Watertite ® Plugs and Connectors LOCKING CONNECTOR CORD GRIP CONFIGURATION VOLTAGE BLADE (L) PLUG PART NO. 1, 2 PART NO. 1, 2 BODY SIZE NEMA L2-20 250V 26W07 27W07 F2 1 / 2" CALL US TODAY! 800-225-7724 WOODHEAD 69 68 WOODHEAD WIRING DEVICES WIRING DEVICES 20 AMP PLUGS AND CONNECTORS • 250V – 2-Pole, 2-Wire – NEMA L2-20 20 AMP PLUGS AND CONNECTORS • 250V – 2-Pole, 2-Wire – NEMA L2-20 www.woodhead.com SAFEWAY ® CONNECTOR SAFEWAY ® PLUG SUPER-SAFEWAY ® CONNECTOR WATERTITE ® PLUG WATERTITE ® CONNECTOR 1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126. 2 FOR EXTRA-HARD OUTDOOR USE, ORDER SUPER-SAFEWAY ® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NUMBER. 3 TO ORDER SAFEWAY ® DEVICE IN YELLOW ADD A “YL” SUFFIX TO THE WOODHEAD PART NO. 1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126. 2 FOR EXTRA-HARD OUTDOOR USE, ORDER WATERTITE ® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NUMBER. Super-Safeway ® Plugs and Connectors LOCKING CONNECTOR CONFIGURATION VOLTAGE BLADE (L) PLUG PART NO. 1, 2 PART NO. 1, 2 NEMA L2-20 250V 2607 2707 Safeway ® Plugs and Connectors 3 LOCKING CONNECTOR CONFIGURATION VOLTAGE BLADE (L) PLUG PART NO. 1 PART NO. 1 NEMA L2-20 250V 26T07 27T07 Watertite ® devices set the standard for the roughest, wettest and most abrasive of environ- ments. When properly mated with corresponding connectors, Watertite ® devices form an enclosure that meets the requirements of NEMA Type 4, 4X, 6 and 6P, IP65, 66 and 67, and can resist high-pressure hose-down up to 1,000 psi. Additional features include: Unique multiple ring seal that locks snugly, protecting against moisture and contaminants, sturdy compression-type cord grip that provides 205 lbs. of pull-out strength, and a protective closure cap that seals the connector when it is not in use. Product photos are intended to show device style only and are not intended to reflect indicated configurations. Configurations NEMA L2-20 MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS. FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269. MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS. FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269. Designed for rugged industrial and commercial use, Super-Safeway ® devices share some of the advanced design features of their Watertite ® counterparts. Their durable rubber housing resists heat, oil, impact, and chemicals. A patented self-centering cord clamp provides superior strain-relief for a range of cable sizes while speed screws aid in quick assembly of these dead- front back-wired devices pioneered by Woodhead. Safeway ® nylon plugs and connectors are Woodhead's economical solution for industrial and commercial applications. Product photos are intended to show device style only and are not intended to reflect indicated configurations. SUPER-SAFEWAY ® PLUG PREMADE CORDSETS AVAILABLE (SEE PAGE 71) WATERTITE ® RECEPTACLES AVAILABLE (SEE PAGE 70)
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Watertite® Plugs and ConnectorsLOCKING CONNECTOR CORD GRIP
CONFIGURATION VOLTAGE BLADE (L) PLUG PART NO.1, 2 PART NO.1, 2 BODY SIZENEMA L2-20 250V 26W07 27W07 F2 1⁄2"
CALL US TODAY! 800-225-7724 WOODHEAD 6968 WOODHEAD
WIRING DEVICES WIRING DEVICES
20 AMP PLUGS AND CONNECTORS• 250V – 2-Pole, 2-Wire – NEMA L2-20
20 AMP PLUGS AND CONNECTORS• 250V – 2-Pole, 2-Wire – NEMA L2-20
www.woodhead.com
SAFEWAY® CONNECTOR
SAFEWAY® PLUG
SUPER-SAFEWAY® CONNECTOR
WATERTITE® PLUG
WATERTITE® CONNECTOR
1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126.2 FOR EXTRA-HARD OUTDOOR USE, ORDER SUPER-SAFEWAY® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NUMBER.3 TO ORDER SAFEWAY® DEVICE IN YELLOW ADD A “YL” SUFFIX TO THE WOODHEAD PART NO.
1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126.2 FOR EXTRA-HARD OUTDOOR USE, ORDER WATERTITE® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NUMBER.
