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids38. ISO 1795:2007 Rubber, raw natural and raw synthetic - Sampling and further preparative
procedures39. ISO 1656:2014 Rubber, raw natural, and rubber latex, natural - Determ. of nitrogen content40. ISO 1652:2011 Rubber latex - Determination of apparent viscosity by the Brookfield test
method41. ISO 1432:2013 Rubber, vulcanized or thermoplastic - Determination of low-temperature
stiffening (Gehman test)42. ISO 1431-1:2012 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1:
Static and dynamic strain testing43. ISO 1409:2006 Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic)
- Determination of surface tension by the ring method44. ISO 1407:2011 Rubber - Determination of solvent extract45. ISO 127:2012 Rubber, natural latex concentrate - Determination of KOH number46. ISO 126:2005 Natural rubber latex concentrate - Determination of dry rubber content47. ISO 13756:2015 Jewellery - Determination of silver in silver jewellery alloys - Volumetric
(potentiometric) method using sodium chloride or potassium chloride48. ISO 125:2011 Natural rubber latex concentrate - Determination of alkalinity49. ISO 124:2014 Latex, rubber - Determination of total solids content50. EN ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of
petroleum liquids - Specification (ISO 6808:2014)51. EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type -
Specification52. EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type -
Specification53. EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced
hydraulic type - Specification54. EN 857:2015 Rubber hoses and hose assemblies - Wire braid reinforced compact type for
hydraulic applications - Specification55. CEN/TS 16650:2014 Specification for hose couplings for petrol, oil and lubricants - High pressure
couplings56. EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for
suction and discharge of aqueous materials - Specification (ISO 3994:2014)57. EN ISO 8331:2014 Rubber and plastics hoses and hose assemblies - Guidelines for selection,
storage, use and maintenance (ISO 8331:2014)58. EN ISO 8030:2014 Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)59. EN ISO 3949:2014 Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic
applications - Specification (ISO 3949:2009)60. EN ISO 6806:2014 Rubber hoses and hose assemblies for use in oil burners - Specification61. EN ISO 28017:2011/A1:2015 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging
applications - Specification - Amendment 1 (ISO 28017:2011/Amd 1:2015)
1. EN 419212-1:2014 Application Interface for smart cards used as Secure Signature Creation Devices- Part 1: Basic services
2. EN 419212-2:2014 Application Interface for smart cards used as Secure Signature Creation Devices- Part 2: Additional services
3. EN 1545-1:2015 Identification card systems - Surface transport applications - Part 1: Elementarydata types, general code lists and general data elements
4. EN 1545-2:2015 Identification card systems - Surface transport applications - Part 2: Transportand travel payment related data elements and code lists
5. CEN/TS 419261:2015 Security require.for trustworthy systems managing certificates and time-stamps6. CEN ISO/TR 17424:2015 Intelligent transport systems - Cooperative systems - State of the art of Local
Dynamic Maps concepts (ISO/TR 17424:2015)7. CEN ISO/TS 18234-9:2013 Intelligent transport systems - Traffic and travel information via transport
protocol experts group, generation 1 (TPEG1) binary data format - Part 9:Traffic event compact (TPEG1-TEC) (ISO/TS 18234-9:2013)
8. CEN/TS 16702-2:2015 Electronic fee collection - Secure monitoring for autonomous toll systems - Part2: Trusted recorder
9. CEN ISO/TS 18750:2015 Intelligent transport systems - Cooperative systems - Definition of a globalconcept for Local Dynamic Maps (ISO/TS 18750:2015)
10. CEN ISO/TS 19321:2015 Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicleinformation (IVI) data structure (ISO/TS 19321:2015)
11. CEN/TS 16794-1:2015 Public transport - Communication between contactless readers and fare media -Part 1: Implementation requirements for ISO/IEC 14443
12. CEN/TS 16794-2:2015 Public transport - Communication between contactless readers and fare media -Part 2: Test plan for ISO/IEC 14443
13. EN 16072:2015 Intelligent transport systems - ESafety - Pan-European eCall operatingrequirements
14. EN 15722:2015 Intelligent transport systems - ESafety - ECall minimum set of data15. EN 16062:2015 Intelligent transport systems - ESafety - eCall high level application
requirements (HLAP) using GSM/UMTS circuit switched networks16. ISO 10159:2011 Health informatics - Messages & comm.. - Web access reference manifest17. ISO 11073-90101:2008 Health informatics - Point-of-care medical device communication - Part 90101:
Analytical instruments - Point-of-care test18. ISO 11073-91064:2009 Health informatics - Standard communication protocol - Part 91064: Computer-
assisted electrocardiography19. ISO 17090-1:2013 Health informatics - Public key infrastructure - Part 1: Overview of digital
certificate services20. ISO 17090-2:2008 Health informatics - Public key infrastructure - Part 2: Certificate profile21. ISO 17090-3:2008 Health informatics - Public key infrastructure - Part 3: Policy management of
certification authority22. ISO 17090-4:2014 Health informatics - Public key infrastructure - Part 4: Digital Signatures for
healthcare documents
69
23. ISO 17115:2007 Health informatics - Vocabulary for terminological systems24. ISO 17432:2004 Health informatics - Messages and communication - Web access to DICOM
persistent objects25. ISO 18232:2006 Health Informatics - Messages and communication - Format of length limited
globally unique string identifiers26. ISO 18308:2011 Health informatics - Requirements for an electronic health record architecture27. ISO 20301:2014 Health informatics - Health cards - General characteristics28. ISO 20302:2014 Health informatics - Health cards - Numbering system and registration
procedure for issuer identifiers29. ISO 21090:2011 Health informatics - Harmonized data types for information interchange30. ISO 21091:2013 Health informatics - Directory services for healthcare providers, subjects of care
and other entities31. ISO 21667:2010 Health informatics - Health indicators conceptual framework32. ISO 22077-1:2015 Health informatics - Medical waveform format - Part 1: Encoding rules33. ISO 22857:2013 Health informatics - Guidelines on data protection to facilitate trans-border
flows of personal health data34. ISO 25720:2009 Health informatics - Genomic Sequence Variation Markup Language (GSVML)
Technical Committee No. 230“Water, air and soil quality”, 117 standards
No. Standard number English title
1. CEN/TR 16788:2014 Characterization of sludges - Guideline of good practice for thermal processes2. EN 1017:2014 Chemicals used for treatment of water intended for human consumption - Half-
burnt dolomite3. EN 1018:2013+A1:2015 Chemicals used for treatment of water intended for human consumption -
Calcium carbonate4. EN 12050-1:2015 Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for
wastewater containing faecal matter5. EN 12050-2:2015 Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for
faecal-free wastewater6. EN 12050-3:2015 Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for
limited applications7. EN 12050-4:2015 Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for
faecal-free wastewater and wastewater containing faecal matter8. EN 12518:2014 Chemicals used for treatment of water intended for human consumption -
High-calcium lime9. EN 12566-3:2005+A2:2013 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or
site assembled domestic wastewater treatment plants10. EN 12876:2015 Chemicals used for treatment of water intended for hum. consump. - Oxygen11. EN 12926:2015 Chemicals used for treatment of water intended for human consumption -
