Wiring for WirelessTM with Twisted Pair Cabling ... - Oberon …oberoninc.com/images/WebDocs/Oberon_Presentation_Wiring_for... · with Twisted Pair Cabling BreeMurphy, RCDD Applications

Wiring for WirelessTM

with Twisted Pair CablingBree Murphy, RCDDApplications Engineer

Oberon, Inc.


with Twisted Pair CablingBree Murphy, RCDDApplications Engineer

Oberon, Inc.

Effective ______________, BICSI recognizes Wiring for WirelessTM Part 1 training for the following BICSI Continuing Education Credits (CECs).

RCDD RITP ESS NTS OSP WD Installer 2 Cu/Fiber

Technician Cert. Trainer

1 1 1 1 1 1 1

“Note: Recognition of BICSI CECs does not mean that BICSI endorses, accredits, approves, or sanctions a course in any way.CECs are assigned based upon represented course content only and are not the result of an in-depth evaluation of instructional quality.”

- WiFi Infrastructure mounting solutions for a professional and secure installation

- Designed and tested by wireless engineers!

- Widest selection of installation solutions in the industry

• Secure

• Convenient

• Aesthetic

- WiFi Infrastructure mounting solutions for a professional and secure installation

- Designed and tested by wireless engineers!

- Widest selection of installation solutions in the industry

• Secure

• Convenient

• Aesthetic

Aruba NetworksEcosystem Partner

Aruba NetworksEcosystem Partner

Cisco SolutionsPartner

Cisco SolutionsPartner

Wiring for WirelessTMWiring for WirelessTM

AgendaPart I

Growth in the Mobile Data and WiFi Market

TSB-162-A Cabling Guidelines for Wireless Access Points

Planning the Wiring Infrastructure for Wireless LANThe BIG 6 concerns to consider!

Part II

Special Considerations for Different Verticals:Hospitals Public VenuesSchools Stadiums

AgendaPart I

Growth in the Mobile Data and WiFi Market

TSB-162-A Cabling Guidelines for Wireless Access Points

Planning the Wiring Infrastructure for Wireless LANThe BIG 6 concerns to consider!

Part II

Special Considerations for Different Verticals:Hospitals Public VenuesSchools Stadiums


Global Mobile Traffic

• Grew 74% in 2015

• Will increase nearly eightfold by 2020.

• Per (CAGR) mobile data traffic will grow 53 percent eachyear for the next 4 years, reaching 30.6 Exabyte's permonth by 2020.

• By 2020 there will be 11.6 billion mobile-connected devices, including M2M modules—exceeding the world’s projected population at that time (7.8 billion). Interesting?

Global Mobile Traffic

• Grew 74% in 2015

• Will increase nearly eightfold by 2020.

• Per (CAGR) mobile data traffic will grow 53 percent eachyear for the next 4 years, reaching 30.6 Exabyte's permonth by 2020.

• By 2020 there will be 11.6 billion mobile-connected devices, including M2M modules—exceeding the world’s projected population at that time (7.8 billion). Interesting?

Cisco VNI 2019 ForecastCisco VNI 2019 ForecastCisco VNI 2019 Forecast


Source: Cisco VNI Mobile, 2016

IP Traffic by Access TechnologyIP Traffic by Access TechnologyIP Traffic by Access Technology


Global Mobile Growth by Device typeGlobal Mobile Growth by Device typeGlobal Mobile Growth by Device type

Figures in parentheses refer to 2015, 2020 device share.Dominating traffic?

Source: Cisco VNI Mobile, 2016



Fundamentals:

TIA-TSB-162-A

Cabling Guidelines for Wireless Access Points


Fundamentals:

TIA-TSB-162-A

Cabling Guidelines for Wireless Access Points

TSB-162-A –Guidelines for Wireless

Telecommunications Systems Bulletin TSB162-A Telecommunications Cabling Guidelines for Wireless Access Points (APs)

Provides guidelines - Topology- Design- Installation- Testing of cabling infrastructure

All to support the WLAN

TSBTSB--162162--A A ––Guidelines for Wireless Guidelines for Wireless

Telecommunications Systems Bulletin TSB162Telecommunications Systems Bulletin TSB162--A A Telecommunications Cabling Guidelines for Wireless Access PointsTelecommunications Cabling Guidelines for Wireless Access Points (APs)(APs)

Provides guidelines Provides guidelines -- TopologyTopology-- DesignDesign-- InstallationInstallation-- Testing of cabling infrastructure Testing of cabling infrastructure

All to support the WLANAll to support the WLAN

TSB-162-A Guidelines for Wireless

“TSB-162-A states” that cabling (for wireless access points) should be installed and performance tested per existing 568-C.2 standards.