Super-Safeway® Plugs and Connectors LOCKING CONNECTOR
CONFIGURATION VOLTAGE BLADE (L) PLUG PART NO.1, 2 PART NO.1, 2
NEMA L2-20 250V 2607 2707
Safeway® Plugs and Connectors3
LOCKING CONNECTOR CONFIGURATION VOLTAGE BLADE (L) PLUG PART NO.1 PART NO.1
NEMA L2-20 250V 26T07 27T07
Watertite® devices set the standard for the roughest, wettest and most abrasive of environ-ments. When properly mated with corresponding connectors, Watertite® devices form anenclosure that meets the requirements of NEMA Type 4, 4X, 6 and 6P, IP65, 66 and 67, andcan resist high-pressure hose-down up to 1,000 psi. Additional features include: Uniquemultiple ring seal that locks snugly, protecting against moisture and contaminants, sturdycompression-type cord grip that provides 205 lbs. of pull-out strength, and a protective closure cap that seals the connector when it is not in use. Product photos are intended toshow device style only and are not intended to reflect indicated configurations.
Configurations
NEMA L2-20
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
Designed for rugged industrial and commercial use, Super-Safeway® devices share some of the advanced design features oftheir Watertite® counterparts. Their durable rubber housing resists heat, oil, impact, and chemicals. A patented self-centeringcord clamp provides superior strain-relief for a range of cable sizes while speed screws aid in quick assembly of these dead-front back-wired devices pioneered by Woodhead. Safeway® nylon plugs and connectors are Woodhead's economical solutionfor industrial and commercial applications. Product photos are intended to show device style only and are not intended toreflect indicated configurations.
SUPER-SAFEWAY® PLUG
PREMADE CORDSETSAVAILABLE (SEE PAGE 71)
WATERTITE® RECEPTACLESAVAILABLE (SEE PAGE 70)
WATERTITE® SINGLE FLIP LID WATERTITE® FLIP LID W/ MALE RECEPTACLE
WATERTITE® CONNECTOR FORFLIP LID W/ MALE RECEPTACLE
WATERTITE® CORDSET
SUPER-SAFEWAY® CORDSET
CALL US TODAY! 800-225-7724 WOODHEAD 7170 WOODHEAD
WIRING DEVICES WIRING DEVICES
20 AMP CORDSETS• 250V – 2-Pole, 2-Wire – NEMA L2-20
20 AMP RECEPTACLES• 250V – 2-Pole, 2-Wire – NEMA L2-20
www.woodhead.com
Watertite® Receptacles with Flip Coverplates
Safeway® Receptacles and Inlets
Cordset Options: Use the following chart to modify your part’s specifications. 12 & 14 gauge GFCI cordsets use SJOW cord.
FLIP LID CONNECTOR FORLOCKING SINGLE DUPLEX WITH MALE FLIP LID WITH
CONFIGURATION VOLTAGE BLADE (L) FLIP LID FLIP LID RECEPTACLE MALE RECEPTACLENEMA L2-20 250V 67W07 67W07DPLX 66W07 27W07MB
LOCKING FLANGEDCONFIGURATION VOLTAGE BLADE (L) FLANGED INLET RECEPTACLE
NEMA L2-20 250V 2607MB 2707MB
Watertite® Cordsets14-GAUGE 12-GAUGE SOW
CONFIGURATION VOLTAGE SOW CORDSETS CORDSETSNEMA L2-20 250V 26W07_142 26W07_122
14-GAUGE 12-GAUGE SOW CONFIGURATION VOLTAGE SOW CORDSETS CORDSETS
NEMA L2-20 250V 2607_142 2607_122
Super-Safeway® Cordsets
Factory pre-made Watertite® or Super-Safeway® cordsets are made from heavy-duty SOW cord and the appropriate connectorbodies that fit your environment. Product photos are intended to show style only and are not intended to reflect indicated configurations.
Woodhead meets your receptacle needs head-on. Single, duplex or motor-base receptaclesfor wet abusive environments are covered by Watertite® product solutions while generalindustrial applications are well served by nylon Safeway® receptacles. Watertite® recepta-cles feature spring-loaded flip lid covers with built-in lock-out/tag-out capabilities and the patented triple seal for the best in wet-location protection. Product photos are intendedto show device style only and are not intended to reflect indicated configurations.
Configurations
NEMA L2-20
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
WATERTITE® PLUGS AND CONNECTORS AVAILABLE (SEE PAGE 68)
SAFEWAY® PLUG
SAFEWAY® CONNECTOR
SUPER-SAFEWAY®
CONNECTOR
SUPER-SAFEWAY®
PLUG
WATERTITE® CONNECTOR
WATERTITE® PLUG
1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126.2 FOR EXTRA-HARD OUTDOOR USE, ORDER WATERTITE® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NUMBER.
