106 Universal Wiring 48’ Harness For Lowboys, Flats, and Logging Trailers Comes complete with ABS power cordconnector , ABS warning light pigtail, metal 7-way plug, front & rear marker, leads and mid-turn and license plate pigtails. WIRING HARNESS KIT Part No. T-E-1546102
32
Embed
WIRING HARNESS KIT TRUCKLITE LIGHTING KIT - Trailco Parts
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
106
Universal Wiring 48’ Harness For Lowboys, Flats, and Logging TrailersComes complete with ABS power cordconnector , ABS warning light pigtail,metal 7-way plug, front & rear marker, leads and mid-turn and license plate pigtails.
NPT rear wire entry. For surfacemount - requires 1.25" diameter hole for installation.Mounting gasket and screws included. 12V.Red Part No. T-E-500012Amber Part No. T-E-500013Lens: Red T-E-920109
Amber T-E-920110
BETTS Clearance LampFlange diameter 4.062" high, 3.00"wide. Aluminum body,polycarbonate deep lens. Lensextends 2.25" from mountingsurface. Uses 67 bulb; Uses 1/4"NPT rear wire entry. For surfacemount - requires 1.25" diameterhole for installation.Red Part No. T-E-500014Amber Part No. T-E-500015Lens: Red T-E-920116
Amber T-E-920117
BETTS Clearance LampFlange diameter 4.062". Aluminumbody, polycarbonate lens. Uses 67bulb; Uses 1/4" NPT threaded wireentry. Recess mount; requires 3"diameter hole for installation.Mounting gasket and screws included.12V.Red Part No. T-E-600011Amber Part No. T-E-600012Lens: Red T-E-920109
Amber T-E-920110
Two 1/8" NPT wireentrances. Mountinggasket and screws included.For surface mount. 5.25"overall length. 12V.Red Part No. T-E-210001Amber Part No. T-E-210002
Betts Clearance LampTough Valox body withpolycarbonate Reflex lens.Shock-mount bulb socket.Mounts horizontally orvertically. Uses 168 bulb.One 1/4" NPT end wireentrance. Mounting gasketand screws included.Red Part No. T-E-200017Amber Part No. T-E-200018Lens: Red T-E-920058
Amber T-E-920059
Same light as above with two 1/4" NPT endentrances. Mounting gasket and screws included.Red Part No. T-E-200017Amber Part No. T-E-200018
Components For VaporProof Lighting Systems By
Special purpose lamp - same as above but uses 1157bulb in place of 67 bulb.Amber Part No. 500019
Identification Bar LampLow profile aluminum body with polycarbonate shallowlens. Uses 67 bulbs. Furnished with 1/8" NPT wireentrance on end. 17.25" overall length. Mountinggaskets and screws included. 12VRed Part No. T-E-200013Lens: Red T-E-920049
Solid brass pins
LED light source
Functions labeledand numbered
Lexan housing
BETTS CLEARANCE LIGHTS
Circuit CheckerA one man circuitchecker for 7 way plugs.Simply Plug checker into7 way cable and bring intocab. Activate switchesfor all circuits. The lightemitting diode willilluminate when circuit isin proper working order.Faulty wiring will beindicated if diodes aredimmer, fail to light, or ifmore than one isilluminated.Part No. T-E-920273
108
Round Surface Mount DuramoldSingle Bulb Clearance Lamp
• Seal tight snap on lens• Molded in O-ring• Heavy duty 2 c. p. wedge base
bulb• Flush mounting with attached
pigtailRed Part No. T-E-GR45412Yellow Part No. T-E-GR45413
21/2"
1" Deep
21/2" Diameter SealedClearance Lamp
White Duramold base• Fits popular grommet and bracket
mounting• Hermetic lens to housing seal• Twist on mounting fits all
With Optic Lens:Red Part No. T-E-GR45462Yellow Part No. T-E-GR45463With built-in Class "A" Reflector:Red Part No. T-E-GR46302Yellow Part No. T-E-GR46303
Red Part No. T-E-GR46792Yellow Part No. T-E-GR46793
2 Bulb Square CornerDie-Cast Clearance Lamp
• Scalloped "dipped" lens• Die-cast body• Torsion-Mount bulb cradle• Lubricated fleet service bulbs• Interchanges with Signal-Stat
1201, 1203 and 9007 lensRed Part No. T-E-GR46782Yellow Part No. T-E-GR46783
Fruehauf SpecialDuramold Clearance Lamp
• Fluted optics• Molded T-terminal• Designed to fit Fruehauf trailers• Lubricated fleet service bulbs• Corrosion-proof body• Replaces Fruehauf L-CE8750,
Signal-Stat 1220 and theSignal-Stat 9075 lens
Red Part No. T-E-GR46772Yellow Part No. T-E-GR46773
Multi-Function:Red Part No. T-E-GR53062Yellow Part No. T-E-GR53063Single Function:Yellow: Part No. T-E-GR53163
Die Cast AluminumClearance Lamp
• Mounts without disassembly• Holes interchange with
competitive lamps• Polycarbonate lens• Flat back, no socket hole required
Red Part No. T-E-GR46282Yellow Part No. T-E-GR46283
Narrow RailClearance Lamp
• Seal-tight expanded rubber gasket• Steel housing• 2 or 4 hole mounting• Flat back, no socket hole required• Snap-in lens
Red Part No. T-E-GR45172Yellow Part No. T-E-GR45173
Low Profile Bar Lamp• Three GR45412 clearance lamps• 11/4" high• 141/2" aluminum bar• Easy installation
Red Part No. T-E-GR49042
GROTE CLEARANCE LIGHTS
Duramold Single Bulb OvalClearance Lamp
With Built-In Reflector• Single bulb version of lamp above• Low Profile• Wedge base bulb
Red Part No. T-E-GR46712Yellow Part No. T-E-GR46713
2"
4"
Holes on 3" centers
21/8"
51/4"
Holes on 3" centers
21/8"
41/2"
Holes on 313/16" centers
141/2"
Holes on 81/2" centers
57/8"
Holes on 3" centers
2"
Popular Oval 2-BulbClearance Lamp
Popular style 2 bulb light featuresplastic base and Lexan lens.2" wide, 4" long. 12 V. With pigtail.Red Part No. T-E-1096733(GR45262)Yellow Part No. T-E-1096732(GR45263)Replacement Lenses:Red: Part No. T-E-1092579(GR90122)Amber: Part No. T-E-1092605(GR90123)
Die Cast AlloyClearance Lamp
Popular style rectangular clearancelight. 2 193 or 194 bulbs. Heavyduty die cast alloy base with O-ringfor weather-tight seal.2" wide, 4" long. 12V. With pigtail.Red Part No. T-E-1046332Yellow Part No. T-E-1046333Replacement O-RingPart No. T-E-PM139-18Replacement Lenses:Red: Part No. T-E-GR91962Amber: Part No. T-E-GR91963
GROTE STOP/TURN/TAIL
U.S. 40 Series, Economy,Stop-Tail-Turn Lamp
• Standard female connectionn• 4" dia. lamp• Fits all competitive pigtails,
brackets and grommets• Hermetic lens-to-housing seal
Part No. T-E-GR52922 Red
Blue Chip Premium, 40 Series,4" Torsion Mount® II,Stop/Tail/Turn Lamp
• Torsion Mount II, Gel-Mount®bulb cradle design.