“Determination of exact cell size and placement of the wireless access point (WAP) is outside the scope of the TSB (perform a site survey or simulation).”

TSBTSB--162162--A Guidelines for WirelessA Guidelines for Wireless

““TSBTSB--162162--A statesA states”” that cabling (for wireless access that cabling (for wireless access points) should be installed and performance tested points) should be installed and performance tested per existing 568per existing 568--C.2 standards.C.2 standards.

““Determination of exact cell size and placement of the wireless Determination of exact cell size and placement of the wireless access point (WAP) is outside the scope of the TSB (perform a access point (WAP) is outside the scope of the TSB (perform a site survey or simulation).site survey or simulation).””

TSB-162-A Pre-Cabling Guidelines for Wireless Access PointsTSBTSB--162162--A A PrePre--CablingCabling Guidelines Guidelines for Wireless Access Pointsfor Wireless Access Points

r=13m(42 ft)

Hmax=80 m(262 ft)

Patch=6m(20 ft)

TO

AP

TR

EQUIPMENT(switch)

Lmax=13 m(42 ft)

3,600 sq.ft. square cell

5,540 sq.ft. circular cell

TO

TO

TO

TO

X=18.3 m(60 ft)

Meeting room

Equipment in the Telecom Room

TSB-162-A Pre-Cabling Guidelines for Wireless Access PointsTSBTSB--162162--A PreA Pre--Cabling Guidelines Cabling Guidelines for Wireless Access Pointsfor Wireless Access Points

TSB-162-A Cabling Guidelines for Wireless Access PointsContinued…

• Consider maintenance and security of the APs.

• The use of an enclosure is recommended in areas wherephysical security is a concern.

- Metal housing or non metallic housing, lockable- Hinged door for easy removal during upgrades- Low visual profile for aesthetics- Should provide knockouts for cable installation- Suitable brackets for wall or ceiling

TSBTSB--162162--A Cabling Guidelines A Cabling Guidelines for Wireless Access Pointsfor Wireless Access PointsContinuedContinued……

•• Consider maintenance and security of the APs.Consider maintenance and security of the APs.

•• The use of an enclosure is recommended in areas whereThe use of an enclosure is recommended in areas wherephysical security is a concern. physical security is a concern.

-- Metal housing or non metallic housing, lockableMetal housing or non metallic housing, lockable-- Hinged door for easy removal during upgradesHinged door for easy removal during upgrades-- Low visual profile for aestheticsLow visual profile for aesthetics-- Should provide knockouts for cable installationShould provide knockouts for cable installation-- Suitable brackets for wall or ceilingSuitable brackets for wall or ceiling

Planning the Wiring Infrastructure

for Wireless LAN

Planning the Wiring Infrastructure

for Wireless LAN


Challenge Statement:

Provide a Wired infrastructure for a wireless LAN which will last for at least 15 years.

Here are the BIG 6!

Challenge Statement:

Provide a Wired infrastructure for a wireless LAN which will last for at least 15 years.

Here are the BIG 6!


6 facts to consider:

1) The access points will be physically swapped out every 3-5 years

2) The access point’s throughput will increase by a factor of 10Xevery 5 years

3) The access point’s power requirement, supplied by Power overEthernet (PoE), will increase

4) The access point (AP) density will increase, requiring additionalcabling to new AP locations

5) The wireless LAN will provide additional services in the future whichare not clearly defined at this moment, including VoWiFi, locationbased services, telemetry and others.

6) Network PHY and MAC standards evolving

6 facts to consider:

1) The access points will be physically swapped out every 3-5 years

2) The access point’s throughput will increase by a factor of 10Xevery 5 years

3) The access point’s power requirement, supplied by Power overEthernet (PoE), will increase

4) The access point (AP) density will increase, requiring additionalcabling to new AP locations

5) The wireless LAN will provide additional services in the future whichare not clearly defined at this moment, including VoWiFi, locationbased services, telemetry and others.



1) Why are access points going to be physicallyreplaced every 3-5 years?

Emerging wireless (IEEE 802.11__ __) standards

Improvements in signal processing technology (I.E MU-MIMOversus SU-MIMO- see next slide)

Improvements in throughput due to added unlicensedspectrum

Emerging capabilities and features in the access point

1) Why are access points going to be physicallyreplaced every 3-5 years?