WOODHEAD 73
WIRING DEVICES
www.woodhead.comCALL US TODAY! 800-225-772472 WOODHEAD
WIRING DEVICES
20 AMP PLUGS AND CONNECTORS• 125V – 2-Pole, 3-Wire – NEMA 5-20 / NEMA L5-20
Watertite® Plugs and ConnectorsLOCKING CONNECTOR CORD GRIP
CONFIGURATION VOLTAGE BLADE (L) PLUG PART NO.1, 2 PART NO.1, 2 BODY SIZENEMA 5-20 125V 14W33 15W33 F2 1⁄2"NEMA L5-20 125V 26W47 27W47 F3 3⁄4"
Safeway® Plugs and Connectors3
LOCKING CONNECTORCONFIGURATION VOLTAGE BLADE (L) PLUG PART NO.1 PART NO.1
NEMA 5-20 125V 5366 5369NEMA L5-20 125V 26T47 27T47
1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126.2 FOR EXTRA-HARD OUTDOOR USE, ORDER SUPER-SAFEWAY® DEVICES IN UV RESISTANT BLACK.
ADD “BLK” TO THE END OF THE PART NUMBER.3 TO ORDER SAFEWAY® DEVICE IN YELLOW ADD A “YL” SUFFIX TO THE WOODHEAD PART NO.
Super-Safeway® Plugs and ConnectorsLOCKING CONNECTOR
CONFIGURATION VOLTAGE BLADE (L) PLUG PART NO.1, 2 PART NO.1, 2
NEMA 5-20 125V 1433 1533NEMA L5-20 125V 2647 2747
Watertite® devices set the standard for the roughest, wettest and most abrasive of environments. When properly mated with corresponding connectors, Watertite® devicesform an enclosure that meets the requirements of NEMA Type 4, 4X, 6 and 6P, IP65, 66and 67, and can resist high-pressure hose-down up to 1,000 psi. Additional featuresinclude: Unique multiple ring seal that locks snugly, protecting against moisture and contaminants, sturdy compression-type cord grip that provides 205 lbs. of pull-outstrength, and a protective closure cap that seals the connector when it is not in use.Product photos are intended to show device style only and are not intended to reflect indicated configurations.
20 AMP PLUGS AND CONNECTORS• 125V – 2-Pole, 3-Wire – NEMA 5-20 / NEMA L5-20
SAFEWAY+® CONNECTOR
SAFEWAY+® PLUG
Safeway+® Plugs and Connectors
CONNECTOR CONFIGURATION VOLTAGE PLUG PART NO.1 PART NO.1
NEMA 5-20 125V 5366-RB 5369-RB
Configurations
NEMA 5-20
NEMA L5-20
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
PREMADE CORDSETSAVAILABLE (SEE PAGES 78-79)
RECEPTACLES AVAILABLE(SEE PAGES 76-77)
Designed for rugged industrial and commercial use, Super-Safeway® devices share some of the advanced design features of their Watertite® counterparts. Their durable rubber housing resists heat, oil, impact, and chemicals. A patented self-centering cord clamp provides superior strain-relief for a range of cable sizes while speed screws aid in quickassembly of these dead-front back-wired devices pioneered by Woodhead. New Safeway+®
wiring devices feature a 3-piece rubberized-nylon assembly that locks the device togetherwith just two screws for quick, easy assembly while providing durability and protection with a rubber-coated nylon design. Safeway® nylon plugs and connectors are Woodhead's economical solution for industrial and commercial applications. Product photos areintended to show device style only and are not intended to reflect indicated configurations.
LIGHTED DEVICES – CONNECTOR
20 AMP SPECIALTY PLUGS AND CONNECTORS• 125V – 2-Pole, 3-Wire – NEMA 5-20 / NEMA L5-20
CALL US TODAY! 800-225-7724 WOODHEAD 7574 WOODHEAD
WIRING DEVICES WIRING DEVICES
www.woodhead.com
20 AMP SPECIALTY PLUGS AND CONNECTORS• 125V – 2-Pole, 3-Wire – NEMA 5-20 / NEMA L5-20
Woodhead monitoring plugs and connectors let you determine whether or not a receptacleor extension cord is properly grounded and wired. It is the reliable and convenient way toreally put portable hand lamps, power tools, and equipment to the test. The GCM (groundcontinuity monitor) connector satisfies OSHA’s extension cord testing requirements underthe Assured Equipment Grounding Conductor Program. When proper continuity of thegrounding conductor is sensed, the connector will glow. By not lighting, the GCM connec-tor alerts the user that there is a problem. The monitoring plug indicates that a receptacleis properly grounded and wired when its bright LED shines continuously.