• Uses 50% more cushioning gelthan standard lamp
• Tin plated bulb & track terminalsfor added corrosion protection.
• Female pin termination acceptsall popular connectionsPart No. T-E-GR52952 Red
111
GR66850
Sealed Marker Lamp Pigtails6" Long. Factory molded plugs for use with ULTRA-BLUE SEAL trailer wiring system
Double Seal:Chassis Ground:Fits U. S. 10, 15, 30 series, 4701 & 4702 series LED's6" long, black & white wires Part No. T-E-GR66850
Single Seal:Chassis Ground (w/Slim-Line Male) Part No. T-E-GR66800
Ring terminal groundw/blunt cut wire Part No. T-E-GR67050
Pigtail for resealable system. Fits all Grote 2-bulb markerlamps with flag terminals including 4519, 4526, 4544, 4546,4593, 4678 and 4679 series lamps. Integral grommet sealswire exit. Part No. T-E-GR67120
GR66800
GR67050
GR67120
GR66910
GR66911
GR67070
GR67002
Pigtail for 4680, 4684, 4686 and 4687 series lamps. Allconnections fit under lamps. Factory molded plugs for usewith ULTRA-BLUE-SEAL trailer wiring system.6" Long Part No. T-E-GR669106" Long Part No. T-E-GR66911Short Wire w/Grounding Outlet Part No. T-E-GR67070
Pigtail for 5306 lamps. For use with ULTRA-BLUE-SEALtrailer wiring system. O-ring prevents moisture andcorrosion. 6" long.
Part No. T-E-GR66900
Part No. T-E-GR66903
Part No. T-E-GR66904
Part No. T-E-GR66905
Dual function. O-ring seal helps prevent moisture andcorrosion. For use with ULTRA-BLUE-SEAL trailer wiringsystem. 11" long.
Part No. T-E-GR67002
3-Wire Plug-In Pigtails For Male Pin Lamps
Sentry Lamp Pigtails
Turtle-Back II Lamp Pigtails
Marker Lamp Pigtail
GROTE PIGTAILS
GR66905
GR66900
GR66903
GR66904
112
Dual function. O-ring seal helps prevent moisture andcorrosion. For use with ULTRA-BLUE-SEAL trailer wiringsystem. 111/2" long. Part No. T-E-GR67000
Accommodates 6 lamp systems. Molded termination avoidsmoisture and corrosion buildup. Part No. T-E-GR66810
3-Wire Plug-In Pigtails
9" Y Adaptor Pigtails
Adaptor Plug
Female to male pin lamp termination, and male to female pinlamp termination. Part No. T-E-GR66830
Replacement Lamp Socket PigtailsExceed all existing automotive requirements. Heavy gauge thermoplastic wire with brass contacts.Many competitive applications.
Double Contact, 7.5" long,red & black wires Part No. T-E-GR68130
Metri-PackTM Plug-In Sealed Pigtail
20" long. Fits either 4 or 5 wire applications;fits 5370, 5371, 5372 and 5376 series lamps
Part No. T-E-GR68680
GR67000
GR66810
GR66830
GR68130
GR68150
GR68080
GR68170
Double Contact, 6.5" longRed & black wires. Part No. T-E-GR68150
Single Contact, 9.5" long. Part No. T-E-GR68080
Single Contact, 9.5" long Part No. T-E-GR68170
Chrome Buttress StyleLight Guard
• Chrome plated die castPart No. GR43673
Header Mount Bracket Kit• Fits U. S, series 15 lamps• For narrow rail applications• Mountable at 45 degree anglePart No. T-E-GR43380 (white)
Corner Mounting Bracket• Fits U. S. series
21 lamps• Corner trailer
mounting• Molded in white with
9.5 degree radiusbase
• Legal mount forTurtle-Back II
Part No. T-E-GR43030
Twist-On Surface Mounting Bracket• Fits U. S, series
10 & 30 lamps• 2.125" X 5.625"• Holes on 4" centersPart No. T-E-GR43690
GROTE PIGTAILS, MOUNTING GROMMETS & BRACKETS
113/32"
419/64"
Closed Back Rubber Grommet• Fits U. S, series 40 lamps• For open installations where
splash plate is not used.Part No. T-E-GR91950
113
TRUCK-LITE CLEARANCE LIGHTS
Super 1021/2" Sealed Lamp With Reflector• Polycarbonate reflectorized lens• Lens and housing sonically
sealed• Shock mount extends bulb life• Mounts in all Model 10 mounting
devices• 12V
Red Lamp OnlyPart No. T-E-TL10208R
Yellow Lamp OnlyPart No. T-E-TL10208Y
Model 1021/2" Sealed Lamp
• Polycarbonate lens• Lens and housing sonically
sealed• Mounts in all Model 10 mounting
devices• 12V
Red Lamp OnlyPart No. T-E-TL10202R
Yellow Lamp OnlyPart No. T-E-TL10202Y
Reflectorized Lens:Red Lamp Only
Part No. T-E-TL10205RYellow Lamp Only
Part No. T-E-TL10205Y
Model 302" Sealed Lamp
• Polycarbonate lens• Lens and housing sonically sealed• Mounts in all Model 10 mounting
devices• 12V
Red Lamp OnlyPart No. T-E-TL30200R
Yellow Lamp OnlyPart No. T-E-TL30200Y
Model 30 ABS Warning Light2" Sealed Lamp With ABS Logo• Polycarbonate lens• Lens and housing sonically sealed• Mounts in all Model 10 mounting
devices• 12V
Yellow Lamp OnlyT-E-Part No. TL30257Y
Model 302" Sealed Lamp With Flange
• Polycarbonate lens and housing• Lens and housing sonically sealed• Flange is polycarbonate and
permanently affixed to lamp.• 12V
Flush Mount:Red Lamp Only
Part No. T-E-TL30221RYellow Lamp Only
Part No. T-E-TL30221YSurface Mount:
Red Lamp OnlyPart No. T-E-TL30222R
Yellow Lamp OnlyPart No. T-E-TL30222Y
Model 302" Beehive Lamp
• Designed for cab marker use• Polycarbonate lens and housing
sonically sealed.• 12V
Red Lamp OnlyPart No. T-E-TL30201R
Yellow Lamp OnlyPart No. T-E-TL30201Y
Clear Back:Yellow Lamp Only
Part No. T-E-TL30203Y
Model 102.5" Beehive Lamp
• Designed for cab marker use• Polycarbonate lens and housing
sonically sealed.
