This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
"GL&Dsrl unipersonale"
Via Ceresone, 9 35035 Mestrino(PD) ITALY C.F. GBBLCU61A01F161 C/P.IVA 04724030285
Sede legale: Via Ceresone, 9 35035 Mestrino( PD) Italy
Tel/Fax 049 9003475 E-mail [email protected] Cod. fisc. e Partita IVA 04724030285
MODELS WOOD-CHIPPERS HÉRCULES:
- HÉRCULES 125UNIVERSAL
- HÉRCULES C150SE
- HÉRCULES CT150SE
- HÉRCULES M160SE
- HÉRCULES MT160SE
WOODCHIPPER HÉRCULES C125 UNIVERSAL
1 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 120 cm - Plugged through P.t.o shaft
- Hèrcules C125 universal is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- La Hèrcules C125 universal has a force-feeding of product and it is guarantee by a toothed roll with controlled hydraulic controllo idraulico and with instant reverse.
- this version works on 3-point hitch universal of 1° and 2 ° Cat.
- the control of the effort is manual The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 590 X 28
mm ( A X B )
220x150
Power needed (CV)
da 25 a 70
Quantity knives
2
di produz. Dell’azienda
KG
460
Production (m³/h)
Min 10 Max 16
Ø(mm) MAX
to chip
125
Dimensions
(mm)
A - B - C 126 - 135 -165
WOODCHIPPER HÉRCULES C150SE
1 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 150 cm - Plugged through P.t.o shaft
- Hèrcules C150SE is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- La Hèrcules C150SE has a force-feeding of product and it is guarantee by a toothed roll with controlled hydraulic controllo idraulico and with instant reverse.
- this version works on 3-point hitch universal of 1° and 2 ° Cat.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 160 cm - Plugged through P.t.o shaft
- Hèrcules M160SE is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Hèrcules M160SE has a force-feeding of product and it is guarantee by a toothed roll with controlled hydraulic controllo idraulico and with instant reverse.
- this version works on 3-point hitch universal of 1° and 2 ° Cat. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 160 cm - Plugged through P.t.o shaft
- Hèrcules MT160SE is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- La Hèrcules MT160SE has a force-feeding of product and it is guarantee by a toothed roll with controlled hydraulic controllo idraulico and with instant reverse.
- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power. The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 590 X 28
mm ( A X B )
220x160
Power needed (CV)
da 35 a 110
Quantity knives
2
di produz. Dell’azienda
KG
560
Production (m³/h)
Min 12 Max 25
Ø(mm) MAX
to chip
160
Dimensions
(mm)
A - B - C 148 - 258 -170
MODELS WOOD-CHIPPERS GALAXI:
- GALAXI C155DT
- GALAXI CT155DT
- GALAXI CTP155DT
- GALAXI M165DT
- GALAXI MT165DT
- GALAXI M225DT
- GALAXI MT225DT
- GALAXI MOTOR CDM150DT (MOTOR)
- GALAXI MOTOR CDB150DT (MOTOR)
WOODCHIPPER GALAXI C155DT
2 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft
- Galaxi C155DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi C155DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version works on 3-point hitch universal of 1° and 2 ° Cat.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 610 X 30
mm ( A X B )
220x160
Power needed (CV)
da 25 a 85
Quantity knives
2
di produz. Dell’azienda
KG
545
Production (m³/h)
Min 8 Max 21
Ø(mm) MAX
to chip
155
Dimensions
(mm)
A - B - C 126 - 140 -165
WOODCHIPPER GALAXI C155DT
2 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft
- Galaxi C155DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi C155DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 610 X 30
mm ( A X B )
220x160
Power needed (CV)
da 25 a 85
Quantity knives
2
di produz. Dell’azienda
KG
545
Production (m³/h)
Min 8 Max 21
Ø(mm) MAX
to chip
155
Dimensions
(mm)
A - B - C 148 - 255 -171
WOODCHIPPER GALAXI CTP155DT
2 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft
- Galaxi C155DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi C155DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version of the type half-brought on the universal three-point of 1 ° and 2 ° Cat. With pneumatic wheels of support, for to facilitate small agricultural tractors.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 610 X 30
mm ( A X B )
220x160
Power needed (CV)
da 25 a 85
Quantity knives
2
di produz. Dell’azienda
KG
545
Production (m³/h)
Min 8 Max 21
Ø(mm) MAX
to chip
125
Dimensions
(mm)
A - B - C 148 - 255 -171
WOODCHIPPER GALAXI M165DT
2 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 165 cm - Plugged through P.t.o shaft
- Galaxi M165DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi M165DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version works on 3-point hitch universal of 1° and 2 ° Cat. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 610 X 30
mm
230x170
Power needed (CV)
da 35 a 110
Quantity knives
2
di produz. Dell’azienda
KG
535
Production (m³/h)
Min 12 Max 25
Ø(mm) MAX
to chip
165
Dimensions
(mm)
A - B - C 126 - 149 -165
WOODCHIPPER GALAXI MT165DT
2 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 165 cm - Plugged through P.t.o shaft
- Galaxi MT165DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi MT165DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 610 X 30
mm ( A X B )
230x170
Power needed (CV)
da 35 a 110
Quantity knives
2
di produz. Dell’azienda
KG
580
Production (m³/h)
Min 12 Max 25
Ø(mm) MAX
to chip
160
Dimensions
(mm)
A - B - C 146– 260-165
WOODCHIPPER GALAXI M225DT
2 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 225 cm - Plugged through P.t.o shaft
- Galaxi M225DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi M225DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version works on 3-point hitch universal of 1° and 2 ° Cat. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 820 X 40
mm ( A X B )
290x250
Power needed (CV)
da 75 a 110
Quantity knives
2
di produz. Dell’azienda
KG
890
Production (m³/h)
Min 12 Max 38
Ø(mm) MAX
to chip
225
Dimensions
(mm)
A - B - C 245 – 149 -288
WOODCHIPPER GALAXI CDM150DT
2 FEED ROLLERS
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft
- Galaxi CDM150DT is designed to work with dry and green woods for satisfy also the extreme demands of operators. The machine has a DIESEL engine LOMBARDINI fox 4 cylinder.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi CDM150DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor.
- The hydraulic system is with temperature controlled.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft
- Galaxi CDB150DT is designed to work with dry and green woods for satisfy also the extreme demands of operators. The machine has a PETROL engine KOOLER.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi CDB150DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor.
- The hydraulic system is with temperature controlled.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 225 cm - Plugged through P.t.o shaft
- Galaxi MT225DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi MT225DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 820 X 40
mm ( A X B )
290x250
Power needed (CV)
da 75 a 160
Quantity knives
2
di produz. Dell’azienda
KG
950
Production (m³/h)
Min 12 Max 25
Ø(mm) MAX
to chip
225
Dimensions
(mm)
A - B - C 360 - 149 -288
CHIPPER MULTIFUNCTION OMEGA M4: - OMEGA M4
CHIPPER MULTIFUNCTION FUSION: - FUSION C155 DS / M175 DS MACHINES FOR MAKING PELLETS
CALIBRATE CHIPPER OMEGA M4 IS DESIGNED FOR THE PRODUCTION OF CHIPS SUITABLE FOR:
Mode Green
1° DISPOSAL PRUNINGS green and wet
Mode Chips 2° PRODUCE STANDARD CHIP
from 5/6 to 15/25 mm for boilers with cochlea over Ø 80 mm
Mode Calibrated
3° CHIPS FOR BURNINGS CALIBRATED of 6x6, 8x8, 10x10
from: boilers with feeders from 40/60 mm, pomace boilers, pellet
boilers and thermal chimneys.
Modalità Transformation
4° PRODUCE MICRO CHIPS suitable for machines for the production
of PELLET.