Woodhead meets your receptacle needs head-on. Single, duplex or motor-base receptaclesfor wet abusive environments are covered by Watertite® product solutions while generalindustrial applications are well served by nylon Safeway® receptacles. Watertite® recepta-cles feature spring-loaded flip lid covers with built-in lock-out/tag-out capabilities and the patented triple seal for the best in wet-location protection. Product photos are intendedto show device style only and are not intended to reflect indicated configurations.
WATERTITE® FLIP LID W/ MALE RECEPTACLE
WATERTITE® SINGLEGFCI RECEPTACLE
WATERTITE® DUPLEXGFCI RECEPTACLE
CONFIGURATION VOLTAGE TYPE RECEPTACLE PART NO.NEMA 5-20 125V DUPLEX 60W33DPLXGFNEMA L5-20 125V SINGLE 67W47GF
Watertite® Single & Duplex GFCI Receptacle
CONFIGURATION VOLTAGE OUTLET PART NO.NEMA 5-20 125V 633
Watertite® Pigtail Outlet
SAFEWAY® FLANGED RECEPTACLESAFEWAY® FLANGED INLET
SAFEWAY® DUPLEX RECEPTACLE SAFEWAY® SINGLE RECEPTACLE
Safeway® Receptacles and Inlets
Configurations
NEMA 5-20
NEMA L5-20
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
WATERTITE® PLUGS AND CONNECTORS AVAILABLE (SEE PAGE 72)
Factory pre-made Watertite® or Super-Safeway® cordsets are made from heavy-duty SOWcord and the appropriate connector bodies that fit your environment. Product photos areintended to show style only and are not intended to reflect indicated configurations.
MOLDED Y CORDSET MOLDED W CORDSETCONFIGURATION VOLTAGE STANDARD WITH IN-LINE GFCI1 STANDARD WITH IN-LINE GFCI1
WATERTITE® MOLDED Y CORDSET WATERTITE® MOLDED W CORDSET
CALL US TODAY! 800-225-7724 WOODHEAD 7978 WOODHEAD
WIRING DEVICES WIRING DEVICES
www.woodhead.com
20 AMP SPECIALTY CORDSETS• 125V – 2-Pole, 3-Wire – NEMA 5-20 / NEMA L5-20
Molded “Y” and “W” cordsets are high quality, custom-made adapters that provide multiple outlets from a single source. Theyare made from heavy-duty SOW cord and the appropriate connector bodies that fit your environment. When ordering customcordsets, the amperage and voltage of the plug must be equal to or greater than that of the connectors. Approximate overalllength of the product is 3 ft. Product photos are intended to show device style only and are not intended to reflect indicatedconfigurations.
MOLDED Y CORDSET MOLDED W CORDSETCONFIGURATION VOLTAGE STANDARD WITH IN-LINE GFCI1 STANDARD WITH IN-LINE GFCI1
1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126.2 FOR EXTRA-HARD OUTDOOR USE, ORDER SUPER-SAFEWAY® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NUMBER.3 TO ORDER SAFEWAY® DEVICE IN YELLOW ADD A “YL” SUFFIX TO THE WOODHEAD PART NO.
1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126.2 FOR EXTRA-HARD OUTDOOR USE, ORDER WATERTITE® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NUMBER.
Watertite® devices set the standard for the roughest, wettest and most abrasive of environ-ments. When properly mated with corresponding connectors, Watertite® devices form anenclosure that meets the requirements of NEMA Type 4, 4X, 6 and 6P, IP65, 66 and 67,and can resist high-pressure hose-down up to 1,000 psi. Additional features include:Unique multiple ring seal that locks snugly, protecting against moisture and contami-nants, sturdy compression-type cord grip that provides 205 lbs. of pull-out strength, and aprotective closure cap that seals the connector when it is not in use. Product photos areintended to show device style only and are not intended to reflect indicated configurations.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
PREMADE CORDSETSAVAILABLE (SEE PAGE 83)
WATERTITE® RECEPTACLESAVAILABLE (SEE PAGE 82)
Designed for rugged industrial and commercial use, Super-Safeway® devices share some of the advanced design features oftheir Watertite® counterparts. Their durable rubber housing resists heat, oil, impact, and chemicals. A patented self-centering cord clamp provides superior strain-relief for a range of cable sizes while speed screws aid in quick assembly ofthese dead-front back-wired devices pioneered by Woodhead. New Safeway+® wiring devices feature a 3-piece rubberized-nylon assembly that locks the device together with just two screws for quick, easy assembly while providing durability andprotection with a rubber-coated nylon design. Safeway® nylon plugs and connectors are Woodhead's economical solution forindustrial and commercial applications. Product photos are intended to show device style only and are not intended to reflectindicated configurations.