Flange Dia. 2.93" on both surfacemount and flush mount. Body Dia.2.30" on flush mount.
Model 15Rectangular Sealed Lamp
• Can be mounted horizontally orvertically
• Polycarbonate lens and housingare sonically sealed
• Mounts in all Model 10 mountingdevices. 12V
Red Lamp OnlyPart No. T-E-TL15200R
Yellow Lamp onlyPart No. T-E-TL15200Y
2.49"
1.20"
ABS
Model 10 Beehive LampRed Part No. T-E-TL10203RYellow Part No. T-E-TL10203Y
114
TRUCK-LITE CLEARANCE LIGHTS
Model 19Double Bulb Sealed lamp
• Lens and housing sonically sealed• Legal when one or both bulbs
operating, mounted horizontally orvertically
• 12VRed Lamp Only
Part No. T-E-TL19200RYellow Lamp Only
Part No. T-E-TL19200Y
Super 21Sealed Lamp
• Polycarbonate lens and housingsonically sealed
• Unique shock mount prolongslamp life
• 12VLamps Only with 96930 hot wire:
Red Part No. T-E-TL21001RYellow Part No. T-E-TL21001Y
With Reflectorized Lens:Red Part No. T-E-TL21002RYellow Part No. T-E-TL21002Y
Lamps Only:Red Part No. T-E-TL21200RYellow Part No. T-E-TL21200Y
With Reflectorized Lens:Red Part No. T-E-TL21201RYellow Part No. T-E-TL21201Y
Model 19Double Bulb Sealed lamp Kit
• Features unique plug-in design forease of installation of model 19lamps
• 12VLamp Kits with TL19720 Grey Base:
Red: Part No. T-E-TL19001RYellow: Part No. T-E-TL19001Y
Lamp Kits with TL19721 Grey Baseand Mounted Hot Wire:
Red Part No. T-E-TL19002RYellow: Part No. T-E-TL19002Y
Model 12Sealed Lamp
• Polycarbonate lens and housingsonically sealed
• Reflectorized lens• 12V
Lamps Only:Red Part No. T-E-TL12200RYellow Part No. T-E-TL12200Y
Super 21Extension Bracket Sealed Lamp• High impact white plastic
Lamps Kit with Reflectorized Lens:Red Part No. T-E-TL21501RYellow Part No. T-E-TL21501Y
Extension Bracket, WhitePart No. T-E-TL21720
Model 15Rectangular Sealed Lamp
With Branch Deflector Mount• Polycarbonate lens and housing
are sonically sealed• 12V
Red Lamp KitPart No. T-E-TL15001R
Yellow Lamp KitPart No. T-E-TL15001Y
Kit includes 1 TL15001R/Y Lamp,1 TL15720 Mount1 TL96904 Plug
Model 15Header Mount Sealed Lamp
• Features high impact plasticadaptor that fits most narrow rails.• Polycarbonate lens and housing
are sonically sealed• Mounts in all Model 10 mounting
devices• 12V
Red Lamp KitPart No. T-E-TL15008R
Yellow Lamp KitPart No. T-E-TL15008Y
Kit includes 1 TL15200R/Y Lamp,1 TL15727 Mount1 TL94924 Plug
4.375"3.625"
1.375"
4.500"4.100"
1.200"
3.78"
1.23"
4.500"
1.20"
Mounting Holes on 3.00" centers
Lamp Kit Contains: 1 TL19200R/Y 1 TL19720 Base
Lamp Kit Contains:1 TL19200R/Y
1 TL19721 Base/Wire
2.90"
1.40"
Mounting options for Model 12lights are special order items
6.00"
2.03"6.00"
1.20"
115
Model 26Bulb Replaceable Lamp
• Snap-in lens with plastic housing• Lens numbers 99055R/Y• Uses two replaceable 194 wedge-
base bulb.• 12V
Lamps With Pigtail:Red Part No. T-E-TL26301RYellow Part No. T-E-TL26301Y
Model 26Bulb Replaceable Lamp
• Snap-in lens with plastic housing* Lens numbers 99053R/Y• Uses two replaceable 194 wedge-
base bulb.• 12V
Lamps With Pigtail:Red Part No. T-E-TL26302RYellow Part No. T-E-TL26302Y
Model 14Sealed Lamp With Reflector
• Rectangular Polycarbonate lensand housing are sonically sealed
• Reflectorized lens• 12V
Lamps Only:Red Part No. T-E-TL14200RYellow Part No. T-E-TL14200Y
White Grommet:Part No. T-E-TL14700
4.00"
Model 18Bulb Replaceable Lamp
With Reflector• Sealed reflector lens and housing* Lens numbers TL99012R/Y• Uses replaceable 194 wedge-
base bulb and TL94940 plug.• 12V
Lamp Kits:Red Part No. T-E-TL18300RYellow Part No. T-E-TL18300Y
2.88"
1.938"
RecommendedGrommet Hole Size2.402"
3.505"
7/16" R
4.50"
Model 26Bulb Replaceable Lamp
With Rubber Housing• Snap-in lens and rubber housing* Lens numbers TL99051R/Y• Uses two replaceable 194 wedge-
base bulb.• 12V
Lamps With Pigtail:Red Part No. T-E-TL26310RYellow Part No. T-E-TL26310Y
Replaceable Lens:Red TL99051RYellow TL99051Y
1.625"
Model 26Pee-Wee Bulb Replaceable Lamp• Snap-lock lens, plastic housing* Lens numbers TL99052R/Y• Mounts without disassembly• Uses one 1895 bulb.• 12V
Lamps With Pigtail:Red Part No. T-E-TL26306RYellow Part No. T-E-TL26306Y
Replaceable Lens:Red Part No. T-E-TL99052RYellow Part No. T-E-TL99052Y
4.43"
1.560"
3.16" Overall2.68" Hole Centers
1.09"
4.00"
2.00"
Model 15Stainless Steel ID Bar
• Three TL15210R sealed lamps* Lamps on 6" centers• Includes TL93943 wiring harness• 12V
R ed Part No. T-E-TL15741R
Model 10 and Model 30 Black Enameled Metal ID Bar• Model 10 includes three TL10202R 21/2" sealed lamps, 12V• Model 30 includes three TL30200R 2" sealed lamps, 12V
4.00"
2.00"
Model 10ID Bar With Lamps On 6" Centers:
Red Part No. T-E-TL10744RIncludes TL93906 wiring harness.