Sodium peroxodisulfate12. EN 13071-2:2008+A1:2013 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2:
Additional requirements for underground or partly underground systems
70
13. EN 13176:2015 Chemicals used for treatment of water intended for human consumption -Ethanol
14. EN 13194:2015 Chemicals used for treatment of water intended for human consumption -Acetic Acid
15. EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 1: General requirements
16. EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 2: Laboratory performance test based ondetermination of sampling efficiency
17. CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 3: Analysis of sampling efficiency data
18. EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 4: Laboratory performance test based oncomparison of concentrations
19. EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 5: Aerosol sampler performance test andsampler comparison carried out at workplaces
20. EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement ofairborne particle concentrations - Part 6: Transport and handling tests
21. CEN/TS 13649:2014 Stationary source emissions - Determination of the mass concentration ofindividual gaseous organic compounds - Sorptive sampling method followedby solvent extraction or thermal desorption
22. EN 13946:2014 Water quality - Guidance for the routine sampling and preparation of benthicdiatoms from rivers and lakes
23. EN 14181:2014 Stationary source emissions - Quality assurance of automated measuringsystems
24. EN 14184:2014 Water quality - Guidance for the surveying of aquatic macrophytes in runningwaters
25. EN 14407:2014 Water quality - Guidance for the identification and enumeration of benthicdiatom samples from rivers and lakes
26. EN 14718:2014 Influence of organic materials on water intended for human consumption -Determination of the chlorine demand - Test method
27. EN 15030:2012+A1:2015 Chemicals used for treatment of water intended for human consumption -Silver salts for intermittent use
28. EN 15039:2014 Chemicals used for treatment of water intended for human consumption -Antiscalants for membranes - Polycarboxilic acids and salts
29. EN 15040:2014 Chemicals used for treatment of water intended for human consumption -Antiscalants for membranes - Phosphonic acids and salts
30. EN 15041:2014 Chemicals used for treatment of water intended for human consumption -Antiscalants for membranes - Polyphosphates
31. EN 15074:2014 Chemicals used for treatment of swimming pool water - Ozone32. EN 15362:2014 Chemicals used for treatment of swimming pool water - Sodium carbonate33. EN 15513:2014 Chemicals used for treatment of swimming pool water - Carbon dioxide34. ISO 17378-2:2014 Water quality - Determination of arsenic and antimony - Part 2: Method using
hydride generation atomic absorption spectrometry (HG-AAS)35. EN ISO 14644-8:2013 Cleanrooms and associated controlled environments - Part 8: Classification of
71
air cleanliness by chemical concentration (ACC) (ISO 14644-8:2013)36. EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of
microorganisms by two quantitative methods (ISO 17994:2014)37. ISO/TS 17379-2:2013 Water quality - Determination of selenium - Part 2: Method using hydride
generation atomic absorption spectrometry (HG-AAS)38. ISO 9698:2010 Water quality - Determination of tritium activity concentration - Liquid
scintillation counting method39. ISO 9697:2015 Water quality - Gross beta activity in non-saline water - Test method using
thick source40. ISO 9696:2007 Water quality - Measurement of gross alpha activity in non-saline water - Thick
source method41. EN ISO 9308-2:2014 Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 2:
Most probable number method (ISO 9308-2:2012)42. ISO 8672:2014 Air quality - Determination of the number concentration of airborne inorganic
fibres by phase contrast optical microscopy - Membrane filter method43. ISO 14442:2006 Water quality - Guidelines for algal growth inhibition tests with poorly soluble
materials, volatile compounds, metals and waste water44. ISO 10703:2007 Water quality - Determination of the activity concentration of radionuclides -
Method by high resolution gamma-ray spectrometry (ISO 10703:2007)45. EN 16370:2013 Chemicals used for treatment of water intended for human consumption -
Sodium chloride for on site electrochlorination using membrane cells46. EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements47. EN 16421:2014 Influence of materials on water for human consumption - Enhancement of
microbial growth (EMG)48. EN 15768:2015 Influence of materials on water intended for human consumption - GC-MS
identification of water leachable organic substances49. EN 16070:2014 Products used for treatment of water intended for human consumption -
Natural zeolite50. EN 15514:2014 Chemicals used for treatment of swimming pool water - Hydrochloric acid51. EN 1197:2014 Chemicals used for treatment of water intended for human consumption -
Monozinc phosphate solution52. EN 15363:2014 Chemicals used for treatment of swimming pool water - Chlorine53. EN 1113:2015 Sanitary tapware - Shower hoses for sanitary tapware for water supply systems
of type 1 and type 2 - General technical specification54. EN 12932:2015 Chemicals used for treatment of water intended for human consumption -
Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate55. EN 12933:2015 Chemicals used for treatment of water intended for human consumption -
Chemicals for emergency use - Trichloroisocyanuric acid56. EN 12931:2015 Chemicals used for treatment of water intended for human consumption -
Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous57. EN 13176:2015 Chemicals used for treatment of water intended for human consumption -
Ethanol58. EN 12876:2015 Chemicals used for treatment of water intended for human consumption –
Oxygen59. EN 14369:2015 Products used for treatment of water intended for human consumption - Iron-
coated granular activated alumina
72
60. EN 14368:2015 Products used for treatment of water intended for human consumption -Manganese dioxide coated limestone
61. EN 16146:2012+A1:2014 Sanitary tapware - Extractable shower hoses for sanitary tapware for supplysystems type 1 and type 2 - General technical specification
62. EN 1124-1:1999/A1:2004 Pipes and fittings of longitudinally welded stainless steel pipes with spigot andsocket for waste water systems - Part 1: Requirements, testing, quality control
63. EN 16506:2014 Systems for renovation of drains and sewers - Lining with a rigidly anchoredplastics inner layer (RAPL)
64. EN 12566-6:2013 Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricatedtreatment units for septic tank effluent
65. EN 16397-1:2014 Flexible couplings - Part 1: Performance requirements66. EN 1253-1:2015 Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at
least 50 mm67. EN 1253-2:2015 Gullies for buildings - Part 2: Roof drains and floor gullies without trap68. EN 295-1:2013 Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for
pipes, fittings and joints69. EN 295-2:2013 Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of
conformity and sampling70. EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for
adaptors, connectors and flexible couplings71. EN 295-5:2013 Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for
perforated pipes and fittings72. EN 295-6:2013 Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for
components of manholes and inspection chambers73. EN 295-7:2013 Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for
pipes and joints for pipe jacking74. EN 14654-2:2013 Management and control of operational activities in drain and sewer systems
outside buildings - Part 2: Rehabilitation75. EN 16323:2014 Glossary of wastewater engineering terms76. EN 16397-2:2014 Flexible couplings - Part 2: Characteristics and testing for metal banded flexible