Woodchipper grader - Ø max to chip 150 mm - Actuated P.t.o. Agricola
From experience of chippers Hércules and Galaxy born the Super Calibrate Chipper OMEGA M4
- The chipper OMEGA M4 is designed for to work green and dry products, with extreme precision in the transformation of wood products in chip for boilers and micro-chips for produce pellets.
- The need to provide boilers with small power supplies, a calibrated chipped and perfect in the form, makes of OMEGA M4 the chipper that satisfies every user.
- The project is the result that realizes the dream of thousands of users.
- The chipper /sizer OMEGA M4 is made from a fantastic project, and has its secret is in the group of chipping / calibration; is equipped with a revolutionary system of ejection, which guarantees perfect operation in all conditions with every type of product, even to what you're thinking !!!
THE MULTIFUNCTIONAL WOODCHIPPER FUSION IS REALIZED WITH INNOVATIVE SYSTEM OF FEED-CHAIN
- Woodchipper FUSION is designed for chipping green and dry products and thanks to the Feeding special with chain allow to satisfy also the EXTREME DEMANDS OF THE MAINTENANCE.
- Woodchipper FUSION have a “NEW SYSTEM OF KNIVES” with 4 blades with a strong ventilation studing for disposal also of green prodcuts. The particular “control lever” allow to have an easy and quickly control on the feed.
MODELS TECHNICAL FEATURES
C155DS
Ø670 / 32mm
mm ( A X B )
230x170
Power MIN request (CV)
da 25
Quantity Knives
4
KG
535
Production (m³/h)
14 - 24
Ø(mm) MAX
Chipping
155
M175DS
Ø670 / 32mm
mm ( A X B )
230x170
Power MIN request (CV)
da 45
Quantity Knives
4
KG
580
Production
(m³/h)
14 - 30
Ø(mm) MAX
Chipping
170
CIPPATRICE GALAXI HY 100-120
2 FEED ROLLER
SISTEMA IDRAULICO INNOVATIVO
Disco Multifunzione
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 120 cm - Plugged through P.t.o shaft
- Galaxi HY100/120 is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi HY100/120 has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version works on 3-point hitch universal of 1° and 2 ° Cat.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
WIEDEMAN
HY 100
mm
POWER REQUIRED l/min IDR
Quantity knives
KG
Production (m³/h)
Ø(mm) MAX Cipp.
Dimensions (mm)
Ø 600 X 30
40/50
160 BAR
2/6
395
Min 6 Max 12
100
A - B - C 126 - 120 -165
HY 120
Ø 600 X 30
70/70 160 BAR
2/6
398
Min 8
Max 16
120
A - B - C 126 - 120 -165
MACHINE PELLET P200 PTO / MOTOR
DRAWING WITH 2 WHEELS OF COMPRESSION
- VERS. PTO 540 15/30 CV Prod.120/190 - VERS. WITH ENGINE LOMBARDINI DIESEL 2 CYLINDERS 18 CV Prod.120/190 - feed hopper - Cart with wheel for movement - 2 Toothed wheels for Compression - Special calibrator device ø280 for hard materials
MACHINE PELLET P400 PTO / MOTOR
DRAWING WITH 4 WHEELS OF COMPRESSION
- VERS. PTO 540 25/50 CV Prod.280/390 - VERS. WITH ENGINE LOMBARDINI DIESEL 4 CYLINDERS 36 CV Prod.280/390 - feed hopper - Cart with wheel for movement - 2 Toothed wheels for Compression - Special calibrator device ø280 for hard materials.
WOOD-CHIPPER TITANO
- VERSION PTO 15/20 CV - VERSION Petrol HONDA 11,7 CV Maximum diameter max 80 mm
N° knives 2 adjustable + 2 counterknives
discharge pipe adjustable
wheels for movement
Safety protection “CE”
Extra blade for Sifting Grid selector NEW Control feed manual