ID Bar With Lamps On 9" Centers:Red Part No. T-E-TL10745R
Includes TL93908 wiring harness.
Model 30ID Bar With Lamps On 6" Centers:
Red Part No. T-E-TL30740RIncludes TL93906 wiring harness.
TRUCK-LITE CLEARANCE LIGHTS
116
Surface Mount Kit for21/2" Diameter Lamps
Stainless steel.Kit Part No. T-E-TL10400Kit contains One TL10720 mount
One TL94902 Plug
Open Grommet Mount Kit for21/2" Diameter Lamps
Vinyl grommet flush mount lamp,requires 2.781" diameter mountinghole.Kit Part No. T-E-TL10401Kit contains One TL10700 grommet
One TL94902 Plug
Closed Grommet Mount Kit for21/2" Diameter Lamps
Vinyl grommet flush mount lamp,requires 2.781" diameter mountinghole.Kit Part No. T-E-TL10402Kit contains One TL10702 grommet
One TL94902 Plug
Diaphragm Grommet Mount Kitfor21/2" Diameter Lamps
Used for edge lighting 21/2" diameterlamps.Kit Part No. T-E-TL10403Kit contains One TL10708 grommet
One TL94902 Plug
3" Grommet Mount Kit for21/2" Diameter Lamps
Vinyl grommet recess mounts lampsKit Part No. T-E-TL10414Kit contains One TL10704 grommet
One TL94902 Plug
Cam-On Mount Kit for21/2" Diameter Lamps
High impact plastic mount withbranch deflectorKit Part No. T-E-TL10410Kit contains One TL10728 mount
One TL94924 Plug
Surface Grommet Mount Kit for21/2" Diameter Lamps
Aluminum bracket mount allowslamps to be surface mounted in agrommet.Kit Part No. T-E-TL10412Kit contains One TL10700 Grommet
One TL10722 MountOne TL94902 Plug
Branch Deflector Mount Kit for21/2" Diameter Lamps
High impact plastic mount withbranch deflector allows lamp to besurface mounted.Kit Part No. T-E-TL10414Kit contains One TL10700 Grommet
One TL10725 MountOne TL94902 Plug
Model 15 GrommetVinyl grommet flush mounts Model15 rectangular sealed lamps. Can bemounted in panels up to .250" thick.Part No. T-E-TL15702
TRUCK-LITE CLEARANCE LIGHT MOUNTING ACCESSORIES
117
Model 15 Adaptor Mount KitStylish adaptor mounts model 15rectangular lamps.Adaptor Mount Kit, GrayKit Part No. T-E-TL15404Kit contains One TL00790 Adaptor
One TL94906 PlugAdaptor Mount Kit, ChromeKit Part No. TL15405Kit contains One TL00791 Adaptor
One TL94906 Plug
Self-Grounding Model 15Adaptor Mount Kit
Chrome adaptor mounts model 15rectangular lamps.Kit Part No. T-E-TL15407
Model 15 Branch DeflectorMount Kit
This branch deflector mount haspermanently fixed hot and groundcontacts.Adaptor Mount KitKit Part No. T-E-TL15401Kit contains One TL15720 Mount
One TL94904 Plug
Model 15 Rail Mount KitHigh impact plastic adaptor mountsthe model 15 lamps and features acutout area for the Fruehauf narrowrails.Rail Mount KitKit Part No. T-E-TL15412Kit contains One TL15727 Mount
One TL94924 Plug
Model 15 Header Mount KitHigh impact plastic adaptor mountsthe model 15 lamps and fits mostnarrow railsRail Mount KitKit Part No. T-E-TL15414Kit contains One TL15728 Mount
One TL94924 Plug
Model 19 Base Mount PartsFeatures unique plug-in design forease of installation of the TL19200R/Yand TL19206 lampsGray base:Part No. T-E-TL19720Gray Base With Hot Wire:Part No. T-E-TL19721Hot Wire:Part No. T-E-TL96904Hot Wire With .180 Bullet:Part No. T-E-TL96919
Model 19 Aluminum Lamp GuardUse with model 19 base mount lampkits. Holes on 3" centers.Part No. T-E-TL19724
Grommet Mount Kits for 2" LampsVinyl grommet flush mounts 2"diameter sealed lampsGrommet Mount Kit, Open Back :Kit Part No. T-E-TL30401Kit contains One TL30700 Grommet
One TL94902 PlugGrommet Mount Kit, Closed BackKit Part No. T-E-TL30402Kit contains One TL30702 Grommet
One TL94902 Plug
Surface Mount Kits for 2" LampsStainless steel mount kitKit Part No. T-E-TL30400Kit contains One TL30720 Mount
One TL94902 Plug
TRUCK-LITE CLEARANCE LIGHT MOUNTING ACCESSORIES
118
Cam-On Mount Kit for 2" Lamps
High impact plasticlamp mountKit Part No. T-E-TL30403Kit containsOne TL00801 MountOne TL94902 Plug
Branch DeflectorMount Kit
for 2" LampsHigh impact plastic lampmount with branch deflectorallows 2" lamps to be surfacemounted in a grommetKit Part No. T-E-TL30404Kit contains:One TL30700 GrommetOne TL30721 MountOne TL94902 Plug
Branch Deflector MountKit for 2" Lamps
High impact plastic lampmount with branch deflectorallows 2" lamps to be surfacemounted in a grommetKit Part No. T-E-TL30405Kit contains:One TL30701 GrommetOne TL30722 MountOne TL94902 Plug
Branch Deflector MountKit for 2" Lamps
High impact plastic lampmount with branch deflectorallows 2" lamps to be surfacemounted in a grommetKit Part No. T-E-TL30407Kit contains:One TL30701 GrommetOne TL30727 MountOne TL94902 Plug
TRUCK-LITE CLEARANCE LIGHT MOUNTING ACCESSORIES
Model 10 Mounting BracketHeavy steel angle bracket formounting grommets requiring 2.781"hole, grommet part number TL10700,TL10702, and TL10708 and grommetrequiring 3" hole, part numberTL10704Bracket w/225/32" HolePart No. TL10729Bracket w/3" HolePart No. T-E-TL10730
Model 30 Mounting BracketUsed for mounting grommetsrequiring 2.312" diameter hole, partnumbers TL30700 and TL30702Part No. T-E-TL30728
Right Angle Stop/Turn PlugFor use with single contact sealed stop/turn lamps
T-E-TL94992 1 Ground 101/2" #10 Ring Terminal White2 Tail 101/4" 6/32" Wire Strip Red
Right Angle Stop/Turn/Tail PlugFor use with double contact sealed stop/turn/tail lamps
T-E-TL94931 1 Ground 48" #10 Ring Terminal White2 Tail 48" 6/32" Wire Strip Black3 Stop/Turn 48" 6/32" Wire Strip Red
T-E-TL94993 1 Ground 101/2" #10 Ring Terminal White2 Tail 101/4" 6/32" Wire Strip Black3 Stop/Turn 101/4" 6/32" Wire Strip Red
Right Angle Stop/Turn/Tail Plug With AdaptorConverts one stop/turn/tail into two stop/turn/tail plugs
T-E-TL94932 1 Ground 10" WhitenworB"01liaT 2
deR"01nruT/potS 3
- 1- 2
Two Plug AdaptorConverts single plug female harness into a conventional twoplug male harness to mate with most sealed S/T/T lampsT-E-TL94865 1 Ground 10" White
nworB"01liaT 2deR"01nruT/potS 3
Single Plug AdaptorConverts single plug female harness into a conventional singleplug male harness which mates with most sealed S/T/T lampsT-E-TL94897 1 Ground 5" White
nworB"5liaT 2deR"5nruT/potS 3
(16 Ga. GPT wires)
Socket AssemblyFor 91311, 60330 and 60332 lamps. Bulb included
T-E-TL94959 1 Ground 71/2" #10 Ring Terminal White(#1156 bulb) 2 Stop/Turn 8" 6/32" Wire strip Red
T-E-TL95407 1 Ground 71/2" #10 Ring Terminal White(#1157 Bulb) 2 Tail 8" 6/32" Wire strip Black
121
Cab Marker LightLens and housing are sonicallysealed. Contains TL94940 plug and194 wedge base bulb. Replaceslamps used on many Ford trucks.