couplings, adaptors and bushes77. EN 1124-4:2013 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and
socket for wastewater systems - Part 4: Components for vacuum drainagesystems and for drainage systems on ships
78. EN 14654-1:2014 Management and control of operational activities in drain and sewer systemsoutside buildings - Part 1: Cleaning
79. EN 1124-2:2014 Pipes and fittings of longitudinally welded stainless steel pipes with spigot andsocket for waste water systems - Part 2: System S, forms and dimensions
80. CEN/TR 16626:2014 Vitrified clay pipe systems for drains and sewers - Guidance for voluntarythird-party certification procedures
81. EN ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media anddevices for general ventilation - Part 1: Gas-phase air cleaning media
82. EN ISO 10121-2:2013 Test methods for assessing the performance of gas-phase air cleaning mediaand devices for general ventilation - Part 2: Gas-phase air cleaning devices(GPACD) (ISO 10121-2:2013)
83. EN ISO 29462:2013 Field testing of general ventilation filtration devices and systems for in situ
73
removal efficiency by particle size and resistance to airflow (ISO 29462:2013)84. EN ISO 29461-1:2013 Air intake filter systems for rotary machinery - Test methods - Part 1: Static
filter elements (ISO 29461-1:2013)85. EN ISO 15957:2015 Test dusts for evaluating air cleaning equipment (ISO 15957:2015)86. CEN/TS 16692:2015 Water quality - Determination of tributyltin (TBT) in whole water samples -
Method using solid phase extraction (SPE) with SPE disks and gaschromatography with triple quadrupole mass spectrometry
87. EN ISO 12010:2014 Water quality - Determination of short-chain polychlorinated alkanes (SCCPs)in water - Method using gas chromatography-mass spectrometry (GC-MS) andnegative-ion chemical ionization (NCI) (ISO 12010:2012)
88. EN 15910:2014 Water quality - Guidance on the estimation of fish abundance with mobilehydroacoustic methods
89. EN 16164:2013 Water quality - Guidance standard for designing and selecting taxonomic keys90. EN 13946:2014 Water quality - Guidance for the routine sampling and preparation of benthic
diatoms from rivers and lakes91. EN 16479:2014 Water quality - Performance requirements and conformity test procedures for
water monitoring equipment - Automated sampling devices (samplers) forwater and waste water
92. EN ISO 27108:2013 Water quality - Determination of selected plant treatment agents and biocideproducts - Method using solid-phase microextraction (SPME) followed by gaschromatography-mass spectrometry (GC-MS) (ISO 27108:2010)
93. EN 16493:2014 Water quality - Nomenclatural requirements for the recording of biodiversitydata, taxonomic checklists and keys
94. EN 16503:2014 Water quality - Guidance standard on assessing the hydromorphologicalfeatures of transitional and coastal waters
95. EN ISO 11206:2013 Water quality - Determination of dissolved bromate - Method using ionchromatography (IC) and post column reaction (PCR) (ISO 11206:2011)
96. EN ISO 14644-10:2013 Cleanrooms and associated controlled environments - Part 10: Classification ofsurface cleanliness by chemical concentration (ISO 14644-10:2013)
97. EN 16413:2014 Ambient air - Biomonitoring with lichens - Assessing epiphytic lichen diversity98. EN 16414:2014 Ambient air - Biomonitoring with mosses - Accumulation of atmospheric con-
taminants in mosses collected in situ: from the collection to the prep.of samples99. CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of
PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling ofPCDDs/PCDFs and PCBs
100. CEN/TS 16645:2014 Ambient air - Method for the measurement of benz[a]anthracene,benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene,dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene
101. EN ISO 16000-32:2014 Indoor air - Part 32: Investigation of buildings for the occurrence of pollutants102. EN ISO 16000-19:2014 Indoor air - Part 19: Sampling strategy for moulds (ISO 16000-19:2012)103. EN 14212:2012/AC:2014 Ambient air - Standard method for the measurement of the concentration of
sulphur dioxide by ultraviolet fluorescence104. EN 16457:2014 Characterization of waste - Framework for the preparation and application of a
testing programme - Objectives, planning and report105. CEN/TS 16675:2014 Characterisation of waste - Test methods for the determination of the
monolithic status of waste
74
106. EN 16377:2013 Characterization of waste - Determination of brominated flame retardants(BFR) in solid waste
107. EN 16123:2013 Characterization of waste - Guidance on selection and application of screeningmethods
108. CEN/TS 16023:2013 Characterization of waste - Determination of gross calorific value andcalculation of net calorific value
109. EN 16424:2014 Characterization of waste - Screening methods for the element composition byportable X-ray fluorescence instruments
110. EN 14429:2015 Characterization of waste - Leaching behaviour test - Influence of pH onleaching with initial acid/base addition
111. EN 14997:2015 Characterization of waste - Leaching behaviour test - Influence of pH onleaching with continuous pH control
112. EN 15863:2015 Characterization of waste - Leaching behaviour test for basic characterization -Dynamic monolithic leaching test with periodic leachant renewal, under fixedconditions
113. CEN/TS 16660:2015 Characterization of waste - Leaching behaviour test - Determination of thereducing character and the reducing capacity
114. EN 15002:2015 Characterization of waste - Preparation of test portions from the laboratorysample
115. CEN/TR 16456:2013 Characterization of sludges - Good practice of sludge dewatering116. CEN/TR 16394:2014 Characterization of sludges - Protocol for preparing synthetic suspensions117. CEN/TR 16394:2014/AC:2015 Characterization of sludges - Protocol for preparing synthetic suspensions
Technical Committee No. 248“Textiles and textile products”, 28 standards
No. Standard number English title
1. EN ISO 11092:2014 Textiles - Physiological effects - Measurement of thermal and water-vapourresistance under steady-state conditions (sweating guarded-hotplate test)
2. EN ISO 105-B01:2014 Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight3. EN ISO 13427:2014 Geosynthetics - Abrasion damage simulation (sliding block test)4. EN 14682:2014 Safety of children's clothing - Cords and drawstrings on children's clothing5. ISO/TS 13434:2008 Geosynthetics - Guidelines for the assessment of durability6. CEN/TS 14417:2014 Geosynthetic barriers - Test method for the determination of the influence of
wetting-drying cycles on the permeability of clay geosynthetic barriers7. CEN/TS 14418:2014 Geosynthetic Barriers - Test method for the determination of the influence of
freezing-thawing cycles on the permeability of clay geosynthetic barriers8. EN 13249:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in
the construction of roads and other trafficked areas (excluding railways andasphalt inclusion)
9. EN 13250:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use inthe construction of railways
10. EN 13251:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in
75
earthworks, foundations and retaining structures11. EN 13252:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in
drainage systems12. EN 13253:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in
erosion control works (coastal protection, bank revetments)13. EN 13254:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in
the construction of reservoirs and dams14. EN 13255:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in
the construction of canals15. EN 13256:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in
the construction of tunnels and underground structures16. EN 13257:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in