Factory pre-made Watertite® or Super-Safeway® cordsets are made from heavy-duty SOW cord and the appropriate connectorbodies that fit your environment. Product photos are intended to show style only and are not intended to reflect indicatedconfigurations.
Cordset Options: Use the following chart to modify your part’s specifications. 12 & 14 gauge GFCI cordsets use SJOW cord.
Watertite® Cordsets
Super-Safeway® Cordsets
14-GAUGE 12-GAUGE SOW CONFIGURATION VOLTAGE SOW CORDSETS CORDSETS
Woodhead meets your receptacle needs head-on. Single, duplex or motor-base receptaclesfor wet abusive environments are covered by Watertite® product solutions while generalindustrial applications are well served by nylon Safeway® receptacles. Watertite® recepta-cles feature spring-loaded flip lid covers with built-in lock-out/tag-out capabilities and the patented triple seal for the best in wet-location protection. Product photos are intendedto show device style only and are not intended to reflect indicated configurations.
FLIP LID CONNECTOR FORLOCKING SINGLE WITH MALE FLIP LID WITH
Watertite® devices set the standard for the roughest, wettest and most abrasive of environ-ments. When properly mated with corresponding connectors, Watertite® devices form anenclosure that meets the requirements of NEMA Type 4, 4X, 6 and 6P, IP65, 66 and 67, and can resist high-pressure hose-down up to 1,000 psi. Additional features include:Unique multiple ring seal that locks snugly, protecting against moisture and contami-nants, sturdy compression-type cord grip that provides 205 lbs. of pull-out strength, and a protective closure cap that seals the connector when it is not in use. Product photos areintended to show device style only and are not intended to reflect indicated configurations.
CALL US TODAY! 800-225-7724 WOODHEAD 8584 WOODHEAD
WIRING DEVICES WIRING DEVICES
www.woodhead.com
SAFEWAY® CONNECTOR
SAFEWAY® PLUG
WATERTITE® PLUG
WATERTITE® CONNECTOR
Safeway® Plugs and Connectors3
1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126.2 FOR EXTRA-HARD OUTDOOR USE, ORDER SUPER-SAFEWAY® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NUMBER.3 TO ORDER SAFEWAY® DEVICE IN YELLOW ADD A “YL” SUFFIX TO THE WOODHEAD PART NO.
Super-Safeway® Plugs and Connectors
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
PREMADE CORDSETSAVAILABLE (SEE PAGE 87)
WATERTITE® RECEPTACLESAVAILABLE (SEE PAGE 86)
Designed for rugged industrial and commercial use, Super-Safeway® devices share some of the advanced design features oftheir Watertite® counterparts. Their durable rubber housing resists heat, oil, impact, and chemicals. A patented self-centeringcord clamp provides superior strain-relief for a range of cable sizes while speed screws aid in quick assembly of these dead-front back-wired devices pioneered by Woodhead. New Safeway+® wiring devices feature a 3-piece rubberized-nylon assemblythat locks the device together with just two screws for quick, easy assembly while providing durability and protection with arubber-coated nylon design. Safeway® nylon plugs and connectors are Woodhead's economical solution for industrial andcommercial applications. Product photos are intended to show device style only and are not intended to reflect indicated configurations.
1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126.2 FOR EXTRA-HARD OUTDOOR USE, ORDER WATERTITE® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NUMBER.