Emerging wireless (IEEE 802.11__ __) standards

Improvements in signal processing technology (I.E MU-MIMOversus SU-MIMO- see next slide)

Improvements in throughput due to added unlicensedspectrum

Emerging capabilities and features in the access point

Single-User Multiple Input-Multiple Output (SU-MIMO)- 3 Spatial Streams (3SS) serve only 1 client at a time

Multi-User Multiple Input-Multiple Output (MU-MIMO) User- 3 Spatial Streams (3SS) serve three 1 SS clients at a time

Single-User Multiple Input-Multiple Output (SU-MIMO)- 3 Spatial Streams (3SS) serve only 1 client at a time

Multi-User Multiple Input-Multiple Output (MU-MIMO) User- 3 Spatial Streams (3SS) serve three 1 SS clients at a time

Cisco will ride the 802.11ac Wave2, Bill Rubino, Cisco Mobility blog


SU-MIMO vs MU-MIMOWiring for WirelessTM

SU-MIMO vs MU-MIMO

1 Continued…


FCC Band allocations 5-6 GHzWiring for WirelessTM

FCC Band allocations 5-6 GHz

IEEE 802.11ac (both Wave 1 and Wave 2) provides:

Over 500 MHz of bandwidth in the 5 GHz band - ChoicesTwenty-five 20 MHz channelsTwelve 40 MHz channelsSix 80 MHz channelsTwo 160 MHz channels (Wave 2 only)

FCC may make an additional 250 MHz of bandwidth in the future!

IEEE 802.11ac (both Wave 1 and Wave 2) provides:

Over 500 MHz of bandwidth in the 5 GHz band - ChoicesTwenty-five 20 MHz channelsTwelve 40 MHz channelsSix 80 MHz channelsTwo 160 MHz channels (Wave 2 only)

FCC may make an additional 250 MHz of bandwidth in the future!

Courtesy of Peter Lane, Aruba Networks- Atmosphere 2015

1 Continued…

What’s the functional difference between 802.11ac Wave 1 and Wave 2?

Wave 1 products have been in use in the market for about 2.5 years.

Wave 2 builds upon Wave 1 with some very significant enhancements:

● Supports speeds to 2.34 Gbps (up from 1.3 Gbps) in the 5 GHz band● Supports multiuser multiple input, multiple output (MU-MIMO)● Offers the option of using 160-MHz-wide channels for greater performance● Offers the option of using a fourth spatial stream for greater performance● Can run in additional 5-GHz bands around the world


1 Continued…


IEEE 802.11acWiring for WirelessTM

IEEE 802.11ac

What cable category is required to support thefollowing?

• IEEE 802.11ac (both Wave 1 and Wave 2)

• IEEE 802.11a(x)

• Other technologies

What cable category is required to support thefollowing?

• IEEE 802.11ac (both Wave 1 and Wave 2)

• IEEE 802.11a(x)

• Other technologies

1 Continued…


Access Point ThroughputWiring for WirelessTM

Access Point Throughput

2) The access point’s throughput will increase by a factor of10X every 7.5 years, based on history

2) The access point’s throughput will increase by a factor of10X every 7.5 years, based on history

Wireless LANs - PoE's Killer AppPower over EthernetWireless LANs - PoE's Killer AppPower over Ethernet

3) WAP power is most often supplied by Power over EthernetPoE is on the increase

PoE IEEE 802.3af (802.3at Type 1) 2 Pairs 12.95W Exists today

PoE+ IEEE 802.3at Type 2 2 pairs 25.5W Exists today

PoE++Proposed IEEE 802.3bt Type 3 4 pairs 49W 2016

Proposed IEEE 802.3bt Type 4 4 pairs 96W 2016

Non PoE standards basedCisco UPOE 4 pairs 60W exists today

HDBaseT (www.hdbaset.org) 4 pairs 96W exists today

3) WAP power is most often supplied by Power over EthernetPoE is on the increase

PoE IEEE 802.3af (802.3at Type 1) 2 Pairs 12.95W Exists today

PoE+ IEEE 802.3at Type 2 2 pairs 25.5W Exists today

PoE++Proposed IEEE 802.3bt Type 3 4 pairs 49W 2016

Proposed IEEE 802.3bt Type 4 4 pairs 96W 2016

Non PoE standards basedCisco UPOE 4 pairs 60W exists today

HDBaseT (www.hdbaset.org) 4 pairs 96W exists today


Access Point DensityWiring for WirelessTM

Access Point Density

4) The access point density will increase, requiringadditional cabling to new AP locations in the future

“High density” Wi-Fi design is capacity-oriented, NOT coverageoriented

AP density in many hotels and residence halls is 1 AP for each room (Best practice) Continued….