solid waste disposals17. EN 13265:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in
liquid waste containment projects18. EN 14533:2015 Textiles and textile products - Burning behaviour of bedding items -
Classification scheme19. EN ISO 14389:2014 Textiles - Determination of the phthalate content - Tetrahydrofuran method20. EN ISO 105-B02:2014 Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light:
Xenon arc fading lamp test (ISO 105-B02:2014)21. ISO 1136:2015 Wool - Determination of mean diameter of fibres - Air permeability method22. EN ISO 6938:2014 Textiles - Natural fibres - Generic names and definitions (ISO 6938:2012)23. ISO 2403:2014 Textiles - Cotton fibres - Determination of micronaire value24. CEN/TR 16792:2014 Safety of children's clothing - Recommendations for the design and
manufacture of children's clothing - Mechanical safety25. EN ISO 12945-3:2014 Textiles - Determination of the fabric propensity to surface pilling, fuzzing or
matting - Part 3: Random tumble pilling method (ISO 12945-3:2014)26. EN ISO 16373-3:2014 Textiles - Dyestuffs - Part 3: Method for determination of certain carcinogenic
dyestuffs (method using triethylamine/methanol) (ISO 16373-3:2014)27. EN ISO 18103:2015 Superfine woven wool fabric labelling - Requirements for Super S code
definition (ISO 18103:2015)28. EN 16653:2015 Rubber or plastics-coated fabrics - Determination of stitch tear resistance (using
1. EN 16185-1:2014 Railway applications - Braking systems of multiple unit trains - Part 1:Requirements and definitions
2. EN 16185-2:2014 Railway applications - Braking systems of multiple unit trains - Part 2: Testmethods
3. EN 16186-1:2014 Railway applications - Driver's cab - Part 1: Anthropometric data and visibility4. EN 16494:2015 Railway applications - Requirements for ERTMS Trackside Boards
76
5. EN 16273:2014 Railway applications - Track - Forged rail transitions6. EN 14752:2015 Railway applications - Body side entrance systems for rolling stock7. EN 12663-1:2010+A1:2014 Railway applications - Structural requirements of railway vehicle bodies - Part
1: Locomotives and passenger rolling stock (and alternative method for freightwagons)
Technical Committee No. 269“Heating boilers, gas cylinders and shell and water tube boilers”,
45 standards
No. Standard number English title
1. EN 26:2015 Gas-fired instantaneous water heaters for the production of domestic hot water2. EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water3. EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for
metallic materials4. EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials
and compliance with the material specification5. EN 764-1:2015 Pressure equipment - Part 1: Vocabulary6. EN 13445-8:2014/A1:2014 Unfired pressure vessels - Part 8: Additional requirements for pressure vessels
of aluminium and aluminium alloys7. EN 13445-3:2014/A1:2015 Unfired pressure vessels - Part 3: Design8. CEN/TR 13445-101:2015 Unfired pressure vessels - Example of application9. CEN/TR 13445-102:2015 Unfired pressure vessels - Part 102: Example of application of vertical vessel
with bracket supports10. EN 203-2-1:2014 Gas heated catering equipment - Part 2-1: Specific requirements - Open burners
and wok burners11. EN 203-2-3:2014 Gas heated catering equipment - Part 2-3: Specific requirements - Boiling pans12. EN 15632-1:2009+A1:2014 District heating pipes - Pre-insulated flexible pipe systems - Part 1:
Classification, general requirements and test methods13. EN 15632-2:2010+A1:2014 District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded
plastic service pipes - Requirements and test methods14. EN 15632-3:2010+A1:2014 District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded
system with plastic service pipes; requirements and test methods15. EN 16430-1:2014 Fan assisted radiators, convectors and trench convectors - Part 1: Technical
specifications and requirements16. EN 16430-2:2014 Fan assisted radiators, convectors and trench convectors - Part 2: Test method
and rating for thermal output17. EN 16430-3:2014 Fan assisted radiators, convectors and trench convectors - Part 3: Test method
and rating for cooling capacity18. EN 442-2:2014 Radiators and convectors - Part 2: Test methods and rating19. EN 13141-6:2014 Ventilation for buildings - Performance testing of components/products for
residential ventilation - Part 6: Exhaust ventilation system packages used in asingle dwelling
77
20. EN 13141-11:2015 Ventilation for buildings - Performance testing of components/products forresidential ventilation - Part 11: Supply ventilation units
21. EN ISO 14414:2015 Pump system energy assessment (ISO/ASME 14414:2015)22. EN 16644:2014 Pumps - Rotodynamic pumps - Glandless circulators having a rated power
input not exceeding 200 W for heating installations and domestic hot waterinstallations - Noise test code (vibro-acoustics) for measuring structure- andfluid-borne noise
23. EN ISO 11011:2015 Compressed air - Energy efficiency - Assessment (ISO 11011:2013)24. EN 15207:2014 Tanks for the transport of dangerous goods - Plug/socket connection and
supply characteristics for service equipment in hazardous areas with 24 Vnominal supply voltage
25. EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a workingpressure not exceeding 0,5 bar - Design and construction
26. EN 12309-1:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 1: Terms and definitions
27. EN 12309-4:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 4: Test methods
28. EN 12309-5:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 5: Requirements
29. EN 12309-6:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 6: Calculation of seasonal performances
30. EN 12309-7:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 7: Specific provisions for hybrid appliances
31. EN 12309-3:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 3: Test conditions
32. EN 12309-2:2015 Gas-fired sorption appliances for heating and/or cooling with a net heat inputnot exceeding 70 kW - Part 2: Safety
33. ISO 16903:2015 Petroleum and natural gas industries - Characteristics of LNG, influencing thedesign, and material selection
34. ISO 17945:2015 Petroleum, petrochemical and natural gas industries - Metallic materialsresistant to sulfide stress cracking in corrosive petroleum refining environments
35. ISO/TR 12489:2013 Petroleum, petrochemical and natural gas industries - Reliability modelling andcalculation of safety systems
36. ISO/TR 17177:2015 Petroleum and natural gas industries - Guidelines for the marine interfaces ofhybrid LNG terminals
37. ISO/TS 16901:2015 Guidance on performing risk assessment in the design of onshore LNGinstallations including the ship/shore interface
38. ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships39. ISO 6553:1980 Automatic steam traps - Marking40. ISO 6554:1980 Flanged automatic steam traps - Face-to-face dimensions41. ISO 6704:1982 Automatic steam traps - Classification42. ISO 6948:1981 Automatic steam traps - Production and performance characteristic tests43. ISO 7841:1988 Automatic steam traps - Determination of steam loss - Test methods44. ISO 7842:1988 Automatic steam traps - Determination of discharge capacity - Test methods45. ISO 19372:2015 Microturbines applications - Safety
78
Technical Committee No. 275“Food product analysis. Containers in contact with food”,
25 standards
No. Standard number English title
1. EN ISO 8442-5:2004 Materials and articles in contact with foodstuffs - Cutlery and table holloware -Part 5: Specification for sharpness and edge retention test of cutlery (ISO 8442-5:2004)
2. EN 12546-1:2000/AC:2005 Materials and articles in contact with foodstuffs - Insulated containers fordomestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs
3. EN 12014-1:1997/A1:1999 Foodstuffs - Determination of nitrate and/or nitrite content - Part 1: Generalconsiderations
