Cut’n’Seal with Ultrasonics Cutting and Sealing . Cutting Punching . Perforating NONWOVENS
Cut’n’Sealwith Ultrasonics
Cutting and Sealing . CuttingPunching . Perforating
NONWOVENS
TELSONIC‘s product portfolio comprises a wide
range of technologies and equipment for the
following applications:
Ultrasonic Welding
Cut’n’Seal
Laser Welding
Vibration Welding
Hotplate Welding
Hot air Welding
Metal Welding
Cleaning
Sieving
Sonochemistry
Further information is available from our
subsidiaries listed below, or at
www.telsonic.com
2 Cut’n’Seal-TWIN-Stations in fullyautomated rotary table maschine
Cut’n’Seal applications
Bag for vacuum cleaner
TELSONIC AGIndustriestrasse 6CH-9552 BronschhofenPhone: +41 71 913 98 88Fax: +41 71 913 98 77Mail: [email protected]
TELSONIC GmbHGundstrasse 15D-91056 ErlangenPhone: +49 (0) 91 31 687 89 0Fax: +49 (0) 91 31 687 89 77Mail: [email protected]
TELSONIC UK Ltd.Units 14 & 15 Birch CopseTechnology RoadGB-Poole, Dorset BH17 7FHPhone: +44 (0) 1 202 697 340Fax: +44 (0) 1 202 693 674Mail: [email protected]
TELSONIC USA Inc.603 Heron Drive, Suite 7Pureland Industrial ComplexBridgeport, NJ 08014 USAPhone: +1 (856) 241 0400Fax: +1 (856) 241 0741Mail: [email protected]
TELSONIC d.o.o. KacLazara Stejina 3721241 KacSerbien/MontenegroPhone: +38 121 712 155Fax: +38 121 713 738Mail: [email protected]
Roop TELSONIC Ultrasonix Ltd.A/41 Nandkishore Industrial EstateO . Mahakali Caves RoadIND-Andheri (East), Mumbai 400 093Phone: +91 (0) 222 687 0990Fax: +91 (0) 222 687 0004Mail: [email protected]
Telsonic Ultrasonics Inc. 14150 Simone DriveShelby TownshipMichigan 48315, USAPhone: +1 (586) 802 00 33Fax: +1 (586) 802 00 34Mail: [email protected]
TELSONIC Companies
For our world wide representations please refer towww.telsonic.com
>
>
NONWOVENSPOWER PRECISION EXPERIENCE
Cosmetic pads with soft edges
Cut’n’Seal unit for filter membranes, integrated into automated production line
Cut’n’Seal is an ultrasonically
assisted process where thermo-
plastic material is cut or punched
out and simultaneously sealed at its
edges with itself or with a second plastics
part.
As a pioneer in the Cut’n’Seal technology,
TELSONIC will solve your application problem
with the comprehensive know-how based on
many years of experience.
Filter membrane punched out and welded to plastics part in one step
Variety of Cut’n’Seal applications
TELSONIC Companies
TELSONIC AGIndustriestrasse 6b9552 BronschhofenSwitzerland
Tel. +41 71 913 98 88Fax +41 71 913 98 77E-mail [email protected]
TELSONIC GmbH Gundstrasse 1591056 ErlangenGermany
Tel. +49 9131 687 89 0Fax +49 9131 687 89 77E-mail [email protected]
TELSONIC UK Ltd.Units 14 & 15 Birch CopseTechnology RoadPoole, Dorset BH17 7FHUnited Kingdom
Tel. +44 1202 697340Fax +44 1202 693674E-mail [email protected]
TELSONIC Utrasonics Inc.50350 Rizzo Drive
USA
Tel. +1 586 802 0033Fax +1 586 802 0034E-mail [email protected]
TELSONIC Ultrasonic Equipment(Shanghai) Co., Ltd.Building 30, 1st Floor201 Minyi Road, Songjiang DistrictShanghai, 201612China
Tel. +86 21 3373 0230Fax +86 21 3373 0231E-mail [email protected]
TELSONIC d.o.o. Kac Regionalni put 150 Novi Sad-Perlez bb21241 Kac Serbia
Tel. +38 121 710 010Fax +38 121 713 738E-mail [email protected]
Roop TELSONIC Ultrasonix Ltd.A/41 Nandkishore Industrial EstateOff. Mahakali Caves RoadAndheri (East), Mumbai 400 093India
Tel. +91 222 687 0990 Fax +91 222 687 0004E-mail [email protected]
^
^
Shelby Township, MI 48315
POWER PRECISION EXPERIENCE
Cut’n’Seal applications with large surface areas
require high forces for successful operation,
whereas Power Punching of plastic parts with
thick wall section demands high ultrasonic
output and powerful presses.