Width: 3.60"Length: 5.930"Yellow Part No. T-E-TL25760Y
Cab Marker LightFeatures single screw snap-in lensmounting and contoured rubberhousing. Contains one 67 bulb.Replacement lens: TL99067Y
Width: 2.190"Length: 5.530"Yellow Part No. T-E-TL26765Y
Cab Marker LightFeatures chrome plated plastichousing with contour base and rubbermounting pad. Includes on 97 bulband replaceable lens.Replacement lens: TL99066Y
Width: 2.190"Length: 5.530"Yellow Part No. T-E-TL26760Y
Cab Marker LightFeatures snap-on lens, chrome finishhousing and adjustable swivel base.Mounts on 2" mounting hole centers.Contains one 67 bulb.Replacement lens: TL99065Y
Width: 3.875"Length: 4.500"Red Part No. T-E-TL26763RYellow Part No. T-E-TL26763Y
Cab Marker LightFeatures single screw lens mountingand rubber mounting pad. Mounts on11/2" mounting hole centers.Contains one 904 bulb.Replacement lens: TL99063/Y
Width: 2.720"Length: 3.360"Red Part No. TL26771RYellow Part No. TL26771Y
PETERSON CLEARANCE LIGHTS
Clearance LightSelf-gasketing neoprene housingseals out dirt and moisture. PatentedVibar® vinyl socket reducespremature bulb failureLamps With Pigtail:
Red Part No. T-E-PM100RYellow Part No. T-E-PM100A
Lens:Red Part No. T-E-PM100-15RAmber Part No. T-E-PM100-15A
Clearance LightLexan housing will not distort atextreme hot or cold temperatures.Patented Vibar® socket insuresgreatly extended bulb life. Lenssnap-seals into housing.
Red Part No. T-E-PM104RYellow Part No. T-E-PM104A
Lens:Red Part No. T-E-PM100-15RAmber Part No. T-E-PM100-15A
Clearance LightReflectorized lens. Molded base withsingle bulb socket. Includes pigtail.Snap-on lens. 193 or 194 bulb
Red Part No. T-E-PM108WRYellow Part No. T-E-PM108WA
Lens:Red Part No. T-E-PM108-15RAmber Part No. T-E-PM108-15A
PETERSONMANUFACTURINGCO.
TRUCK-LITE CAB MARKER LIGHTS
122
STOP/TURN/TAIL LIGHTS
Stop/Turn/Tail LightPolycarbonate shallow lens and shockmount bulb socket. Uses 1156 or 1157bulb, 920134 red lens. Mounting gasketand screws included. Body must bedrilled and tapped for wire entry.Recess mount.Part No. T-E-400066
Stop/Turn/Tail LightPolycarbonate deep lens and shock mountbulb socket. Uses 1156 or 1157 bulb,920144 red lens. Mounting gasket andscrews included. Body must be drilled andtapped for wire entry. Recess mount.Part No. T-E-400067
plastic flange permanentlyaffixed to Super 40 lamp.
• Flange O.D. 5.50"• 12V
Red Super 40 lamp withgray flange only:Part No. T-E-TL40258R
Model 404" Stop/Turn/Tail
Lamp Kit With Flange• Features high impact
plastic flange permanentlyaffixed to Model 40 lamp.
• 5.50" flange O. D.• 12V
Red Model 40 lamp Kit:Part No. T-E-TL40022R
Kit includes lamp andTL94993 plugRed 12V lamp andflange only:
Part No. T-E-TL40222R
Super 40 4"Stop, Turn, Tail,Park, Clearance Lamp• Lens and housing are sealed.• Unique shock mount design prolongs bulb life.• Lamp mounts in 41/2" hole using vinyl grommet.• Kits include lamp, TL40700 grommet and TL94993 plug• 12V
Red Super 40 Kit:Part No. T-E-TL40042R
Yellow Super 40 Kit:Part No. T-E-TL40042Y
Red Super 40 Kitwith Reflector:
Part No. T-E-TL40048R
Red Sealed Lamp Only:Part No. T-E-TL40242R
Yellow Sealed Lamp Only:Part No. T-E-TL40242Y
Red Sealed Lamp OnlyWith Reflector:
Part No. T-E-TL40248R
• Sealed polycarbonate lens & housing• Grommet kit features flush mounting in a 4-1/2" hole• Flange kits feature a high impact plastic affixed to lamp• Material: Polycarbonate lens & housing, ABS flange,
Part No. T-E-TL40282R·Sealed polycarbonate lens & housing·Grommet kit features flush mounting in a 4-1/2" hole·Flange kits feature a high impact plastic affixed to lamp
Material:Polycarbonate lens & housing, ABS flange, PVC grommet16 gauge wire, Light Source: Designed at 12.8v, 2.1/.48amp dual filament bulb rated at 32/2 cp
Model 40 Economy 4" StopTurn/TailGrommet Mount Lamp
• Lens and housing are sealed• Lamp mounts in 41/2" hole
using vinyl grommet.• Kits include lamp, TL40700
grommet and TL94993 plugRed 12V Kit
Part No. T-E-TL40028RRed 12V Lamp Only
Part No. T-E-TL40282RYellow 12V Lamp Only
Part No. T-E-TL40282Y
Model 404" Grommet Mount
Lamp with Clear Housing• Lens and housing are
sealed• Lamp mounts in 41/2" hole
using vinyl grommet.Red 12V Lamp Only
Part No. T-E-TL40206R
Model 40 4" Stop/Turn/TailGrommet Mount Lamp Kits• Heavy duty shock mount with dual filiment bulb• Lens and housing are sealed• Lamp mounts in 41/2" hole using vinyl grommet.• Kits include lamp, TL40700 grommet and TL94993 plug
Red 12V Kit:Part No. T-E-TL40002R
Yellow 12V Kit:Part No. T-E-TL40002Y
Red 24V Kit:Part No. T-E-TL40009R
Red 12V Lamp Only:Part No. T-E-TL40202R
LLV 45 Stop/Turn/Tail/Hazard/Backup/Reflector• A direct replacement for lamps used on the U. S.