4. EN ISO 21571:2005 Foodstuffs - Methods of analysis for the detection of genetically modifiedorganisms and derived products - Nucleic acid extraction (ISO 21571:2005)
5. EN ISO 11290-1:1996/A1:2004
Microbiology of food and animal feeding stuffs - Horizontal method for thedetection and enumeration of Listeria monocytogenes - Part 1: Detectionmethod - Amendment 1: Modification of the isolation media and thehaemolysis test, and inclusion of precision data (ISO 11290-1:1996/AM1:2004)
6. EN ISO 11290-2:1998/A1:2004
Microbiology of food and animal feeding stuffs - Horizontal method for thedetection and enumeration of Listeria monocytogenes - Part 2: Enumerationmethod - Amendment 1: Modification of the enumeration medium (ISO 11290-2:1998/AM1:2004)
7. EN 15055:2006 Non fatty foods - Determination of chlormequat and mepiquat - LC-MS/MSmethod
8. EN ISO 6888-3:2003/AC:2005 Microbiology of food and animal feeding stuffs - Horizontal method for theenumeration of coagulase-positive staphylococci (Staphylococcus aureus andother species) - Part 3: Detection and MPN technique for low numbers (ISO6888-3:2003)
9. EN 14185-2:2006 Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLCmethod with clean-up on a diatomaceous earth column
10. EN ISO 6887-4:2003/AC:2004 Microbiology of food and animal feeding stuffs - Preparation of test samples,initial suspension and decimal dilutions for microbiological examination - Part4: Specific rules for the preparation of products other than milk and milkproducts, meat and meat products, and fish and fishery products (ISO 6887-4:2003)
11. EN ISO 6579:2002/AC:2006 Microbiology of food and animal feeding stuffs - Horizontal method for thedetection of Salmonella spp (ISO 6579:2002/Cor.1:2004)
12. EN 16618:2015 Food analysis - Determination of acrylamide in food by liquid chromatographytandem mass spectrometry (LC-ESI-MS/MS)
13. EN 16619:2015 Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chryseneand benzo[b]fluoranthene in foodstuffs by gas chromatography massspectrometry (GC-MS)
14. EN 16620:2015 Food analysis - Determination of furan in coffee and coffee products byheadspace gas chromatography and mass spectrometry (HS GC-MS)
79
15. EN 16187:2015 Foodstuffs - Determination of fumonisin B1 and fumonisin B2 in processedmaize containing foods for infants and young children - HPLC method withimmunoaffinity column cleanup and fluorescence detection after pre-columnderivatisation
16. EN ISO 16649-3:2015 Microbiology of the food chain - Horizontal method for the enumeration ofbeta-glucuronidase-positive Escherichia coli - Part 3: Detection and mostprobable number technique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide(ISO 16649-3:2015)
17. EN ISO 7088:2005 Fish-meal - Vocabulary (ISO 7088:1981)18. EN ISO 6497:2005 Animal feeding stuffs - Sampling (ISO 6497:2002)19. EN ISO 13903:2005 Animal feeding stuffs - Determination of amino acids content (ISO 13903:2005)20. EN ISO 15914:2005 Animal feeding stuffs - Enzymatic determination of total starch content (ISO
15914:2004)21. EN ISO 5983-1:2005 Animal feeding stuffs - Determination of nitrogen content and calculation of
crude protein content - Part 1: Kjeldahl method (ISO 5983-1:2005)22. EN ISO 16472:2006 Animal feeding stuffs - Determination of amylase-treated neutral detergent
fibre content (aNDF) (ISO 16472:2006)23. EN ISO 17375:2006 Animal feeding stuffs - Determination of aflatoxin B1 (ISO 17375:2006)24. ISO 5498:1981 Agricultural food products - Determination of crude fibre content - General
method25. ISO/TS 16634-2:2009 Food products - Determination of the total nitrogen content by combustion
according to the Dumas principle and calculation of the crude protein content -Part 2: Cereals, pulses and milled cereal products
Technical Committee No. 286“Liquefied petroleum gas equipment and accessories”, 11 standards
No. Standard number English title
1. EN ISO 11120:2015 Gas cylinders - Refillable seamless steel tubes of water capacity between 150 land 3000 l - Design, construction and testing (ISO 11120:2015)
2. EN ISO 25760:2015 Gas cylinders - Operational procedures for the safe removal of valves from gascylinders (ISO 25760:2009)
3. EN 12007-3:2015 Gas infrastructure - Pipelines for maximum operating pressure up to andincluding 16 bar - Part 3: Specific functional requirements for steel
4. CEN/TR 13737-2:2014 Gas infrastructure - Implementation Guide for Functional Standards preparedby CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standards
5. EN 13953:2015 LPG equipment and accessories - Pressure relief valves for transportablerefillable cylinders for Liquefied Petroleum Gas (LPG)
6. EN 14912:2015 LPG equipment and accessories - Inspection and maintenance of LPG cylindervalves at time of periodic inspection of cylinders
7. EN 16631:2015 LPG equipment and accessories - Pressure relief valves for LPG pressurevessels - Reconditioning requirements
8. EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressurevessels - Ancillary equipment
80
9. CEN/TS 16765:2015 LPG equipment and accessories - Environmental considerations for CEN/TC286 standards
10. EN 14140:2014/AC:2015 LPG equipment and accessories - Transportable refillable welded steelcylinders for LPG - Alternative design and construction
11. ISO 8421-8:1990 Fire protection - Vocabulary - Part 8: Terms specific to fire-fighting, rescueservices and handling hazardous materials
Technical Committee No. 288“Execution of special geotechnical works”, 7 standards
No. Standard number English title
1. EN 1263-1:2014 Temporary works equipment - Safety nets - Part 1: Safety requirements, testmethods
2. EN 1263-2:2014 Temporary works equipment - Safety nets - Part 2: Safety requirements for thepositioning limits
3. EN 12699:2015 Execution of special geotechnical works - Displacement piles4. EN 14199:2015 Execution of special geotechnical works - Micropiles5. EN 1536:2010+A1:2015 Execution of special geotechnical work - Bored piles6. EN 1538:2010+A1:2015 Execution of special geotechnical work - Diaphragm walls7. EN ISO 18674-1:2015 Geotechnical investigation and testing - Geotechnical monitoring by field
instrumentation - Part 1: General rules (ISO 18674-1:2015)
Technical Committee No. 302“Milk, meet and their products”, 1 standard
No. Standard number English title
1. EN ISO 8968-5:2001 Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content (ISO 8968-5:2001)
Technical Committee No. 304“Documentation and information”, 33 standards
No. Standard number English title
1. CEN/TR 15449-5:2015 Geographic information - Spatial data infrastructures - Part 5: Validation andtesting
2. EN ISO 7010:2012/A5:2015 Graphical symbols - Safety colours and safety signs - Registered safety signs -Amendment 5 (ISO 7010:2011/Amd. 5:2014)
3. EN ISO 10628-1:2015 Diagrams for the chemical and petrochemical industry - Part 1: Specification ofdiagrams (ISO 10628-1:2014)
81
4. EN ISO 3098-1:2015 Technical product documentation - Lettering - Part 1: General requirements(ISO 3098-1:2015)
5. ISO 1086:1991 Information and documentation - Title leaves of books6. ISO 11940:1998 Information and documentation - Transliteration of Thai7. ISO 11940-2:2007 Information and documentation - Transliteration of Thai characters into Latin
characters - Part 2: Simplified transcription of Thai language8. ISO 15919:2001 Information and documentation - Transliteration of Devanagari and related
Indic scripts into Latin characters9. ISO 15924:2004 Information and documentation - Codes for the repress. of names of scripts10. ISO 18:1981 Documentation - Contents list of periodicals11. ISO 214:1976 Documentation - Abstracts for publications and documentation12. ISO 2145:1978 Documentation - Numbering of divisions and subdivisions in written
documents13. ISO 215:1986 Documentation - Presentation of contributions to periodicals and other serials14. ISO 233:1984 Documentation - Transliteration of Arabic characters into Latin characters15. ISO 233-2:1993 Information and documentation - Transliteration of Arabic characters into Latin