Watertite® Plugs and ConnectorsLOCKING CONNECTOR CORD GRIP
CONFIGURATION VOLTAGE BLADE (L) PLUG PART NO.1, 2 PART NO.1, 2 BODY SIZENEMA 6-20 250V 14W48 15W48 F2 1⁄2"NEMA L6-20 250V 26W48 27W48 F3 3⁄4"NEMA L7-20 277V 26W49 27W49 F3 3⁄4"
Configurations
NEMA 6-20
NEMA L6-20
NEMA L7-20
20 AMP PLUGS AND CONNECTORS• 250V – 2-Pole, 3-Wire – NEMA 6-20 / NEMA L6-20• 277V – 2-Pole, 3-Wire – NEMA L7-20
20 AMP PLUGS AND CONNECTORS• 250V – 2-Pole, 3-Wire – NEMA 6-20 / NEMA L6-20• 277V – 2-Pole, 3-Wire – NEMA L7-20
FLIP LID CONNECTOR FORLOCKING SINGLE DUPLEX WITH MALE FLIP LID WITH
CONFIGURATION VOLTAGE BLADE (L) FLIP LID FLIP LID RECEPTACLE MALE RECEPTACLENEMA 6-20 250V 60W48 60W48DPLX 59W48 15W48MBNEMA L6-20 250V 67W48 — 66W48 27W48MBNEMA L7-20 277V 67W49 — 66W49 27W49MB
WOODHEAD 87
WIRING DEVICES
Factory pre-made Watertite® or Super-Safeway® cordsets are made from heavy-duty SOWcord and the appropriate connector bodies that fit your environment. Product photos areintended to show style only and are not intended to reflect indicated configurations.
www.woodhead.com
Cordset Options: Use the following chart to modify your part’s specifications. 12 & 14 gauge GFCI cordsets use SJOW cord.
CALL US TODAY! 800-225-772486 WOODHEAD
WIRING DEVICES
Watertite® Receptacles with Flip Coverplates
Safeway® Receptacles and Inlets
SAFEWAY® FLANGED INLET
WATERTITE® CORDSET
SUPER-SAFEWAY® CORDSET
SAFEWAY® SINGLE RECEPTACLESAFEWAY® FLANGED RECEPTACLES
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
Woodhead meets your receptacle needs head-on. Single, duplex or motor-base receptaclesfor wet abusive environments are covered by Watertite® product solutions while generalindustrial applications are well served by nylon Safeway® receptacles. Watertite® receptaclesfeature spring-loaded flip lid covers with built-in lock-out/tag-out capabilities and thepatented triple seal for the best in wet-location protection. Product photos are intended toshow device style only and are not intended to reflect indicated configurations.
20 AMP CORDSETS & SPECIALTY CORDSETS• 250V – 2-Pole, 3-Wire – NEMA 6-20 / NEMA L6-20
• 277V – 2-Pole, 3-Wire – NEMA L7-20
MOLDED Y CORDSET MOLDED W CORDSETCONFIGURATION VOLTAGE STANDARD WITH IN-LINE GFCI1 STANDARD WITH IN-LINE GFCI1
NEMA 6-20 250V 14W48-Y 14W48-Y-IN 14W48-W 14W48-W-IN
Watertite® Molded Cordsets
MOLDED Y CORDSET MOLDED W CORDSETCONFIGURATION VOLTAGE STANDARD WITH IN-LINE GFCI1 STANDARD WITH IN-LINE GFCI1
NEMA 6-20 250V 1448-Y 1448-Y-IN 1448-W 1448-W-IN
Watertite® Pigtail Outlet
1 STANDARD COLOR IS BLACK2 FOR CORROSION-RESISTANT RECEPTACLE, ADD “CR” SUFFIX TO THE PART NO. (E.G. 4949CR)3 STANDARD COLOR IS BROWN
Super Safeway® Molded Cordsets
WATERTITE® MOLDED Y CORDSET WATERTITE® MOLDED W CORDSET MOLDED Y CORDSET MOLDED W CORDSET
WATERTITE® CONNECTOR FORFLIP LID W/ MALE RECEPTACLE
WATERTITE® SINGLE FLIP LID WATERTITE® DUPLEX FLIP LID WATERTITE® FLIP LID W/ MALE RECEPTACLE
SAFEWAY® DUPLEX RECEPTACLE
1 IN-LINE GFCI CORDSETS USE SJOW CORD.
20 AMP PLUGS AND CONNECTORS• 125V/250V – 3-Pole, 4-Wire – NEMA L14-20• 250V – 3-Pole, 4-Wire, 3ø – NEMA L15-20• 480V – 3-Pole, 4-Wire, 3ø– NEMA L16-20
Watertite® devices set the standard for the roughest, wettest and most abrasive of environ-ments. When properly mated with corresponding connectors, Watertite® devices form anenclosure that meets the requirements of NEMA Type 4, 4X, 6 and 6P, IP65, 66 and 67, and can resist high-pressure hose-down up to 1,000 psi. Additional features include: Uniquemultiple ring seal that locks snugly, protecting against moisture and contaminants, sturdycompression-type cord grip that provides 205 lbs. of pull-out strength, and a protective closure cap that seals the connector when it is not in use. Product photos are intended toshow device style only and are not intended to reflect indicated configurations.