4) The access point density will increase, requiringadditional cabling to new AP locations in the future

“High density” Wi-Fi design is capacity-oriented, NOT coverageoriented

AP density in many hotels and residence halls is 1 AP for each room (Best practice) Continued….




Per TIA 4966 Standard for Educational Facilities

Use 1 AP for every 25 occupants of classroom orauditorium

Per TIA 4966 Per TIA 4966 Standard for Educational FacilitiesStandard for Educational Facilities

Use 1 AP for every 25 occupants of classroom orUse 1 AP for every 25 occupants of classroom orauditoriumauditorium

4 Continued…




How Will the access point be mounted to ensure optimum performance?

Cabling and mounting the AP:

- Suspended ceiling - Plenum- Open ceiling- Hard ceiling - On the wall - In high density environment such as an auditorium

or stadium outdoors

How Will the access point be mounted to ensure optimum performance?

Cabling and mounting the AP:

- Suspended ceiling - Plenum- Open ceiling- Hard ceiling - On the wall - In high density environment such as an auditorium

or stadium outdoors

4 Continued…


Additional WiFi servicesWiring for WirelessTM

Additional WiFi services

5) The wireless LAN will provide additional services inthe future, which are not all clearly defined at thismoment

VoWiFi – Already in force

Location based services- higher AP density, 1>2,000sq ft

Telemetry

Blue tooth low energy (BLE)

Cellular and small cell coverage (off loading)

How will this impact the cabling and installation?

5) The wireless LAN will provide additional services inthe future, which are not all clearly defined at thismoment

VoWiFi – Already in force

Location based services- higher AP density, 1>2,000sq ft

Telemetry

Blue tooth low energy (BLE)

Cellular and small cell coverage (off loading)

How will this impact the cabling and installation?

Figures in parentheses refer to 2015, 2020 minutes of use share.Note: VoLTE and VoIP are mobile-specific; VoWiFi could be from any Wi-Fi connection. Circuit-switched mobile voice is excluded from the mix.Source: Cisco VNI Mobile, 2016


Additional WiFi servicesWiring for WirelessTM

Additional WiFi services

Mobile Voice, Minutes of Use by TechnologyMobile Voice, Minutes of Use by Technology5 Continued…


Standards EvolvingWiring for WirelessTM

Standards Evolving


1 Gb/s (CAT5e) and 10 Gb/s (CAT6A) standards

Link aggregation – more bandwidth, back up capabilities

NBase-T- Industry effort to create 2.5 Gb/s and 5 Gb/sEthernet over existing (CAT5e or CAT6) cable plant (802.3bz task force)

- Life of cable plant may be extended by new NBase-T standards


1 Gb/s (CAT5e) and 10 Gb/s (CAT6A) standards

Link aggregation – more bandwidth, back up capabilities

NBase-T- Industry effort to create 2.5 Gb/s and 5 Gb/sEthernet over existing (CAT5e or CAT6) cable plant (802.3bz task force)

- Life of cable plant may be extended by new NBase-T standards

WiFi ApplicationsWiFi Applications

Special considerations for different verticals

- Hospitals

- Schools

- Hotspots

- Large public venues and stadiums

Special considerations for different verticals

- Hospitals

- Schools

- Hotspots

- Large public venues and stadiums

Part 2

WiFi in HospitalsWiFi in Hospitals

• TIA 1179 – Healthcare Infrastructure Standard

• Hospitals have policies and procedures to mitigate AirborneInfectious Disease.

ICRA procedure simplification (don’t lift ceiling tiles)

HIPPA Compliance (secure the endpoints)

National Electric Code compliance (Plenum rated)

•BICSI 004 Supplemental Information- Guide to Medical Grade Wireless Utility

• TIA 1179 – Healthcare Infrastructure Standard

• Hospitals have policies and procedures to mitigate AirborneInfectious Disease.