Postal Service L.L.V.• Unique shock mount
prolongs bulb life. 12VYellow turn/hazard lamp only:
Part No. T-E-TL45221Y
Note: LLV lamps aredesigned to be mountedwith 7" - 11" roll backfrom the vertical plane.
Super 45Stop/Turn/Tail/Park/Clearance Lamp
• Unique shock mount design prolongs bulb life.• Lens and housing are sealed• Lamp mounts in 41/2" hole using vinyl grommet.• Kits include lamp, TL45700 grommet and TL94993 plug• 12V
Red Super 45Stop/turn/tail Lamp Kit:
Part No. T-E-TL45002RKit includes lamp, TL45700grommet and TL94993 plugRed Sealed Lamp Only:
Part No. T-E-TL45202RRedTurnSignal Bulb Only:
Part No. T-E-TL45201RYellow, Front Park AndTurn Lamp Only:
Part No. T-E-TL45202Y
Model 41Sealed Stop/Turn/Tail/Clearance Lamp
• Rectangular polycarbonate lens and housingare sealed
• Lamp mounts in 7.83" X 4.43" hole• 12V
Red LH lamp kit:Part No. T-E-TL41005R
Kit includes TL94948 plugRed RH Lamp Kit:
Part No. T-E-TL41006RKit includes TL94949 plugRed Universal LampKit:
Part No. T-E-TL41007RKit includes one TL41202R,one TL41203R andone TL94926 plugRed LH Lamp only
Red Lamp:Part No. T-E-TL90315RReplacementlens number: TL99088R
Model 91 7" SealedStop/Turn/Tail/Park Clearance Lamp
• Polycarbonate lens and housing are sealed.• Shock mounted dual filament bulb• Mounts in 5.375" hole• 7" lens diameter, lens and housing 3.62" deep• 12V
Red Lamp Kit: Part No. T-E-TL91002RRed Lamp Only: Part No. T-E-TL91202RYellow Lamp Kit: Part No. T-E-TL91002YYellow Lamp Only: Part No. T-E-TL91202Y
Model 80 Bulb Replaceable Stop/Turn/Tail/Clearance Lamp
• Black steel orstainless steel housing
• Flush mount withrecessed lens andTL97945 steelretaining ring,
• One 1157 bulb, 12V• Flange O.D. 5.50"• Replacement lens part
numbers are TL99008R & TL99008YRed Lens, Black Housing: Part No. T-E-TL80334RRed Lens, Stainless Housing: Part No. T-E-TL80335R
Model 80 Hook-Up Products 5" Bulb Replaceable
Part No. T-E-TL80423C7 Way Receptacle w/15 ampcircuit breakers, split pins
• Designed to illuminate area between truck & trailer• Features chrome-plated die cast housing• Mounts to flat body surface with three screws• Not intended for use as a back-up lamp• Material: Chrome-plated die cast housing, Acrylic lens 16 gauge wire, Light Source: Bulb: #1156, Designed at 12.8v, 2.1 amp, 32cp
129
Multi-FunctionWithMetri Pack Connector
GM/IH/Navistar• Polycarbonate lens and
housing with Metri Packreceptacle on left side
• One 1157 bulb forstop/tail/turn/licenseillumination, one 1156bulb for backup
• Polycarbonate lens andhousing with Metri Packreceptacle on right side
• One 1157 bulb forstop/tail/turn/, one 1156bulb for backup
• 3 stud mounting on 2"centers
• 6.668" x 5.75" lens• Replaces OEM numbers
15613943, 15565731• Uses plug assembly
TL95000 availableseparately. 12V
LH Red Lamp:Part No. T-E-TL80381R
Multi-Function With Metri Pack Connector - Mack• Polycarbonate lens and housing with Metri Pack
receptacle on left side• One 1157 bulb for
stop, tail, turn, licenseillumination, one 1156bulb for backup
• 2 stud mounting on2" centers
• 6.668" x 5.75" lens• Replaces OEM number
14M052M• Uses plug assembly
TL95000 availableseparately
• 12VRH Red Lamp:
Part No. T-E-TL80382R
Multi-FunctionWith Metri Pack
Connector - Navistar• Polycarbonate lens and
housing with Metri Packreceptacle on both sides
• One 1157 bulb forstop/tail/turn/licenseillumination, one 1156bulb for backup
• 3 stud mounting on 2"centers
• 6.668" x 5.75" lens• Replaces OEM number
1661281C91• Uses plug assembly
TL95000 availableseparately
• 12VRH Red Lamp:
Part No. T-E-TL80383R
Model 80 Bulb ReplaceableMulti-Function GM-IH
• Reflector lens with backupand license plate illumination• One 1157 bulb for
stop/tail/turn/licenseillumination, one 1156bulb for backup
• 3 stud mounting andintegral black housing
• Replacement lensTL99068R. 12V
RH Red Lamp:Part No. T-E-TL80331R
LH Red Lamp:Part No. T-E-TL80330R
Lens: 6.880" High,5.25" Wide
Housing: 2.75" Deep
Lens: 6.880" High,5.25" Wide
Housing: 2.75" Deep
Lens: 6.880" High,5.25" Wide
Housing: 2.75" Deep
Lens: 6.880" High,5.25" Wide
Housing: 2.75" Deep
Lens: 6.880" High,5.25" Wide
Housing: 2.75" Deep
TRUCK-LITE STOP/TURN/TAIL LIGHTING
Bulb Replaceable Arrow T/S Products 7" Round• Lamp functions as a turn signal & features a directional arrow• Heavy-duty steel base painted with black epoxy for added protection• Surface mounts with four #10 screws on a 6.25" bolt circle• Requires a 1" diameter hole, 1" deep• Popular lamp on buses & emergency vehicles• Acrylic lens attaches to lamp with 4 screw•Material: Acrylic lens, Steel base, Black foam gasket 14 gauge wire, Light Source: Bulb: #1156, S-8 bayonet Designed at 12.8v, 2.1 amp, 32 cp
