WMS puMp kit - Thermal Dynamics · cut with WMS WMS Pump Kit 9-0015 Filter Cartridge 9-0017 Input Power 1ph, 230V, 50/60Hz Water temperature 5°-60° C ... Water connections 3/8 ...

We Bring Intelligence to the Table.TM

WMS® puMp kit

Improves cut-quality and parts life when cutting with the WMS® process

Stabilises water pressure and compensates for low-pressure

Filters and optimises water for the WMS® process

WMS® (Water Mist Secondary) process, eliminating the need for expensive shield gasses.

WMS® puMp kit

All Victor Thermal Dynamics Auto-CutTM XT and Ultra-CutTM XT systems are capable of cutting non-ferrous metals using the exclusive WMS® (Water Mist Secondary) process, eliminating the need for expensive shield gasses.

This pump helps to achieve optimum results when using the WMS® process, by filtering andincreasing the pressure of the water supply.

UK: Victor Technologies Limited • Chorley North Industrial Park • Chorley, Lancashire PR6 7BX United Kingdom. Tel: +44 1257 224824 • Fax: +44 1257 224800 ITALY: Victor Technologies SRL • Via Benaco 3, 20098 San Giuliano Milanese (MI) Italy. Tel: +39 02 36546801 • Fax: +39 02 36546840GERMANY: Victor Technologies GmbH • Dierdorfer Straße 499 D-56566 • Neuwied-Gladbach Germany. Tel : +49 (0) 2631 999960 • Fax: +49 (0) 2631 9999610

www.VictorTechnologies.eu Email: [email protected] ©2013 Victor Technologies International

Example of a 20mm cut with WMS

WMS Pump Kit 9-0015Filter Cartridge 9-0017Input Power 1ph, 230V, 50/60HzWater temperature 5°-60° CInput pressure 1.2 barOutput pressure 0-10 bar, adjustableWater connections 3/8”Dimensions 247x190x500 mmWeight 14 kg

The filter cartridge should be changed every 12 months. (Depending on frequency of use.)

Specifications