Telsonic have both and apply them
for customer specific solutions of
application problems – We can
also help with any special
applications that you may
have.
Cut’n’Seal portal for nonwovensapplications up to 720 mm seam
door panel (automotive)
Fully automatic Cut’n’Seal machine for the manufacture of medical compresses
in varying sizes and formats made up to 5 layers of material
Power Punching Press
POWER PRECISION NONWOVENS
For many years ultrasonically supported cutting
has been used for non-plastic applications.
When cutting bakery goods, energy bars,
cheese, pizza, pies etc., the vibrating (cold!)
sonotrode reduces friction and cleans itself of
adhering product particles.
The results are clean and reproduceable cuts
without deformation or thermal degradation
of the product.
When cutting tire rubber or polyurethane belts
with ultrasonic knives smooth transitions are
achieved which help to minimize the danger of
unbalanced end products.
Cake with cutting sonotrode
Sponge-cake
Ultrasonic knife for the cutting of tire rubber
Ultrasonic cutting of cheese
POWER PRECISION EXPERIENCE
You want to cut or punch out even the
smallest parts at extremely short cycle rates,
and optionally seal them at the same time?
No problem with TELSONIC’s highly advanced
Cut’n’Seal technology.
Success in your production is guaranteed by
precise Swiss tool manufacture and application
specific ultrasonic components, from standard
design to tailor-made high-tech special systems.
Twin unit for the simultaneous cutting and sealing of openings in automotive components.
Cutting with heat Cut’n’Seal with ultrasonic
Automotive bumper with punched out openings for distance sensors
Double utility Cut’n’Seal tool
Cut’n’Seal special machine
POWER PRECISION EXPERIENCE
Cut’n’Seal applications with large surface areas
require high forces for successful operation,
whereas Power Punching of plastic parts with
thick wall section demands high ultrasonic
output and powerful presses.
Telsonic have both and apply them
for customer specific solutions of
application problems – We can
also help with any special
applications that you may
have.
Cut’n’Seal portal for nonwovensapplications up to 720 mm seam
door panel (automotive)
Fully automatic Cut’n’Seal machine for the manufacture of medical compresses
in varying sizes and formats made up to 5 layers of material
Power Punching Press
POWER PRECISION NONWOVENS
For many years ultrasonically supported cutting
has been used for non-plastic applications.
When cutting bakery goods, energy bars,
cheese, pizza, pies etc., the vibrating (cold!)
sonotrode reduces friction and cleans itself of
adhering product particles.
The results are clean and reproduceable cuts
without deformation or thermal degradation
of the product.
When cutting tire rubber or polyurethane belts
with ultrasonic knives smooth transitions are
achieved which help to minimize the danger of
unbalanced end products.
Cake with cutting sonotrode
Sponge-cake
Ultrasonic knife for the cutting of tire rubber
Ultrasonic cutting of cheese
POWER PRECISION EXPERIENCE
You want to cut or punch out even the
smallest parts at extremely short cycle rates,
and optionally seal them at the same time?
No problem with TELSONIC’s highly advanced
Cut’n’Seal technology.
Success in your production is guaranteed by
precise Swiss tool manufacture and application
specific ultrasonic components, from standard
design to tailor-made high-tech special systems.
Twin unit for the simultaneous cutting and sealing of openings in automotive components.
Cutting with heat Cut’n’Seal with ultrasonic
Automotive bumper with punched out openings for distance sensors
Double utility Cut’n’Seal tool
Cut’n’Seal special machine
POWER PRECISION EXPERIENCE
Cut’n’Seal applications with large surface areas
require high forces for successful operation,
whereas Power Punching of plastic parts with
thick wall section demands high ultrasonic
output and powerful presses.
Telsonic have both and apply them
for customer specific solutions of
application problems – We can
also help with any special
applications that you may
have.