Part No. T-E-TL90325YTurn Signal Lamp w/Arrow
130
Model 80 Bulb ReplaceableMulti-Function Ford
• Reflector lens with backupand license plate illumination
• One 1157 bulb forstop/tail/turn/licenseillumination, one 1156bulb for backup
• 2 stud mounting• replaces many Ford lamps• Replacement lens
TL99069R• 12V
Red Lamp with Ford Harness:Part No. T-E-TL80321R
Red with Universal Pigtail:Part No. T-E-TL80333R
Stop/Turn/TailModule• High impact plastic module box• Mounts in 11" x 5.12" hole• Contains 2 TL40202R lamps, 2 TL40700 grommets,
module box and harness.. 12VRH with 2 Stop/Turn/Tail: Part No. T-E-TL40743LH with 2 Stop/Turn/Tail: Part No. T-E-TL40742
Stop/Turn/TailModul With Flange• High impact plastic module box With Metal
Mounting Flange• Mounts in 11" x 5.12" hole• Contains 2 TL40202R lamps, 2 TL40700 grommets,
flange, module box and harness• 12V
RH with 2 Stop/Turn/Tail: Part No. T-E-TL40747LH with 2 Stop/Turn/Tail: Part No. T-E-TL40746Metal Mounting Flange: Part No. T-E-TL40721Module Box: Part No. T-E-TL40722
Stop/Turn/TailModule With Side Marker• Metal module box with side marker and reflector• Universal mount will retrofit a wide variety of vehicles• Contains 2 TL40202R , 1 TL19200R marker lamp,
2 TL40700 grommets, flange, and harness• Total width including side marker 13.5", height 7.75"• 12V
RH Module: Part No. T-E-TL40757LH Module: Part No. T-E-TL40756
Metal Stop/Turn/Tail Module With Side Marker• Metal module box with side marker and turn signal
RH Module: Part No. T-E-TL40763LH Module: Part No. T-E-TL40762
Metal Stop/Turn/Tail/Backup Module With SideMarker
• Metal module box with side marker and backup lamps• Designed for straight trucks• Contains 1 TL21201R S/M lamp, 1 TL40242R SST
lamp, 1 TL40241Y TS lamp, 1 TL40244 BU lamp,3 TL40700 grommets, and harness
• Total width including side marker 21.5", height 3.625"• 12V
RH Module: Part No. T-E-TL40790LH Module: Part No. T-E-TL40791
TRUCK-LITE STOP/TURN/TAIL LIGHTING
Universal Pigtail Shown
131
Power Unit ModuleHeavy gauge metal module with preassembled junctionbox with wiring harness. Contains two TL40242R Super40 stop/turn/tail lamps, one TL40204 Model 40 backuplamp, TL19206 Model 19 license plate lamp, junction boxand wiring harness. 8.34" x 32.00"Part No. T-E-TL40850
Super 40 4" Sealed Turn Signal WithSingle Filament Bulb• Unique shock mount design
prolongs bulb life.• Lens and housing are sealed• Lamp mounts in 41/2" hole using
vinyl grommet.• 12V
Yellow Super Lamp Only:Part No. T-E-TL40241Y
Super 40 4" Sealed Turn Signal or TailWith Single Filament Bulb
• Unique shock mount design prolongs bulb life.• Lens and housing are sealed• Lamp mounts in 41/2" hole using
vinyl grommet.• 12V
Red Lamp Kit:Part No. T-E-TL40001R
Red Sealed Lamp Only:Part No. T-E-TL40201R
Yellow Sealed Lamp Only:Part No. T-E-TL40201Y
Model 81 Bulb replaceable Turn Signal• Flush mount with recessed lens.• Black steel housing with one
1156 single filament bulb• Flange O. D. 5.5"• Replacement
lens TL99008R• 12V
Part No. T-E-TL81300R
Model 60 Sealed Turn Signal Lamp• Polycarbonate lens and housing are sealed• 12V Shock mounted single filament bulb• Legal when mounted horizontal or vertical.
2.25" x 6.375" including grommet
Red Lamp Kit:Part No. T-E-TL60001R
Kit includes lamp, TL60700 grommet,TL94992 plugLamp Only: Part No. T-E-TL60201R or Y
Part No. T-E-TL60207R or Y (Diamond Shell)
Model 60 Sealed Mid Trailer Side Turn Lamp• Lens and housing are sealed• Contains heavy duty shock mounted dual filament
bulb• Reflectorized lens
Red Lamp Kit (Rear): Part No. T-E-TL60015RYellow Lamp Kit: Part No. T-E-TL60015YLamp kits include TL60700 grommet, TL94993 plugand lampRed Lamp Only: Part No. T-E-TL60215RYellow Lamp Only: Part No. T-E-TL60215Y
Part No. T-E-GR62011Replacement Lens:Part No. T-E-GR90221Replacement Snap Ring:Part No. T-E-GR99593
3.875" DiameterSingle filament 1156 bulb
Bulb ReplaceableBack-Up Lamp
• Snap-in low profile lens• #573 12V
single filament bulb• Flush mount
Part No. T-E-TL203082.59" x 3.80"Note: Two lamps must be
used to meet FederalLighting Regulations
Stainless Steel Mid-Trailer Warning Panel• 300 series noncorrosive stainless steel panel.• Includes lamp with easy cleaning smooth arrow lens.• Panel measures 20" x 8" x 1".• Can be mounted left or right hand. 1156 bulb.