ICRA procedure simplification (don’t lift ceiling tiles)

HIPPA Compliance (secure the endpoints)

National Electric Code compliance (Plenum rated)

•BICSI 004 Supplemental Information- Guide to Medical Grade Wireless Utility

Gap in the ceilingGap in the ceiling

ProblemAirborne Infectious Disease moves through plenum space to patient area through these gaps

ProblemAirborne Infectious Disease moves through plenum space to patient area through these gaps

Gap in the ceilingGap in the ceiling


WiFi in HospitalsWiring for WirelessTM

WiFi in Hospitals

Access Points mounted in ceiling enclosures permit :

APs to be installed without poking holes in ceiling tiles

Access to the access point without lifting ceiling tile

Helps simplify ICRA protocols, and they are plenum rated

Access Points mounted in ceiling enclosures permit :

APs to be installed without poking holes in ceiling tiles

Access to the access point without lifting ceiling tile

Helps simplify ICRA protocols, and they are plenum rated

WiFi in SchoolsWiFi in Schools

• 45% of school districts lack sufficient Wi-Fi capacity to move to one-to-one student-to-device deployments which is increasingly necessary to achieve modern digital learning objectives.

• In 2015, the FCC rebooted E-rate funding for robust Wi-Fi networks inside libraries and schools capable of supporting individualized learning

• Increasing the certainty and predictability of funding for Wi-Fi by expanding the five-year budget approach to providing more equitable support for internal connections – known as category two – through funding year 2019

• 45% of school districts lack sufficient Wi-Fi capacity to move to one-to-one student-to-device deployments which is increasingly necessary to achieve modern digital learning objectives.

• In 2015, the FCC rebooted E-rate funding for robust Wi-Fi networks inside libraries and schools capable of supporting individualized learning

• Increasing the certainty and predictability of funding for Wi-Fi by expanding the five-year budget approach to providing more equitable support for internal connections – known as category two – through funding year 2019


WiFi in SchoolsWiring for WirelessTM

WiFi in Schools

Access Points can be recessed into the ceiling with recessed mounting kits to provide a secure, aesthetic, and professional installation.

Access Points can be recessed into the ceiling with recessed mounting kits to provide a secure, aesthetic, and professional installation.

WiFi HotspotsWiFi Hotspots

• Globally, total public WiFi hotspots (including homespots) will grow sevenfold from 2015 to 2020, from 64.2 million in 2015 to 432.5 million by 2020

• Hotspots are installed to offer:– Public WiFi at private homes and offices– Cafés and restaurants, retail chains, hotels, – Airports, transportation stations, public venues, office buildings,

commercial spaces, etc. for customers and guests

• These installations must meet the physical security, accesscontrol, and aesthetics required for various venues

• Globally, total public WiFi hotspots (including homespots) will grow sevenfold from 2015 to 2020, from 64.2 million in 2015 to 432.5 million by 2020

• Hotspots are installed to offer:– Public WiFi at private homes and offices– Cafés and restaurants, retail chains, hotels, – Airports, transportation stations, public venues, office buildings,

commercial spaces, etc. for customers and guests

• These installations must meet the physical security, accesscontrol, and aesthetics required for various venues

Physically protect the WAP and antennaPhysically protect the WAP and antenna


HotspotsWiring for WirelessTM

Hotspots

Mount access points in the preferred horizontal orientation - whether in the ceiling or on the wall - rather than flat on the wall. All leading AP manufacturers recommend this.

Mount access points in the preferred horizontal orientation - whether in the ceiling or on the wall - rather than flat on the wall. All leading AP manufacturers recommend this.


HotspotsWiring for WirelessTM

Hotspots

• Plan for high density WAP installations. A professional installation will provide the physical security, code compliance,

and aesthetics mandated by the environment

• Plan for high density WAP installations. A professional installation will provide the physical security, code compliance,

and aesthetics mandated by the environment


RecommendationsWiring for WirelessTM

Recommendations

WiFi in Large Public Venues and StadiumsWiFi in Large Public Venues and Stadiums

• Anticipate new or re-designed WiFi infrastructure in all suchfacilities over the next few years

• WiFi designs in such venues are extraordinarily challenging

• Special Considerations for • Access Point mounting and protection• Access Point Density• Cabling • Environmental protection

• Anticipate new or re-designed WiFi infrastructure in all suchfacilities over the next few years

• WiFi designs in such venues are extraordinarily challenging

• Special Considerations for • Access Point mounting and protection• Access Point Density• Cabling • Environmental protection


• Access points and directive antennas may be mounted on the wall to provide zones of coverage

• Access points and directive antennas may be mounted on the wall to provide zones of coverage


Large Public Venues


Large Public Venues

And finally, Access points may be mounted beneath the seats to create smaller cells of coverage

And finally, Access points may be mounted beneath the seats to create smaller cells of coverage


Stadiums


Stadiums

Wiring for WirelessTM with Twisted Pair Cabling ... - Oberon …oberoninc.com/images/WebDocs/Oberon_Presentation_Wiring_for... · with Twisted Pair Cabling BreeMurphy, RCDD Applications

Documents