Cut’n’Seal portal for nonwovensapplications up to 720 mm seam
door panel (automotive)
Fully automatic Cut’n’Seal machine for the manufacture of medical compresses
in varying sizes and formats made up to 5 layers of material
Power Punching Press
POWER PRECISION NONWOVENS
For many years ultrasonically supported cutting
has been used for non-plastic applications.
When cutting bakery goods, energy bars,
cheese, pizza, pies etc., the vibrating (cold!)
sonotrode reduces friction and cleans itself of
adhering product particles.
The results are clean and reproduceable cuts
without deformation or thermal degradation
of the product.
When cutting tire rubber or polyurethane belts
with ultrasonic knives smooth transitions are
achieved which help to minimize the danger of
unbalanced end products.
Cake with cutting sonotrode
Sponge-cake
Ultrasonic knife for the cutting of tire rubber
Ultrasonic cutting of cheese
POWER PRECISION EXPERIENCE
You want to cut or punch out even the
smallest parts at extremely short cycle rates,
and optionally seal them at the same time?
No problem with TELSONIC’s highly advanced
Cut’n’Seal technology.
Success in your production is guaranteed by
precise Swiss tool manufacture and application
specific ultrasonic components, from standard
design to tailor-made high-tech special systems.
Twin unit for the simultaneous cutting and sealing of openings in automotive components.
Cutting with heat Cut’n’Seal with ultrasonic
Automotive bumper with punched out openings for distance sensors
Double utility Cut’n’Seal tool
Cut’n’Seal special machine
Cut’n’Sealwith Ultrasonics
Cutting and Sealing . CuttingPunching . Perforating
NONWOVENS
TELSONIC‘s product portfolio comprises a wide
range of technologies and equipment for the
following applications:
Ultrasonic Welding
Cut’n’Seal
Laser Welding
Vibration Welding
Hotplate Welding
Hot air Welding
Metal Welding
Cleaning
Sieving
Sonochemistry
Further information is available from our
subsidiaries listed below, or at
www.telsonic.com
2 Cut’n’Seal-TWIN-Stations in fullyautomated rotary table maschine
Cut’n’Seal applications
Bag for vacuum cleaner
TELSONIC AGIndustriestrasse 6CH-9552 BronschhofenPhone: +41 71 913 98 88Fax: +41 71 913 98 77Mail: [email protected]
TELSONIC GmbHGundstrasse 15D-91056 ErlangenPhone: +49 (0) 91 31 687 89 0Fax: +49 (0) 91 31 687 89 77Mail: [email protected]
TELSONIC UK Ltd.Units 14 & 15 Birch CopseTechnology RoadGB-Poole, Dorset BH17 7FHPhone: +44 (0) 1 202 697 340Fax: +44 (0) 1 202 693 674Mail: [email protected]
TELSONIC USA Inc.603 Heron Drive, Suite 7Pureland Industrial ComplexBridgeport, NJ 08014 USAPhone: +1 (856) 241 0400Fax: +1 (856) 241 0741Mail: [email protected]
TELSONIC d.o.o. KacLazara Stejina 3721241 KacSerbien/MontenegroPhone: +38 121 712 155Fax: +38 121 713 738Mail: [email protected]
Roop TELSONIC Ultrasonix Ltd.A/41 Nandkishore Industrial EstateO . Mahakali Caves RoadIND-Andheri (East), Mumbai 400 093Phone: +91 (0) 222 687 0990Fax: +91 (0) 222 687 0004Mail: [email protected]
Telsonic Ultrasonics Inc. 14150 Simone DriveShelby TownshipMichigan 48315, USAPhone: +1 (586) 802 00 33Fax: +1 (586) 802 00 34Mail: [email protected]
TELSONIC Companies
For our world wide representations please refer towww.telsonic.com
>
>
NONWOVENSPOWER PRECISION EXPERIENCE
Cosmetic pads with soft edges
Cut’n’Seal unit for filter membranes, integrated into automated production line
Cut’n’Seal is an ultrasonically
assisted process where thermo-
plastic material is cut or punched
out and simultaneously sealed at its
edges with itself or with a second plastics
part.
As a pioneer in the Cut’n’Seal technology,
TELSONIC will solve your application problem
with the comprehensive know-how based on
many years of experience.