Configurations
NEMA L14-20
NEMA L15-20
NEMA L16-20
SAFEWAY® CONNECTOR
SAFEWAY® PLUG
SUPER-SAFEWAY® CONNECTOR
WATERTITE® PLUG
WATERTITE® CONNECTOR
1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126.2 FOR EXTRA-HARD OUTDOOR USE, ORDER WATERTITE® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NUMBER.
CALL US TODAY! 800-225-7724 WOODHEAD 8988 WOODHEAD
WIRING DEVICES WIRING DEVICES
www.woodhead.com
Super-Safeway® Plugs and Connectors
Safeway® Plugs and Connectors3
LOCKING CONNECTORCONFIGURATION VOLTAGE BLADE (L) PLUG PART NO.1, 2 PART NO.1, 2
1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126.2 FOR EXTRA-HARD OUTDOOR USE, ORDER SUPER-SAFEWAY® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NUMBER.3 TO ORDER SAFEWAY® DEVICE IN YELLOW ADD A “YL” SUFFIX TO THE WOODHEAD PART NO.
20 AMP PLUGS AND CONNECTORS• 125V/250V – 3-Pole, 4-Wire – NEMA L14-20• 250V – 3-Pole, 4-Wire, 3Ø – NEMA L15-20• 480V – 3-Pole, 4-Wire, 3Ø – NEMA L16-20
Designed for rugged industrial and commercial use, Super-Safeway® devices share some of the advanced design features oftheir Watertite® counterparts. Their durable rubber housing resists heat, oil, impact, and chemicals. A patented self-centering cord clamp provides superior strain-relief for a range of cable sizes while speed screws aid in quick assembly ofthese dead-front back-wired devices pioneered by Woodhead. New Safeway+® wiring devices feature a 3-piece rubberized-nylon assembly that locks the device together with just two screws for quick, easy assembly while providing durability andprotection with a rubber-coated nylon design. Safeway® nylon plugs and connectors are Woodhead's economical solution forindustrial and commercial applications. Product photos are intended to show device style only and are not intended to reflectindicated configurations.
Watertite® Plugs and ConnectorsLOCKING CONNECTOR CORD GRIP
CONFIGURATION VOLTAGE BLADE (L) PLUG PART NO.1, 2 PART NO.1, 2 BODY SIZENEMA L14-20 125V/250V 26W74 27W74 F3 3⁄4"NEMA L15-20 250V, 3ø 26W75 27W75 F3 3⁄4"NEMA L16-20 480V, 3ø 26W76 27W76 F3 3⁄4"
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
PREMADE CORDSETSAVAILABLE (SEE PAGE 91)
WATERTITE® RECEPTACLESAVAILABLE (SEE PAGE 90)
SUPER-SAFEWAY® PLUG
WATERTITE® CORDSET
SUPER-SAFEWAY® CORDSET
WOODHEAD 91
WIRING DEVICES
www.woodhead.comCALL US TODAY! 800-225-772490 WOODHEAD
WIRING DEVICES
Watertite® Cordsets
Super-Safeway® Cordsets
Cordset Options: Use the following chart to modify your part’s specifications.
14-GAUGE 12-GAUGE SOW CONFIGURATION VOLTAGE SOW CORDSETS CORDSETS
WATERTITE® CONNECTOR FORFLIP LID W/ MALE RECEPTACLE
WATERTITE® SINGLE FLIP LID
SAFEWAY® FLANGED INLET SAFEWAY® SINGLE RECEPTACLE
WATERTITE® FLIP LID W/ MALE RECEPTACLE
Woodhead meets your receptacle needs head-on. Single, duplex or motor-base receptaclesfor wet abusive environments are covered by Watertite® product solutions while generalindustrial applications are well served by nylon Safeway® receptacles. Watertite® recepta-cles feature spring-loaded flip lid covers with built-in lock-out/tag-out capabilities and the patented triple seal for the best in wet-location protection. Product photos are intendedto show device style only and are not intended to reflect indicated configurations.
Factory pre-made Watertite® or Super-Safeway® cordsets are made from heavy-duty SOW cord and the appropriate connectorbodies that fit your environment. Product photos are intended to show style only and are not intended to reflect indicated configurations.