Part No. T-E-1010132
133
Adaptor Ring For 4" LampsHigh impact plastic. Converts4.75" hole to a 4.50" hole formounting 4" sealed lampsPart No. T-E-TL50831
Grommet Mount Kitfor 4" LampsVinyl grommet for mounting 4"diameter sealed lamps in a4.5" hole.Grommet Mount KitPart No. T-E-TL40403Grommet OnlyPart No. T-E-TL40700
Model 40 Mounting BracketBlack painted reinforced steelwith 4.5" hole for mounting4" lamps. Part No. T-E-TL40720
Model 60 Grommet Mount KitMounting kit consisting ofgrommet and plugPart No. T-E-TL60403Grommet OnlyPart No. T-E-TL60700
Model 60 Mounting BracketGray painted steel for mountingTL60700 grommet."Z" configurationdesigned for usewith TL60015Yside turn light.Part No. T-E-TL60728
Model 60 Mounting BracketGray painted steel for mountingthe TL60700 grommet. Containsa set of clamps for ease ofinstallation of TL60015Y side turnlight. For most trailers, drillingand welding not required forinstallation.Part No. T-E-TL60729
TRUCK-LITE LIGHT MOUNTING ACCESSORIES
Mounting Covers For 2'’ Lamps• Grommet cover designed to enhance appearance of lamps• Flange cover offers improved theft resistance of flanged models• Two screws required• Material: Polished stainless steel cover
Part No. T-E-TL30708 Cover Flange
134
BACK-UP LAMPS
Model 60 Sealed Back-Up Lamp• Polycarbonate lens and housing• Heavy duty shock mounted 12V single filament bulb• can be mounted horizontally or vertically
Clear Lamp Kit: Part No. T-E-TL60004Kit includes TL60204 lamp, TL60700 grommet, TL94992 plugClear Lamp Only: Part No. T-E-TL60204
Super 40 4" SealedBack-Up Lamp
• Polycarbonate lens andhousing
• Shock mounted 12Vsingle filament bulb
• For grommet mountinstallation
Part No. T-E-TL40244
Model 40 4" SealedBack-Up Lamp With
Flange• Polycarbonate lens and
housing• Shock mounted 12V
single filament bulb• For grommet mount
installationClear Lamp Kit:Part No. T-E-TL40024 Kit includes TL40224
lamp, TL92994 plug
2.25" x 6.375"including grommet
VIBAR® License light• Lexan® housing and lens• All internal parts stainless
steel or tinned brass.• VIBAR sicket protects
168 bulb from shock• Mounts on 3.5" centers
Part No. T-E-PM436
2" Diameter Twist-InFactory SealedLicense Lamp
• Integral lamp hood andmounting receptacle
• All lexan• Mounts on 2.625"
centersPart No. T-E-GR60191
Duramold License Lamp• Compact license lamp that
protrudes less than 2"• Nonbreakable lens,
4 cp bulb• Mounts on 1.75" centers• 1.625" H X 2.625" W
Turtle-Back II License Lamp• Weathertight lens gasket seal• Impact resistant
bulb contacts• Waterproof
pin connections• Used on Utility Trailers• Mounting holes on
4.813" centersPart No. T-E-GR60331
Compact Courtesy Lamp• 1.5" Diameter• Fits 1.25" hole in panels from .060" to .250" thick• Rubber sealed spring and pigtail assembly• Translucent white plastic lens with chrome shade
Part No. T-E-GR60101
Model 15 RectangularSealed Lamp
• Polycarbonate lens andhousing are sealed
• 15,000 hour bulb• 1.20" X 2.49"
Part No. TL15200C
Model 15 License lamp Mounting Bracket Kit• Includes one TL15729 bracket
and one TL15208 lamp• Mounting holes on
2" centers• 3.38" wide• Projects 2.26" from
mounting surface
Part No. T-E-TL15011Part No. T-E-TL15040 Gray, kit w/ 12v LED 15040
Model 17 Sealed License Plate Lamp• Polycarbonate lens and housing are sealed• Mounting holes on 2.70" centers• 3.125" wide, 1.920" high
Lamp Kit With 90 Degree AngleHot Wire:
Part No. T-E-TL17001Lamp Kit WithStraight Hot Wire:
Part No. T-E-TL17002Clear Sealed Lamp Only:
Part No. T-E-TL17200
Model 19 Double BulbSealed Lamp
• Polycarbonate lens andhousing are sealedClear Utility Lamp:
Part No. T-E-TL19200CClear License Plate Lamp:
Part No. T-E-TL19206
Super 21 SealedLicense Plate Lamp
• Polycarbonate lens and housing are sealed• Bulb life is lengthened
through use of bulbshock mount
Clear Lamp Kit:Part No. T-E-TL21004C
Clear Sealed Unit Only:Part No. T-E-TL21204C
Model 26 Bulb replaceable License Plate Lamp• Cadmium plated steel housing• Mounts on 2" centers• Contains one 67 bulb
Clear Lamp Kit:Part No. T-E-TL26330
Clear Sealed Unit Only:Part No. T-E-TL21204C
Model 26 Bulb replaceable License Plate Lamp• High impact gray plastic housing• Mounts on 1.75" centers• Contains one 67 bulb
Clear Lamp:Part No. T-E-TL26335
Model 42License Plate Bracket
• Black painted steel• Universal mount• Legal with TL15208 or TL15209 license lamps
Clear Lamp:Part No. T-E-TL42722
136
Model 26 Bulb ReplaceableLicense Plate/Courtesy Lamp
• Chrome plated brass housing• Snap fits into 1.25" hole• Contains one 67 bulb
Clear Lamp:Part No. T-E-TL26331
Model 26 Bulb Replaceable License Plate/Utility Lamp• Chrome plated steel lens shade• Similar to lamps used on GM vehicles• Contains one 67 bulb• Two lamps required
5.875" square, largeenough to cover mostexisting holesPart No. T-E-GR61221
Round Dome Lamp With Switch• Surface mount• Corrosion- shatter -heat proof• Low profile to protect
against knock-off• 5.875" diameter• Snap-off lens for easy
bulb replacementPart No. T-E-GR61161
Model 80 5" Dome Lamp• Chrome plated steel housing• One 1156 bulb• 6.380" Diameter
Replacement lensTL99080C clear,TL99082C clear with hole
Light w/Switch Light w/o SwitchPart No. T-E-TL80350 Part No. T-E-TL80351
Model 80 7" Dome Lamp• Chrome plated steel housing• Push type on/off switch• One 1156 bulb• 8.250" Diameter
Replacement lensTL99088C clear,
Part No. T-E-TL80354
Model 40 4" Sealed Dome Lamp• Polycarbonate lens and
housing are sealed.• Heavy duty
shock-mounted bulb• Clear, sealed lamp only
Part No. T-E-TL40203
Model 10, 2.5" Sealed Dome Lamp
• Polycarbonate lens andhousing are sealed.
• Clear, sealed lamp onlyPart No. T-E-TL10202C
Model 30, 2" Sealed Utility Lamp
• Polycarbonate lens andhousing are sealed.
• Clear, sealed lamp onlyPart No. T-E-TL30200C
Part No. T-E-GR61511
• Operates in temperatures from -25 - +125 degrees
• Exceeds requirements for SAE J1455• Excellent for use on refrigerated trailers• Comes with in-line 3A fuseMaterial : DURAMOLD®, Finish: White,Voltage/Amp: 12.8 V - 1.87 AMPS - 24 WattsAccessory: Bulb: 92911, Lens: 92901
Recessed Fluorescent Dome Lamp
137
UTILITY AND WORK LAMPSPar 36 Rubber Tractor and Utility Lamp