Filter membrane punched out and welded to plastics part in one step
Variety of Cut’n’Seal applications
TELSONIC Companies
TELSONIC AGIndustriestrasse 6b9552 BronschhofenSwitzerland
Tel. +41 71 913 98 88Fax +41 71 913 98 77E-mail [email protected]
TELSONIC GmbH Gundstrasse 1591056 ErlangenGermany
Tel. +49 9131 687 89 0Fax +49 9131 687 89 77E-mail [email protected]
TELSONIC UK Ltd.Units 14 & 15 Birch CopseTechnology RoadPoole, Dorset BH17 7FHUnited Kingdom
Tel. +44 1202 697340Fax +44 1202 693674E-mail [email protected]
TELSONIC Utrasonics Inc.50350 Rizzo Drive
USA
Tel. +1 586 802 0033Fax +1 586 802 0034E-mail [email protected]
TELSONIC Ultrasonic Equipment(Shanghai) Co., Ltd.Building 30, 1st Floor201 Minyi Road, Songjiang DistrictShanghai, 201612China
Tel. +86 21 3373 0230Fax +86 21 3373 0231E-mail [email protected]
TELSONIC d.o.o. Kac Regionalni put 150 Novi Sad-Perlez bb21241 Kac Serbia
Tel. +38 121 710 010Fax +38 121 713 738E-mail [email protected]
Roop TELSONIC Ultrasonix Ltd.A/41 Nandkishore Industrial EstateOff. Mahakali Caves RoadAndheri (East), Mumbai 400 093India
Tel. +91 222 687 0990 Fax +91 222 687 0004E-mail [email protected]
^
^
Shelby Township, MI 48315
Cut’n’Sealwith Ultrasonics
Cutting and Sealing . CuttingPunching . Perforating
NONWOVENS
TELSONIC‘s product portfolio comprises a wide
range of technologies and equipment for the
following applications:
Ultrasonic Welding
Cut’n’Seal
Laser Welding
Vibration Welding
Hotplate Welding
Hot air Welding
Metal Welding
Cleaning
Sieving
Sonochemistry
Further information is available from our
subsidiaries listed below, or at
www.telsonic.com
2 Cut’n’Seal-TWIN-Stations in fullyautomated rotary table maschine
Cut’n’Seal applications
Bag for vacuum cleaner
TELSONIC AGIndustriestrasse 6CH-9552 BronschhofenPhone: +41 71 913 98 88Fax: +41 71 913 98 77Mail: [email protected]
TELSONIC GmbHGundstrasse 15D-91056 ErlangenPhone: +49 (0) 91 31 687 89 0Fax: +49 (0) 91 31 687 89 77Mail: [email protected]
TELSONIC UK Ltd.Units 14 & 15 Birch CopseTechnology RoadGB-Poole, Dorset BH17 7FHPhone: +44 (0) 1 202 697 340Fax: +44 (0) 1 202 693 674Mail: [email protected]
TELSONIC USA Inc.603 Heron Drive, Suite 7Pureland Industrial ComplexBridgeport, NJ 08014 USAPhone: +1 (856) 241 0400Fax: +1 (856) 241 0741Mail: [email protected]
TELSONIC d.o.o. KacLazara Stejina 3721241 KacSerbien/MontenegroPhone: +38 121 712 155Fax: +38 121 713 738Mail: [email protected]
Roop TELSONIC Ultrasonix Ltd.A/41 Nandkishore Industrial EstateO . Mahakali Caves RoadIND-Andheri (East), Mumbai 400 093Phone: +91 (0) 222 687 0990Fax: +91 (0) 222 687 0004Mail: [email protected]
Telsonic Ultrasonics Inc. 14150 Simone DriveShelby TownshipMichigan 48315, USAPhone: +1 (586) 802 00 33Fax: +1 (586) 802 00 34Mail: [email protected]
TELSONIC Companies
For our world wide representations please refer towww.telsonic.com
>
>
NONWOVENSPOWER PRECISION EXPERIENCE
Cosmetic pads with soft edges
Cut’n’Seal unit for filter membranes, integrated into automated production line
Cut’n’Seal is an ultrasonically
assisted process where thermo-
plastic material is cut or punched
out and simultaneously sealed at its
edges with itself or with a second plastics
part.
As a pioneer in the Cut’n’Seal technology,
TELSONIC will solve your application problem
with the comprehensive know-how based on
many years of experience.
Filter membrane punched out and welded to plastics part in one step
Variety of Cut’n’Seal applications
Shelby Township, MI 48315