SAFEWAY® FLANGED RECEPTACLE
Configurations
NEMA L14-20
NEMA L15-20
NEMA L16-20
1 FOR CORROSION-RESISTANT RECEPTACLE ADD “CR” SUFFIX TO THE WOODHEAD PART NO.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126.2 FOR EXTRA-HARD OUTDOOR USE, ORDER SUPER-SAFEWAY® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NO.3 TO ORDER SAFEWAY® DEVICE IN YELLOW ADD A “YL” SUFFIX TO THE WOODHEAD PART NO.
PREMADE CORDSETSAVAILABLE (SEE PAGE 95)
Watertite® devices set the standard for the roughest, wettest and most abrasive of environ-ments. When properly mated with corresponding connectors, Watertite® devices form anenclosure that meets the requirements of NEMA Type 4, 4X, 6 and 6P, IP65, 66 and 67, andcan resist high-pressure hose-down up to 1,000 psi. Additional features include: uniquemultiple ring seal that locks snugly, protecting against moisture and contaminants, sturdycompression-type cord grip that provides 205 lbs. of pull-out strength, and a protectiveclosure cap that seals the connector when it is not in use. Product photos are intendedto show device style only and are not intended to reflect indicated configurations.
20 AMP/3 PHASE PLUGS AND CONNECTORS• 120V/208V – 4-Pole, 5-Wire, 3ø – NEMA L21-20• 277V/480V – 4-Pole, 5-Wire, 3ø – NEMA L22-20• 347V/600V – 4-Pole, 5-Wire, 3ø – NEMA L23-20
Designed for rugged industrial and commercial use, Super-Safeway® devices share some of the advanced design features oftheir Watertite® counterparts. Their durable rubber housing resists heat, oil, impact, and chemicals. A patented self-centeringcord clamp provides superior strain-relief for a range of cable sizes while speed screws aid in quick assembly of these dead-front back-wired devices pioneered by Woodhead. Safeway® nylon plugs and connectors are Woodhead's economical solutionfor industrial and commercial applications. Product photos are intended to show device style only and are not intended toreflect indicated configurations.
WATERTITE® PLUG
1 FOR CORD RANGES AND CORD SPECIFICATIONS, SEE PAGE 126.2 FOR EXTRA-HARD OUTDOOR USE, ORDER WATERTITE® DEVICES IN UV RESISTANT BLACK. ADD “BLK” TO THE END OF THE PART NO.
Configurations
NEMA L21-20
NEMA L22-20
NEMA L23-20
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
WATERTITE® RECEPTACLESAVAILABLE (SEE PAGE 94)
20 AMP/3 PHASE RECEPTACLES• 120V/208V – 4-Pole, 5-Wire, 3ø – NEMA L21-20• 277V/480V – 4-Pole, 5-Wire, 3ø – NEMA L22-20• 347V/600V – 4-Pole, 5-Wire, 3ø – NEMA L23-20Woodhead meets your receptacle needs head-on. Single, duplex or motor-base receptaclesfor wet abusive environments are covered by Watertite® product solutions while generalindustrial applications are well served by nylon Safeway® receptacles. Watertite® recepta-cles feature spring-loaded flip lid covers with built-in lock-out/tag-out capabilities and the patented triple seal for the best in wet-location protection. Product photos are intendedto show device style only and are not intended to reflect indicated configurations.
WOODHEAD 95
WIRING DEVICES
20 AMP 3 PHASE CORDSETS• 120V/208V – 4-Pole, 5-Wire, 3ø – NEMA L21-20• 277V/480V – 4-Pole, 5-Wire, 3ø – NEMA L22-20• 347V/600V – 4-Pole, 5-Wire, 3ø – NEMA L23-20
www.woodhead.comCALL US TODAY! 800-225-772494 WOODHEAD
WIRING DEVICES
Watertite® Receptacles with Flip CoverplatesFLIP LID CONNECTOR FOR
LOCKING SINGLE WITH MALE FLIP LID WITH CONFIGURATION VOLTAGE BLADE (L) FLIP LID RECEPTACLE MALE RECEPTACLE
Factory pre-made Watertite® or Super-Safeway® cordsets are made from heavy-duty SOW cord and the appropriate connectorbodies that fit your environment. Product photos are intended to show style only and are not intended to reflect indicatedconfigurations.
Cordset Options: Use the following chart to modify your part’s specifications.
Super-Safeway® Cordsets
Safeway® Receptacles and Inlets
Configurations
NEMA L21-20
NEMA L22-20
NEMA L23-20
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.
MOST WOODHEAD PRODUCTS HAVE U.L. AND/OR CSA APPROVALS.FOR A LISTING OF APPROVALS BY PART NUMBER, SEE PAGES 262-269.