characters - Part 2: Arabic language - Simplified transliteration16. ISO 233-3:1999 Information and documentation - Transliteration of Arabic characters into Latin
characters - Part 3: Persian language - Simplified transliteration17. ISO 259:1984 Documentation - Transliteration of Hebrew characters into Latin characters18. ISO 259-2:1994 Intelligent transport systems - Account-based ticketing validation - Part 2:
Simplified transliteration19. ISO 3166-2:2013 Codes for the representation of names of countries and their subdivisions - Part
2: Country subdivision code20. ISO 3166-3:2013 Codes for the representation of names of countries and their subdivisions - Part
3: Code for formerly used names of countries21. ISO 3602:1989 Documentation - Romanization of Japanese (kana script)22. ISO 5122:1979 Documentation - Abstract sheets in serial publications23. ISO 5123:1984 Documentation - Headers for microfiche of monographs and serials24. ISO 6357:1985 Documentation - Spine titles on books and other publications25. ISO 7098:1991 Information and documentation - Romanization of Chinese26. ISO 7144:1986 Documentation - Presentation of these and similar documents27. ISO 7154:1983 Documentation - Bibliographic filing principles28. ISO 7275:1985 Documentation - Presentation of title information of series29. ISO 8:1977 Documentation - Presentation of periodicals30. ISO 843:1997 Information and documentation - Conversion of Greek characters into Latin
characters31. ISO 9:1995 Information and documentation - Transliteration of Cyrillic characters into
Latin characters - Slavic and non-Slavic languages32. ISO 9984:1996 Information and documentation - Transliteration of Georgian characters into
Latin characters33. ISO 9985:1996 Information and documentation - Transliteration of Armenian characters into
Latin characters
82
Technical Committee No. 307“Oilseeds, vegetable and animal fats and oils and their by-products.Characteristics and methods of sampling and analysis”, 2 standards
No. Standard number English title
1. EN ISO 12966-1:2014/AC:2015
Animal and vegetable fats and oils - Gas chromatography of fatty acid methylesters - Part 1: Guidelines on modern gas chromatography of fatty acid methylesters (ISO 12966-1:2014)
2. ISO 5498:1981 Agricultural food products - Determination of crude fibre content - Generalmethod
1. EN ISO 11979-2:2014 Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and testmethods (ISO 11979-2:2014)
2. EN ISO 11978:2014 Ophthalmic optics - Contact lenses and contact lens care products - Labelling(ISO 11978:2014)
3. EN ISO 11979-8:2015 Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements(ISO 11979-8:2006 + Amd 1:2011)
4. EN ISO 11135:2014 Sterilization of health-care products - Ethylene oxide - Requirements for thedevelopment, validation and routine control of a sterilization process formedical devices (ISO 11135:2014)
5. EN ISO 10343:2014 Ophthalmic instruments - Ophthalmometers (ISO 10343:2014)6. EN ISO 11979-6:2014 Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport
stability testing (ISO 11979-6:2014)7. EN ISO 11979-7:2014 Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations8. EN ISO 11979-8:2015 Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements
(ISO 11979-8:2006 + Amd 1:2011)9. EN ISO 12870:2014 Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO
12870:2012)10. EN ISO 13212:2014 Ophthalmic optics - Contact lens care products - Guidelines for determination
of shelf-life (ISO 13212:2014)11. EN ISO 14534:2015 Ophthalmic optics - Contact lenses and contact lens care products -
Fundamental requirements (ISO 14534:2011)12. EN ISO 14730:2014 Ophthalmic optics - Contact lens care products - Antimicrobial preservative
efficacy testing and guidance on determining discard date (ISO 14730:2014)13. EN ISO 8598-1:2014 Optics and optical instruments - Focimeters - Part 1: General purpose
15. EN ISO 11979-10:2006/A1:2014 Ophthalmic implants - Intraocular lenses - Part 10: Phakic intraocular lenses(ISO 11979-10:2006/Amd 1:2014)
16. CEN ISO/TS 13004:2014 Sterilization of health care products - Radiation - Substantiation of selectedsterilization dose: Method VDmaxSD (ISO/TS 13004:2013)
17. ISO/TS 19218-1:2011 Medical devices - Hierarchical coding structure for adverse events - Part 1:Event-type codes
18. ISO/TS 19218-2:2012 Medical devices - Hierarchical coding structure for adverse events - Part 2:Evaluation codes
19. ISO/TS 19218-1:2011/Amd1:2013
Medical devices - Hierarchical coding structure for adverse events - Part 1:Event-type codes
Technical Committee No. 320“Transport. Logistics and services”, 114 standards
No. Standard number English title
1. EN 16646:2014 Maintenance - Maintenance within physical asset management2. EN 16230-1:2013+A1:2014 Leisure karts - Part 1: Safety requirements and test methods for karts3. EN ISO 10239:2014 Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)4. EN ISO 10240:2004/A1:2015 Small craft - Owner's manual (ISO 10240:2004/Amd 1:2015)5. EN ISO 21487:2012/A1:2014 Small craft - Permanently installed petrol and diesel fuel tanks - Amendment 16. EN ISO 25197:2012/A1:2014 Small craft - Electrical/electronic control systems for steering, shift and throttle -
Amendment 1 (ISO 25197:2012/Amd 1:2014)7. EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission
measurement - Test-bed measurement of gaseous and particulate exhaustemissions (ISO 18854:2015)
8. EN ISO 13297:2014 Small craft - Electrical systems - Alternating current installations9. EN 2226:2014 Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand
and die forgings - De ≤ 150 mm10. EN 2278:2014 Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa
- Bars - De ≤ 150 mm11. EN 2838:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70
IRHD12. EN 2839:2013 Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80
IRHD13. EN 2841:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant -
Hardness 60 IRHD14. EN 2842:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant -
Hardness 70 IRHD15. EN 2843:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant -
Hardness 80 IRHD16. EN 2844:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant -
Hardness 90 IRHD17. EN 2845:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil
resistant - Hardness 50 IRHD
84
18. EN 2846:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oilresistant - Hardness 60 IRHD
19. EN 2847:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oilresistant - Hardness 70 IRHD
20. EN 2848:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oilresistant - Hardness 80 IRHD
21. EN 2849:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oilresistant - Hardness 90 IRHD
22. EN 3354:2013 Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Sheet for superplasticforming - a ≤ 6 mm
23. EN 3528:2013 Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted andvacuum arc remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa
24. EN 3783:2013 Aerospace series - Fibre composite materials - Normalisation of fibre dominatedmechanical properties
25. EN 4594:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethanefinish - Supersonic erosion resistance
26. EN 4595:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethanefinish - Subsonic erosion resistance
27. EN 4265:2013 Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel- Wide series - Dimensions and loads - Inch series
28. EN 3813:2013 Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wirefor forged fasteners - De ≤ 50 mm
29. EN 4266:2013 Aerospace series - Bearing spherical plain, metal to metal, in corrosion resistingsteel, cadmium plated - Wide series - Dimensions and loads - Inch series
30. EN 9115:2013 Quality Management Systems - Requirements for Aviation, Space and DefenseOrganizations - Deliverable Software (Supplement to EN 9100)
31. EN 6049-008:2013 Aerospace series - Electrical cables, installation - Protective sleeves in meta-aramidfibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copperbraid, flexible post installation operating temperature from – 55 ˚C to 200 ˚C -Product standard
32. EN 3716-004:2014 Aerospace series - Connectors, single-way with triaxial interface for transm. ofdigital data - Part 004: Solder plug and terminator - Product standard
33. EN 4826:2014 Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensilestrength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for partsand fasteners
34. EN 4651:2014 Aerospace series - Copper-clad aluminium alloy conductors for electrical cables -Product standard
35. EN 4628:2013 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened andtempered - Bar - De ≤ 200 mm — 1 150 MPa ≤ Rm ≤ 1 300 MPa
36. EN 4629:2013 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Softened - Forgingstock - De ≤ 300 mm
37. EN 4631:2013 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened andtempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
38. EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperatureflexibility
39. EN 2267-009:2013 Aerospace series - Cables, electrical, for general purpose - Operating temperaturesbetween - 55 °C and 260 °C - Part 009: DRA family, single and multicore assembly -Product standard
85
40. EN 3475-411:2014 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411:Resistance to fluids
41. EN 4056-004:2014 Aerospace series - Cable ties for harnesses - Part 004: Plastic cable ties - Foroperating temperatures - 55 °C to 105 °C and - 55 °C to 150 °C - Product standard
42. EN 4199-001:2013 Aerospace series - Bonding straps for aircraft - Part 001: Technical specification43. EN 4199-004:2014 Aerospace series - Bonding straps for aircraft - Part 004: Round bonding straps,
copper, tin plated -65 °C up to 150 °C and nickel plated -65 °C up to 260 °C -Product Standard
44. EN 4708-001:2014 Aerospace series - Sleeving, heat-shrinkable, for binding, insulation andidentification - Part 001: Technical specification
45. EN 6059-406:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods -Part 406: Vibration
46. EN 6059-502:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods -Part 502: Resistance to electrical arcs
47. EN 6059-504:2014 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods -Part 504: Temperature rise within a loom due to self-heating when protected by asleeve
48. EN 2402:2014 Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire- D ≤ 10 mm
49. EN 4627:2014 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened andtempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
50. EN 4630:2014 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened andtempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
51. EN 4707:2014 Aerospace series - Acid pickling of aluminum and aluminum alloy withouthexavalent chromium
52. EN 3826:2014 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD53. EN 3827:2014 Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD54. EN 4549:2014 Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel
alloy - Coupling end, welded - Design configuration - Inch series55. EN 4550-1:2014 Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 1:
Male sealing ends, spherical56. EN 4550-4:2014 Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 4:
Female sealing ends57. EN 4551:2014 Aero. series - Pipe coupling, 37°, in heat resisting steel- Swivel nuts - Inch series58. EN 3645-001:2013 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded
coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technicalspecification
59. EN 3660-025:2013 Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 025: Cable outlet, style A, straight, unsealed, withcable tie strain relief for EN 3646 - Product standard
60. EN 3660-027:2013 Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 027: Cable outlet, style A, 45°, unsealed, with cable tiestrain relief for EN 3646 - Product standard
61. EN 3660-038:2013 Aerospace series - Cable outlet accessories for circular and rectangular electricaland optical connectors - Part 038: Manual installation tool, style Z, for installation ofstainless steel shield termination band EN 3660-033, to cable outlet accessories -Product standard
62. EN 3682-005:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,
86
interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 005: Size 2 plug - Product standard
63. EN 3682-006:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 006: Size 3 receptacle - Product standard
64. EN 3682-007:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 007: Size 3 plug - Product standard
65. EN 3682-008:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 008: Size 4 receptacle - Product standard
66. EN 3682-009:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 009: Size 4 plug - Product standard
67. EN 2833-005:2013 Aerospace series - Glass fibre thermosetting preimpregnates - Technicalspecification - Part 005: Glass fabric/phenolic resin preimpregnate
68. EN 2840:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant -Hardness 50 IRHD
69. EN 3697:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperatureresistant - Hardness 60 IRHD
70. EN 3698:2013 Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperatureresistant - Hardness 70 IRHD
71. EN 9300-004:2013 Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technicalproduct documentation such as 3D, CAD and PDM data - Part 004: Descriptionmethods
72. EN 9300-011:2013 Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technicalproduct documentation such as 3D, CAD and PDM data - Part 011: Referenceprocess description "Data preparation"
73. EN 9300-012:2013 Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technicalproduct documentation such as 3D, CAD and PDM data - Part 012: Referenceprocess description ''Ingest''
74. EN 9300-013:2013 Aerospace series - LOTAR LOng Term Archiving and Retrieval of digital technicalproduct documentation such as 3D, CAD and PDM data - Part 013: Referenceprocess description ''Archival Storage''
75. EN 9300-014:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technicalproduct documentation such as 3D, CAD and PDM data - Part 014: Referenceprocess description ''Retrieval''
76. EN 9300-015:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technicalproduct documentation such as 3D, CAD and PDM data - Part 015: Referenceprocess description ''Removal''
77. EN 9104-001:2013 Aerospace series - Quality management systems - Part 001: Requirements forAviation, Space, and Defence Quality Management System Certification Programs
78. EN 4526:2013 Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensiletesting for sheet and strip
79. EN 3861:2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard- Thermally tempered soda lime float glass
80. EN 3862:2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard- Chemically tempered soda lime float glass
81. EN 3863:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods -
87
Determination of flatness82. EN 3866:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods -
Determination of ream and surface ripple83. EN 4106:2013 Aerospace series - Non-metallic materials - Structural adhesive systems - Paste
adhesive - Technical specification84. EN 4488:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds -
Threadlocking - Torque strength 2 Nm85. EN 4491:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds -
Threadlocking - Torque strength 16 Nm86. EN 4492:2013 Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds -
Threadlocking - Torque strength 19 Nm87. EN 4701-002:2013 Aerospace series - Connectors, optical, rectangular, modular, operating temperature
125 °C, for EN 4531-101 contacts - Part 002: Material88. EN 3864:2013 Aerospace series - Non-metallic materials - Glass transparencies - Test methods -
Determination of modulus of rupture89. EN 4632-006:2013 Aerospace series - Weldability and brazeability of materials in aerospace
constructions - Part 006: Homogeneous assemblies of titanium alloys90. EN 4701-003:2013 Aerospace series - Connectors, optical, rectangular, modular, operating temperature
125 °C, for EN 4531-101 contacts - Part 003: Module series 2 - Product standard91. EN 3646-004:2013 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating
temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting -Product standard
92. EN 3983:2013 Aerospace series - Aluminium alloy AL-P7050- T7651 - Plate -6 mm<a ≤ 160 mm93. EN 2032-001:2014 Aerospace series - Metallic materials - Part 001: Conventional designation94. EN 2030:2013 Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De
≤ 150 mm95. EN 4156:2013 Aerospace series - Rod ends, with self-aligning double row ball bearings and
threaded shank in steel - Inner ring and balls in corrosion resisting steel -Dimensions and loads - Inch series
96. EN 4538-2:2014 Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensionsand loads - Part 2: Inch series
97. EN 3682-001:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 001: Technical specification
98. EN 3682-002:2013 Aerospace series - Connectors, plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel, operating temperature 150 °C continuous- Part 002: Specification of performance and contact arrangements
99. EN 2565:2013 Aerospace series - Preparat. of carbon fibre reinforced resin panels for test purp100. EN 2043:2013 Aerospace series - Metallic materials - General requirements for semi-finished
product qualification (excluding forgings and castings)101. EN 4507:2013 Aerospace series - Non-metallic materials - Textiles - Test method - Determination
of water extractable matter102. EN 4505:2013 Aerospace series - Non-metallic materials - Textiles - Test method - Determination
of dimensional stability103. EN 4503:2013 Aerospace series - Non-metallic materials - Textiles - Test method - Determination
of water soluble chloride and sulfate of aqueous extracts104. EN 4262:2013 Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As
88
forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 880MPa105. EN 4263:2013 Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As
forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960MPa106. EN 4504:2013 Aerospace series - Non-metallic materials, Textiles - Test method - Determination of
flexibility of narrow fabrics107. EN 2648:2013 Aerospace series - Washers, concave, in alloy steel, cadmium plated108. EN 2267-010:2013 Aerospace series - Cables, electrical, for general purpose - Operating temperatures
between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable -Product standard
109. EN 2346-005:2013 Aerospace series - Cable, electrical, fire resistant - Operating temperatures between- 65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicoreassembly - Light weight - Product standard
110. EN 2665-001:2013 Aerospace series - Circuit breakers, three-pole, temperature compensated, ratedcurrent 20 A to 50 A - Part 001: Technical specification
111. EN 2665-004:2013 Aerospace series - Circuit breakers, three-pole, temperature compensated, ratedcurrent 20 A to 50 A - Part 004: UNC thread terminals - Product standard
112. EN 3155-065:2013 Aerospace series - Electrical contacts used in elements of connection - Part 065:Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard
113. EN 3155-066:2013 Aerospace series - Electrical contacts used in elements of connection - Part 066:Contacts, electrical, female, type A, crimp, class S, size 8 - Product standard
114. EN 3375-012:2013 Aerospace series - Cable, electrical, for digital data transmission - Part 012: Singlebraid - Star Quad 100 ohms - 260 °C - Type KH - Product standard
1. EN 12966:2014 Road vertical signs - Variable message traffic signs2. EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term
performance - Part 1: Acoustical characteristics3. EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term
performance - Part 2: Non-acoustical characteristics4. EN 1793-4:2015 Road traffic noise reducing devices - Test method for determining the acoustic
performance - Part 4: Intrinsic characteristics - In situ values of sound diffractio5. EN 12697-2:2015 Bituminous mixtures - Test methods - Part 2: Determination of particle size
distribution6. EN 1344:2013/AC:2015 Clay pavers - Requirements and test methods7. EN 1340:2003/AC:2006 Concrete kerb units - Requirements and test methods8. EN 15429-3:2015 Sweepers - Part 3: Efficiency of particulate matter collection - Testing and
Evaluation9. EN 15429-4:2015 Sweepers - Part 4: Symbols for operator controls and other displays10. ISO 1176:1990 Road vehicles - Masses - Vocabulary and codes11. ISO 22628:2002 Road vehicles - Recyclability and recoverability - Calculation method12. ISO 2416:1992 Passenger cars - Mass distribution13. ISO 2958:1973 Road vehicles - Exterior protection for passenger cars
89
14. ISO 3208:1974 Road vehicles - Evaluation of protrusions inside passenger cars15. ISO 3779:2009 Road vehicles - Vehicle identification number (VIN) - Content and structure16. ISO 3780:2009 Road vehicles - World manufacturer identifier (WMI) code17. ISO 3780:2009/Cor 1:2010 Road vehicles - World manufacturer identifier (WMI) code18. ISO 3832:2002 Passenger cars - Luggage compartments - Meth. of measuring reference
volume19. ISO 3833:1977 Road vehicles - Types - Terms and definitions20. ISO 4030:1983 Road vehicles - Vehicle identification number (VIN) - Location and
attachment21. ISO 4100:1980 Road vehicles - World parts manufacturer identifier (WPMI) code22. ISO 4130:1978 Road vehicles - Three-dimensional reference system and fiducial marks -
Definitions23. ISO 4131:1979 Road vehicles - Dimensional codes for passenger cars24. ISO 612:1978 Road vehicles - Dimensions of motor vehicles and towed vehicles - Terms
and definitions25. ISO 11375:1998 Building construction machinery and equipment - Terms and definitions26. ISO 11886:2002 Building construction machinery and equipment - Pile driving and
extracting equipment - Terminology and commercial specifications27. ISO 11886:2002/Cor 1:2006 Building construction machinery and equipment - Pile driving and
extracting equipment - Terminology and commercial specifications28. ISO 15643:2002/Amd 1:2012 Road construction and maintenance equipment - Bituminous binder
spreaders/sprayers - Terminology and commercial specifications29. ISO 15645:2002/Amd 1:2013 Road construction and maintenance equipment - Road milling machinery -
Terminology and commercial specifications30. ISO 15688:2012 Road construction and maintenance equipment - Soil stabilizers -
Terminology and commercial specifications31. ISO 16039:2004/Amd 1:2013 Road construction and maintenance equipment - Slipform pavers -
Definitions and commercial specifications32. ISO 19433:2008 Building construction machinery and equipment - Pedestrian-controlled
vibratory plates - Terminology and commercial specifications33. ISO 19452:2008 Building construction machinery and equipment - Pedestrian-controlled
vibratory (percussion) rammers - Terminology and commercialspecifications
34. ISO 19452:2008/Cor 1:2008 Building construction machinery and equipment - Pedestrian-controlledvibratory (percussion) rammers - Terminology and commercialspecifications
35. ISO 21873-1:2008 Building construction machinery and equipment - Mobile crushers - Part 1:Terminology and commercial specifications
36. ISO 21873-2:2009 Building construction machinery and equipment - Mobile crushers - Part 2:Safety requirements
37. ISO 22242:2005/Amd 1:2013 Road construction and road maintenance machinery and equipment - Basictypes - Identification and description